Database Info

Install MIUIv4 on i9003

The Rom seem mature and stable only a few minor things do not work.
I search howto to install MIUIv4 on i9003 from scratch.... help me please...

Its simple....
Bro its very simple-
1-Download miui test key 4 from development section...
http://www.mediafire.com/?mhnh8oa881axg5k
2-Be on xxkpq or any xxkpq custom rom version..
3-Copy the miui file to ur external sd..
4-Go to recovery mode......(when phone is off press combinations of keys volume up+centre bottom button and the power button)
5-Flash it...(install zip from sd card then choose zip and select where you have copied the file........
6-reeboot
and if u r on froyo--then update
http://forum.xda-developers.com/showthread.php?t=1133787

flash with odin kpe-kpq-uc kernel v7 n0n oc
reboot in recovery and wipe data-cache dalvick cache- install zip to sdcard-miuiv4
reboot system.
you have new miui.

So i have to flash zip file on 2.3.6 firmware....?? In the miuiv4 wifi, gps calls and sms working?? The italian language pack??

Wait for a wile...
Bro yes u have to flash xxkpq............but u should wait for a while ...its not a full working version......ex-camera not working.......very little hangs......not able to play hd 720p videos.....u can get this all by just flashing xxkpq and then us kernal v8 oc to 1.2 ghz...u can get it in development section....

[Q] Please help about updating my phone

Please i need your help about :
my phone is samsung galaxy i9003
my software now is jelly bean 4.1.2
I need to update my phoen to jb 4.2.2
can any one help me ??
i posted this thread in Q and A and no one help me
Please i need help
all i need to update my phone from android 4.1.2 to 4.2.2
please help me
Thanks ,,,

Hey bro follow this to make clean install (but this will wipe your data)
DO IT AT YOUR OWN RISK
1- make sure you have kies installed or just install galaxy sl usb drivers (thanks to Zulfauzi).
2-Download odin3 v1.85 from the attachments.
3-Download full DDLF2 from here (thanks to (thanks to sgatechwork).
4. Run Odin3 v1.85.
5. Check Re-Partition, Auto Reboot and F. Reset Time.
6. Click PIT button and select this file: latona_20110114.pit
7. Set it to download mode : Press Volume down + OK first, then hold Power button.
8. Connect USB cable and the program will detect the phone's Com number.
9. Click Start button to download the PIT file to phone.
10. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir].
11. Click PDA button and select this file: CODE_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
12. Click PHONE button and select this file: MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5.
13. Click BOOTLOADER button and select this file: APBOOT_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
14. Click CSC button and select this file: GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5.
15: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!].
16. Click Start button to flash these files to phone.
17. Do not touch anything till you see PASS on the program window.
18. Factory reset.
19. [To fix issues that pertain] Reflash from steps 9 -15 again, No need of latona at this point.
thanks to Misledz for the instructions (original thread here)(I only edited file names).
Now download any Jb 4.2.2 rom and carefully follow the OP instructions.
I suggest CM10.1 A8 by dhiru1602 (thanks to him), rom is verry stable and smooth.
if I helped you please hit the "thanks" button
Best regards

ASMI1 said:
Hey bro follow this to make clean install (but this will wipe your data)
DO IT AT YOUR OWN RISK
1- make sure you have kies installed or just install galaxy sl usb drivers (thanks to Zulfauzi).
2-Download odin3 v1.85 from the attachments.
3-Download full DDLF2 from here (thanks to (thanks to sgatechwork).
4. Run Odin3 v1.85.
5. Check Re-Partition, Auto Reboot and F. Reset Time.
6. Click PIT button and select this file: latona_20110114.pit
7. Set it to download mode : Press Volume down + OK first, then hold Power button.
8. Connect USB cable and the program will detect the phone's Com number.
9. Click Start button to download the PIT file to phone.
10. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir].
11. Click PDA button and select this file: CODE_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
12. Click PHONE button and select this file: MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5.
13. Click BOOTLOADER button and select this file: APBOOT_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5.
14. Click CSC button and select this file: GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5.
15: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!].
16. Click Start button to flash these files to phone.
17. Do not touch anything till you see PASS on the program window.
18. Factory reset.
19. [To fix issues that pertain] Reflash from steps 9 -15 again, No need of latona at this point.
thanks to Misledz for the instructions (original thread here)(I only edited file names).
Now download any Jb 4.2.2 rom and carefully follow the OP instructions.
I suggest CM10.1 A8 by dhiru1602 (thanks to him), rom is verry stable and smooth.
if I helped you please hit the "thanks" button
Best regards
Click to expand...
Click to collapse
Thanks for your reply
but there's another method about updating by CWM RECOVERY
do you know how this method done ?

dr_amjad said:
Thanks for your reply
but there's another method about updating by CWM RECOVERY
do you know how this method done ?
Click to expand...
Click to collapse
yes there is another way if you have recovery installed. Just tell us what ROM you are on (your 4.1.2 ROM name) and try to find out if you have CWM recovery(volume up+home+power). Let us know this this then we will proceed.
@ASMI1 :He is on a 4.1.2 OS means he have a custom ROM and re-partioning is not mandatory because he is comming for a CM10 base.

mustafahussain said:
yes there is another way if you have recovery installed. Just tell us what ROM you are on (your 4.1.2 ROM name) and try to find out if you have CWM recovery(volume up+home+power). Let us know this this then we will proceed.
@ASMI1 :He is on a 4.1.2 OS means he have a custom ROM and re-partioning is not mandatory because he is comming for a CM10 base.
Click to expand...
Click to collapse
Thank you very much mr mustafa
i download the ROM from video on youtube and this is link of video
http://www.youtube.com/watch?v=VqypSD3JBJk
It's CM 10 Alpha 3
And in the video there's a download link of the Rom and this is the link which in the video
http://forum.xda-developers.com/showthread.php?t=1868074
by the way : when i click power key there is an option called : Reboot
when i click on Reboot tell me that i can Reboot my phone and recovery and download mode
Thanks for your reply

If you like the jelly bean 4.1.2 (CM10) by Dhiru, surely you'll like the CM10.1 version.
It is in here. Review it for more details.
You will need the latest CM10.1 in Dhiru1602's downloads and this gapps..
Download both on the SD card. Then, basically this will be the instructions to install it:
Code:
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
PD: By the way, you can use the Reboot -> Reboot to recovery option you've mentioned.

Drizzt_Kueh said:
If you like the jelly bean 4.1.2 (CM10) by Dhiru, surely you'll like the CM10.1 version.
It is in here. Review it for more details.
You will need the latest CM10.1 in Dhiru1602's downloads and this gapps..
Download both on the SD card. Then, basically this will be the instructions to install it:
Code:
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
PD: By the way, you can use the Reboot -> Reboot to recovery option you've mentioned.
Click to expand...
Click to collapse
Thank you very much for your reply
i will try and tell you
but i will not do any thing about : Data wipe/Factory reset & 5. Format dbdata. , right ??

Drizzt_Kueh said:
If you like the jelly bean 4.1.2 (CM10) by Dhiru, surely you'll like the CM10.1 version.
It is in here. Review it for more details.
You will need the latest CM10.1 in Dhiru1602's downloads and this gapps..
Download both on the SD card. Then, basically this will be the instructions to install it:
Code:
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
PD: By the way, you can use the Reboot -> Reboot to recovery option you've mentioned.
Click to expand...
Click to collapse
I tried it
When i choose zip from sdcard and choose the rom tell me :
Installing : /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip
Finding Update package ....
opening update package ....
E: Can't open / /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip ( bad )
Installation aborted
What can i do ??

dr_amjad said:
I tried it
When i choose zip from sdcard and choose the rom tell me :
Installing : /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip
Finding Update package ....
opening update package ....
E: Can't open / /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip ( bad )
Installation aborted
What can i do ??
Click to expand...
Click to collapse
Redownload rom.
Sent from my GT-I9003 using xda premium

dr_amjad said:
I tried it
When i choose zip from sdcard and choose the rom tell me :
Installing : /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip
Finding Update package ....
opening update package ....
E: Can't open / /sdcard/others/Cm10.1-Galaxy SL - JDQ39E-Alpha8.zip ( bad )
Installation aborted
What can i do ??
Click to expand...
Click to collapse
try to remove the rom zip from sdcard and copy it again from pc, this worked for me when I tried to install slim CM 7 by TheFrankenstain (here the thread if you wanted to try it..rom link here)(You rom is awesome TheFrankenstain...thank you)
If this didn't work then try to redownload the rom (don't use your phone to download roms...bad idea).
to make sure rom's archive is not corrupted, check you rom MD5 sum (Dev-Host server provide the correct MD5)
HashCheck is a good tool for this.
---------- Post added at 09:52 PM ---------- Previous post was at 09:29 PM ----------
dr_amjad said:
Thank you very much mr mustafa
i download the ROM from video on youtube and this is link of video
http://www.youtube.com/watch?v=VqypSD3JBJk
It's CM 10 Alpha 3
And in the video there's a download link of the Rom and this is the link which in the video
http://forum.xda-developers.com/showthread.php?t=1868074
by the way : when i click power key there is an option called : Reboot
when i click on Reboot tell me that i can Reboot my phone and recovery and download mode
Thanks for your reply
Click to expand...
Click to collapse
BE CAREFUL...You can only update to CM10.1 rom (or any other rom based on CM10.1) only if you have CM10 Alpha4 rom (or any other rom based on CM10 Alpha4)
But in your case (you have CM10 A3), you have to follow the whole guide mentioned in the second post.
This is what LoLaTiOn said:
How to install
Warning only for lasted base CM10 Alpha4
if older base CM10 Alpha3 Full KPE please !!!
- Wip Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Flash first clean for mandatory starting
On CM10 Alpha 3 and all other basic Froyo, Gingerbread, ICS, JB
Click to expand...
Click to collapse
................
thread here.
If you are worried about your data make full backup using recovery and you can restore your apps or your full rom at any time...clean Install is always recommended over updating from previous versions.
BTW...I think full Nandroid restore is dangerous due to different partitioning in ICS/JB roms so it's recommended always to reparation using odin and install full firmware again.
Also, any custom rom is rooted and deodexed and has CWM recovery pre-installed.
sorry for my bad english

ASMI1 said:
try to remove the rom zip from sdcard and copy it again from pc, this worked for me when I tried to install slim CM 7 by TheFrankenstain (here the thread if you wanted to try it..rom link here)(You rom is awesome TheFrankenstain...thank you)
If this didn't work then try to redownload the rom (don't use your phone to download roms...bad idea).
to make sure rom's archive is not corrupted, check you rom MD5 sum (Dev-Host server provide the correct MD5)
HashCheck is a good tool for this.
---------- Post added at 09:52 PM ---------- Previous post was at 09:29 PM ----------
BE CAREFUL...You can only update to CM10.1 rom (or any other rom based on CM10.1) only if you have CM10 Alpha4 rom (or any other rom based on CM10 Alpha4)
But in your case (you have CM10 A3), you have to follow the whole guide mentioned in the second post.
This is what LoLaTiOn said:
................
thread here.
If you are worried about your data make full backup using recovery and you can restore your apps or your full rom at any time...clean Install is always recommended over updating from previous versions.
BTW...I think full Nandroid restore is dangerous due to different partitioning in ICS/JB roms so it's recommended always to reparation using odin and install full firmware again.
Also, any custom rom is rooted and deodexed and has CWM recovery pre-installed.
sorry for my bad english
Click to expand...
Click to collapse
Thank you very much mr ASMI 1 for your reply
but sorry i am still Noob in android development and updating
but according to your reply i must do :
- Wip Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Right ??
and please is there a video about my case (( updating samsung gt i 9003 from cm 10 alpha 3 to cm 10.1 alpha 8 )) ??
and sorry for annoyance you

ASMI1 said:
try to remove the rom zip from sdcard and copy it again from pc, this worked for me when I tried to install slim CM 7 by TheFrankenstain (here the thread if you wanted to try it..rom link here)(You rom is awesome TheFrankenstain...thank you)
If this didn't work then try to redownload the rom (don't use your phone to download roms...bad idea).
to make sure rom's archive is not corrupted, check you rom MD5 sum (Dev-Host server provide the correct MD5)
HashCheck is a good tool for this.
---------- Post added at 09:52 PM ---------- Previous post was at 09:29 PM ----------
BE CAREFUL...You can only update to CM10.1 rom (or any other rom based on CM10.1) only if you have CM10 Alpha4 rom (or any other rom based on CM10 Alpha4)
But in your case (you have CM10 A3), you have to follow the whole guide mentioned in the second post.
This is what LoLaTiOn said:
................
thread here.
If you are worried about your data make full backup using recovery and you can restore your apps or your full rom at any time...clean Install is always recommended over updating from previous versions.
BTW...I think full Nandroid restore is dangerous due to different partitioning in ICS/JB roms so it's recommended always to reparation using odin and install full firmware again.
Also, any custom rom is rooted and deodexed and has CWM recovery pre-installed.
sorry for my bad english
Click to expand...
Click to collapse
(( if older base CM10 Alpha3 Full KPE please !!! ))
what the meaning of KPE ??
and i must do this ?? (( if older base CM10 Alpha3 Full KPE please !!! ))

dr_amjad said:
(( if older base CM10 Alpha3 Full KPE please !!! ))
what the meaning of KPE ??
and i must do this ?? (( if older base CM10 Alpha3 Full KPE please !!! ))
Click to expand...
Click to collapse
it means that if you have a base older to CM10 Alpha 3 then you should proceed with full KPE,,,
so IF YOUR CURRENT ROM IS ON CM10 Alpha 3 I would suggest just flash CM10 Alpha4 base ROM by Dhiru then,
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache

mustafahussain said:
it means that if you have a base older to CM10 Alpha 3 then you should proceed with full KPE,,,
so IF YOUR CURRENT ROM IS ON CM10 Alpha 3 I would suggest just flash CM10 Alpha4 base ROM by Dhiru then,
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
Click to expand...
Click to collapse
Now i have Cm 10 alpha 3
you want me to do these steps :
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
and update my phone to Cm 10alpha 4 or cm 10.1 alpha 8 ?????????

dr_amjad said:
Now i have Cm 10 alpha 3
you want me to do these steps :
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
and update my phone to Cm 10alpha 4 or cm 10.1 alpha 8 ?????????
Click to expand...
Click to collapse
No, to upgrade from previous version of CM10 follow this:
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
Click to expand...
Click to collapse
and then
-Wipe Factory
- Format/system format/emmc
- Flash Carbon and gapps
- Reboot recovery
- Wipe cache and dalvik cache
here where to download CM10 A4 and google apps(20121011 for CyanogenMod 10.0.x) (thanks to master dhiru1602).
BTW, in the past we used to install XXKPE stock rom (pit, bootloader, PDA, Phone, and CSC)(this is what meant by full KPE) and then install DDLF2 as PDA in download mod. But now full DDLF2 is out so we don't need XXKPE anymore to make clean install, you just install full DDLF2 (pit, bootloader, PDA, Phone, and CSC) the same way you install XXKPE and then proceed with installing your custom rom.
it is recommended to make clean install always before installing any custom rom (CM or rom based on CM) to prevent any issue (installing custom rom over another custom rom may cause some problems like lags and no signal issue...etc) just make clean install.
I advise you to upgrade only if, for example; you want to update to REMICS rom and you have previous version of REMICS rom or you want to update to carbon rom and you have previous version of carbon rom or you want to update to CM10.1 A8 rom and you have previous version of CM10.1 A7 rom...Do you get my point?

[Q] [P780] ROM and CWMs?

Hi all!
I just bought my P780 from china retailer. Turns out the stock ROM doesn't support GSM lower than 2100 MHz. I've rooted my phone, so I'd like to know is the any CWM 6 recovery and how to flash it to the phone?
And is there any link to download another country's ROM so I can use my SIM?
Thanks and best regards.

CWM means clockworkmod recovery.
it does not need to be flashed
to get it,
1)get cwm zip file for your device.(use google)
2)then put that file in root directory of your sdcard
3) boot your phone in recovery mode and select cwm zip file.
then it would start cwm recovery
---------- Post added at 05:05 PM ---------- Previous post was at 05:01 PM ----------
i think there is no rom for making your sim card usable
please hit THANKS....

I managed to install CWM English using MobileUncle. Is there any ROM I can install via CWM, because the ones n needrom seems to be very difficult.

yes there are many roms available

can u tell me how to use the flashtool from the beginning since it is my first time

it is recommended to take a nandroid backup before this flashing
ok if you need to flash rom from cwm than follow steps :
1) boot in recovery mode
2) wipe data
3) select apply update from sdcard and then select CWM file.
4) after CWM opens select your rom zip file
5) now flashing of new rom will start.
6) wipe data/factory reset in recovery mode only.
7) now reboot your phone.....
rom file is a zip file which can be obtained by searching on google.
***download rom file which is only applicable for your phone*
othervise your phone will brick***
this guide is applicable to all android phones......
Sent from my GT-S5302

Bhaumik Patel said:
it is recommended to take a nandroid backup before this flashing
ok if you need to flash rom from cwm than follow steps :
1) boot in recovery mode
2) wipe data
3) select apply update from sdcard and then select CWM file.
4) after CWM opens select your rom zip file
5) now flashing of new rom will start.
6) wipe data/factory reset in recovery mode only.
7) now reboot your phone.....
rom file is a zip file which can be obtained by searching on google.
***download rom file which is only applicable for your phone*
othervise your phone will brick***
this guide is applicable to all android phones......
Sent from my GT-S5302
Click to expand...
Click to collapse
You need to do much for flashing a custom rom..
You need to do a full wipe before flashing a rom not just data.
and you don't need to wipe data/factory reset since flashing a Custom rom will automatically wipe all data.
Also on some phones mostly HTC phones you need to Flash Boot.img manually when S-ON.

oh ok......
Sent from my GT-S5302

[Q] Unable to install custom rom on canvas 2

i m a newbie here
i m unable to install this rom http://forum.xda-developers.com/showthread.php?t=2375958
whenever i m installing this rom the phone shows canvas2 icon then goes into cmw recovery mode
previously i was using rayne rom final.
i m unable to play 720p videos in rayne rom final thats why i was trying to switch in this rom.
thanks in advance

Are u using MMX A110 ? And if yes then reinstall the rom again.. Before installing wipe data and cache.. And then go to mount and storage.. format system from there. And then wipe dalvik cache. Then flash the canvas4 zip file
Sent from my Qmobile Noir A10 using Tapatalk

yes
mrtaim3 said:
Are u using MMX A110 ? And if yes then reinstall the rom again.. Before installing wipe data and cache.. And then go to mount and storage.. format system from there. And then wipe dalvik cache. Then flash the canvas4 zip file
Sent from my Qmobile Noir A10 using Tapatalk
Click to expand...
Click to collapse
i m using canvas 2
i m folowing all the steps as given.
i didnt faced any problem in installing rayne rom final.
is it happening because i m using rom build on 4.2.2 n dis xperia one is based on 4.1.2

aniket95 said:
i m using canvas 2
i m folowing all the steps as given.
i didnt faced any problem in installing rayne rom final.
is it happening because i m using rom build on 4.2.2 n dis xperia one is based on 4.1.2
Click to expand...
Click to collapse
No not really.. Im using Dark Nexus 4.2.2 and i have used every single Rom.. and all are working fine. Ok so the problem maybe persisting bcz u are not flashing it accordingly.. Download 4 files given in the thread.. First flash the larger file.. Which is the rom file. Then there comes three patches.. then flash 3 patches after that.. Flash kernel which is also given in the thread. Then reboot ur system. and see if it works

okk
mrtaim3 said:
No not really.. Im using Dark Nexus 4.2.2 and i have used every single Rom.. and all are working fine. Ok so the problem maybe persisting bcz u are not flashing it accordingly.. Download 4 files given in the thread.. First flash the larger file.. Which is the rom file. Then there comes three patches.. then flash 3 patches after that.. Flash kernel which is also given in the thread. Then reboot ur system. and see if it works
Click to expand...
Click to collapse
okk trying one more time..!
can you please elaborate the steps.:fingers-crossed:
i tried one more time it again showed me canvas 2 logo then directed to cmw recovery

First download 5 files given in the OP of that thread i.e 1 ROM,3 Patches and 1 Kernel
1). After downloading put all the files in ur sd card.
2). Reboot into CWM recovery.
3). Wipe data / cache / dalvik cache
4). Flash the ROM file
5). Then flash 3 patches
6). Then Fix permissions
7). Then reboot your phone.
Then reboot your phone to recovery again and flash kernel
4) Wipe Data/Factory Reset And Wipe Partition
5) From Advance Menu Do Dalvik Catch Clear
6) Go in Mount And Storage select FORMAT SYSTEM
7) Select Install From SD and Select File And Click YES
8) Fix Permission
9) System reboots....

mrtaim3 said:
First download 5 files given in the OP of that thread i.e 1 ROM,3 Patches and 1 Kernel
1). After downloading put all the files in ur sd card.
2). Reboot into CWM recovery.
3). Wipe data / cache / dalvik cache
4). Flash the ROM file
5). Then flash 3 patches
6). Then Fix permissions
7). Then reboot your phone.
Then reboot your phone to recovery again and flash kernel
4) Wipe Data/Factory Reset And Wipe Partition
5) From Advance Menu Do Dalvik Catch Clear
6) Go in Mount And Storage select FORMAT SYSTEM
7) Select Install From SD and Select File And Click YES
8) Fix Permission
9) System reboots....
Click to expand...
Click to collapse
is flashing kernel is necessary...?
and i m unable to understand ur steps sory..!

Hi @aniket95. If the problem exists after following the steps given by mrtaim3 then flash Stock JB ROM first. Then try custom ROM.

UnNaMeD__ said:
Hi @aniket95. If the problem exists after following the steps given by mrtaim3 then flash Stock JB ROM first. Then try custom ROM.
Click to expand...
Click to collapse
okk
thank u sir will surely try it
i dont have stock rom will download

aniket95 said:
is flashing kernel is necessary...?
and i m unable to understand ur steps sory..!
Click to expand...
Click to collapse
Andiroxu kernel is required on 4.2 JB. But you are trying to flash 4.1, so it isn't necessary to flash kernel

aniket95 said:
is flashing kernel is necessary...?
and i m unable to understand ur steps sory..!
Click to expand...
Click to collapse
No its not necessary bro.. Just flash rom and 3 patches. and if still the problem persist then try another rom.. There are many roms for mmx a110
Sent from my Qmobile Noir A10 using Tapatalk

UnNaMeD__ said:
Andiroxu kernel is required on 4.2 JB. But you are trying to flash 4.1, so it isn't necessary to flash kernel
Click to expand...
Click to collapse
thanks alot dude..!
now i have to just flash the four files.!
will surely tell you

can you suggest any good rom for canvas 2 with xperia apps

In this thread you will find every single rom for ur device.. Check it out http://forum.xda-developers.com/showthread.php?t=2172561

aniket95 said:
can you suggest any good rom for canvas 2 with xperia apps
Click to expand...
Click to collapse
Well if you searching a ROM for xperia apps. You can have these on any rom
xperia z icons:
http://forum.xda-developers.com/showthread.php?t=2249734
keyboard of zperia z and z1:
http://forum.xda-developers.com/showthread.php?t=2196653
X4 video player from Sony Xperia Z:
http://forum.xda-developers.com/showthread.php?t=2262083
xperia launcher:
http://forum.xda-developers.com/showthread.php?t=2294895
more here:
http://forum.xda-developers.com/showthread.php?t=2342863
Anyway if you want suggestion of any rom with xperia app preinstalled then i think your own choice of LegoIce_Xperia Z UI rom is good!
---------- Post added at 11:32 PM ---------- Previous post was at 11:30 PM ----------
Did you successfully flashed as I told you LegoIce_Xperia Z UI or facing any problem?
---------- Post added at 11:39 PM ---------- Previous post was at 11:32 PM ----------
aniket95 said:
thanks alot dude..!
now i have to just flash the four files.!
will surely tell you
Click to expand...
Click to collapse
After downloading stock ROM do this:
1. put all files on your sd card.
2. boot into recovery.
3. wipe data/factory reset.
4. wipe cache partition
5. advance ---> wipe dalvik cache
6. mounts and storage ----> formate system + formate cache.
7. flash stock rom
8. start your phone
9. reboot into recovery
10. follow step no. 3+4+5
11. Flash your xperia rom.
12. start your phone.
13. reboot into recovery
14. wipe cache parition + dalvik cache
15. flash your patches
16. fix permissions and start your phone.

u should install any 4.2karnel after installing rom

UnNaMeD__ said:
Well if you searching a ROM for xperia apps. You can have these on any rom
xperia z icons:
http://forum.xda-developers.com/showthread.php?t=2249734
keyboard of zperia z and z1:
http://forum.xda-developers.com/showthread.php?t=2196653
X4 video player from Sony Xperia Z:
http://forum.xda-developers.com/showthread.php?t=2262083
xperia launcher:
http://forum.xda-developers.com/showthread.php?t=2294895
more here:
http://forum.xda-developers.com/showthread.php?t=2342863
Anyway if you want suggestion of any rom with xperia app preinstalled then i think your own choice of LegoIce_Xperia Z UI rom is good!
---------- Post added at 11:32 PM ---------- Previous post was at 11:30 PM ----------
Did you successfully flashed as I told you LegoIce_Xperia Z UI or facing any problem?
---------- Post added at 11:39 PM ---------- Previous post was at 11:32 PM ----------
After downloading stock ROM do this:
1. put all files on your sd card.
2. boot into recovery.
3. wipe data/factory reset.
4. wipe cache partition
5. advance ---> wipe dalvik cache
6. mounts and storage ----> formate system + formate cache.
7. flash stock rom
8. start your phone
9. reboot into recovery
10. follow step no. 3+4+5
11. Flash your xperia rom.
12. start your phone.
13. reboot into recovery
14. wipe cache parition + dalvik cache
15. flash your patches
16. fix permissions and start your phone.
Click to expand...
Click to collapse
yeahh thanx dude
i installed stock rom first den
i installed Canxperia rom which i really liked
thanx :good:

how to clear dalvik cache as i dont get the advanced settings in my mmx canvas 2 while booting up

best way for installing roms , recovery , kernal ,........others

these is the best way installing rom or recovery or kernals ..... others
1-download mobile odin from google ...search at (mobile odin zippyshare) and download it (sorry<iam not able to share links
2-open it and download the additional files inside the app if asked
3-go to (open file..) and choose it then choose the file
4-if it is (zip) it well be extracted
5-chek wipe data/factory reset (if required)
6-begen installation
notice .....(the mobile will be rooted after reboot
please press thanks button (its free)