Related
XFAB Phablet(DAPENG A9230+,PICOPAD 5 GEA) - 5" Android Mobile - Root, CWM and ROMS
Dear Friends,
Good day.
I have own this device, which is from NXG electronics Ltd, India. It is good and I enjoy it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Device XFAB PHABLET (MODEL NO - E1808_V75_HJY1A6X_5647)
[*]Brand NXG Electronics Ltd, India
[*]CPU 1GHz Cortex A9 (ARM v7 processor rev 10)
[*]Hardware MT6575
[*]OS Android 4.0 Ice Cream Sandwich
[*]RAM : 512MB
[*]Internal Memory 4GB
[*]Expandable Memory MAX support upto 64GB Class 12 Micro SD Memory Card (TF-Card)
[*]Screen 5.2-inch Capacitive multi-touch screen (5 points), WVGA: 480 x 800, 16 Million Colors
[*]Network Dual SIM Dual Standby, supports WCDMA+EDGE or EDGE+EDGE
[*]2G： Yes (GSM:850/900/1800/1900 MHz)
[*]3G： Yes (2100 MHz)
[*]Built in Sim card Slot (Dual SIM)
[*] Supports GSM/GPRS/EDGE/WCDMA HSPA
[*]GPS Built In A-GPS, supports voice navigation
[*]Connection Bluetooth with EDR & A2DP
[*]Wi-Fi : IEEE 802.11 b/g/n, WiFi Hotspot functionality, Tethering & portable hotspot
[*][ Micro USB 2.0
[*]Camera Dual Camera
[*] Back 8MP with Auto focus and Flash LED
[*] Front 0.3 Mega pixel
[*]Sensor Gravity Sensor, Proximity Sensor, Light Sensor]
[*]Color Black
[*]Video Playback Video playback and recording, supported formats: 3GPP, MP4, 720P(1280 x 720)
[*]Video Formats AVI , MP4 , FLV , 3GP , MOV , ASF , MPEG , RMVB , etc.
[*]Audio MP3 , AAC , WAV , etc. / 3.5 mm Audio jack
[*]Size 147 × 86 × 9.7 mm
[*]Weight 165 g
Accessories
Battery : 2800mAh and 180 hours of standby time
(2*2800mAh) 1 Battery Free
Earphone / 3.5 mm Audio Jack
USB Cable
Charger
The following is the Company Website
http://www.nxgelectronics.in/xfab.html
I have attached the screenshots, which were taken from my Xfab.
Device is Very good.
I have used Some Roms from Russian Forum (forum.china-iphone.ru) and posted here.
Developers, Please help here for Custom ROMs
NXG ORIGINAL STOCK ROM here
http://www.nxglabs.in/nxgblog/?p=324
THE FOLLOWING, DO AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR ANY FAILURE DUE TO MISTAKE. BUT WHILE DOING SAFELY, THERE WILL BE NO DEIVCE BRICK
ROOTING:
I rooted through Tpsparky Root. Thanks to Mr.SparkyM3 . I have attached the file for rooting to all friends.
First install the MTK 6575 driver in the system (PC).
Enable 'USB debugging' mode in mobile (settings - developer options)
connect mobile through USB cable to the PC
turn on file copy mode in mobile
Then simply click the bat file and proceed with instructions.
CLOCKWORK MOD RECOVERY
THANKS TO RUSSIAN developer - Mr.Arsenev.
I have attached the link to clockworkmod recovery. But, the file is complete Rom. So, you have to download complete Rom files.
Flash through Smartphone flash tool and Good guide is here - http://bm-smartphone-reviews.blogspot.in/2012/05/mt6575-flashing-tutorial.html
Remove the recovery file from the downloaded Rom files and replace the attached recovery file. I dont know to separetly to flash the recovery. If anybody know, Please help. So, while flashing only select 'Recovery' and follow the 'bm-smartphone' guide. Your downloaded Rom is not waste, because that is 23.07.2012 build. so you can use also that Rom. But anyway stock rom is best.
Link for 23.07.12 build - http://narod.ru/disk/60288821001.67...723_e1808_v75_hjy1a6x__Flashtool_4.0.zip.html
Lewa TWRP recovery - given by Mr.black_cappucino - http://forum.xda-developers.com/showpost.php?p=36880132&postcount=17
you can install as the same method as above (clockworkmod recovery).
or - through Mobileuncle tools.. but I didnt test through Mobileuncle tools. I have attached the mobile uncle tools apk
AXIOO TOUCH RECOVERY - V.2.3.2.3
Works well in Our mobile. It is designed for AXIOO Picopad 5 GEA (Same Our Mobile - Indonesian Brand name is that) by Mr. insane ranting
Thanks to the Expert. Tested by me. 100% working.
Link here - http://www.jfdesignnet.com/?p=2804
Flash through the flash tool, as same as previous methods.
CUSTOM ROM
CUSTOM ICS:
1. Ok.. ICS 4.0.6 (modified as 4.0.6) ,custom ROMs are here
http://forum.china-iphone.ru/viewtopic.php?p=659135#p659135
Use google translate in browser. Because page is in Russian.
It is made by Mr.Alexey arsenev, russian developer for Star N8000. He told that it will match exactly to Dapeng A9230+. So I tried, and it exactly matched.. All tweaks are good. Rom is Very fast. "Awesome Beats" in this Rom is Excellent.. No need to buy Beats headphones.. Medium quality earphones are enough.. So, if you want , try.
2. Mr. black_cappucino' s CUSTOM ICS ROM - http://forum.xda-developers.com/showpost.php?p=36899596&postcount=18
3. GIONEE GN868 ROM (Micromax A90) - Stock ROM works well. has little problems. but we can solve that.
Little problems - we can solve that.
a. no signal - copy 'modem.img' from your stock rom (\system\etc\firmware) into GN868's Rom - same folder and change permissions (rw-r--r--)
b. bluetooth, wifi crashing - copy 'mtk_stp_wmt.ko' from your stock rom (\system\lib\modules) into GN868's Rom - same folder and change permissions (rw-r--r--)
Use your's stock ICS boot.img in the downloaded ROM .
Flash through Recovery.
Done .. Rom will be perfect.
Specialities in this ROM - 1. ICS Onscreen keys. 2. stock launcher with themes..
Link - http://www.romzj.com/index.php?option=com_mobile&task=download&id=4144&from=rom
4. SAMSUNG STYLE ROM - LENOVO A750 - works good in our mobile.
Specialities - Samsung Style ROM, Sony Bravia Engine, Dual Sim dialer.. etc..
works well. wifi problem one thing. for this you copy 'mtk_stp_wmt.ko' from your stock rom (\system\lib\modules) into This Rom - same folder and change permissions (rw-r--r--)
link - http://dl.vmall.com/c0pyvnub9y
Use your stock ics 'boot.img' in the downloaded Rom and flash through recovery.
1. LEWA OS
Link - http://narod.ru/disk/63368595001.b7...2.10.26_v_i9220_mod3rus_orkyz(zp100).zip.html
Flash through Clockworkmod Recovery.
Actually this rom is for 'Haipai I9220' device and It is from Russian Developer.
Credits go to 'Mr.MrorkyZ' - Russian Developer.
1 bug - There is no analog tv.
1.a) - LEWA LATEST BUILD (I tested)
http://disk.yandex.com/public/?hash=iNuFH9XZGuKIDKQiB8/qA3mkmt/zZRlVlRU1jgZptfY=
CREDITS GOES TO MR. SASHAML (RUSSIAN DEVELOPER - forum.china-iphone.ru)
No bugs for me... But there is no analog tv.
I have attached new LEWA BOOT IMAGE (zip file- you have to unzip) made by Mr. Vetal-ok , Russian Developer through my Request. All credits go to him. So replace the lewa boot image in the downloaded Lewa ROM.. means.. you have to unzip the file and replace the boot image, then again you have to make a zip for flashing through recovery..
2. MIUI
MIUI V4 works good in Our device.Only one problem (for me) - There is no analog TV. Firmware is from Haipai i9220 (Russian) forum.
Thanks to Mr.Cepexa and Mr.back37 , Russian Developers for their modified MIUI boot image for Our device.
Thanks to Mr.SashaML, Russian Developer for his MIUI firmware
Firmware Link - http://files.mail.ru/K0QEMD
1. Flash the firmware through clockworkmod Recovery.
2. Flash the 'attached 'dapeng A9230+ MIUI boot image' through clockworkmod recovery.
2.a) MIUI latest build here
http://files.china-iphone.ru/68rus_MIUI_10.12.12_i9220_e1809c_v75_gq1008_9p017.zip
CREDITS GOES TO ISTOMIN36 (RUSSIAN DEVELOPER - forum.china-iphone.ru)
Sorry friends.. the old attached MIUI boot image has camera shot problem.
So dont use. I have attached the new miui boot image .. Use that.
This New boot image also created by Mr.Vetal-ok, Russian developer (forum.china-iphone.ru)
After flashing the downloaded MIUI Rom file, flash the MIUI boot zip file through recovery.
Help please, Any Developer to port the original rom
Hellow Any Developer
Please help. I successfully rooted the device.
But I softbricked my device due to my simple mistake. While using ROM Toolbox lite, I tried to change the font.
I have no problem, while changing the fonts (downloaded through ROM toolbox}, I successfully changed the fonts.
But Yesterday night, I changed the font from local folder of device , Afterthat the device is not booting..Only Android logo.....
So I have to reflash the fimware... Any developer having firmware of this device..... please help..
In service center (chennai, India), also still Firmware not available...
I have seen the firmware topic in the following Russian website.
http://forum.china-iphone.ru/viewtopic.php?f=46&t=20476
But I cant understand clearly, because of unknown language (even using Google translator also)
So, please any Russian mates or Developers or Any Developer , please help.. Because I have no standby mobile..
Thanks.
Please send a mail to NXG - Pune (i am sure they will help you)
Dear Ramsuresh
Please send a mail to NXG-Pune and make a call to them, they will definetly send you firmware link & guide you
By the way
have tried factory reset from Recovery Mode...?
Regards
Arumugam
ramsuresh4 said:
Hellow Any Developer
Please help. I successfully rooted the device.
But I softbricked my device due to my simple mistake. While using ROM Toolbox lite, I tried to change the font.
I have no problem, while changing the fonts (downloaded through ROM toolbox}, I successfully changed the fonts.
But Yesterday night, I changed the font from local folder of device , Afterthat the device is not booting..Only Android logo.....
So I have to reflash the fimware... Any developer having firmware of this device..... please help..
In service center (chennai, India), also still Firmware not available...
I have seen the firmware topic in the following Russian website.
http://forum.china-iphone.ru/viewtopic.php?f=46&t=20476
But I cant understand clearly, because of unknown language (even using Google translator also)
So, please any Russian mates or Developers or Any Developer , please help.. Because I have no standby mobile..
Thanks.
Click to expand...
Click to collapse
I solved my problem myself
UParumugam said:
Dear Ramsuresh
Please send a mail to NXG-Pune and make a call to them, they will definetly send you firmware link & guide you
By the way
have tried factory reset from Recovery Mode...?
Regards
Arumugam
Click to expand...
Click to collapse
Dear friends,
I solved my problem myself. I got firmware from Russian friends and flashed successfully before 2 days. My only little issue is back camera gives inverted shots. I am searching for rear camera driver. Other than everything is well.
After sending mail to NXG , they sent firmware after 4 days. But that firmware gives error (flash scatter file is invalid) and I cant flash the NXG firmware.
hi.just wanna ask..can this recovery.img used in dapeng i9877?
thehaikal said:
hi.just wanna ask..can this recovery.img used in dapeng i9877?
Click to expand...
Click to collapse
hi，This is for Dapeng A9230 ±. I am not sure that this is for your device. Make a nandroid backup of your Rom , Then you can test this recovery.
Sent from my Dapeng A9230± using xda app-developers app
Hit Thanks
Rooting file - 26 downloads, recovery image - 21 downloads.
no one hitting thanks ?
there is an original factory firmware from russia forum come with flashtool, will upload link if anyone need it..
Send from my GT-N7000 using xda premium
e1808_v75_hjy1a6x (build -20120723) on my device with processor speed 1200Mhz..
e1808_v75_hjy1a6x_5647 (build -20120905) run 1001Mhz on my device..
Now using e1808_v75_jbl2_20120807 from N8000 on my device with 1200Mhz speed (kernel & driver remain e1808_v75_hjy1a6x_20120723)
ramsuresh brother, bout the miui rom. can this rom make a video call?
Sorry. There is no video call option presently in the Miui rom for this device. Maybe near future It may come.
Sent from my Dapeng A9230+ using xda app-developers app
Sorry for Very late reply. The above posted Roms are from Russian forum (forum.china-iphone.ru) only.
Sent from my Dapeng A9230+ using xda app-developers app
black_cappucino said:
ramsuresh brother, bout the miui rom. can this rom make a video call?
Click to expand...
Click to collapse
Sorry. There is no video call option presently in the Miui rom for this device. Maybe near future It may come.
Sent from my Dapeng A9230+ using xda app-developers app
alanccs said:
there is an original factory firmware from russia forum come with flashtool, will upload link if anyone need it..
Send from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sorry for Very late reply. The above posted Roms are from Russian forum (forum.china-iphone.ru) only.
Sent from my Dapeng A9230+ using xda app-developers app
People are simply downloading the files. No thanking mind. Only two persons have thanked me here. I am not a developer. But i have worked hard for this device..
thx for replying broth. maybe another trick for 3g video call? i think to add ics dialer or samsung dialer or something. not yet test, still wanna know your opinion broth.
Lewa TWRP Ported from stok fw
try this twrp broth. full touch. i use this twrp for 2 weeks, no problem, all function normal.
uma_DROID v1.0
uma_DROID v1.0
Custom ROM for Axioo PicoPad 5 (Indonesia)
[ Also Work for DAPENG A9230 - we have same machine]
HI guys, i made this custom rom just for fun. this is for Axioo PicoPad 5 GEA ( Indonesia). Actually have same machine with Dapeng a9230, so maybe you can install it to your device ( Im sure you can). Because i found the rusian stock rom for dapeng, and flash it to my GEA, and work like charm with no single problem on my GEA till now, thats why im sure you can install it to dapeng.
Thats it guys. Please read the information and the how to before you flash this rom. I have no responsibility if you brick your device because flash this rom to your device. Flash and Mod with your own RISK...!!!
- Lewa TWRP & Patch for 2GB System storage/500MB Internal sdcard included.
Code:
[CENTER]uma_DROID 1.0
ROM :
- 20120723_e1808_v75_hjy1a6x fw based
- Stock Axioo boot animation found inside axioo picopad 5 gea on facebook group
- 200dpi
- build.prob tweaked into Samsung galaxy tab 2, so you can install all apps inside market
- Moded Play store for density modifier, so you can change your lcd density to any value you want but you can install all apps inside market
- X-peria Launcher ported (my fav launcher ever)
- Jelly Bean Camera & Gallery found inside axioo picopad 5 gea on facebook group
- Keyboard : android keyboard (ics), X-peria keyboard & Samsung Keypad.
- No Live wallpaper, home screen tips
- No apps like facebook, ym, twitter, etc
- font changed to alex
- battery and wireless icon changed
- usb storage android logo changed to red devil android
- Sonny bravia engine tweak enabled
- better gps configuration for Indonesia
- init.d tweaks for : fast internet browsing, improved battery life, touchscreen more responsiv, little bit kernel tweak, zipalign all apks every boot, improve speed for x-peria launcher.
- build.prob tweaks for : better picture quality, better recording quality, lock launcher to memory, battery life, kernel error check disabled, more more deeper sleep, 3g tweaks, no black screen after call, video streaming, hsupa enabled, android logger disabled, dns tweak from common linux use google dns, & many more.
- default 500mb system and 2gb internal sdcard (use 2gb system storage to get 2gb system storage & 500mb internal sdcard - *zip file included)
- Lewa TWRP included (if you want, flash recovery via spft first or you can install it via mobileuncle after flashing this rom)
how to :
PLEASE BACKUP FIRST. If you brick your gea, i have no responsibilty for that.
PLEASE BACKUP IMEI FIRST. unless you will traped on invalid imei problem.
- download the file, extract it.
if you want, you can flash "2gbsystorage.zip" via recovery to turn your system into 2gb and internal sdcard into 500mb before you flash the custom rom.
inside you will find an archive named "uma_DROID_v1.0.zip". copy it to your sdcard, boot into recovery, and please DONT FORGET TO WIPE DALVIK, CACHE, & WIPE your device unless you will traped inside bootloop.
done.
note : If you want your phone rooted, install the "2gbsystorage.zip" after you flash the ROM, or if you want to flash the "2gbsystorage.zip" before you flash the ROM, you can r00t your phone via rooting tools[/CENTER]
DOWNLOAD :
HERE...!!!
black_cappucino said:
uma_DROID v1.0
Custom ROM for Axioo PicoPad 5 (Indonesia)
[ Also Work for DAPENG A9230 - we have same machine]
HI guys, i make this custom rom just for fun. this is for Axioo PicoPad 5 GEA ( Indonesia). Actually have same machine with Dapeng a9230, so maybe you can install it to your device ( Im sure you can). Because i found the rusian stock rom for dapeng, and flash it to my GEA, and work like charm with no single problem on my GEA till now, thats why im sure you can install it to dapeng.
Thats it guys. Please read the information and the how to before you flash this rom. I have no responsibility if you brick your device because flash this rom to your device. Flash and Mod with your own RISK...!!!
- Lewa TWRP & Patch for 2GB System storage/500MB Internal sdcard included.
Code:
[CENTER]uma_DROID 1.0
ROM :
- 20120723_e1808_v75_hjy1a6x fw based
- Stock Axioo boot animation found inside axioo picopad 5 gea on facebook group
- 200dpi
- build.prob tweaked into Samsung galaxy tab 2, so you can install all apps inside market
- Moded Play store for density modifier, so you can change your lcd density to any value you want but you can install all apps inside market
- X-peria Launcher ported (my fav launcher ever)
- Jelly Bean Camera & Gallery found inside axioo picopad 5 gea on facebook group
- Keyboard : android keyboard (ics), X-peria keyboard & Samsung Keypad.
- No Live wallpaper, home screen tips
- No apps like facebook, ym, twitter, etc
- font changed to alex
- battery and wireless icon changed
- usb storage android logo changed to red devil android
- Sonny bravia engine tweak enabled
- better gps configuration for Indonesia
- init.d tweaks for : fast internet browsing, improved battery life, touchscreen more responsiv, little bit kernel tweak, zipalign all apks every boot, improve speed for x-peria launcher.
- build.prob tweaks for : better picture quality, better recording quality, lock launcher to memory, battery life, kernel error check disabled, more more deeper sleep, 3g tweaks, no black screen after call, video streaming, hsupa enabled, android logger disabled, dns tweak from common linux use google dns, & many more.
- default 500mb system and 2gb internal sdcard (use 2gb system storage to get 2gb system storage & 500mb internal sdcard - *zip file included)
- Lewa TWRP included (if you want, flash recovery via spft first or you can install it via mobileuncle after flashing this rom)
how to :
PLEASE BACKUP FIRST. If you brick your gea, i have no responsibilty for that.
PLEASE BACKUP IMEI FIRST. unless you will traped on invalid imei problem.
- download the file, extract it.
if you want, you can flash "2gbsystorage.zip" via recovery to turn your system into 2gb and internal sdcard into 500mb before you flash the custom rom.
inside you will find an archive named "uma_DROID_v1.0.zip". copy it to your sdcard, boot into recovery, and please DONT FORGET TO WIPE DALVIK, CACHE, & WIPE your device unless you will traped inside bootloop.
done.
note : If you want your phone rooted, install the "2gbsystorage.zip" after you flash the ROM, or if you want to flash the "2gbsystorage.zip" before you flash the ROM, you can r00t your phone via rooting tools[/CENTER]
DOWNLOAD :
HERE...!!!
Click to expand...
Click to collapse
wow,great rom dude,i want to try it..but can you tell me how to back up imei?just in case if i get imei invalid,and what is the lewa twrp??
sorry for my noob,i'm new on this thing..
@Galon123
dude, to back up your imei, your phone must be r00ted. open your root explorer or similiar, go to " /data/nvram/md/NVRAM/NVD_IMEI/ ". You will find a file named "MP0B_001", copy it to your sdcard or maybe pc/laptop for future use. So you can paste it into the same folder, and you get your imei back if in case you traped inside "Invalid Imei" problem.
---------- Post added at 10:44 AM ---------- Previous post was at 10:39 AM ----------
Galon123 said:
wow,great rom dude,i want to try it..but can you tell me how to back up imei?just in case if i get imei invalid,and what is the lewa twrp??
sorry for my noob,i'm new on this thing..
Click to expand...
Click to collapse
black_cappucino said:
@Galon123
dude, to back up your imei, your phone must be r00ted. open your root explorer or similiar, go to " /data/nvram/md/NVRAM/NVD_IMEI/ ". You will find a file named "MP0B_001", copy it to your sdcard or maybe pc/laptop for future use. So you can paste it into the same folder, and you get your imei back if in case you traped inside "Invalid Imei" problem.
Click to expand...
Click to collapse
double post sorry.
Lewa TWRP :
Lewa (TWRP) touch recovery is a custom recovery built with ease of use and customization in mind. It’s a fully touch driven user interface, no more volume rocker or power buttons to mash.
Features:
-Graphical touchscreen interface with buttons and drag-to-scroll!
-Compressed backups that can save you up to 50% disk space
-Ability to choose which partitions to back up and which to restore
-Custom names for backups, rename and delete backups inside recovery
-Install Zip from SD card or internal storage
-Integrated Terminal Emulator
-Install queues allow you to install multiple zips in one go (e.g. CM9 zip together with gapps zip)
-Easy one-button cache & dalvik cache clearing after an installation
-Recovery settings are saved to the sdcard and persist through reboots
-File Manager that allows you to move, copy, delete and rename files and change their permissions
-Battery percentage indicator and clock (set your timezone in settings!)
-Power Off option
-Ability to partition SD Card with EXT3 or EXT4
-ADB support
-Detailed logfile
note : copy/paste from here.
Welcome to MIUI rom for HDC s4 legend
This is not a rom made by me.The original post is this:
kaskus.co.id/show_post/52b892033ecb1710098b472e/136/rom-23-des--miui-legend
***********************************************
Instructions to Install:
instructions:
1.download 4 files in rar and extract them , should give MIUI Legend.zip
2.copy to sd card
3. boot your HDC in recovery mode (CMW)
4. wipe data/factory reset and wipe cache partition
5. advanced , wipe dalvik cache
6. install zip from SD card , choose MIUI Legend.zip
7. wait until HDC restart
8. get back into recovery ( vol up + power )
9. wipe cache partition
10. enjoy MIUI in your HDC Legend..
***********************************************
Pro:
- Super Fast, simple and good looking rom;
- Better wi-fi;
- Google play pre-instaled;
- Comes with S-voice, Mobile Uncle tools, flash player.
- No Bloat-ware
- Last Miui version(v5);
- Supports 3g;
- Gps, but no google maps pre-instaled;
Cons:
- Some languages not available;
- No air-gestures, smart pause and any of that features.Only proximity sensor work. (need some confirmation here about the air gestures);
- Seems that updater doesn't work, unfortunately, because Miui is constantly upgrading...
- Bugs:
- Led always on(blue), still figure it out why. But changes to red when charging etc...
- Seems that the camera loses quality;
- Shows some numbers on instead of the name of network provider; (see image attached) fix:http://en.miui.com/thread-5708-1-1.html
Besides some bugs, is a good alternative to other roms, but lacks some of the features of this phone.
I'm not a developer, so i hope that some one pick up this rom and try to resolve some of the problems and make a deep test to all phone.
Link:
http://www.mediafire.com/download/5i7a35mlxfxyq63/MIUI Legend.zip
This ROM is official ported for Lenovo S920 by developer taken from Lewa. This is dev version, but as my experience this is better than Stable version.
Please note this ROM is only for CN based partition. I never try it on ROW based.
I'm just doing some tweak and fix on this ROM.
- Camera tweaked 12 MP.
- Magnetic Sensor fully working
- Removing some bloatware
- Change Sogou input to Google Keyboard
- Adding basic gapps (Play Store, Talkback, Google Search, Google Voice, etc)
- Remove Calendar365 (chinese apps) to Google Calendar.
How to :
- Reboot to CWM/TWRP recovery
- Factory reset
- Wipe cache - dalvik cache
- Format system
- Install the zip file
- Reboot and wait 5 to 10 minutes
- Enjoy
* if it's not booted more than mentioned time, pull back the battery and try to install again. If it's still won't so this ROM is not for you.
* Do with your own risk. I have no resposibility to anything happens with your device.
Click Here to Download
Thanks
For original ROM please go to Lewa official website http://www.lewaos.com/en/
[[ROM][PORT][ LOLLIPOP 5.0]- [2.1] FUNTOUCH OS 2.1- ULEFONE BE TOUCH 2
This is yet another Port by me for Ulefone Be Tocuh 2 , This is ported from Vivo X5 Pro D
*************** Please take a Backup before proceeding ***********************!!!!DISCLAIMER:Rooting your phone and using custom ROMS have risks, You may brick your Device if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup of your phone before proceeding ....Blah blah ......blah !!!!!
KEY FEATURES OF ROM
• Smooth and Good looking
• New UI with new features
• Smooth Touch , Fast . Battery Saver
• Optimization done with L Speed 3.0 ( Credits goes to XDA LSpeed Developers and team @skyinfo @F4uzan @aidasaidas75 @skyinfo @Maltonator @k1ks @slaid480 @ArjunrambZ @pizza_dox @k1ks @Plamb1r @SecDet @Exit_Only @ansebovi- Thanks to their efforts .
• Firmware changed with TCL M2M Phone (excluding Modem)
• Modem Changed to Sony C4 ( no more wifi and connection drop problem)
• Good Camera UI with beauty and other features
• Chinese and English Language only.
• All Bloatware removed
• Antutu Score 45000+
• Music Player and Sound improved
Bugs – Error message while connecting phone to laptop /PC with SD storage mounted “ Vivo service stopped . Click ok and Rom works as normal , if you want to go any other mode click ok fast and switch to other USB mode fast .
Not completed – Finger Sensor Support ..I have decoded the code but needs guidance to recompile and infuse help needed from senior developers. If anyone wants to help please PM me.
INSTRUCTIONS:
1. Download Rom and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Data ,System and Dalvik cache partition and swipe for Formatting.
6. Flash ROM = wait until finish
7. First time boot after flashing takes time ..please be Patient
Note :::: Please Do NOT Auto Update .Vivo Will try to push update for its Vivo Phone thinking that it is Vivo X5 Pro .. but It is not ::laugh:GAPPS INSTRUCTIONS:
Please use only GAPPS given in the thread any other GAPPS will not work due to limitation in the system partition which Mr Ulefone created small size of System Partition .If you encounter Google Play service error after flashing GAPPs Run the APK given .Install Gapps after Flashing the ROM if service error ..Install the Google Service APKL-Speed Installation:
1. Download L_SPEED_V3.2_OVERSEER_arm and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Dalvik cache partition and swipe
You may see the noticible difference after installation the package , Please Convey Thnaks to develpoers who were part of the project for lollipop 5DOWNLOADS
ROM
https://mega.nz/#!rJglDQbL!WkKMhXDeWa_mu8ZnV0alV23toua-hAksFaaWfHkM5ew
GAPPS
https://mega.nz/#!XBpAzRiS!Ozj59WvF...Bqw4lswfpR6Rsga6xH_pnswIflEgkBfiSIzI[/CENTER]
awesome
Thanks for a new rom for the device. The rom download is in progress, but the gapps requires a password to decrypt.. Hopefully someone can help assist with the finger print scanner as im sure the rom would be perfect. I enjoy your other ports and thats the only thing lacking in them all. Cheers !:good:
dr3adl0ckd said:
Thanks for a new rom for the device. The rom download is in progress, but the gapps requires a password to decrypt.. Hopefully someone can help assist with the finger print scanner as im sure the rom would be perfect. I enjoy your other ports and thats the only thing lacking in them all. Cheers !:good:
Click to expand...
Click to collapse
Thanks Mate ..links updated again
shanky76 said:
Thanks Mate ..links updated again
Click to expand...
Click to collapse
np. sir You do great work, i barely seen your reply but found the gapps was gonna go and update here and the other site you post too as well as i wasn't sure when you would get back on. I work for a web hosting company using linux servers and what not. Not sure if it would work like this but since its a port, is it possible to use the "working directory" for the finger printer scanner from say maybe the elephone p7000 port rom for the ulefone to your rom's finger print "working directory" since it does indeed work on that rom as it has the same hardware as our device? I tried google searches to see where that information is placed in the rom system directory but could not find anything.
best regards,
dr3adl0ckd said:
np. sir You do great work, i barely seen your reply but found the gapps was gonna go and update here and the other site you post too as well as i wasn't sure when you would get back on. I work for a web hosting company using linux servers and what not. Not sure if it would work like this but since its a port, is it possible to use the "working directory" for the finger printer scanner from say maybe the elephone p7000 port rom for the ulefone to your rom's finger print "working directory" since it does indeed work on that rom as it has the same hardware as our device? I tried google searches to see where that information is placed in the rom system directory but could not find anything.
best regards,
Click to expand...
Click to collapse
There are number of changes required . I can send you the changes if you like ...
boot .img .. decompile make the changes for Finger print sensors.
ETc, Lib , Bin , App these are the places where we need to make changes ... not getting enough time to do all these ..I will try once festive season is over in india
Tutorial with video
I want upgrade vivo x3s , but i cant... give me tutorial with video ... because im newbie.
Thsnks......
Sir i'm new in flashing roms and stuff, i have a 4.4.4 Kitkat phone that doesn't have lolipop update, how do i make this my ROM?
how do we download marshmallow for vivo x5pro? the links that are provided they promted you to fill a survey, but when you click on it says error. havent been able to find a way to download the roms for vivo x5 pro. any help please?
shanky76 said:
[[ROM][PORT][ LOLLIPOP 5.0]- [2.1] FUNTOUCH OS 2.1- ULEFONE BE TOUCH 2
This is yet another Port by me for Ulefone Be Tocuh 2 , This is ported from Vivo X5 Pro D
*************** Please take a Backup before proceeding ***********************!!!!DISCLAIMER:Rooting your phone and using custom ROMS have risks, You may brick your Device if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup of your phone before proceeding ....Blah blah ......blah !!!!!
KEY FEATURES OF ROM
• Smooth and Good looking
• New UI with new features
• Smooth Touch , Fast . Battery Saver
• Optimization done with L Speed 3.0 ( Credits goes to XDA LSpeed Developers and team @skyinfo @F4uzan @aidasaidas75 @skyinfo @Maltonator @k1ks @slaid480 @ArjunrambZ @pizza_dox @k1ks @Plamb1r @SecDet @Exit_Only @ansebovi- Thanks to their efforts .
• Firmware changed with TCL M2M Phone (excluding Modem)
• Modem Changed to Sony C4 ( no more wifi and connection drop problem)
• Good Camera UI with beauty and other features
• Chinese and English Language only.
• All Bloatware removed
• Antutu Score 45000+
• Music Player and Sound improved
Bugs – Error message while connecting phone to laptop /PC with SD storage mounted “ Vivo service stopped . Click ok and Rom works as normal , if you want to go any other mode click ok fast and switch to other USB mode fast .
Not completed – Finger Sensor Support ..I have decoded the code but needs guidance to recompile and infuse help needed from senior developers. If anyone wants to help please PM me.
INSTRUCTIONS:
1. Download Rom and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Data ,System and Dalvik cache partition and swipe for Formatting.
6. Flash ROM = wait until finish
7. First time boot after flashing takes time ..please be Patient
Note :::: Please Do NOT Auto Update .Vivo Will try to push update for its Vivo Phone thinking that it is Vivo X5 Pro .. but It is not ::laugh:GAPPS INSTRUCTIONS:
Please use only GAPPS given in the thread any other GAPPS will not work due to limitation in the system partition which Mr Ulefone created small size of System Partition .If you encounter Google Play service error after flashing GAPPs Run the APK given .Install Gapps after Flashing the ROM if service error ..Install the Google Service APKL-Speed Installation:
1. Download L_SPEED_V3.2_OVERSEER_arm and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Dalvik cache partition and swipe
You may see the noticible difference after installation the package , Please Convey Thnaks to develpoers who were part of the project for lollipop 5DOWNLOADS
ROM
https://mega.nz/#!rJglDQbL!WkKMhXDeWa_mu8ZnV0alV23toua-hAksFaaWfHkM5ew
GAPPS
https://mega.nz/#!XBpAzRiS!Ozj59WvF... someone port this Funtouch OS to HTC one m7?
Click to expand...
Click to collapse
Can I install this on my vivo y28 ?
My phone SM-J110h How support ViVO rom
kernel version ??
[ROM][MidgarD V1.0] EMUI 5.1 Huawei Mate 10 Lite by Catuva21
ROM MORFUZ V 1.0 - EMUI 5.1. HUAWEI MATE 10 LITEKANGVIP RNE-B178-V2Aroma Installer
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
Hello with all, recently I bought this terminal RNE-L23C605, and made roms for a huawei P9 Lite, now I will make some for this great cell phone, well let's start:
COMPATIBLE WITH
L23C605-L03C605
L21C432-L01C432
L21C900-L01C900
L02C636-L22C636
AL00C00
L21C10
L21C33
L21C185
L01C55
L21C738
L22C569
L22C635
L22C675
L03C178
L02C346
REQUIREMENTS:
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows
DETAILS OF THE ROM
- base kangvip-RNE-v178-v2
- You can modify the number of icons in the notification panel mode and the navigation bar.
- highly modifiable, do not modify screen resolutions
- is based on the last update of L21C435B135 (security patch April)
- installation mode aroma installer
- Kernel TeamPhenom 1.0
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- Optimization for performance games, and battery.
- It eliminated unnecessary google applications.
- Facial unlocking for other compilation that does not yet have it.
- Sound with Huawei Histen effect
- VOLTE activated
INSTALLED APPLICATIONS
- Full Call Recorder
- Youtube Mod (function in the background)
- Musica huawei Crack
HIDDEN FUNCTIONS ACTIVATED
- added more applications of social networks of Twin cloning
- Multi User X5
INSTALLATION MODE:
if it is the first time you install the recovery twrp follow these steps:
-guard the rom in an external memory.
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- Press FORMAT DATA
- Write the word "yes" without quotes and accept, just do the work
- Press BACK to go back several times to the main window.
- Press reboot
- Press recovery
- Press Not Install or slide
- Automatically restart in recovery stock
- again see Pulsar WIPE
- Press ADVANCE WIPE
- Mark only DATA
- Press REPAIR OR CHANGE FILE SYSTEM
- As you will see in the upper part, this is in EXT4 or MNC format, which is not adequate and we must change.
- press CHAGE FILE SYSTEM
- Press F2FS and slide, then back to the window of the wipes.
- Now we will perform a system cleaning.
- mark: Dalvik, Cache, data, internal storage (optional), system, vendor, and product
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Search the rom select your taste in aroma installer.
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- then reboot system, it expects to take approximately 10min.
if you already installed a rom be stock or custom rom follow these steps:
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- mark: Dalvik, Cache, data, internal storage (optional), system, vendor, and product
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Search the rom select your taste in aroma installer.
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- then reboot system, it expects to take approximately 10min.
AROMA INSTALLER
with aroma installer can selection
stock kernel or TeamPhenom
types of fonts
the root that you like or without root
You can also add
applications: like solid explorer, hbef, kernel auditor, quick reboot.
dolby atmos and viper.
NEXT WORK ROM MORFUZ BASED ON KANGVIP
Source Codes:
GPLv1: https://github.com/catuva21/kernelRNE-EMUI5.1
Contributors:
CATUVA21
KangV & Team HRT for KangVIP framework
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C435B135 EMUI5.1
ROM Kernel: TeamPhenom
ROM Firmware Required: EMUI 5.1
Version Information:
Status: Stable
Created on: 2018-04-09
Last Updated on: 2018-04-09
Images
Download Links:
Morfuz 1.0
Recovery Twrp 3.1.1.0
my Blog link
Removed
if it is left without call and notification sounds, download, unzip and paste into the internal memory.
click link
give thanks and if you want to support the donations link is below
reservet2
Good rom @CATUVA21, but juste one question : is it normal not to have facial unlocking? I'm in l21c185
gmbengue said:
Good rom @CATUVA21, but juste one question : is it normal not to have facial unlocking? I'm in l21c185
Click to expand...
Click to collapse
I apologize that the previous rom did not respond, now observe and there was the added codes, use this file and paste in:
version/special cust/ RNE-L21/hw/meafnaf/prop/local.prop
use solid explorer and replace local.pro and restart the cell phone
CATUVA21 said:
I apologize that the previous rom did not respond, now observe and there was the added codes, use this file and paste in:
version/special cust/ RNE-L21/hw/meafnaf/prop/local.prop
use solid explorer and replace local.pro and restart the cell phone
Click to expand...
Click to collapse
Can't open system from solid explorer, and in twrp/file manager can't see version folder ! maybe something wrong with my installation. I do everything, one by one, like you say. but the rom is working.
Unable to instal magisk too
gmbengue said:
Can't open system from solid explorer, and in twrp/file manager can't see version folder ! maybe something wrong with my installation. I do everything, one by one, like you say. but the rom is working.
Unable to instal magisk too
Click to expand...
Click to collapse
Did u tried install Magisk Manager ?
TheSparta said:
Did u tried install Magisk Manager ?
Click to expand...
Click to collapse
Thanks Thesparta it's good
@CATUVA21 :good: Facial unlocking is here now and working well ! thanks for your job and the time you take for us !
just one thing (the last) when I plug earphone, the sound is low, even if I amplified it from viper4android. any idea?
gmbengue said:
Thanks Thesparta it's good
@CATUVA21 :good: Facial unlocking is here now and working well ! thanks for your job and the time you take for us !
just one thing (the last) when I plug earphone, the sound is low, even if I amplified it from viper4android. any idea?
Click to expand...
Click to collapse
I think that the local.prop solved my problem of sound, now it's good.
For the rom, some bugs : Emui Music is only in espagnol and chiness (I think), Mipop crash when longpress back key to kill app, and in motion control/pick up/wake up device can't be activated, doubletap2wake freeze the screen, you have to reboot
exept that, all is good. sorry for my bad english
Phone soft reboots when receiving a call.How can I fix it ?
my phone restart
my phone restart when receiving call
TheSparta said:
Phone soft reboots when receiving a call.How can I fix it ?
Click to expand...
Click to collapse
---------- Post added at 06:20 PM ---------- Previous post was at 06:10 PM ----------
dear bro @TheSparta followe this step
CATUVA21 said:
I apologize that the previous rom did not respond, now observe and there was the added codes, use this file and paste in:
version/special cust/ RNE-L21/hw/meafnaf/prop/local.prop
use solid explorer and replace local.pro and restart the cell phone
Click to expand...
Click to collapse
I'm using RNE-L22, I can't enter the K Advanced Setting, it just crash. Please help.
CATUVA21 said:
[ROM][MidgarD V1.0] EMUI 5.1 Huawei Mate 10 Lite by Catuva21
ROM MORFUZ V 1.0 - EMUI 5.1. HUAWEI MATE 10 LITEKANGVIP RNE-B178-V2Aroma Installer
Code:
-
- I am not responsible for the damage of your cell phone if you do not correctly perform the steps
- loser warranty
- if you are not sure better not to touch and leave this page
Hello with all, recently I bought this terminal RNE-L23C605, and made roms for a huawei P9 Lite, now I will make some for this great cell phone, well let's start:
COMPATIBLE WITH
L23C605-L03C605
L21C432-L01C432
L21C900-L01C900
L02C636-L22C636
AL00C00
L21C10
L21C33
L21C185
L01C55
L21C738
L22C569
L22C635
L22C675
L03C178
L02C346
REQUIREMENTS:
- Activate the OEM unlocking, which is in adjustment / developer options and leave it so forever to avoid conflict.
- unlock the bootloader.
- install the recovery that I will leave, automated from windows
DETAILS OF THE ROM
- base kangvip-RNE-v178-v2
- You can modify the number of icons in the notification panel mode and the navigation bar.
- highly modifiable, do not modify screen resolutions
- is based on the last update of L21C435B135 (security patch April)
- installation mode aroma installer
- Kernel TeamPhenom 1.0
- eliminated the data space.
- Deodexed (improves optimization)
- Improvements in the quality of photos, video and sound.
- Optimization for performance games, and battery.
- It eliminated unnecessary google applications.
- Facial unlocking for other compilation that does not yet have it.
- Sound with Huawei Histen effect
- VOLTE activated
INSTALLED APPLICATIONS
- Full Call Recorder
- Youtube Mod (function in the background)
- Musica huawei Crack
HIDDEN FUNCTIONS ACTIVATED
- added more applications of social networks of Twin cloning
- Multi User X5
INSTALLATION MODE:
if it is the first time you install the recovery twrp follow these steps:
-guard the rom in an external memory.
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- Press FORMAT DATA
- Write the word "yes" without quotes and accept, just do the work
- Press BACK to go back several times to the main window.
- Press reboot
- Press recovery
- Press Not Install or slide
- Automatically restart in recovery stock
- again see Pulsar WIPE
- Press ADVANCE WIPE
- Mark only DATA
- Press REPAIR OR CHANGE FILE SYSTEM
- As you will see in the upper part, this is in EXT4 or MNC format, which is not adequate and we must change.
- press CHAGE FILE SYSTEM
- Press F2FS and slide, then back to the window of the wipes.
- Now we will perform a system cleaning.
- mark: Dalvik, Cache, data, internal storage (optional), system, vendor, and product
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Search the rom select your taste in aroma installer.
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- then reboot system, it expects to take approximately 10min.
if you already installed a rom be stock or custom rom follow these steps:
- turn off the cell phone press the plus and power buttons until you have the TWRP window
- Press WIPE
- mark: Dalvik, Cache, data, internal storage (optional), system, vendor, and product
- IMPORTANT !: do not mark "micro sdcard".
- once you have marked, slide the "swipe to wipe" arrow to clear it.
- go back to the main sale, press INSTALL
- press SELECT STORAGE
- Switch to Micro SDCard to find the rom.
- Search the rom select your taste in aroma installer.
- At the end of the installation press "wipe davilk-cache", wait for it to finish.
- then reboot system, it expects to take approximately 10min.
AROMA INSTALLER
with aroma installer can selection
stock kernel or TeamPhenom
types of fonts
the root that you like or without root
You can also add
applications: like solid explorer, hbef, kernel auditor, quick reboot.
dolby atmos and viper.
NEXT WORK ROM MORFUZ BASED ON KANGVIP
Source Codes:
GPLv1: https://github.com/catuva21/kernelRNE-EMUI5.1
Contributors:
CATUVA21
KangV & Team HRT for KangVIP framework
Openkirin Recovery TWRP
ROM OS Version: RNE-L21C435B135 EMUI5.1
ROM Kernel: TeamPhenom
ROM Firmware Required: EMUI 5.1
Version Information:
Status: Stable
Created on: 2018-04-09
Last Updated on: 2018-04-09
Images
Click to expand...
Click to collapse
4G not working on RNE-L22C636. How to fix ???
@catuVA2
Advanced settings do not work do you have an idea why it doesn't work ?
to L21C432
ok Advanced settings works with Magisk root
gmbengue said:
Thanks Thesparta it's good
@CATUVA21 :good: Facial unlocking is here now and working well ! thanks for your job and the time you take for us !
just one thing (the last) when I plug earphone, the sound is low, even if I amplified it from viper4android. any idea?
Click to expand...
Click to collapse
How did u manage to find facial unlock? I'm also on c185 and it seems like there's no such option
Edit:
After adding 'ro.config.face_recognition=true' to local.prop File in /system/emui/base/prop the option showed up in settings but i am unable to register my face, any idea?
smon3k said:
How did u manage to find facial unlock? I'm also on c185 and it seems like there's no such option
Edit:
After adding 'ro.config.face_recognition=true' to local.prop File in /system/emui/base/prop the option showed up in settings but i am unable to register my face, any idea?
Click to expand...
Click to collapse
CATUVA21 said:
I apologize that the previous rom did not respond, now observe and there was the added codes, use this file and paste in:
version/special cust/ RNE-L21/hw/meafnaf/prop/local.prop
use solid explorer and replace local.pro and restart the cell phone
Click to expand...
Click to collapse
use this method
Im not getting 4G signal. Im using rne-l22 how to fix?
4g on status bar not disappearing
Hi! Thanks for the great ROM.
4g symbol on status bar is not disappearing even when WiFi and mobile data are turned on.
How to fix this? Thanks
makelsevilla said:
Hi! Thanks for the great ROM.
4g symbol on status bar is not disappearing even when WiFi and mobile data are turned on.
How to fix this? Thanks
Click to expand...
Click to collapse
In the settings app, under mobile data there's that "More" button. In the menu that opens when you click that, open mobile network and then turn off "Mobile Data Always On" option. Do the same to the one in the developer options if that's also turned on. No need to turn off the second one if you didn't unlock developer options though.