Hey I am new to rooting Android phones and ever since S-OFF and loading a custom ROM I am getting terrible signal stength, not receiving calls and having terrible reception making calls.
My question is what Radio and RIL should I use for Telstra Australia? or is there another possible problem/fix for this issue?
Phone: HTC Sensation Original Telstra
Custom ROM: Android Revolution HD 6.6.7 XE with Beats Audio
Android: ICS
Radio: 11.69.3504.00U_11.22.3504.07_M
I was running Gingerbread stock and had excellent signal almost all the time.
AndrewsPanda said:
Hey I am new to rooting Android phones and ever since S-OFF and loading a custom ROM I am getting terrible signal stength, not receiving calls and having terrible reception making calls.
My question is what Radio and RIL should I use for Telstra Australia? or is there another possible problem/fix for this issue?
Phone: HTC Sensation Original Telstra
Custom ROM: Android Revolution HD 6.6.7 XE with Beats Audio
Android: ICS
Radio: 11.69.3504.00U_11.22.3504.07_M
I was running Gingerbread stock and had excellent signal almost all the time.
Click to expand...
Click to collapse
I don't have any problem with this ROM, but since I installed ARHD v6, I'm not getting good signal. Before flashing it, I had Gingerbread and ICS, and the signal was perfect... :S
Probably, changing the Radio and RIL fixed it, but I don't know which ones are better for your country.
NeO_ReVoLuTiOn89 said:
I don't have any problem with this ROM, but since I installed ARHD v6, I'm not getting good signal. Before flashing it, I had Gingerbread and ICS, and the signal was perfect... :S
Probably, changing the Radio and RIL fixed it, but I don't know which ones are better for your country.
Click to expand...
Click to collapse
Ok so what is ARHD and what radio and RIL did you use to fix the problem?
AndrewsPanda said:
Ok so what is ARHD and what radio and RIL did you use to fix the problem?
Click to expand...
Click to collapse
I didn't fix the problem xD I want to try with another radio and ril that ARHD recommends, but I don't have time to do it... :-(
Sent from my HTC Sensation XE with Beats Audio using xda app-developers app
The Telstra network is 850Mhz which might be the problem, I think.
It would be useful if perhaps someone with stock Vodafone ICS in Australia could post their radio version, because Vodafone also runs a 850Mhz network here.
ToL9a said:
The Telstra network is 850Mhz which might be the problem, I think.
It would be useful if perhaps someone with stock Vodafone ICS in Australia could post their radio version, because Vodafone also runs a 850Mhz network here.
Click to expand...
Click to collapse
Hi,
Have you tried asking in the Radio/Ril Thread
malybru said:
Hi,
Have you tried asking in the Radio/Ril Thread
Click to expand...
Click to collapse
I would have originally but I cannot post there being a new member and all.
Related
At&t hasnt even announced their plans to update the Inspire 4G and i was thinking, since the Desire HD is pretty much the exact same phone, can i flash the Desire HD official gingerbread rom? im asuming ill lose the 3g/4g capabilities but that can be solved by flashing the AT&t radio after i flash the update, right?
Chad_Petree said:
At&t hasnt even announced their plans to update the Inspire 4G and i was thinking, since the Desire HD is pretty much the exact same phone, can i flash the Desire HD official gingerbread rom? im asuming ill lose the 3g/4g capabilities but that can be solved by flashing the AT&t radio after i flash the update, right?
Click to expand...
Click to collapse
Radio firmware doesn't have to do with 2G/3G loss on the Inspire/DHD, it is the software in the the ROM (RIL combined with APN). If the ROM doesn't have the correct settings it will not have a data connection at all... Also, flashing a pure DHD ROM will cause major sound issues on your Inspire. I would just recommend using one of the 2.3 ROM's in the dev section, most of them are based on the official 2.3 release anyway.
You shouldn't have any problems, as long as you match your radio with the RIL and apply the dhd to inspire patch somewhere on these boards.
Sent from my Desire HD using XDA App
I've flashed Desire Rom's without any problems just use LeeDroid DHD to Inspire Patch to apply turboliniums tinny audio fix.
chbearsrock said:
You shouldn't have any problems, as long as you match your radio with the RIL and apply the dhd to inspire patch somewhere on these boards.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
and how do i match the ril? what inspire patch? the sound patch?
id10terrordfw said:
Radio firmware doesn't have to do with 2G/3G loss on the Inspire/DHD, it is the software in the the ROM (RIL combined with APN). If the ROM doesn't have the correct settings it will not have a data connection at all... Also, flashing a pure DHD ROM will cause major sound issues on your Inspire. I would just recommend using one of the 2.3 ROM's in the dev section, most of them are based on the official 2.3 release anyway.
Click to expand...
Click to collapse
The thing is there's no stock 2.3.3 on these forums :/ , so the trouble is the ril, ive had no problems reactivaating the apn in the past
Chad_Petree said:
and how do i match the ril? what inspire patch? the sound patch?
The thing is there's no stock 2.3.3 on these forums :/ , so the trouble is the ril, ive had no problems reactivaating the apn in the past
Click to expand...
Click to collapse
Use the steps in my method in development after flashing, it basically resets your radio to AT&T specs on any Sense-based ROM's. RIL, Radio, APN, telephony.db. All there.
Edit: make sure to to a rooted stock ROM, NOT THE RUU!!
Re-Edit - Use this one. It is pretty darned stock.
im getting more confused , the gingerbread roms on the inspire 4g development forums are based on the desire hd roms but already have the ril and the at&t raido and apn? or are jsut the desire hd roms and we have to flash the ril and the radio after we flash the rom?
And the screwed sound you mention is no sound AT ALL or the tiny audio?
Chad-
Slow down. Do some reading. Don't jump into it too fast and you will be fine. Read-Read-Read.
Chad, this as close to stock GB Sense as you can get. All you have to do is flash the rom nothing else. And your phone will actually think its an Inspire 4g not a Desire hd.
http://forum.xda-developers.com/showthread.php?t=1057060
US,Europe and HTC(carrier independent) stock Roms are all regarding integrated specific packages, but what about the radio versions that vary in each ?
will it affect the device if i installed radio 2.08(europe) or 1.58(us) on my sensation 4G ?
and if am installing a custom roms which radio should be installed(if not recommended in the rom thread) ?
what will happen if i installed a US stock rom with Europe radio ?
also which is the best STOCK RUU ?? US,Europe or the HTC (Europe,Asia, carrier independent)
yacbos said:
US,Europe and HTC(carrier independent) stock Roms are all regarding integrated specific packages, but what about the radio versions that vary in each ?
will it affect the device if i installed radio 2.08(europe) or 1.58(us) on my sensation 4G ?
and if am installing a custom roms which radio should be installed(if not recommended in the rom thread) ?
what will happen if i installed a US stock rom with Europe radio ?
also which is the best STOCK RUU ?? US,Europe or the HTC (Europe,Asia, carrier independent)
Click to expand...
Click to collapse
hey yacbos as far as i have seen a lot of the roms are EU based so the developer suggests the specific EU radio to be used with their rom ie 10.15.9035.x.x. a lot of US users have confirmed that the stock or TMOBU radio works better here in the US. i have used ARHD roms since rooting my Sen but have kept the original radio 10.14.9025.01_m and recieve better service using it. just look up the specific radio for ur area and flash the corresponding RIL with it.. there are posts in the development section with radio and RIL zips info. hope this helps a little can be confusing[ http://forum.xda-developers.com/showthread.php?t=1200403 look under radios/U]
K im in mea on vodafobe netowrk updatrd to. 2.0.8 leaked europe rom which updated the baseband to 11.59
My device is unlocked s-off yet tried to flash back to 10.58 says successfull but nothing actually happens device remain on 11.59
sent from HTC sensation 4G
Android revolution HD 3.67
XDA premium
superman63 said:
hey yacbos as far as i have seen a lot of the roms are EU based so the developer suggests the specific EU radio to be used with their rom ie 10.15.9035.x.x. a lot of US users have confirmed that the stock or TMOBU radio works better here in the US. i have used ARHD roms since rooting my Sen but have kept the original radio 10.14.9025.01_m and recieve better service using it. just look up the specific radio for ur area and flash the corresponding RIL with it.. there are posts in the development section with radio and RIL zips info. hope this helps a little can be confusing[ http://forum.xda-developers.com/showthread.php?t=1200403 look under radios/U]
Click to expand...
Click to collapse
Just to chime in, I found the 10.15 radio + Ril 169 combo to give me the best combination of speed and reception on TMOUS here in Philadelphia after weeks of testing.
For some reason when i flash previous radio it doesnt apply
sent from HTC sensation 4G
Android revolution HD 3.67
XDA premium
yacbos said:
For some reason when i flash previous radio it doesnt apply
sent from HTC sensation 4G
Android revolution HD 3.67
XDA premium
Click to expand...
Click to collapse
From another post it said that the baseband version you changed to is hidden behind the original. You would have to go settings>about phone>software information>more and the baseband version will be there.
Hope that helps.
Well guys, so here is the issue, i had darkside and my phone just kept switching between the 4g, 3g, and 2g signal within seconds of the switch. Same goes with virtuous unity. I thought it might be the radio, so do you guys have any suggestions?
THANKS
P.S. i am on stock right now bc i found this problem so annoying
i'm on panache radio right now, no issues AT ALL
Stock?
So is that stock radio because thats what i am, do you have any suggestions on other radios?
THEindian said:
So is that stock radio because thats what i am, do you have any suggestions on other radios?
Click to expand...
Click to collapse
no, panache radio is a GINGERBREAD radio. i would recommend all the gingerbread ones, specially the new one that just came out
saranhai said:
no, panache radio is a GINGERBREAD radio. i would recommend all the gingerbread ones, specially the new one that just came out
Click to expand...
Click to collapse
where is the new radio ? any links ?
Sent from my Mytouch 4G Running Capychimps Sense 3.5 rom (v.4.0)
jjbat87 said:
where is the new radio ? any links ?
Sent from my Mytouch 4G Running Capychimps Sense 3.5 rom (v.4.0)
Click to expand...
Click to collapse
there's a radio thread in the development section.
saranhai said:
there's a radio thread in the development section.
Click to expand...
Click to collapse
yeah i found it , thanks
Sent from my Mytouch 4G Running Capychimps Sense 3.5 rom (v.4.0)
Is there a possibility of bricking and what if it doesnt help? Do i revert back?
Ofcourse there is risk of bricking.. but if you do it the way its mentioned in the post you are good.. i change radios all the time..
If you are too scare to try changing the Radio then try the MIUI ROM.. Its the best I found for 4G signal on my phone.
If I help.. press the thanks button..
Sorry to be a bother but I seem to have this problem.
I am unable to connect to any other WiFi network other than my previously setted up WiFi address during First Boot. Could you help me troubleshoot about this problem?
-cheers
I have a similar issue, mine loses wifi connection often since 6.2.1 XE, the wifi signal is at full, but fails to obtain IP Address most of the time except on the first wifi i set it up with, most likely another one of those bugs HTC is working on so someone can take a copy home and give it to us... cant wait for full ICS from HTC source, dont get me worng, the current RUU leaks are good, but not perfect.
HTC Hurry up please, Me with my Sensation and my Girlfriend with her EVO 3D want ICS without bugs...
im also in arhd xe version.but havent got any wifi issue
Sent from my HTC Sensation XE with Beats Audio using XDA App
I have a feeling it has to do with the ROM.
I have flashed SebastianFM's kernels, new & old radios, and I still seem to have the same problem.
It is definitely not due to the Firmware since I have flashed multiple other ROM's but only ARHD seem to have the problem.
What I'm suspecting is that this problem is due to the mismatched Firmware and ROM since the rom is based on 3.25 and the firmware is 3.24. But who am I to say that.
Hope mike has a fix for that soon~ :x
then try it by flashing 1.5ghz kernel
Sent from my HTC Sensation XE with Beats Audio using XDA App
I have flashed both kernels. Even the ones on Sebastian's thread.
try WiFix (search google for the xda thread for it) or this http://forum.xda-developers.com/showthread.php?t=1436683
I tried prior to your post but I still seem to have the same problem. Oh well...
I am running Jellytime RC11 on my HTC Inspire 4G on AT&T. What is the best/newest radio for me to use?
Quiglesigles said:
I am running Jellytime RC11 on my HTC Inspire 4G on AT&T. What is the best/newest radio for me to use?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1106324
Top of the second post.
I believe a newer one is around somewhere, but that one works for me.
Quiglesigles said:
I am running Jellytime RC11 on my HTC Inspire 4G on AT&T. What is the best/newest radio for me to use?
Click to expand...
Click to collapse
With Radios you will get different opinions on them, best thing to do is try them and see what works for you. what works good for me may not work good for you.
Does anyone know what the newest one is?
Also, do I need to flash a RIL along with the radio? Or just the radio?
Quiglesigles said:
Also, do I need to flash a RIL along with the radio? Or just the radio?
Click to expand...
Click to collapse
Just the radio. The RIL is for EDIT: Sense ROMs, and I think it's not even necessary for JB (if there was a Sense JB ROM).
EDIT: found newest radio from marsdta in the radio thread linked above. http://forum.xda-developers.com/showpost.php?p=29605945&postcount=1015
But if the RIL is for non-sense ROMs, isn't Jellytime a non-sense rom?
Quiglesigles said:
But if the RIL is for non-sense ROMs, isn't Jellytime a non-sense rom?
Click to expand...
Click to collapse
Oops. RIL is for Sense ROMs. I edited my earlier post. Sorry about that.
a noob question
what does it matter to change radio, why do you change it? signal improvements maybe ?
galdoren said:
a noob question
what does it matter to change radio, why do you change it? signal improvements maybe ?
Click to expand...
Click to collapse
Better battery and better signal mostly. Especially with sense ROMs certain rils work better with certain radios. Also some radios are not compatible with aosp or newer rils.
Sent from my Inspire 4G using xda premium