Database Info

【ROM】Download link for Official A510 Rom (updated by 9th Nov)

Hi everyone,
I calculate a download website n it can be successfully entered:
http://global-download.acer.com/Ste...0&BC=Acer&SC=&LC=en&OS=a09&FS=O02&Category=OS
Note: If u see nothing there, plz reflash a few times.
(updated by 9th Nov)
Some patches added, u guys can check it out. ( I flashed the patch n found nothing changed! seemd just update some built-in softwares )
(updated by 25th Sep)
There'r some new ROMs with clear label added.

Interesting!
The ROMs on that site are:
Acer_AV041_A510_1.072.00_EMEA_CUS1
Acer_AV041_A510_1.073.00_WW_GEN1
Acer_AV041_A510_1.074.00_EMEA_GB
Acer_AV041_A510_1.076.00_EMEA_DE
Acer_AV041_A510_1.076.00_PA_CUS1
Acer_AV041_A510_1.079.00_PA_CA
Acer_AV041_A510_1.084.00_AAP_AU
Acer_AV041_A510_1.090.00_TWN_GEN1
There's a couple new regions there I didn't know existed

NoThrills said:
Interesting!
The ROMs on that site are:
Acer_AV041_A510_1.072.00_EMEA_CUS1
Acer_AV041_A510_1.073.00_WW_GEN1
Acer_AV041_A510_1.074.00_EMEA_GB
Acer_AV041_A510_1.076.00_EMEA_DE
Acer_AV041_A510_1.076.00_PA_CUS1
Acer_AV041_A510_1.079.00_PA_CA
Acer_AV041_A510_1.084.00_AAP_AU
Acer_AV041_A510_1.090.00_TWN_GEN1
There's a couple new regions there I didn't know existed
Click to expand...
Click to collapse
So you downloaded all n checked them one by one? Thx for the instructions.

Can I flash these over CWM ?

picard47 said:
Can I flash these over CWM ?
Click to expand...
Click to collapse
I haven't tested these ROMs yet, my tab is still on the way from service.
You can have a try unless u know what u do.

jokerzlh said:
So you downloaded all n checked them one by one? Thx for the instructions.
Click to expand...
Click to collapse
Yeah, I wanted to know if there was a new build somewhere... Unfortunately not
picard47 said:
Can I flash these over CWM ?
Click to expand...
Click to collapse
Yes, but they will remove your custom recovery and might even lock your bootloader (there are bootloader.blob files, but I don't know what they do).

only 6 are showing now?? im grabbing them all, hoping my region is still one of them!

Hmm that's odd I have a au over and I cannot ota to the newer version listed??
Acer_AV041_A510_1.084.00_AAP_AU
Mine atm is Acer_AV041_A510_1.036.00_AAP_AU
---------- Post added at 04:58 PM ---------- Previous post was at 04:11 PM ----------
malos1984 said:
Hmm that's odd I have a au over and I cannot ota to the newer version listed??
Acer_AV041_A510_1.084.00_AAP_AU
Mine atm is Acer_AV041_A510_1.036.00_AAP_AU
Click to expand...
Click to collapse
If I download to tab and go to built in recovery and load this firmware could it lock or stuff future otas?

You need to scroll down to see the 2 other ones..
Sent from my MB525 using xda app-developers app

malos1984 said:
Hmm that's odd I have a au over and I cannot ota to the newer version listed??
Acer_AV041_A510_1.084.00_AAP_AU
Mine atm is Acer_AV041_A510_1.036.00_AAP_AU
---------- Post added at 04:58 PM ---------- Previous post was at 04:11 PM ----------
If I download to tab and go to built in recovery and load this firmware could it lock or stuff future otas?
Click to expand...
Click to collapse
Yes. This is also important for other users reading this thread: These ROMs are probably beta's, so if you flash this on your tablet you won't get new OTA's. I'm not 100% certain about this, but just in case: Make a backup!!!

OK so its not like Samsung where I can install the firmware and go back.
Btw when I do power and volume I get android guy with red error why is this. I have not rooted nor tried to install kernel/rom before
I was under the hope an official firmware wouldn't void warranty but it looks like it won't do updates without cwm which I'm not comfortable installing at this time

Marmotte51 said:
You need to scroll down to see the 2 other ones..
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
lol, oops, didnt see the scroll bar hidden over there....

Rusty_Gunn said:
lol, oops, didnt see the scroll bar hidden over there....
Click to expand...
Click to collapse
Sent from my A510 using xda app-developers app

malos1984 said:
OK so its not like Samsung where I can install the firmware and go back.
Btw when I do power and volume I get android guy with red error why is this. I have not rooted nor tried to install kernel/rom before
I was under the hope an official firmware wouldn't void warranty but it looks like it won't do updates without cwm which I'm not comfortable installing at this time
Click to expand...
Click to collapse
That's because the Acer recovery does not have a menu or other interface. If you boot into stock recovery, you'll get the 'error android'. If you boot to recovery with a file called 'update.zip' on your SD-card, the stock recovery will flash this update.zip without error.
However, you can only flash official update.zip files with this, no custom ROMs.

NoThrills said:
That's because the Acer recovery does not have a menu or other interface. If you boot into stock recovery, you'll get the 'error android'. If you boot to recovery with a file called 'update.zip' on your SD-card, the stock recovery will flash this update.zip without error.
However, you can only flash official update.zip files with this, no custom ROMs.
Click to expand...
Click to collapse
Oh OK thanks.
Yeah I tried installing that one from SD card it failed at 50%

regarding the update script,
to get these roms to work, the region check needs to be bypassed (after installing a custom rom), can i just comment out the line in question?
assert(getprop("ro.product.name") == "a510_pa_ca");
and to keep cwm recovery, can i just comment out the recovery package extraction?
package_extract_dir("recovery", "/system");
do i need to comment out the bootloader.blob file? some of what i read seems to indicate if i dont comment it out, the bootloader will be locked after flashing.
then rezip, make sure cwm is set to take an unsigned zip, and flash?

for those trying to select the right rom and dont want to download all 8, the correspond regions are as follows (the RV28RCXX begin an excerpt from the file name on the acer site):
Acer_AV041_A510_1.072.00_EMEA_CUS1 --> RV28RC02
Acer_AV041_A510_1.073.00_WW_GEN1 --> RV28RC01
Acer_AV041_A510_1.074.00_EMEA_GB --> RV28RC03
Acer_AV041_A510_1.076.00_EMEA_DE --> RV28RC04
Acer_AV041_A510_1.076.00_PA_CUS1 --> RV28RC04
Acer_AV041_A510_1.079.00_PA_CA --> RV28RC06
Acer_AV041_A510_1.084.00_AAP_AU --> RV28RC08
Acer_AV041_A510_1.090.00_TWN_GEN1 --> RV28RC10
they all have region checks, so if you have installed a custom rom, the acer roms will fail to flash without some additional tweaking. And two regions (RC04) do have the exact same file name, no idea why acer did that.

And for A511 ?

OK so I retried flashing after saving data and it worked this time last time I tried it kept failing at 50%.
No noticeable difference and the stock browser still crashes on me.
Oh well just have to wait for jelly bean update maybe for some noticeable fixes.
Acer_AV041_A510_1.084.00_AAP_AU --> RV28RC08
For any Aussies reading here I have tested a full deplete and had no major issues except the ones I was already getting I.e stock browser crash and occasionally can't wake up the device.
Though this hasn't happened yet I'm assuming it still is there.

FordSierra88 said:
And for A511 ?
Click to expand...
Click to collapse
The website for A511 is almost same,.
But no ROMs available now. I will keep updating.

Nexus 5 with "TeamWin" failed update - and won't start again

Hello everyone.
Two hours ago I received the notification about the Android 5.0 update. I downloaded it and hit "Install". Then, "TeamWin" started, but not the update. I rebooted into System and tried to update again - but it tells me that 4.4.4 is the latest version I can get now. I'm on Build KTU84P now.
1) Do I need to remove TeamWin? If yes, with what?
2) How can I start the update again? I'm on a super slow connection and it would hurt to download the 500 MB again…
Thank you!

Fablus said:
Hello everyone.
Two hours ago I received the notification about the Android 5.0 update. I downloaded it and hit "Install". Then, "TeamWin" started, but not the update. I rebooted into System and tried to update again - but it tells me that 4.4.4 is the latest version I can get now. I'm on Build KTU84P now.
1) Do I need to remove TeamWin? If yes, with what?
2) How can I start the update again? I'm on a super slow connection and it would hurt to download the 500 MB again…
Thank you!
Click to expand...
Click to collapse
You need to remove TeamWin, and load up your stock recovery. I don't have the exact instructions for this unfortunately.
The OTA update will come back to your phone soon, usually. Did for me within the hour.
The issue I am having now, back with stock recovery, is during the install I am getting a dead Android error icon, and can't continue. Looking for any help I can, and hopefully it will help you too.

Mysticodex said:
You need to remove TeamWin, and load up your stock recovery. I don't have the exact instructions for this unfortunately.
The OTA update will come back to your phone soon, usually. Did for me within the hour.
The issue I am having now, back with stock recovery, is during the install I am getting a dead Android error icon, and can't continue. Looking for any help I can, and hopefully it will help you too.
Click to expand...
Click to collapse
Maybe we need http://forum.xda-developers.com/google-nexus-5/general/stock-checker-zip-prepare-ota-t2927865?
Gosh, this used to be so easy all the time.

if you are using twrp, why the heck are you trying to install the ota? why not download(from xda) and flash a recovery flashable stock or aosp build, and make life much easier for yourself? heck, i dirty flashed from 444 to 5.0 via an aosp flashable zip without any issues, and kept all my data.

simms22 said:
if you are using twrp, why the heck are you trying to install the ota? why not download(from xda) and flash a recovery flashable stock or aosp build, and make life much easier for yourself? heck, i dirty flashed from 444 to 5.0 via an aosp flashable zip without any issues, and kept all my data.
Click to expand...
Click to collapse
I've read http://forum.xda-developers.com/goo...-android-4-4-3-ktu84m-rooted-busybox-t2557523 and it clearly states
-Do a factory reset (maybe you can keep data coming from STOCK 4.4.4 - maybe)
Click to expand...
Click to collapse
And I didn't want to count on a maybe.

I'm using stock recovery, rooted as per normal, and a custom kernal. OTA is giving an Android dead error, with no text. Trying to figure out how to diagnose this.

Fablus said:
I've read http://forum.xda-developers.com/goo...-android-4-4-3-ktu84m-rooted-busybox-t2557523 and it clearly states
Click to expand...
Click to collapse
it clearly states what? to use recovery version 2.8+? i used an older version, twrp version 2.6.2.4. what else?
---------- Post added at 05:51 PM ---------- Previous post was at 05:48 PM ----------
Mysticodex said:
I'm using stock recovery, rooted as per normal, and a custom kernal. OTA is giving an Android dead error, with no text. Trying to figure out how to diagnose this.
Click to expand...
Click to collapse
it wont flash over a rooted rom anymore as of lollipop. you can flash the factory img via fastboot though, in your bootloader.

simms22 said:
it clearly states what? to use recovery version 2.8+? i used an older version, twrp version 2.6.2.4. what else?
---------- Post added at 05:51 PM ---------- Previous post was at 05:48 PM ----------
it wont flash over a rooted rom anymore as of lollipop. you can flash the factory img via fastboot though, in your bootloader.
Click to expand...
Click to collapse
Trying to remove the root right now via SuperSU. I am hopeful it will work better afterwards.
Edit: SuperSU unrooted it, rebooted, did OTA again, error again. Is there no way to find out what this error is?

OTA Update

I just received notification for OTA update. (134MB)
BLU_p0010UU_V11_GENERIC_5.1_20151123-0956
1. Stagefright patch
2. google security patches
3. Mcafee security 2015
4.Other bug fixes
Anyone tried it ?

i want to know if it is going to try and stick me with mcafee. . . happy to see an update, though!

you can remove mcafee after the update.

Can anyone upload ota?

Yes please. I'm rooted and it won't let me download the update. If someone could even offer a system dump that would be helpful.
---------- Post added at 02:29 PM ---------- Previous post was at 02:28 PM ----------
If only for the stage fright patch
---------- Post added at 02:32 PM ---------- Previous post was at 02:29 PM ----------
Also if someone could offer a system dump of the newest upgrade I'd be more than willing to cook up a rooted stock rom. I know I haven't been on the forums much lately at all but I remember working on stuff back in the t-mobile g1 days

Rooting after the update
I only first tried to root my Blu Pure XL after the update was installed. I find that the boot loader is locked and I can not find a way to gain access. I am not sure if the update added this major inconvenience but I suspect it did as the rooting method as described will not work for me at all. Any thoughts or suggestions?

blacksmithjk said:
I only first tried to root my Blu Pure XL after the update was installed. I find that the boot loader is locked and I can not find a way to gain access. I am not sure if the update added this major inconvenience but I suspect it did as the rooting method as described will not work for me at all. Any thoughts or suggestions?
Click to expand...
Click to collapse
ive updated with every ota and root works fine... boot loader isnt locked... try to flash twrp via fastboot, and if that doesnt work enable developer options in settings and "Enable OEM unlock"
but like i said Ive flashed back to stock FW with SP tool (compete stock boot, recovery, and system ver .11) so if any update would have locked BL it would have locked mine... but it didnt, doesnt, and hasnt...
Follow the thread about twrp... it gives you very easy to follow directions.

Yeah, I did the OTA update before rooting, and it didn't want to allow me after the OTA update.
I downloaded multiple files from all over the place, placed them in a "root" subfolder and it still seemed impossible.
Got it done AFTER 3 days

so...
using flashboot to flash twrp, after the OTA,
then using twrp to flash the SU.zip took 3 days?
what files and "root folder" are you referring to?
Sounds like sever case of lack of reading or lack or user error;
But Im glad you stuck with it long enough to get it working...
ArconHadron said:
Yeah, I did the OTA update before rooting, and it didn't want to allow me after the OTA update.
I downloaded multiple files from all over the place, placed them in a "root" subfolder and it still seemed impossible.
Got it done AFTER 3 days
Click to expand...
Click to collapse

tbirdguy said:
ive updated with every ota and root works fine... boot loader isnt locked... try to flash twrp via fastboot, and if that doesnt work enable developer options in settings and "Enable OEM unlock"
but like i said Ive flashed back to stock FW with SP tool (compete stock boot, recovery, and system ver .11) so if any update would have locked BL it would have locked mine... but it didnt, doesnt, and hasnt...
Follow the thread about twrp... it gives you very easy to follow directions.
Click to expand...
Click to collapse
tbirdguy said:
so...
using flashboot to flash twrp, after the OTA,
then using twrp to flash the SU.zip took 3 days?
what files and "root folder" are you referring to?
Sounds like sever case of lack of reading or lack or user error;
But Im glad you stuck with it long enough to get it working...
Click to expand...
Click to collapse
Thanks, hardest part was actually getting phone to boot into flash mode.
Specifically, holding Power plus Volume+ is fine, but you have to let go of the power button first, then the Volume+.
Plus, I had to adb reboot before getting the TWRP rom to flash properly....
Not my best effort, but findintg SPECIFIC instructions were difficult, and had to manually search for latest fastflash and TWRP......v2.8.6.0

ArconHadron said:
Thanks, hardest part was actually getting phone to boot into flash mode.
Specifically, holding Power plus Volume+ is fine, but you have to let go of the power button first, then the Volume+.
Plus, I had to adb reboot before getting the TWRP rom to flash properly....
Not my best effort, but findintg SPECIFIC instructions were difficult, and had to manually search for latest fastflash and TWRP......v2.8.6.0
Click to expand...
Click to collapse
Fastflash?
Manually search?
Under the Development heading there are 5 topics, 2 of which are for TWRP recoveries (3.0.2 is buggy but works, just takes long time to wipe and restore; and theres SOOOOO many posts about how to flash them and how to use SP Flash Tool... so once again; glad you stuck with it, but Im still going with user error due to fail to RTFM

[OTA] Official Marshmallow build MCG24.251-5

WARNING: THIS HAS BRICKED PHONES! It is suspected that having an encrypted phone causes these bricks, but that has not been confirmed. If your data partition is encrypted, it is extra important that you perform a factory reset before taking this OTA. Doing this will remove the encryption.
WARNING: INSTALLING THIS ON A LOCKED BOOTLOADER WILL ELIMINATE ALL CHANCE OF YOU EVER UNLOCKING YOUR BOOTLOADER.
If your bootloader is unlocked, it will not be re-locked after this update.
Do NOT flash this using TWRP. If you want to do that, use this version: http://forum.xda-developers.com/droid-turbo/development/rom-mcg24-251-5-100-stock-t3512949
So if you're a bad enough dude to flash this anyway, follow these instructions:
1. Backup all data on your phone. It will be lost.
2. If your bootloader is locked, make sure you are on SU4TL-49. If you aren't, take all available OTAs until you are.
3. If your bootloader is unlocked and you have TWRP installed, flash SU4TL-49 using this package: https://mega.nz/#!3xRhiaSR!KxH2Ya_BYK4zBjrxmej7dqaaDJVT1coTFJVJ5Fvb2WM
4. If you have TWRP installed on your phone, download the stock SU4TL-49 recovery here: https://mega.nz/#!L1AkQD4T!qoZIlLa-wuUBLMEi_gE574meiHd6Pehb34a-x3Gb-V8 and install it using the install image option in the install menu in TWRP. Reboot to recovery.
3. Perform a factory reset using the stock recovery menu. This will wipe all data and ensure that everything is formatted exactly as it should be.
4. Boot the phone normally and place the marshmallow update on the root of the directory that pops up when you plug in your phone.
5. Boot to recovery and at the stock recovery menu, select "apply update from sdcard."
6. Select the update and cross your fingers.
Get the update here: https://mega.nz/#!v0pRwThS!Pz9xuOSPjiOMtjlORkFrZ_ok0GTKqCfGzi5KmbDpHQ8

TheSt33v said:
WARNING: THIS HAS BRICKED PHONES! Do not use this unless you know what you're doing.
I will do my best to provide more detailed instructions later today. Good luck.
https://mega.nz/#!v0pRwThS!Pz9xuOSPjiOMtjlORkFrZ_ok0GTKqCfGzi5KmbDpHQ8
Click to expand...
Click to collapse
Are you sure that that file is the right one? It has the same version number as su4tl-49.

zys52712 said:
Are you sure that that file is the right one? It has the same version number as su4tl-49.
Click to expand...
Click to collapse
I'm positive. I seem to remember they did the same thing with SU4TL-49. The OTA was named after SU4TL-44 for some reason.

This is the stock recovery version, correct?

koftheworld said:
This is the stock recovery version, correct?
Click to expand...
Click to collapse
Correct. You install this using the sideload option in the stock recovery.

TheSt33v said:
Correct. You install this using the sideload option in the stock recovery.
Click to expand...
Click to collapse
Thanks for the info and the download! You finally brought the wall down. I'm waiting for the twrp version myself
.

Thank you, now we can see what can be done with the new modem, kernel, etc...
Looking forward to a plethora of improvements to our phones

koftheworld said:
Thanks for the info and the download! You finally brought the wall down. I'm waiting for the twrp version myself
.
Click to expand...
Click to collapse
I'm testing the TWRP version now. It should be up shortly.
EDIT: I flashed it and it seems to work fine. Uploading now. Should be up in a few hours. I'll check on it after I go run some errands real quick.

Despite having software status report official, not modified, I too got a status 7 error. Downloading again.
---------- Post added at 09:52 PM ---------- Previous post was at 09:51 PM ----------
zys52712 said:
Are you sure that that file is the right one? It has the same version number as su4tl-49.
Click to expand...
Click to collapse
This used to always be Motorola's naming scheme. New updates were named after the firmware version they replaced.

Sweet. I am going to wait till it is more stable. I do have a bad esn Turbo but I will need to unlock to bootloader to test.

Mirror for people having "quota exceeded" error at Mega
https://yadi.sk/d/AhmhE-yX32E84p
Rename to Blur_Version.24.81.5.quark_verizon.verizon.en.US.zip before use, throw in internal storage, and check for updates.
PS: I have 64Gb Employee Edition, and still had not receive update by air. What a shame, VZ! )

kitcostantino said:
Despite having software status report official, not modified, I too got a status 7 error. Downloading again.
---------- Post added at 09:52 PM ---------- Previous post was at 09:51 PM ----------
This used to always be Motorola's naming scheme. New updates were named after the firmware version they replaced.
Click to expand...
Click to collapse
Error 7? Are you trying to flash this in TWRP? Because you can't do that with this package. You need the stock recovery. I'm uploading a TWRP-friendly version now, but the internet is being slow today.

TheSt33v said:
Error 7? Are you trying to flash this in TWRP? Because you can't do that with this package. You need the stock recovery. I'm uploading a TWRP-friendly version now, but the internet is being slow today.
Click to expand...
Click to collapse
Negative. Stock recovery on a system that reports "Official". I'm at a loss.

kitcostantino said:
Negative. Stock recovery on a system that reports "Official". I'm at a loss.
Click to expand...
Click to collapse
Strange. Try reflashing SU4TL-49. If my TWRP package doesn't do it for you, use the full firmware package and do it manually with fastboot.

Installed successfully on two devices.
...
kitcostantino, did you refresh system, kernel, modem and recovery by SU4TL-49? Are you sure you didn't mess with Turbo Maxx ROMs in the past? Foreign bootloader can cause even brick, not just error. See bootloader status at fastboot mode should be " locked, status 0"

s5610 said:
Installed successfully on two devices.
...
kitcostantino, did you refresh system, kernel, modem and recovery by SU4TL-49? Are you sure you didn't mess with Turbo Maxx ROMs in the past? Foreign bootloader can cause even brick, not just error. See bootloader status at fastboot mode should be " locked, status 0"
Click to expand...
Click to collapse
lol. lawd, No. Ive been rocking status 3 for over a year.
As a tip, if anyone else with an unlocked bootloader runs into this,
what i had to do was restore my su-44 unmodified backup, OTA to SU-49, and then, after confirming my
q/e status was 0/1 i was able to update via the file in my Mega download folder. all is well now. they even added the newer version of command center. sweet. thank you all!!

It works in LOCKED BOOTLOADER??? .-.

square1230 said:
It works in LOCKED BOOTLOADER??? .-.
Click to expand...
Click to collapse
Um, I couldn't tell you.i be been unlocked since the day Sunshine could unlocked our bootloader's. What I can tell you is you should absolutely unlock that via Sunshine before you even dream of applying this update. There will never be another opportunity.
Just my
.02. This is likely the last update for this phone, and your only chance of seeing N is via custom Roms.

TWRP version up now: http://forum.xda-developers.com/droid-turbo/development/rom-mcg24-251-5-100-stock-t3512949

square1230 said:
It works in LOCKED BOOTLOADER??? .-.
Click to expand...
Click to collapse
Yes it should. See instructions in OP.

[7.0/8.0][WW] ZE520KL FOTA Update Links

Moving forward, let's add OTA Update links here for users who cannot receive OTA notifications.
Flash via stock recovery. If your system has been modified, you may need to flash stock system image or the stock firmware.
IMPORTANT: Do not boot to system immediately!! Flash the no-verity file via TWRP first, then reboot:
No-verity file
[7.0] ZE520KL OTA (for WW SKU only)
WW_14.2015.1701.13
WW_14.2020.1703.28
WW_14.2020.1704.38
WW_14.2020.1706.53
WW_14.2020.1708.56
WW_14.2020.1709.68
WW_14.2020.1711.75
WW_14.2020.1711.80
WW_14.2020.1711.81
WW_14.2020.1712.85
[8.0] ZE520KL OTA (for WW SKU only)
WW_15.0410.1712.31 (Initial release. Expect some bugs. Must be on latest Nougat build.)
WW_15.0410.1801.40
WW_15.0410.1802.44
WW_15.0410.1803.53
WW_15.0410.1803.55
WW_15.0410.1804.61
WW_15.0410.1804.62
WW_15.0410.1806.65
WW_15.0410.1806.68
credits:
@gkillershots for the WW_14.2015.1701.13 link
@spica1234 for the WW_14.2020.1703.28 and .38 links
@Eng.Raman for the WW_14.2020.1706.53, .56, .68, .75, .80, .81 and WW_15.0410.1712.31, .40, .44, .53, .61, .65, -68 links
@vaidhy2007 for the WW_14.2020.1712.85 link
@AL_IRAQI for the WW_15.0410.1803.55 link
@pop4xda for the WW_15.0410.1804.62 link
(Still looking for anyone who wish to provide FOTA links for ZE552KL.)

How about link for ZE552KL (Z012D)?

cdanthien said:
How about link for ZE552KL (Z012D)?
Click to expand...
Click to collapse
I tried to get it too, but since my phone is the z017, it can only see ota's for itself.
but the ota only patches system, boot and radio, so if someone is couraged to port, it may be not that hard.
for z017 ota links, mention me everytime a new one appears and i'll give the link for it.
if someone unlocked a z012 with unofficial method, contact me so I help you get the link to post here and help the community.

gkillershots said:
I tried to get it too, but since my phone is the z017, it can only see ota's for itself.
but the ota only patches system, boot and radio, so if someone is couraged to port, it may be not that hard.
for z017 ota links, mention me everytime a new one appears and i'll give the link for it.
if someone unlocked a z012 with unofficial method, contact me so I help you get the link to post here and help the community.
Click to expand...
Click to collapse
Give me guide for Z012D, i will guide again to my friend. Thanks

cdanthien said:
Give me guide for Z012D, i will guide again to my friend. Thanks
Click to expand...
Click to collapse
hit the update button, It'll give you the update notification, then open the folder /data/data/com.asus.dm/files/
If you don't want to continue from here, just pass me the tree.xml
If you want, open it on an editor like notepad++
then look into the <value> that has a link inside.
example: <value>http://fota.asus.com/delta_package/phone/WW_Phone/formal/14.2015.1701.8-user-WW_Phone-14.2015.1701.13-user-WW_Phone-QWWSSS/WW_ZE520KL-14.2015.1701.8-14.2015.1701.13-fota-user.zip.dd_20170317_151859.dd</value>
copy ONLY the link, put into the browser and It'll download you an dd file
ex: http://fota.asus.com/delta_package/...5.1701.13-fota-user.zip.dd_20170317_151859.dd
open this dd file on notepad ++
the <objectURI> is the link for the ota

gkillershots said:
hit the update button, It'll give you the update notification, then open the folder /data/data/com.asus.dm/files/
If you don't want to continue from here, just pass me the tree.xml
If you want, open it on an editor like notepad++
then look into the <value> that has a link inside.
example: <value>http://fota.asus.com/delta_package/phone/WW_Phone/formal/14.2015.1701.8-user-WW_Phone-14.2015.1701.13-user-WW_Phone-QWWSSS/WW_ZE520KL-14.2015.1701.8-14.2015.1701.13-fota-user.zip.dd_20170317_151859.dd</value>
copy ONLY the link, put into the browser and It'll download you an dd file
ex: http://fota.asus.com/delta_package/...5.1701.13-fota-user.zip.dd_20170317_151859.dd
open this dd file on notepad ++
the <objectURI> is the link for the ota
Click to expand...
Click to collapse
I edited ZE520KL to ZE552KL, but i received "File not found"

cdanthien said:
I edited ZE520KL to ZE552KL, but i received "File not found"
Click to expand...
Click to collapse
I tought you would do it on a ze552kl
if it were that simple, I would've done it myself

any guide how to install this? using twrp or stock recovery?

updated Tizen V2.1 here : https://forum.xda-developers.com/zenfone-3/development/rom-tizen-rom-nougat-1701-8-ze552kl-t3573231

gkillershots said:
i tried to get it too, but since my phone is the z017, it can only see ota's for itself.
But the ota only patches system, boot and radio, so if someone is couraged to port, it may be not that hard.
For z017 ota links, mention me everytime a new one appears and i'll give the link for it.
If someone unlocked a z012 with unofficial method, contact me so i help you get the link to post here and help the community.
Click to expand...
Click to collapse
thank you so much!!

Z520KL : 14.2020.1703.28
14.2020.1703.28

Thanks for uploading the new update, we are appreciate it :good:

can I update? I am rooted, no changes made except flashing TWRP

mecoromeo said:
can I update? I am rooted, no changes made except flashing TWRP
Click to expand...
Click to collapse
Make a backup first, flash stock recovery, then flash the OTA updates. Remember to flash no verity file before first boot

animaanimus said:
Make a backup first, flash stock recovery, then flash the OTA updates. Remember to flash no verity file before first boot
Click to expand...
Click to collapse
Is the flashfire app effective? I tried it and updated to the latest ze520kl update. Everything went smoothly, but, I am not sure why but my wifi was disabled. I tried clearing cache and did not work. Not sure if the app did not work correctly or if it was an issue with the latest update. That said i downgraded using the same tool and got everything working again.
I think there is an issue with the new update. What do you guys think? Did any of you guys also had an issue with the new update?
---------- Post added at 11:54 AM ---------- Previous post was at 11:51 AM ----------
spica1234 said:
Z520KL : 14.2020.1703.28
14.2020.1703.28
Click to expand...
Click to collapse
I had an issue with the update wherein my wifi was disabled and i couldn't figure out how to fix it. I rebooted, clearing cache, i even tried flashing it again and resetting everything. None worled.
I went back to the previous version and now my phone is working fine.
Did anyone else encounter this issue with this update? If so, please help me to avoid it from happening, i want to try this update

mecoromeo said:
Is the flashfire app effective? I tried it and updated to the latest ze520kl update. Everything went smoothly, but, I am not sure why but my wifi was disabled. I tried clearing cache and did not work. Not sure if the app did not work correctly or if it was an issue with the latest update. That said i downgraded using the same tool and got everything working again.
I think there is an issue with the new update. What do you guys think? Did any of you guys also had an issue with the new update?
---------- Post added at 11:54 AM ---------- Previous post was at 11:51 AM ----------
I had an issue with the update wherein my wifi was disabled and i couldn't figure out how to fix it. I rebooted, clearing cache, i even tried flashing it again and resetting everything. None worled.
I went back to the previous version and now my phone is working fine.
Did anyone else encounter this issue with this update? If so, please help me to avoid it from happening, i want to try this update
Click to expand...
Click to collapse
This is what I do follow while applying Delta OTA.
No need to flash back stock boot/recoveries and no need as well to reinstall twrp back.
Steps using FlashFire, Flash as zip/ota option:
1. Load 'UL-ASUS_Z017D_1-WW-14.2015.1701.8-user'
2. Load 'WW_ZE520KL-14.2015.1701.8-14.2015.1701.13-fota-user'
3. Load 'WW_ZE520KL-14.2015.1701.13-14.2020.1703.28-fota-user'
4. Remove tickmark from 'Inject SuperSU'
5. Add SuperSU zip, Which I've modded according to asus ramdisk of ours. Which is attached in here under my post.
Flash!
Note: FlashFire will take a minute or two to load flash, have patience.
* Reason I've to edit standard SuperSU package was for 'init.asus.rc' file in our ramdisk, which unset PATH during 'on init' event. So i added those params back in supersu's zip to append '/su/bin' in PATH

spica1234 said:
This is what I do follow while applying Delta OTA.
No need to flash back stock boot/recoveries and no need as well to reinstall twrp back.
Steps using FlashFire, Flash as zip/ota option:
1. Load 'UL-ASUS_Z017D_1-WW-14.2015.1701.8-user'
2. Load 'WW_ZE520KL-14.2015.1701.8-14.2015.1701.13-fota-user'
3. Load 'WW_ZE520KL-14.2015.1701.13-14.2020.1703.28-fota-user'
4. Remove tickmark from 'Inject SuperSU'
5. Add SuperSU zip, Which I've modded according to asus ramdisk of ours. Which is attached in here under my post.
Flash!
Note: FlashFire will take a minute or two to load flash, have patience.
* Reason I've to edit standard SuperSU package was for 'init.asus.rc' file in our ramdisk, which unset PATH during 'on init' event. So i added those params back in supersu's zip to append '/su/bin' in PATH
Click to expand...
Click to collapse
Thanks. Haven't tried it yet, but i will though.
Hi. I tried it again using the steps mentioned above and I still get the issue "wifi disabled"

mecoromeo said:
Thanks. Haven't tried it yet, but i will though.
Hi. I tried it again using the steps mentioned above and I still get the issue "wifi disabled"
Click to expand...
Click to collapse
Hi. I tried it again using the steps mentioned above and I still get the issue "wifi disabled"

mecoromeo said:
Hi. I tried it again using the steps mentioned above and I still get the issue "wifi disabled"
Click to expand...
Click to collapse
I'm facing the same issue after OTA update!
My fone is rooted too!

mecoromeo said:
Hi. I tried it again using the steps mentioned above and I still get the issue "wifi disabled"
Click to expand...
Click to collapse
Hello,
Sorry for that I got it now why it's happened.
Follow an extra step.
Extract ".28" firmware replace META-INF folder with attached below.
Zip the '.28' firmware back and rename it as 28_dummy.zip
Now follow above flashfire load 1-4 steps and as a 5th step add '28_dummy.zip' and as a 6th step as above supersu step and it'd definately work.