I recently flashed to the uclf5 galaxy S3 r4 rom with mohans kernel and I love it. The only problem is the Data connections. The original APN that installed in the flash would connect and had great speeds but would not allow me to send or receive picture messages. Standard text's were ok but no pictures.
I looked around google and the XDA forums and tried a couple of new APN's. I finally got one that would connect and send pictures but it wasn't connecting to 4G LTE only 4G, 1st world problems yes but I wanted the LTE. as I continued searching I managed to get one to connect to LTE and still send pictures and everything was working perfectly, Except now the phone randomly disconnects from all connections with a little circle with a line through it instead of connection bars and obviously no data or phone calls. If I toggle back and forth between APN's I can get it to connect again but it's very intermittent sometimes it'll stay connected for hours other times for just minutes.
I originally had the SKYICS Superlite Rom installed and didn't have any connection issues what so ever and i'm completely at a loss as to what's going on now.
Original APN Settings
Name: ATT Phone
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not Set
MMSC: http ://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: None
APN type: default,mms,supl
APN protocol: IPv4
Allows Picture messaging but no LTE
Name: ATT
Phone
APN: wap.cingular
Proxy: Not Set
Port: Not set
Username: WAP @CINGULARGRPS.COM
Password: (Forgot but it's there)
Server: Not Set
MMSC: mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: None
APN type: default,mms,supl
APN protocol: IPv4
Allows Picture Messaging and LTE
Name: ATT LTE
APN: phone
Proxy: Not Set
Port: Not set
Username: Not set
Password: Not set
Server: Not Set
MMSC: Not set
MMS Proxy: Not set
MMS Port: Not set
MCC: 310
MNC: 410
Authentication Type: None
APN type: default,mms,supl
APN protocol: IPv4
I'm not sure how that last one works but it does.
These settings do work, but again pretty much at will. this morning i woke up and was conected to edge. that was scary...
I'm not sure if its my settings or tge radio or something else entirely. any help would be greatly appreciated.
I've been having the same problem. Everything will work for a few seconds then I get a "null cell state delivered" message when I check logcat. Changing APNs didn't work for me but how are you getting to the APN settings? Every time I try I just get a dialog box that tells me to insert a sim card.
Related
really have no idea whats going on, i used my phone like normal today running darky rom (port)
(yes i have an infuse 4g) and now my internet wont work at all, a few days ago i got a text from att saying that i was in the top 5% of internet users orsomething.
(i dont do any tethering, but i stream pandora all the time). i checked data at the time i was at 5gb.
i checked again now and im at 5.5 gg.
i thought that because i had an iphone 3g previously and had a grandfathered data plan that i should be alright.
(when i check data with *data# it says, (data 5519.3 of unlimited)
when i try to go to any website it loads for a long time then says "web page is not available"
any idea whats going on ?
The_Zodiac said:
really have no idea whats going on, i used my phone like normal today running darky rom (port)
(yes i have an infuse 4g) and now my internet wont work at all, a few days ago i got a text from att saying that i was in the top 5% of internet users orsomething.
(i dont do any tethering, but i stream pandora all the time). i checked data at the time i was at 5gb.
i checked again now and im at 5.5 gg.
i thought that because i had an iphone 3g previously and had a grandfathered data plan that i should be alright.
(when i check data with *data# it says, (data 5519.3 of unlimited)
when i try to go to any website it loads for a long time then says "web page is not available"
any idea whats going on ?
Click to expand...
Click to collapse
Check into settings---> wireless connections--->Mobile networks--->APN(access point names)
Just check you still got your att apns they may have erased or be bad information.
If that doesnt work go into recovery try a cache cleaning.
If that doesnt work try another ROM, if you still have no data then call ATT.
Hope it solves.
_____________________________________________
I dont know if this APN will work for you but heres some APN info:
Name: AT&T HSPA+
APN: phone
No User / Password
MMSC: http://mmsc.cingular.com
Proxy MMS: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
OR:
APN: wap.cingular
Proxy: [Leave Blank]
Port: [Leave Blank]
Username: [email protected]
Password: CINGULAR1
Server: [Leave Blank]
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: [Leave Blank]
MCC: 310
MNC: 410
koriotto said:
Check into settings---> wireless connections--->Mobile networks--->APN(access point names)
Just check you still got your att apns they may have erased or be bad information.
If that doesnt work go into recovery try a cache cleaning.
If that doesnt work try another ROM, if you still have no data then call ATT.
Hope it solves.
_____________________________________________
I dont know if this APN will work for you but heres some APN info:
Name: AT&T HSPA+
APN: phone
No User / Password
MMSC: http://mmsc.cingular.com
Proxy MMS: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
OR:
APN: wap.cingular
Proxy: [Leave Blank]
Port: [Leave Blank]
Username: [email protected]
Password: CINGULAR1
Server: [Leave Blank]
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: [Leave Blank]
MCC: 310
MNC: 410
Click to expand...
Click to collapse
yeah i checked my apn's and they were fine.
as it turns out i checked again the next morning and it was working no problem.
my guess is att was doing maintenance or something lol
Funny thing is my phone was doing the same thing. Must have been maintenance because all my phones weren't working.
Sent from my SAMSUNG-SGH-I997 using XDA App
So I'm running my Inspire on H2O. These are the settings that work the best for me, with data and MMS. (These are different than their site recommends.) Hopefully this helps someone...
Name:
H2O Wireless
APN:
att.mvno
Proxy:
Not set
Port:
Not set
Username:
Not set
Password:
Not set
Server:
Notset
MMSC:
http://mmsc.cingular.com
MMS Proxy:
proxy.mvno.H2OMobileweb.com
MMS Port:
80
MCC:
310
MNC:
410
Authentication Type:
Not set
APN Type:
Not set
APN Protocol:
IPv4
mannn ive been looking everywhere with APN settings that will work. I just got the Galaxy S 3 and im using H20 and i was looking everywhere to get the mms and data working. Do you think its a bit slow the mms ?
Step on my foot here but what's the H20?
thechive.com
CYRAXDroid said:
Step on my foot here but what's the H20?
thechive.com
Click to expand...
Click to collapse
H2O wireless.
http://en.m.wikipedia.org/wiki/H2O_Wireless
"I am the Bacon Pope"
cwhitney24 said:
H2O wireless.
http://en.m.wikipedia.org/wiki/H2O_Wireless
"I am the Bacon Pope"
Click to expand...
Click to collapse
Oh..
thechive.com
I'm pretty sure Straight Talk does all that with unlimited data for $45 a month. I get 2Mb/s D and 1Mb/s U in a large area covering two states, PA and MD. Using an AT&T unlocked Note.
joe3681 said:
So I'm running my Inspire on H2O. These are the settings that work the best for me, with data and MMS. (These are different than their site recommends.) Hopefully this helps someone...
Name:
H2O Wireless
APN:
att.mvno
Proxy:
Not set
Port:
Not set
Username:
Not set
Password:
Not set
Server:
Notset
MMSC:
http://mmsc.cingular.com
MMS Proxy:
proxy.mvno.H2OMobileweb.com
MMS Port:
80
MCC:
310
MNC:
410
Authentication Type:
Not set
APN Type:
Not set
APN Protocol:
IPv4
Click to expand...
Click to collapse
Thank You Im using the Nexus 5 and it works perfectly.
9/21/14
These settings don't work anymore. Or at least picture messaging doesn't work
webekyle said:
9/21/14
These settings don't work anymore. Or at least picture messaging doesn't work
Click to expand...
Click to collapse
These are the settings I have that work for both 4G data and picture messaging. I'm using an AT&T ZTE Radiant Z740 Go Phone. Your setting options may or may not be different, you may have more or less settings, just plug in the info that seems to match what I posted. If you have to manually type APN Type then make sure no spaces are entered or auto added between "default,supl,mms". That prevented me from picture messaging for a long time before I noticed I had spaces.
Name: H2O
APN : att.mvno
Proxy: 66.209.11.33
Port: 80
Username: Not set
Password: Not set
Server: Not set
MMSC: h t t p : / / m m s c . c i n g u l a r . c o m (remove SPACES)
MMS Proxy: 66.209.11.33
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Not Set
APN type: default,supl,mms
APN e/d: APN Enabled (greyed out)
Bearer: Unspecified
I have been looking for this info for hours today and can't find a simple response.
I tried the *#*#4636#*#* trick, it doesn't stick.
Can someone post APNs that force 2G, 3G, and 4G non-LTE for the AT&T One X?
Is there a working mod that installs a toggle for this?
4636 trick is working fine for me.. but i'm not in AT&T..i'm using it in india and using cleanrom std.
I'm going to answer one of my own questions here folks, this is the LTE (true 4G) disable.
go to Settings>Mobile Network>Access Point Names
Click the Menu button, and select "New APN"
Enter the following:
Name: Media Net (name doesn't really matter, as long as its different from the original APN)
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: [email protected]
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,supl,mms (no spaces after each comma)
Bearer: Unspecified
then hit back a few times, you may need to reboot for this to work
can someone post the 2G APN?
theartialmartist said:
I'm going to answer one of my own questions here folks, this is the LTE (true 4G) disable.
go to Settings>Mobile Network>Access Point Names
Click the Menu button, and select "New APN"
Enter the following:
Name: Media Net (name doesn't really matter, as long as its different from the original APN)
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: [email protected]
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,supl,mms (no spaces after each comma)
Bearer: Unspecified
then hit back a few times, you may need to reboot for this to work
can someone post the 2G APN?
Click to expand...
Click to collapse
does the above APN give anyone constant disconnects/reeaallly spotty 4G?
I really want to permanently disable LTE but not at the expense of losing data every 2 blocks in NYC
please halp
theartialmartist said:
I'm going to answer one of my own questions here folks, this is the LTE (true 4G) disable.
go to Settings>Mobile Network>Access Point Names
Click the Menu button, and select "New APN"
Enter the following:
Name: Media Net (name doesn't really matter, as long as its different from the original APN)
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: [email protected]
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,supl,mms (no spaces after each comma)
Bearer: Unspecified
then hit back a few times, you may need to reboot for this to work
can someone post the 2G APN?
Click to expand...
Click to collapse
theartialmartist said:
does the above APN give anyone constant disconnects/reeaallly spotty 4G?
I really want to permanently disable LTE but not at the expense of losing data every 2 blocks in NYC
please halp
Click to expand...
Click to collapse
Its a known issue and it happens with everyone. Most likely because the LTE radio is still active , it just cant connect because the APN wont authenticate it. We need a true LTE off switch
Alright, so after quite some time of messing with things, I'm coming to you guys for help.
The long and short of it is that I can't seem to send messages longer than 150 characters (they just end abruptly for the person receiving at 150, I get a 'message not sent' error), or receive (certain) types of MMSes. Pictures aren't working either. (Edit: I can send pictures after all, but with a massive delay)
I'm running the official AOKP release (build 40), and have swapped between the UCLE2 and UCLF5 radio with the problem remaining the same. Don't know why it should matter, but I'm using InstigatorX's kernel, v2.4d.
My APN Settings:
Name: ATT PTA
APN: pta
Proxy: Not set
Port: Not Set
Username: Not Set
Server: Not Set
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: None
APN type: default,mms,sulp,hipri
APN protocol: IPv4
Bearer: Unspecified (have also tried using LTE. Does not fix error.)
Skyrocket on CM9 stable.
Hey, I need some help with APN settings from someone who does have LTE in their area. we have good LTE coverage out here but my data seems to keep dropping out, not sure why. I get a signal strength bar at the top but there is no letter indicator of what network type im on. my only hope right now is using a wifi connection but even then I don't have MMS. here are my current APN settings:
apn: wap.cingular
proxy: wireless.cingular.com
port: 80
username: [email protected]
password: not set
server: not set
mmsc: http://mmsc.cingular.com
mms proxy: wireless.cingular.com
mms port: 80
MCC: 310
MNC: 410
authentication type: none
APN type: default,supl,internet + mms,*
APN protocol: IPv4/IPv6
Bearer: unspecified
HELP!!
1 sec of Google:
http://rootzwiki.com/topic/31135-att-apns-for-custom-roms/
Jack_R1 said:
1 sec of Google:
http://rootzwiki.com/topic/31135-att-apns-for-custom-roms/
Click to expand...
Click to collapse
thanks. not 2 secs?