Related
this script automates the process of partitioning a sdcard on your android device. it should work fine for all sizes/types of sdcards, but since i can't test all sizes/types of sdcards, we'll have to see.
if you are running into problems with the script, post the log file(located at /data/sdparted.log) when asking for help.
big ups to cyanogen (parted and upgrade_fs) and Denkai (upgrading to ext4).
i welcome all comments, questions & suggestions, related to the script. this is NOT a general q&a.
read the ENTIRE post BEFORE asking questions, please.
to manually partition your sdcard see my other thread.
DISCLAIMER: i take no responsibility for what happens to you, your phone, sdcard, data, sanity, etc if you use this script. remember to backup your sdcard to your pc before you begin. this script has the potential to COMPLETELY WIPE your sdcard!
##########################
shameless promotion:
sdparted can also be found in amon_ra's recovery and natalic's android toolkit.
##########################
features:
-automated partition of sdcard using parted
-upgrading to ext3/ext4
-downgrading to ext2
-interactive mode
-supports units (M and G)
-supports floating point partition sizes (ie. .5G=512M)
-automatic logging to /data/sdparted.log
##########################
requirements:
android phone with proper utilities(cm-recovery-1.4, amon_ra's recovery)
sdcard <--class 6 recommended(adata makes good ones...they max out the g1 hw in terms of speed)
adb
fingies
##########################
Code:
sdparted v0.6 created by 51dusty
if you use this script in your work, please give some credit. thanks.
requirements: cm-recovery-v1.4
usage: sdparted [options]
options:
--fatsize|-fs SIZE[MG] set the size of the fat32 partition to <SIZE>.
default=total sdcard size - (ext + swap)
--extsize|-es SIZE[MG] set the size of the ext partition to <SIZE>.
default=512M
--swapsize|-ss SIZE[MG] set the size of the swap partition to <SIZE>.
if set to 0, no swap partition will be created.
default=32M
--extfs|-efs TYPE set the filesystem of ext partition to <TYPE>.
valid types=ext2, ext3, ext4
default=ext2
--upgradefs|-ufs TYPE upgrades existing ext partition to <TYPE>.
this operation will NOT wipe your sdcard and
cannot be used with any partition creation options.
valid types=ext3, ext4
--downgradefs|-dfs TYPE downgrades existing ext partition to <TYPE>.
this operation will NOT wipe your sdcard and
cannot be used with any partition creation options.
valid types=ext2
--interactive|-i interactive mode
--help|-h display this help
--printonly|-po display sdcard information
--silent|-s do not prompt user, not even initial warning.
examples:
sdparted creates swap=32M ext2=512M fat32=remaining free space
sdparted -efs ext4 creates swap=32M ext4=512M fat32=remaining free space
sdparted -fs 1.5G -efs ext3 creates swap=32M ext3=512M fat32=1536M
sdparted -es 256M -ss 0 creates no swap ext2=256M fat32=remaining free space
sdparted -ufs ext4 upgrades ext partition to ext4
##########################
need to backup your ext partition?
the following commands will backup/restore your ext partition to/from a folder named sdbackup in your current directory. these must be run while phone is booted, not recovery.
to backup your ext partition: adb pull /system/sd/ %CD%\sdbackup
to restore back to sdcard: adb push %CD%\sdbackup /system/sd
##########################
to run from computer:
1. download sdparted.txt below to computer
2. connect g1 via usb
3. boot into cm-recovery-v1.4, goto console(alt-x)
4. at your windows cmd prompt type: adb push /path-to/sdparted.txt /sbin/sdparted
5. then type: adb shell chmod 755 /sbin/sdparted
6. to run type adb shell and hit enter.
7. you can now run script (ie. sdparted -efs ext4).
to run w/o computer:
1. download sdparted.txt below to root of sdcard. (get downloadcrutch if needed*thnx lycoln)
2. boot into cm-recovery-v1.4, goto console(alt-x)
3. at # prompt type: mount /sdcard
4. then, mv /sdcard/sdparted.txt /sbin/sdparted
5. then, chmod 755 /sbin/sdparted
6. you can now run script (ie. sdparted -efs ext4).
you CANNOT run this script from terminal app.
##########################
if the script crashes or you receive an error:
immediately pull the log to your computer(using adb pull /data/sdparted.log sdparted.log), b/c the log will not be there after a reboot. send me the log when reporting errors, please.
##########################
changelog:
changes in v0.6
*new feature=interactive mode
*tweak user abort function for those with itchy fingers
changes in v0.5.3
*remove initial warning(kinda pointless if there is another before you wipe)
*clean partition table handling code
*general code cleanup/consolidation in anticipation of new features
changes in v0.5.2
*handling of "partition 1 may not be aligned to cylinder boundaries", fixing "sh: -gt: argument expected" and related phenomena (ie. sdparted trying to partition using negative numbers ) reported by midtoad
changes in v0.5.1
*slight change to logging(so slight it only gets a .1), fixing "/sbin/sdparted: line 5: .//sbin/sdparted: not found"
changes in v0.5
*new feature=floating point partition sizes
*new feature=downgrade ext filesystem (ext3->ext2 ONLY, for now)
*fix some crappy programming
changes in v0.4
*unmount all partitions before operations, fixing "Error: Partition(s) on /dev/block/mmcblk0 are being used".
*remove some useless code
changes in v0.3
*new feature=logging
*new feature=units
*new feature=print card info
changes in v0.2
*add cm-r-v1.4 check to prevent running in 1.3.1
##########################
todo items:
-downgradefs support for ext4
##########################
Excellent!
One of the easiest things Ive done in a while. Worked great!
great.
i'm new to android, so i have a question.
I'm guessing when you go to settings and eject SD card, it only unmounts the FAT32 partition, right?
So does that mean the only safe way to eject the card is shutting down?
great job!
SyXbiT said:
great.
i'm new to android, so i have a question.
I'm guessing when you go to settings and eject SD card, it only unmounts the FAT32 partition, right?
So does that mean the only safe way to eject the card is shutting down?
great job!
Click to expand...
Click to collapse
That depends which ROM you are running and how it's set up. CyanogenMod for example, will automatically use the Ext partition for Apps-to-SD if it finds one. Ejecting a card while the phone is using it as part of its internal memory would be a Bad Thing™.
If you are running the stock firmware, it would be safe to remove the card after ejecting it in settings.
Could anyone at their convenience post directions for using this with console,
and where to place text attached? Funny, I've done this the manual way but don't know the simple things.
Thanks in advance for your work and patience. =)
Figured this one out!
Can you tell me how exactly to run this script? I ran this in recovery and i get sdparted not found.
sacredsoul said:
Can you tell me how exactly to run this script? I ran this in recovery and i get sdparted not found.
Click to expand...
Click to collapse
where did you place the file? did you run chmod?
excellent! Great job dusty
sacredsoul, Make sure you have the latest Cyanogen's Recovery Image, which I used 1.4. I got the same error using 1.31. I then updated to 1.4 and it worked perfectly. great Post 51dusty.
i am tryin to do this...hw do i get in recovery mode and wat exactly im i typin?..i hav a 4gig
Just wanted to chime in and say this script worked beautifully for me on a 16gb card.
Thanks!
I don't get it, am I mounting first, placing the file on the SD, then rebooting into recovery? The instructions make it sound as if I can just boot into console and pull it off my machine. Many people might find that confusing.
ctheory83 said:
I don't get it, am I mounting first, placing the file on the SD, then rebooting into recovery?
Click to expand...
Click to collapse
...i don't say to mount anything.
ctheory83 said:
The instructions make it sound as if I can just boot into console and pull it off my machine.
Click to expand...
Click to collapse
actually, you can...but you push instead.
51dusty said:
to install from computer, download, boot into cm-recovery-v1.4, goto console, and adb push /path-to/sdparted.txt /sbin/sdparted, then adb shell chmod 755 /sbin/sdparted. you can now run the script from adb(in recovery) or from g1 recovery console.
Click to expand...
Click to collapse
i will edit post to make installation less "confusing"...done.
Hey dusty i been struggling with this for like a week now and finally decided to post! so i got the adb thing running on my pc, windows 32-bit and it finds my device when i put the command "adb devices", so that far im fine but then your instructions tell us to boot the phone into recovery console and the type "adb shell" the result comes up "no adb found", at this point i have tried it with my phone plugged into the pc and unplugged without mounting it from the G1... please help what am i doing wrong im really confused! thanks!
The script is great i finally figured it out how to work this thing, but i just a bit of an issue now, when i keep installing apps my internal storage is also getting reduced a bit, i have installed about 100mb of apps and my internal storage reduced to 67 from 70mb, i have already cleared cache, using the app to move it to sd card, and also turned my phone off and took out the battery and rebooted, but its standing at 67mb... does this possibly have anything to do with protected apps??? please help!!
adb not found
hi,
it says adb not found, what am i doing wrong ?.
so my problem is that im not quite sure on what you mean by the path in the following command
adb push /path-to/sdparted.txt /sbin/sdparted
i know that you mean where ever the file is located but, for instance i just put mine in the c drive, so it should be adb push /c drive/sdparted.txt /sbin/sdparted
what is the correct way that should look?
edit: ok so i found my problem, i tried to install it from the adb shell, that was wrong, and this is the string in windows cmd i used for sdparted located just on the c drive
"adb push %cd%\sdparted.txt /sbin/sdparted" it then says the speed it was written, etc. does that mean it is correctly installed? from here, im not too sure how to go about setting up my partitions, again im very new to this.
you can now run the script from adb(in recovery) or from g1 recovery console.
Click to expand...
Click to collapse
Everything went okay, only the last stap with running from adb i dont understand.
What command is that ?
CoopZor said:
Everything went okay, only the last stap with running from adb i dont understand.
What command is that ?
Click to expand...
Click to collapse
i have edited first post to clarify how to run.
to run, from adb:
1. boot into cm-recovery-v1.4, goto console(alt-x)
2. at windows prompt, type adb shell and hit enter.
3. once connected via adb, you can now run script (ie. sdparted -efs ext4).
Click to expand...
Click to collapse
NOTE: This is a work in progress. While I have completed this guide myself SEVERAL times to ensure accuracy, It is possible that typos or errors in understanding exist. Please use at your own risk, and expect NOTHING from me. I will do my best to update this guide and improve the formatting as I find time. Feel free to leave feedback!
I cannot stress this enough: always have backups of any important information. While we may not be able to do full image-based backups until after root, you can still make sure we aren't deleting needed data. While yes, Google should hold your most important data and allow you to sync at any time, what would you do if Google went down? And I've even had trouble using the "Offline" function for some of the Apps. Therefore, Make a copy of everything on your SD card and read this excellent guide from Lifehacker about how to backup Google Apps data: Lifehacker
You will need an SD card. I recommend AT LEAST an 8GB Class 4. Most actually recommend a Class 6 for use with apps2sd, but I just wanted to let you know that it would still work with a Class 4. For those unaware, apps2sd allows you to save internal phone memory by placing after-market applications onto your SD card. Most users notice a speed benefit from this.
If you would like to purchase a Class 6 SD card, you can get a one here with three sizes available (4GB, 8GB, 16GB):
A-DATA MicroSDHC Class 6 Turbo With SD Adapter
To ensure the best possible load, perform a factory reset, and WIPE your SD card!
Code:
Menu > Settings > Security > Factory data reset > Reset phone > Erase everything
TRUE FACTORY RESET (UN-ROOT)
If you, like me, have already rooted and are trying to perform this process over again, you will unfortunately have to download the original ROM and flash it in Windows.
Download: RUU_Hero_C_Sprint_1.29.651.1_signed_release.exe
Run in Windows (I used XP through VMWare Fusion), and this will return the phone to the TRULY factory loaded state. Any other Factory data reset will simply reload the last ROM image saved, which, if you rooted and loaded MoDaCo, would be MoDaCo. I am encouraging you to follow this process to avoid any problems that may exist while the phone is rooted or loaded with the unofficial ROM. And even if you perform this process as a first-time rooter, it certainly wont hurt!
ROOT HERO [MAC]
(This is the process that allows modifications to occur on your phone):
The guide I follow and can verify is this:
Rooting CDMA Hero [Mac]
I do not use Windows as a primary platform, so I would recommend following this guide if you are on Windows:
How to root the CDMA Hero (DETAILED Windows guide)
You should be able to return to this guide after you have successfully completed the root process on Windows. Continue from the section "NANDROID BACKUP" below.
Per the purpose of this guide, I will detail my exact steps from the "Rooting CDMA Hero [Mac]" post. Thanks ajones7279!
Plug in your phone
Download Android SDK: http://developer.android.com/sdk/index.html
Unpack, Rename the extracted folder to "AndroidSDK" (This is case sensitive!), and Move it to "Applications" (I consider the Android SDK a set of applications.)
Open TextEdit, Click Format>Make Plain Text, then copy and paste the following:
Code:
export PATH=${PATH}:/Applications/AndroidSDK/tools
Save as: ".bash_profile"
On Phone: Go to Settings > Applications > Development>USB Debugging and make sure the option is checked.
On your Mac: Download asroot2: http://zenthought.org/tmp/asroot2
Save this file into: /Applications/AndroidSDK/tools
Open Terminal and run the following commands (You can copy and paste):
Code:
cd /Applications/AndroidSDK/tools
adb push asroot 2 /data/local
adb shell chmod 0755 /data/local/asroot2
adb shell
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4775 su
exit
exit
At this point, the phone has root access.
Download: http://rapidshare.com/files/303797523/recovery-RA-heroc-v1.2.3.img
Save this file into: /Applications/AndroidSDK/tools
Go back to your terminal and type:
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
adb shell
su
flash_image recovery /sdcard/recovery-RA-heroc-v1.2.3.img
exit
exit
adb shell reboot recovery
Now, the phone will reboot into recovery mode. To preserve our freshly rooted state, we will make a Nandroid backup.
NANDROID BACKUP
*NOTE: These steps assume that you have already entered Recovery Mode on the phone through Terminal "adb shell reboot recovery" or the "Quick Boot" app.*
On phone: Using the trackball, scroll down and select "Nandroid v2.2 backup". This will create a backup of the phone in its freshly rooted state to your SD card, under the nandroid directory.
After it completes the backup, we want to make sure that we have the backup "backed up" by copying it to our Mac (Just in case anything happens to the SD card!).
Select "USB Mass storage on"
After your SD Card appears, copy the contents of the "nandroid" folder to anywhere you wish on your Mac (You are using Time Machine right?)
Once the copy is complete, eject the sdcard in mac and select "USB Mass storage off" on the phone.
NOTE: Nandroid does not backup the contents of your SD card. If you don't want to lose what's on your SD card, MAKE A BACKUP COPY!
From this point forward, if you do something that seems to really mess with the phones functionality, you can simply go back to your Nandroid backup!
RESTORE NANDROID BACKUPS
Select "Nandroid v2.2 restore" *THIS WILL ERASE EVERYTHING ON YOUR PHONE*
Your phone will be returned to the condition it was in as of the last Nandroid backup. You can control which backup is restored by deleting the unwanted, time-stamped folders within the "nandroid" directory on your SD card. If you leave only one time-stamped backup folder, that is the backup that will be restored.
Note that this will leave the custom Recovery ROM we loaded (recovery-RA-heroc-v1.2.3.img) in place.
I actually perform a Restore after every Backup. While this takes extra time, you know your Backup is intact and not corrupted in any way!
If you are looking for a complete factory reset, you will need to scroll up to "TRUE FACTORY RESET (UN-ROOT)"
PREPARE SD CARD FOR APPS2SD (A2SD)
For those unaware, apps2sd allows you to save internal phone memory by placing after-market applications onto your SD card. Most users notice a speed benefit from this.
Select "Wipe SD: fat32+ext2+swap" *THIS WILL ERASE EVERYTHING ON YOUR SDCARD*
Select "USB Mass storage on"
The mounted drive should now be empty. Double-check that it was partitioned correctly by opening Disk Utility and verifying 3 partitions on the sdcard: NONAME, disk1s2, and disk1s3. Close Disk Utility.
LOAD Unofficial MoDaCo 1.2c Core ROM
Forum Post: Unofficial MoDaCo 1.2
Download: Unofficial MoDaCo 1.2c Core
Save this file into: your SD card. (the root of your SD card, probably named "NONAME" if you didn't change it. You can change it to whatever you want though.)
Save the file as: "update.zip" (Or rename it)
Eject your sdcard and Select "USB Mass storage off"
Select "Apply sdcard:update.zip"
Select "Reboot system now"
If it successfully loaded, you now have a fresh load of the Unofficial MoDaCo 1.2c ROM! Congrats!
I would recommend that you create another Nandroid backup. Scroll back up to "NANDROID BACKUP" and follow the steps over again and come back to this point.
Now you are ready for the workarounds!
Guide: Workaround Issues (Unofficial MoDaCo 1.2c)
Why'd you make another guide?
nice guide man, no need to respond why you made another guide, the more the merry, nicely detailed as well
Shhhhhh.
I was just curious because there are like six...
I made another guide because while many of the forum posts acomplish bits and pieces, my guide provides the overall picture. Root, ROM, and Backup. And my upcoming "Workarond Issues" guide will collect scattered information in a similar fashion.
I find it ironic that I thanked you for your contribution and you find this guide excessive. Would you prefer that I removed the guide?
No not at all. Yours is nice and concise. There's just a lot, that's all. That's why I said it would be nice if a moderator could have merged all the ones that were already written at the end of mine. Didn't mean any harm.
Ah, I see what you mean. To be honest, I am also making this guide for self reference. If most all of the information I need is together its easier to help myself as well as my friends and the community. Thanks again for all your contributions.
Just to raise awareness, Nandroid does NOT back up your apps if you are using AppsToSD as in MoDaCo. You must back up your apps separately.
True, thanks for the heads up. I'll work on a separate guide that details how to backup your other apps. I believe that anything after-market can be backed up and restored through ASTRO though, and this is much easier for most than adb and Terminal commands (push/pull).
The whole 1.56.651.2 Firmware update is also making me wait to post any further guides, as some of my worksarounds may prove useless. It looks like we still have the Apps Renaming and Reverting issue though, and I didn't see the Sprint admin adress such issues specfically.
?
ok i did the update to the hero. and now found out about rooting(im new to all this) do i run that program you put in the beginning with windows? and then does that rom resolve the issue with battery with sms and other things the OTA update fixed? or should i get another rom or .img idk what to call it really and what does RUU stand for?
Alright,
A couple things to add to this guide, for the complete noob, as I can try to explain it a little more clear.
This should be done prior to doing anything within the guide.
First, connect your phone to your computer and mount your sd card. This can be done by connecting the usb cable, then on your phone, drop down the menu and chose, connect to p.c., Mount SD card. Make a folder and backup your entire sd card to this folder. Once done, delete everything off the card. if you don't, you will run into format and partitions errors later in the guide.
Eject the sd card on the computer, and end usb sharing on the phone. remove the USB cable from the computer.
Next, on the phone Go to Settings > Applications > Development>USB Debugging
Make sure that USB debugging is NOT CHECKED. If its checked later in the guide you will run into errors pushing the files onto the phone.
At this point you can start the guide from the beginning, under the main heading Root Hero [MAC]
I am running OSX 10.6.2 so i ran into a couple of issues.
Next. Under the part where you have to create the .bash file. This file should be saved in your user folder.
/Users/USERNAME where USERNAME is the name of your user account.
For instance my User account is Hamspiced so my user folder is:
/Users/Hamspiced/
when saving the file, uncheck "if no extension is provided, use .txt".
Next, I couldn't copy paste the code because it wasn't parsed properly. This is what i had to do.
And this should be a direct copy paste into terminal. If you don't know how to access terminal click the spyglass in the upper right hand of the screen, and type in terminal. then you should be able to directly copy paste this text.
Code:
cd /Applications/AndroidSDK/tools
./adb push asroot2 /data/local
./adb shell chmod 0755 /data/local/asroot2
./adb shell
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4775 su
exit
exit
As stated you should have root access on the phone. you can verify this by downloading Terminal emulator from the Market, then running the app. Once inside the app if you hold Menu, you should bring up the onscreen keyboard. if you type in "su" (stands for super user) it will change the prompt from $ to #. If yours does not change, start over, something went wrong. If it did change then you can proceed to the next part of this guide.
Next the guide is trying to put the recovery Image to your phone. This doesnt restore your phone, it just puts the recovery portion to it, and it allows you to do all the cool things to your phone, like allow you to create backups, restore backups, and load customs roms.
again i ran into issues with parsing the correct format so these are copy pastes from terminal.
Code:
./adb push recovery-RA-heroc-v1.2.3.img /sdcard/
./adb shell
su
flash_image recovery /sdcard/recovery-RA-heroc-v1.2.3.img
exit
exit
adb shell reboot recovery
If you get an access denied error pushing the recovery image, its because you had debugging turned on prior to connecting your phone to the computer. it must be off, then turned on once the phone is connected.
This will result in headaches, and endless google searching with no results.
Follow the rest of the guide regarding the Nandroid backup this backs up the entire phone settings. you want to save the raw phone backup as well as the backup after you load the rom. both are incredibly important!
Prepare SD Card for Apps2sd….
If when you checked Disk Utility and your SD card didnt partition properly follow these steps.
You must erase everything on your sd card for these steps to work. I ran into errors creating the partition. What i had to do was in the recovery mode chose factory recovery. when the phone restarted i had to go to Settings>Security>Factory Data Reset.
This restored EVERYTHING. THe phone, Sd Card, Etc. Everything was lost, however since in the begining, we made a backup of the SD card, and then we made a backup of our phone, we are fine.
Restart the phone in recovery mode once this finishes and restarts. (Hold Home and Power to turn on)
Next chose Part SD: fat32+ext2+swap this will partition the card properly. Then choose restart phone.
Once the phone restarts, we have to go through the normal steps that we did once we first received the phone for its first bootup. connect it to the computer, transfer over the Nandroid backup that should be saved from the first time you saved it on your phone. then restart the phone again in recovery mode.
Now you need to restore the nandroid backup. since you transferred it over, its the only nandroid backup there is, it will restore the phones origional settings. from here you can load the official MoDaCO rom fine on the SD card that is now formatted properly.
These are about all the issues and resolutions i ran into. Hopefully it helps someone else.
Guess it's subjective. I think I haven't turned off USB Debugging since shortly after I got the phone and didn't run into any problems. It's always on before I plug it in and I haven't ran into any errors while pushing a file to my sd card. Also didn't erase my sd card before I formatted (did back it up though of course) and everything went smooth. Dunno. It's always good to hear from diff people though. Also just edited my thread, thanks for the heads up.
need help rooting htc hero from sprint
i have 1.5 firmware bb version is 1.04.01.09.21 kernel version 2.6.27-533ce29dhtc [email protected] build number1.56.651.2 cl85027software 1.56 cant get root on this device can someone please help me
quis5550 said:
i have 1.5 firmware bb version is 1.04.01.09.21 kernel version 2.6.27-533ce29dhtc [email protected] build number1.56.651.2 cl85027software 1.56 cant get root on this device can someone please help me
Click to expand...
Click to collapse
Try here
http://forum.xda-developers.com/showthread.php?t=581686&highlight=root+mac
First, excellent guide! Personally, I used Universal Androot (snipurl.com/uaroot) to root my Hero, but this was a huge help in getting the SDK installed!
I'm running into a problem while trying to do the Nandroid backup. When I try to flash the recovery image, I get the following error message....
AJBlue98$ ./adb shell
$ cd /sdcard/
$ su
# flash_image recovery recovery-RA-herocv1.6.2.img
flash_image: not found
Click to expand...
Click to collapse
I even try the command with the leading "./" and I get essentially the same thing...
# ./flash_image recovery recovery-RA-herocv1.6.2.img
./flash_image: not found
Click to expand...
Click to collapse
I'm running the latest official Sprint 2.1 ROM on my Hero and Terminal on Mac OS X Snow Leopard 10.6.4 on a late-2009, 17 in. MacBook Pro. Oh, and I installed the Android SDK into another directory (had it installed before I found this tutorial), so here's my $PATH...
-bash: type: /opt/local/bin:/opt/local/sbin:/Users/AJBlue98/soylatte/bin:/Users/AJBlue98/android-sdk-mac_86:/opt/local/bin:/opt/local/sbin:/opt/local/bin:/opt/local/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/texbin:/usr/X11/bin: not found
Click to expand...
Click to collapse
Am I missing something? I'll really appreciate the help!
—Adam
ajblue98 said:
First, excellent guide! Personally, I used Universal Androot (snipurl.com/uaroot) to root my Hero, but this was a huge help in getting the SDK installed!
I'm running into a problem while trying to do the Nandroid backup. When I try to flash the recovery image, I get the following error message....
I even try the command with the leading "./" and I get essentially the same thing...
I'm running the latest official Sprint 2.1 ROM on my Hero and Terminal on Mac OS X Snow Leopard 10.6.4 on a late-2009, 17 in. MacBook Pro. Oh, and I installed the Android SDK into another directory (had it installed before I found this tutorial), so here's my $PATH...
Am I missing something? I'll really appreciate the help!
—Adam
Click to expand...
Click to collapse
yeah, you're missing the "flash_image" binary on your phone lol search xda for it and push it to /system/bin, then try the command again.
regaw_leinad said:
yeah, you're missing the "flash_image" binary on your phone lol search xda for it and push it to /system/bin, then try the command again.
Click to expand...
Click to collapse
Thanks, regaw_leinad, for the lead! I found a copy of the flash_image file and copied it to my Android SDK folder, but when I try to push it to my phone, I get this:
AJBlue98$ ./adb push flash_image /system/bin
failed to copy 'flash_image' to '/system/bin/flash_image': Permission denied
failed to copy 'flash_image' to '/system/bin/flash_image': Read-only file system
Click to expand...
Click to collapse
(I rebooted the phone and tried again after my original post. The error message changed. BTW I'm connected via USB with debugging turned on and "Charge only" selected as my connection type.)
I've tried running adb as root, but I get this:
AJBlue98$ ./adb root
adbd cannot run as root in production builds
Click to expand...
Click to collapse
Again, any help will be greatly appreciated!
—AJBlue98
ajblue98 said:
Thanks, regaw_leinad, for the lead! I found a copy of the flash_image file and copied it to my Android SDK folder, but when I try to push it to my phone, I get this:
(I rebooted the phone and tried again after my original post. The error message changed. BTW I'm connected via USB with debugging turned on and "Charge only" selected as my connection type.)
I've tried running adb as root, but I get this:
Again, any help will be greatly appreciated!
—AJBlue98
Click to expand...
Click to collapse
ok type
adb shell
then
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
to mount it as r/w
then try the flash image command again.
Adb root or adb remount won't work, because your boot.img isn't patched yet.
regaw_leinad said:
ok type
adb shell
then
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
to mount it as r/w
then try the flash image command again.
Adb root or adb remount won't work, because your boot.img isn't patched yet.
Click to expand...
Click to collapse
Okay, I did that. I'm still charge-only and debugging turned on, and here's what happened.
(N.B.: I'm on a Mac, so I have to include "./" before running an application in the current directory. Also, I'm including "AJBlue98" in front of my "$" prompts to differentiate my Mac's local prompts from the adb shell prompts.)
AJBlue98$ ./adb shell
$ mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
mount: Operation not permitted
Click to expand...
Click to collapse
So I tried these few things...
$ su
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
# cd /sdcard/
# mv flash_image /system/bin
failed on 'flash_image' - Cross-device link
# exit
$ exit
AJBlue98$ ./adb shell su mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
Permission denied
AJBlue98$ ./adb push flash_image /system/bin
failed to copy 'flash_image' to '/system/bin/flash_image': Permission denied
Click to expand...
Click to collapse
Now I'm completely flummoxed. As always, please help and thanks in advance!
Update: I got frisky, so I tried this, just for the heck of it...
AJBlue98$ ./adb shell
$ su
# cd /sdcard
# ./flash_image recovery /sdcard/recovery-RA-heroc_v1.2.3.img
./flash_image: permission denied
# chmod 755 ./flash_image
# ./flash_image recovery /sdcard/recovery-RA-heroc_v1.2.3.img
./flash_image: permission denied
# su ./flash_image recovery /sdcard/recovery-RA-heroc_v1.2.3.img
Permission denied
Click to expand...
Click to collapse
Update 2:
I got some help at irc.twit.tv from a good soul in the #twitlive channel, who pointed me to ROM Manager (downloadable from the Market). That just did the whole backup, hey-presto, no flash_image BS required.
Thanks for the help anyway, all!
ajblue98 said:
Okay, I did that. I'm still charge-only and debugging turned on, and here's what happened.
(N.B.: I'm on a Mac, so I have to include "./" before running an application in the current directory. Also, I'm including "AJBlue98" in front of my "$" prompts to differentiate my Mac's local prompts from the adb shell prompts.)
So I tried these few things...
Now I'm completely flummoxed. As always, please help and thanks in advance!
Update: I got frisky, so I tried this, just for the heck of it...
Update 2:
I got some help at irc.twit.tv from a good soul in the #twitlive channel, who pointed me to ROM Manager (downloadable from the Market). That just did the whole backup, hey-presto, no flash_image BS required.
Thanks for the help anyway, all!
Click to expand...
Click to collapse
sweet, glad you got it worked out
there were a few errors in what you did above, but looks like you got everything working without it, so that's good
You need a rooted device
1.Step
Patitioning your sd-Card
forum .xda-developers.com/wiki/index.php?title=SD_card_partitioning
here is a great Howto for this
2. Step
plug on your device via usb to the computer
if you don't have it enable usb debugging
now extract the zip from the Attachment into the root of your sdcard
3. Step
open and adb shell with
Code:
adb shell
now instert the folloing command
Code:
sh /sdcard/app2sd.sh
4. Step
to install app2sd youst press enter
after some time your phone should be reboot
info : on the x10 they will the led lights show you if there is an error
with the sdcard
but my script creates a failsafe it's on /data/appbak
it will be used if you had an sdcard malfunktion
please say me all errors you have
wolfilein
I may need to edit something because I get this error on my M003 (Via8505) :
mount: mounting /dev/block/mtdblock3 on /system failed: Invalid argument
mount: mounting /dev/block//vold/179:2 on /system/sd failed: Invalid argument
busybox is /busybox/bin/busybox
tet
rm: can't remove '/etc/mount_sd.sh': No such file or directory
Partitioned SDcad with three partitions 1. 7gig Fat32 2. 96MB Swap 3. (1GB-96MB) as ext2
System will not complete boot now. Sits at initial boot screen then goes dark. Never get to animated logos.
Time to reflash ROM
Wanted swapfile. If it's the issue I'll remove it and try again
wolfilein said:
You need a rooted device
1.Step
Patitioning your sd-Card
forum .xda-developers.com/wiki/index.php?title=SD_card_partitioning
here is a great Howto for this
2. Step
plug on your device via usb to the computer
if you don't have it enable usb debugging
now extract the zip from the Attachment into the root of your sdcard
3. Step
open and adb shell with
Code:
adb shell
now instert the folloing command
Code:
sh /sdcard/app2sd.sh
4. Step
to install app2sd youst press enter
after some time your phone should be reboot
info : on the x10 they will the led lights show you if there is an error
with the sdcard
but my script creates a failsafe it's on /data/appbak
it will be used if you had an sdcard malfunktion
please say me all errors you have
wolfilein
Click to expand...
Click to collapse
so there is a chance that I can brick my phone (kyocera zio 1.6) and since phone doesnt have a recovery i would be screwed? correct?
i would like to know as well...
jcaf77 said:
so there is a chance that I can brick my phone (kyocera zio 1.6) and since phone doesnt have a recovery i would be screwed? correct?
Click to expand...
Click to collapse
i've been looking into this as well and was wondering the same thing as jcaf.. i have 0 space on this phone and would love to be able to install stuff onto sd card, thanks in advance
please help me..I got on Xperia X8..
busybox: not found
mkdir failed for /system/xbin, file exists
[2]
rm failed for /etc/mount_sd.sh, No such file or directory
sed: cannot create temp file /init.rccfoXyj: Read only file system
:::finished going reboot now:::
and he keeps restarting after SE logo..
Does it work on i5800 with ROOT?
Hello Forum!
So i am currently using a Virgin Mobile LG Optimus Elite.
After 2 days of refuge here on the forums i amazingly found a small little program that was intended to root p500 devices and worked for mine.
I did run root checker and all plus i have root access so it is rooted.
My problem is,
1.) I cannot edit my build.prop
2.) Install Xbox Smartglass (which is the whole reason i'm killing myself for all this right now)
I'm running 2.3.7 gingerbread, and the smartglass app requires 4.0 and up.
I am certain this phone can run the app.
From the very beginning i tried to take the easy path out by manually downloading the .apk from an outside source but when i try to install it
i get an error stating that it had a problem "parsing" the info.
Running my little research i found you could edit the build.prop file to make the play store think you were running another device that was compatible. Then realizing my device must be rooted first, began my 2 days long journey to root the stubborn thing.
After root success, I installed ES File Explorer. From there, i went to my build.prop, proceeded to edit it with the ES text editor. Re-wrote the 2 lines required then when i went to save, "Error occurred when trying to save the file. It will not be saved." And just left me hanging after that.
In a quick desperate attempt, i found QtADB, which i thought would allow me to edit the system files. It only allowed me access to a hand full of the root directories. I downloaded the newest android dev kit (obviously you need it to run QtADB) so i don't know what exactly the problem here is.
For my absolute last desperate attempt i decided to do it manually. I took the build.prop and edited it manually through wordpad. (NOTE: i backed up the original) I named it "copy.build.prop" and placed it back in an easy to find directory. I then opened up ES file explorer, located the file and tried to copy it to the original location but no matter what i name it or what i do in general it will not move. It keeps failing and just telling me the file cannot be moved.
I am at my last legs with this to the point where i may just give up.
I dont know what to do and was hoping someone on here would.
If there was another way to install the app? If i could install it manually? Something to get me around all these utterly frustrating and annoying errors. I've ran from error to error, fixing it then coming to another. And at this point i just dont know what to do.
The help and replies would be much appreciated! Thanks in advanced!
The build.prop file is located in the /system partition, which is by default mounted as read-only (and for good reason).
Here are some simple steps to modifying the build.prop file.
1) Fire up an ADB shell ("adb shell" from a command prompt without quotes)
2) Within the ADB shell, execute "mount -o rw,remount /system /system" without quotes. This will remount your /system partition in read-write mode
3) Open a new command prompt and CD to an easily accessible directory (e.g "cd ~/Desktop" if on a Linux box)
4) Execute "adb pull /system/build.prop" without quotes
5) Edit the build.prop file as needed with a good text editor (DO NOT use Wordpad or Notepad, I prefer Notepad++ on Windows and Geany on Linux)
6) Execute "adb push /path/to/your/edited/build.prop /system/build.prop" without quotes. This will copy your modified build.prop back into the /system partition
7) In the ADB shell prompt, execute "mount -o ro,remount /system /system" without quotes. This will remount your /system partition read-only (never leave it read-write that is bad)
8) Reboot your phone
9) Profit!
As far as the Smartglass app goes, there is likely a good reason it requires ICS and above, and simply modifying your build.prop may not be enough. Don't take my word for it though, try the above steps and see what happens.
Cheers!
drewwalton19216801 said:
The build.prop file is located in the /system partition, which is by default mounted as read-only (and for good reason).
Here are some simple steps to modifying the build.prop file.
1) Fire up an ADB shell ("adb shell" from a command prompt without quotes)
2) Within the ADB shell, execute "mount -o rw,remount /system /system" without quotes. This will remount your /system partition in read-write mode
3) Open a new command prompt and CD to an easily accessible directory (e.g "cd ~/Desktop" if on a Linux box)
4) Execute "adb pull /system/build.prop" without quotes
5) Edit the build.prop file as needed with a good text editor (DO NOT use Wordpad or Notepad, I prefer Notepad++ on Windows and Geany on Linux)
6) Execute "adb push /path/to/your/edited/build.prop /system/build.prop" without quotes. This will copy your modified build.prop back into the /system partition
7) In the ADB shell prompt, execute "mount -o ro,remount /system /system" without quotes. This will remount your /system partition read-only (never leave it read-write that is bad)
8) Reboot your phone
9) Profit!
As far as the Smartglass app goes, there is likely a good reason it requires ICS and above, and simply modifying your build.prop may not be enough. Don't take my word for it though, try the above steps and see what happens.
Cheers!
Click to expand...
Click to collapse
I'm having problems setting a custom directory now... im on a windows 7 pc. I'm using the Qtabd shell, and at first it stated to give the CD a home, i've tried a million combinations and i just cant get one to work!!!
Hey guys,
I just can't figure this one on my own. My phone is bricked, so I'm trying to use ADB in Recovery mode to fix it. The problem is, that 'su' always returns 'permission denied', so I can't mount system rw and that's where I'm stuck.
Phone is fully rooted - that's how I was able to brick it in the first place.
'/system/xbin/su' is also present (checked via Aroma).
Is there any way to "fix" this?
in the recovery go to mount and storage then mount /system.It will be mounted as RW.
I have the e3 stock recovery, so there are only these options:
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
use aroma file manager it have terminal.You can use it in recovery.
or try adb remount
Yes, I know about the aroma terminal and I also tried some commands in it, but without a positive result. But just to be sure, what command(s) did you have in mind?
And 'adb remount' returns:
remount failed: Operation not permitted
if you have e3 recovery that means you havent rooted your phone which means su wont work first root your phone
also it would be great if you could explain a little more as to what you want to accomplish
Oh.. That doesn't sound very good..
I need to modify some files in the system/framework folder.
Anyway, it should be rooted, because I already replaced a system file.
I just found out on the web that in the system settings on CM10 -> Developer settings -> you can set root access also for ADB.
Maybe it helps?