Related
So I've searched the forums for an answer to my question and haven't found anything so here it goes...
I downloaded BB v5 from Pete's site and went through one-click root and flashing my rom, and backing up my device. I mounted my SD card to my computer moved bugless beast over to my root, renamed it 'update' and powered off my phone. Powered in recovery and tried to reinstall packages and got an error: error at installation, installation aborted error at write_raw_data or something to that effect. google'd and came to the conclusion that through me trying to hurry to download BB i did not wipe/clear data. Now my phone sits at the "AT&T World Phone" screen and will not go any further. Tried to power down and power back up in recovery and don't have the access to restore my backups. tried to plug my phone back into my computer and i can not access my SD card from my computer to delete the BB zip and add the original 'update' zip. Tried to enter download mode and run Odin3 but still can not access my SD card, so Odin doesn't run, just says 'complete' I'm assuming because it can't find the device.
I've heard these phones are hard to truly 'brick'. Please tell me someone can help me and tell me that this is fixable.
Thanks,
A
Which odin did you use? Odin 1 click jf6? If not you should try that. Dl mode, plug in, press start. It should boot.
Sent from my GT-I9000 using XDA App
xcentrik05 said:
So I've searched the forums for an answer to my question and haven't found anything so here it goes...
I downloaded BB v5 from Pete's site and went through one-click root and flashing my rom, and backing up my device. I mounted my SD card to my computer moved bugless beast over to my root, renamed it 'update' and powered off my phone. Powered in recovery and tried to reinstall packages and got an error: error at installation, installation aborted error at write_raw_data or something to that effect. google'd and came to the conclusion that through me trying to hurry to download BB i did not wipe/clear data. Now my phone sits at the "AT&T World Phone" screen and will not go any further. Tried to power down and power back up in recovery and don't have the access to restore my backups. tried to plug my phone back into my computer and i can not access my SD card from my computer to delete the BB zip and add the original 'update' zip. Tried to enter download mode and run Odin3 but still can not access my SD card, so Odin doesn't run, just says 'complete' I'm assuming because it can't find the device.
I've heard these phones are hard to truly 'brick'. Please tell me someone can help me and tell me that this is fixable.
Thanks,
A
Click to expand...
Click to collapse
Restore stock then try again. I will be moving this thread since its not really a dev thread.
http://forum.xda-developers.com/showthread.php?t=731989
tiger4j said:
Which odin did you use? Odin 1 click jf6? If not you should try that. Dl mode, plug in, press start. It should boot.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
You have this wrong, to properly use odin you need to:
-Open Odin
-Power down phone/remove batter (some people suggest removing sim and sd card)
-Plug phone to computer while holding the vol buttons or just up or down depending on phone
-Phone should get to download mode and press start
If this doesn't work its possible your three button combo is dicked.
It worked! thanks for the help guys. I had the phone in download mode before i opened odin, odin cleaned me, sorry for being a noob
Again, thanks for the help guys
I am new here and searched for a similar problem but can't seem to find one just like mine. This is my first time to root this phone but have been successful in the past with others. I have a Galaxy Blaze I just bought and attempted to root with blaze.pit and blaze-root-kernel.tar in pit and PDA sections of ODIN respectively. It appeared all went well with a PASS from Odin reporting All threads completed. (Successful 1/faliled 0).
The phone auto rebooted while connected to the PC but froze on the blue "loading" bar (that's what I call it) and is frozen on the battery charging indicator screen which does increment when plugged into AC. If I push the power button it just buzzes. I never got so far as to load a ROM which is what leads me to think my question may be new but stupid me if digging through here didn't turn up what I'm looking for. This is my only phone and I'm SOL without it. I'm afraid I might have gotten the files from an old source (suspicion) and would appreciate any guidance getting me back where I was or rooted so I may continue.
I can get into load mode so not all is lost, except for me. Thanks for any kind person that would take a moment to bail me out.
Update
mikesmccurdy said:
I am new here and searched for a similar problem but can't seem to find one just like mine. This is my first time to root this phone but have been successful in the past with others. I have a Galaxy Blaze I just bought and attempted to root with blaze.pit and blaze-root-kernel.tar in pit and PDA sections of ODIN respectively. It appeared all went well with a PASS from Odin reporting All threads completed. (Successful 1/faliled 0).
The phone auto rebooted while connected to the PC but froze on the blue "loading" bar (that's what I call it) and is frozen on the battery charging indicator screen which does increment when plugged into AC. If I push the power button it just buzzes. I never got so far as to load a ROM which is what leads me to think my question may be new but stupid me if digging through here didn't turn up what I'm looking for. This is my only phone and I'm SOL without it. I'm afraid I might have gotten the files from an old source (suspicion) and would appreciate any guidance getting me back where I was or rooted so I may continue.
I can get into load mode so not all is lost, except for me. Thanks for any kind person that would take a moment to bail me out.
Click to expand...
Click to collapse
I shoult mention that I did try to follow http://forum.xda-developers.com/showthread.php?t=1591601 but was not able to get the TAR file to download.
What version(ICS or GB) were you on when you tried to root? There are root methods that are different for both ICS and GB... Since you can boot into download mode, try getting Clockwordmod on your blaze via Odin. Then from there mount your device(via CWM) and transfer a ROM you want to try out. Don't forget Gapps... then wipe data/cache/dalvik and flash them both..
im_awesome_right? said:
What version(ICS or GB) were you on when you tried to root? There are root methods that are different for both ICS and GB... Since you can boot into download mode, try getting Clockwordmod on your blaze via Odin. Then from there mount your device(via CWM) and transfer a ROM you want to try out. Don't forget Gapps... then wipe data/cache/dalvik and flash them both..
Click to expand...
Click to collapse
^^^ he's right... I did the same thing when I got my Blaze. I forgot to uncheck Repartition. You have to UN-check it after you select the tar and pit. it auto checks repartition once those are selected.
go to the CWM post http://forum.xda-developers.com/showthread.php?t=1591622 and flash CWM via Odin. FOLLOW THE DIRECTIONS CAREFULLY Then if you're able to get into recovery, download whatever Rom you want to your pc, and inside recovery go into Mounts and Storage->Mount USB Storage and plug your phone into the computer. you should then be able to copy the downloaded Rom to your phone (make sure you know whether its your internal or external SD card. Then hit +++Go Back+++ twice and choose Install Zip from SD Card. The pick one: Choose zip from sdcard or choose zip from internal sd card. then navigate to the rom's zip, install, wipe data/factory reset, wipe cache, wipe dalvik, reboot phone and you ***should*** be good to go.
Still trying and eternally grateful
jparnell8839 said:
^^^ he's right... I did the same thing when I got my Blaze. I forgot to uncheck Repartition. You have to UN-check it after you select the tar and pit. it auto checks repartition once those are selected.
go to the CWM post http://forum.xda-developers.com/showthread.php?t=1591622 and flash CWM via Odin. FOLLOW THE DIRECTIONS CAREFULLY Then if you're able to get into recovery, download whatever Rom you want to your pc, and inside recovery go into Mounts and Storage->Mount USB Storage and plug your phone into the computer. you should then be able to copy the downloaded Rom to your phone (make sure you know whether its your internal or external SD card. Then hit +++Go Back+++ twice and choose Install Zip from SD Card. The pick one: Choose zip from sdcard or choose zip from internal sd card. then navigate to the rom's zip, install, wipe data/factory reset, wipe cache, wipe dalvik, reboot phone and you ***should*** be good to go.
Click to expand...
Click to collapse
Thank you so much for the input. I must be totally stupid because Odin loaded Clockwork mod without a hitch but it still freezes at the end of the blue bar and will no further. Odin reoorts pass When I boot do downloading... it only gives me the product name sgh-t789 Custom Binary Download Yes: (4counts) and current binary Custom. There is always a chance that I forgot to uncheck ro-partiton but I was pretty careful. All this to get rod of pages of bloatware...rrgh. Thanks so much to thos who have given me input so far. Unfortunatly I am not sure what I ws running in the first place but I imagine it was not ICS. I can't afford a new phone and know I must get past this!!! Thanks a million guys. I will try to find a rom to flash and see but am not even sure how to get into Cloclwork on ths silly thing yet.
To get into recovery you must do the volume buttons/power button hold. It's explained in the rooting thread. It's not hard, just follow the instructions. You shouldn't have to remove the battery, just turn off your phone, then hold all 3 buttons, release the power button after about 10 seconds but keep holding volume buttons until recovery comes up in your phone.
Sent from NOS_INJECTED ParanoidAndroid Blaze
Still trying and eternally grateful
njstein said:
To get into recovery you must do the volume buttons/power button hold. It's explained in the rooting thread. It's not hard, just follow the instructions. You shouldn't have to remove the battery, just turn off your phone, then hold all 3 buttons, release the power button after about 10 seconds but keep holding volume buttons until recovery comes up in your phone.
Sent from NOS_INJECTED ParanoidAndroid Blaze
Click to expand...
Click to collapse
Thank you. I am able to get into recovery mode without an issue and odin reports that Clockwork Mod Passed but I stil can't get past the blue bar locking up when it reaches the end. I must be missing something stupid as I cand even get Odin to recoginze the stock download so I can try to start over. rrgh. I know I'm missing something stupid but it seems to me that when I boot the phone into recovery I should see a clockworkmod screen giving me boot oprions but not sure what I should be seeing am flying a bit blind. Would appreciate good recommendation of a rom to try and download and where I might find it. I do notice that the rocovery mode screen increments the custom binary dowload indicator everytime I try something.
Im thinking you might have forgotten to repartition the phone. Make sure its selected so you can have a clean partition and redo the steps to root it and see if that works.
The Barron said:
Im thinking you might have forgotten to repartition the phone. Make sure its selected so you can have a clean partition and redo the steps to root it and see if that works.
Click to expand...
Click to collapse
As said above. The mistake was that he clicked repartition.
Sent from my Provisioned Galaxy S Blaze
strange, i always thought you had to partition, at least at some point.
Anywho, if you can get into recovery (and since you said odin loaded cwm) couldn't you just put a rom onto a SD card, pop it in, and just install it with cwm?
The Barron said:
strange, i always thought you had to partition, at least at some point.
Anywho, if you can get into recovery couldn't you just put a rom onto a SD card, pop it in, and just install it with cwm?
Click to expand...
Click to collapse
Also said above...
Bootloader is bad? Doubt it, but only thing i can think of right now.
Still grateful......
The Barron said:
strange, i always thought you had to partition, at least at some point.
Anywho, if you can get into recovery (and since you said odin loaded cwm) couldn't you just put a rom onto a SD card, pop it in, and just install it with cwm?
Click to expand...
Click to collapse
Oddly CWM reports as having loaded in Odin but I cant access it to load a mod unless there is a trick to getting to CWM I haven't figured out yet. I'm also a bit confused that Odin only recognizes TAR files when the mods I downloaded ie liquid are in zip format and not recognized by Odin. sorry for asking stupid questions but I sincerely appreciate the time you all take to respond. I am detrermined to fix this one. I was pretty careful to uncheck repartition but there is always the chance I missed it once.
mikesmccurdy said:
Oddly CWM reports as having loaded in Odin but I cant access it to load a mod unless there is a trick to getting to CWM I haven't figured out yet. I'm also a bit confused that Odin only recognizes TAR files when the mods I downloaded ie liquid are in zip format and not recognized by Odin. sorry for asking stupid questions but I sincerely appreciate the time you all take to respond. I am detrermined to fix this one. I was pretty careful to uncheck repartition but there is always the chance I missed it once.
Click to expand...
Click to collapse
Zips are flashed in CWM.. Not in Odin..
Sent from my Provisioned Galaxy S Blaze
mikesmccurdy said:
Oddly CWM reports as having loaded in Odin but I cant access it to load a mod unless there is a trick to getting to CWM I haven't figured out yet. I'm also a bit confused that Odin only recognizes TAR files when the mods I downloaded ie liquid are in zip format and not recognized by Odin. sorry for asking stupid questions but I sincerely appreciate the time you all take to respond. I am detrermined to fix this one. I was pretty careful to uncheck repartition but there is always the chance I missed it once.
Click to expand...
Click to collapse
to get to download mode, you need to either have a jig or to have your phone plugged into your computer while pressing VOL UP + VOL DOWN and PWR. that will get you to Download (Odin) Mode. To get to CWM Recovery, Unplug your phone from your computer and press VOL UP + VOL DOWN and PWR. The phone will do a short vibrate and the Samsung logo will appear. Then you will see ClockworkMod Recovery at the top with options. If you have standard (non-touch) CWM, use volume up and volume down to navigate and select your choice with the power button (short presses, a long press will power off). Go to mounts and storage -> mount usb storage. then copy your ROM of choice to your phone. go back twice and then enter install zip from sdcard. then either Choose zip from sdcard or Choose zip from internal sdcard. install. wipe data, wipe cache, wipe dalvik. reboot. win.
Continued thanks.....
jparnell8839 said:
to get to download mode, you need to either have a jig or to have your phone plugged into your computer while pressing VOL UP + VOL DOWN and PWR. that will get you to Download (Odin) Mode. To get to CWM Recovery, Unplug your phone from your computer and press VOL UP + VOL DOWN and PWR. The phone will do a short vibrate and the Samsung logo will appear. Then you will see ClockworkMod Recovery at the top with options. If you have standard (non-touch) CWM, use volume up and volume down to navigate and select your choice with the power button (short presses, a long press will power off). Go to mounts and storage -> mount usb storage. then copy your ROM of choice to your phone. go back twice and then enter install zip from sdcard. then either Choose zip from sdcard or Choose zip from internal sdcard. install. wipe data, wipe cache, wipe dalvik. reboot. win.
Click to expand...
Click to collapse
My problem is that I am not able to get into CWM. I am able to get into Odin mode but I get the vibrate when trying to boot into CWM then the Samsung logo then the blue bar that freezes when it reaches the end. After that when I try a regular boot all I see is the battery indicator if I have it plugged into power. I really appreciate these detailed instructions, but until I can get past the blue bar, I am stuck.......
Do you let go of the vol button and power before the Samsung logo? If you do then hold the buttons until the logo appears then let them go. If you let go early it just boots like normal
Sent from my SAMSUNG-SGH-T769 using xda premium
Problem Escalating
woodzx67 said:
Do you let go of the vol button and power before the Samsung logo? If you do then hold the buttons until the logo appears then let them go. If you let go early it just boots like normal
Sent from my SAMSUNG-SGH-T769 using xda premium
Click to expand...
Click to collapse
Search as I might I can't seem to get past this. I have CWM loaded but am getting an error mounting sdcard when I try and e: unable to write to ums lunfile when I try to mount USB. I'm getting in deeper here and would appreciate any further advice.
mikesmccurdy said:
Search as I might I can't seem to get past this. I have CWM loaded but am getting an error mounting sdcard when I try and e: unable to write to ums lunfile when I try to mount USB. I'm getting in deeper here and would appreciate any further advice.
Click to expand...
Click to collapse
I'd try reflashing CWM... something doesnt seem right. its like your mount points are all screwy.
http://forum.xda-developers.com/showthread.php?t=1591622
make sure to use the pit file located in that thread
--------------------EDIT-----------------------------
Just used the files (CWM and pit through Odin) and CWM flashed successfully for me. Able to do a nandroid backup and restore as well as flash a new ROM.
Also, please dont get mad for this, but just to be on the safe side (had a person last week who mistakenly did this) this is the Galaxy S Blaze 4G, not the Galaxy S 4G. If your device model isn't T769, you've got the wrong forum
I had the same issue today with s3 that I fixed will by restoring stock ........,.,...
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
Samsung Galaxy s 4g T959V-Gingerbread. Rooted it with SuperOneClick... Didnt have CWM. when I tried to install Black Ice and ICNINB. Tried doing with Rom Manager. Then read that doesn't work with this phone. Was able to flash AltonX KJ6 kernal through SGS kernel flasher in order or get CWM on the phone. That worked. But when I went to flash the zip files for the roms again. They still didn't work. I thought I was following the directions. Get into download mode> create a backup> wipe data> make sure the mounts were right> then flash the zip file. Well the first time I did i,t it kinda went through. Although I didn't have RED CWM or Linda. Wanted to get Voodoo and LagFix. So I decided to flash again. When it came time to reboot.. it got stuck in a loop between two different Samsung screens.One with a big swoopy S the other just the normalt-mobile samsung screen before it boots up. Going from one to the other never really rebooting. So again I decided to get into download mode again and then flash a recovery backup file. And NOW it just hangs on the Samsung T-Moblie screen. I've tried battery pulls also tried using a JIG. Screen pops up but just freezes there.
Any suggestions??
pistol865 said:
Samsung Galaxy s 4g T959V-Gingerbread. Rooted it with SuperOneClick... Didnt have CWM. when I tried to install Black Ice and ICNINB. Tried doing with Rom Manager. Then read that doesn't work with this phone. Was able to flash AltonX KJ6 kernal through SGS kernel flasher in order or get CWM on the phone. That worked. But when I went to flash the zip files for the roms again. They still didn't work. I thought I was following the directions. Get into download mode> create a backup> wipe data> make sure the mounts were right> then flash the zip file. Well the first time I did i,t it kinda went through. Although I didn't have RED CWM or Linda. Wanted to get Voodoo and LagFix. So I decided to flash again. When it came time to reboot.. it got stuck in a loop between two different Samsung screens.One with a big swoopy S the other just the normalt-mobile samsung screen before it boots up. Going from one to the other never really rebooting. So again I decided to get into download mode again and then flash a recovery backup file. And NOW it just hangs on the Samsung T-Moblie screen. I've tried battery pulls also tried using a JIG. Screen pops up but just freezes there.
Any suggestions??
Click to expand...
Click to collapse
you don't want voodoo lagfix. unreliable, imho.
Try eollie's stock + root in the second post my oneclick thread. It's a stock rom and blastoff v2.5.
Run the oneclick the first time to flash just the kernel and rom.
Click flash bootloaders.
reboot phone to download mode again
flash again, this time with bootloaders.
After that, you should be golden.
Don't forget to read the directions in the OP.
bhundven said:
you don't want voodoo lagfix. unreliable, imho.
Try eollie's stock + root in the second post my oneclick thread. It's a stock rom and blastoff v2.5.
Run the oneclick the first time to flash just the kernel and rom.
Click flash bootloaders.
reboot phone to download mode again
flash again, this time with bootloaders.
After that, you should be golden.
Don't forget to read the directions in the OP.
Click to expand...
Click to collapse
Thank you so much for getting back to me. A couple of questions if I may?
1) if I'm able to get the samsung screen, does that mean I'm able to get into Download mode? It just seems to hang on that samsung T-Mobile screen.
2) The link to dropbox that I'm supposed too click on, seems to be broken... Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel)- https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar -
Here's what comes up: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
3) Assuming that I'm able to get to download mode, I just want to check to make sure that I'm reading your directions correctly.
- when I run OneClick the 1st time, it will automatically apply just the kernel and rom.
- Then I'm supposed to reboot? Or flash the bootloaders?
- After that I'm supposed to reboot phone to download mode again.
- Flash Bootloaders again??
I'm sure I'm messing up the directions or rather misreading them.
Sorry for that. Kinda NOOB when it comes to HEIDENALL
pistol865 said:
Thank you so much for getting back to me. A couple of questions if I may?
Click to expand...
Click to collapse
Well, seeming it is the Q&A forum
pistol865 said:
1) if I'm able to get the samsung screen, does that mean I'm able to get into Download mode? It just seems to hang on that samsung T-Mobile screen.
Click to expand...
Click to collapse
Yes. Sometimes even if the phone seems to turn on and go to a black screen, you might still be able to get to download mode.
Seriously, this phone is like a tank... unless you flash gt-i9000 or vibrant roms. Then you will brick your phone.
pistol865 said:
2) The link to dropbox that I'm supposed too click on, seems to be broken... Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel)- https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar -
Here's what comes up: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
Click to expand...
Click to collapse
Dang, I'm uploading a new link to this. Give it 20 minutes. and go back and try the link again.
pistol865 said:
3) Assuming that I'm able to get to download mode, I just want to check to make sure that I'm reading your directions correctly.
- when I run OneClick the 1st time, it will automatically apply just the kernel and rom.
- Then I'm supposed to reboot? Or flash the bootloaders?
- After that I'm supposed to reboot phone to download mode again.
- Flash Bootloaders again??
I'm sure I'm messing up the directions or rather misreading them.
Sorry for that. Kinda NOOB when it comes to HEIDENALL
Click to expand...
Click to collapse
Put your phone into download mode, either by holding vol+ and vol- and plugging in the usb from your computer (keep holding vol+ and vol- till you see download mode) or use a jig.
Once your in download mode. Flash the first time. Yes, it will only flash the kernel and rom. The phone will automatically reboot after the flash.
Wait a little bit after the phone reboots, you'll see a little local update happen and reboot the phone again. Then pull the battery and put the phone back into download mode.
Then check the "flash bootloaders" checkbox. flash the oneclick again this time with bootloaders.
After this, you can go anywhere from this rom, except back to froyo. I'm still working on a simple oneclick method for going back to froyo.
bhundven said:
Well, seeming it is the Q&A forum
Yes. Sometimes even if the phone seems to turn on and go to a black screen, you might still be able to get to download mode.
Seriously, this phone is like a tank... unless you flash gt-i9000 or vibrant roms. Then you will brick your phone.
Dang, I'm uploading a new link to this. Give it 20 minutes. and go back and try the link again.
Put your phone into download mode, either by holding vol+ and vol- and plugging in the usb from your computer (keep holding vol+ and vol- till you see download mode) or use a jig.
Once your in download mode. Flash the first time. Yes, it will only flash the kernel and rom. The phone will automatically reboot after the flash.
Wait a little bit after the phone reboots, you'll see a little local update happen and reboot the phone again. Then pull the battery and put the phone back into download mode.
Then check the "flash bootloaders" checkbox. flash the oneclick again this time with bootloaders.
After this, you can go anywhere from this rom, except back to froyo. I'm still working on a simple oneclick method for going back to froyo.
Click to expand...
Click to collapse
Once again, many thanks for your time and patience
.Just wondering if you fixed that link yet?
I keep clicking on: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) , it takes me to this page: https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar, but I'm still getting the message: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
That link is Underneath the link: eollie: AntonX's BwaT + Stock Rom... on the page: http://forum.xda-developers.com/showthread.php?t=1358498 .
Again, pardon my detailed reply, but I just want to be sure that I'm clicking on the correct link.
pistol865 said:
Once again, many thanks for your time and patience
.Just wondering if you fixed that link yet?
I keep clicking on: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) , it takes me to this page: https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar, but I'm still getting the message: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
That link is Underneath the link: eollie: AntonX's BwaT + Stock Rom... on the page: http://forum.xda-developers.com/showthread.php?t=1358498 .
Again, pardon my detailed reply, but I just want to be sure that I'm clicking on the correct link.
Click to expand...
Click to collapse
Yea man. I updated the second post in the onclick thread. Here is the timestamp from the post: "24th July 2013 12:39 PM"
You need to clear the cache on your browser and reload that page. The link is here.
bhundven said:
Yea man. I updated the second post in the onclick thread. Here is the timestamp from the post: "24th July 2013 12:39 PM"
You need to clear the cache on your browser and reload that page. The link is here.
Click to expand...
Click to collapse
Ran into a new problem now...
It's me again... Sorry if I'm being a pain..
So I downloaded the link.. I have it on my desktop...I put my phone into download mode..(Yellow Triangle> Do not unplug).. I clicked on your OneClick... it loads but then tells me to connect my device... It keeps telling me I'm disconnected..
When I plug my phone into my compt via USB.. it now tells me that my device is unrecognized.
Now what did I do wrong?
I was hoping I was close to a resolution... another roadblock.
Can I fix it?
Once again, thank you for any and all the help and advice you have given me.
There is s thread called fresh out of the box now what. It will help you immensely. Sounds like you need to uninstall all samsung and android drivers and reinstall them. In that thread there is a application for your computer called usbview that can remove them (I probably misspelled that apps name). The thread is by lumin30.
limeaide said:
There is s thread called fresh out of the box now what. It will help you immensely. Sounds like you need to uninstall all samsung and android drivers and reinstall them. In that thread there is a application for your computer called usbview that can remove them (I probably misspelled that apps name). The thread is by lumin30.
Click to expand...
Click to collapse
I already installed usbDview.. ran as admisistrator... removed anything that said samsung or android.. plugged in my samsung phone and Still is not recognized. Also downloaded Zadig.. to install the drivers to the phone.. but it doesn't recognize the phone.
Anything else that I'm missing? Can I download something online so that when i plug in via USB it will recognize my phone?
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
limeaide said:
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
Click to expand...
Click to collapse
Tried different usb ports as well as a different computer.. When I hoked up to a different computer, at first it said it was installing the drivers.. then it stopped and said USB device Unrecognized.
Is it a matter of drivers? Can I get them offline? and then plug in my phone?
limeaide said:
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
Click to expand...
Click to collapse
Computer pop up says: usb device has malfunctioned and windows does not recognize it.
limeaide said:
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
Click to expand...
Click to collapse
I just went to the samsung website and downloaded the drivers from there.. Still having the same problem... usb device has malfunctioned and windows does not recognize it.
IIRC when you plug the phone in you need to stop it from installing the samsung drivers. Then use zadig to install them like illustrated in lumin30s guide.
Be sure to use a rear usb port if on a desktop. Dont change ports if things start to work. If you have to use a different port I suggest using usbdeview to remove drivers each time. It seems like overkill but it might work.
limeaide said:
IIRC when you plug the phone in you need to stop it from installing the samsung drivers. Then use zadig to install them like illustrated in lumin30s guide.
Be sure to use a rear usb port if on a desktop. Dont change ports if things start to work. If you have to use a different port I suggest using usbdeview to remove drivers each time. It seems like overkill but it might work.
Click to expand...
Click to collapse
ALMOST THERE.. I think..lol
I think I successfully ran the program.. phone turns on now.. Yayyy...
New Problem:
The screen now says:NO SIM CARD IN PHONE
AFTER YOU INSERT THE CARD, PLEASE REBOOT
EMERGENCY CALLS CAN BE USED
The SIM card is already installed... the phone is not recognizing it now.
What now??
limeaide said:
IIRC when you plug the phone in you need to stop it from installing the samsung drivers. Then use zadig to install them like illustrated in lumin30s guide.
Be sure to use a rear usb port if on a desktop. Dont change ports if things start to work. If you have to use a different port I suggest using usbdeview to remove drivers each time. It seems like overkill but it might work.
Click to expand...
Click to collapse
One more thing, I installed Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel)... That should mean the phone is rooted.. correct? although I don't see SUPERUSER in my apps list.. Also does this have CWM installed? Can I flash a custom rom moving forward?? If so which one do you consider the best? I originally was having trouble because I was running into low internal memory and couldn't download many apps. That's why I wanted to flash BLACK ICE originally.. I thought that would fix my problem..
This phone suffers from low internal memory. However you can move almost all apps to your sdcard from within the rom. If the things that do not work on the JB roms are ok with you I hear good things about those.
As for the sim card..Im not sure. The one click you used doesnt have SU included because it is a stock rom with custom rooted kernel. You would have to install it from the Play store. But I reccomend flashing a different rom anyway. Again the JB roms seem to be pretty awesome so that is a option.
limeaide said:
This phone suffers from low internal memory. However you can move almost all apps to your sdcard from within the rom. If the things that do not work on the JB roms are ok with you I hear good things about those.
As for the sim card..Im not sure. The one click you used doesnt have SU included because it is a stock rom with custom rooted kernel. You would have to install it from the Play store. But I reccomend flashing a different rom anyway. Again the JB roms seem to be pretty awesome so that is a option.
Click to expand...
Click to collapse
Did I do something wrong because I didn't pull the sim card when I flashed: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel). Also does Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) come with CWM Red?
pistol865 said:
Did I do something wrong because I didn't pull the sim card when I flashed: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel). Also does Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) come with CWM Red?
Click to expand...
Click to collapse
reboot to cwm (recovery). wipe cache partition. advanced -> wipe dalvik cache. advanced -> fix permissions. reboot phone. Let it sit for a few minutes before doing anything (I'd say 10-15 minutes).
Oh weird. did that oneclick come with blastoff v2 and not 2.5?
Hmm, then do this. download blastoff v2.5, put that on your sdcard and install it from red cwm.
Then do what I said above. You should be back to blue after rebooting to recovery after flashing that kernel.
EDIT: if you really want red cwm (voodoo lagfix), I really don't know why you'd want that, but checkout my older subtly modified stock kernel.
bhundven said:
reboot to cwm (recovery). wipe cache partition. advanced -> wipe dalvik cache. advanced -> fix permissions. reboot phone. Let it sit for a few minutes before doing anything (I'd say 10-15 minutes).
Oh weird. did that oneclick come with blastoff v2 and not 2.5?
Hmm, then do this. download blastoff v2.5, put that on your sdcard and install it from red cwm.
Then do what I said above. You should be back to blue after rebooting to recovery after flashing that kernel.
EDIT: if you really want red cwm (voodoo lagfix), I really don't know why you'd want that, but checkout my older subtly modified stock kernel.
Click to expand...
Click to collapse
No..no.. I'll definitely take your word for it.. I'll stick with the blue. I just thought that with the lagfix, it would fix my problem with internal memory.
My problem now is my SIM card.. The phone reboots and I get : NO SIM CARD IN PHONE
AFTER YOU INSERT THE CARD, PLEASE REBOOT
EMERGENCY CALLS CAN BE USED]
I did as you said:
reboot to cwm (recovery). wipe cache partition. advanced -> wipe dalvik cache. advanced -> fix permissions. reboot phone. Let it sit for a few minutes before doing anything (I'd say 10-15 minutes).
Should I still install: download blastoff v2.5?
Thank you again for ALL your help.. You guys saved my phone..
I have searched all over the web and this forum and after literally days of searching all I have found seem to be from late 2011. And none of the several methods will to root my Galaxy Tab 7.7 i815 Verizon LTE tablet. My question is, is there a current way to root my tablet? I really want to root and custom rom my tablet, but I am ready to pull my hair out. I have rooted my Galaxy S4 and flashed a custom rom and it was so easy, and is just so much better. I woulsd love to flash a Jelly Bean rom on this tablet, thats my goal. Any help would be hugely appreciated. Thanks
ddrumbum said:
I have searched all over the web and this forum and after literally days of searching all I have found seem to be from late 2011. And none of the several methods will to root my Galaxy Tab 7.7 i815 Verizon LTE tablet. My question is, is there a current way to root my tablet? I really want to root and custom rom my tablet, but I am ready to pull my hair out. I have rooted my Galaxy S4 and flashed a custom rom and it was so easy, and is just so much better. I woulsd love to flash a Jelly Bean rom on this tablet, thats my goal. Any help would be hugely appreciated. Thanks
Click to expand...
Click to collapse
You don't need to root to install a custom ROM. You need to flash a recovery, and then use that to flash the ROM. I'm not sure if Verizon added more difficulties to install a recovery, though; my P6800 was as easy as it gets to go from Honeycomb to anything else.
Recoveries: http://forum.xda-developers.com/showthread.php?t=2352967
JB ROMs: http://forum.xda-developers.com/showthread.php?t=2139766
Good luck!
Steve_max said:
You don't need to root to install a custom ROM. You need to flash a recovery, and then use that to flash the ROM. I'm not sure if Verizon added more difficulties to install a recovery, though; my P6800 was as easy as it gets to go from Honeycomb to anything else.
Recoveries: http://forum.xda-developers.com/showthread.php?t=2352967
JB ROMs: http://forum.xda-developers.com/showthread.php?t=2139766
Good luck!
Click to expand...
Click to collapse
Thanks Steve! I feel like an idiot looking all over for a root and not a flash. Ok could you tell the steps to flash this please. Please forgive my noobness, and thank you so much for your reply! I think I have an idea how to do it, but I just want to be certain.
I need the same thing. Let me know how it works out
ddrumbum said:
Thanks Steve! I feel like an idiot looking all over for a root and not a flash. Ok could you tell the steps to flash this please. Please forgive my noobness, and thank you so much for your reply! I think I have an idea how to do it, but I just want to be certain.
Click to expand...
Click to collapse
taiwwa said:
I need the same thing. Let me know how it works out
Click to expand...
Click to collapse
I'd rather let someone who actually owns an i815 give you exact instructions, but the general idea for Samsung devices is:
- Get Odin on your PC, for example, from here
- Reboot your device to download mode (power off, then power it on while holding volume down or volume down + home)
- open Odin
- Put the recovery .tar (or .tar.md5) file on "PDA", DON'T CHANGE ANYTHING ELSE, and click "start". The file will flash, and then the device will reboot
- To enter the recovery, power on while holding power+vol. up
- Make a backup
- Factory reset
- Install the ROM .zip
I can't tell you if this works on the Verizon version, though; or if there is anything else involved. I have an international P6800, where this works fine. Maybe someone who has the same version can help?
Steve_max said:
I'd rather let someone who actually owns an i815 give you exact instructions, but the general idea for Samsung devices is:
- Get Odin on your PC, for example, from here
- Reboot your device to download mode (power off, then power it on while holding volume down or volume down + home)
- open Odin
- Put the recovery .tar (or .tar.md5) file on "PDA", DON'T CHANGE ANYTHING ELSE, and click "start". The file will flash, and then the device will reboot
- To enter the recovery, power on while holding power+vol. up
- Make a backup
- Factory reset
- Install the ROM .zip
I can't tell you if this works on the Verizon version, though; or if there is anything else involved. I have an international P6800, where this works fine. Maybe someone who has the same version can help?
Click to expand...
Click to collapse
okay, well,
First of all, I couldn't find the backup option so I just wiped the device.
Secondly, I have one of the CWM 10.1 zips on my sdcard. I keep on getting the error "failed to verify the whole file structure."
edit: okay, this is the real problem. I can't get the CWM or the TWRP recovery on the samsung tab 7.7 via Odin. That is the real problem.
Okay, I figured it out. Basically, the hiccups come from two things: have to make sure USB debugging is selected in the developer options in the settings.
Secondly, it appears that CWM needs to not have the USB plugged in when you want to activate its recovery mode.
Now, all I need to do is figure out how to install the play store.
And...I"m afraid that from now on, system updates means that the entire device gets wiped?
CM10.1 JB is sooo much better than the lousy Samsung touchwiz or whatever junk that they came up with.
It's all up and running with GAPPS too. Weirdly, for GAPPS, it's not a good idea to download your GAPPS while on a mac. Download on PC. The mac seems to automatically decompress zip files, and then if you recompress them, it does so in a way that CWM does not recognize.
Otherwise, it's okay. Some hiccups and oddities. I am running a build made in July 2013, by a guy in Hong Kong, I believe. Cyanogen updates don't come up with anything, not even old versions. Also, the lock screen is always in landscape mode for some reason, never portrait.
But this is how to do it...
Basically, the way it goes is this. You have to replace the recovery bootloader with a custom bootloader in order to load the custom build. You do this by Odin.
First step is getting the tablet ready. It has to be in USB debugging mode. You then have to power it off. Power it on again while holding on to the volume down button. get through the screen and wait. Then you connect it to the computer and run Odin. On the "PDA" tab, you select the CWM .tar file and hit "start."
Second step is to download a build of CWM and put it on a micro-sd card. Has to be in .zip format. Also, download the CWM GAPPS .zip file and put it on the microsd.
Third step is to unplug the device from USB, and go into recovery mode. You do this by turning it off. Then turn it on again while holding volume up.
You should see the CWM screen. Make sure to clear/reset the device and wipe out all caches. Then install from external sd card. I think you can also install the GAPPS after installing the OS.
Then reboot and you're good.
edit: landscape lock screen is just a checkbox in the setting.
New problem: really slow transfers to sd card through USB. Really really slow. Like 3-4x as slow as just connecting sd card to sd card reader.
taiwwa said:
It's all up and running with GAPPS too. Weirdly, for GAPPS, it's not a good idea to download your GAPPS while on a mac. Download on PC. The mac seems to automatically decompress zip files, and then if you recompress them, it does so in a way that CWM does not recognize.
Otherwise, it's okay. Some hiccups and oddities. I am running a build made in July 2013, by a guy in Hong Kong, I believe. Cyanogen updates don't come up with anything, not even old versions. Also, the lock screen is always in landscape mode for some reason, never portrait.
But this is how to do it...
Basically, the way it goes is this. You have to replace the recovery bootloader with a custom bootloader in order to load the custom build. You do this by Odin.
First step is getting the tablet ready. It has to be in USB debugging mode. You then have to power it off. Power it on again while holding on to the volume down button. get through the screen and wait. Then you connect it to the computer and run Odin. On the "PDA" tab, you select the CWM .tar file and hit "start."
Second step is to download a build of CWM and put it on a micro-sd card. Has to be in .zip format. Also, download the CWM GAPPS .zip file and put it on the microsd.
Third step is to unplug the device from USB, and go into recovery mode. You do this by turning it off. Then turn it on again while holding volume up.
You should see the CWM screen. Make sure to clear/reset the device and wipe out all caches. Then install from external sd card. I think you can also install the GAPPS after installing the OS.
Then reboot and you're good.
edit: landscape lock screen is just a checkbox in the setting.
New problem: really slow transfers to sd card through USB. Really really slow. Like 3-4x as slow as just connecting sd card to sd card reader.
Click to expand...
Click to collapse
FANTASTIC! THANK YOU SO MUCH! One last question. You said "Second step is to download a build of CWM and put it on a micro-sd card. Has to be in .zip format. Also, download the CWM GAPPS .zip file and put it on the microsd" So which ones did you use? I just don't want to screw anything up. Thanks again.
HELP!!
taiwwa said:
It's all up and running with GAPPS too. Weirdly, for GAPPS, it's not a good idea to download your GAPPS while on a mac. Download on PC. The mac seems to automatically decompress zip files, and then if you recompress them, it does so in a way that CWM does not recognize.
Otherwise, it's okay. Some hiccups and oddities. I am running a build made in July 2013, by a guy in Hong Kong, I believe. Cyanogen updates don't come up with anything, not even old versions. Also, the lock screen is always in landscape mode for some reason, never portrait.
But this is how to do it...
Basically, the way it goes is this. You have to replace the recovery bootloader with a custom bootloader in order to load the custom build. You do this by Odin.
First step is getting the tablet ready. It has to be in USB debugging mode. You then have to power it off. Power it on again while holding on to the volume down button. get through the screen and wait. Then you connect it to the computer and run Odin. On the "PDA" tab, you select the CWM .tar file and hit "start."
Second step is to download a build of CWM and put it on a micro-sd card. Has to be in .zip format. Also, download the CWM GAPPS .zip file and put it on the microsd.
Third step is to unplug the device from USB, and go into recovery mode. You do this by turning it off. Then turn it on again while holding volume up.
You should see the CWM screen. Make sure to clear/reset the device and wipe out all caches. Then install from external sd card. I think you can also install the GAPPS after installing the OS.
Then reboot and you're good.
edit: landscape lock screen is just a checkbox in the setting.
New problem: really slow transfers to sd card through USB. Really really slow. Like 3-4x as slow as just connecting sd card to sd card reader.
Click to expand...
Click to collapse
ddrumbum said:
FANTASTIC! THANK YOU SO MUCH! One last question. You said "Second step is to download a build of CWM and put it on a micro-sd card. Has to be in .zip format. Also, download the CWM GAPPS .zip file and put it on the microsd" So which ones did you use? I just don't want to screw anything up. Thanks again.
Click to expand...
Click to collapse
OK I followed your steps flawlessly, and my screen will not go past the paranoidandroid 3+ boot screen. Please help me I'm freaking out
Try framaroot. Install the app, usb debug on and root.
Now you can install recovery with a lot of apps.
Habby rooting
Okay so I've been at it for days and i mean like months.... when I first bought my 8 gb white Samsung galaxy tab 3 Kernel 3.4.5, android 4.1.2, model JZ054K.T210RUEAMK1 and all i have been running into is problems, like jittery display issues, or flickering display, I tried every method but none has worked but i finally found one and got it all working and running, First of all i would like to thank gr8nole for this method, and all who have helped him. So first let me explain the most easiest explanation for dummies like me, or noobs
Just and example video for visual learners http://www.youtube.com/watch?v=XolmtyvS3Yk&feature=youtu.be, but you want to click on the files i suggested on the bottom lol not what he has on his screen xD
Must Have: KIES, make sure you have fully updated rom from samsung themself which can be found on kies when you plug it in and update firmware, which your android should be on 4.1.2 and version because that's what i have
1. First lets Get all the files we need, First go download SM-T210.CWM.6.0.4.5.recovery.tar.zip at his xda post http://forum.xda-developers.com/showthread.php?t=2433853, after you have download that you will a friend name odin, which can be found here http://forum.xda-developers.com/showthread.php?t=2189539 (With odin you only want to use v3.07) and nothing else , Last but not least you want this file from gr8ole android-armeabi-universal-root-signed.zip and save that to your sd card or ext while click on usb debugging or w.e you wanna store in on tablet
so you should have odin 3.07
T210.CWM.6.0.4.5.recovery.tar.zip
android-armeabi-universal-root-signed.zip
2. Use the same method as g8nole and minor adjustments
Instructions:
1. Download ODIN on your computer (just do a google search to find it...version 3.07 will work fine). http://forum.xda-developers.com/show....php?t=2189539
2. Power off the device.
3. Restart in "Download Mode" by holding the "HOME" button, "Volume Down" and "Power" all at the same time (for about 5 seconds).
4. Hit the "Volume Up" to enter download mode.
5. Start the ODIN exe program using admin rights which means right click run as admin. I recommend un-checking Auto Reboot. DO NOT CHECK RE-PARTITION LEAVE UNCHECKED YOU BEEN WARNED (which it already should be). See notes about ODIN below.
6. Connect the device via USB to your computer. Verify the device shows as "Added" in the Message box. If it doesn't show then you need the Samsung USB drivers (just install KIES to get them) which can be found here http://www.samsung.com/us/kies/.
7. Select "PDA" then choose the T210.CWM.6.0.4.5.recovery.tar.zip.
8. Hit "START"
9. Wait for device to restart. Which means wait til odin says OKAY in the white box and the Picture ask you to reset, When the download icon under download updates is full bar, and odin says reset!, just unplug it. then restart by holding the power button down, with vol up, and home, once the samsung picture shows, only hold the up vol button, recovery mode should now be on. Select install zip, and locate the android-armeabi-universal-root-signed.zip)navigate with the up down volume button and power button to select) file, whichever you placed in sd, or exsd,
10. When all is done reboot device, then it will update your android once you turn it on, Now the anoying part, It will be rooted but what google play won't connect?, easy fix , first lets just update all the binaries since its already rooted in supersu app,
Google Store Fix, now first you have to delete your some things, your apps wont dissapear or nothing as long as you dont uinstall them, go to settings<application manager<all<google play store<clear data/cache w.e<force stop<uninstall updates<it will then ask you it will be factory installed<yes, next step, delete your gmail account if you haven't done so, now go to your time settings (Date and Time) and change it to recent date whichever today is , then open play store and it will ask you to sign in again, blah blah google needs sign up and it should be up and running
ALL DONE, remember this is for people who have run into flicker display problems, which is caused by kernal issue with our model, but with stock rom itself we can universally root it through odin with just that simple method which took me like 3 mins lol to do
Grats guys! you have root and cwm now who doesn't want that enjoy and thanks to developers hard work! and my ambition!
this worked for my SM-T210 also. Thanks heaps for this how-to!
Ok my device is already rooted but I would like to install CWM Recovery on it. So I can make a backup. Or does anyone have the stock kernel for it
Sent from my SM-T210 using xda app-developers app
Odin 3.07
Link was busted so I posted a new one for lazy people.
http://www.android.gs/download-odin-3-07/
or something like this??
http://forum.xda-developers.com/attachment.php?attachmentid=1168421&d=1341114315
drolgnir said:
Link was busted so I posted a new one for lazy people.
http://www.android.gs/download-odin-3-07/
or something like this??
http://forum.xda-developers.com/attachment.php?attachmentid=1168421&d=1341114315
Click to expand...
Click to collapse
But you can also use Odin 3.09.
I'm portant is that you flash always the newest CWM / TWRP or PhilzTouch Version about the new updater scripts.
cspiresucks said:
Ok my device is already rooted but I would like to install CWM Recovery on it. So I can make a backup. Or does anyone have the stock kernel for it
Sent from my SM-T210 using xda app-developers app
Click to expand...
Click to collapse
Your best option is to get CWM sknce it will be your original backup instead of a Rom created from another device.
SM-T2105?
Hello,
I came here beacause of a shorcut link given by @gr8nole and another member (I forgot sorry).
But my English must be to bad, i read and re-read, still don't find the answer...
I have the G Tab 3 kids model, SM-T2105.
@bierma32 says: "Important is that you flash always the newest CWM / TWRP or PhilzTouch Version"
Could you tell me wich one is the best, CMW or TWRP, plz? (the last I can find for T210 is CMW-6.0.4.9 and/or TWRP-2.8.2.0)
More important, do you know where I can find the zip of a rooted stock rom, including that 'kids' stuff? (SM-T2105). Or will I not loose the stock rom? Is there no wipe? Sorry, I don't understand.
I want to root, because of lack of space, and the rest.. but I don't want to loose that..
And the most important, "last but not least", I could not find the zip " android-armeabi-universal-root-signed.zip", so can you help me please, putting a mirror or so? Or could it work only with flashing a SuperSU zip? Not so easy, right?
As you maybe can read, I am a newbie in Android rooting. Or is there another way to do?
Thanks for reply.