chimeraVsskyrocket wont install - AT&T Samsung Galaxy S II Skyrocket SGH-I727

i flash my phone alot. im not sure why im having this issue. i couldnt get cm9 to install with touch recovery so i flashed a nontouch 5.x like it said to do. i got cm9 installed with it, but when i boot back into recovery the aroma installer gives me the choices, but in one second it says its done. i reboot and it still say rc2. tried just wiping cache and dalvik, then tried full wipe. same thing. anyone know what im doing wrong? i really love this rom and want it to run. :crying:

jasonsamms666 said:
i flash my phone alot. im not sure why im having this issue. i couldnt get cm9 to install with touch recovery so i flashed a nontouch 5.x like it said to do. i got cm9 installed with it, but when i boot back into recovery the aroma installer gives me the choices, but in one second it says its done. i reboot and it still say rc2. tried just wiping cache and dalvik, then tried full wipe. same thing. anyone know what im doing wrong? i really love this rom and want it to run. :crying:
Click to expand...
Click to collapse
Umm, read the thread? Armygunner posted that the updater script had a flaw, he is uploading a new build.

I got it thankyou
Sent from my SAMSUNG-SGH-I727 using xda premium

Related

[Q] Desire Gingerbread 3.14..405.1 | A2SD Base official HTC RUU |Android 2.3.3

Hi,
I can not this ROM to work. I have done a clean wipe. It loads up the first time but on the first reboot reboot it gets stuck at the white htc screen.
If I wipe cache and dalvik cache it works once again but still won't get past a reboot.
Any ideas?
Thanks
mcp1999 said:
Hi,
I can not this ROM to work. I have done a clean wipe. It loads up the first time but on the first reboot reboot it gets stuck at the white htc screen.
If I wipe cache and dalvik cache it works once again but still won't get past a reboot.
Any ideas?
Thanks
Click to expand...
Click to collapse
Try downloading the ROM again. Sounds like a bad package
Good luck!
juzz86 said:
Try downloading the ROM again. Sounds like a bad package
Good luck!
Click to expand...
Click to collapse
I already tried that. In fact I downloaded and tried the other ROM at that link (which is the same but with a couple of system apps removed) which gave me exactly the same problem.
In fact, now I think about it. I once tried an Oxygen ROM a few months ago that I believe also worked on the first boot but wouldn't come back on after a restart.
Any more ideas?!
mcp1999 said:
I already tried that. In fact I downloaded and tried the other ROM at that link (which is the same but with a couple of system apps removed) which gave me exactly the same problem.
In fact, now I think about it. I once tried an Oxygen ROM a few months ago that I believe also worked on the first boot but wouldn't come back on after a restart.
Any more ideas?!
Click to expand...
Click to collapse
Hmm. I wonder if it's your Recovery. What version CWM are you running? The latest for your phone?
I ended up giving up on this ROM and installed this stock rooted ROM
http://forum.xda-developers.com/showthread.php?t=1200261&page=1 which has been extremely stable.

CM10 Alpha 3 Problem?

Hello,
I was running the CM10 Alpha 2 for my GSII. Alpha 3 came out so I decided to update. I installed the newest CWM and the alpha 3 package, gapps and darkside wipe.
When installing I had no problems that I noticed. Everything said it worked fine. However, once rebooting the phone after darkside wipe finished, I couldn't boot up my phone. I can get past the Samsung screen, but I don't even make it to the CM animation boot screen.
I decided to pull the battery after waiting a while and go back into recovery. I did this and decided to restore my backup. My phone is stuck on "Restoring .android_secure" right now and will not work.
I can use Odin to flash back to ICS and how to came but I'm wondering why it didn't work? I know I did the procedure right, as I did it when flashing CM10 alpha 1, 1a and 2. I read about needing the latest CWM for it so I got that, too. A bit of a weird issue that I'd post in the CM10 thread if I had over ten posts.
Thanks in advance to those who can help!
Droid111 said:
Hello,
I was running the CM10 Alpha 2 for my GSII. Alpha 3 came out so I decided to update. I installed the newest CWM and the alpha 3 package, gapps and darkside wipe.
Click to expand...
Click to collapse
I followed basically the same pattern and didn't have an issue, aside from the fact that I didn't Darkside wipe (if you are using the latest clockwork touch I don't think it's necessary anymore). I also flashed the instigator kernel (6.2.1) but that was after I rebooted without issue.
Sidenote, the instigator 6.2.1 seems to possibly have some overheating trouble, so I am running the Darkside Hercules kernel for the moment, and it seems to be working well.
Phizban said:
I followed basically the same pattern and didn't have an issue, aside from the fact that I didn't Darkside wipe (if you are using the latest clockwork touch I don't think it's necessary anymore). I also flashed the instigator kernel (6.2.1) but that was after I rebooted without issue.
Sidenote, the instigator 6.2.1 seems to possibly have some overheating trouble, so I am running the Darkside Hercules kernel for the moment, and it seems to be working well.
Click to expand...
Click to collapse
Yeah, reading the thread it seems like a pretty rare problem. Somebody actually posted something similar yesterday that I missed and nobody really knew. I wasn't sure if I should Darkside wipe or not so I chose to anyways. I haven't tried flashing a new kernal but as I said I can't even get to the boot animation.
Droid111 said:
Yeah, reading the thread it seems like a pretty rare problem. Somebody actually posted something similar yesterday that I missed and nobody really knew. I wasn't sure if I should Darkside wipe or not so I chose to anyways. I haven't tried flashing a new kernal but as I said I can't even get to the boot animation.
Click to expand...
Click to collapse
I would stay away from the darkside wipe, it has been reported through many threads that it can sometimes lead to problems when installing a rom. Your best bet is to just wipe data, format system, wipe dalvik cache, either format /cache or use Darksidewipe.cache not the darkside wipe that's wipes everything. Then install rom and gapps. Reboot phone and let it sit for 5 to 10 minutes, (i usually let it sit 10). From there you can decide if you want to flash one of the two available kernels, results may very with the two.
mjwhirly said:
I would stay away from the darkside wipe, it has been reported through many threads that it can sometimes lead to problems when installing a rom. Your best bet is to just wipe data, format system, wipe dalvik cache, either format /cache or use Darksidewipe.cache not the darkside wipe that's wipes everything. Then install rom and gapps. Reboot phone and let it sit for 5 to 10 minutes, (i usually let it sit 10). From there you can decide if you want to flash one of the two available kernels, results may very with the two.
Click to expand...
Click to collapse
Thanks for the help. I'm going to try it within the next few days. Right now I have SKY-ICS going fine but I'll definitely try that.
What do the different kernels do?
Droid111 said:
Hello,
I was running the CM10 Alpha 2 for my GSII. Alpha 3 came out so I decided to update. I installed the newest CWM and the alpha 3 package, gapps and darkside wipe.
When installing I had no problems that I noticed. Everything said it worked fine. However, once rebooting the phone after darkside wipe finished, I couldn't boot up my phone. I can get past the Samsung screen, but I don't even make it to the CM animation boot screen.
I decided to pull the battery after waiting a while and go back into recovery. I did this and decided to restore my backup. My phone is stuck on "Restoring .android_secure" right now and will not work.
I can use Odin to flash back to ICS and how to came but I'm wondering why it didn't work? I know I did the procedure right, as I did it when flashing CM10 alpha 1, 1a and 2. I read about needing the latest CWM for it so I got that, too. A bit of a weird issue that I'd post in the CM10 thread if I had over ten posts.
Thanks in advance to those who can help!
Click to expand...
Click to collapse
I used TWRP and flashed over CM9 with no problems. Did it as an upgrade. Wipe system> install CM10> install gapps> Wipe cache
Several people have reported that TWRP worked for them.

[Q] Stuck on bootscreen after flashing [JB]Unoffical MIUI 2.9.14 Skyrocket[PORT]

Hello Pros! First post, semi-noob here.
I tried flashing the newest [JB][CM10Based]Unoffical MIUI 2.9.14 Skyrocket 9/14/12[PORT] today. I followed all instructions; I wiped wiped wiped, factory and Dalvik, and flashed the kernel.
But I am always stuck on the MIUI bootscreen, and can never fully load up the ROM. I've tried wiping and re-flashing several times, to no avail. I have not had any problems flashing roms before this. Any help or ideas of what causes this would be greatly appreciated.
Thanks so much!
shentheory said:
Hello Pros! First post, semi-noob here.
I tried flashing the newest [JB][CM10Based]Unoffical MIUI 2.9.14 Skyrocket 9/14/12[PORT] today. I followed all instructions; I wiped wiped wiped, factory and Dalvik, and flashed the kernel.
But I am always stuck on the MIUI bootscreen, and can never fully load up the ROM. I've tried wiping and re-flashing several times, to no avail. I have not had any problems flashing roms before this. Any help or ideas of what causes this would be greatly appreciated.
Thanks so much!
Click to expand...
Click to collapse
Couple things.... did u format data/system? Also what recovery are u using?
Deliberate said:
Couple things.... did u format data/system? Also what recovery are u using?
Click to expand...
Click to collapse
Yes, I formatted both system and data. And I'm using the recovery that was recommended in the rom thread, Sk8er's Cwm v13.
Thanks for your reply!
shentheory said:
Yes, I formatted both system and data. And I'm using the recovery that was recommended in the rom thread, Sk8er's Cwm v13.
Thanks for your reply!
Click to expand...
Click to collapse
Try reflashing. But when u get into recovery go to extras/darkside tool. And click on the super wipe(idr what's its called but there's only two options.) When that's done factory reset format data/system 3x if u want.( Couldn't hurt) then flash ROM! All should be good... if not keep this thread open. Lol and well try something else. But hopefully that works. Good luck!
Deliberate said:
Try reflashing. But when u get into recovery go to extras/darkside tool. And click on the super wipe(idr what's its called but there's only two options.) When that's done factory reset format data/system 3x if u want.( Couldn't hurt) then flash ROM! All should be good... if not keep this thread open. Lol and well try something else. But hopefully that works. Good luck!
Click to expand...
Click to collapse
Thanks for the steps, but unfortunately I'm still staring at this dang MIUI bootscreen...:crying:
I ran the darkside superwipe, factory reset 3x, and formatted both data/system 3x, flashed the rom, and I'm still staring at this dang MIUI bootscreen... waaa waaaaaaa, what's the DEALIO?
shentheory said:
Thanks for the steps, but unfortunately I'm still staring at this dang MIUI bootscreen...:crying:
I ran the darkside superwipe, factory reset 3x, and formatted both data/system 3x, flashed the rom, and I'm still staring at this dang MIUI bootscreen... waaa waaaaaaa, what's the DEALIO?
Click to expand...
Click to collapse
Really? Damn. Are u on the latest recovery? If not try flashing the newest. Then do the steps again in my last post. Can't believe your having all these troubles!
Oh also u could try fixing permissions. After doing all the wipes and after flashing. Go to dark side tools again and do the cashe wipe! Then go back to advanced and fix permissions again.
Can you boot into recovery or not? If you can, just flash the rom. If you can't, yank the battery, replace it. Then, hold down both volume buttons, the press the power button, release all the buttons, you should be able to get into recovery.
Deliberate said:
Really? Damn. Are u on the latest recovery? If not try flashing the newest. Then do the steps again in my last post. Can't believe your having all these troubles!
Oh also u could try fixing permissions. After doing all the wipes and after flashing. Go to dark side tools again and do the cashe wipe! Then go back to advanced and fix permissions again.
Click to expand...
Click to collapse
Wow, still stuck on the boot screen even after the darkside cache wipe. I flashed CWMR Touch v6.0.1.3 by sk8erwitskil which is the newest CWM recovery as far as I believe, and the recommended recovery for this ROM. I EVEN flashed TWRP 2.2 just for the heck of it and flashed MIUI with that and still the same result; stuck on bootscreen. So I'm pretty sure it's not the recovery.
I did a darkside superwipe, and a darkside cache wipe, along with factory reset & format data/system 3x. The rom installs in recovery just fine. It's just once i reboot, i get the MIUI splash loading screen indefinitely. I'm not sure what could be causing this since I do all the important wipes (plus the darkside wipes now) each time. I think I have BAD LUCK!
You'll have to use odin, and reroot your phone.
Have you checked the MD5 of the ROM? If it's a bad DL it could flash just enough of it to loop you.
shentheory said:
Wow, still stuck on the boot screen even after the darkside cache wipe. I flashed CWMR Touch v6.0.1.3 by sk8erwitskil which is the newest CWM recovery as far as I believe, and the recommended recovery for this ROM. I EVEN flashed TWRP 2.2 just for the heck of it and flashed MIUI with that and still the same result; stuck on bootscreen. So I'm pretty sure it's not the recovery.
I did a darkside superwipe, and a darkside cache wipe, along with factory reset & format data/system 3x. The rom installs in recovery just fine. It's just once i reboot, i get the MIUI splash loading screen indefinitely. I'm not sure what could be causing this since I do all the important wipes (plus the darkside wipes now) each time. I think I have BAD LUCK!
Click to expand...
Click to collapse
I had the same problem, but while my phone was stuck on the MIUI boot screen i pulled the batter, got into recovery again and simply did a factory data reset just once and then it booted up, but my issue is that i get no data at all no mater what version of MIUI I try to flash.
mimart7 said:
You'll have to use odin, and reroot your phone.
Click to expand...
Click to collapse
Even if my stock rom is already rooted? I'm not against trying it, I'm just curious to how that could affect it. Thanks for your help!
hechoen said:
Have you checked the MD5 of the ROM? If it's a bad DL it could flash just enough of it to loop you.
Click to expand...
Click to collapse
I will do this and update when I do, Thanks for your help!
hechoen said:
Have you checked the MD5 of the ROM? If it's a bad DL it could flash just enough of it to loop you.
Click to expand...
Click to collapse
Ya I agree try downloading it again. Check the md5 and flash that ROM again. If it doesn't work your gonna have to Odin!
There were a lot of complaints of boot loops when flashing, so I pulled the DL link. I actually stopped using miui and moved back to CM or AOKP, depending on which one is most stable at the moment. Every once in a while I give miui a try, but I never stick with it. If you want miui, I suggest you follow Lithium's thread. His version is the officially supported miui rom.
I can confirm heres what i did to fix i had the boot loop.. all i did was run DARKSIDE Superwipe x2 Times. Then i installed MIUI Rom. Then i Factory Reset. Try booting wait a little bit. If still not going threw remove battery and boot to recovery and factory reset one more time then reboot. So once again.
1. DARKSIDE SUPERWIPE x2++ 2. Install MIUI Rom. 3. Factory Reset. 4. Boot. 5. (If still looping) Remove battery Then recovery. and Factory Reset and boot again. Your welcome
Can we move this to q and a?
Sent from my XT894 using Tapatalk 2

Unsolved Problem

Hi,
I have a goophnoe i5c MD6575 and ive been for like 3 days trying to install a rom, any iphone a-like rom like manuxo or cafrix but i just cant! I've already rooted the phone (i think im not that good on this stuff), i alredy tried flashing even tho i have no idea whats that and it always get an error... When i try to install the rom, first of all there is no advanced and Wipe Dalvik Cache option, there is only the Wipe Cache partition and Wipe data/factory reset. If i do both and try to install the rom by going to the folder and update by clicking the zip it gives a E:Signature error. The calfix or manuxo rom gives that signature error, ive already asked ALOT of people to help me with this and no1 does... Im actually trying everything, i think i already rooted the phone cause i have SuperSU on it already, but still i have no Advanced option in the recovery screen. I dont know what else to tell you. Please guys help me i dont have anyone to turn to...
Thank you
HeavenKinder said:
Hi,
I have a goophnoe i5c MD6575 and ive been for like 3 days trying to install a rom, any iphone a-like rom like manuxo or cafrix but i just cant! I've already rooted the phone (i think im not that good on this stuff), i alredy tried flashing even tho i have no idea whats that and it always get an error... When i try to install the rom, first of all there is no advanced and Wipe Dalvik Cache option, there is only the Wipe Cache partition and Wipe data/factory reset. If i do both and try to install the rom by going to the folder and update by clicking the zip it gives a E:Signature error. The calfix or manuxo rom gives that signature error, ive already asked ALOT of people to help me with this and no1 does... Im actually trying everything, i think i already rooted the phone cause i have SuperSU on it already, but still i have no Advanced option in the recovery screen. I dont know what else to tell you. Please guys help me i dont have anyone to turn to...
Thank you
Click to expand...
Click to collapse
i think your custom recovery might be out of date then if it does not have advanced and wipe dalvik. what version is it?
Idk where to see that, but when i open it, it says on top:^
Android system recovery <3e>
HeavenKinder said:
Idk where to see that, but when i open it, it says on top:^
Android system recovery <3e>
Click to expand...
Click to collapse
that is stock recovery, cant flash roms with stock recovery theres your problem. gotta get a custom recvery such as clockworkmod or amon-ra, idk if amon-ra is on the goophone but clockwork is very popular.
Trozzul said:
i think your custom recovery might be out of date then if it does not have advanced and wipe dalvik. what version is it?
Click to expand...
Click to collapse
Trozzul said:
that is stock recovery, cant flash roms with stock recovery theres your problem. gotta get a custom recvery such as clockworkmod or amon-ra, idk if amon-ra is on the goophone but clockwork is very popular.
Click to expand...
Click to collapse
Is there any official download links or something?
Or how can i put it on the goophone?
Can some1 help me out? aparently i have to install CWM recovery how do i do that? where do i get it and how do i install it
HeavenKinder said:
Can some1 help me out? aparently i have to install CWM recovery how do i do that? where do i get it and how do i install it
Click to expand...
Click to collapse
you would have to google it i have no idea how the goophone works. it has to be for your specifically.
i've already search the CWM recovery for goophone, i saw alot of post here for it and how to install roms on this forum but none of em mention the need for CWM, its like they hope we already have it, so i cant find it... thats the only reason i wanted some help, i wanted help from the people that have already installed/made roms for goophones.
Ok i already tried to flash like 4 recovery images with mobileuncle tools and it just bricks the damn phone.... What recovery image will work so i can install a rom
Now, in the Mobileuncle tools i tried to use the Update tool and use the test update and it bricked it anyway... What might be causing this?
Bump
bump
bump
please dont bump your own threads within a few hours..... i can understand your frustrated.

[Q] First boot taking forever .

Hi ,guys .
So my problem is the first boot (on my p3110 )takes an eternity , whatever I'm trying to flash it wouldn't succesfully have the first boot .
I've tried omni,slimkat and CM but nothing works .
Dumb I was ,in my blind tries, I've deleted my backups and now the only place i can flash is my microSD card.
Help please , I'm really stuck . :crying:
TheHelplessGuy said:
Hi ,guys .
So my problem is the first boot (on my p3110 )takes an eternity , whatever I'm trying to flash it wouldn't succesfully have the first boot .
I've tried omni,slimkat and CM but nothing works .
Dumb I was ,in my blind tries, I've deleted my backups and now the only place i can flash is my microSD card.
Help please , I'm really stuck . :crying:
Click to expand...
Click to collapse
The first boot always takes longer as it is setting up, but no longer than ~5 minutes.
Anyway... If you've waited and it is boot looping, try these steps:
Make sure your recovery is up to date.
Wipe system, data, cache, and dalvik cache.
Flash ROM, gapps, and any addons
Wipe cache and dalvik
Reboot. After first reboot is complete and on setup screen, wait 5 minutes and reboot into recovery.
Wipe cache and dalvik again. Reboot
This reboot could also take ~5 minutes, but the others shouldn't as long as you don't wipe cache and dalvik.
You should see an "Android is Upgrading" screen. After this is done, complete setup and you should be good to go.
Sent from my SGH-T989
The same
jrc2 said:
The first boot always takes longer as it is setting up, but no longer than ~5 minutes.
Anyway... If you've waited and it is boot looping, try these steps:
Make sure your recovery is up to date.
Wipe system, data, cache, and dalvik cache.
Flash ROM, gapps, and any addons
Wipe cache and dalvik
Reboot. After first reboot is complete and on setup screen, wait 5 minutes and reboot into recovery.
Wipe cache and dalvik again. Reboot
This reboot could also take ~5 minutes, but the others shouldn't as long as you don't wipe cache and dalvik.
You should see an "Android is Upgrading" screen. After this is done, complete setup and you should be good to go.
Sent from my SGH-T989
Click to expand...
Click to collapse
The same loading image .(You know ,when you first boot something it appears the custom flash's logo) . what can i do ?
TheHelplessGuy said:
The same loading image .(You know ,when you first boot something it appears the custom flash's logo) . what can i do ?
Click to expand...
Click to collapse
How long have you tried waiting? Which room door you flash on which device?
Sent from my SGH-T989
jrc2 said:
How long have you tried waiting? Which room door you flash on which device?
Sent from my SGH-T989
Click to expand...
Click to collapse
I've waited more than usual 5-10 mins ,even 6 hours ,but nothing, ,I'm curently trying to flash slimkat 4.4.4 but i've tried omni ,CM all kitkat .
What is your advice ?
TheHelplessGuy said:
I've waited more than usual 5-10 mins ,even 6 hours ,but nothing, ,I'm curently trying to flash slimkat 4.4.4 but i've tried omni ,CM all kitkat .
What is your advice ?
Click to expand...
Click to collapse
What version of unroofed TouchWiz were you running before rooting and flashing?
Sent from my SGH-T989
jrc2 said:
What version of unroofed TouchWiz were you running before rooting and flashing?
Sent from my SGH-T989
Click to expand...
Click to collapse
The one with Android 4.1 my guess is Nature UX
TheHelplessGuy said:
The one with Android 4.1 my guess is Nature UX
Click to expand...
Click to collapse
Then idk what the problem is. You were on jelly bean already so that isn't a problem.
Sent from my SGH-T989
jrc2 said:
Then idk what the problem is. You were on jelly bean already so that isn't a problem.
Sent from my SGH-T989
Click to expand...
Click to collapse
What do you suggest ?
TheHelplessGuy said:
What do you suggest ?
Click to expand...
Click to collapse
I don't know, sadly. Maybe someone else will know and we'll both learn something.
Sent from my SGH-T989
Back to stock rom for now, prepare (charge until full).
Re-root, then reboot to recovery to try again flashing the rom.
Always format /system, /cache, /data/media first when installing different roms. Good luck
150208 said:
Back to stock rom for now, prepare (charge until full).
Re-root, then reboot to recovery to try again flashing the rom.
Always format /system, /cache, /data/media first when installing different roms. Good luck
Click to expand...
Click to collapse
I did exactly as you said but nothing happened .
1. It's a problem that i install zips from my external storage ?
2.Do you know where i can find a nandroid backup to download ?
3.What do you suggest for my issue ?
TheHelplessGuy said:
I did exactly as you said but nothing happened .
1. It's a problem that i install zips from my external storage ?
2.Do you know where i can find a nandroid backup to download ?
3.What do you suggest for my issue ?
Click to expand...
Click to collapse
Stock rom is working fine? Is root working on stock?
Did you get any errors while flashing costom roms?
I remember a folk here got a same problem as you, and i think it's not resolved yet..
Maybe you and him have a "special" devices.
Don't worry, it's not a problem with your ext-sd because i use it all the time. and if it was ext-sd problem, you'll get an error while flashing.
I suggest messages devs in developement section, maybe they can figure out what is wrong.
And of course i think it's not safe to restore others nandroid backup, so don't mind find it.
God speed, wish I can help you more :angel:
150208 said:
Stock rom is working fine? Is root working on stock?
Did you get any errors while flashing costom roms?
I remember a folk here got a same problem as you, and i think it's not resolved yet..
Maybe you and him have a "special" devices.
Don't worry, it's not a problem with your ext-sd because i use it all the time. and if it was ext-sd problem, you'll get an error while flashing.
I suggest messages devs in developement section, maybe they can figure out what is wrong.
And of course i think it's not safe to restore others nandroid backup, so don't mind find it.
God speed, wish I can help you more :angel:
Click to expand...
Click to collapse
Sadly my stock rom is gone.
So yesterday when I've rerooted whit your link I've received two errors :
- SOKP and when I've flash it something like poped up : E:Cannot write to sd card clockworkmod recovery etc.
- CM 11 :
Root Access Possibly Lost Fix?
THIS CANNOT BE UNDONE
1. YES fix root (/system/xbin/su)
2. NO do not fix
TheHelplessGuy said:
Sadly my stock rom is gone.
So yesterday when I've rerooted whit your link I've received two errors :
- SOKP and when I've flash it something like poped up : E:Cannot write to sd card clockworkmod recovery etc.
- CM 11 :
Root Access Possibly Lost Fix?
THIS CANNOT BE UNDONE
1. YES fix root (/system/xbin/su)
2. NO do not fix
Click to expand...
Click to collapse
Like I said earlier, you should have flashing stock rom first to remove root via odin/hemidall.. you can find it at sammobile,com
then re-root with link i gave earlier again via odin/hemidall, and format in recovery like i said earlier. no wonder you still fail..
you should have philz touch recovery instead cwm if you succeed.
150208 said:
Like I said earlier, you should have flashing stock rom first to remove root via odin/hemidall.. you can find it at sammobile,com
then re-root with link i gave earlier again via odin/hemidall, and format in recovery like i said earlier. no wonder you still fail..
you should have philz touch recovery instead cwm if you succeed.
Click to expand...
Click to collapse
re-rooted as you said still the same loading screen , you can give me a link to the part of the forum where I can speak with developers as you said few comments ago

Categories

Resources