Possibly bricked, any help? - HTC Sensation

Hello,
I just got my sensation yesterday, and tried to s-off and install recovery today.
My phone is hboot 1.27 and s-on, on official HTC ICS firmware.
I was trying to use the "HTC Sensation/XE/4G Super Utility (AIO) by kgs1992" utility, to do s-off,
I downloaded the ControlBearRelease_pyramid_ICS_WIN_NOHTCDEV file and extract to tool foilder. But later I got stuck after it told me to do a post step 5:
5 - Connect phone over USB with debugging enabled
Should be on by default but if not, go to Settings > Develop Option > USB Debugging
6 - Run Juopunutbear S-OFF
Let this run through it's normal procedure, you will see some prompts on your phones screen about X application being granted superuser permissions, this is normal. After about 15-30 seconds your phone will reboot and boot to the Juopunutbear screen (I believe it's a recovery like loader). DO NOT UNPLUG YOUR USB CABLE!
Click to expand...
Click to collapse
My sensation rebooted, and got stuck in a gray screen with status bar, no any "some prompts on your phones screen..." shown.
After about 20 minutes, I decided to unplug USB and see what happened.
Now phone will boot, but will show a gray screen with status bar only.
I can boot into the hboot menu, but I don't know what I can do.
Can anyone give me some hints how to save my phone?

tennyleaz said:
Hello,
I just got my sensation yesterday, and tried to s-off and install recovery today.
My phone is hboot 1.27 and s-on, on official HTC ICS firmware.
I was trying to use the "HTC Sensation/XE/4G Super Utility (AIO) by kgs1992" utility, to do s-off,
I downloaded the ControlBearRelease_pyramid_ICS_WIN_NOHTCDEV file and extract to tool foilder. But later I got stuck after it told me to do a post step 5:
My sensation rebooted, and got stuck in a gray screen with status bar, no any "some prompts on your phones screen..." shown.
After about 20 minutes, I decided to unplug USB and see what happened.
Now phone will boot, but will show a gray screen with status bar only.
I can boot into the hboot menu, but I don't know what I can do.
Can anyone give me some hints how to save my phone?
Click to expand...
Click to collapse
Hi,
I suggest you copy/paste this post onto KGS thread,to see if he can help.

tennyleaz said:
Hello,
I just got my sensation yesterday, and tried to s-off and install recovery today.
My phone is hboot 1.27 and s-on, on official HTC ICS firmware.
I was trying to use the "HTC Sensation/XE/4G Super Utility (AIO) by kgs1992" utility, to do s-off,
I downloaded the ControlBearRelease_pyramid_ICS_WIN_NOHTCDEV file and extract to tool foilder. But later I got stuck after it told me to do a post step 5:
My sensation rebooted, and got stuck in a gray screen with status bar, no any "some prompts on your phones screen..." shown.
After about 20 minutes, I decided to unplug USB and see what happened.
Now phone will boot, but will show a gray screen with status bar only.
I can boot into the hboot menu, but I don't know what I can do.
Can anyone give me some hints how to save my phone?
Click to expand...
Click to collapse
Rare... but I don't think you have bricked your phone I use the revolutionary.io app to convert the phone s-off. I suppose that you didn't install any recovery, but I believe that you can do S-OFF using this method.
I hope the problem fixed when done... :S

Have you tried running an RUU?

Related

[Q] Black screen on Start Up and Vibrates for about 2 minutes

hi,
Ive recently rooted my phone with no problems using the ace hack kit. i tried flashing the newest andriod revolution hd rom and was having problems with the superuser app force closing and the phone wasnt giving me root privledges. i decided to try and reroot the phone using the ace hack kit. (i realize this was my mistake). it stopped in the middle of the process. so i had to pull the battery. when i tried turning the phone back on the screen was black for about 6 or 7 mins. no vibrations or leds to indicate the phone was on. then the htc white screen comes on and the phone vibrates for 2 or 3 minutes straight and proceeds to come on. Ive tried to flash other roms using cwm recovery and itll load what ever rom i choose but i cant get into the hboot or anything and it does the the black screen everytime along with the vibration. is there anyway to fix this? ive tried over and over to boot into recovery through usb but it doesnt work.
so ive done a little research, could this be a eMMC problem? if so is it fixable... And if not would replacing the hboot help?
You've got a bad or corrupt hboot. The wrong hboot (ENG hboot included in a short-lived version of the hack kit on the newest run of Inspires) or a corrupt hboot from an interrupted hack kit run.
Thanks for the help. I tried replacing the eng hboot with the link provided on freenode and it work.
After a failed attempt at running the ace hack kit (could only get into hboot), and an ever worse failed attempt at restoring to a stock rom (my stupid mistake), I am seeing the same signature as jbryancs.
Would you share the link and instructions for replacing the hboot? Any assistance is much appreciated.
wleven said:
After a failed attempt at running the ace hack kit (could only get into hboot), and an ever worse failed attempt at restoring to a stock rom (my stupid mistake), I am seeing the same signature as jbryancs.
Would you share the link and instructions for replacing the hboot? Any assistance is much appreciated.
Click to expand...
Click to collapse
really? so jumping into the IRC channel is not your best move as instructed to the OP?
I was hoping not to disturb the IRC, but I will jump in tomorrow. Just for background, here's a rough list of what I've done and what I'm seeing now.
Setup: Linux Mint 11 (Ubuntu Derivative) Clean Install for ACE Hack Kit, WinXP for the rest.
1. Ran ACE Hack Kit first time -> stalled early in process
2. Rebooted phone and everything appeared normal
3. Rac ACE Hack Kit second time -> completed process, but noticed some errors/warnings along the way
4. Rebooted phone and it would be stuck at the white HTC logo screen
5. Rebooted to hboot, but none of the options there would restore the phone.
6. Downloaded original ACE firmware and copied ZIP to SD card. It recognized this and performed install, in all appearances successfully until the reboot.
7. On reboot, the phone appeared completely dead. Later discovered that it would spring to life after ~7mins, vibrate 2-3 min, and then boot into Froyo
Phase II
1. Downloaded gingerbread RUU from HTC and ran it. Gets stuck on "Waiting for bootloader"
2. Thought perhaps hboot was corrupted, so ran instructions here "wiki.cyanogenmod.com/wiki/HTC_Ace:_Rooting_%26_CyanogenMod" to install hboot-eng and clockworkmod
3. This did not fix the booting (still wait 7mins, vibrate 2-3), but I do have root now, as verified through su root on the phone's terminal console.
4. Tried the RUU again, stuck on "Waiting for bootloader"
5. Noticed that if I had the phone USB connected to the PC when power cycling, it would come to a black HTC screen after about 7mins. In this mode, the phone seems to connect in Android bootloader interface.
6. Tried the RUU again, and this time it makes it past "Waiting for bootloader", but hangs (no error message) on "Sending". I've left it for nearly an hour with no change -- just keeps showing the black HTC screen.
I still can't get the phone into HBOOT (using the volume down + power method).
Hello,
Could someone tell me if there's an enclosure or a solution to this problem?
I've searched a few forums, and it appear to me that the conclusion is the old (ENG) HBOOT is incompatible with newer hardware.
Thanks.
hchao said:
Hello,
Could someone tell me if there's an enclosure or a solution to this problem?
I've searched a few forums, and it appear to me that the conclusion is the old (ENG) HBOOT is incompatible with newer hardware.
Thanks.
Click to expand...
Click to collapse
You will have to flash the original RUU again and then try to root the cell with the Hack Kit. You can find the original RUU in the general section or go to the htc site and just run the .exe update from fastboot. Let your cell reboot (it will take about 30 minutes) and then flash it.
jbryancs said:
hi,
Ive recently rooted my phone with no problems using the ace hack kit. i tried flashing the newest andriod revolution hd rom and was having problems with the superuser app force closing and the phone wasnt giving me root privledges. i decided to try and reroot the phone using the ace hack kit. (i realize this was my mistake). it stopped in the middle of the process. so i had to pull the battery. when i tried turning the phone back on the screen was black for about 6 or 7 mins. no vibrations or leds to indicate the phone was on. then the htc white screen comes on and the phone vibrates for 2 or 3 minutes straight and proceeds to come on. Ive tried to flash other roms using cwm recovery and itll load what ever rom i choose but i cant get into the hboot or anything and it does the the black screen everytime along with the vibration. is there anyway to fix this? ive tried over and over to boot into recovery through usb but it doesnt work.
so ive done a little research, could this be a eMMC problem? if so is it fixable... And if not would replacing the hboot help?
Click to expand...
Click to collapse
I am having this same problem I have searched and searched and this post was the only one that had the same issue could someone please help me out on this and post the fix. Thanks

[Q] my htc sensation will not boot

I have a Htc Sensation running on the Tmobile network
i decided to go with a different rom and tried to install the rom from COREDROID SENSATION XE & 4G v5.1.
after installing it was stock on the boot screen.
I tried to SCID and install PG58DOAG.
at this point my phone will not boot.
I can get into the the recovery mode after i select "recovery" it goes to a screen with a red triangle and an exclamation mark.
I the volume up and power and the try to install a update...but non has worked
can get one help??
download this file http://www.filefactory.com/file/c19...00U_10.14.9035.01_M_release_223976_signed.exe
and run it with your phone plugged in your pc, it should do a stock recovery on your phone.
I faced the same issue with another ROM.
The only way I found to reboot was to reinstall the firmware while connected via USB with the PC.
And after that, I reinstalled the ROM.
I couldnt even boot.
primekrieger said:
I couldnt even boot.
Click to expand...
Click to collapse
Okay, first off stop digging up multiple 1 and 2 year old threads to post about your problem.
Second, be MUCH more specific about what the issue is. What happened before it stopped booting? Was it dropped or something or was it working fine?
Is it rooted?
Is it S-Off?
Skipjacks said:
Okay, first off stop digging up multiple 1 and 2 year old threads to post about your problem.
Second, be MUCH more specific about what the issue is. What happened before it stopped booting? Was it dropped or something or was it working fine?
Is it rooted?
Is it S-Off?
Click to expand...
Click to collapse
Sorry about that.
Here are the full details:
I have a Sensation XE, it was running ARHD 7.2, rooted, Bootloader Unlocked, S-OFF
I was playing subway surfers when all of a sudden the phone froze, no buttons nothing worked. After a while it itself restarted and got stuck on the white HTC boot screen. When it didnt progress for some minutes, I removed the battery, reinserted it and tried turning it on. But nothing, no signs of life were shown. Even on connecting the wall charger there was no charging LED.
Only thing is that windows can detect it as QHSUSB_DLOAD or something.
I checked out the Unbricking Sensation forum at: http://forum.xda-developers.com/show....php?t=1522351
but they say it works only for devices bricked while turning to S-ON, but as I mentioned mine is S-OFF. So, can I still use their method or is there some alternative?
Thanks
primekrieger said:
Sorry about that.
Here are the full details:
I have a Sensation XE, it was running ARHD 7.2, rooted, Bootloader Unlocked, S-OFF
I was playing subway surfers when all of a sudden the phone froze, no buttons nothing worked. After a while it itself restarted and got stuck on the white HTC boot screen. When it didnt progress for some minutes, I removed the battery, reinserted it and tried turning it on. But nothing, no signs of life were shown. Even on connecting the wall charger there was no charging LED.
Only thing is that windows can detect it as QHSUSB_DLOAD or something.
I checked out the Unbricking Sensation forum at: http://forum.xda-developers.com/show....php?t=1522351
but they say it works only for devices bricked while turning to S-ON, but as I mentioned mine is S-OFF. So, can I still use their method or is there some alternative?
Thanks
Click to expand...
Click to collapse
Can you get into recovery?
Sent from your phone. You should be careful where you leave that thing.
Skipjacks said:
Can you get into recovery?
Sent from your phone. You should be careful where you leave that thing.
Click to expand...
Click to collapse
No, I can't get to recovery. The phone doesn't start up at all. But windows detects something like QHSUSB_DLOAD when connecting through usb.
primekrieger said:
No, I can't get to recovery. The phone doesn't start up at all. But windows detects something like QHSUSB_DLOAD when connecting through usb.
Click to expand...
Click to collapse
Is the battery charging when you connect it to USB like that? If so I'd say to try an ruu to return it to completely stock. You will lose all user data on the internal memory when doing this. And it will return the phone to s-on and stock ROM. You will have to start over.
Do a search for ruu and you should find the thread that walks you through the process. Its really easy. You basically just run an .exe file from windows and it does everything else.
Sent from your phone. You should be careful where you leave that thing.
Skipjacks said:
Is the battery charging when you connect it to USB like that? If so I'd say to try an ruu to return it to completely stock. You will lose all user data on the internal memory when doing this. And it will return the phone to s-on and stock ROM. You will have to start over.
Do a search for ruu and you should find the thread that walks you through the process. Its really easy. You basically just run an .exe file from windows and it does everything else.
Sent from your phone. You should be careful where you leave that thing.
Click to expand...
Click to collapse
No, the charging LED doesnt glow.
Phone is detected on USB connection after i remove the battery. And moreover windows doesnt detect it as a phone i think.
PS: Losing data, S-OFF, ROM is not a concern. I just want it working, bought it just 6 months ago :crying:
primekrieger said:
No, the charging LED doesnt glow.
Phone is detected on USB connection after i remove the battery. And moreover windows doesnt detect it as a phone i think.
PS: Losing data, S-OFF, ROM is not a concern. I just want it working, bought it just 6 months ago :crying:
Click to expand...
Click to collapse
Do you have access to another battery just to make sure your battery isn't fried? If there is physical damage to the battery it will neither charge nor will it power on.
Also, try doing the ruu thing anyway. Worst its going to do is not work.
Sent from your phone. You should be careful where you leave that thing.
Skipjacks said:
Do you have access to another battery just to make sure your battery isn't fried? If there is physical damage to the battery it will neither charge nor will it power on.
Also, try doing the ruu thing anyway. Worst its going to do is not work.
Sent from your phone. You should be careful where you leave that thing.
Click to expand...
Click to collapse
As you said I searched for RUU for my phone, but now the problem is I can't decide what RUU to download since the phone wont start and therefore I can't see software number or CID.
primekrieger said:
As you said I searched for RUU for my phone, but now the problem is I can't decide what RUU to download since the phone wont start and therefore I can't see software number or CID.
Click to expand...
Click to collapse
from bootloader connect the device in the pc via usb(it should say fastboot usb)
open a cmd in the folder where you have adb and fastboot files and do these commands
fastboot getvar version-main
fastboot getvar cid
rzr86 said:
from bootloader connect the device in the pc via usb(it should say fastboot usb)
open a cmd in the folder where you have adb and fastboot files and do these commands
fastboot getvar version-main
fastboot getvar cid
Click to expand...
Click to collapse
Hi there!
Even my device is facing similar sort of problems. Although the situation is not as bad as the op,but still the phone is still just a paperweight.
Now what I did- unlocked bootloader via HTC dev site( HBOOT Ver 1.27)
Decided to S-off by J.Bear method.
Everyhting went fine untill the phone restarted. Controlbear no longer recognised the device. It said check your drivers.
That was the time when everything messed up.
Now the phone would no longer boot ahead of the white HTC bootscreen. And sometimes it even powers on directly to recovery(even when i'm not pressing volume down).
And one more strange thing happening.."adb devices" command doesn't show any devices listed although i can check the firmware and cid version(via fastboot command). And the device is showing up in device manager(my HTC). But adb commands are not working.
Am i missing something?
Any help would be much appreciated.
walkermoon said:
Hi there!
Even my device is facing similar sort of problems. Although the situation is not as bad as the op,but still the phone is still just a paperweight.
Now what I did- unlocked bootloader via HTC dev site( HBOOT Ver 1.27)
Decided to S-off by J.Bear method.
Everyhting went fine untill the phone restarted. Controlbear no longer recognised the device. It said check your drivers.
That was the time when everything messed up.
Now the phone would no longer boot ahead of the white HTC bootscreen. And sometimes it even powers on directly to recovery(even when i'm not pressing volume down).
And one more strange thing happening.."adb devices" command doesn't show any devices listed although i can check the firmware and cid version(via fastboot command). And the device is showing up in device manager(my HTC). But adb commands are not working.
Am i missing something?
Any help would be much appreciated.
Click to expand...
Click to collapse
probably your hboot get locked after S-OFF.that's why adb commands don't work(i think)
check your bootloader details
if now you have S-OFF and locked hboot flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
it will give you also patched hboot which is unlocked
follow the instructions to the letter(important)
and before flashing check md5 sums(important)
rzr86 said:
probably your hboot get locked after S-OFF.that's why adb commands don't work(i think)
check your bootloader details
if now you have S-OFF and locked hboot flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
it will give you also patched hboot which is unlocked
follow the instructions to the letter(important)
and before flashing check md5 sums(important)
Click to expand...
Click to collapse
Appreciate your concern.
But the thing is my device is still S On. The JBear method didn't finish. It messed up in between.
I'm attaching a pic. Give a look.
walkermoon said:
Appreciate your concern.
But the thing is my device is still S On. The JBear method didn't finish. It messed up in between.
I'm attaching a pic. Give a look.
Click to expand...
Click to collapse
hmm,
probably you need to use the temproot remove.bat file to remove temproot
check for troubleshooting in this thread
http://forum.xda-developers.com/showthread.php?t=1661631
also refer you issue there
ganeshp will help you further
or you can install 4ext recovery
enable smartflash from it and flash a custom rom

I've been stupid....Desire, trying to get adb working in fastboot?

Hi all.
So I used revolutionary to s-off and root. the installed a ICS ROM to my desire played with it for a bit - didn't like it.
Decided to run an RUU to put my phone back - big mistake..... I didn't realise the revolutionary Hboot wouldn't be overwritten. now my phone just boots to white background with green HTC logo...no further
I cannot run recovery from the revolutionary hboot menu, just does the white background HTC thing....
I can't run adb from command prompt, will not see my device. I'm sure I had usb debugging left on
I'm stuck.... can anyone help at all? I can't boot to anything and hboot doesn't appear to work
I know I shouldn't have run that RUU, it's my own stupid fault
many thanks peeps
Mark.
and I've tried running the'unlock bootloader' from the HTC site, which does see my phone but says it can't update as ROM is out of date
anyone? pretty please

Verifying my Glacier is Bricked

I have followed all of the procedures to reload my phone stuch on the splash screen, but have had no luck. Before I dispose of the phone, as it is in mint condition, I want to be sure there is no other options to update / reformat the bootloader
1. I have loaded the image for 2.2.1 AND 2.3.4 MULTIPLE TIMES
2. I have cleared the Cache's and no change
3. status on bootloader shows
GLACIAER PVT SHIP S-ON
HBOOT-09.0006
MICROP-0429
RADIO-26.13.04.19_M
eMMC-BOOT
Jul 15 2011, 16:45:17
I guess the last hope since th reloading the original images did not work is to reload / format the bootloader using ADB, but I believe that I have the wrong HBoot.
Is the phone eMMC bad and the phone bricked or is there something else to try?
johnmbailey said:
I have followed all of the procedures to reload my phone stuch on the splash screen, but have had no luck. Before I dispose of the phone, as it is in mint condition, I want to be sure there is no other options to update / reformat the bootloader
1. I have loaded the image for 2.2.1 AND 2.3.4 MULTIPLE TIMES
2. I have cleared the Cache's and no change
3. status on bootloader shows
GLACIAER PVT SHIP S-ON
HBOOT-09.0006
MICROP-0429
RADIO-26.13.04.19_M
eMMC-BOOT
Jul 15 2011, 16:45:17
I guess the last hope since th reloading the original images did not work is to reload / format the bootloader using ADB, but I believe that I have the wrong HBoot.
Is the phone eMMC bad and the phone bricked or is there something else to try?
Click to expand...
Click to collapse
When you try to flash PDwhatever.IMG, what does it tell you?
Glacier locked at Mytouch logo, without image load errors
THEindian said:
When you try to flash PDwhatever.IMG, what does it tell you?
Click to expand...
Click to collapse
It does not give any errors after flashing to 2.3.4, as it loads, verifies, then asks to load. It then successfully loads all pieces of the image, only to reboot to the same Mytouch logo screen.
When I use recovery, it can't mount anything, and when I wipe the Cache, it give arror that Ext3 is not compatible.
I reboot and factory restore in recovery, and gives the Ext3 compatibility message and can't mount anything.
I never receive any image loading errors, but I cannot load the 2.2.1 image, as it never give me a chance to say 'yes' to loading it.
If it doesn't work, care to sell it? I need a back and home button for mine lol
I also think my volume buttons will be gone soon, their starting to stick
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
siloner said:
If it doesn't work, care to sell it? I need a back and home button for mine lol
I also think my volume buttons will be gone soon, their starting to stick
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
Click to expand...
Click to collapse
The phone is in Mint Condition, so I hoped to resurrect it if at all possible, but if it is not possible I definitely will be selling it whole or in part.
johnmbailey said:
It does not give any errors after flashing to 2.3.4, as it loads, verifies, then asks to load. It then successfully loads all pieces of the image, only to reboot to the same Mytouch logo screen.
When I use recovery, it can't mount anything, and when I wipe the Cache, it give arror that Ext3 is not compatible.
I reboot and factory restore in recovery, and gives the Ext3 compatibility message and can't mount anything.
I never receive any image loading errors, but I cannot load the 2.2.1 image, as it never give me a chance to say 'yes' to loading it.
Click to expand...
Click to collapse
Thats really weird because usually if the emmc is dead, the image doesn't load completely in the bootloader. Have you tried calling tmo and telling them about your predicament? I know you are over warrenty but they might still help.
Glacier Stuck on Splash, now on StraightTalk service
THEindian said:
Thats really weird because usually if the emmc is dead, the image doesn't load completely in the bootloader. Have you tried calling tmo and telling them about your predicament? I know you are over warrenty but they might still help.
Click to expand...
Click to collapse
I am now on Straight Talk, so I no longer have a TMobile account to call about. My PAygo ended on Sunday with them.
Can I load anything from ADB with this version of the HBoot / Bootloader? Does the Ext3 mean it had a newer Rom, so I need to change to a supported type using ADB? IT almost looked like the Ext3 format was causing the problem. This also might be a red flag to support if it was not on a factory format. I inherited the phone, so I do not know the history.
Since it never finished booting, is there any way to use the original HTC.exe programs that install the RUU image?
Why are you s-on? Shouldn't you be s-off if you want to install a rom??
Have you tried rooting method again? As far as i know using the gfree method should not give you this issue,
Sent from my Arrows Z using xda app-developers app
Mytouuch 4g - stuck at splash screee
I bought phone from CL. As I suspected previous owner tried to mod the phone. It loads to splash screen. I can get into bootloader but can not select RECOVERY or FACTORY RESET. I tried the PD15IMG.ZIP but when i extracted hboot is 0.89 (and the following happens):
***LOCKED***
GLACIER PVT SHIP S-ON
HBOOT-0.90.0000
MICROP-0429
RADIO-26.13.04.19_M
eMMC-boot
PD15DIAG.ZIP
no image
PD15DIAG.nbh
no image
Main Version is older!
Update Fail!
Press<power> to reboot
I think i need the IMG that pertains to the HBOOT.
HELP PLEASE
Thank you all
Glacier is Stuch at Splash, so what are options after reloading img?
NeuroticallyYou said:
Why are you s-on? Shouldn't you be s-off if you want to install a rom??
Have you tried rooting method again? As far as i know using the gfree method should not give you this issue,
Sent from my Arrows Z using xda app-developers app
Click to expand...
Click to collapse
The phone is stuck at the splash, so what options do I have that load from SD or USB at the 'Stuck' splash or 'Bootloader'? Can I use the HTC EXE programs to reload the phone or do they require a 'fully booted' phone? Is there any way to load the engineered hboot / bootloader so that I can have ADB options?
johnmbailey said:
The phone is stuck at the splash, so what options do I have that load from SD or USB at the 'Stuck' splash or 'Bootloader'? Can I use the HTC EXE programs to reload the phone or do they require a 'fully booted' phone? Is there any way to load the engineered hboot / bootloader so that I can have ADB options?
Click to expand...
Click to collapse
ok let's calm down and not panic, something similar happened to me when i started rooting my first MT4G, did you try to root the phone? if not i will suggest you to do that with the cyanogenmod guide HERE but before you follow the guide try to boot into bootloader by shutting the phone down, leave it off for like 10 seconds then turn it on by pressing the power button+volume down key, you will enter into bootloader usually you will see 3 androis at the bottom of the screen on skateboards if you don't see that but instead the phone keeps booting into splash screen then try again until you enter bootloader, wihle in bootloader you need to tell me what options you get and what options are enabled, since you can't mount the SD card you will have to get an adapter to download all software needed on the SD card(remember you have to remove the sd card from the phone since you can't mount it). Proceed with the guide until you install a custom rom like CyanogenMod 7.
this type of errors can be reproduced easily for example on a rooted phone wipe the phone completely and reboot, the phone will do exactly the same your phone is doing another thing is i don't know what is this HTC.exe program you are talking about everything is done with the android SDK so before doing everything in the guide you need to download and isntall the android SDK.
it seems like the previous person tried to root but instead messed up the phone system, probably corrupted? like i said i have reproduced the same behaviour on my MT4G many times and by now i don't freak out like it was the first time, the thing that have saved me is the rooting guide, i know by experience that you CAN'T install a rom or anything if you are S-ON.
Bootloader options on Glacier Stuck at bootloader
NeuroticallyYou said:
ok let's calm down and not panic, something similar happened to me when i started rooting my first MT4G, did you try to root the phone? if not i will suggest you to do that with the cyanogenmod guide HERE but before you follow the guide try to boot into bootloader by shutting the phone down, leave it off for like 10 seconds then turn it on by pressing the power button+volume down key, you will enter into bootloader usually you will see 3 androis at the bottom of the screen on skateboards if you don't see that but instead the phone keeps booting into splash screen then try again until you enter bootloader, wihle in bootloader you need to tell me what options you get and what options are enabled, since you can't mount the SD card you will have to get an adapter to download all software needed on the SD card(remember you have to remove the sd card from the phone since you can't mount it). Proceed with the guide until you install a custom rom like CyanogenMod 7.
this type of errors can be reproduced easily for example on a rooted phone wipe the phone completely and reboot, the phone will do exactly the same your phone is doing another thing is i don't know what is this HTC.exe program you are talking about everything is done with the android SDK so before doing everything in the guide you need to download and isntall the android SDK.
it seems like the previous person tried to root but instead messed up the phone system, probably corrupted? like i said i have reproduced the same behaviour on my MT4G many times and by now i don't freak out like it was the first time, the thing that have saved me is the rooting guide, i know by experience that you CAN'T install a rom or anything if you are S-ON.
Click to expand...
Click to collapse
The 2.2.1 image does not load due to 'older version' error in the bootloader, so I renamed it so that it would stop at bootloader to test working options.
Glacier pvt ship s-on
HBOOT-0.89.0006
MICROCROP-0429
RADIO-26.13.04.19_M
cMMC-boot
Jul 15 2011, 16:45:17
HBOOT
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
Fastboot of course works, as I am able to run the image load from SD card
REcovery works, but give the various mounting errors mentioned earlier
factory reset can be selected but does not change anything and it returns to the splash screen
I did not try simlock, as it looks irrelevant
image crc works and seems to check an image somewhere
When I select RECOVERY, Press UP Volume and Power to get past Triangle, it enters the recovery with all of the mount errors, and then the menu pops up
Androic System Recovery <3e>
Use volume .....
Select w Power....
Reboot System Now
Apply Update from SD card
Wipe data / Factory Reset
Wipe Cache Partition
Wiping DAta completes with Ext3 error, unable to mount anything, and unable to open errors, and returns to Recovery menu
Wiping Cache completes wipe with Ext3 error, unable to mount, unable to open and then reboots
Apply Update from SD Card also appears to fail
Rebooting by reason OEM
Cant mount
Count open
then it reboots
From what screens can you mount the 'drive' to use with ADB? When trying to run the ADB commands, I get the error device not found, so I either am not in the correct mode on the phone or I do not have the correct drivers. When coinnectd at the splash screen, my device manafer shows a Portable Device with Drive f:\ and the details show an Android Phone, but the drive is not visible or accessible by ADB.
When I start bootloader with Hboot at USB PLUG mode, the device manage on my computer changes to Android Bootloader device, but I still get 'Device Not Found' after executing the first ADB command. I then followed the info (I think) at http://forum.xda-developers.com/showthread.php?t=881324 with no success for ADB to work, so I something must be wrong.
It seems the S-ON option is not letting you go further, if it gave you a ext3 format error most likely is because the phone can't erase or rewrite the partition needed. Now I'm no expert on the hardware part but I put my small knowledge on that it have to do with the S-ON part of the phone.
Was the phone booting up properly before? If the phone can't boot to android then you can't use adb commands(for what I know) also the fact you don't have a custom recovery image will make it hard for you reinstall android.
I can probably make some time to help you but nothing is better than having the phone so I can troubleshoot. If you want we can chat on gmail to set up a remote session? Other than that I don't see how I can help you.
Sent from my Arrrows Z using xda app-developers app
FINAL Questions on Recovering Glacier MyTouch 4g stuck at Splash
NeuroticallyYou said:
It seems the S-ON option is not letting you go further, if it gave you a ext3 format error most likely is because the phone can't erase or rewrite the partition needed. Now I'm no expert on the hardware part but I put my small knowledge on that it have to do with the S-ON part of the phone.
Was the phone booting up properly before? If the phone can't boot to android then you can't use adb commands(for what I know) also the fact you don't have a custom recovery image will make it hard for you reinstall android.
I can probably make some time to help you but nothing is better than having the phone so I can troubleshoot. If you want we can chat on gmail to set up a remote session? Other than that I don't see how I can help you.
Sent from my Arrrows Z using xda app-developers app
Click to expand...
Click to collapse
Since the phone will not go pase the splash or bootloader / hboot.....
Questions:
1. Can the original manufacturer RUU - Rom Update Utility be downloaded somewhere and if so wouldn't it just need the phone in Bootloader mode?
2. For the ADB method, will it work with thge phone at the Bootloader screen, and if so what drivers arfe needed as the Android Bootloader ones do not work that are showing. Is these another setting beyond just the driver that needs to be set to use ADB?
3. Will a program like Odin that I used to recover my samsung image from bootloader work for these phones?
4. Does anyone have any ideas or should I just part out this Mint phone?
Please refer to previous posts for the details on what has already been tried....and what it is still doing.
johnmbailey said:
Since the phone will not go pase the splash or bootloader / hboot.....
Questions:
1. Can the original manufacturer RUU - Rom Update Utility be downloaded somewhere and if so wouldn't it just need the phone in Bootloader mode?
2. For the ADB method, will it work with thge phone at the Bootloader screen, and if so what drivers arfe needed as the Android Bootloader ones do not work that are showing. Is these another setting beyond just the driver that needs to be set to use ADB?
3. Will a program like Odin that I used to recover my samsung image from bootloader work for these phones?
4. Does anyone have any ideas or should I just part out this Mint phone?
Please refer to previous posts for the details on what has already been tried....and what it is still doing.
Click to expand...
Click to collapse
I don't know of an external app like odin that works for our phone. Also, there are no RUU's for the Glacier, only PD15IMG.zip files.
Since Mint MyTouch 4g Phone is Bricked, how much will work for Slide Version?
I saw an old post with a broken link for an RUU that was supposed to work on the Glacier called the panache. I finally found a working link and downloaded the RUU for Gingerbread, but when I ran it it gave and error that the battery was below 30%, even though fully charged and verified with my wall charger, and 2 usb chargers and 2 different batteries. I might try a powered USB hub, but this data on battery condition might have been stored on the phone somehow? If it could get the phone to work again, then a I could always reflash with a different ROM later.
If there is no hope of recovering this Mint MyTouch 4g Stuck on the splash screen, so can parts be used on the shift / slide version such as LCD / Digitizer, push buttons, or ????
It makes me sick to tear it apart.....
Any other thoughts?
Ran into similar problem
I ran into a similar problem with a message about the version number of the recovery image being wrong. This was a few weeks ago and I didn't keep a log of exactly how I fixed it but this is what I remember:
It turned out that during an attempt to root before I knew what I was doing I had changed the version number using the guide at the link below.
http://www.androidauthority.com/mytouch-4g-t-mobile-root-custom-recovery-74465/
That error message was misleading and the problem was instead due to the fact the phone was unlocked (although mine did say so on the bootloader screen.) HTC images have apparently been created to require a locked phone to successfully load. I relocked it in Fastboot USB mode with the command "fastboot oem relock" and was able to successfully load any version number after that.
Good luck.
Hello, have you tried using a different SD card?
Sent from my HTC Sensation 4G using xda app-developers app

HTC Inspire in loop between htc and at&t logo

Hi,
My HTC has been working fine all along and had all the latest updates (stock, not rooted, no custom or anything). A few days ago (dec-23rd I think) I woke up and it wasnt working, froze on me, once I rebooted it started and was showing each app failing with a message "forced to stop after unexpected error". I can get it start that way after a few tries, but most of the time it loops between "htc and at&t logo rethink possible"
I have tried a few things after that..
1. Go to the HBOOT and select "Factory reset", nothing happens goes back to the white htc screen
2. Go to the HBOOT and select "Recovery", was going to the red triangle. After couple of days on the xda-developers website, found out that you got to hit the volume-up and power after the red triangle to get the menu options (thanks for that). I went into that menu and cleared data and cache (all it showed was cant open /data/... and cant open /cache/data/recovery/ .. messages). It still hasnt helped
3. I have downloaded htc sync and the latest RUU from htc. I have installed htc sync. When I connect the phone, windows pc says "USB device not recognized". I tried to run the RUU when I was in the HBOOT and also from the Fastboot screens, havent had any luck. It ends up with Error 170 message USB Connection error .
4. Downloaded the PD98IMG (about 255MB size) to the SD card and tried the HBOOT and it shows message "Main version is older" message
Also went to IRC #htc-ace and no one was responding there, not sure if its the correct irc.
Any help would be great..
vinod_home said:
Hi,
My HTC has been working fine all along and had all the latest updates (stock, not rooted, no custom or anything). A few days ago (dec-23rd I think) I woke up and it wasnt working, froze on me, once I rebooted it started and was showing each app failing with a message "forced to stop after unexpected error". I can get it start that way after a few tries, but most of the time it loops between "htc and at&t logo rethink possible"
I have tried a few things after that..
1. Go to the HBOOT and select "Factory reset", nothing happens goes back to the white htc screen
2. Go to the HBOOT and select "Recovery", was going to the red triangle. After couple of days on the xda-developers website, found out that you got to hit the volume-up and power after the red triangle to get the menu options (thanks for that). I went into that menu and cleared data and cache (all it showed was cant open /data/... and cant open /cache/data/recovery/ .. messages). It still hasnt helped
3. I have downloaded htc sync and the latest RUU from htc. I have installed htc sync. When I connect the phone, windows pc says "USB device not recognized". I tried to run the RUU when I was in the HBOOT and also from the Fastboot screens, havent had any luck. It ends up with Error 170 message USB Connection error .
4. Downloaded the PD98IMG (about 255MB size) to the SD card and tried the HBOOT and it shows message "Main version is older" message
Also went to IRC #htc-ace and no one was responding there, not sure if its the correct irc.
Any help would be great..
Click to expand...
Click to collapse
You need to re flash the latest att ruu from HTC site. Find your device in support section and download the .exe file. Run it then in fastboot usb. If after that you are still in a bootloop, then your mobo is failing
Sent from my GT-N7000 using xda app-developers app
glevitan said:
You need to re flash the latest att ruu from HTC site. Find your device in support section and download the .exe file. Run it then in fastboot usb. If after that you are still in a bootloop, then your mobo is failing
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I tried to run the ruu that I downloaded from HTC site "htc_inspire4g_att_RUU_3.20.502.52_US", but since the computer says "USB device failed to connect" I get the error 170. When i run the RUU it doesnt see it. I have tried to run the RUU when I was on the HBOOT screen and Fastboot screen.
vinod_home said:
I tried to run the ruu that I downloaded from HTC site "htc_inspire4g_att_RUU_3.20.502.52_US", but since the computer says "USB device failed to connect" I get the error 170. When i run the RUU it doesnt see it. I have tried to run the RUU when I was on the HBOOT screen and Fastboot screen.
Click to expand...
Click to collapse
You need to run it from fastboot not hboot. When you plug the phone in hboot you should read fastboot usb in red in the phone, not hboot usb plug. If you see the latter, press power..
Sent from my GT-N7000 using xda app-developers app
glevitan said:
You need to run it from fastboot not hboot. When you plug the phone in hboot you should read fastboot usb in red in the phone, not hboot usb plug. If you see the latter, press power..
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
When i get to the Hboot (in blue highlited) section, the Fastboot (is highlighted in blue and is the first option), then i hit the power. Now it takes me to the Fastboot (highlighted in red) screen, with options bootloader, reboot, reboot bootloader, power down. This is when I connect the usb cable to the phone and computer. The computer then dings (USB Device Not Recognised message), I then run the RUU exe file that I downloaded from HTC website and it shows the accept terms screen, then connect the phone screen, it then shows "Verifying information " message and I end up with Error 170: USB Connection Error.
vinod_home said:
When i get to the Hboot (in blue highlited) section, the Fastboot (is highlighted in blue and is the first option), then i hit the power. Now it takes me to the Fastboot (highlighted in red) screen, with options bootloader, reboot, reboot bootloader, power down. This is when I connect the usb cable to the phone and computer. The computer then dings (USB Device Not Recognised message), I then run the RUU exe file that I downloaded from HTC website and it shows the accept terms screen, then connect the phone screen, it then shows "Verifying information " message and I end up with Error 170: USB Connection Error.
Click to expand...
Click to collapse
Sorry, do You mind if i have a look at it vía teamviewer?
glevitan said:
Sorry, do You mind if i have a look at it vía teamviewer?
Click to expand...
Click to collapse
How would you be able to look using teamviewer. the phone is not recognized on the pc
vinod_home said:
How would you be able to look using teamviewer. the phone is not recognized on the pc
Click to expand...
Click to collapse
I can try to get some information...the RUU can also be flashed in fastboot no SDCARD needed...but that is up to you. Just let me know..
glevitan said:
I can try to get some information...the RUU can also be flashed in fastboot no SDCARD needed...but that is up to you. Just let me know..
Click to expand...
Click to collapse
sure. what do you need me to do?
vinod_home said:
sure. what do you need me to do?
Click to expand...
Click to collapse
download teamviewer, and in a private message send me the ID and PASS...I will connect to your PC. If we are lucky we will be able to sort the issue out...
glevitan said:
download teamviewer, and in a private message send me the ID and PASS...I will connect to your PC. If we are lucky we will be able to sort the issue out...
Click to expand...
Click to collapse
I'm having the SAME exact problem, Did you ever get it worked out?
Thanks!
ep9716 said:
I'm having the SAME exact problem, Did you ever get it worked out?
Thanks!
Click to expand...
Click to collapse
glevitan is no longer active on these forums.
bananagranola said:
glevitan is no longer active on these forums.
Click to expand...
Click to collapse
Anyone else that has fixed this same issue around here?
Thanks in advance!
ep9716 said:
Anyone else that has fixed this same issue around here?
Thanks in advance!
Click to expand...
Click to collapse
The HTC bootloop can be caused by quite a few factors. What state was your phone in, what did you do, and what state is it in now?
bananagranola said:
The HTC bootloop can be caused by quite a few factors. What state was your phone in, what did you do, and what state is it in now?
Click to expand...
Click to collapse
Stuck in the Rethink possible boot animation.
I ran the "htc_inspire4g_att_RUU_3.20.502.52_US" It and did complete it after like 20 tires.
I was getting error 170 before "some type of usb problem"
Now its just boot-looping there.
Thank you for your reply.
ep9716 said:
Stuck in the Rethink possible boot animation.
I ran the "htc_inspire4g_att_RUU_3.20.502.52_US" It and did complete it after like 20 tires.
I was getting error 170 before "some type of usb problem"
Now its just boot-looping there.
Thank you for your reply.
Click to expand...
Click to collapse
More details. Were you S-Off? Bootloader unlocked? Rooted? Custom recovery? Custom ROM? Why did you flash the RUU - was something broken? Did your phone ship with Froyo or GB? How long is hboot taking to start now? Is the phone detected on your computer?
bananagranola said:
More details. Were you S-Off? Bootloader unlocked? Rooted? Custom recovery? Custom ROM? Why did you flash the RUU - was something broken? Did your phone ship with Froyo or GB? How long is hboot taking to start now? Is the phone detected on your computer?
Click to expand...
Click to collapse
Super stock. I was not S-Off, Not unlocked, Nor rooted. It shipped with GB. Hboot starts up quick. No my Pc does not detect it
I flashed the RUU Because My phone was hanging on when booting. I would have to take the battery out 2-3 time before it would boot. All my apps were crashing. It would not factory reset thru the phone. So that is why I flashed it via RUU.
ep9716 said:
Super stock. I was not S-Off, Not unlocked, Nor rooted. It shipped with GB. Hboot starts up quick. No my Pc does not detect it
I flashed the RUU Because My phone was hanging on when booting. I would have to take the battery out 2-3 time before it would boot. All my apps were crashing. It would not factory reset thru the phone. So that is why I flashed it via RUU.
Click to expand...
Click to collapse
Unfortunately, you're beyond the scope of my knowledge. Hopefully someone else can help you out.
bananagranola said:
Unfortunately, you're beyond the scope of my knowledge. Hopefully someone else can help you out.
Click to expand...
Click to collapse
I Pretty much thought the same thing too hahaha.
I'm just going to throw a new board on it and call it a day until I get my Riff box to test point it.
Thank for you help bud. :good:
HTC 4g Inspire brick
glevitan said:
download teamviewer, and in a private message send me the ID and PASS...I will connect to your PC. If we are lucky we will be able to sort the issue out...
Click to expand...
Click to collapse
I have the same issue please help me.

Categories

Resources