Related
Right, had desire s from three, alpharevx'd it installed clockwork mod, flashed eng hboot. Tried to flash RUU 1.47 europe on it, and it started to work and go through process, updated radio fine, then came up with CID error. No option to do anything but exit. Now I have a desire s that will boot into Bootloader, which has now s-on'd itself and upgraded to 0.98.0002.
Only method of comms seems to be via fastboot.
Now i cant flash the h3g one cos its too low a bootloader version, and i cant upgrade to a newer version cos one don't exist. Can anyone come up with a solution please??
Cheers.
What does HBOOT screen say (in full)?
Are you still able to get into recovery? If yes, then have you tried loading a custom ROM onto the SD card and simply flashing that using the flash zip from sd card option of CWM (clock work mod)?
Unfortunately I am unable to get into recovery, only bootloader, nothing else works. Hboot is displaying a security error at the top highlighted in pink, followed by the version number as described
You should have stuck with the alpharev hboot, which does not allow itself to be overwritten by RUU installs.
Anyway, you need to:
- install hboot 0.980000 (so you can run alpharevx again and get S-OFF)
- run alpharevx and reinstall CWM at the end
- DO NOT install the eng hboot
- flash whatever rom whichever way you want. Your hboot is safe
Follow the instructions on:
http://forum.xda-developers.com/showthread.php?t=1187231
How can I run alpharevx when I can only boot into bootloader tho?
Try running it while in bootloader. Never tryed it that way, but I'm pretty sure it only needs the USB comms to be up, same as adb. Which they should be anyway in bootloader...
Have you tried to re-setup your phone by executing one of the RUU.exe?
k, as i expected, with no access to adb in bootloader mode, i am unable to do anything. Remember, i only have bootloader to work from. I don't eve3n have a recovery partition installed, it just comes back to bootloader whatever i choose, well, bootloader and fastboot anyway.
yup, tried running the ruu again but to no avail. Just get cid error. And i can't make a goldcard either cos i cant get the code. Might just send it back i think and act dumb :/
What about using the "normal" upadte procedure? Placing the PG88(whatever).zip on the root of the sdcard, and have the bootloader install it?
Of courtse with S-ON, it must be a signed version...
If all else fails s-off with xtc clip then flash custom rom
Sent from my HTC Desire S using XDA Premium App
Have you tried to use the original RUU for your phone/network? I'm not sure if it would take care of the CID error.
Any of these:
http://forum.xda-developers.com/showthread.php?t=1002506
Clivectmob said:
yup, tried running the ruu again but to no avail. Just get cid error. And i can't make a goldcard either cos i cant get the code. Might just send it back i think and act dumb :/
Click to expand...
Click to collapse
I do not expect this to work, but you said you are able to get into recovery, correct?
Well, I would try to enter fastboot mode and try to flash cwm via fastboot -> fastboot flash recovery XXXXXXXX.img
Correct (windows) drivers installed?
Edit:
lowveld said:
What about using the "normal" upadte procedure? Placing the PG88(whatever).zip on the root of the sdcard, and have the bootloader install it?
Of courtse with S-ON, it must be a signed version...
Click to expand...
Click to collapse
Good suggestion! Try this one first.
The problem with trying my original ruu for my network is that it contains the lower hboot version, when i flashed the generic ruu earlier, it actually started the update and flashed the radio part, then informed me the cid error, of course, by this time it had updated the hboot too. So now i have a desire s with an upgraded hboot so i can't flash a new one because of cid error and i can;t go back cos it reports a hboot version error. Where do i look on the system for the p88ing.zip now? can't remember now!
I haven't run a RUU in years, but I think that when you run it on a windows machine, it extracts a bunch of files to a directory. Cancel the process, find the directory, find th PG88... in the directory... You get the drift.
Clivectmob said:
The problem with trying my original ruu for my network is that it contains the lower hboot version, when i flashed the generic ruu earlier, it actually started the update and flashed the radio part, then informed me the cid error, of course, by this time it had updated the hboot too. So now i have a desire s with an upgraded hboot so i can't flash a new one because of cid error and i can;t go back cos it reports a hboot version error. Where do i look on the system for the p88ing.zip now? can't remember now!
Click to expand...
Click to collapse
It is not relevant which network you are using !!! Just try newest RUU to get control over your phone again in the first place!
Even if you don't get any network access after setup newest RUU you will definitely be abte to execute alpharevx again, flash cwm and flash any stuff you want to.
just tried flashing via fastboot, got a remote bootloader signature fail response (recovery)
Clivectmob said:
just tried flashing via fastboot, got a remote bootloader signature fail response (recovery)
Click to expand...
Click to collapse
I guess that means you tried flashing recovery via fastboot?
Then concentrate on our RUU-suggestions.
Yes, as i said, flashed via fastboot, and i already explained that i cant up/down grade via ruu method because of bootloader version. I can't think of a way out of this as it stands. The only thing that may work is doing it via the p88img method with my original 3uk rom, but i cant find it in my temp files, searched everywhere for it. I've seen it's location posted on here before now, and i've searched it to death and can't seem to find it now
I'm going to extract and upload your 3GUK-PG88*.img although I think you'll need an newer one. Just a few minutes of patience.
Hi, I think I may have completely screwed the phone up...
I've been on T-Mobile UK with this phone for quite a while now, 2.3.5 updates being available in Europe and on other UK providers for ages, and I know friends have recently received it on T-Mo UK too, but I couldn't get it for some reason. Investigating why with T-Mo customer service was futile so I decided to try and set about upgrading it myself.
I used superoneclick to get temporary root, flashed revolutionary recovery to get S-Off and got myself permanent root on 2.2 -- however something went wrong after this and I'm not quite sure what.
On trying the European RUU (2.10.401.8) it seemed as though it was successful, but going into HBoot, I could see it was no longer Revolutionary branded - instead it says:
Code:
*** LOCKED ***
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
eMMC-boot
Aug 22 2011, 15:22:13
Trying to flash another recovery tool doesn't work, trying to flash an earlier version of HBOOT doesn't work. Re-flashing the European unbranded RUU doesn't work because its now picking up that the CID isn't right, and in this environment (Hboot) my gold card doesn't seem to be working. The latest Desire S T-Mobile RUU I can find is version 1.30.110.2, and as its older I get the "Main version is older" error.
I tried extracting the rom.zip from the RUU .exe file, renaming it to PG88IMG.zip - but same error there - and trying to fool it by changing the version number in the manifest inside the archive just makes the sig check fail...
I'm totally outta ideas here, anyone got any more for me to try, or am I going to have to send this off to someone to fix?
Cheers!
edit: Issue solved, see page 2.
Also, in case this information helps - I do have a goldcard.img but it doesn't appear to work. My CID is T-Mob005
this guy seems to have been in the same boat as me but he did everything correctly - http://forum.xda-developers.com/showthread.php?t=1378921
if he still has his goldcard.img is there a chance it would work in my phone? I've PM'd him asking if he still has it
FrakEarth said:
Hi, I think I may have completely screwed the phone up...
I've been on T-Mobile UK with this phone for quite a while now, 2.3.5 updates being available in Europe and on other UK providers for ages, and I know friends have recently received it on T-Mo UK too, but I couldn't get it for some reason. Investigating why with T-Mo customer service was futile so I decided to try and set about upgrading it myself.
I used superoneclick to get temporary root, flashed revolutionary recovery to get S-Off and got myself permanent root on 2.2 -- however something went wrong after this and I'm not quite sure what.
On trying the European RUU (2.10.401.8) it seemed as though it was successful, but going into HBoot, I could see it was no longer Revolutionary branded - instead it says:
Code:
*** LOCKED ***
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
eMMC-boot
Aug 22 2011, 15:22:13
Trying to flash another recovery tool doesn't work, trying to flash an earlier version of HBOOT doesn't work. Re-flashing the European unbranded RUU doesn't work because its now picking up that the CID isn't right, and in this environment (Hboot) my gold card doesn't seem to be working. The latest Desire S T-Mobile RUU I can find is version 1.30.110.2, and as its older I get the "Main version is older" error.
I tried extracting the rom.zip from the RUU .exe file, renaming it to PG88IMG.zip - but same error there - and trying to fool it by changing the version number in the manifest inside the archive just makes the sig check fail...
I'm totally outta ideas here, anyone got any more for me to try, or am I going to have to send this off to someone to fix?
Cheers!
Click to expand...
Click to collapse
Relax, you have simply gotten the locked bootloader flashed to your phone. You can go to the HTCDEV.com site and unlock the bootloader and then you will be able to install a custom recovery and root the phone again.
tpbklake said:
Relax, you have simply gotten the locked bootloader flashed to your phone. You can go to the HTCDEV.com site and unlock the bootloader and then you will be able to install a custom recovery and root the phone again.
Click to expand...
Click to collapse
Thanks, that's one problem down!
At present I have this RUU Europe Rom that won't load, and the T-MO UK ones still won't install either. I've installed ClockwordMod Recovery 5.0.2.0, so that's good, but I take it I still need a goldcard if I'm going to install a ROM that doesn't match my phone's carrier ID?
Is the reason these older T-Mobile ROMS won't install because of S-ON and the higher radio version number?
edit: by the way, cyanogenmod and similar ROMs appear to install with no errors in clockworkmod recovery but I don't think they are. If I load one of the RUU exes it shows the same 2.10.4 version number with no changes evident whatsoever.
Don't do all so fast. READ FORUMS, READ COMMENTS. Revolutionary wont work with 2.00.0002 . It wont work
Sent from my HTC Desire S using xda premium
gefilus said:
Don't do all so fast. READ FORUMS, READ COMMENTS. Revolutionary wont work with 2.00.0002 . It wont work
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
I realise that now... I'm less concerned about rooting / getting full S-Off again and more concerned with just getting any working ROM at all onto the phone... as it seems the only ones that are probably going to work are T-Mobile ones, and the only available ROMs I can find are older - I may have to send this off to someone
So you cab get into fastboot?? If you can then use downgrading without HTC Dec unlocked bootloader, there is a post about this, try it should work and use misc_version to let phone thinks he is on older hboot and then use latest T-Mobile ruu. I hope and it should work.
Sent from my HTC Desire S using xda premium
i would do this:
unlock with htcdev.com
downgrade hboot to 0.98.0000
use revolutionary for s-off
change cid to supercid
relock bootloader again
and flash the ruu of youre dreams.
think this should do it
This worked for me in the same situation
http://forum.xda-developers.com/showthread.php?t=1443636
Is there a way to get adb terminal access when the phone won't actually load a ROM?
Because all the tutorials I can find for downgrading HBOOT or installing an older ROM (with misc_version etc) - seem to require adb access. I can *only* get into fastboot or a recovery tool like clockworkmod recovery.
Installs of ROMs just aren't working at all. I'm getting "Security Fail" on some of the official ROMs, and the custom roms just aren't working (I assume because of S-ON).
FrakEarth said:
Is there a way to get adb terminal access when the phone won't actually load a ROM?
Because all the tutorials I can find for downgrading HBOOT or installing an older ROM (with misc_version etc) - seem to require adb access. I can *only* get into fastboot or a recovery tool like clockworkmod recovery.
Installs of ROMs just aren't working at all. I'm getting "Security Fail" on some of the official ROMs, and the custom roms just aren't working (I assume because of S-ON).
Click to expand...
Click to collapse
Only if you left on USB dedebuging if it's off then sorry can't. Bet if its o n you can easy make him to boot into fastboot. Take a try, and you need to be installed sdk and adb tools on, PC. Try switch on phone put into USB and open terminal, write adb devices if it works there will show a list and HTXXXXXXXXXX something. If it so then adb reboot - bootloader or if you have custom recovery boot there. If don't anderstand look commands in Wikipedia about adb. Good luck
Sent from my HTC Desire S using xda premium
Okay guys, managed to get this sorted.
Firstly, I read that if you mounted /system from Clockwork mod that ADB commands work... well I didn't get to try that out, because something else worked.
One of the reason RUU updates were failing was because the bootloader was unlocked, when I relocked (fastboot oem lock) they started working again, but I was getting Carrier ID errors on the European RUUs and the T-Mobile ones were too old.
I decided to visit a friend who also has a Desire S and from his phone I was able to get the CID (card identification register) code from a smaller microSD card I have -- this was one I hadn't tried as a goldcard before, and I was unable to try without being able to get at the GoldCard Helper app on my phone... so after using his phone and writing down BOTH CIDs, I tried both and it worked -- I now have the phone updated fully using the European RUU.
I think my mistake the first time may have been copying the wrong CID from Goldcard Helper: if you press Menu > Copy Code it seems to copy the code from MMC1, whereas my SD card was clearly MMC2 -- so my goldcard.img was completely incorrect the first time I tried it. I don't know why the phone let me partially install the European RUU without a goldcard and almost brick the phone, but I suspect it was because I had the Revolutionary bootloader with S-OFF.
So in summary if you have this problem I would suggest borrowing an Android phone (any should work) to get the right goldcard CID needed and then try installing an RUU.
Many thanks to everyone who replied and tried to help me, you guys helped me exhaust every other possibility - and I appreciate it a lot! Thanks!
Hi guys,
I've got some ****y problem. So I was on Jelly Bean rom with revolutionary S-Off but wanted to have feature full phone and thought ok go back to stock (bad idea...)
So I followed a tutorial flashed Eng Hboot and wanted to restore with an O2 Gingerbread RUU. Everything worked fine until I got Error 140 (Bootloader failure)...Now I'm S-On but I don't have any rom on my phone so I'm stuck in recovery.
S-On
Hboot 0.98.0000
Radio 38.03.02.14_M
In my opinion I have to get a goldcard to flash a ruu on top of all that **** ^^ Buuut I can't boot so no ADB, hence I can't get my CID. Tried some tools to get CID via card reader but It didn't work for me.
Any Help, Suggestions? Help me to fix my android and avoid to buy an Iphone ^^
Cheers
main version check fail...that stopped the RUU
Have a go at fastboot, if that doesn't work it will need to be sent off to the repair center to be reprogrammed by JTAG experts.
Sent from my Nexus One using xda app-developers app
I can enter fastboot and do commands that's not the problem. Sadly my hboot seems to be too low for htcdev unlock -.- ...And I don't know of any method to get ADB working in bootloader, fastboot, ...
Can you get into recovery from fastboot? If so, you can run ADB from there.
Sent from my Desire S
Why not trying to flash the ruu that suits your carrier,
Besides, it's best not to use eng-hboot in order to get back to s-on, imho,it's best to upgrade hboot to revolutionary 7.x after using revolutionary s-off, it's compatible with most 2.3.5ruus and custom roms.
I can get into recovery but it is stock recovery...and adb doesn't recognize my device while i'm in there ...
The ruu suits my carrier, as I said the signature check was true but the version check failed...i would need a newer o2 ruu but that doesn't exist
help me pls^^
Can you flash a custom recovery, such as 4EXT or CWM, using a PG88IMG zip file on your sdcard?
Sent from my Desire S
Hey Bill thx for your help! I used an old phone wich could get into CWM Got CID of SD Card and did the Gold Card method! Flashing Ruu PG88IMG right now
btw. This can be closed
Wody05 said:
btw. This can be closed
Click to expand...
Click to collapse
Just add [Solved] at the front of the title on the original post (OP).
Sent from my Desire S
Hi.
Having issues regarding a stuck recovery at htc logo.
phone is:
unlocked, rooted
hboot is 2.00.0002
S-ON
i would really like to downgrade to 0.9x so that i can use revolutionary to flash whatever i want.
i have tried everything in this thread:
http://forum.xda-developers.com/show....php?t=1447062
nothing works.
can not get another hboot in to the phone.
can anyone help me?
PS yes i have checked the official thread, makes no sense to me.
Since you're unlocked (but why? you could have gone S-OFF just as easily without unlocking) you can simply download a custom recovery and do:
Code:
fastboot boot recovery.img
Then use misc_version to lower your base version and then you can relock the bootloader, run an older RUU, and use revolutionary.
I have successfully Rooted the device and obtained superCID, S-Off, and Network Unlock using a manual instruction thread elsewhere, however I have a few questions i am unable to find, the first one is reguarding the mmcblk's and which blocks are pointed to the different mount points for this phone, for example which block does the hboot reside on, or the boot image or recovery, ive searched google and forums and can't seem to find the info for this phone specifically, and help would be greatly appreciated. The second question is reguarding the ENG S-Off Hboot, as i understand it the later phones got shipped with gingerbread and using the known hboot was for froyo, and ends up making the phone boot very slowly, is their any tool that can be used to create an engineering hboot for GB or should I just leave it be?
Wildcat2083 said:
I have successfully Rooted the device and obtained superCID, S-Off, and Network Unlock using a manual instruction thread elsewhere, however I have a few questions i am unable to find, the first one is reguarding the mmcblk's and which blocks are pointed to the different mount points for this phone, for example which block does the hboot reside on, or the boot image or recovery, ive searched google and forums and can't seem to find the info for this phone specifically, and help would be greatly appreciated. The second question is reguarding the ENG S-Off Hboot, as i understand it the later phones got shipped with gingerbread and using the known hboot was for froyo, and ends up making the phone boot very slowly, is their any tool that can be used to create an engineering hboot for GB or should I just leave it be?
Click to expand...
Click to collapse
To find the partition table you can use this command:
Code:
fastboot oem list_partition_emmc
Regarding the ENG S-OFF you don't need ENG S-OFF to flash anything at all. Having S-OFF is more than enough and safer. You can flash the modified ENG S-OFF included in the AAHK2, using the original ENG S-OFF will mess the bootloader as you said.
glevitan said:
To find the partition table you can use this command:
Code:
fastboot oem list_partition_emmc
Regarding the ENG S-OFF you don't need ENG S-OFF to flash anything at all. Having S-OFF is more than enough and safer. You can flash the modified ENG S-OFF included in the AAHK2, using the original ENG S-OFF will mess the bootloader as you said.
Click to expand...
Click to collapse
Thank you, I got the nodded eng hboot without a hitch, now to figure out all these fastboot commands