3.33 fw? - HTC Sensation

i think i have 3.32 fw still is there a need to upgrade?

From what I can tell the 3.33 firmware has just the following files:
adsp.img
android-info.txt
radio.img
rcdata.img
tz.img
I am not sure if updating the firmware is any different to updating to the latest radio 11.24a.3504.31_m
If the radio is flashed is there any difference to flashing the 3.33 firmware package? The new package does not contain any bootloader in it.

GhostXSeries said:
From what I can tell the 3.33 firmware has just the following files:
adsp.img
android-info.txt
radio.img
rcdata.img
tz.img
I am not sure if updating the firmware is any different to updating to the latest radio 11.24a.3504.31_m
If the radio is flashed is there any difference to flashing the 3.33 firmware package? The new package does not contain any bootloader in it.
Click to expand...
Click to collapse
Did you download the one from baadnewz's link? the proper firmware.zip has a full firmware including hboot v1.29.0000 for sensation xe and 1.27.0000 for sensation. Also the new firmware contains a new kernel version (though htc havent dropped the source for it yet so I'm spamming @htcdev on twitter )

Related

[RADIO] HTC Desire S Radios [PG88IMG.zip] (Updated: 21 Oct 2011)

Code:
/* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or the end of the world. Please do some research
* if you have any concerns about flashing a radio before flashing it!
* YOU are choosing to make these modifications, and if you point the
* finger at me for messing up your device, I will laugh at you. */
How to Flash:
In order for this to work, the HTC Desire S needs to be S-OFF. Flashing the radio with a corrupt file or interrupting the flash, can brick the device, please proceed with caution.
Download the your choice of radio for the HTC Desire S.
Make sure the filename is PG88IMG.zip exactly or it will not work and copy it to the same folder as adb (the /platform-tools folder within the Android SDK folder).
Connect the HTC Desire S to the computer via USB.
On the computer, open terminal and run the following commands:
Code:
adb push PG88IMG.zip /sdcard/PG88IMG.zip
adb shell md5sum /sdcard/PG88IMG.zip
NOTE: The md5 should match up the provide the original download location. If not, redownload & try again.
Code:
adb reboot bootloader
The HTC Desire S will reboot & usually boot into fastboot. Pressing the Power button will put the device into the bootloader.
The bootloader will scan for the radio update. Once it finds the update, select Yes.
Allow the bootloader to finish flashing the updated radio, and reboot the HTC Desire S normally.
Downloads:
From Gingerbread-based RUUs:
From the Saga Test RUU:
20.23.30.0802U_38.02.01.11
md5: 68b46430f42c07ecdc4f1e68bdaf9123
From the 1.28.401.1 RUU:
20.28b.30.0805U_38.03.02.11
md5: 27d85ee9604584becfa59c213708370a
From the 1.30.110.2_R RUU:
has the same radio as the 1.28.401.1 RUU
From the 1.30.111.1 RUU:
has the same radio as the 1.28.401.1 RUU
From the 1.30.112.1 RUU:
has the same radio as the 1.28.401.1 RUU
From the 1.31.61.1 RUU:
has the same radio as the 1.28.401.1 RUU
From the 1.31.65.1 RUU:
has the same radio as the 1.28.401.1 RUU
From the 1.31.206.1 RUU:
20.28b.30.0805U_38.03.02.14
md5: a898a290eb58ec618ceb3865a90dc878
From the 1.31.351.1 RUU:
20.28b.30.0805U_38.03.02.15
md5: 757cde85b4e8736db93088134f9afc8e
From the 1.31.707.2_R RUU:
has the same radio as the 1.31.351.1 RUU
From the 1.31.720.2_R RUU:
has the same radio as the 1.31.206.1 RUU
From the 1.31.771.1 RUU:
has the same radio as the 1.31.206.1 RUU
From the 1.31.832.3 RUU:
20.28d.30.0805U_3805.04.02.01
md5: 631afebe525a455f34b2238108ac1b43
From the 1.31.950.2_R RUU:
has the same radio as the 1.31.206.1 RUU
From the 1.31.1020.1 RUU:
20.28c.30.0805U_38.03.02.16
md5: 5d82b1d2a70a46eaa93ad10964809f1a
From the 1.32.161.1 RUU:
has the same radio as the 1.31.351.1 RUU
From the 1.35.1113.2 RUU:
has the same radio as the 1.31.832.3 RUU
From the 1.36.415.6 RUU:
has the same radio as the 1.31.832.3 RUU
From the 1.36.841.3 RUU:
has the same radio as the 1.31.832.3 RUU
From the 1.46.1400.8 RUU:
20.28f.30.085AU_3805.04.02.28
md5: f4951ae92f6abd85823d916f46e5312e
From the 1.47.401.4 RUU:
20.28I.30.085AU_3805.06.02.03
md5: 57a3fcc5f72ec928050dbcb32018215f
From the 1.47.832.1 RUU:
has the same radio as the 1.47.401.4 RUU
From the 1.47.950.3 RUU:
has the same radio as the 1.47.401.4 RUU
From the 1.48.707.1 RUU:
has the same radio as the 1.47.401.4 RUU
From the 2.10.401.4 OTA:
20.48.30.0822U_3822.09.08.20
md5: 053544276893dfcc3a7a722c834b6020
From the 2.10.401.5 RUU:
20.4801.30.0822U_3822.10.08.04
md5: 2fddef29eb1f8001d9cad14f48061f54
Thanks for putting these in one place, and even though there's a warning about bricking phone's, I would like to warn everyone that flashing a radio is very rarely necessary, and should not be done on a whim!!! Not enough is known about recovering from a bad flash on the NVRam (radio), and if this happens you could end up with a very expensive calculator.
Thanks a LOT !!!!!!! My radio is here, so i can flash others, and if i find errors, i can come back. Thanks again man.
New Radio from leaked official ROM
This is the Radio that came with the recently leaked official Desire S Sense v3.0 ROM.
20.4130.0818U_3817.07.00.19_M RADIO
so is this linux only or can the terminal be replaced with the command prompt?
dan-fish said:
so is this linux only or can the terminal be replaced with the command prompt?
Click to expand...
Click to collapse
This isn't for linux specifically, this is also possible for windows, where by terminal he means windows command prompt (CMD), assuming that you have the relevant ADB installed.
If you don't download it from here
I have a question: there are some compatibility issue between radio and hboot version?
You can use the new radio with the old hboot.
Any problem for use that.
If you want to install the new hboot while you have already install the new radio, there's no problem of incompatibility
ben_pyett said:
This is the Radio that came with the recently leaked official Desire S Sense v3.0 ROM.
20.4130.0818U_3817.07.00.19_M RADIO
Click to expand...
Click to collapse
Can anyone confirm what the md5sum for this file should be?
Any chance a download link for this radio could be added to the top post?
There is already newer radio available - 20.44.30.0821U_3821.08.00.24_M
uoosuow said:
There is already newer radio available - 20.44.30.0821U_3821.08.00.24_M
Click to expand...
Click to collapse
[RADIO](added ril)New leaked radio:20.44.30.0821U_3821.08.00.24_M
Well done @ben_pyett
Thk's
It would be nice if the top post could be updated with these radios & md5sums
hint hint @gu1dry
runagate17 said:
It would be nice if the top post could be updated with these radios & md5sums
hint hint @gu1dry
Click to expand...
Click to collapse
I only add radios pulled from full RUUs (that I pulled personally) or reliable sources.
gu1dry said:
I only add radios pulled from full RUUs (that I pulled personally) or reliable sources.
Click to expand...
Click to collapse
Fair enough! much safer that way.....you don't get people shouting at you then!
If people want the other leaked RADIO's there are links to them elsewhere!
Question:
Is there somewhere a GUIDE for downgrading Radio if the leaked one will not work how i hope?
Sure. The guide are so simple:
you'll have to use fastboot command but not the PG88IMG flash
Use a simple command : fastboot flash radio your_radio_file.img
And as "your_radio_file.img" i'll take the image file included in PG88IMG.zip.
Am i right?
When you unzipped the PG88IMG, you've found a file "radio.img"
my radio on my HTC DS is 20.28I.30.085AU_3805.06.02.03_M on this post no "_M" on the end. is there a difference on that? thanks!

[Q] Radio for HTC Sensation 6.11

I flashed new firmware 3.24.401.1 RUU and then flashed 6.11 Rom
But doesn’t show radio 11.68.3504.00U_11.21.3504.13_2.
I still have radio 11.65.3504.00U_11.19.3504.29_2
Not sure what to do from here, please advise.
Usually radio fails to flash correctly if you try to flash the firmware package without having supercid (or having correct firmware for your cid http://forum.xda-developers.com/showthread.php?t=1459767)

Wifi fixed on 3.33 update, but not in custom roms

My sensation (Non XE) was initially with ASIA ruu, after receiving ICS update, my WIFI was dead and after 3.33 recent update, it was fixed. Now I want to install custom rom with sense 4, but they are based on 3.32 ruu, and my wifi is not working on it. so what should I do? should I install 3.32 rom and after that flash radio which is in 3.33 or what...
Thanks in advance
mamarda said:
My sensation (Non XE) was initially with ASIA ruu, after receiving ICS update, my WIFI was dead and after 3.33 recent update, it was fixed. Now I want to install custom rom with sense 4, but they are based on 3.32 ruu, and my wifi is not working on it. so what should I do? should I install 3.32 rom and after that flash radio which is in 3.33 or what...
Thanks in advance
Click to expand...
Click to collapse
I have fixed it installing 3.33 radio and rill files, also wifix manager, because I couldn't find radio and rills from ASIA RUU 3.33 and used Europe version. could anyone provide me with ASIA 3.33 radio???

How to Flash Latest RUU

Hi i have to sell my sensatiion xe and i want ot flash latest ruu. I have opensensation withe 3.33 firmware. what are the steps to flash latest ruu?
wend0 said:
Hi i have to sell my sensatiion xe and i want ot flash latest ruu. I have opensensation withe 3.33 firmware. what are the steps to flash latest ruu?
Click to expand...
Click to collapse
Download 3.33.401.106 RUU from Football's Shipped ROM Collection thread.
Run it from windows pc - its an exe file
RUU
All ruu related info is here
http://forum.xda-developers.com/showthread.php?t=1672425

Baseband(radio update) ?

Hi, my current version of Baseband is 20.28I.30.085AU_3805.06.02.03_M and i want to install and run ROM ICE DS v 4.4 where i saw that recommended radio is: 20.72.30.0833U_3831.17.00.310..so i am not sure what should i do(how to upgrade it)??, i taught it's better to ask here than to search for some guides etc. coz i read that if something is done wrong , the phone is dead
bobahajduk said:
...i taught it's better to ask here than to search for some guides etc. coz i read that if something is done wrong , the phone is dead
Click to expand...
Click to collapse
Very bad thought and wrong assumption that you'll get better help here by hell knows whom, instead of reading the guides that were written to be understood and executed by thousands of people till today.
See this Guide:
nodeffect said:
HTC Desire S Tutorials/Guides
Click to expand...
Click to collapse
Sent from my Desire S
so i found the list:'' From the Saga Test RUU:
20.23.30.0802U_38.02.01.11
md5: 68b46430f42c07ecdc4f1e68bdaf9123
From the 1.28.401.1 RUU:
20.28b.30.0805U_38.03.02.11
md5: 27d85ee9604584becfa59c213708370a
From the 1.30.110.2_R RUU:
has the same radio as the 1.28.401.1 RUU
From the 1.30.111.1 RUU:
has the same radio as the 1.28.401.1 RUU
From the 1.30.112.1 RUU:
has the same radio as the 1.28.401.1 RUU
From the 1.31.61.1 RUU:
has the same radio as the 1.28.401.1 RUU
From the 1.31.65.1 RUU:
has the same radio as the 1.28.401.1 RUU
From the 1.31.206.1 RUU:
20.28b.30.0805U_38.03.02.14
md5: a898a290eb58ec618ceb3865a90dc878
From the 1.31.351.1 RUU:
20.28b.30.0805U_38.03.02.15
md5: 757cde85b4e8736db93088134f9afc8e
From the 1.31.707.2_R RUU:
has the same radio as the 1.31.351.1 RUU
From the 1.31.720.2_R RUU:
has the same radio as the 1.31.206.1 RUU
From the 1.31.771.1 RUU:
has the same radio as the 1.31.206.1 RUU
From the 1.31.832.3 RUU:
20.28d.30.0805U_3805.04.02.01
md5: 631afebe525a455f34b2238108ac1b43
From the 1.31.950.2_R RUU:
has the same radio as the 1.31.206.1 RUU
From the 1.31.1020.1 RUU:
20.28c.30.0805U_38.03.02.16
md5: 5d82b1d2a70a46eaa93ad10964809f1a
From the 1.32.161.1 RUU:
has the same radio as the 1.31.351.1 RUU
From the 1.35.1113.2 RUU:
has the same radio as the 1.31.832.3 RUU
From the 1.36.415.6 RUU:
has the same radio as the 1.31.832.3 RUU
From the 1.36.841.3 RUU:
has the same radio as the 1.31.832.3 RUU
From the 1.46.1400.8 RUU:
20.28f.30.085AU_3805.04.02.28
md5: f4951ae92f6abd85823d916f46e5312e
From the 1.47.401.4 RUU:
20.28I.30.085AU_3805.06.02.03
md5: 57a3fcc5f72ec928050dbcb32018215f
From the 1.47.832.1 RUU:
has the same radio as the 1.47.401.4 RUU
From the 1.47.950.3 RUU:
has the same radio as the 1.47.401.4 RUU
From the 1.48.707.1 RUU:
has the same radio as the 1.47.401.4 RUU
From the 2.10.401.4 OTA:
20.48.30.0822U_3822.09.08.20
md5: 053544276893dfcc3a7a722c834b6020
From the 2.10.401.5 RUU:
20.4801.30.0822U_3822.10.08.04
md5: 2fddef29eb1f8001d9cad14f48061f54''
But i dont understand which is a right one for me ??
My personal view: until you have learnt more, don't worry about changing radios. Then, if you are having issues that are radio related, then upgrade.
Or, once you are more familiar with changing your phone, then try different radios.
Fyi, I'm on Radio-20.4801.30.0822U_3822.10.08.04
Sent from my Desire S
BillGoss said:
My personal view: until you have learnt more, don't worry about changing radios. Then, if you are having issues that are radio related, then upgrade.
Or, once you are more familiar with changing your phone, then try different radios.
Fyi, I'm on Radio-20.4801.30.0822U_3822.10.08.04
Sent from my Desire S
Click to expand...
Click to collapse
i already had some strange issues with fallout(slow,buggy,youtube not working) than with icecold sandwich (phone restarting)...so i don't know whats the problem ...so i suppose i should upgrade that Radio or whatever..i just want to start using my phone without having always to think about force closing, freezing, restarting etc...
If you want a phone with no issues - then you shouldn't use ICS ROMs yet, until it's officially released.
I Think you Should try and flash the rom and see how it goes...
because there is a good chance it'll work just fine with your current radio.
If not... there is nothing too difficult in flushing a radio, it's a very simple
process if you already unlocked your phone.
maxlieb said:
I Think you Should try and flash the rom and see how it goes...
because there is a good chance it'll work just fine with your current radio.
If not... there is nothing too difficult in flushing a radio, it's a very simple
process if you already unlocked your phone.
Click to expand...
Click to collapse
so if you can answer to my first post it would be very nice
Read the RADIO sticky thread on the development section
Sywepd form my DsereiS

Categories

Resources