Database Info

How to root the CDMA Hero

Ok everyone. First off do not update your phone if Sprint offers an upate. I don't think they are going to but if they do anytime soon and you update this exploit could likely be fixed. When updates are released the devs will make updates that keep root so do not update!
That said, this is a very newbie guide. This is meant for Windows but I will post instructions for linux as well (Ubuntu). I just need to warn you that I can't adb into my phone from Ubuntu so I have to do it through Windows. Don't know why it doesnt work but it doesnt. Mac users you can always (assuming you can get it to work in Ubuntu) download a live cd and boot into Ubuntu to try this. I don't have a mac (nor do I want one) so I can't give instructions (though I assume they should be relatively the same).
Step 1:
First you need to download the Android SDK. It may soumd confusing but it's not. There are tools in here that we need. You can get it from http://developer.android.com/sdk/index.html. This is a modular SDK and all the tools we need are in this download. Once downloaded you just need to extract it in a directory of choice.
The next thing we download is asroot2. This is a script that was developed that runs an exploit in Android's linux that allows us to run root. The link for that is here: http://forum.xda-developers.com/attachment.php?attachmentid=244212&d=1257621154. Unzip that file and place it in a directory of your choice. Also download http://www.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=recovery-RA-heroc-v1.2.3.img and place that into the same directory you extracted asroot2.
Step 2:
Connect the phone to the USB port.
Ubuntu is easy for this (again assuming it works for you). Simply open a terminal and cd into the directory that you extracted the sdk into. Then cd into the tools directory. Then run the following commands:
sudo ./adb push /directory_you_placed_asroot2/asroot2 /data/local/
sudo ./adb shell chmod 0755 /data/local/asroot2
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4755 su
If all goes well you should be presented with a new prompt. This is the linux terminal built into Android. This will allow us to execute all the commands we need to execute because the asroot2 script gave us root access.
In Windows it is a little more difficult. You have to first install the driver for the phone. When Windows asks you for the drivers direct Windows to the directory you extracted the SDK into. You should see a folder called usb_driver. If you are running the 32 bit version of Windows select the x86 folder. If you are using a 64 bit version then select the x64 folder. Then select the android_usb.inf file. This should install the drivers.
If running XP or lower you will need to go to the start menu and click run, then you enter cmd and press enter. If Vista or higher you will press the start button and type cmd and press enter. When you are at the command prompt you cd to the directory you extracted the sdk into. Then cd into the tools directory. Then execute the following commands:
adb push /directory_you_placed_asroot2/asroot2 /data/local/
adb shell
chmod 0755 /data/local/asroot2
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4755 su
Now your phone is officially rooted! We arent done yet though. Now you need to flash the recovery image. If you are still in adb shell type in exit until you are out. You should be in the directory where you extracted the recovery image. If not go there. Type in the following:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
Once that is done, type in adb shell (or sudo ./adb shell in ubuntu). If your command prompt is a dollar sign then type in su and press enter. If it is a pound sign you are good. Then type in the following:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
Once that is finished you are done. To reboot into recovery type in adb shell reboot recovery. You should reboot into recovery mode. Right now there is not a lot you can do but once we have some devs who make some roms then we will be well on our way to an even more awesome phone. Any questions please ask away. Also, I am sorry if this tutorial is hard to understand or badly laid out. My daughter is crawling all over me so it's hard to type or think. Good luck all and thanks to everyone who rooted this phone and made the recovery and did such a great job!

chuckhriczko said:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
Click to expand...
Click to collapse
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?

You beat me to it!!!! I was planning on laying out the steps to make sure I had my head on straight.
To continue with your guide: (The following are questions, not procedures)
1. We run a Nandroid back up to lock in our stock ROM so if we ever do something stupid, aka brick the phone, we can push this back on?
2. What comes on the SD card? Is it needing to be backed up when I go to a 16GB class 6 card?
3. Insert the new SDcard and use the ext2/swap/fat32 script
4. convert ext2 to ext3, (now ready for apps2SD?)
Anything else you can add would be nice.
Again thanks for the steps! They are clear for me.

rockcrawler said:
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?
Click to expand...
Click to collapse
Sounds like you need to add the directory where you have adb to be added to he path. is your adb in the same dir as the image?

rockcrawler said:
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?
Click to expand...
Click to collapse
You may currently be in adb shell already. If you are showing the pound sign this is likely. The command is supposed to be run outside of adb shell. Try the command below:
flash_image recovery recovery-RA-heroc-v1.2.3.img

Treefallingquietly said:
Sounds like you need to add the directory where you have adb to be added to he path. is your adb in the same dir as the image?
Click to expand...
Click to collapse
I apologize, but that went right over my head.
I have used this command to copy the image to the sd card.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
I got this output:
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1640 KB/s (3352576 bytes in 1.996s)
I then do the following with the noted result:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell
$ su
su
# adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb: not found
Any help as to where I making my mistake would be greatly appreciated.

Treefallingquietly said:
You beat me to it!!!! I was planning on laying out the steps to make sure I had my head on straight.
To continue with your guide: (The following are questions, not procedures)
1. We run a Nandroid back up to lock in our stock ROM so if we ever do something stupid, aka brick the phone, we can push this back on?
Click to expand...
Click to collapse
Yes. A nandroid backup completely backs up every piece of information on your phone. It is a complete image of your phone and if it needs to be restored for whatever reason you just load up recovery and can restore it the way it was before.
Treefallingquietly said:
2. What comes on the SD card? Is it needing to be backed up when I go to a 16GB class 6 card?
Click to expand...
Click to collapse
What do you mean exactly? The only thing that gets copied to an sd card is the nandroid backup so yes, when switching to an sd card just do another backup. Or you can also copy the nandroid folder from your existing sd card to your new one.
Treefallingquietly said:
3. Insert the new SDcard and use the ext2/swap/fat32 script
4. convert ext2 to ext3, (now ready for apps2SD?)
Click to expand...
Click to collapse
Yes and no. Just run the ext2/swap/fat32 script and it should be ready for apps2sd. You can convert to ext3 if you want. Generally on normal hard drives ext3 is faster, however there has been some controversy with that on android phones. As for converting to apps2sd, right now the best way is probably the manual method which I can write up a tutorial on as well. The dream forum has some good tutorials on it as they were the first to do it. I actually need to go back and re read some of those because it's been so long since I did it. I tried the apps2sd apk but that didnt seem to work for me.

rockcrawler said:
I apologize, but that went right over my head.
I have used this command to copy the image to the sd card.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
I got this output:
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1640 KB/s (3352576 bytes in 1.996s)
I then do the following with the noted result:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell
$ su
su
# adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
adb: not found
Any help as to where I making my mistake would be greatly appreciated.
Click to expand...
Click to collapse
Yeah. The problem is that you are trying to adb shell twice. After you adb push then just run the command adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img. That should work.

chuckhriczko said:
You may currently be in adb shell already. If you are showing the pound sign this is likely. The command is supposed to be run outside of adb shell. Try the command below:
flash_image recovery recovery-RA-heroc-v1.2.3.img
Click to expand...
Click to collapse
Now I get the Following:
Code:
# flash_image recovery recovery-RA-heroc-v1.2.3.img
flash_image recovery recovery-RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
#
And this outside adb shell, in the same directory where I did the push:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell flash_image recovery recovery-
RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
Ideas?

rockcrawler said:
Is this the right command, every time I try I get : "adb: not found"
The transfer to the sd card seemed to go fine, and I am @ root (#).
Am I missing something?
Click to expand...
Click to collapse
yes he left out the /sdcard/in the path and if you are in teh shell you don't need the adb portion of the command.

rockcrawler said:
Now I get the Following:
Code:
# flash_image recovery recovery-RA-heroc-v1.2.3.img
flash_image recovery recovery-RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
#
And this outside adb shell, in the same directory where I did the push:
Code:
C:\androidSDK\android-sdk-windows\tools>adb shell flash_image recovery recovery-
RA-heroc-v1.2.3.img
error opening recovery-RA-heroc-v1.2.3.img: No such file or directory
Ideas?
Click to expand...
Click to collapse
Ok. Most likely you dont have the recovery image in the directory. Try this. Copy the recovery image to the tools directory of the sdk. Then, outside of adb shell, (making sure you are in the tools directory of the sdk) execute the following command:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
This should work as long as you have the recovery image in the correct directory.

can i use the rom from modaco? or at least the themes?

magicalan said:
can i use the rom from modaco? or at least the themes?
Click to expand...
Click to collapse
No way! This rom is a GSM rom and if it works at all and does not brick your phone then it wont have the right software to make your phone work. A dev has to create a rom specially for the CDMA Hero that has the right drivers.

chuckhriczko said:
Ok. Most likely you dont have the recovery image in the directory. Try this. Copy the recovery image to the tools directory of the sdk. Then, outside of adb shell, (making sure you are in the tools directory of the sdk) execute the following command:
adb shell flash_image recovery recovery-RA-heroc-v1.2.3.img
This should work as long as you have the recovery image in the correct directory.
Click to expand...
Click to collapse
I am feeling really special, not being able to make this work, but that is the folder that it has been in all this time. I have even downloaded and pushed it several times. Proof:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I am not sure where I am messing up.
Thanks for all the help and hard work on this BTW!

rockcrawler said:
I am feeling really special, not being able to make this work, but that is the folder that it has been in all this time. I have even downloaded and pushed it several times. Proof:
So I am not sure where I am messing up.
Thanks for all the help and hard work on this BTW!
Click to expand...
Click to collapse
Meh. Not hard work. Just experience. The hard work is what the rom devs do. And it is difficult at first but once you get it trust me, you get it.Okay let's try this. Go into the command prompt (not adb shell) into the folder where adb and the recovery image is. Try to execute the following command and see if it works.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
This will put the recovery image on the sdcard. If this works then we will continue.

chuckhriczko said:
Meh. Not hard work. Just experience. The hard work is what the rom devs do. And it is difficult at first but once you get it trust me, you get it.Okay let's try this. Go into the command prompt (not adb shell) into the folder where adb and the recovery image is. Try to execute the following command and see if it works.
Code:
adb push recovery-RA-heroc-v1.2.3.img /sdcard/
This will put the recovery image on the sdcard. If this works then we will continue.
Click to expand...
Click to collapse
Done.
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1747 KB/s (3352576 bytes in 1.873s)
C:\androidSDK\android-sdk-windows\tools>

rockcrawler said:
Done.
Code:
C:\androidSDK\android-sdk-windows\tools>adb push recovery-RA-heroc-v1.2.3.img /s
dcard/
1747 KB/s (3352576 bytes in 1.873s)
C:\androidSDK\android-sdk-windows\tools>
Click to expand...
Click to collapse
Sweetness. Ok. Now type in the following:
Code:
$ adb shell
$ cd /sdcard/
$ su
# flash_image recovery recovery-RA-heroc-v1.2.3.img
That should work. Note, don't type in the $ or the #. Those are just there to show what the command prompt should look like.

THANK YOU!!!!!
chuckhriczko said:
Sweetness. Ok. Now type in the following:
Code:
$ adb shell
$ cd /sdcard/
$ su
# flash_image recovery recovery-RA-heroc-v1.2.3.img
That should work. Note, don't type in the $ or the #. Those are just there to show what the command prompt should look like.
Click to expand...
Click to collapse
Worked Like a charm, THANK YOU!!! Just booted to the recovery image and all is well.
p.s. Might want to edit the origional instructions, one your daughter goes to bed, to include the cd to the sd card, that is where my problem was.

rockcrawler said:
Worked Like a charm, THANK YOU!!! Just booted to the recovery image and all is well.
p.s. Might want to edit the origional instructions, one your daughter goes to bed, to include the cd to the sd card, that is where my problem was.
Click to expand...
Click to collapse
If I am able to I will. I understand that the instructions were a little hard to follow for beginners which was what I wanted to avoid. Glad you got it working though. Welcome to the world of Android hacking and please enjoy your stay

I'm getting suck trying to push the recovery img out to my sdcard
Code:
C:\AndroidSDK\tools>adb push recovery-RA-heroc-v1.2.3.img /sdcard/
cannot stat 'recovery-RA-heroc-v1.2.3.img': No such file or directory
I believe I have root access:
Code:
C:\AndroidSDK\tools>adb shell
$ su
su
#

[How to] [Linux] Root Hboot 2.02

For anyone having issues with running this in linux.
I used zikronix guide and modified it for use in a linux support thread. The original thread can be found here:
http://forum.xda-developers.com/showthread.php?t=829045
This is my setup:
-I made sure to show my .bashrc profile and path to my tools folder if you needed help getting that setup as well... If not please ignore.
Code:
[email protected]:~$ cat .bashrc | grep adb
alias start-adb='sudo /usr/local/android-sdk/tools/./adb start-server'
alias kill-adb='sudo /usr/local/android-sdk/tools/./adb kill-server'
[email protected]:~$ cat .bashrc | grep android-sdk
export PATH="/usr/local/android-sdk/tools/:${PATH}"
[email protected]:~$ $PATH
bash: /usr/local/android-sdk/tools/:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:
Download: http://www.wackynoodle.com/hboot202-s_off-V6.2.zip
Download (Mirror): http://sdx-downloads.com/EVO/devs/jerdog/fixes/hboot202-s_off-V6.2.zip
Now This might make things easier.
-I have this so that you are in the same enviroment that i was in so that the paths will be the same.
Code:
wget http://www.wackynoodle.com/hboot202-s_off-V6.2.zip
mkdir Evo-root
mv hboot202-s_off-V6.2.zip
cd Evo-root
unzip hboot202-s_off-V6.2.zip
- This step I just made sure that adb devices showed my device. If not get it working.
- Once adb devices showed my device properly, I simply ran the following commands.
Code:
adb push root/unrevoked-forever.zip /sdcard/
adb push root/mtd-eng.img /sdcard/
adb push pc36img/PC36IMG-ENG.zip /sdcard/PC36IMG.zip
adb push root/flash_image /data/local/
adb push root/rageagainstthecage /data/local/tmp
adb push root/amon_ra.img /sdcard/
- Then this is just changing permissions. Pretty straight forward.
Code:
adb shell
chmod 0755 /data/local/tmp/rageagainstthecage
chmod 0755 /data/local/flash_image
- Running the script. Should kick you out of adb... If not after 5 min kill the adb server and restart.
Code:
adb shell
./data/local/tmp/rageagainstthecage
- Now you should see a "#", if you do proceed. If not then run the script above again till it works.
Code:
adb shell
- If you saw that "#" run this. This can only be ran as root "#" means root.
Code:
./data/local/flash_image misc /sdcard/mtd-eng.img
Now you are going to want to reboot into the bootloader. Make sure once you do that you selet bootloader and let the PC36IMG.zip load.
Code:
reboot bootloader
After that is done reboot into the new rooted rom. Then make sure adb works again. Then run the following commands. Make sure you terminal is in the same directory this entire time there is no reason to leave the direcory we went into earlier "cd Evo-root" You directory should always be Evo-root. Thanks. The part that I found out was the second command where the entire recovery/ needed the permissions changed to be executable. As you saw in my post on that forum board.
- This will remove the PC36IMG.zip to a different name so that the bootloader won't get confused again. Then the second commands makes the directory executable recursivly. Then the third will reboot you into recovery.
Code:
adb shell mv /sdcard/PC36IMG.zip /sdcard/PC36IMG-ENG.zip
chmod -R +x recovery/
adb reboot recovery
- Now this is going to be done at the recovery screen. As long as you followed the steps above it will work fine. Should only take you about 20 mins to root this phone. Though it took me about 2 hours since no one else has been rooting using linux. I am thinking about writing a script that will root everything and alls you have to do is follow a terminal guide.... But ill see.
- Just run these commands that will allow you to flash the unrevoked-forever.zip. Once you follow the onscreen instructions of the unrevoked-forever.zip you will be able to reboot into the recovery and see the S-Off. Once that is done reboot into the rom, now we need to flash a custom recovery!
Code:
adb push recovery /
adb shell busybox --install /sbin
adb shell nohup /sbin/recovery &
- Again make sure your terminal was never closed and in the same folder. Then simply run these commands to flash the Amon_ra recovery. Since it has wimax capabilities I prefer it.
Code:
adb push root/flash_image /data/local/
adb shell
chmod 0755 /data/local/flash_image
./data/local/flash_image recovery /sdcard/amon_ra.img
reboot recovery
Now you should see the custom recovery and you should be able to flash any rom you desire!

reserved for later use

i see that they are same commands as the pc.., so would this also work with PC?

nickespi said:
i see that they are same commands as the pc.., so would this also work with PC?
Click to expand...
Click to collapse
I am guessing your talking about windows? Sure make sure adb is in your path. Though there are steps in here that are only for linux.

95% success
Well I want to thank you for this thread
It has worked for me I have root I have NAND unlocked
I can flash ROMs
The only issue I have is my radio/baseband and PRI version have been lowered
I have not been able to get thise back where they whould with either update or by using teh wimax.ADDRESS.tree.xml fix (there is no file with that)
If you have any ideas how to fix this would be much appreciated
I am unable to get higher tahn baseband 1.36.00.04.02 in ant rom
when I got teh phone it was 2.15.00.xx.xx
any help would be appreciated

100% Success
THANK YOU
My Evo
Hardware 004
Build 3.30
Hboot 2.02
Baseband 2.15.xx.xx
is now sucessfully rooted.
I did have some problems after being able to flash ROMs of not haveing PRI and Baseband updated.
On thread #787756 there are downloads that can be flashed to fix this problem if anyone else is in that boat.
zikronix sent me there for the fix...I believe he is adding it to the main thread but if it isn't there yet I wanted to add it now for anyone in my boat.
Again this method works and there is success.
Happy rooting

Hey thanx for this Linux guide. Does this steps work with the update 12.25.10 on the windows thread?
Will you update this guide?

[Huawei IDEOS U8150] How to gain root access

I hold no responsibility to how you use or not use this info and if you brick phone - you do this at your own risk
There is a couple away you can go about gaining root access with this phone I have tested all 3 ways but only had success with 2 of them.
a) You can download 'z4root' from the Android Market (If is still available) or search XDA forums for it.
b) Search the XDA forums for 'SuperOneClick' which requires mono to work on Linux. I have read people that have had success with 'SuperOneClick' but that was not the case for me.
c) My preferred method:
Prerequisite:
knowledge of Linux and Terminal
knowledge of ADB (guide available in forums)
I did all this using Debian (testing) 64bit, Android SDK.
Creating correct permissions to access the phone via USB:
i) create
Code:
/etc/udev/rules.d/51-android.rules
ii) in the file put
Code:
SUBSYSTEM=="usb", ATTR{idVendor}=="12d1", MODE="0666"
iii) then
Code:
chmod a+r /etc/udev/rules.d/51-android.rules
iv) restart udev or reboot
Downloading and/or Installing required software:
1) Downloading and installing the android-sdk from: developer.android.com/sdk/index.html
2) Downloading and extracting 'SuperOneClick' (you will only need these 5 files: rageagainstthecage, sqlite3, su, busybox and superuser.apk)
3) Copy rageagainstthecage, sqlite3, su, busybox and superuser.apk into the platform-tools directory of android-sdk. Put phone in debug mode.
4) From a terminal (command line) change to the android/platform-tools directory and carefully do these steps.
Check to see if adb can see your phone properly:
Code:
./adb devices
You should see the serial number of you device, if you see bunch of '?' you have done something wrong.
Now for the fun part rooting the phone: <= no phun intended hehe
Code:
./adb push rageagainstthecage /data/local/tmp/rageagainstthecage
Code:
./adb shell
Code:
cd /data/local/tmp
Code:
chmod 0755 rageagainstthecage
Code:
./rageagainstthecage
5) Now wait until you get kicked out from adb before you do the following:
Code:
./adb shell
If everything worked now you should see a "#" instead of the "$" you saw previously in the adb shell which means you shouldn't get "permission denied" in the following steps:
Code:
mount -o rw,remount /dev/block/mdtblock4 /system
Code:
exit
Code:
./adb push su /system/bin/su
Code:
./adb push busybox /system/bin/busybox
Code:
./adb push sqlite3 /system/bin/sqlite3
Code:
./adb push Superuser.apk /system/app/Superuser.apk
Code:
./adb shell
Code:
cd /system/bin
Code:
chmod 4755 su
Code:
chmod 4755 busybox
Code:
chmod 4755 sqlite3
Code:
./adb reboot
Now you should be able to use apps like 'Cache Cleaner NG', 'Root Explorer', 'SetCPU' etc that require root access to work correctly.
Enjoy

Guide reflash FW for those who did some damage:
* Download from here that you want to install the FW
* Copy the folder in the microSD DLOAD (with the file inside UPADATE.APP)
* From phone off, Volume + Hold down RED BUTTON UP and power button.
* start the firmware upgrade, take a few minutes and then restart the phone . is a bit slow, do not be afraid, let him work and then back on (like the first time)
Help to get into recovery mode:
* down the 'volume up 'and 'green button'and then switch the device
Guide to bootloader mode:
* switch off, press and hold power button + volume down + red key

Overclock
Can this fone be oveclocked

SethIsHere said:
Can this fone be oveclocked
Click to expand...
Click to collapse
yes it can be OCed, I recommend using setCPU from the market

SethIsHere said:
Can this fone be oveclocked
Click to expand...
Click to collapse
Yes it can, to a Maximum of 600mhz (0.6 ghz) on the stock kernel
setCPU is no longer available on the market for free afaik.
Also can someone better translate the instructions to get into recovery mode? i can barely make sense of the above instructions ^^^

.produkt-R said:
Also can someone better translate the instructions to get into recovery mode? i can barely make sense of the above instructions ^^^
Click to expand...
Click to collapse
does this help:
http://forum.xda-developers.com/showpost.php?p=10371747&postcount=5

quail said:
does this help:
http://forum.xda-developers.com/showpost.php?p=10371747&postcount=5
Click to expand...
Click to collapse
Helped, Thanks.
Although after reading the entire page, i wonder if i should have a Recovery ROM installed. But i wonder if the phone will be left in it's current working state after installing it ?

i used z4root, worked fine for me

quail said:
Code:
chmod 4755 su
Code:
chmod 4755 busybox
Code:
chmod 4755 sqlite3
Click to expand...
Click to collapse
I think only "su" should be 4755 (setuid root), busybox and sqlite3 should just be 0755? Thanks for the instructions.

pb05life said:
i used z4root, worked fine for me
Click to expand...
Click to collapse
Ok I figured it ill shut up you have to use crappy dos command prompt and type everything in manually install proggies lol Google must die!

quail said:
Creating correct permissions to access the phone via USB:
i) create
Code:
/etc/udev/rules.d/51-android.rules
ii) in the file put
Code:
SUBSYSTEM=="usb", ATTR{idVendor}=="12d1", MODE="0666"
iii) then
Code:
chmod a+r /etc/udev/rules.d/51-android.rules
iv) restart udev or reboot
Click to expand...
Click to collapse
Anyone know this part for windows XP?Not linux?
I got to rageagainstthecage and it says permission denied.

fvckyougooglescammer said:
So would you tell us, exactly how you did it?
Without using the market place?
Because I have tried 100 things downloaded all that junk wasted 5 hours.
And I do not know how to run the z4root on my phone.
I do not want to install another ROM.
I do not know why you can not run z4root and a file manager from the SD card I have tried methods with the SDK they are total rubbish.
Once again *without* using the market place.
Thanks
Click to expand...
Click to collapse
Download it mediafire.com/u8150
Sent from my Ideos using XDA App

could you explain why you prefer this way instead using z4root?

nitro-ale said:
could you explain why you prefer this way instead using z4root?
Click to expand...
Click to collapse
I have Z4root on the phone and its supposedly rooted.
Yet, I can install apps from PC onto phone, but can not uninstall them.
Adb always gives me failure.
And if I try from shell it always says permission denied.

tilal6991 said:
Download it
Sent from my Ideos using XDA App
Click to expand...
Click to collapse
Hi thanks downloaded it fine its on the phone but this doesn't tell me how to remove apps.
I have been able to install but not remove adb always says failure.

Thanks man,
Just worked perfectly on my IDEOS brought from 2degrees in NZ.
The copy of SuperOneClick that I downloaded contained a file called su-v2 instead of su. In order to get the hack to work I had to rename su-v2 to su before running ./rageagainstthecage . Pretty obvious, but it might help someone out.
Thanks

fvckyougooglescammer said:
I have Z4root on the phone and its supposedly rooted.
Yet, I can install apps from PC onto phone, but can not uninstall them.
Adb always gives me failure.
And if I try from shell it always says permission denied.
Click to expand...
Click to collapse
I followed your instructions and installed SetCPU to test my phone was rooted. It worked great! Thanks.
I still have a problem. When I try adb root it still says "adbd cannot run as root in production builds". I'm trying this to be able to control my phone with pc mouse/keyboard with androidscreencast.
Any suggestions will be much appreciated.
Answering to myself: I updated my phone with FUSIONideos 1.5 and now adb runs as root without problems.

Z4root
http://forum.xda-developers.com/showthread.php?t=833953
Worked for me

Does it removes simlock I have Huawei U8150 IDEOS Android phone with career lock ( Simlock ), so will this remove it

can there be a batch file / command / app for all this, too techy out there
also how to setup the environment to run these commands, i m windows user can i do it ?

[Q] i have an error while i'm trying to update firmware

when i'm trying to update firmware im geting this:
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb shell
[email protected]:/ $ mv /data/local/tmp /data/local/tmp.bak
mv /data/local/tmp /data/local/tmp.bak
failed on '/data/local/tmp' - Permission denied
255|[email protected]:/ $
and because of that i can't go to the next step
what's wrong with it??

bobnur said:
when i'm trying to update firmware im geting this:
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb shell
[email protected]:/ $ mv /data/local/tmp /data/local/tmp.bak
mv /data/local/tmp /data/local/tmp.bak
failed on '/data/local/tmp' - [COLOR=Red]Permission denied[/COLOR]
255|[email protected]:/ $
and because of that i can't go to the next step
what's wrong with it??
Click to expand...
Click to collapse
adb shell
su
then type your commands
Maybe give link to commands or post commands to be used.

tobdaryl said:
adb shell
su
then type your commands
Maybe give link to commands or post commands to be used.
Click to expand...
Click to collapse
my tab is not rooted...
su just works with rooted tabs...

bobnur said:
my tab is not rooted...
su just works with rooted tabs...
Click to expand...
Click to collapse
Updating can usually be done by unzipping update once and placing the new zip on sdcard or external sdcard, reboot and accept request to update - shows in notification area
Have you tried that method?
also
fastboot -i 0x0B05 flash system update.blob
fastboot -i 0x0B05 reboot

tobdaryl said:
Updating can usually be done by unzipping update once and placing the new zip on sdcard or external sdcard, reboot and accept request to update - shows in notification area
Have you tried that method?
also
fastboot -i 0x0B05 flash system update.blob
fastboot -i 0x0B05 reboot
Click to expand...
Click to collapse
Somehow it doesn't work...
Is it some other ways??

bobnur said:
Somehow it doesn't work...
Is it some other ways??
Click to expand...
Click to collapse
I don't know of others without being rooted or flashing a recovery ( twrp ).
Maybe someone else has a better idea!

tobdaryl said:
I don't know of others without being rooted or flashing a recovery ( twrp ).
Maybe someone else has a better idea!
Click to expand...
Click to collapse
My knowledge of linux/android is limited, but I agree with post #2. You need to have root (su) permissions in order to move that file, because I'm assuming its on the root of your tablet's internal memory. So, you could either use the "su" command, type in the appropriate password and THEN move the files, or use the (safer) sudo command, which will allow you to perform just one action. If you login as superuser (using su w/ password), you have unlimited access and could potentially really break stuff if you're not careful.
Another idea is that since you're moving it from the /data partition, and that partition is currently in use, it would deny you permission. Theoretically speaking, you could unmount the partition through CWM and then just access your tablet in fastboot mode (don't boot into Android, as it needs that /data partition).
Just my two cents, and I'm not responsible if your tablet breaks, or if the zombies eat it. You know, whichever comes first

New root metod for NEW version : Sprint US 7.7.1Q-6_SPR-125_ASA-14

This is a work metod for root your not unlocked phone !
I find a solution after update to last new version
Download this : http://forum.xda-developers.com/showthread.php?t=2143437
After download and share fail with samba windows or mac sharing, you need to mount from file manage > remote storage
After fix permission go to adb folder and type :
"adb shell"
"cd /mnt/rfs0"
"./su"
"cd /"
"ln -s /mnt /storage"
Next step go to console and type :
adb kill-server
adb shell /storage/rfs0/pwn
Next : Install apk package from phone , Reboot Phone and now your phone is rooted!
Update from Play Market SuperSu and go.
Best regards,
m.

micron said:
This is a work metod for root your not unlocked phone !
I find a solution after update to last new version
Download this : http://forum.xda-developers.com/showthread.php?t=2143437
After download and share fail with samba windows or mac sharing, you need to mount from file manage > remote storage
After fix permission go to adb folder and type :
"adb shell"
"cd /mnt/rfs0"
"./su"
"cd /"
"ln -s /mnt /storage"
Next step go to console and type :
adb kill-server
adb shell /storage/rfs0/pwn
Next : Install apk package from phone , Reboot Phone and now your phone is rooted!
Update from Play Market SuperSu and go.
Best regards,
m.
Click to expand...
Click to collapse
lol if i saw this earlier i might not have unlocked my boot loader today. =) hope someone can try this

I gave this a try earlier today. I scoured through the forum to find that the new Ubuntu doesn't install ADB drivers by default, so you need to do this manually.
Anyway, I attempted to do it and got all the way to ./su. It then prompted me with the message "./su cannot execute - Permission denied". Obviously from there I can't link /mnt to /storage and I can't run pwn because it looks for the /storage folder.
If you have any suggestions how to get ./su running, let me know.

rykin said:
I gave this a try earlier today. I scoured through the forum to find that the new Ubuntu doesn't install ADB drivers by default, so you need to do this manually.
Anyway, I attempted to do it and got all the way to ./su. It then prompted me with the message "./su cannot execute - Permission denied". Obviously from there I can't link /mnt to /storage and I can't run pwn because it looks for the /storage folder.
If you have any suggestions how to get ./su running, let me know.
Click to expand...
Click to collapse
This method works but not all intructions are here.
First, you need to change permissions of su:
chown root:root su
chmod 6755 su
then run adb shell and remount / filesystem ro rw:
mount -o rw,remount /
now you can create symbolic link and run the exploit.
You can also perform rooting manually (without creating symlink and running pwn):
remount /system partition to rw: mount -o rw,remount /system
and copy su to /system/xbin, make sure that it has correct permissions (rwsr-sr-x) and that's it.
Now you can remount partitions back to ro.
Install supersu or superuser (whatever makes you happy, just check if it works correctly, superuser didn't work for me, it didn't prompt about root permission for any app, it just gave it, no matter how configured it was), Then install busybox, if you need one.
And you're done.

YES! Glad I waited!
Sent from my XT897 using xda premium

ujoty said:
This method works but not all intructions are here.
First, you need to change permissions of su:
chown root:root su
chmod 6755 su
then run adb shell and remount / filesystem ro rw:
mount -o rw,remount /
now you can create symbolic link and run the exploit.
You can also perform rooting manually (without creating symlink and running pwn):
remount /system partition to rw: mount -o rw,remount /system
and copy su to /system/xbin, make sure that it has correct permissions (rwsr-sr-x) and that's it.
Now you can remount partitions back to ro.
Install supersu or superuser (whatever makes you happy, just check if it works correctly, superuser didn't work for me, it didn't prompt about root permission for any app, it just gave it, no matter how configured it was), Then install busybox, if you need one.
And you're done.
Click to expand...
Click to collapse
Thank you. I just tried this and it worked. Confirmed with Root Checker. :>

micron said:
This is a work metod for root your not unlocked phone !
I find a solution after update to last new version
Download this : http://forum.xda-developers.com/showthread.php?t=2143437
After download and share fail with samba windows or mac sharing, you need to mount from file manage > remote storage
After fix permission go to adb folder and type :
"adb shell"
"cd /mnt/rfs0"
"./su"
"cd /"
"ln -s /mnt /storage"
Next step go to console and type :
adb kill-server
adb shell /storage/rfs0/pwn
Next : Install apk package from phone , Reboot Phone and now your phone is rooted!
Update from Play Market SuperSu and go.
Best regards,
m.
Click to expand...
Click to collapse
Thanks, I think this is exactly what I am looking for per this thread. Unfortunately, I don't quite have the knowledge (yet) to completely understand what you mean. I've rooted several phones, but never had to use ADB before so am unfamiliar with it. Also, what do you mean by this: "After download and share fail with samba windows..."?

cscotti said:
Thanks, I think this is exactly what I am looking for per this thread. Unfortunately, I don't quite have the knowledge (yet) to completely understand what you mean. I've rooted several phones, but never had to use ADB before so am unfamiliar with it. Also, what do you mean by this: "After download and share fail with samba windows..."?
Click to expand...
Click to collapse
By reading this link you will know hot to setup samba installation on a UBUNTU live cd. After doing that on your phone you should go to your FILE MANAGER --> remote storage and add the samba share to your phone. On the UBUNTU live cd, on your samba folder you should do this:
Code:
cd /path/to/share
wget http://vulnfactory.org/public/motoshare.tgz
tar xvf motoshare.tgz
sudo chown root:root pwn
sudo chmod 6755 pwn
After that you should put your phone in USB debugging mode and connect it to your PC. On your PC your should download the platform-tools folder of the Android SDK. The platform-tools folder contains adb (MAC) adb.exe (Windows) file. After you have adb, on your WIndows/MAC PC you should type:
Code:
./adb shell
cd /mnt/rfs0
./su
mount -o rw,remount /
cd /
ln -s /mnt /storage
exit (to exit the ADB shell)
adb kill-server
adb shell /storage/rfs0/pwn
Next you should copy eu.chainfire.supersu.apk on your phone storage and install it with file manager.
Reboot your device! Congratulations, your phone is rooted

desyncron said:
By reading this link you will know hot to setup samba installation on a UBUNTU live cd. After doing that on your phone you should go to your FILE MANAGER --> remote storage and add the samba share to your phone. On the UBUNTU live cd, on your samba folder you should do this:
Code:
cd /path/to/share
wget http://vulnfactory.org/public/motoshare.tgz
tar xvf motoshare.tgz
sudo chown root:root pwn
sudo chmod 6755 pwn
After that you should put your phone in USB debugging mode and connect it to your PC. On your PC your should download the platform-tools folder of the Android SDK. The platform-tools folder contains adb (MAC) adb.exe (Windows) file. After you have adb, on your WIndows/MAC PC you should type:
Code:
./adb shell
cd /mnt/rfs0
./su
mount -o rw,remount /
cd /
ln -s /mnt /storage
exit (to exit the ADB shell)
adb kill-server
adb shell /storage/rfs0/pwn
Next you should copy eu.chainfire.supersu.apk on your phone storage and install it with file manager.
Reboot your device! Congratulations, your phone is rooted
Click to expand...
Click to collapse
Wow, thanks for this. I was considering trying to condense down the instructions myself before I did this, but you beat me to it, and did a better job than I would have, considering I'm a novice at this stuff.
So your method uses a linux boot for samba, but then the rest is done on windows. Question: could you do the adb stuff on Linux? Seemed like some of the posts in the atrix threads were doing it that way, and I was just curious. I have mint 14-64 bit on a couple of my machines, as well windows, and was thinking this would be an opportunity to learn it a little better.
Sent from my XT897 using xda premium

Hello,
and what if I have unlocked bootloader? Is there any other way to root this phone?

desyncron said:
By reading this link you will know hot to setup samba installation on a UBUNTU live cd. After doing that on your phone you should go to your FILE MANAGER --> remote storage and add the samba share to your phone. On the UBUNTU live cd, on your samba folder you should do this:
Code:
cd /path/to/share
wget http://vulnfactory.org/public/motoshare.tgz
tar xvf motoshare.tgz
sudo chown root:root pwn
sudo chmod 6755 pwn
After that you should put your phone in USB debugging mode and connect it to your PC. On your PC your should download the platform-tools folder of the Android SDK. The platform-tools folder contains adb (MAC) adb.exe (Windows) file. After you have adb, on your WIndows/MAC PC you should type:
Code:
./adb shell
cd /mnt/rfs0
./su
mount -o rw,remount /
cd /
ln -s /mnt /storage
exit (to exit the ADB shell)
adb kill-server
adb shell /storage/rfs0/pwn
Next you should copy eu.chainfire.supersu.apk on your phone storage and install it with file manager.
Reboot your device! Congratulations, your phone is rooted
Click to expand...
Click to collapse
well that sounds a bit intimidating but thanks for spelling it out. I'll try to work up the nerve and make some time to give this a try.
Just curious, but why can't this be compressed into a one click batch file like before?

vangelm said:
Hello,
and what if I have unlocked bootloader? Is there any other way to root this phone?
Click to expand...
Click to collapse
If your bootloader is unlocked, you can easily root. You don't need any exploits etc.
Install TWRP, it will automatically root the device. Or, install CWM and then install SuperSU afterwards, which will root the device.

arrrghhh said:
If your bootloader is unlocked, you can easily root. You don't need any exploits etc.
Install TWRP, it will automatically root the device. Or, install CWM and then install SuperSU afterwards, which will root the device.
Click to expand...
Click to collapse
It works, thank you, have a nice day.

vangelm said:
It works, thank you, have a nice day.
Click to expand...
Click to collapse
Can you share what you did? Instructions seem to say that I need to install GooManager? The summary of GooManager says I need root to use it. TIA.

micron said:
This is a work metod for root your not unlocked phone !
I find a solution after update to last new version
Download this : http://forum.xda-developers.com/showthread.php?t=2143437
After download and share fail with samba windows or mac sharing, you need to mount from file manage > remote storage
After fix permission go to adb folder and type :
"adb shell"
"cd /mnt/rfs0"
"./su"
"cd /"
"ln -s /mnt /storage"
Next step go to console and type :
adb kill-server
adb shell /storage/rfs0/pwn
Next : Install apk package from phone , Reboot Phone and now your phone is rooted!
Update from Play Market SuperSu and go.
Best regards,
m.
Click to expand...
Click to collapse
**** I wish I saw this before i went to Motorola for my warranty voiding unlock code
---------- Post added at 05:01 PM ---------- Previous post was at 04:50 PM ----------
arrrghhh said:
If your bootloader is unlocked, you can easily root. You don't need any exploits etc.
Install TWRP, it will automatically root the device. Or, install CWM and then install SuperSU afterwards, which will root the device.
Click to expand...
Click to collapse
I like TWRP but CWM in my opinion is better (more supported).

amateurhack said:
Question: could you do the adb stuff on Linux? Seemed like some of the posts in the atrix threads were doing it that way, and I was just curious. I have mint 14-64 bit on a couple of my machines, as well windows, and was thinking this would be an opportunity to learn it a little better.
Sent from my XT897 using xda premium
Click to expand...
Click to collapse
Yes. This can be done in Linux. I did it entirely with a LIVE USB. However, adb might not be installed by default (on mine it was not). To install it, do the following:
sudo add-apt-repository ppa:nilarimogard/webupd8
sudo apt-get update
sudo apt-get install android-tools-adb android-tools-fastboot
Click to expand...
Click to collapse
This will prevent you from running into errors when you start typing: adb shell

swintec said:
Can you share what you did? Instructions seem to say that I need to install GooManager? The summary of GooManager says I need root to use it. TIA.
Click to expand...
Click to collapse
Either use GooManager or the fastboot flash method. I think you do need to be rooted in order for GooManager to get the permissions it requires to flash recovery... So in that case, the only way initially to flash might be fastboot flash... Sorry.
alexwoellhaf said:
I like TWRP but CWM in my opinion is better (more supported).
Click to expand...
Click to collapse
Not even sure what this means. Any zip you can flash with CWM, you should be able to flash with TWRP. No?
They're both recoveries. One is touch-based, one isn't.

Having trouble with abd
Im running Ubuntu 12.04 full install (not live CD)
When I connect my phone, dmesg see the new device, and so does lsusb
dmesg
Code:
[ 290.617377] usb 2-1: USB disconnect, device number 2
[ 295.476023] usb 2-1: new high-speed USB device number 4 using ehci_hcd
[ 295.611624] scsi9 : usb-storage 2-1:1.0
[ 296.610626] scsi 9:0:0:0: Direct-Access motorola XT897 0001 PQ: 0 ANSI: 2
[ 296.611152] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 296.613548] sd 9:0:0:0: [sdc] Attached SCSI removable disk
lsusb:
Code:
Bus 002 Device 004: ID 22b8:2e36 Motorola PCS
However no matter what, when I run "adb devices", the phone does not show up.
51-android.rules
Code:
SUBSYSTEM=="usb", ATTRS{idVendor}=="22b8", MODE="0666"
This is what I get with adb
Code:
[email protected]:/tmp/share# adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
[email protected]:/tmp/share#
What else can I do???

desyncron said:
By reading this link you will know hot to setup samba installation on a UBUNTU live cd. After doing that on your phone you should go to your FILE MANAGER --> remote storage and add the samba share to your phone. On the UBUNTU live cd, on your samba folder you should do this:
Code:
cd /path/to/share
wget http://vulnfactory.org/public/motoshare.tgz
tar xvf motoshare.tgz
sudo chown root:root pwn
sudo chmod 6755 pwn
After that you should put your phone in USB debugging mode and connect it to your PC. On your PC your should download the platform-tools folder of the Android SDK. The platform-tools folder contains adb (MAC) adb.exe (Windows) file. After you have adb, on your WIndows/MAC PC you should type:
Code:
./adb shell
cd /mnt/rfs0
./su
mount -o rw,remount /
cd /
ln -s /mnt /storage
exit (to exit the ADB shell)
adb kill-server
adb shell /storage/rfs0/pwn
Next you should copy eu.chainfire.supersu.apk on your phone storage and install it with file manager.
Reboot your device! Congratulations, your phone is rooted
Click to expand...
Click to collapse
I am trying to run through these steps. For starters, when I enter the 'adp shell' I do not have a /mnt/rfs0 directory. The shared samba directory actually mounts at /storage/rfs0. No biggie. I go to that directory to run ./su. The su command runs, and I can see a pop up notification on my phone indicating the adb shell has been granted admin rights. The problem is that the ./su command never returns. As a matter of fact, if I just left it sit there, I get the admin rights pop up notification on my phone about once per minute so it seems like the su command is in some loop.
At this point I am stuck. I cant remount my file system as read/write without SU. I can run the ./su command in a different process, either in another adb shell or with the ./su& command but that does me no good as I cant execute any root commands in that same process.
Is there something that needs to change with the su command for the newer version my phone is running? I am running 9.8.2Q-122_XT897_FFW-5.
Thanks.

Use 'motochopper', search for it on xda then root is just one click away
Sent from my XT897 using xda app-developers app