Database Info

build.prop update.zip

Is it possible to make an update.zip file that replaces the build.prop file, or any way to replace the build.prop file without doing a full restore?

I did it using adb commands.

Well I tried using adb shell to swap the file, but when I ran su I got "[1] + Stopped (signal) su"
So I guess I'm going to be forced to do a nadroid restore of my system

Just use root explorer to copy the file to /sd, then use astro to edit it, and root explorer it back to the original spot and reboot. You don't need to change file permissions or any thing. No computer needed.
Sent from my GT-I9000 using Tapatalk

Boot loop
Clienterror said:
Just use root explorer to copy the file to /sd, then use astro to edit it, and root explorer it back to the original spot and reboot. You don't need to change file permissions or any thing. No computer needed.
Click to expand...
Click to collapse
Hi Clienterror,
What if the system is not booting?
I had installed an application which changes resolution and now ended up with a boot loop.
I have searched for ways how to extract the build.prop and correct the error, but none appears to exist.
I was asking if it is possible to extract the current build.prop via the update.zip method so that the build.prop can be repaired...
I read that from the update.zip you can execute code, would it be possible to use a similar method for extracting files from the system folder?
Thanks

remuscat said:
Hi Clienterror,
What if the system is not booting?
I had installed an application which changes resolution and now ended up with a boot loop.
I have searched for ways how to extract the build.prop and correct the error, but none appears to exist.
I was asking if it is possible to extract the current build.prop via the update.zip method so that the build.prop can be repaired...
I read that from the update.zip you can execute code, would it be possible to use a similar method for extracting files from the system folder?
Thanks
Click to expand...
Click to collapse
You could just reflash your current ROM and it should replace it.

korockinout13 said:
You could just reflash your current ROM and it should replace it.
Click to expand...
Click to collapse
Hi korockinout13,
I have tried to refresh from a rom i got, but I am prompted an error with Nand version.
The android in question is not common (Subor, a chinese Android Tablet) and have not found any firmware for my particular model except for the one supplied by the supplier, which still does not install.
At this stage reflashing is not an option, so I am looking for something else...
Thanks for your time

P
remuscat said:
Hi Clienterror,
What if the system is not booting?
I had installed an application which changes resolution and now ended up with a boot loop.
I have searched for ways how to extract the build.prop and correct the error, but none appears to exist.
I was asking if it is possible to extract the current build.prop via the update.zip method so that the build.prop can be repaired...
I read that from the update.zip you can execute code, would it be possible to use a similar method for extracting files from the system folder?
Thanks
Click to expand...
Click to collapse
Actually there is a potential option... can you get into recovery? And does your recovery have a file manager? If so go into mounts and mount /system. Then use the file manager in recovery and you should be able to access build.prop. copy it to your SD and then you should be able to mount your SD to your computer through recovery.
Edit: when you mount /system make sure you mount the SD as well or you won't be able to copy to it while you're in the recovery file manager.
Sent from my SGH-I897 using xda app-developers app

Hi m1batt1,
The recovery does not have any file mount option
I have lost all hope of being able to get the system to boot.
Thanks the same.

remuscat said:
Hi m1batt1,
The recovery does not have any file mount option
I have lost all hope of being able to get the system to boot.
Thanks the same.
Click to expand...
Click to collapse
You might have to flash stock KK4 at this point and go from there.
What kernel do you have for it not to have a file mount? I believe even stock kernel has it Since you can get in download mode, I would flash a newer kernel if I were you (with Odin) to be able to mount in recovery.

remuscat said:
Hi korockinout13,
I have tried to refresh from a rom i got, but I am prompted an error with Nand version.
The android in question is not common (Subor, a chinese Android Tablet) and have not found any firmware for my particular model except for the one supplied by the supplier, which still does not install.
At this stage reflashing is not an option, so I am looking for something else...
Thanks for your time
Click to expand...
Click to collapse
BWolf56 said:
You might have to flash stock KK4 at this point and go from there.
What kernel do you have for it not to have a file mount? I believe even stock kernel has it Since you can get in download mode, I would flash a newer kernel if I were you (with Odin) to be able to mount in recovery.
Click to expand...
Click to collapse
From what I'm reading he doesn't even have a captivate. He's using some Chinese tablet.
Sent from my SGH-I897 using xda app-developers app

My Clockwork Recovery is not working? Only get triangle?

I installed clockwork recovery. It worked the first time.
Then I did a wipe data reset.
Now I only get the triangle logo :/
But the bootloader is unlocked :/
What is wrong?

Check under /system/etc and see if you have a file called:
Install-recovery.sh
If u do, delete it or change permissions to 000

snandlal said:
Check under /system/etc and see if you have a file called:
Install-recovery.sh
If u do, delete it or change permissions to 000
Click to expand...
Click to collapse
Thanks, exactly what happened to me today

This means you need to reinstall the recovery tool on your phone. I had the same problem with the stock ROM 'cause it will always delete the recovery tool when you restart your phone.
You can delete the install-recovery.sh like others have said or you can simply download a different ROM

Help please! Phone wont boot. Need adb expert.

Hey all. I did something silly and deleted a file in system/bin folder while troubleshooting a problem. I made a backup of the file before deleting it in sdcard/download but my phone wont boot so I can copy the backup file back to system/bin. I am able to get my phone into download mode and I believe I could copy the file via adb. However I do not know how to get adb to recognize the phone in download mode. I type...
adb devices
and it states "List of devices attached" and there is nothing under the list but when I plug my phone via USB it shows "SAMSUNG Mobile USB CDC Composite Device" in device manager so I know my pc is recognizing it. I have used adb before with batch files like 1click root and things like that so I know its just me not knowing the right commands to get my device recognized.
Any and all help is appreciated! I just need to copy 1 file from sdcard/download to system/bin and I would assume it would boot back up with no problem!
Thanks!

do u have cwm installed?

I just installed CWM v5.5.0.4 via download mode using this method. http://www.theandroidsoul.com/skyrocket-root-clockworkmod-cwm-recovery/
So now that I am in CWM I am trying to mount things like /system and it shows an error mounting /sdcard and I get that error messaging for mounting all except mount usb storage which works great. I was however able to get the file off my phone but now how do I get the file back to system/bin?

Yes.. you can (and really should) flash CWM from download mode via your PC/laptop. A few weeks ago I did something very similar and soft-bricked my SR by renaming an in-use file (framework-res.apk)... I also only had 3e, so couldn't just restore a nandroid or flash a rom zip. Go to the Dev section and find the thread by Copperhed ("Root the ATT SGH-I727 Skyrocket..."). read through the OP and follow instruction exactly. You will be Odin3 flashing just the CWM recovery partition... this will NOT trip your flash counter. If you are already rooted, you should retain root... if not, you can root via his OP. After you have CWM recovery, there's a way you can mount the sdcard so you can transfer files between your PC and SR... then, you can put the sbin file back and see if it reboots fine... if not, with CWM installed, you can flash (via zip.. not Odin) any rom/kernel/modem zip package you want.

Even though I installed CWM from a different source I thanked you anyways DoctorQMM! Now that I have CWM installed how to I transfer the file from my pc to the system/bin directory? I have been able to mount usb storage and it show up as a drive on my pc but when I mount /system nothing shows up. What am I missing?
Thanks for all your help! I am almost there! ^_^

hey, I recommended it first . Seriously though, download a kernel from the dev section, any kernel. Open it up in winrar, winzip, etc... and delete everything except the system folder. Now take the bin file u copied to ur computer and put it in a folder called bin. Put this bin in the kernel zip inside the system folder. Now delete everything else in the system folder. Put this file on a microsd, slip it in ur phone and flash it through cwm. this will put the bin back, and allow u to reboot phone

JDub... PM cdshepherd.... he's the one who shared with me you can use the mounts and storage option in cwm (then click "mount USB storage")... then you can copy files between your sd and computer without having to do what I did (which was pull external sd out of SR, mount in micro adapter, plugged into laptop and loaded files on the sd... then put sd back in phone.. booted into CWM and flashed the rom zip I put on there). Yes.. you are close! If you can't get that one file back to sbin on root, you could try to flash a stock rom/kernel zip (KK1 or LA3)... you only need to put that rom/kernel zip on your sd or external sd so CWM will see it.

icenight89 your right you provided the inspiration so I thanked you as well and appreciate the explanation. I will perform it now and see where I get. Let me understand this correctly in steps..
1. Download a kernel, any kernel.
2. Open it up, delete everything except the system folder.
3. Create a folder named bin and put the backed up file in the bin folder.
4. Delete everything else within the system folder except the bin file and bin folder. So it should be /system/bin/xxx.file
5. Put this on a microsd card and flash it through cwm. I assume I do this by selecting "install zip from sdcard?"
Thanks for the continual help! ^_^

I am having trouble with the kernel part. I downloaded a i727 kernel from here http://forum.xda-developers.com/showthread.php?t=1340114&page=2. Opened it up and it has boot.img in it. Am I missing something?

Alright. I downloaded the kernel from here http://www.mediafire.com/?85g701ate11zdc9. The kernel contained a folder named system and deleted everything else. I then added the folder bin and added the backed up file I deleted to the system/bin/ directory. I then mounted usb storage via CWM and put the new .zip in there. I then selected "install zip from sdcard", "choose zip from internal sd card" located the zip file and selected "yes." I then get the following read outs...
Installing update...
Installation aborted.
--Installing: /emmc/sgh-1727-skyrocket-att-original-kernel_2.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.
So it looks like it is not installing. Am I doing something wrong?

wrong kernel, download this one:
http://faux.androidro.ms/sky-kernel-010b1.zip
delete everything from in there except system folder, including boot.img, and follow instructions again, should work

JDubbed said:
icenight89 your right you provided the inspiration so I thanked you as well and appreciate the explanation. I will perform it now and see where I get. Let me understand this correctly in steps..
1. Download a kernel, any kernel.
2. Open it up, delete everything except the system folder.
3. Create a folder named bin and put the backed up file in the bin folder.
4. Delete everything else within the system folder except the bin file and bin folder. So it should be /system/bin/xxx.file
5. Put this on a microsd card and flash it through cwm. I assume I do this by selecting "install zip from sdcard?"
Thanks for the continual help! ^_^
Click to expand...
Click to collapse
these steps are exact, nice

Unfortunately I get the same error message with the kernel you supplied. x.x
010b1.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.
Are you sure I can just delete and add stuff like that and It will work? I mean it makes sense to me but since it keeps aborting there may be something crucial missing that I need to keep in the .zip file. Any ideas?
Here is a link of my modified zip. http://dl.dropbox.com/u/6778642/Android/sky-kernel-010b1.zip

pm me when u get a chance

JDubbed said:
Unfortunately I get the same error message with the kernel you supplied. x.x
010b1.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.
Are you sure I can just delete and add stuff like that and It will work? I mean it makes sense to me but since it keeps aborting there may be something crucial missing that I need to keep in the .zip file. Any ideas?
Here is a link of my modified zip. http://dl.dropbox.com/u/6778642/Android/sky-kernel-010b1.zip
Click to expand...
Click to collapse
download a rom from Dev section. Doesn't matter which one. Try silvers rom you'll like it. Mount USB storage in cwm. Copy rom to sd. Eject SD from computer. Go back to main menu in cwm. Wipe data/factory reset. Wipe cache partition. Wipe dalvik cache(under advanced in cwm) format system under mounts and storage. Back to main menu in cwm. Install zip from sdcard. Choose zip(rom) you just placed on your SD. Flash it. Reboot device. Enjoy. And make a nandroid after it boots for the first time.
Sent from my SAMSUNG-SGH-I727 using xda premium

Did you make a cwm backup of rom you were using prior to this?
Sent from my SAMSUNG-SGH-I727 using xda premium

No, I did not make a nandroid backup. I had to install CWM from download mode and then I was able to get into CWM all without booting.
I appreciate your time in writing a solution however I am not interested in wiping everything and starting from scratch which is what your proposing. I simply deleted a file in system/bin named mediaserver so system/bin/mediaserver. When I rebooted the phone would not boot. I made a backup of the mediaserver before deleting it and placed it in the sdcard/download folder. All I need to do is copy the mediaserver file back to system/bin/ directory and phone should boot backup as if nothing ever happened. That's is how I understand it. Its just missing a file and I know what the file is and I have the file I just need to figure out how to copy it back over to where it belongs.
I do know how to install stock and other roms but after spending numerous hours on my first phone, SGS Captivate, to experience others roms like Darky's Rom the end result was that it was not worth me having to keep up with all the releases and bug fixes, loading in working kernels to make things work correctly and the like. I would rather just stick with stock. Its just a personal preference.
If anyone knows how to copy a file from my pc or from internal sdcard to my Skyrocket using Download mode or ClockWorkMod using any means but without wiping my data please let me know. Eventually if I do not get a solution I will be forced to revert back to the stock rom but I would rather leave that as a last resort.
I look forward to any other suggestions!
Thank you!

Without the ability to push/pull with adb your running out of solutions. I do hope that you get your skyrocket up and running no matter what method you use. And I do hope that someone with the ability comes along to help you. My way is prob the easy way out. If it were me ide cut my losses. Start from scratch, and try to figure out where my prob starts. Good news is there is a great community with plenty of help. Good luck mate.
Sent from my SAMSUNG-SGH-I727 using xda premium

Since my zip suggestion didn't work, try flashing a different kernel, romracer stockish 0.3 is a good choice, from cwm

JDubbed said:
No, I did not make a nandroid backup. I had to install CWM from download mode and then I was able to get into CWM all without booting.
I appreciate your time in writing a solution however I am not interested in wiping everything and starting from scratch which is what your proposing. I simply deleted a file in system/bin named mediaserver so system/bin/mediaserver. When I rebooted the phone would not boot. I made a backup of the mediaserver before deleting it and placed it in the sdcard/download folder. All I need to do is copy the mediaserver file back to system/bin/ directory and phone should boot backup as if nothing ever happened. That's is how I understand it. Its just missing a file and I know what the file is and I have the file I just need to figure out how to copy it back over to where it belongs.
I do know how to install stock and other roms but after spending numerous hours on my first phone, SGS Captivate, to experience others roms like Darky's Rom the end result was that it was not worth me having to keep up with all the releases and bug fixes, loading in working kernels to make things work correctly and the like. I would rather just stick with stock. Its just a personal preference.
If anyone knows how to copy a file from my pc or from internal sdcard to my Skyrocket using Download mode or ClockWorkMod using any means but without wiping my data please let me know. Eventually if I do not get a solution I will be forced to revert back to the stock rom but I would rather leave that as a last resort.
I look forward to any other suggestions!
Thank you!
Click to expand...
Click to collapse
Based on your first post, I don't think your pc is FULLY installed your device. Download mode requires additional drivers.........adb devices should return a serial number.
I have not tried adb on my skyrocket...I will do that for your sake and reply with my experience..

[RECOVERY] Fixed CWM v3.0.2.8

I remember downloading this and saving it when I still had the SK4G. It works great, just replace the update.zip on the / of your sdcard to use. Click the THANKS button if you D/L'ed/Used/Referred To/So on...
Just because of the nature of this mod, I cannot and will not be held responsible for any mishaps to your devices and or any of its accessories (SDCards) that in this weird world of ours may just happen. This should not discourage you to use it, just saying.. You break it, You fix/replace it.
LINK: CLICK MEEEEEE
I'll still help you with your device (tech help mostly), if you need anything PM me. (probably only/fastest response)

dude your a life saver im on att and a flashaholic unfourtunatly while me and some pantech flex users are hard at work getting recovery after we successfully rooted our device about 5 days ago i havent been able to flash anything because the new cwm for the sk4g had been taken down everywhere and the koush one is so buggy and wont let me backup or flash i been looking everywhere for this

this doesnt work for me. Invalid signature. How do you install CWM when you have none after stock odin?

rpmccormick said:
this doesnt work for me. Invalid signature. How do you install CWM when you have none after stock odin?
Click to expand...
Click to collapse
I have the same problem. My sidekick is just rooted. I wanted to instal your cwm, but it writes Invalid signature. How can I install it?

dudanko said:
I have the same problem. My sidekick is just rooted. I wanted to instal your cwm, but it writes Invalid signature. How can I install it?
Click to expand...
Click to collapse
I may be wrong, but I think its due to not replacing the stock binary file with the modded binary file. I'm trying to find it online but krylon's site no longer hosts the file...

dudanko said:
I have the same problem. My sidekick is just rooted. I wanted to instal your cwm, but it writes Invalid signature. How can I install it?
Click to expand...
Click to collapse
Make sure you guys are extracting the the zip and putting the extracted recovery into the system/bin, not the whole zip.

You can also use the search and find where I reposted sduvicks fakeflash utility. It will install CWM for you.

In V2 eXDialer have force closes

shadowscott said:
I may be wrong, but I think its due to not replacing the stock binary file with the modded binary file. I'm trying to find it online but krylon's site no longer hosts the file...
Click to expand...
Click to collapse
His page on Android Spin? I used to download it from there .. don't know if its stopped working now :/
I tried sduvick's script but it wasn't working for me so I had to push the files myself.

rpmccormick said:
this doesnt work for me. Invalid signature. How do you install CWM when you have none after stock odin?
Click to expand...
Click to collapse
dudanko said:
I have the same problem. My sidekick is just rooted. I wanted to instal your cwm, but it writes Invalid signature. How can I install it?
Click to expand...
Click to collapse
replace the update.zip on the /root of the SD. No Odin required. Rename to update.zip, and place it straight on your SD.

That did not work until after I rooted it using RageAgainstTheCage
Re-upped by me here:
http://www.mediafire.com/?hn5ikyt6xpn8d9x
After doing that, then it allows the update.zip to work without failing signature check.
EDIT: Then I also used SuperOneClick to shell-root.

-__-
Ok guys the actual problem here is that there is a file missing that you need to push through to your "/system/bin" folder in your SK's root directory.
The missing file is the custom "recovery" binary file that krylon360 created. After doing so, either by ADB pushing the file or copy pasting it with a root file manager, you may boot into recovery then run the 'reinstall packages' command in the stock recovery. This in turn loads the new recovery.....
ALWAYS CHECK YOUR MOUNTS IN CUSTOM RECOVERY. It will save you an accidental pain in the ass. Trust me.
Mounts should look as follows:
----------------------------------------------------------------------------------------------------
-unmount /cache
-mount /data
-mount /sdcard (this sometimes says it is mounted-- not important)
-unmount /system (MOST IMPORTANT. IF IT DOES NOT READ AS THIS SAYS- THEN FIX THAT AND MOUNT IT BEFORE ANY BACKUPS OR WIPES. YOU WILL GET STUCK IN THE SCRIPT)
----------------------------------------------------------------------------------------------------
I will see if I can host the file in my Dropbox. As for the help, it is available in many older posts already. But a hitting that thanks button couldn't hurt ;D

Zydrate_blue said:
Ok guys the actual problem here is that there is a file missing that you need to push through to your "/system/bin" folder in your SK's root directory.
The missing file is the custom "recovery" binary file that krylon360 created. After doing so, either by ADB pushing the file or copy pasting it with a root file manager, you may boot into recovery then run the 'reinstall packages' command in the stock recovery. This in turn loads the new recovery.....
ALWAYS CHECK YOUR MOUNTS IN CUSTOM RECOVERY. It will save you an accidental pain in the ass. Trust me.
Mounts should look as follows:
----------------------------------------------------------------------------------------------------
-unmount /cache
-mount /data
-mount /sdcard (this sometimes says it is mounted-- not important)
-unmount /system (MOST IMPORTANT. IF IT DOES NOT READ AS THIS SAYS- THEN FIX THAT AND MOUNT IT BEFORE ANY BACKUPS OR WIPES. YOU WILL GET STUCK IN THE SCRIPT)
----------------------------------------------------------------------------------------------------
I will see if I can host the file in my Dropbox. As for the help, it is available in many older posts already. But a hitting that thanks button couldn't hurt ;D
Click to expand...
Click to collapse
IIRC, I believe this is the file that everyone wants..
http://www.4shared.com/file/BqnNCX3K/recovery.html

Thank you
I would like to say thanks to you all helping out with this. My lack of signing in here has to do with me not even having an Android-powered device anymore. I sold my SideKick and MyTouch together for about $250. I still come back here and look around every now and then, but see that a lot of you guys have it under control. So, once again thank you.:good:

Stock Recovery Menu TF700T

I managed to get to the stock recovery back from cwm.....thanx to @eoh7678
But now I want to get access to the recovery "menu". I get into the recovery and end up at the android logo with a " ! "
I tried some key combinations but didn't help.
Please help me, thanks

The stock recovery does not have a menu. The only thing it can do is flash a stock firmware file loaded to the root of your internal storage (or external after renaming it). So what you are seeing is perfectly normal.
What are you trying to accomplish and how?

berndblb said:
The stock recovery does not have a menu. The only thing it can do is flash a stock firmware file loaded to the root of your internal storage (or external after renaming it). So what you are seeing is perfectly normal.
What are you trying to accomplish and how?
Click to expand...
Click to collapse
Actually I want to update it from stock 4.2.1 to 4.2.2. I have downloaded the update file from asus website but I don't know how to update it now. Can you please explain me properly? I have copied the update file in /cache. I made a file named command in /cache/recovery
and in that file I inserted "--update_package=/cache/<the update filename> .zip " and saved the file and then booted into recovery.
Nothing happened, the device did not update.
And then I again booted into the OS and found that the "command" file no longer existed! I have tried this 3 times.

-Ngu said:
Actually I want to update it from stock 4.2.1 to 4.2.2. I have downloaded the update file from asus website but I don't know how to update it now. Can you please explain me properly? I have copied the update file in /cache. I made a file named command in /cache/recovery
and in that file I inserted "--update_package=/cache/<the update filename> .zip " and saved the file and then booted into recovery.
Nothing happened, the device did not update.
And then I again booted into the OS and found that the "command" file no longer existed! I have tried this 3 times.
Click to expand...
Click to collapse
The file you downloaded is called something like bla_bla_UPDATELAUNCHER.zip.
Extraxt that zip once and you end up with another zip: bla_bla_user.zip
Take the user.zip and put it into the root level of internal storage. NOT into any folder, just alongside your Downloads, Pictures folders etc., so into /sdcard/
The system should automatically recognize the file and give you a notification. If it doesn't, reboot.
If still nothing happens you either have an incorrect file or read this:
http://www.transformerforums.com/fo...irmware-tf700-tf300-tf101-possibly-tf201.html