Related
So I been trying to fix my friends Captivate for a few days now.
I posted a video a few days ago. I did get it into download mode with my jig. However everything froze while I used the 1 click captivate heimdall to flash my phone. (It did flash but some things did not work)
Anyhow now My phone has "Phone - ! - PC"
No download mode, the jig sends it back to this screen too. I tried so many button combinations. I really don't want to send my phone in to some website. I was so freakin close...
Please help
My Evo 3D is laughing at me and the captivate.
I pull out my battery and let it discharge for about 15 secs and hold volume buttons then connect USB cable and finally insert battery while still holding volume buttons of course, it'll get you into download mode. Never failed me. I've had my phone not even turn on the screen, it stays dark during a screwed up flash with odin. I then flash UCKI2 with bootloaders and then flash to gingerbread ROM I like. If you plan on installing custom ROMs your phone will semi-brick numerous times. If its showing a phone, exclamation mark and computer with a message saying firmware flashing failed. That is perfect! Just make sure you have Samsung USB drivers and simply flash using odin, it'll show COM and a number like 5 (COM5) then just flash. I'd advise you to remove any external SD card and restart before using odin it acts up. Hope this helps
hupo224 said:
So I been trying to fix my friends Captivate for a few days now.
I posted a video a few days ago. I did get it into download mode with my jig. However everything froze while I used the 1 click captivate heimdall to flash my phone. (It did flash but some things did not work)
Anyhow now My phone has "Phone - ! - PC"
No download mode, the jig sends it back to this screen too. I tried so many button combinations. I really don't want to send my phone in to some website. I was so freakin close...
Please help
My Evo 3D is laughing at me and the captivate.
Click to expand...
Click to collapse
The "Phone - ! - PC" will be your download mode screen. Just download from there.
However, if a flash goes foul somehow, you may be left with the infamous "phone--/!\--PC" screen.
If you see this, don't panic. Although it's not technically the download mode screen, many users (including myself) have been able to successfully flash from that screen. Give it a try.
Click to expand...
Click to collapse
Comes from this thread:
http://forum.xda-developers.com/showthread.php?t=1351224
Let me reiterate cause it will save you the same thing happening, reboot your computer, be connected to internet, remove SD card and then open odin and then connect your phone and flash otherwise high likelihood of something going wrong again. I'm used to it but its frustrating the first couple times.
asasione said:
Comes from this thread:
http://forum.xda-developers.com/showthread.php?t=1351224
Let me reiterate cause it will save you the same thing happening, reboot your computer, be connected to internet, remove SD card and then open odin and then connect your phone and flash otherwise high likelihood of something going wrong again. I'm used to it but its frustrating the first couple times.
Click to expand...
Click to collapse
100% - I had similar experience with my first flash but after a few goes at it and 3 or 4 "soft-bricks" all has been great!
Well when I plug it in Windows 7 doesn't even detect it anymore. But the phone will go back to that screen when the USB is connected.
Nothing in ODIN/Heimdall pops up...
Please help..
It seems I got it in download mode this morning with the jig. Just trying to get my damn pc to read it. Sometimes the right drivers work sometimes they don't. ugh
Connection issue in my sig
Any chance you have another pc to try it with? Or possibly another cable?
Going to try one click on ubuntu...
Ive had issues in the past before with certain USB ports on my PC not reading the phone.
Try plunging in your phone to a different USB port and it can make a world of difference with the driver issue (even if you have to plug it in the back of your PC).
try one click unbrick in the android development page
hupo224 said:
Well when I plug it in Windows 7 doesn't even detect it anymore. But the phone will go back to that screen when the USB is connected.
Nothing in ODIN/Heimdall pops up...
Please help..
Click to expand...
Click to collapse
Are you running x64? If so are you running the 64 bit drivers?
I also had the same issue a couple of times, which is technically called a "soft brick" . You could resolve this issue using ODIN flasher and reverting back to stock. Now coming to USB problem in windows, this is a known issue with windows (especially Vista and Win7) and samsung!! The remedy which I found is as follows :-
1.Disconnect the phone from USB
2.Remove samsung USB driver software from your windows PC.
3.Reboot and then navigate to C:\Program Files\ (assuming that C:\ is your windows OS partition)
Delete "samsung" folder.
4.Download latest samsung USB Drivers for captivate and install.
5.Reboot the phone.
6.Open ODIN and connect your Phone to PC.
It should detect the COM Port by now. Try this and get back
"Thanks" , If I helped U
I looked through quite a few threads with the "stuck at samsung logo" problem, but none seems to be the same as mine...
I tried several roms (Vegabond, Zeus ZTR for ~2 months, Aeon, Legend 3 for ~2 weeks), and then tried to flash MIUI (specifically MIUI.us.Aries_v4_2.7.20_Eng_Deo_ZipA_Signed_TMT.zip). After installing the zip, I thought I tried reflashing it again for good measure, so I went into advanced / reboot recovery in CWM, and that's when the phone get stuck at the samsung logo.
This seems a bit different than others in that it won't turn off. Holding the power button will shut down, then get back to the same place one second later. Nothing I did can get the phone to anything but the Samsung logo. I decided to just leave the phone plugged in last night, at least to charge the battery. This morning it looks like I can finally get the phone into download mode, but neither Odin nor the Heimdall one-click recognizes the phone (I did install Kies). I start with the battery out, phone unplugged. Then press and hold the v+/v-, plug in USB (the PC blips the "USB sound" a couple of times, but shows the "device not recognized" message), and then insert the battery. As soon as I do that, the phone gets into download mode (ask to press v+ to download or v- to reboot) but the PC then blips the "USB disconnect" sound, and neither Odin nor Heimdall one-click can see the phone. The phone just shows the yellow triangle with andoid shoveling, and on top it says "CUSTOM BINARY DOWNLOAD: YES (1 counts)"
I'd really appreciate any pointers...
fishline said:
I looked through quite a few threads with the "stuck at samsung logo" problem, but none seems to be the same as mine...
I tried several roms (Vegabond, Zeus ZTR for ~2 months, Aeon, Legend 3 for ~2 weeks), and then tried to flash MIUI (specifically MIUI.us.Aries_v4_2.7.20_Eng_Deo_ZipA_Signed_TMT.zip). After installing the zip, I thought I tried reflashing it again for good measure, so I went into advanced / reboot recovery in CWM, and that's when the phone get stuck at the samsung logo.
This seems a bit different than others in that it won't turn off. Holding the power button will shut down, then get back to the same place one second later. Nothing I did can get the phone to anything but the Samsung logo. I decided to just leave the phone plugged in last night, at least to charge the battery. This morning it looks like I can finally get the phone into download mode, but neither Odin nor the Heimdall one-click recognizes the phone (I did install Kies). I start with the battery out, phone unplugged. Then press and hold the v+/v-, plug in USB (the PC blips the "USB sound" a couple of times, but shows the "device not recognized" message), and then insert the battery. As soon as I do that, the phone gets into download mode (ask to press v+ to download or v- to reboot) but the PC then blips the "USB disconnect" sound, and neither Odin nor Heimdall one-click can see the phone. The phone just shows the yellow triangle with andoid shoveling, and on top it says "CUSTOM BINARY DOWNLOAD: YES (1 counts)"
I'd really appreciate any pointers...
Click to expand...
Click to collapse
First thing I suggest is to uninstall Kies, it has been known to cause issues. Second get the drivers back on the computer, you will find them here http://forum.xda-developers.com/showthread.php?t=1610374
thanks to bigjoe2675.
From this point,there is more than one way to do this, my choice is this, because it always works for me http://forum.xda-developers.com/showthread.php?t=1524081 all credit to qkster and Entropy512.
Should you wish to give MIUI another try please post in that thread and I will help.
BTW, it is normal to get stuck on the Samsung screen when you go from GB to ICS. There are instructions posted in the OP of the ICS rom for proper way to flash.
I un-installed Kies and all the other samsung drivers from win7, rebooted win7, re-installed the Infuse driver from ISET thread, rebooted win7 again, then tried connecting the Infuse (battery out, hold v+/v-, plug in USB, then insert battery). Infuse will ask whether to go into download mode, and win7 complained about unrecognized USB device. If I press v+ to go into download mode on the infuse (shows the yellow triangle and "Downloading... Do not turn off Target!!!" message), win7 blips the USB disconnect sound. The Heimdall one-click 1.3.1 shows "Device state: Disconnected" the whole time. Tried it several times with the same result. Any more ideas/suggestions?
Can u get to CWM?
Pony Express said:
Can u get to CWM?
Click to expand...
Click to collapse
Like pony said, ur supposed to get stuck at Samsung logo after flashing ics ROM from GB. Try to hold both volume keys and power button to turn on ur phone. Hopefully this will get u back to recovery, then u just need to flash miui again.
I'm thinking this might b ur problem bc the previous ROMs u mentioned were GB.
Sent from my SGH-I997 using xda app-developers app
fishline said:
I un-installed Kies and all the other samsung drivers from win7, rebooted win7, re-installed the Infuse driver from ISET thread, rebooted win7 again, then tried connecting the Infuse (battery out, hold v+/v-, plug in USB, then insert battery). Infuse will ask whether to go into download mode, and win7 complained about unrecognized USB device. If I press v+ to go into download mode on the infuse (shows the yellow triangle and "Downloading... Do not turn off Target!!!" message), win7 blips the USB disconnect sound. The Heimdall one-click 1.3.1 shows "Device state: Disconnected" the whole time. Tried it several times with the same result. Any more ideas/suggestions?
Click to expand...
Click to collapse
Once you install Kies or any Samsung driver to a port, Heimdall previous device recognition is erased.
If you want to use Heimdall in that specific usb port again, you need to reinstall heimdall drivers.
You can also move the usb cord to a different usb port or try a different usb DATA cord and reinstall the Heimdall drivers
benbos_06 said:
Like pony said, ur supposed to get stuck at Samsung logo after flashing ics ROM from GB. Try to hold both volume keys and power button to turn on ur phone. Hopefully this will get u back to recovery, then u just need to flash miui again.
I'm thinking this might b ur problem bc the previous ROMs u mentioned were GB.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
@Pony_Express: No CWM. Can only get into download mode.
@Benbos_06: I did try volume up & volume down (that's what I meant by v+/v-). If I add the power button to the mix I only get the Samsung logo. If I do any button combo without plugging in the USB, I also get only the Samsung logo. I have to do exactly v+/v-, plug in USB, then insert the battery, to get anything other than the Samsung logo.
@qkster: By Heimdall drivers, do you mean the one in the ISET thread (SGH-i997_Infuse4G_USB_Drivers_5_2_0_2.zip)? That's the one I re-installed after removing Kies and all other samsung drivers I saw. I just un-installed it again, reboot, re-install, reboot, change to a different cable and different port. Still the same problem: As soon as the usb cable is plugged in (while v+/v- are held down), the PC blips USB connect but displays the "USB device not recognized" message. If I then insert the battery to have the phone power up to the screen where it asks if I really want to go into download mode, as soon as I hit the v+ to go into the download mode, the PC blips the USB disconnect sound. Is the device recognition supposed to happen before or after going into download mode?
Looks like as long as the PC does not recognize the phone, neither Heimdall or Odin can work. Is this right? From what I gathered, as long as I can get into the download mode, it's a soft-brick and the situation isn't hopeless. However, I'm really at my wits' end as to how to move further ahead...
fishline said:
@Pony_Express: No CWM. Can only get into download mode.
@Benbos_06: I did try volume up & volume down (that's what I meant by v+/v-). If I add the power button to the mix I only get the Samsung logo. If I do any button combo without plugging in the USB, I also get only the Samsung logo. I have to do exactly v+/v-, plug in USB, then insert the battery, to get anything other than the Samsung logo.
@qkster: By Heimdall drivers, do you mean the one in the ISET thread (SGH-i997_Infuse4G_USB_Drivers_5_2_0_2.zip)? That's the one I re-installed after removing Kies and all other samsung drivers I saw. I just un-installed it again, reboot, re-install, reboot, change to a different cable and different port. Still the same problem: As soon as the usb cable is plugged in (while v+/v- are held down), the PC blips USB connect but displays the "USB device not recognized" message. If I then insert the battery to have the phone power up to the screen where it asks if I really want to go into download mode, as soon as I hit the v+ to go into the download mode, the PC blips the USB disconnect sound. Is the device recognition supposed to happen before or after going into download mode?
Looks like as long as the PC does not recognize the phone, neither Heimdall or Odin can work. Is this right? From what I gathered, as long as I can get into the download mode, it's a soft-brick and the situation isn't hopeless. However, I'm really at my wits' end as to how to move further ahead...
Click to expand...
Click to collapse
Okay, I wasn't sure if it was soft bricked or if u still had recovery but were looping.
The device is supposed to b recognized by Heimdall/Odin while it is in download mode. I don't even think my computer showed it being recognized until I started Heimdall then Heimdall recognized it.
I would keep trying with different Heimdall/Odin versions and different combinations of cords and ports or a different computer if that's an option. Even if the computer doesn't show it as recognized try to open the Heimdall one click or Odin to see if it shows the device. For me, it took like afew hours of messing around with different combos of these to finally get it recognized.
The last option is to get a usb jig (believe that's what it is called). They r cheap and r supposed to give u a much better chance of having ur phone recognized. But I would keep trying different ports, cords, computers (if that's an option) first.
Sent from my SGH-I997 using xda app-developers app
qkster is offline but will most likely be back soon. To answer your question @qkster: By Heimdall drivers, do you mean the one in the ISET thread (SGH-i997_Infuse4G_USB_Drivers_5_2_0_2.zip)? - he is actually talking about the latest Java drivers, you will find his link right under How To Install. After installing, it would be a good idea to restart your computer and then follow the rest of his install instructions. You are in a good place, be patient, you are doing great.
Edit: Just re-read your post - qkster can correct me if this is incorrect- In order for your computer to recognize your phone after you have the drivers installed, you should power the phone on and let it display the Samsung screen. At that point connect your usb cable but do not press volume keys to enter download mode at this time. Once your computer recognizes your phone then you can proceed.
fishline said:
u mean the one in the ISET thread (SGH-i997_Infuse4G_USB_Drivers_5_2_0_2.zip)? That's the one I re-installed after removing Kies and all other samsung drivers I saw. I just un-installed it again, reboot, re-install, reboot, change to a different cable and different port. Still the same problem: As soon as the usb cable is plugged in (while v+/v- are held down), the PC blips USB connect but displays the "USB device not recognized" message. If I then insert the battery to have the phone power up to the screen where it asks if I really want to go into download mode, as soon as I hit the v+ to go into the download mode, the PC blips the USB disconnect sound. Is the device recognition supposed to happen before or after going into download mode?
Looks like as long as the PC does not recognize the phone, neither Heimdall or Odin can work. Is this right? From what I gathered, as long as I can get into the download mode, it's a soft-brick and the situation isn't hopeless. However, I'm really at my wits' end as to how to move further ahead...
Click to expand...
Click to collapse
As long as you can get into download mode, you don't really need a jig. It is a handy tool, though. No battery pull. Just plug in the jig.
http://forum.xda-developers.com/showthread.php?t=1524081
Here is the heimdall 1 click uclb3. Read the op a few times. You will need to flash it 2 times...the second time with boot loader checked.
the drivers you mentioned is for odin or samsung..not for heimdall..it has it's own self contained drivers.
Try a different pc or a usb port with a known good usb data cord.
After you run the jar file, look thru the options. you should see option to install drivers - via zadig
Okay man i had the exact same problem
And your right no one has the answer but after a week off research i noticed that its easier to go to an at&t store and get a new one. I was worried that they would find out but they didn't and just gave me a new one
Sent from my SGH-I997 using xda app-developers app
OK. I un-installed the Samsung drivers and reboot the PC. Re-download the Heimdall one-click back to stock jar. Ran it, clicked on "install Heimdall 1.3.1" from the Help menu. It first complained that I have a newer VC++ redistributable than what it tried to install. Closed that dialog, then it ran zadig. With the phone connected and in d/l mode, the "list all devices" option does not find the phone. Tried a different cable and port to no avail.
Moved to another PC (WinXP instead of Win7). The VC++ redistributable installs. Zadig finds an unknown device (which I'm quite sure is the phone), but driver install fails. I guess it really needs to find the SAMSUNG USB composite device? Would I be able to use the "create a new device" menu to force it? If so I guess I need to put in the usb id?
Yoshiikim said:
Okay man i had the exact same problem
And your right no one has the answer but after a week off research i noticed that its easier to go to an at&t store and get a new one. I was worried that they would find out but they didn't and just gave me a new one
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
I don't think I have that luxury: I bought the phone used off craigslist about 2-3 months ago. I doubt AT&T would exchange the phone w/o receipt.
fishline said:
OK. I un-installed the Samsung drivers and reboot the PC. Re-download the Heimdall one-click back to stock jar. Ran it, clicked on "install Heimdall 1.3.1" from the Help menu. It first complained that I have a newer VC++ redistributable than what it tried to install. Closed that dialog, then it ran zadig. With the phone connected and in d/l mode, the "list all devices" option does not find the phone. Tried a different cable and port to no avail.
Moved to another PC (WinXP instead of Win7). The VC++ redistributable installs. Zadig finds an unknown device (which I'm quite sure is the phone), but driver install fails. I guess it really needs to find the SAMSUNG USB composite device? Would I be able to use the "create a new device" menu to force it? If so I guess I need to put in the usb id?
Click to expand...
Click to collapse
It's been a while for me but try to install the samsung usb composite device to see it it makes any difference.
The other thing you can try is a newer usb hub (if you have one) between your pc and the phone.
qkster said:
It's been a while for me but try to install the samsung usb composite device to see it it makes any difference.
The other thing you can try is a newer usb hub (if you have one) between your pc and the phone.
Click to expand...
Click to collapse
I've tried it on all USB ports of a third PC with the same result. Tried both USB cable I have (one stock Infuse, the other stock SGS2, look identical). Does it matter exactly when I put the phone into d/l mode? If I leave the phone on the "warning" screen, zadig can see the "Unknown device" but can't install driver. As soon as I press volume + on the phone to go into d/l mode, the "Unknown device" disappear from the list. If I put the phone into d/l mode first before zadig starts, it doesn't even see the "unknown device".
Does anyone know if there's a way to force zadig to install the correct driver? Would that help?
fishline said:
I've tried it on all USB ports of a third PC with the same result. Tried both USB cable I have (one stock Infuse, the other stock SGS2, look identical). Does it matter exactly when I put the phone into d/l mode? If I leave the phone on the "warning" screen, zadig can see the "Unknown device" but can't install driver. As soon as I press volume + on the phone to go into d/l mode, the "Unknown device" disappear from the list. If I put the phone into d/l mode first before zadig starts, it doesn't even see the "unknown device".
Does anyone know if there's a way to force zadig to install the correct driver? Would that help?
Click to expand...
Click to collapse
It has been a while since I had to install heimdall. I keep that specific pc, that usb port and that usb cord sacred.
I install nothing else as I treat this as my infuse life line.
I found a few links that may help:
http://www.thegalaxytabforum.com/index.php?/topic/4757-how-to-use-heimdall/
http://forum.xda-developers.com/showthread.php?t=1113195
http://www.glassechidna.com.au/products/heimdall/
All I can say is persistence pays off.
If not, try Odin...if you use Odin, just remember to reinstall samsung kies device drivers and use a different usb port.
gl
qkster said:
It has been a while since I had to install heimdall. I keep that specific pc, that usb port and that usb cord sacred.
I install nothing else as I treat this as my infuse life line.
I found a few links that may help:
http://www.thegalaxytabforum.com/index.php?/topic/4757-how-to-use-heimdall/
http://forum.xda-developers.com/showthread.php?t=1113195
http://www.glassechidna.com.au/products/heimdall/
All I can say is persistence pays off.
If not, try Odin...if you use Odin, just remember to reinstall samsung kies device drivers and use a different usb port.
gl
Click to expand...
Click to collapse
Thanks very much. I really appreciate your help!
All three links talk about the step where the phone is put into d/l mode and then zadig would find the SAMSUNG USB Composite device for driver installation. That's the step that's not happening for me. If I boot the phone into the download mode warning screen (i.e., before pressing volume up), zadig shows an "Unknown device", and as soon as I press volume up to go into download mode, it disappears from the list altogether.
Tried Odin: doesn't recognize the phone either.
Will keep trying though, and report back if I ever get any where with it.
Having the same exact issue as fishline
I'm glad I could find this thread, because I'm having the exact same trouble as fishline regarding multiple PCs (and multiple USB cables) not allowing me to mount USB storage, and each PC giving me a "USB Device Not Recognized" message. My girlfriend originally had this phone on stock AT&T 2.2 (Froyo). I rooted it, installed CWM Recovery (red), and installed the Serendipity VII rom (I believe this is a GB rom). I had never used Odin or Heimdall, so no rom has ever been "flashed" to this phone. My gf didn't have any trouble with this ROM for some time, including mounting the USB on several occasions.
She then bought an HTC One X, and I got this phone. I immediately upgraded the rom to Dark Knight (Android 4.0.4, ICS?) which screwed up the recovery screen (adding static-y rainbow artifacts and changing the recovery to blue instead of red). To correct the recovery issue, I reverted to AT&T Froyo by using a recovery ZIP. This rom now runs OK, but USB mounting has completely disappeared. I have tried 2 Windows XP desktops and 2 Windows 7 laptops, and 4 different USB cables (including 2 verified data cables) with no success. I have installed Kies, Kies Mini, and just the Samsung drivers by themselves. I even installed Samsung PC Studio due to a suggestion in another thread. No luck at all. Every time I connect the phone to the PC (whether in D/L mode or just from the home screen) I get a "USB Device Not Recognized" message. When I originally flashed Dark Knight, I noticed there was some issue with the naming of the external SD card. I'm wondering, could this issue be related to a bad partition of some kind in the internal memory? And is there any way to fix this without the use of Heimdall or Odin (which I cannot get to work)? I can flash through CWM Recovery just fine (since it's fully fixed now).
If there is still anyone that can give me some suggestions, I would reaIly appreciate it. I can use the phone as is until February, when we're due for another upgrade, but the lack of USB mounting is extremely inconvenient. Thanks to fishline for originally starting this thread, and to everyone that has offered suggestions.
Maybe try this... Good luck !!
http://forum.xda-developers.com/showthread.php?t=1389375
It has worked on various Infuse roms.
Thanks
Pony Express said:
Maybe try this... Good luck !!
http://forum.xda-developers.com/showthread.php?t=1389375
It has worked on various Infuse roms.
Click to expand...
Click to collapse
Thank you for the suggestion. Unfortunately, I am currently on the AT&T stock Froyo rom (rooted with recovery, of course), so I don't think it's allowing me to install the APKs in your link. It says "there was a problem parsing the file" or something similar. I appreciate the help.
I am in desperate need of help .. I am not a noob to flashing roms and rooting, however I have a one-off situation w/ no precedents to my knowledge. I have read these and other forums for days to no avail.
I was flashing Infintium Rom 4.0.4 from MIUI 2.3.6. I followed the steps listed in the post (http://forum.xda-developers.com/showthread.php?t=1661690). After flashing I rebooted and waited however the phone was/is stuck on the Samsung logo and never progressed. I then pulled the battery and attempted to go back to recovery mode to reflash make sure I did flashed correctly. However, upon going back into recovery I was greeted by the below image.
Clockwork Mod is extremely distorted and flat out unusable !! As I read further down it advised to use Heimdall (http://forum.xda-developers.com/showthread.php?t=1331381). I downloaded and attempted to use, however my PC (Which by the way is Windows 7 64-Bit) recognized the phone but the Heimdall software did not. I already had the right drivers for the PC and phone. After a few tries I deleted the files and reapplied them. On the 2nd menu after selecting list devices, on the drop down the option for Samsung USB Composite Device neeever ever appears. I also tried on a different PC that ddnt have the drivers and started brand new. Still, Heimdall ddnt recognize.
I also tried to flash numerous files including but not limited to GTG Ultimate Unbrick via Odin. Again, PC recognized USB connection however program ddnt. At this point, I do not know if it is because the status of Clockwork Mod on my phone, but I know it is not because of the drivers or the USB ports on my PC.
In addition to that, I have just scrapped the idea of flashing or getting in CWM and just wanted to do a hard reset (While phone is off held Vol down and Power, once started released power and contimued to hold Vol down. This should take the phone from the Samsung logo to an alt menu that will give the option to do a factory reset. But again w/ my luck .. that screen neeever appears.
In short I have tried at least 3 different ways and many maaany variations to get the phone back into recovery or into a full boot and had NO success.. Please help and ask as many questions as needed to diagnose and resolve this issue .. Thanx in advance and apologize in advance if posted in the wrong thread.
Are you placing your phone in download mode?
Remove battery and place it back.
Hold vol+ & vol- , and plug in the usb to your phone with the other end already connected to the PC.
Now see if Odin or heimdall recognize your device.
Sent from my sweet & buttery Infuse
andros11 said:
Are you placing your phone in download mode?
Remove battery and place it back.
Hold vol+ & vol- , and plug in the usb to your phone with the other end already connected to the PC.
Now see if Odin or heimdall recognize your device.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
I have done so neither Odin or Heimdall are recognizing it or showing the phone is connected.
ohsirus said:
I have done so neither Odin or Heimdall are recognizing it or showing the phone is connected.
Click to expand...
Click to collapse
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
http://d-h.st/sKF
Then open Odin/Hemdall and plug your phone in again while in Download Mode.
Ryo Misaki said:
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
Then open Odin/Hemdall and plug your phone in again while in Download Mode.
Click to expand...
Click to collapse
I will try again .. Downloaded, rebooting then will go thru the process again .. standby
Ryo Misaki said:
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
Then open Odin/Hemdall and plug your phone in again while in Download Mode.
Click to expand...
Click to collapse
no change .. still shows disconnected
The pic u have posted it shows u need to press the up button to get the download mode (continue)
Sent from my Galaxy Nexus using Tapatalk 2
rkkaranrk said:
The pic u have posted it shows u need to press the up button to get the download mode (continue)
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I just did that to post a pic as an example .. I did go to download mode and not recognizing it
The CWM screen is shot because you don't have gingerbread bootloaders, it will always look like that until to can flash the right ones..
Have you tried different cables, different ports, etc?
Sometimes mine would recognize.. sometimes being plugged in first then running Odin works, sometimes I would have to run Odin and then plug in the phone.. kinda a crapshoot...
Its powered by Jellybeaned AOKP!
drnecropolis said:
The CWM screen is shot because you don't have gingerbread bootloaders, it will always look like that until to can flash the right ones..
Have you tried different cables, different ports, etc?
Sometimes mine would recognize.. sometimes being plugged in first then running Odin works, sometimes I would have to run Odin and then plug in the phone.. kinda a crapshoot...
Its powered by Jellybeaned AOKP!
Click to expand...
Click to collapse
I know I need to get the bootloader and a kernel on it however I cant = ( .. yet .. I have 4 different ports on my PC and have tried them all. i have tried phone on then run programs and programs on 1st then phone on and no new results.
I found this short video and it describes my exact situation .. please watch to futher understand http://www.youtube.com/watch?v=OHLUYckTlug
So u have odin and heimdal both on the same PC and drivers for them if yes then try this.
On the PC/Laptop uninstall all the drivers for samsung or any other phone and follow this.
Go to accessories> system tool> system restore and check the restore point where the drivers for heimdall were installed restore to a previous restore point after restore finishes install the drivers for Infuse and see now Odin recognizes ur phone, It should.
I had the same exact problem, do you have another phone on which you can install the same CWM recovery on? ...Because the clockwork mod recovery still works, it's just that you can't see it. So just flash a new ROM, by going back n forth between phones, clock how many clicks it takes to get to 'choose zip to install' then 'download' on the not messed up phone, then do the same on the screwy one, just keep doing that till u flash the new ROM.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
First off, upon trying to install the Myth 2 ROM on my Ace, everything went well. It all installed perfectly fine like it should. CWM said "Install Complete. Reboot Phone." But, when i clicked Reboot Now, BOOM. Nothing. Official Black screen of doom. Won't do anything now. No Recovery Mode, No Download Mode, No powering on, no nothing. Anyone have any ideas/suggestions on fixing this issue and Resurrecting the dead?
I've searched and searched without any decent results. I did find the Samsung 1-click unbrick, but the phone won't recognize on the computer to run the program.
I also have what they call a USB jig. I'm not too sure this will help out with the Galaxy Ace...But i'm really thinking just about anything i'll try.
I must add though, when i plug it up to my computer, it makes the USB plugged in sound, and on ODIN, it shows it's plugged in and reading. Even says "Added" and "Detected" ODIN gets hung up on "Setting up connection" though and then fails after awhile.
^_^
firefighterwhi said:
First off, upon trying to install the Myth 2 ROM on my Ace, everything went well. It all installed perfectly fine like it should. CWM said "Install Complete. Reboot Phone." But, when i clicked Reboot Now, BOOM. Nothing. Official Black screen of doom. Won't do anything now. No Recovery Mode, No Download Mode, No powering on, no nothing. Anyone have any ideas/suggestions on fixing this issue and Resurrecting the dead?
I've searched and searched without any decent results. I did find the Samsung 1-click unbrick, but the phone won't recognize on the computer to run the program.
I also have what they call a USB jig. I'm not too sure this will help out with the Galaxy Ace...But i'm really thinking just about anything i'll try.
I must add though, when i plug it up to my computer, it makes the USB plugged in sound, and on ODIN, it shows it's plugged in and reading. Even says "Added" and "Detected" ODIN gets hung up on "Setting up connection" though and then fails after awhile.
Click to expand...
Click to collapse
Do you have to the Samsung phone driver (It comes with Kies) installed on your computer? Maybe that's causing the problem with Odin.
Also, I found this see if this works for you. android.pandaapp.com/news/12272012/How_To_Unbrick_The_Samsung_Galaxy_Ace_With_This_All_In_One_GUI_Tool_Using_Cygwin_And_Odin.shtml#.UOHAUuRQXDw
Problem solved
Wound up sending it off and getting a replacement. Claimed I woke up one morning and it wouldn't do anything period. Steven 1, Corr Wireless/Samsung 0.
Sent from my SPH-M820-BST using Tapatalk 2
Hello guys.
My tab (GT-P3100) have been facing some problems lately.
Before this, my tab cannot be started up for some times although it is fully charged.
Last week, I managed to boot it up and then formatted the tab via "restore factory setting" while the tab is on.
Then, I intended to load custom rom into the tab. However all pc, usb, driver, and kies version cannot help me as the tab won't be recognized. It either not showing up entirely or it simply show an error.
Then, I figured that I must format the phone via recovery mode to get the usb working again.
Now is where this problem happened. While formatting, the system message is only stuck at "formatting cache".
It then took a long time until it turned off on its own. This is when the phone cannot be started.
Initially, I can still boot it up until the "samsung galaxy" screen or in download mode. This need to be done by charging it just for a short minute until the battery charging icon shows up. If the battery icon doesn't show up, the phone cannot be started by any means. Then, the boot screen cease to show up but the download mode can still be accessed. Now, the download mode cannot be accessed as well. Lastly, the batter icon won't even show up.
So this lead to my question, what is wrong with my tab. Is is because of corrupted OS, recovery mode. Or perharps faulty battery. Can it be solved by jtag?
kukuru said:
Hello guys.
My tab (GT-P3100) have been facing some problems lately.
Before this, my tab cannot be started up for some times although it is fully charged.
Last week, I managed to boot it up and then formatted the tab via "restore factory setting" while the tab is on.
Then, I intended to load custom rom into the tab. However all pc, usb, driver, and kies version cannot help me as the tab won't be recognized. It either not showing up entirely or it simply show an error.
Then, I figured that I must format the phone via recovery mode to get the usb working again.
Now is where this problem happened. While formatting, the system message is only stuck at "formatting cache".
It then took a long time until it turned off on its own. This is when the phone cannot be started.
Initially, I can still boot it up until the "samsung galaxy" screen or in download mode. This need to be done by charging it just for a short minute until the battery charging icon shows up. If the battery icon doesn't show up, the phone cannot be started by any means. Then, the boot screen cease to show up but the download mode can still be accessed. Now, the download mode cannot be accessed as well. Lastly, the batter icon won't even show up.
So this lead to my question, what is wrong with my tab. Is is because of corrupted OS, recovery mode. Or perharps faulty battery. Can it be solved by jtag?
Click to expand...
Click to collapse
So you aren't able to install any custom recovery neither being able to get your tab detected so I think you should try heidmall
Sent from my GT-P3100 using Tapatalk
---------- Post added at 05:17 AM ---------- Previous post was at 05:15 AM ----------
kukuru said:
Hello guys.
My tab (GT-P3100) have been facing some problems lately.
Before this, my tab cannot be started up for some times although it is fully charged.
Last week, I managed to boot it up and then formatted the tab via "restore factory setting" while the tab is on.
Then, I intended to load custom rom into the tab. However all pc, usb, driver, and kies version cannot help me as the tab won't be recognized. It either not showing up entirely or it simply show an error.
Then, I figured that I must format the phone via recovery mode to get the usb working again.
Now is where this problem happened. While formatting, the system message is only stuck at "formatting cache".
It then took a long time until it turned off on its own. This is when the phone cannot be started.
Initially, I can still boot it up until the "samsung galaxy" screen or in download mode. This need to be done by charging it just for a short minute until the battery charging icon shows up. If the battery icon doesn't show up, the phone cannot be started by any means. Then, the boot screen cease to show up but the download mode can still be accessed. Now, the download mode cannot be accessed as well. Lastly, the batter icon won't even show up.
So this lead to my question, what is wrong with my tab. Is is because of corrupted OS, recovery mode. Or perharps faulty battery. Can it be solved by jtag?
Click to expand...
Click to collapse
Have you tried restoring to stock rom or installing cwm?
Sent from my GT-P3100 using Tapatalk
shsagnik said:
So you aren't able to install any custom recovery neither being able to get your tab detected so I think you should try heidmall
Sent from my GT-P3100 using Tapatalk
---------- Post added at 05:17 AM ---------- Previous post was at 05:15 AM ----------
Have you tried restoring to stock rom or installing cwm?
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Hello
I have downloaded the heimdall zip. However, the zadig.exe cannot find any samsung devices. I have followed the instruction where I have to uninstall kies and other usb drivers. but still no luck.
My ROM is still stock rom. And I can't install cwm because my tab can never be discovered..
kukuru said:
Hello
I have downloaded the heimdall zip. However, the zadig.exe cannot find any samsung devices. I have followed the instruction where I have to uninstall kies and other usb drivers. but still no luck.
My ROM is still stock rom. And I can't install cwm because my tab can never be discovered..
Click to expand...
Click to collapse
Try sideloading Samsung USB drivers using uh what's it's called uh yeah go to my computer, right click, mange, device manager, connect your device and see if it appears and try side loading drivers, just Google it on how to do it and tell me if it works
Sent from my GT-P3100 using Tapatalk
shsagnik said:
Try sideloading Samsung USB drivers using uh what's it's called uh yeah go to my computer, right click, mange, device manager, connect your device and see if it appears and try side loading drivers, just Google it on how to do it and tell me if it works
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Tried and failed. Thanks for your suggestion though. I'm gonna try third usb cord after this. Will report later.
it is time for taking it to the service centre
kukuru said:
Hello guys.
My tab (GT-P3100) have been facing some problems lately.
Before this, my tab cannot be started up for some times although it is fully charged.
Last week, I managed to boot it up and then formatted the tab via "restore factory setting" while the tab is on.
Then, I intended to load custom rom into the tab. However all pc, usb, driver, and kies version cannot help me as the tab won't be recognized. It either not showing up entirely or it simply show an error.
Then, I figured that I must format the phone via recovery mode to get the usb working again.
Now is where this problem happened. While formatting, the system message is only stuck at "formatting cache".
It then took a long time until it turned off on its own. This is when the phone cannot be started.
Initially, I can still boot it up until the "samsung galaxy" screen or in download mode. This need to be done by charging it just for a short minute until the battery charging icon shows up. If the battery icon doesn't show up, the phone cannot be started by any means. Then, the boot screen cease to show up but the download mode can still be accessed. Now, the download mode cannot be accessed as well. Lastly, the batter icon won't even show up.
So this lead to my question, what is wrong with my tab. Is is because of corrupted OS, recovery mode. Or perharps faulty battery. Can it be solved by jtag?
Click to expand...
Click to collapse
i think this must be the fault in the os..
if you are lucky to go to the download mode i think you can solve it using odin.
go to sam mobile site and download the firmware for your device.
then install odin app in your pc
(this is my 5th post so i cannot add links)
now while in download mode connect your device to pc.
now open odin in your pc.
make sure you dont uncheck/check anything new in the app
now select PDA and browse the firmware you downloaded and click start.
this may take some time, and your device might reboot several times.
now once you are done there are slight chances for getting stuck in the bootlogo.
in this case you can go to recovery and do a factory reset. then you are all set to go.
NOTE:Charge your device fully before doing this process.
I think this might help you. if still any problem occurs -please notice me.
Zte blade l said:
i think this must be the fault in the os..
if you are lucky to go to the download mode i think you can solve it using odin.
go to sam mobile site and download the firmware for your device.
then install odin app in your pc
(this is my 5th post so i cannot add links)
now while in download mode connect your device to pc.
now open odin in your pc.
make sure you dont uncheck/check anything new in the app
now select PDA and browse the firmware you downloaded and click start.
this may take some time, and your device might reboot several times.
now once you are done there are slight chances for getting stuck in the bootlogo.
in this case you can go to recovery and do a factory reset. then you are all set to go.
NOTE:Charge your device fully before doing this process.
I think this might help you. if still any problem occurs -please notice me.
Click to expand...
Click to collapse
Thanks for taking your time to answer this. Actually, the tab cannot be detected on every pc I have used (3 different pc up to now). Even with drivers and Kies. Do you think it's a problem on the charger port?
I finally found the problem!!
Zte blade l said:
i think this must be the fault in the os..
if you are lucky to go to the download mode i think you can solve it using odin.
go to sam mobile site and download the firmware for your device.
then install odin app in your pc
(this is my 5th post so i cannot add links)
now while in download mode connect your device to pc.
now open odin in your pc.
make sure you dont uncheck/check anything new in the app
now select PDA and browse the firmware you downloaded and click start.
this may take some time, and your device might reboot several times.
now once you are done there are slight chances for getting stuck in the bootlogo.
in this case you can go to recovery and do a factory reset. then you are all set to go.
NOTE:Charge your device fully before doing this process.
I think this might help you. if still any problem occurs -please notice me.
Click to expand...
Click to collapse
After extensive research for weeks, I finally knew the problem! Its actually an emmc brick bug!
The symptoms are all the same. My tab started to brick after I formatted in recovery. Causing no booting, and only download mode and cannot be detected by PC. The funny thing is, the emmc chip have been replaced before by the previous owner I bought the tab from. ONLY FOR THE CHIP TO BE AN INSANE CHIP AGAIN.
Remember folks, the symptoms are:
Cannot boot, sometime boot only on logo. very rare though.
Can only access download mode but cannot be detected by PC. Even if it can, the odin flash will stuck half way.
Can be charged.
How to solve:
I don't know ****