Welcome to Project Rookie:
This is the unofficial guide to ROM, Kernel and AROMA installer building. This guide is primarily geared toward building for the AT&T Samsung Galaxy Skyrocket, but as a general guide it will work for all devices (you just need to know where to plug in your device specific repos and commands). The intended audience is for individuals with basic knowledge of linux, a degree of knowledge in basic troubleshooting and a general curiosity for how this stuff works.
This thread is extraordinarily long and is jam packed full of useful information. Please SEARCH the thread before asking questions related to building. If you cannot find your answer, or need additional clarification then don't hesitate to ask. Everyone participating here is knowledgeable and helpful to new builders, so don't abuse it – any flaming will immediately be reported to the moderation team.
In the very least, read through the first posts of this thread in detail, at least twice, before you start building and running commands to get setup.
On one hand, it should go without saying that if you have no knowledge and/or experience with building, java, C++, and various other tools, you probably shouldn't begin here. At the same time, it is possible to learn to build, provided you can read, follow directions, and aren't too lazy to RESEARCH.
OH YEAH, and you better have patience. This isn't easy. It will be work. The quickest way to get flamed is to show yourself to be lazy. If you think that with a couple clicks, you can have your own flashy ROM, forget it. But, if you do want to learn, this is a good place to get started. Nobody here has an ego about this, and we all want to help. But, we all struggled to get to a successful point, and lazy, unmotivated people just irritate those who have had to learn from scratch too. This is an ever-changing thread; team members are working on or currently building all types of ROMs, kernels and other MODs like AROMA installer. Tutorials will be posted for any new thing learned and built as time and space allow. ALL ARE WELCOME AND ALL QUESTIONS ARE TOO. But, seriously, if it's a really ridiculous one, we reserve the right to screw with you about it.
Thread Disclaimer:
The releases, instructions, and extras posted here are to be used at your own risk. We work hard to provide good, workable knowledge and builds, and test our work before posting it up front. Nevertheless, no one is responsible if you lose your files, brick your device, or inadvertently cause a nuclear war. If you are seeking absolute perfection, RUN NOW WHILE YOU STILL CAN!!
Thread Table of Contents:
Post 1:
- Linux system configuration (Ubuntu 12.04 & 13.04)
- ROM building instructions for CM10.2, AOKP, PACMAN
Post 2:
- Instructions for kernel building, along with other additions, mods, and helpful tutorials
Post 3:
- Misc topics
- Team Rookie ROM & Kernel Distributions
- Links to related topics and specific posts of interest
The tutorial for building your own AROMA installer can be found here: http://forum.xda-developers.com/showpost.php?p=34886089&postcount=2708
GETTING STARTED
Setting up your environment :
This is a combination of the steps offered in the threads 'Compile JB on Ubuntu' and TeamChopsticks CyanogenMod for Hercules and Skyrocket.
Special thanks to dastin1015 and TeamChopsticks.
Tip: Allocate at least 75 gigs of space for the building of ONE ROM. If you install ccache, you will want 90. A complete build directory can use as much as 100 gigs, so make sure you have plenty of room. One of the ways to fail out a build is too use all of your partition before acquiring all the necessary files.
For OSX Mavericks users, check out this thread for getting setup: http://forum.xda-developers.com/showthread.php?t=2510898
Here are the steps from those 2 tutorials in correct order:
1) You need the following:
-JDK 6 if you wish to build Jellybean.
Code:
[COLOR="Black"]$ sudo apt-get install openjdk-6-jdk[/COLOR]
-Python 2.4 -- 2.7, which you can download from python.org. Or:
Code:
[COLOR="black"]$ sudo apt-get install python[/COLOR]
-Git 1.7 or newer. You can find it at git-scm.com. Or:
Code:
[COLOR="black"]$ sudo apt-get install git-core[/COLOR]
-Android SDK:
Download the SDK here: http://developer.android.com/sdk/index.html
Extract the SDK and place it in your home directory.
I renamed my SDK to android-sdk to make it easier to navigate to – this tutorial assumes you've done that as well.
Go to your home folder, press Ctrl+H to show hidden files, and open up your .bashrc file.
Add these lines at the bottom of the file:
Code:
[COLOR="black"]# Android tools
export PATH=${PATH}:~/android-sdk/tools
export PATH=${PATH}:~/android-sdk/platform-tools
export PATH=${PATH}:~/bin[/COLOR]
Find your .profile file and add this at the bottom of the file:
Code:
[COLOR="black"]PATH="$HOME/android-sdk/tools:$HOME/android-sdk/platform-tools:$PATH"[/COLOR]
You have now successfully installed the Android SDK.
To check for updates issue this into your terminal:
Code:
[COLOR="black"]$ android[/COLOR]
2) Install required packages. 64-bit (recommended)
Code:
[COLOR="black"]$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl zlib1g-dev libc6-dev lib32ncurses5-dev ia32-libs \
x11proto-core-dev libx11-dev lib32readline-gplv2-dev lib32z-dev \
libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown \
libxml2-utils lzop schedtool[/COLOR]
On newer versions of Ubuntu such as 11.10 you may need to do the following:
Code:
[COLOR="black"]$ sudo ln -s /usr/lib/i386-linux-gnu/libX11.so.6 /usr/lib/i386-linux-gnu/libX11.so[/COLOR]
Code:
[COLOR="black"]$ sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev \
libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 \
libgl1-mesa-dev g++-multilib mingw32 openjdk-6-jdk tofrodos \
python-markdown libxml2-utils xsltproc zlib1g-dev:i386
$ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so[/COLOR]
3) Configure your USB.
Code:
[COLOR="black"]$ gksudo gedit /etc/udev/rules.d/51-android.rules[/COLOR]
Inside of this blank text file insert:
Code:
[COLOR="black"]#Acer
SUBSYSTEM=="usb", ATTR{idVendor}=="0502", MODE="0666"
#ASUS
SUBSYSTEM=="usb", ATTR{idVendor}=="0b05", MODE="0666"
#Dell
SUBSYSTEM=="usb", ATTR{idVendor}=="413c", MODE="0666"
#Foxconn
SUBSYSTEM=="usb", ATTR{idVendor}=="0489", MODE="0666"
#Garmin-Asus
SUBSYSTEM=="usb", ATTR{idVendor}=="091E", MODE="0666"
#Google
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", MODE="0666"
#HTC
SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", MODE="0666"
#Huawei
SUBSYSTEM=="usb", ATTR{idVendor}=="12d1", MODE="0666"
#K-Touch
SUBSYSTEM=="usb", ATTR{idVendor}=="24e3", MODE="0666"
#KT Tech
SUBSYSTEM=="usb", ATTR{idVendor}=="2116", MODE="0666"
#Kyocera
SUBSYSTEM=="usb", ATTR{idVendor}=="0482", MODE="0666"
#Lenevo
SUBSYSTEM=="usb", ATTR{idVendor}=="17EF", MODE="0666"
#LG
SUBSYSTEM=="usb", ATTR{idVendor}=="1004", MODE="0666"
#Motorola
SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", MODE="0666"
#NEC
SUBSYSTEM=="usb", ATTR{idVendor}=="0409", MODE="0666"
#Nook
SUBSYSTEM=="usb", ATTR{idVendor}=="2080", MODE="0666"
#Nvidia
SUBSYSTEM=="usb", ATTR{idVendor}=="0955", MODE="0666"
#OTGV
SUBSYSTEM=="usb", ATTR{idVendor}=="2257", MODE="0666"
#Pantech
SUBSYSTEM=="usb", ATTR{idVendor}=="10A9", MODE="0666"
#Philips
SUBSYSTEM=="usb", ATTR{idVendor}=="0471", MODE="0666"
#PMC-Sierra
SUBSYSTEM=="usb", ATTR{idVendor}=="04da", MODE="0666"
#Qualcomm
SUBSYSTEM=="usb", ATTR{idVendor}=="05c6", MODE="0666"
#SK Telesys
SUBSYSTEM=="usb", ATTR{idVendor}=="1f53", MODE="0666"
#Samsung
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666"
#Sharp
SUBSYSTEM=="usb", ATTR{idVendor}=="04dd", MODE="0666"
#Sony Ericsson
SUBSYSTEM=="usb", ATTR{idVendor}=="0fce", MODE="0666"
#Toshiba
SUBSYSTEM=="usb", ATTR{idVendor}=="0930", MODE="0666"
#ZTE
SUBSYSTEM=="usb", ATTR{idVendor}=="19D2", MODE="0666"[/COLOR]
4) Save the file and close it and then issue this command:
Code:
[COLOR="black"]$ sudo chmod a+r /etc/udev/rules.d/51-android.rules[/COLOR]
5) Install the repo:
Code:
[COLOR="black"]$ mkdir ~/bin
$ PATH=~/bin:$PATH
$ curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
$ chmod a+x ~/bin/repo[/COLOR]
Create your work directory:
Code:
[COLOR="black"]mkdir ~/"your directory name here" For example: mkdir ~/cm10
cd ~/cm10[/COLOR]
This is what you need to begin building. From here, the various types of ROM styles can be built with a few additions and commands.
UNOFFICIAL CM10.2 :
Initialize the work directory:
Code:
[COLOR="Black"]repo init -u git://github.com/CyanogenMod/android.git -b cm-10.2[/COLOR]
Create and edit roomservice.xml in .repo: gedit /.repo/local_manifests/roomservice.xml
Code:
[COLOR="Black"]<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="CyanogenMod/android_device_samsung_skyrocket" path="device/samsung/skyrocket" remote="github" revision="cm-10.2" />
<project name="CyanogenMod/android_device_samsung_hercules" path="device/samsung/hercules" remote="github" revision="cm-10.2" />
<project name="CyanogenMod/android_device_samsung_msm8660-common" path="device/samsung/msm8660-common" remote="github" revision="cm-10.2" />
<project name="CyanogenMod/android_kernel_samsung_msm8660-common" path="kernel/samsung/msm8660-common" remote="github" revision="cm-10.2" />
<project name="TheMuppets/proprietary_vendor_samsung" path="vendor/samsung" remote="github" revision="cm-10.2" />
<project name="CyanogenMod/android_device_samsung_celox-common" path="device/samsung/celox-common" remote="github" revision="cm-10.2" />
<project name="CyanogenMod/android_device_samsung_qcom-common" path="device/samsung/qcom-common" remote="github" revision="cm-10.2" />
</manifest>[/COLOR]
Code:
[COLOR="black"]repo sync -j16 (this may take a few hours as it downloads ~17GB of source)[/COLOR]
To Build:
Code:
[COLOR="black"]. build/envsetup.sh (notice the period and space)
vendor/cm/get-prebuilts
repo sync -j16
[/color]
For Skyrocket:
Code:
$ CM_EXTRAVERSION=mycustombuild CM_SNAPSHOT=1 brunch cm_skyrocket-userdebug
or
$ breakfast cm_skyrocket-userdebug
$ brunch cm_skyrocket-userdebug
For Hercules:
Code:
CM_EXTRAVERSION=mycustombuild CM_SNAPSHOT=1 brunch cm_hercules-userdebug
**After you build, your repo files will remain in place. This will cause your future builds to be based from that specific time of additions and merges. Wiping or 'cleaning' your files often will ensure that your builds are the most up-to-date. To be sure that you start with a fresh repo at the beginning of every build, you should 'make clean' often. For example:
Code:
[COLOR="Black"]$ cd ~/cm10
$ make clean (or 'make clobber' without quotes)[/COLOR]
If you want to have your 'cleaning service' done as part of your process, this is a way to achieve it:
Code:
[COLOR="black"]$ cd cm10
$ repo sync -j16
$ . build/envsetup.sh && make clobber && CM_EXTRAVERSION= mycustombuild CM_SNAPSHOT=1 brunch cm_skyrocket-userdebug[/COLOR]
This will make the cleaning process automatic.
The Git can be found here:
https://github.com/CyanogenMod
UNOFFICIAL CM11.0 :
The steps are essentially the same as CM10.2 ... just have to make a couple changes to your git init and your roomservice.xml as follows:
Code:
[COLOR="Black"]repo init -u git://github.com/CyanogenMod/android.git -b cm-11.0[/COLOR]
Create and edit roomservice.xml in .repo: gedit /.repo/local_manifests/roomservice.xml
Code:
[COLOR="Black"]<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="CyanogenMod/android_device_samsung_skyrocket" path="device/samsung/skyrocket" remote="github" />
<project name="CyanogenMod/android_device_samsung_hercules" path="device/samsung/hercules" remote="github" />
<project name="CyanogenMod/android_device_samsung_msm8660-common" path="device/samsung/msm8660-common" remote="github" />
<project name="CyanogenMod/android_kernel_samsung_msm8660-common" path="kernel/samsung/msm8660-common" remote="github" />
<project name="TheMuppets/proprietary_vendor_samsung" path="vendor/samsung" remote="github" />
<project name="CyanogenMod/android_device_samsung_celox-common" path="device/samsung/celox-common" remote="github" />
<project name="CyanogenMod/android_device_samsung_qcom-common" path="device/samsung/qcom-common" remote="github" />
</manifest>[/COLOR]
The remaining steps to build are the same ... breakfast, lunch, brunch etc.
UNOFFICIAL AOKP :
This is a set of steps to set up and run an AOKP build. Special thanks to m4570d0n for taking the time to share his detailed instructions, and R41NS for his assistance in providing some simplifications. Buy those guys a beer if you see them!
It's actually pretty close to CM. It's just several tiny changes. I made some changes that are not necessary but did so to conserve space. With CM's manifest setup, you don't have to worry about downloading a bunch of stuff you don't need but with AOKP, by default you're downloading all the kernels and /device/whatever for pretty much all devices and I didn't want to do that so here's what I did.
1)
Code:
[COLOR="Black"]repo init -u https://github.com/AOKP/platform_manifest.git -b jb-mr1[/COLOR]
2) Create local_manifest.xml in .repo with the following in it:
Code:
[COLOR="black"]
[/COLOR]
3) Next, do a repo sync.
4) Edit vendorsetup.sh to have the following in it :
Code:
[COLOR="Black"]add_lunch_combo aokp_skyrocket-userdebug[/COLOR]
Also, open device.mk and change it to this :
Code:
[COLOR="black"]$(call inherit-product, $(SRC_TARGET_DIR)/product/languages_full.mk)
## The gps config appropriate for this device
PRODUCT_COPY_FILES += device/common/gps/gps.conf_US_SUPL:system/etc/gps.conf
## (2) Also get non-open-source specific aspects if available
$(call inherit-product-if-exists, vendor/samsung/skyrocket/skyrocket-vendor.mk)
## misc
PRODUCT_PROPERTY_OVERRIDES += \
dalvik.vm.dexopt-flags=m=v,o=y
## overlays
DEVICE_PACKAGE_OVERLAYS += device/samsung/hercules/overlay
# Device uses high-density artwork where available
PRODUCT_AAPT_CONFIG := normal hdpi
PRODUCT_AAPT_PREF_CONFIG := hdpi
# Hardware
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml
# Ramdisk
PRODUCT_COPY_FILES += \
device/samsung/skyrocket/ramdisk/init.qcom.rc:root/init.qcom.rc \
device/samsung/skyrocket/ramdisk/init.qcom.sh:root/init.qcom.sh \
device/samsung/skyrocket/ramdisk/init.qcom.usb.rc:root/init.qcom.usb.rc \
device/samsung/skyrocket/ramdisk/init.qcom.usb.sh:root/init.qcom.usb.sh \
device/samsung/skyrocket/ramdisk/init.target.rc:root/init.target.rc \
device/samsung/skyrocket/ramdisk/ueventd.rc:root/ueventd.rc \
device/samsung/skyrocket/ramdisk/init.emmc.rc:root/init.emmc.rc \
device/samsung/skyrocket/fstab.qcom:root/fstab.qcom
# BT firmware
PRODUCT_COPY_FILES += \
device/samsung/skyrocket/firmware/bcm4330B1.hcd:system/etc/firmware/bcm4330B1.hcd
# Vold
PRODUCT_COPY_FILES += \
device/samsung/skyrocket/vold.fstab:system/etc/vold.fstab
# QRNGD
PRODUCT_PACKAGES += qrngd
# common msm8660
$(call inherit-product, device/samsung/msm8660-common/msm8660.mk)
$(call inherit-product, frameworks/native/build/phone-xhdpi-1024-dalvik-heap.mk)
$(call inherit-product-if-exists, vendor/samsung/skyrocket/skyrocket-vendor.mk)
#WIFI_BAND := 802_11_ABG
#$(call inherit-product-if-exists, hardware/broadcom/wlan/bcmdhd/firmware/bcm4330/device-bcm.mk)
# NFC
BOARD_HAVE_NFC := true[/COLOR]
**With the exception of making the change to use the Hercules overlay, the other edits to device.mk are optional, and will cause different results with the different options you use.
5)Go to vendor/AOKP/products and create a skyrocket.mk file that is essentially copied from the hercules.mk. :
Code:
[COLOR="black"]# Inherit AOSP device configuration for skyrocket.
$(call inherit-product, device/samsung/skyrocket/full_skyrocket.mk)
# Inherit common product files.
$(call inherit-product, vendor/aokp/configs/common_phone.mk)
# Inherit GSM common stuff
$(call inherit-product, vendor/aokp/configs/gsm.mk)
# skyrocket overlay
PRODUCT_PACKAGE_OVERLAYS += vendor/aokp/overlay/hercules
# Setup device specific product configuration.
PRODUCT_NAME := aokp_skyrocket
PRODUCT_BRAND := Samsung
PRODUCT_DEVICE := skyrocket
PRODUCT_MODEL := SGH-I727
PRODUCT_MANUFACTURER := Samsung
PRODUCT_BUILD_PROP_OVERRIDES += PRODUCT_NAME=SGH-I727 TARGET_DEVICE=SGH-I727 BUILD_FINGERPRINT="samsung/SGH-I727/SGH-I727:4.1.1/IMM76D/UCLF6:user/release-keys" PRIVATE_BUILD_DESC="SGH-I727-user 4.1.1 IMM76D UCLF6 release-keys"
# boot animation
PRODUCT_COPY_FILES += \
vendor/aokp/prebuilt/bootanimation/bootanimation_480_800.zip:system/media/bootanimation.zip[/COLOR]
Then go to vendor/AOKP and
6) Add the skyrocket.mk file in Step 5 to vendor/AOKP/products/AndroidProducts.mk :
Code:
[COLOR="black"]PRODUCT_MAKEFILES := \
$(LOCAL_DIR)/captivatemtd.mk \
$(LOCAL_DIR)/crespo.mk \
$(LOCAL_DIR)/crespo4g.mk \
$(LOCAL_DIR)/d2tmo.mk \
$(LOCAL_DIR)/d2usc.mk \
$(LOCAL_DIR)/d2vzw.mk \
$(LOCAL_DIR)/evita.mk \
$(LOCAL_DIR)/galaxysmtd.mk \
$(LOCAL_DIR)/fascinatemtd.mk \
$(LOCAL_DIR)/galaxysmtd.mk \
$(LOCAL_DIR)/grouper.mk \
$(LOCAL_DIR)//skyrocket.mk \
$(LOCAL_DIR)/hercules.mk \
$(LOCAL_DIR)/i9300.mk \
$(LOCAL_DIR)/i9100.mk \
$(LOCAL_DIR)/i9100g.mk \
$(LOCAL_DIR)/maguro.mk \
$(LOCAL_DIR)/n7000.mk \
$(LOCAL_DIR)/p3100.mk \
$(LOCAL_DIR)/p3110.mk \
$(LOCAL_DIR)/p3113.mk \
$(LOCAL_DIR)/p5100.mk \
$(LOCAL_DIR)/p5110.mk \
$(LOCAL_DIR)/p5113.mk \
$(LOCAL_DIR)/tf101.mk \
$(LOCAL_DIR)/toro.mk \
$(LOCAL_DIR)/toroplus.mk \
$(LOCAL_DIR)/vibrantmtd.mk[/COLOR]
7) In vendor/AOKP open vendorsetup.sh and add this :
Code:
[COLOR="black"]add_lunch_combo aokp_skyrocket-userdebug[/COLOR]
8) Go to https://github.com/TeamChopsticks/proprietary_vendor_samsung/downloads and select "Download as zip." After the download completes, open the archive and extract the "skyrocket" folder to /vendor/samsung.
or
8) cd to your home directory. Download the proprietary_vendor_samsung repo from Team Chopsticks and then copy the skyrocket directory to /vendor/samsung:
Code:
[COLOR="Black"]cd
git clone -b jellybean https://github.com/TeamChopsticks/proprietary_vendor_samsung.git
cp -r proprietary_vendor_samsung/skyrocket aokp/vendor/samsung[/COLOR]
9) Start building :
Code:
[COLOR="Black"]. build/envsetup.sh
lunch aokp_skyrocket-userdebug && mka bacon[/COLOR]
SLIMBEAN :
By popular demand, here is a set of steps for building Slimbean - Many thanks to onlychevys for taking the time to lay this out
To build Slim Bean, you do the same as cm10 only with their platform_manifest:
https://github.com/SlimRoms/platform_manifest
(The manifest code is too long to place here, sorry)
If you have the space on your hard drive, then you can copy the .repo file from cm10 or aokp etc (.repo is a hidden file,cntrl + h to see it) to another directory and delete the local_manifest in there.
Then:
Code:
[COLOR="Black"]repo init -u git://github.com/SlimRoms/platform_manifest.git -b jb4.2[/COLOR]
Copy this code to terminal while in that directory to initialize their repo.
Next:
Code:
[COLOR="black"]repo sync -j16[/COLOR]
**Copying the .repo saves about 3 plus hours of downloading aosp source.
Then you should be ready to build.
Start building :
Code:
[COLOR="Black"]. build/envsetup.sh
lunch slimbean_skyrocket-userdebug && mka bacon[/COLOR]
PAC-man :
This is a newer but very functional and well-liked compilation of three builds: Paranoid Android, CM, and AOKP. Here is a brief set of steps from the PAC git:
To get started with PAC-man, you'll need to get familiar with Git and Repo.
To initialize your local repository using the PAC-man trees, use a command like this:
Code:
[COLOR="Black"]repo init -u git://github.com/PAC-man/android.git -b cm-10.1[/COLOR]
Then to sync up:
Code:
[COLOR="black"]repo sync[/COLOR]
After the syncing process completes, you can run your build commands:
Code:
[COLOR="black"]. build/envsetup.sh[/COLOR]
Code:
[COLOR="black"]vendor/cm/get-prebuilts[/COLOR]
Code:
[COLOR="black"]repo sync -j16[/COLOR]
And finally:
Code:
[COLOR="black"]./build-pac.sh skyrocket -j16[/COLOR]
The Git can be found here:
https://github.com/PAC-man
Some github information from @m4570d0n who has some serious git-fu skills.
m4570d0n said:
You don't have to cd into a project directory to do a repo sync for that project. You can just run repo sync path/to/project. from the root of your build tree.
While I'm here, someone asked me about some git stuff recently, and I figured the info might be useful here as well....
Start with the tutorials on github.
Create A Repo
Fork A Repo
Using Pull Requests
Github Glossary
Also, don't underestimate the usefulness of --help. It's nearly a universal rule that adding "--help" to any command will bring up a help menu for that command. For git, it's particularly helpful for me, and literally every git command has it's own help file, and usually has example commands as well. For example, each of these will bring up a different help file:
Code:
git branch --help
git pull --help
git log --help
git remote --help
git show --help
etc., etc.
You can also just browse the whole manual, which is where those help files come from.:
http://git-scm.com/docs
I've also had a few specific things I was trying to figure out how to do on git and in the process found some nice sites/articles that were very helpful:
Visual Git Cheat Sheet
git howto: revert a commit already pushed to a remote repository - Christoph Rüegg
On undoing, fixing, or removing commits in git
More reference info with examples:
http://gitref.org/branching/
http://gitref.org/remotes/
a few miscellaneous command I picked up that I found useful.
commit a change created by someone else, and manually retaining the original author of the commit:
Code:
git commit --author="John Doe <[email protected]>"
commit a change created by someone else, and manually retaining the original author and the original commit date:
Code:
git commit --author="John Doe <[email protected]>" --date="Thu Oct 03 20:19:03 2013 +0000"
Push a change to CM's gerrit or PAC-man's gerrit:
Code:
git push ssh://[email protected]:29418/android_packages_apps_Setting HEAD:refs/for/cm-10.2
Code:
git push ssh://[email protected]:29418/android_packages_apps_Settings HEAD:refs/for/cm-10.2
Find the git index blob associated with a particular file:
Code:
[COLOR=SeaGreen][email protected][/COLOR]:[COLOR=RoyalBlue]~/PAC[/COLOR]$ cd frameworks/base
[COLOR=SeaGreen][email protected][/COLOR]:[COLOR=RoyalBlue]~/PAC/frameworks/base[/COLOR]$ git hash-object core/res/assets/images/android-logo-mask.png
498ad8885e2a1e55a499c404effa457de2cb6461
Also there's a couple extra git packages in the official Ubuntu repos that can be pretty handy. One is called git-stuff. I'm pretty sure the guy that created that is one of the dudes in CM (author is Daniel Baumann and I see commits on CM's gerrit almost daily from a guy named Danny Baumann).
Two others:
git-extras
git-gui
git gui is kinda cool and noob friendly. In order to use it, just cd into a folder that has a git repo in it and type:
Code:
git gui
Another useful git command is git stash.
Let's say you made some local changes to /packages/apps/Mms. If you wanted to cherry-pick a commit that involved any files you changed locally, the cherry-pick would fail because there are uncommitted changes. You could commit them, but then they would be undone on your next repo sync. With git stash, it will save your uncommitted changes. Then you can apply the cherry picks, and then apply your changes again on top of them by running:
Code:
git stash apply
Note: that will work if you only have one stash or if your most recent stash is the one you want to apply, otherwise you will have to add the name of the stash as well. For reference on git stash command options like listing the stashes, diffs, etc. see this:
https://www.kernel.org/pub/software/scm/git/docs/git-stash.html
Click to expand...
Click to collapse
KERNEL BUILDING and other EXTRAS
Building your first kernel :
This is a set of steps to get you building your first kernel. Special thanks to thewadegeek for putting this tutorial together. His thread can be found here: http://forum.xda-developers.com/showthread.php?t=1748297
Step 1. Build Environment
A. Install Ubuntu 12.04(Not holding your hand here, if you can't do this you shouldn't be messing with kernels)
B. Required packages: git-core, gnupg, flex, bison, gperf, libsdl-dev, libesd0-dev, libwxgtk2.6-dev, build-essential, zip, curl, libncurses5-dev, zlib1g-dev, ia32-libs, lib32z1-dev, lib32ncurses5-dev, gcc-multilib, g++-multilib, and Adb.
C. Open a terminal
D. Type
Code:
[COLOR="black"]mkdir android[/COLOR]
E. Type
Code:
[COLOR="black"]cd android[/COLOR]
G.Type
Code:
[COLOR="black"]mkdir kernel[/COLOR]
Step 2. Your Source
A. Open your Terminal Prompt
B. Type
Code:
[COLOR="black"]cd android/kernel[/COLOR]
C. Type
Code:
[COLOR="black"]git clone git://github.com/DooMLoRD/android_prebuilt_toolchains.git toolchains[/COLOR]
D. Now comes the tricky part, you need to have some-type of source for your kernel. Check the following two sites for your device as appropriate. Once you have it download it is extracted/cloned into a folder in your kernel directory.
http://www.htcdev.com/
http://opensource.samsung.com/
.http://developer.sonymobile.com/wpor...ads/opensource
http://www.lg.com/global/support/ope...opensource.jsp
Step 3. Modifications
This is the part people are curious about, they want to make modifications to the kernel to make it "special". Start all these from the root directory of your kernel source.
Mod 1. Applying a patch
A. Download the patch you wish to apply, in this case this one should work.
B. Save that file as "kernelPatch" in your kernel directory.
C. Open a Terminal
D. Move into the root directory of the kernel you wish to patch.
E. Type
Code:
[COLOR="black"]patch -p1 < ../kernelPatch[/COLOR]
Mod 2. Adding a Governor Alone
A. Open "drivers/cpufreq/Kconfig"
B. Add the following lines in appropriate spot amongst the other govenor's
Code:
[COLOR="Black"]config CPU_FREQ_DEFAULT_GOV_SMARTASS
bool "smartass"
select CPU_FREQ_GOV_SMARTASS
select CPU_FREQ_GOV_PERFORMANCE
help
Use the CPUFreq governor 'smartass' as default.
[/COLOR]
Code:
[COLOR="Black"]config CPU_FREQ_GOV_SMARTASS
tristate "'smartass' cpufreq governor"
depends on CPU_FREQ
help
smartass' - a "smart" optimized governor!
If in doubt, say N.[/COLOR]
C. Open "drivers/cpufreq/Makefile"
D. Add the following line in the appropriate spot.
Code:
[COLOR="Black"] obj-$(CONFIG_CPU_FREQ_GOV_SMARTASS) += cpufreq_smartass.o[/COLOR]
E. Create a file called "drivers/cpufreq/cpufreq_smartass.c"
F. Put the following code in that file.
http://pastebin.com/f0Bk9kVZ
G. open "include/linux/cpufreq.h"
H. Under the "Cpufreq Default" section add
Code:
[COLOR="Black"]#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_SMARTASS)
extern struct cpufreq_governor cpufreq_gov_smartass;
#define CPUFREQ_DEFAULT_GOVERNOR (&cpufreq_gov_smartass)[/COLOR]
Ok there is a governor added, do the exact same steps for any other one's you would like to add.
Step 4. Getting a Config file
Option A. Pulling a config file from a kernel.
A. Hook up a device that is using a kernel similar to one you are using as your base.
B. Open a terminal
C. Change to your root kernel directory
D. Type
Code:
[COLOR="black"]adb pull /proc/config.gz[/COLOR]
E. Type
Code:
[COLOR="black"]gunzip config.gz[/COLOR]
F. Type
Code:
[COLOR="black"]mv config arch/arm/configs/<your_config_name>_defconfig[/COLOR]
Option B. Using the manufacturers config.
Unfortunately as stated above, not all kernels support the "/proc/config.gz" method. You can typically find a manufacturer's configuration file in "arch/arm/configs". I believe the one for my HTC Flyer was called "flyer_hc_defconfig", so look for a layout similar to that one. Also read the README to get a better idea of how to modify it. I would personally make a copy of it called "<your_config_name>_defconfig" and use that as my base.
Step 5. Building
Time to start the real "build" section of this tutorial.
Part A. Pre-build Steps
A. Open terminal and change to the root of your kernel directory
B. Type
Code:
[COLOR="black"]export ARCH=arm[/COLOR]
C. Type
Code:
[COLOR="black"]export CROSS_COMPILE=~/android/kernel/toolchains/arm-eabi-linaro-4.6.2/bin/arm-eabi-[/COLOR]
Part B. The First Build
A. Type
Code:
[COLOR="black"]make <your_config_name>_defconfig[/COLOR]
B. Type
Code:
[COLOR="black"]make menuconfig[/COLOR]
and make the required changes to use any modules you added or similar changes.
C. Type
Code:
[COLOR="black"]make -j<maximum number of jobs>[/COLOR]
Part C. Re-Builds
A. Type
Code:
[COLOR="black"]make clean[/COLOR]
B. Type
Code:
[COLOR="black"]make oldconfig[/COLOR]
C. Type
Code:
[COLOR="black"]make -j<maximum number of jobs>[/COLOR]
Part D. Building Modules
You have two options:
A. Type
Code:
[COLOR="black"]make modules[/COLOR]
B. Type
Code:
[COLOR="black"]make path/to/your/module.ko[/COLOR]
The above steps explained:
Part A.(These steps are required every time you close your terminal and re-open it to build again.)
A. Ok shouldn’t need to explain this.
B. This command sets your target architecture.
C. Defines the path to the toolchain we are going to use to compile our kernel. You can change this to point towards whatever toolchain you have downloaded or feel like using, the way it is currently configured it will use the Linaro toolchain that we downloaded above.
Part B.(These only need to be run the first time you build a kernel.)
A. Load's your configuration file from earlier.
B. Open up a menu to configure your kernel. It will use the config file you loaded in the previous step as a base.
C. Viola start the build. I typically allow 1 job per core, so on my quad core machine I put "make -j4". Just raising that number will not make your build faster, your processor needs to be able to support the number of jobs you are assigning it.
Part C. (Use the command's when you are building any-time outside of the first)
A. This command gets rid of any old/outdated binaries or modules you compiled before, and let's start fresh. I like to run it every I build unless my changes are really small and localized.
B. A very awesome command, it parses through what has changed and only prompts you about new options.
C. See the explanation for the above "Part C.".
Part D.(Use these for just building kernel modules.)
A. This will re-build all modules.
B. Will rebuild just the module you need. Very useful when you need to rebuild a WiFi module.
Step 6. Now what
Ok we have now started our build and we are waiting for it to finish, so there are two possible outcomes:
Outcome A. Build Succeeds
W00t!! You have a kernel built by your self from source. There are a couple things you need in-order to use this kernel on your device any ".ko" modules and the zImage binary. If you pay attention to the output of your compiler then you will see the location of those objects. However the following commands will make your life a bit easier(Thanks Recognized Developer Hacre):
A. Open a terminal
B. Change to your root kernel directory
C. Type
Code:
[COLOR="black"]mkdir ../<your_kernel>_output[/COLOR]
D. Type
Code:
[COLOR="black"]cp arch/arm/boot/zImage ../<your_kernel>_output/zImage[/COLOR]
E. Type
Code:
[COLOR="black"]find . -name "*.ko" -exec cp {} ../<your_kernel>_output \;[/COLOR]
The above steps explained:
A-C. Self-Explanatory
D. Move our kernel binary into our output folder
E. This handy bit of magic finds all ".ko" modules and also copies them into your output file.
You will also need to assemble a kernel image containing a initramfs for your device, along with the kernel binary and such. That however is beyond the scope of this tutorial. To get started though try searching the following phrases.
Code:
[COLOR="Black"]building android kernel image
xda build kernel image
xda unpack boot.img[/COLOR]
Outcome B. Build Fails
Oh dear. It failed. Well guess what...this is going to happen..a LOT. Get used to it, and get used to googling and experimenting with different solutions. The following are some tips that will help you with debugging your issues.
Running a "Clean" build
A. Backup your config file - Type
Code:
[COLOR="black"]cp .config ../backupConfig[/COLOR]
B. Re-run the build process using just your defconfig from earlier.
Limiting Output(Thanks Hacre.)
A. Another good tip is to run "make -j1" to get the error, as it will limit the amount of text you need to scroll through.
CCACHE
Here is a brief tutorial on the installation of Ccache, which can shorten build times drastically :
If you have room on your build system you can speed
your builds up considerably by using ccache. ccache is a compiler
cache. It speeds up re-compilation of C/C++ code by caching
previous compiles and detecting when the same compile is
being done again.
Install it with apt-get:
Code:
[COLOR="Black"]sudo apt-get install ccache[/COLOR]
Set environment vars for Android use:
(I put these exports in my .bashrc)
Code:
[COLOR="Black"]export USE_CCACHE=1
export NDK_CCACHE=ccache[/COLOR]
Set a cache size of 10G for optimal results:
Code:
[COLOR="black"]ccache -M 10G[/COLOR]
Check the status of your cache with the command:
Code:
[COLOR="black"]ccache -s [/COLOR]
Returns:
Code:
[COLOR="black"]
cache directory /home/jocala/.ccache
cache hit 106673
cache miss 18379
called for link 3758
preprocessor error 5
not a C/C++ file 4425
unsupported compiler option 678
no input file 4565
files in cache 36758
cache size 3.2 Gbytes
max cache size 10.0 Gbytes[/COLOR]
Instructions for submitting to Gerrit are listed here: http://forum.xda-developers.com/showpost.php?p=34095392&postcount=2588
ADVANCED INSTRUCTIONS FOR BUILDING CUSTOMIZATION
Special thanks to m4570d0n for putting this together for everyone
If you wanted to add something like, for example, Titanium Backup, you could go to /vendor/cm/config/common.mk and starting on line 98 where you see:
Code:
[COLOR="Black"]PRODUCT_COPY_FILES += \
vendor/cm/proprietary/RomManager.apk:system/app/RomManager.apk \
vendor/cm/proprietary/Term.apk:system/app/Term.apk \
vendor/cm/proprietary/lib/armeabi/libjackpal-androidterm4.so:system/lib/libjackpal-androidterm4.so \
vendor/cm/prebuilt/common/apps/Superuser.apk:system/app/Superuser.apk[/COLOR]
and add a line below that like this:
Code:
[COLOR="black"] vendor/cm/prebuilt/common/apps/TitaniumBackup.apk:system/app/TitaniumBackup.apk[/COLOR]
Then just place your TitaniumBackup.apk in the /vendor/cm/prebuilt/common/apps folder. You can modify that folder location to whatever folder you want to use, and you can substitute Titanium Backup with whatever apk you'd like. Take note though that this will install it as a system app in /system/app, while most apps would normally be installed as a user app in /data/apps. I think you could change the location to /data/app in that line, but I'm not positive. Someone please correct me if I'm wrong. I mean, I know you can, but I'm not sure if it would be an issue when you flash a zip without wiping /data and the zip file has files in /data.
You could also create your own github repo, name it something like vendor_onlychevys and add that repo to your local manifest with the path as vendor/onlychevys. Then you could use that as your directory path to the apps you want to add.
The slightly longer, but better way, is that you could also create your own make file in that repo by copying /device/samsung/skyrocket/cm.mk to your repo and rename it (let's say vendor_onlychevys/products/onlychevys_skyrocket.mk) and add a line in that file with something like this:
Code:
[COLOR="black"]# Inherit some common onlychevys stuff.
$(call inherit-product, vendor/onlychevys/config/common_full_phone.mk)[/COLOR]
and also editing the product name in that file near the bottom to something like this:
Code:
[COLOR="black"]PRODUCT_NAME := onlychevys_skyrocket[/COLOR]
You would need to make 3 more files.
In that same directory make a file called AndroidProducts.mk and in that file add this:
Code:
[COLOR="black"] PRODUCT_MAKEFILES := \
$(LOCAL_DIR)/onlychevys_skyrocket.mk[/COLOR]
Next, copy /vendor/cm/config/common_full_phone.mk to your repo at vendor_onlychevys/config/common_full_phone.mk. Then edit that file by adding a line in there with something like this:
Code:
[COLOR="black"]PRODUCT_COPY_FILES += \
vendor/onlychevys/prebuilt/common/apps/TitaniumBackup.apk[/COLOR]
And make sure to put your app in that prebuilt/common/apps/ directory in your repo.
Finally, create a new file in gedit (or other text editor of your choice). In that file add this:
Code:
[COLOR="black"] add_lunch_combo onlychevys_skyrocket-userdebug[/COLOR]
Name the file vendorsetup.sh and put it in your repo at vendor_onlychevys/vendorsetup.sh
Now, when you want to build you can run:
Code:
[COLOR="black"]. build/envsetup.sh
brunch onlychevys_skyrocket-userdebug[/COLOR]
This will be the same as if you used the regular command but will also include whatever apks you want to put in your repo, since you are just copying those files and adding a line to also include your stuff. This way, though you can add apps and/or make changes to your repo and you wont get errors about having local changes to vendor/cm or wherever when you try to run repo sync. You also wont have to keep deleting and re-adding the same files over and over after every sync because they will be in your own repo.
And just for clarity, your repo would look something like this:
Code:
[COLOR="black"]vendor_onlychevys
|-- config
| `-- common_full_phone.mk
|-- prebuilt
| `-- common
| | `-- apps
| | `-- TitaniumBackup.apk
|-- products
| |-- AndroidProducts.mk
| `-- onlychevys_skyrocket.mk
`-- vendorsetup.sh[/COLOR]
More advanced instructions to be posted as time allows. Now, get to work!
CHERRYPICKING: If you have progressed beyond the level of copying and pasting, and have begun researching the 'cherry-picking' process, there is a brief set of steps regarding this on post #1292 : http://forum.xda-developers.com/showthread.php?t=1798056&page=130.
This should give those interested a basic idea of the process. More detailed instructions are going to be posted as time allows.
NOTE: the cherry-picks listed in that tutorial are no longer neccesary. They have been merged, and don't require picking. But, for the informational purposes, the steps are useful. Thanks to m4570d0n for laying that out for everyone!
Links for all relevant topics:
Here are some relevant topics/tutorials/sites:
Download | Ubuntu - www.ubuntu.com/download
Official Ubuntu Documentation: Help for all versions. - https://help.ubuntu.com/
How To Windows Dual Boot: - https://help.ubuntu.com/community/WindowsDualBoot
How To Use The Terminal: Commandline stuff. - https://help.ubuntu.com/community/UsingTheTerminal/
[HOW TO] Beginners Guide to Android ROM Development - http://forum.xda-developers.com/showthread.php?t=1272270 (courtesy of isidromxz)
[Tutorial] Compile JB on Ubuntu - http://forum.xda-developers.com/showthread.php?t=1762641 (courtesy of dastin1015)
[CM10] [PPA] Cyanogenmod Compiler v0.6 - http://forum.xda-developers.com/showthread.php?t=1789190 (courtesy of lithid-cm)
[WIP][CM10] CyanogenMod 10 Alpha | tutorial - http://forum.xda-developers.com/showthread.php?t=1775133 (courtesy of sk8erwitskil)
[Wiki] How to: Gerrit - http://wiki.cyanogenmod.com/wiki/Howto:_Gerrit
[Wiki] How to: Git - http://wiki.cyanogenmod.com/wiki/Howto:_Git
[Wiki] How to: Connect to device with SSH - http://wiki.cyanogenmod.com/wiki/Howto:_Connect_to_Device_with_SSH
Here is an easy-to-use page on common Linux commands: - http://www.pixelbeat.org/cmdline.html
Linux Newbie Guide : - http://www.unixguide.net/linux/linuxshortcuts.shtml
Also, Team Chopsticks has a good page with some useful tips as well, located here:
http://www.teamchopsticks.org/p/contributing.html (thanks to bdusmc for the tip)
Here is a link to LIFEHACKER's command line tutorials. Very good stuff!! : http://lifehacker.com/5743814/become-a-command-line-ninja-with-these-time+saving-shortcuts
Building AOKP from source : http://rootzwiki.com/topic/31166-tutorial-so-you-want-to-build-aokp-jb-ubuntu-1204/
Link to AOKP (Android Open Kang Project) · GitHub :
https://github.com/AOKP
Link to AOKP news : http://aokp.co/index.php/news
Link to R41NS AOKP work : http://rootzwiki.com/topic/34092-aok...-2-jb-build-4/
Link to aznrice2k4s other Skyrocket and OneX work : http://forum.xda-developers.com/showthread.php?t=1956247
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Builds :
M4570D0N has a new PAC-man ROM for all to see, use and emulate!
Info:
based on the latest AOSPA (ParanoidAndroid 3.14+)
plus the latest CM10.1
plus the latest AOKP-MR1
In addition to everything included in the vanilla PAC-man build I've added:
internal/external sdcard storage options for Camera/Gallery
Alt-signal layout from AOKP
CM circle battery from CM10/10.1
Titanium Backup
ADWLauncher
M4570M0D v1.1
tiny gapps
Download:
http://d-h.st/sZo
I think you should call it project powerthrust....much catchier
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
i really want this thread to go somewhere so im going try and set up my build environment and see if i can get jb to compile. im using ubuntu 12.04 because i think soon its going to become the new standard for building. here is some instructions by sk8rwitskil http://forum.xda-developers.com/showthread.php?t=1766862
mbucks911 said:
no offense, but you probably should have actually built something before creating this thread because just creating this thread isnt going to "get the ball rolling" but what will is a starting point or an alpha build for the aspiring developers to look at and try to debug and make better. right now you just look like "that guy" that just wanted attention by trying to start something in the dev thread
Click to expand...
Click to collapse
I respectfully disagree. I am happy to see this thread (I think my comments in the WIP CM10 are what prompted it) and I fully support it. People need to have a place to learn to develop and build ROMs from source, and this is a step to help provide that place without clogging up other more focused dev threads. I don't think anyone is trying to use the thread to get attention, other than to get others involved, talking, debugging and building.
Tom
Yea it might have been better to post in general guys. Looking forward to this and good luck
Sent from my Nexus 7 using xda premium
I'm jumping on board here too. Feel free to mosey on over to fb and join our group. It's called Team NAND, it is for aspiring devs as well. Only it isn't intended for jb only.
I'm hoping to have all my prereqs set up by the weekend and ill post my first build here. Good luck everyone.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Go TEAM ROOKIE aha but yea I'm all set up and ready to go developing with everyone else
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
mbucks911 said:
no offense, but you probably should have actually built something before creating this thread because just creating this thread isnt going to "get the ball rolling" but what will is a starting point or an alpha build for the aspiring developers to look at and try to debug and make better. right now you just look like "that guy" that just wanted attention by trying to start something in the dev thread
i do want this thread to go somewhere so im going try and set up my build environment and see if i can get jb to compile. im using ubuntu 12.04 because i think soon its going to become the new standard for building. here is some instructions by sk8rwitskil http://forum.xda-developers.com/showthread.php?t=1766862
Click to expand...
Click to collapse
WOW that didn't take long. Thanks for that. Real helpful. I was trying to start a place for those of us that really want to provide builds, but HAVEN"T yet. I spent two days getting my environment together and have seen so many posts from other feeling the same way that this seemed like a good idea, until now. I specifically said that I assumed no control over this thread. If you actually looked anywhere else, you would see that myself and quite a few other rookies have been posting on sk8rs thread for the better part of two weeks. We need novices that want to help, not start static. Sheesh
Decepticaons said:
I'm jumping on board here too. Feel free to mosey on over to fb and join our group. It's called Team NAND, it is for aspiring devs as well. Only it isn't intended for jb only.
I'm hoping to have all my prereqs set up by the weekend and ill post my first build here. Good luck everyone.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Can you link the group, searching FB finds nothing.
dakpluto said:
Can you link the group, searching FB finds nothing.
Click to expand...
Click to collapse
As you wish!
https://www.facebook.com/#!/groups/205511066243382/
I am interested in this. What do I need to do to setup initial environment? Do I follow instructions by sk8rwitskil?
cnewsgrp said:
I am interested in this. What do I need to do to setup initial environment? Do I follow instructions by sk8rwitskil?
Click to expand...
Click to collapse
Do you have Ubuntu installed? If not install Ubuntu then follow the instructions here http://source.android.com/source/initializing.html after that you can follow sk8erwitskil's instructions
Sent from my Transformer Pad TF300T using Tapatalk 2
Fyi - i have a hercules, but im already down. Going to need to repartition my hdd, and work some stuff around... but ill get er done.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
cnewsgrp said:
I am interested in this. What do I need to do to setup initial environment? Do I follow instructions by sk8rwitskil?
Click to expand...
Click to collapse
Preferences vary among the Linux crowd, but from my own experience and what others have posted, Ubuntu is the easiest to install and get started with. Google it and their site will have everything you need, right down to an exe. for easy install. From there, follow the other's instructions for getting an environment set up. Any questions or issues, someone here will help, I'm sure.
EDIT: posted a link to this at the beginning of the thread
new ion? said:
Fyi - i have a hercules, but im already down. Going to need to repartition my hdd, and work some stuff around... but ill get er done.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Click to expand...
Click to collapse
I am a novice, so I don't know the particulars yet, but from what I've read it shouldn't be a serious issue. Maybe a fix here or there....
Decepticaons said:
I'm jumping on board here too. Feel free to mosey on over to fb and join our group. It's called Team NAND, it is for aspiring devs as well. Only it isn't intended for jb only.
I'm hoping to have all my prereqs set up by the weekend and ill post my first build here. Good luck everyone.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Link to the fb group? Searched, but with no luck.
EDIT: Nevermind. I see it was already asked/answered haha.
btm fdr said:
Link to the fb group? Searched, but with no luck.
Click to expand...
Click to collapse
You searched huh, its only 6 posts back
Sent from my SAMSUNG-SGH-I727 using xda premium
Credits:
Thanks to Arco, Realtyem and andres_a whose posts helped me to build the ROM from sources.
Most of the post is copied from the guide YardE's guide and a pdf whose author I could not find later. (Please let me know if I have missed somebody.)
*******************************************************
First get the build tools:
*******************************************************
1. Get the packages required for building the ROM.
On 10.04
Code:
sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl zlib1g-dev libc6-dev lib32ncurses5-dev ia32-libs \
x11proto-core-dev libx11-dev lib32readline5-dev lib32z-dev \
libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown \
libxml2-utils
sudo ln -s /usr/lib32/mesa/libGL.so.1 /usr/lib32/mesa/libGL.so
2. Download repo tool,
Code:
curl [url]https://dl-ssl.google.com/dl/googlesource/git-repo/repo[/url] > /tmp/repo
sudo mv /tmp/repo /usr/local/bin
export PATH=$PATH:/usr/local/bin
*******************************************************
Next: Get the source
*******************************************************
I have tried to build the source code from CyanogenMod for ICS version of Android and the device Samsung Galaxy S plus. (Already ported by Arco )
This example uses their repositories to download the code,
1. Get the android source code:
Code:
cd ~/work/cyanogenmod
repo init -u git://github.com/CyanogenMod/android.git -b ics
repo sync
The repo sync command takes some time which depends on your internet connection speed.
2. The above commands download the generic source code. For creating the ROM for the device Galaxy S Plus, we need to use the Arco's repositories.
3. Create a local_manifest.xml in ~/work/cyanogenmod/.repo as follows
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<remote name="arco" fetch="https://github.com/arco"/>
<project path="device/samsung/ariesve" name="android_device_samsung_ariesve" revision="ics" remote="arco"/>
<project path="kernel/ariesve" name="samsung-kernel-ariesve" remote="arco" revision="ics"/>
<project path="vendor/samsung/ariesve" name="android_vendor_samsung_ariesve" remote="arco" revision="ics"/>
<project path="frameworks/base" name="android_frameworks_base" remote="arco" revision="ics" />
<project path="kernel/msm7x30" name="samsung-kernel-msm7x30" remote="arco" revision="ics-2.6.35" />
</manifest>
4. Perform repo sync.
Code:
repo sync
*******************************************************
Building Kernel
*******************************************************
It is not necessary to build kernel – the one Arco have build is already located in ~/work/cyanogenmod/device/samsung/ariesve/prebuilt.
But if you still want to do that by our own, you should do the next thing: Download running kernel's config from your dvevice, then ungzip it and
save it as ~/work/cyanogenmod/kernel/ariesve/.config
Code:
adb pull /proc/config.gz
cat config.gz | gunzip > ~/work/cyanogenmod/kernel/ariesve/.config
rm config.gz
After that you should declare cross-compiler path variable:
Code:
export CCOMPILER=~/work/cyanogenmod/prebuilt/linux-x86/toolchain/arm-eabi-4.4.0/bin/arm-eabi-
Next step is to run
Code:
make oldconfig
Feel free to modify config, for example in ncurses gui:
Code:
make menuconfig
When you're done just execute
Code:
make ARCH=arm CROSS_COMPILE=$CCOMPILER -j5
where -j5 is number of your CPU cores+1;
When compile is over, the resulting zImage will be located in ~/work/cyanogenmod/kernel/ariesve/arch/arm/boot
As mentioned before, you should place it into ~/work/cyanogenmod/device/samsung/ariesve/prebuilt
So when kernel is ready, it's time for the greatest thing:
*******************************************************
Building CyanogenMod 9
*******************************************************
So when all the sources are downloaded, and (optional) kernel is built
let's start to build the CM.
First of all, download prebuilds:
Code:
~/work/cyanogenmod/vendor/cm/get-prebuilts
If you skipped kernel build chapter, please, export CCOMPILER
variable as mentioned there.
Next, edit file: ~/work/cyanogenmod/vendor/samsung/ariesve/device-vendorblobs.mk
and change “ancora” to “ariesve” on lines 25-28
and file ~/work/cyanogenmod/device/samsung/ariesve/BoardConfig.mk
and change “ancora” to “ariesve” on line 132.
The final part is actually building:
Code:
cd ~/work/cyanogenmod
bash
source build/envsetup.sh
lunch full_ariesve-eng
I wrote “bash” in the list of commands because envsetup.sh script
doesn't support some other shells.
Run the make command.
*******************************************************
Build issues.
*******************************************************
1. If you face an issue due to OverlayHtc.h file not found as below:
Code:
Notice file: hardware/libhardware_legacy/NOTICE -- out/target/product/ariesve/obj/NOTICE_FILES/src//system/lib/libpower.so.txt
Copy: out/target/product/ariesve/obj/lib/libaudioalsa.so
Copy: out/target/product/ariesve/obj/lib/libcamera.
target thumb C++: camera.msm7x30 <= device/samsung/ariesve/camerahal/cameraHAL.cpp
device/samsung/ariesve/camerahal/cameraHAL.cpp:31:27: error: ui/OverlayHtc.h: No such file or directory
Notice file: hardware/qcom/display/libcopybit/NOTICE -- out/target/product/ariesve/obj/NOTICE_FILES/src//system/lib/hw/copybit.msm7x30.so.txt
device/samsung/ariesve/camerahal/cameraHAL.cpp: In function 'camera_memory_t* wrap_memory_data(priv_camera_device_t*, const android::sp<android::IMemory>&)':
device/samsung/ariesve/camerahal/cameraHAL.cpp:268: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'ssize_t'
device/samsung/ariesve/camerahal/cameraHAL.cpp: In function 'int camera_set_preview_window(camera_device*, preview_stream_ops*)':
device/samsung/ariesve/camerahal/cameraHAL.cpp:488: error: invalid use of incomplete type 'struct android::eek:verlay'
device/samsung/ariesve/camerahal/CameraHardwareInterface.h:29: error: forward declaration of 'struct android::eek:verlay'
make: *** [out/target/product/ariesve/obj/SHARED_LIBRARIES/camera.msm7x30_intermediates/cameraHAL.o] Error 1
make: *** Waiting for unfinished jobs....
You need to get the fix by using following command:
Code:
cd ~/work/cyanogenmod/frameworks/base/ && git fetch [url]http://review.cyanogenmod.com/CyanogenMod/android_frameworks_base[/url] refs/changes/85/13285/8 && git cherry-pick FETCH_HEAD
(Thanks to the post on xda: http://forum.xda-developers.com/showthread.php?p=27475486#post27475486)
2. If you face an issue in compiling charger.c with following error:
Code:
prebuilt/linux-x86/toolchain/arm-linux-androideabi-4.4.x/bin/../lib/gcc/arm-linux-androideabi/4.4.3/../../../../arm-linux-androideabi/bin/ld: out/target/product/crespo/obj/EXECUTABLES/charger_intermediates/charger.o: in function main:system/core/charger/charger.c:958: error: undefined reference to 'gr_font_size'
prebuilt/linux-x86/toolchain/arm-linux-androideabi-4.4.x/bin/../lib/gcc/arm-linux-androideabi/4.4.3/../../../../arm-linux-androideabi/bin/ld: out/target/product/crespo/obj/EXECUTABLES/charger_intermediates/charger.o: in function main:system/core/charger/charger.c:991: error: undefined reference to 'gr_fb_blank'
prebuilt/linux-x86/toolchain/arm-linux-androideabi-4.4.x/bin/../lib/gcc/arm-linux-androideabi/4.4.3/../../../../arm-linux-androideabi/bin/ld: out/target/product/crespo/obj/EXECUTABLES/charger_intermediates/charger.o: in function main:system/core/charger/charger.c:699: error: undefined reference to 'gr_fb_blank'
prebuilt/linux-x86/toolchain/arm-linux-androideabi-4.4.x/bin/../lib/gcc/arm-linux-androideabi/4.4.3/../../../../arm-linux-androideabi/bin/ld: out/target/product/crespo/obj/EXECUTABLES/charger_intermediates/charger.o: in function main:system/core/charger/charger.c:732: error: undefined reference to 'gr_fb_blank'
If you aren't afraid of doing some editing, grab the function "gr_fb_blank"(line 377) and "gr_font_size" (line 210) out of bootable/recovery/minui/graphics.c and paste them into device/samsung/crespo/graphics.c (at the end of the file, and at line 158, respectively) for now. Tested booting, and tested system off charging and both seem to be ok. I'm not gonna look at logs since nothing is acting wonky lol.
(Thanks to the post on xda: http://forum.xda-developers.com/showthread.php?t=1399035&page=676)
==================================================
Ref. threads:
http://forum.xda-developers.com/showthread.php?t=1650615
Nice, but I don't recommend to use the outdated framework/base repo by arco.
Instead I suggest to use the CM repo and do the following.
Needs to be done once
Code:
cd frameworks/base
git remote add arco git://github.com/arco/android_frameworks_base.git
git fetch arco
Needs to be done after every repo sync
Code:
git cherry-pick 748a5e5f70858e5f5f77c65b7c185ec980f821f5
git cherry-pick f6d9aa858cbcabb29c1f941e2e8f0672360985ba
git cherry-pick 1a3e62ddae28b3f871ced2c1d40a18c7d8a6ea7d
So you can use the CM9 repo with the necessary changes made by arco.
EDIT:
And the CODE-Tags will make your post better readable.
I think that unknown pdf file tutorial is of vpukin..
Sent from my GT-I9001 using Tapatalk 2
also this isnt needed to synch in manifest.xml
<project path="vendor/samsung/ancora" name="android_vendor_samsung_ancora" remote="arco" revision="ics"/>
Click to expand...
Click to collapse
it isnt i9001 related
texten said:
also this isnt needed to synch in manifest.xml
it isnt i9001 related
Click to expand...
Click to collapse
right.
"ancora" is Galaxy W I8150, arco's phone
...but...where is the sense of this thread? only a cm9 tutorial for...build another ones?
Good guide , But why is there a $ in front of each command ? , when i enter them it gives error
PS: You can surround all codes with CODE Tags
Thanks for suggestion.
I would update the guide with code tags.
what packages I need to download for ubuntu 12.04?[finded]
hemansan said:
2. Download repo tool,
Code:
curl [url]https://dl-ssl.google.com/dl/googlesource/git-repo/repo[/url] > /tmp/repo
sudo mv /tmp/repo /usr/local/bin
export PATH=$PATH:/usr/local/bin
Click to expand...
Click to collapse
one command is missing
Code:
sudo chmod +x /usr/local/bin/repo
Do you know about a ROM that it's not builded for our beloved One S? Do you want to port it for our device? This easy guide will help you.
Requirements:
A One S.
A relatively recent computer (Linux, OS X, or Windows) w/a reasonable amount of RAM and about 35 GB of free storage. The less RAM you have, the longer the build will take. Using SSDs results in faster builds than traditional hard drives.
A micro USB cable.
A decent Internet connection & reliable electricity
Some familiarity with basic Android operation and terminology. It would help if you’ve installed custom roms on other devices and are familiar with what a recovery image such as ClockworkMod is, for example. It may also be useful to know some basic command line concepts such as cd for “change directory”, the concept of directory hierarchies, that in Linux they are separated by /, etc.
HERE IS THE GUIDE.
Installing Build Packages
Open the terminal and type: (for 64-bit&32-bit)
Code:
sudo apt-get install bison build-essential curl flex git-core gnupg gperf libesd0-dev libncurses5-dev libsdl1.2-dev libwxgtk2.8-dev libxml2 libxml2-utils lzop openjdk-6-jdk openjdk-6-jre pngcrush schedtool squashfs-tools xsltproc zip zlib1g-dev
In addition to the above, for 64-bit systems:
Code:
sudo apt-get install g++-multilib gcc-multilib lib32ncurses5-dev lib32readline-gplv2-dev lib32z1-dev
Creating Directories
In order to start building ROMs you'll need to create some directories
Code:
mkdir -p ~/bin
mkdir -p ~/yourworkingdirectory
Installing the REPO command
Enter the following to download the "repo" binary:
Code:
curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
Now lets give this the proper permissions to make it runnable:
Code:
chmod a+x ~/bin/repo
Put the ~/bin directory in your path of execution
Make sure that the ~/bin directory you just created is in your path of execution so that you can easily run the repo command even when you're not in ~/bin.
Code:
export PATH=${PATH}:~/bin
Initialize the source repository
Code:
cd yourworkingdirectory
Now you'll need the repo init related to the rom you'd like to build. Here i will insert some of the I used. Anyway to find this you can go the rom's github and search for the manifest (android or platform-manifest).Just choose the right branch.
Code:
repo init -u git://github.com/CyanogenMod/android.git -b cm-11.0
repo init -u git://github.com/LiquidSmooth/android.git -b kitkat
repo init -u git://github.com/SlimRoms/platform_manifest.git -b kk4.4-caf
Download the source code
This will download all the source code to your computer.Prepare to wait a long time while the source code downloads.
Code:
repo sync
Download device,kernel and vendor tree for Liquid
We will use CM ones. Thanks a lot.
Basically we need to add some projects to the download list. To do this we'll need a local_manifest.
Go in the .repo folder in your working directory(it's an hidden folder press ctrl+h). Create a new folder called "local manifests" then double click on it. Now you'll have to create a roomservice.xml file for the most of the ROMs and a slim_manifest.xml for SlimRoms, it's the same thing just the name it's different.
Open this file and paste this inside:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<remote name="github"
fetch="git://github.com/" />
<project name="CyanogenMod/android_device_htc_ville" path="device/htc/ville" remote="github" revision="cm-11.0" />
<project name="CyanogenMod/android_device_htc_s4-common" path="device/htc/s4-common" remote="github" revision="cm-11.0" />
<project name="CyanogenMod/android_device_htc_msm8960-common" path="device/htc/msm8960-common" remote="github" revision="cm-11.0" />
<project name="CyanogenMod/android_kernel_htc_msm8960" path="kernel/htc/msm8960" remote="github" revision="cm-11.0" />
<project name="TheMuppets/proprietary_vendor_htc" path="vendor/htc" remote="github" revision="cm-11.0" />
</manifest>
Now give another:
Code:
repo sync
and wait.
Do some modifications to the .mk files
Since we are using CM device tree we need to modify them for the choosen ROM.
Go into the device folder(device/htc/ville) and do some modifications. I will explain you what i mean using LiquidSmooth as example.
1) Create a new file called vendorsetup.sh . Open it and inside you'll have to write a script to add it to the lunch list.
Code:
add_lunch_combo liquid_ville-userdebug
You can choose if you want an userdebug version of the rom or an eng one just by writing eng instead of userdebug.
2) Now rename cm.mk into liquid.mk(for other ROMs this file should be renamed in a different way. Use an existing device tree to see the correct naming.)
3) Open the .mk file. You'll find something like this:
Code:
# Release name
PRODUCT_RELEASE_NAME := ville
# Boot animation
TARGET_SCREEN_HEIGHT := 960
TARGET_SCREEN_WIDTH := 540
# Inherit some common CM stuff.
$(call inherit-product, vendor/cm/config/common_full_phone.mk)
# Inherit device configuration
$(call inherit-product, device/htc/ville/device_ville.mk)
# Device naming
PRODUCT_DEVICE := ville
PRODUCT_NAME := cm_ville
PRODUCT_BRAND := htc
PRODUCT_MODEL := One S
PRODUCT_MANUFACTURER := HTC
# Set build fingerprint / ID / Product Name ect.
PRODUCT_BUILD_PROP_OVERRIDES += PRODUCT_NAME=htc_ville BUILD_FINGERPRINT=htc_europe/ville/ville:4.1.1/JRO03C/128506.8:user/release-keys PRIVATE_BUILD
You need to modify some things to make it buildable:
Code:
# Inherit some common CM stuff.
$(call inherit-product, vendor/cm/config/common_full_phone.mk)
becomes:
Code:
# Inherit some common LiquidSmooth stuff.
$(call inherit-product, vendor/liquid/config/common_phone.mk)
To understand the changes you'll have to go in the vendor folder searching the rom specific vendor and open the config folder to see what .mk file you need.You need to use your brain to understand what you should write instead of cm every ROM has different naming conventions.
This:
Code:
PRODUCT_NAME := cm_ville
becomes:
Code:
PRODUCT_NAME := liquid_ville
4) Now rename cm.dependencies in liquid.dependencies(SlimRoms does not require this step for unsupported devices.)
Start the build
Code:
source build/envsetup.sh
If you created the vendorsetup.sh in the right way you will read the ville folder.
Code:
lunch
Now you have to choose the number near the ville in the list of the supported devices.
If you have done all in the correct way in your terminal you'll see a page like this:
View attachment 2470228
Build
After lunching you have to start the build using the right command:
For liquid:
Code:
time mka liquid
For others:
Code:
make bacon
make
brunch devicename
Wait some time till the build ends hopefully with no errors.
Now You could think that i forgot you hboot 2.16 users.But this is not true. This is a cherry-pick that let you build every rom for 2.16 hboot.
Code:
cd device/htc/ville
git fetch http://review.cyanogenmod.org/CyanogenMod/android_device_htc_ville refs/changes/47/53647/9 && git cherry-pick FETCH_HEAD
Since you have no 4.4 recovery you'll need this other step:
Code:
Flashable via normal TWRP
add this line
SKIP_SET_METADATA := true
in device/htc/s4-common/BoardConfigCommon.mk
cherry-pick i think.
Code:
cd workingdirectory/build
git fetch http://review.cyanogenmod.org/CyanogenMod/android_build refs/changes/59/53559/6 && git cherry-pick FETCH_HEAD
Credits: http://wiki.cyanogenmod.org/w/Build_for_ville
and all the experience i got in this 2 months of building.
For most ROMS you'll have some overlays errors.
Just go in the overlay folder linked in the error and open config.xml. Just delete the lines in the error or search in the folder history the commit that you have to revert.
To revert a commit:
Code:
cd intheinteressedfolder
git revert thenumberofthecommit
Here is a screenshot of the what the number/name of the commit is:
View attachment 2470242
it might be a stupid question: so i dont need any programing skills?
Hai96 said:
it might be a stupid question: so i dont need any programing skills?
Click to expand...
Click to collapse
For building from source nope
phoenixita said:
For building from source nope
Click to expand...
Click to collapse
Ok, then I will test your Guide
Hai96 said:
Ok, then I will test your Guide
Click to expand...
Click to collapse
Added some lines in purple for 2.16 users.
@phoenixita Iam stucking at the point of doing modifications to the mk. files, i dont have a ville folder in my device folder...
View attachment 2471072
Hai96 said:
@phoenixita Iam stucking at the point of doing modifications to the mk. files, i dont have a ville folder in my device folder...
View attachment 2471072
Click to expand...
Click to collapse
Download device,kernel and vendor tree for Liquid
We will use CM ones. Thanks a lot.
Basically we need to add some projects to the download list. To do this we'll need a local_manifest.
Go in the .repo folder in your working directory(it's an hidden folder press ctrl+h). Create a new folder called "local manifests" then double click on it. Now you'll have to create a roomservice.xml file for the most of the ROMs and a slim_manifest.xml for SlimRoms, it's the same thing just the name it's different.
Open this file and paste this inside:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<remote name="github"
fetch="git://github.com/" />
<project name="CyanogenMod/android_device_htc_ville" path="device/htc/ville" remote="github" revision="cm-11.0" />
<project name="CyanogenMod/android_device_htc_s4-common" path="device/htc/s4-common" remote="github" revision="cm-11.0" />
<project name="CyanogenMod/android_device_htc_msm8960-common" path="device/htc/msm8960-common" remote="github" revision="cm-11.0" />
<project name="CyanogenMod/android_kernel_htc_msm8960" path="kernel/htc/msm8960" remote="github" revision="cm-11.0" />
<project name="TheMuppets/proprietary_vendor_htc" path="vendor/htc" remote="github" revision="cm-11.0" />
</manifest>
Now give another:
Code:
repo sync
and wait.
@phoenixita I had followed your guide and now I have the 3.0 liquid smooth build and it boots.
But the build process was very slow, my computer needed 4 hours to build this. Does it need only at the first building process so long or it's my computer ?
If I want to build paranoid android, what do I need to change?
Hai96 said:
@phoenixita I had followed your guide and now I have the 3.0 liquid smooth build and it boots.
But the build process was very slow, my computer needed 4 hours to build this. Does it need only at the first building process so long or it's my computer ?
If I want to build paranoid android, what do I need to change?
Click to expand...
Click to collapse
Paranoid android it's a different thing anyway rmbq has written a guide for porting PA.
4 hours it's okay...
i have another question
When I want to build AOKP,Slim Rom,... I need to create for every Rom a new working directory and download Repositorys,or?
Hai96 said:
i have another question
When I want to build AOKP,Slim Rom,... I need to create for every Rom a new working directory and download Repositorys,or?
Click to expand...
Click to collapse
Yes you need to download each source for each ROM you want to build in its own directory
---------- Post added at 09:02 PM ---------- Previous post was at 08:48 PM ----------
Hai96 said:
@phoenixita I had followed your guide and now I have the 3.0 liquid smooth build and it boots.
But the build process was very slow, my computer needed 4 hours to build this. Does it need only at the first building process so long or it's my computer ?
If I want to build paranoid android, what do I need to change?
Click to expand...
Click to collapse
Google how to set up ccache. It will reduce the time of the builds after you first initial build using it
phoenixita said:
Download device,kernel and vendor tree for Liquid
We will use CM ones. Thanks a lot.
Basically we need to add some projects to the download list. To do this we'll need a local_manifest.
Go in the .repo folder in your working directory(it's an hidden folder press ctrl+h). Create a new folder called "local manifests" then double click on it. Now you'll have to create a roomservice.xml file for the most of the ROMs and a slim_manifest.xml for SlimRoms, it's the same thing just the name it's different.
Open this file and paste this inside:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<remote name="github"
fetch="git://github.com/" />
<project name="CyanogenMod/android_device_htc_ville" path="device/htc/ville" remote="github" revision="cm-11.0" />
<project name="CyanogenMod/android_device_htc_s4-common" path="device/htc/s4-common" remote="github" revision="cm-11.0" />
<project name="CyanogenMod/android_device_htc_msm8960-common" path="device/htc/msm8960-common" remote="github" revision="cm-11.0" />
<project name="CyanogenMod/android_kernel_htc_msm8960" path="kernel/htc/msm8960" remote="github" revision="cm-11.0" />
<project name="TheMuppets/proprietary_vendor_htc" path="vendor/htc" remote="github" revision="cm-11.0" />
</manifest>
Now give another:
Code:
repo sync
and wait.
Click to expand...
Click to collapse
Can you incorporate the above instructions in the OP? You did lose me a bit.
Thanks for the guide perhaps a sticky?
ttaidapos said:
Can you incorporate the above instructions in the OP? You did lose me a bit.
Thanks for the guide perhaps a sticky?
Click to expand...
Click to collapse
they are in the OP...I've copied them........................................................
I want to build omni Rom for the One S but i get big Error after the lunch command...
Do you know what iam doing wrong?
View attachment 2474393
Hai96 said:
I want to build omni Rom for the One S but i get big Error after the lunch command...
Do you know what iam doing wrong?
View attachment 2474393
Click to expand...
Click to collapse
Have you renamed cm.mk in omni.Mk? And have you done the right chsnges?
phoenixita said:
Have you renamed cm.mk in omni.Mk? And have you done the right chsnges?
Click to expand...
Click to collapse
Yes I have renamed the .Mk files....
What do you mean with changes?
I have changed all the things from liquid to Omni
Gesendet von meinem HTC One S
Hai96 said:
Yes I have renamed the .Mk files....
What do you mean with changes?
I have changed all the things from liquid to Omni
Gesendet von meinem HTC One S
Click to expand...
Click to collapse
If you are just starting to build. Pick a different ROM than omni. It has a few more changes that needs made than the ones in this guide. And it will error with invalid integers which will be difficult for a new builder to fix.
WhiTeRhiNo said:
If you are just starting to build. Pick a different ROM than omni. It has a few more changes that needs made than the ones in this guide. And it will error with invalid integers which will be difficult for a new builder to fix.
Click to expand...
Click to collapse
I will give omni a try!
WhiTeRhiNo said:
If you are just starting to build. Pick a different ROM than omni. It has a few more changes that needs made than the ones in this guide. And it will error with invalid integers which will be difficult for a new builder to fix.
Click to expand...
Click to collapse
Can you name one Rom that can be build with this guide?
Make your 'own' Nougat-ROM today!
Thank you note: Thank you to the whole CM-Team for bringing up-to-date-Android to so many devices.
Overview
I. Preparation
II. Installation of the required packages
III. The sources
IV. Building the ROM
I. Preparation
Things you need for building:
A computer
An internet connection
An open mind
Time
Patience
First of all, you need a running up-to-date Ubuntu/Linux system. I am using Debian Stretch (testing) 64-bit.
Use the terminal to make the steps. A terminal window can be opened by pressing Ctrl+Alt+T. Every single command for the terminal is marked with a $ sign. Just paste every command (without the $ sign) to your terminal window and there shouldn't be any problem.
IMPORTANT: INSTALL EVERYTHING AS A NORMAL USER. DON'T INSTALL AS ROOT!
II. Installation of the required packages (Debian Stretch (testing) 64-bit)
For both 32-bit & 64-bit systems, you'll need:
Code:
$ sudo apt-get install bison build-essential curl flex \
git gnupg gperf libesd0-dev liblz4-tool \
libncurses5-dev libsdl1.2-dev libwxgtk2.8-dev libxml2 libxml2-utils \
lzop maven openjdk-7-jdk pngcrush schedtool \
squashfs-tools xsltproc zip zlib1g-dev
In addition to the above, for 64-bit systems, get these:
Code:
$ sudo apt-get install g++-multilib gcc-multilib \
lib32ncurses5-dev lib32readline-gplv2-dev lib32z1-dev
For Ubuntu 15.10 (wily) and newer, substitute:
lib32readline-gplv2-dev -> lib32readline6-dev
For Ubuntu 16.04 (xenial) and newer, substitute (additionally see java notes below):
libwxgtk2.8-dev -> libwxgtk3.0-dev
openjdk-7-jdk -> openjdk-8-jdk
Java versions: Different versions of CyanogenMod require different versions of the JDK (Java Development Kit):
CyanogenMod 7 - 9: Sun/Oracle Java SE 1.6
CyanogenMod 10.1: Sun/Oracle Java SE 1.6 or 1.7
CyanogenMod 10.2 - 11.0: Sun/Oracle Java SE 1.6 or 1.7 (OpenJDK 1.7 works fine, but the build system will display a warning)
CyanogenMod 12.0 - 13.0: OpenJDK 1.7 (see note about OpenJDK 1.8 below)
CyanogenMod 14.1: OpenJDK 1.8
Ubuntu 16.04 (Xenial Xerus) or newer and OpenJDK: Since OpenJDK 1.7 was removed from the official Ubuntu repositories, you have a couple options:
Obtain OpenJDK 1.7 from the openjdk-r PPA
Enable experimental OpenJDK 1.8 support in CyanogenMod 13.0 (not available in earlier version). To enable OpenJDK 1.8 support, add this line to your $HOME/.bashrc file:
Code:
export EXPERIMENTAL_USE_JAVA8=true
III. The sources
You will need to set up some directories in your build environment.
To create them:
Code:
$ mkdir -p ~/bin
$ mkdir -p ~/android/system
Install the repo command
Enter the following to download the "repo" binary and make it executable (runnable):
Code:
$ curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
$ chmod a+x ~/bin/repo
Put the ~/bin directory in your path of execution
In recent versions of Ubuntu, ~/bin should already be in your PATH. You can check this by opening ~/.profile with a text editor and verifying the following code exists (add it if it is missing):
Code:
# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/bin" ] ; then
PATH="$HOME/bin:$PATH"
fi
Time to initialize the CyanogenMod source repository
Enter the following to initialize the repository:
Note: Make sure the cm branch entered here is the one you wish to build and is supported on your device.
Code:
$ cd ~/android/system/
$ repo init -u https://github.com/CyanogenMod/android.git -b cm-14.1
Download the source code
To start the download of all the source code to your computer:
Code:
$ repo sync
The CM manifests include a sensible default configuration for repo, which we strongly suggest you use (i.e. don't add any options to sync). For reference, our default values are -j4 and -c. The -j4 part means that there will be four simultaneous threads/connections. If you experience problems syncing, you can lower this to -j3 or -j2. -c will ask repo to pull in only the current branch, instead of the entire CM history.
Prepare to wait a long time while the source code downloads.
IV. Building the ROM
Prepare the device-specific code
Code:
$ source build/envsetup.sh
$ breakfast jfltexx
Turn on caching to speed up build
You can speed up subsequent builds by adding
Code:
export USE_CCACHE=1
to your ~/.bashrc file. Then, specify the amount of disk space to dedicate to ccache by typing this from the top of your Android tree:
Code:
prebuilts/misc/linux-x86/ccache/ccache -M 50G
Start the build
Time to start building! So now type:
Code:
$ croot
$ brunch jfltexx
Happy building!
If you are familiar with your first build & GitHub, feel free to use the cm_build_script.
Code:
$ git clone https://github.com/BenJule/cm_build_scripts.git
Contributor
syphyr
BenJule
Can do this with i9515
Sent from my GT-I9505 using Tapatalk
Is this for I-9515 too or is it not?
salem.k.salem said:
Can do this with i9515
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Mario472 said:
Is this for I-9515 too or is it not?
Click to expand...
Click to collapse
Qualcomm only unless stated otherwise.
He just made a guide for people who don't want to wait for developers or people whom are looking to start building CM from source. Great guide, I had done similar while using the Moto G3. Thanks for this.
Sent from my GT-I9505 using XDA-Developers mobile app
christopherrrg said:
Qualcomm only unless stated otherwise.
He just made a guide for people who don't want to wait for developers or people whom are looking to start building CM from source. Great guide, I had done similar while using the Moto G3. Thanks for this.
Sent from my GT-I9505 using XDA-Developers mobile app
Click to expand...
Click to collapse
I now and i want to learn about it
And descover it
You should put this on xda chef section. Also you should tell how to get the right repo in manifest sync by checking GitHub branches. Nice guide.
---------- Post added at 06:06 PM ---------- Previous post was at 06:04 PM ----------
Mario472 said:
Is this for I-9515 too or is it not?
Click to expand...
Click to collapse
Similar, you need to add a local manifest with jfvelte's device tree. Here is it https://github.com/jfvelte-dev
Mario472 said:
Is this for I-9515 too or is it not?
Click to expand...
Click to collapse
for GT-i9505
In your case, you can replace the device ID in ./repo/local_manifests/your_device.xml
Greetings
BenLue
I keep getting
Code:
Communication error with Jack server (56). Try 'jack-diagnose'
build/core/java.mk:730: recipe for target '/home/dovi/android/out/target/common/obj/JAVA_LIBRARIES/core-all_intermediates/with-local/classes.dex' failed
make: *** [/home/dovi/android/out/target/common/obj/JAVA_LIBRARIES/core-all_intermediates/with-local/classes.dex] Error 41
#### make failed to build some targets (01:34:46 (hh:mm:ss)) ####
..what do I do?
DroidKing18 said:
I keep getting
Code:
Communication error with Jack server (56). Try 'jack-diagnose'
build/core/java.mk:730: recipe for target '/home/dovi/android/out/target/common/obj/JAVA_LIBRARIES/core-all_intermediates/with-local/classes.dex' failed
make: *** [/home/dovi/android/out/target/common/obj/JAVA_LIBRARIES/core-all_intermediates/with-local/classes.dex] Error 41
#### make failed to build some targets (01:34:46 (hh:mm:ss)) ####
..what do I do?
Click to expand...
Click to collapse
post more of the log. But probably need to allocate more memory for jack / reduce parallel compilations
last post here:
http://stackoverflow.com/questions/...lding-the-android-source-code-on-ubuntu-15-10
Ran into another error here:
Code:
make: *** No rule to make target '/home/dovi/android/out/target/common/obj/JAVA_LIBRARIES/org.apache.http.legacy_intermediates/classes.dex.toc', needed by '/home/dovi/android/out/target/common/obj/APPS/Development_intermediates/with-local/classes.dex'. Stop.
make: *** Waiting for unfinished jobs....
Anyone know a fix?
BenLue said:
Make your 'own' Nougat-ROM today!
Thank you note: Thank you to the whole CM-Team for bringing up-to-date-Android to so many devices.
Overview
I. Preparation
II. Installation of the required packages
III. The sources
IV. Building the ROM
I. Preparation
Things you need for building:
A computer
An internet connection
An open mind
Time
Patience
First of all, you need a running up-to-date Ubuntu/Linux system. I am using Debian Stretch (testing) 64-bit.
Use the terminal to make the steps. A terminal window can be opened by pressing Ctrl+Alt+T. Every single command for the terminal is marked with a $ sign. Just paste every command (without the $ sign) to your terminal window and there shouldn't be any problem.
can't do like this with windows?? any guide or idea??
thanks.
Click to expand...
Click to collapse
Mario472 said:
Is this for I-9515 too or is it not?
Click to expand...
Click to collapse
9515 is Jfvelte, correct? If yes you must modified your roomservice.xml
Example for Jfvelte
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="jfvelte-dev/android_device_samsung_jfvelte" path="device/samsung/jfvelte" remote="github" />
<project name="LineageOS/android_device_samsung_jf-common" path="device/samsung/jf-common" remote="github" />
<project name="LineageOS/android_device_qcom_common" path="device/qcom/common" remote="github" />
<project name="LineageOS/android_device_samsung_qcom-common" path="device/samsung/qcom-common" remote="github" />
<project name="LineageOS/android_external_stlport" path="external/stlport" remote="github" />
<project name="jfvelte-dev/android_kernel_samsung_jf" path="kernel/samsung/jf" remote="github" />
<project name="LineageOS/android_hardware_samsung" path="hardware/samsung" remote="github" />
<project name="LineageOS/android_packages_resources_devicesettings" path="packages/resources/devicesettings" remote="github" />
<project name="TheMuppets/proprietary_vendor_samsung" path="vendor/samsung" remote="github" />
<project name="TheMuppets/proprietary_vendor_qcom_binaries" path="vendor/qcom/binaries" />
</manifest>
Greetings
androidloveRs3104 said:
BenLue said:
Make your 'own' Nougat-ROM today!
Thank you note: Thank you to the whole CM-Team for bringing up-to-date-Android to so many devices.
Overview
I. Preparation
II. Installation of the required packages
III. The sources
IV. Building the ROM
I. Preparation
Things you need for building:
A computer
An internet connection
An open mind
Time
Patience
First of all, you need a running up-to-date Ubuntu/Linux system. I am using Debian Stretch (testing) 64-bit.
Use the terminal to make the steps. A terminal window can be opened by pressing Ctrl+Alt+T. Every single command for the terminal is marked with a $ sign. Just paste every command (without the $ sign) to your terminal window and there shouldn't be any problem.
can't do like this with windows?? any guide or idea??
thanks.
Click to expand...
Click to collapse
Install vmware or virtualbox!
Greetings
Click to expand...
Click to collapse
androidloveRs3104 said:
BenLue said:
Make your 'own' Nougat-ROM today!
Thank you note: Thank you to the whole CM-Team for bringing up-to-date-Android to so many devices.
Overview
I. Preparation
II. Installation of the required packages
III. The sources
IV. Building the ROM
I. Preparation
Things you need for building:
A computer
An internet connection
An open mind
Time
Patience
First of all, you need a running up-to-date Ubuntu/Linux system. I am using Debian Stretch (testing) 64-bit.
Use the terminal to make the steps. A terminal window can be opened by pressing Ctrl+Alt+T. Every single command for the terminal is marked with a $ sign. Just paste every command (without the $ sign) to your terminal window and there shouldn't be any problem.
can't do like this with windows?? any guide or idea??
thanks.
Click to expand...
Click to collapse
A better option is dualboot
Sent from my I9195I using Tapatalk
Click to expand...
Click to collapse
Doctor_Titi said:
Hello!
Thanks for your tutorial!
So, when i did
Code:
croot
, i got this message:
Code:
[email protected] ~/android/system $ croot
No command 'croot' found, did you mean:
Command 'chroot' from package 'coreutils' (main)
Command 'root' from package 'root-system-bin' (universe)
Command 'proot' from package 'proot' (universe)
croot: command not found
[email protected] ~/android/system $
Any idea?
Click to expand...
Click to collapse
Prepare the device
Code:
$ source build/envsetup.sh
$ breakfast seed(seed only exemple)
Ready Compile
Code:
$ croot
$ brunch seed(seed only exemple)
good luck :good:
Hello, I am compiling a Android 7 based ROM for my phone and after 4 hours of compilation it gives "out of memory error" and "try increasing the heap size".
I increased my heapsize by using " java -Xmx3072m" but still its showing the same error. My system specs are Core i3 peocessor and 6gb ram and using Ubuntu.
Can anyone please help me out ?
Suvam Mondal said:
Hello, I am compiling a Android 7 based ROM for my phone and after 4 hours of compilation it gives "out of memory error" and "try increasing the heap size".
I increased my heapsize by using " java -Xmx3072m" but still its showing the same error. My system specs are Core i3 peocessor and 6gb ram and using Ubuntu.
Can anyone please help me out ?
Click to expand...
Click to collapse
Try editing your jack setup file and reducing instances to compile to 2 or 1 from 4. I can't remember exact names as I'm not on Linux right now..
My java xmx is set at 6gb and i only have 2 instances set... your 6bg of ram may be the weak link here. Try xmx at 4500m
What size of a swap partition do you have? You may need to increase this too.
Buff99 said:
Try editing your jack setup file and reducing instances to compile to 2 or 1 from 4. I can't remember exact names as I'm not on Linux right now..
My java xmx is set at 6gb and i only have 2 instances set... your 6bg of ram may be the weak link here. Try xmx at 4500m
What size of a swap partition do you have? You may need to increase this too.
Click to expand...
Click to collapse
My swap partition is of 12gb
Suvam Mondal said:
My swap partition is of 12gb
Click to expand...
Click to collapse
12gb is more than enough.
try reducing your instances to 1 and leave mem at 3gb and see if that works.