[Q] LCD replacement touch not working! - Nexus S Q&A, Help & Troubleshooting

Hi! I have a broken Samsung Nexus S GT-I9023. It work, just it have some big crack on the screen. I found a shop in my country, where i bouht 2 new original Samsung LCD screen. Since i changed the lcd, it works but the digitizer can't detect my fingers. I tried the second screen what i bought, but the problem is the same. If i put back the old cracked screen, it works perfectly. I visited the shop where i bouht, but they haven't more screens.
I tried some ROM, but nothing good... (2.3 / 4.04 / Cyanogen)
There is any solution for this? A newer driver? Or anything?

Anyone?

Related

Anyone found Replacement SCREEN for Acer neotouch

I cracked my screen (while it was in the pocket of my jeans). Anyone know where I can find replacement screen? Is it easy to change it?
Thanks
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Philippe_Raimo said:
I can't paste a link here so copy the number and paste it in ebay.com:
280472528404 (description: new original Acer s200 S 200 LCD Screen)
I don't know if it's easy to change..
Click to expand...
Click to collapse
Thank you very much, I will look into this one.
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Look for an original AUO H380VL01 or HTC Touch HD Sharp matrix... It's reported to be compatible with our phone
cracked screen too
baddentist said:
screen seems to work fine, installation was not too hard. However, new screen acts little weird, as once phone is off, backlight turns off immediately, but you still can see image for few seconds under normal light, pixels show through, and then it fades away.
Click to expand...
Click to collapse
i have the same thing with my acer screen (cracked in my jeans)
i buy one on ebay (i m waiting the screen)
can you tell me how to do to change the screen ? it's easy?
(sorry for my bad english)
ok it s done
i recieve my lcd screen with tools and i change it
it's easy
the screen is ok thanks for xda and all of you for existing
(sorry for my bad english)
I installed mine today -after 6 months with broken screen- I bought lcd for HTC Touch HD T8282.It is far more cheaper than the acer one and fits perfectly.ebay item 290424248491.
The HD screen is the same of NeoTouch?
I've paid 70€ for a screen for newTouch, but your proposition is more good: 50€!!
Are you sure it's good for Acer? My touchscreen is OK...
Im using it since last friday. its perfect
I received my screen today, but it's difficult to open this mobile phone!
I remove 5 screw on sur back of the phone, but i don't know what remove
There are two more screws at the left and right sides of battery house
littlbox said:
Im using it since last friday. its perfect
Click to expand...
Click to collapse
i have the same prob.... i dropped my phone and my screen blanked ....and i need another lcd .... i was thinking about what you did.... but if i'll get the HTC one the front of the mobile will be with HTC logo instead of the ACER one ...
right?
screen now fixed
I took my phone in to a local shop and they were able to change out the screen using an HTC HD screen (yes, the exact same screen as the neotouch). All is fine with the screen. They messed up the power button, but that is another story. I watched the guy do this and it seemed like a hell of a lot of intricate work to do yourself. I was happy to pay the $120. Now, I just need to return and get them to redo the power button (installed it incorrectly when putting it all back together).
For those adventurous enough- go for it, but I suggest the cheaper HD screen. And no, only the screen was replaced, which is under the touch screen/digitizer that actually has the acer logo. All looks as it did before.
I took my neotouch for a motocycleride in the rain. It didn't like it too much and now the touchfunction is messed up on parts of the screen. It all displays as it should but I can't use parts of the screen. I should be allright with just replacing the digitizer right? Ebay item Item number: 170518652337
Hi, the same for me.
Touch doesn't work on some area.
Need change digitizer or LCD?
Antenna gps
Hi someone tell me where it's possible to buy a part "gps antenna "?
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
darks1de said:
LCD Screens from HTC Touch HD and HTC Blackstone are working correct. Use these replacements instead of original
Click to expand...
Click to collapse
Hi,
this didn't work in my case. After replacing my broken original lcd screen with a new lcd display (eBay - No. 120608475783, Original HTC Touch HD LCD Display T8282), I can see that the display is switched on, but it doesn't seem to receive any signal (like you turn on your pc monitor but not the pc). Now I have two questions:
1.) If only the lcd display is broken - should I still see something on the display? Because on my broken display, I only have a black and a white part and some coloured stripes, mostly where the display is broken.
2.) Is it possible that there is something more broken on my NeoTouch or did I simply receive a broken lcd panel? It did fall off the couch, completely flat on the display.
fyi: the new lcd was missing some isolation (on the flexible part with some electrical components) which was present on my original lcd. I used some sticky tape as a replacement because it is directly positioned over some other electrical components on the phone when in place.
New Info:
Everything except from the display seems to be fine - when it is connected to my PC running "My Mobiler". But I have seen pictures of mobiles with a cracked screen whre you were still able to see (partly) the homescreen, etc. On mine, I am not able to see anything while the cracked screen is mounted - only white and black parts and some colored stripes...
Update: The delivered display was broken. Yesterday I received a new one which works perfectly!
many thanks in advance
TrashX
aih, the same story with my f1
anyway could you suggested seller lcd f1 on ebay???
i'm afraid if wrong order with lcd resolution under wvga,,,
some seller show resolution from their prodocut and a lot of seller don't do that,,
please help me..

Touchscreen is not working

Hi guys,
I have cracked my nexus 5 screen and decided to replace it by myself.
I have ordered replacement kit (frame+lcd+touchscreen+glass).
After assembly with new screen everything is working fine except touchscreen(is not responsive at all).
After switching back to old one(cracked) touch is working.
I have tried soft and hard reset, and flashing image-hammerhead-ktu84m factory rom, no result.
Is there any suggestions I can try or throw it away and buy something else ?
I would ask for a refund on the assembly if it came with a broken digitizer
#StayParanoid
I actually have the same problem. Replaced the screen myself and the touchscreen does not seem to be working. Did you manage to find a solution? In the old (broken) screen the touchscreen does continue to work (even tho the glass is cracked and fragments fell out).

[Q] Oneplus One screen replacement

Hi all,
after a drop the glass of my 16GB OPO crashed. The touchscreen doesn't work anymore, if I touch at any point of the screen nothing happens. Btw, the LCD display still works as you can see from the pic.
So:
Broken glass;
broken touchscreen;
Working LCD panel.
What's the best and/or cheaper place to buy a quality glass+touchscreen?
Thanks in advance.

Touch Calibration

Ok so ive replaced the screen on my mums N5, with one i got here.
(its not letting me post the link to where i bought the screen, i'm too new, but this is the description "US White Google Nexus 5 LG D820 D821 LCD Touch Digitizer Screen Assembly + Frame", i got it on ebay)
The installation went fine i think, i may have damaged the camera, but i biggest problem is the touch screen. It was ok after a reboot and it was not charging. But now it is totally off now. Like and inch or 2 off making it unusable. Ive been trying to find a way to calibrate the touch screen but i have not been successful. I was hopping that someone had an idea of how to fix this. The phone seems to work in all other ways, but its hard to test at the moment.
Thanks T

S2 touch don't responds

Hi to all, I have a problem with my S2. I have changed the LCD and now don't work the touch. I have tried to change with my old screen and also don't work. Someone know how to repair this problem?
Where did you get the screen LCD replacement?

Categories

Resources