CM9 RC1 is not ready yet. At least for me, all it would do is play the nice boot screen animation for 10 minutes. I had to re-install the .30 update (my tablet noow behaved as if is was out of the box) and then re-install CM recovery then re-root. What a disappointment, but I will wait - I honestly believe it will be worth the wait. I had trouble initially because I had tried using the upgraded CM recovery Touchscreen but it would not proceed with any update - i thought it was the file but after trying a different one - same result. I re-flashed the recovery and re-rooted, then used that CM version which updated me with the sad result mentioned above.
Good luck everyone - I hope it works for you.
Took a deep breath
Well I tried it again and it worked - I had not followed the exact procedure before and that will teach me. I followed the correct procedure this time and it worked like a charm. People let me share what I found was very important: Always clear the cache/wipe as instructed - this is what caused me much worry and anguish - I thought for sure I had killed my beautiful tablet.
The instructions clearly state that when you are upgrading from CM9x to CM9y it's probably OK not to clear the Cache and/or Factory wipe the tablet - but this was not an upgrade it was a first install so those steps are vital. I was stuck on my boot animation screen because something remained from the previous install (non CM) which was incompatible. If you have any doubts about the instructions then don't proceed - but once I realized what I had left out I knew I had to try it again.
Related
Hi All,
I'm probably one of the few here who is still using HoneyComb instead of ICS on my Xoom. I've been on 3.2.4 for some time now, and started getting the 3.2.6 update notification which I blew off until the other day when I said screw it, I'll update and go through the trouble of re-rooting, etc.
However, I attempted to use Solarnz's universal root method which I've used numerous times before and never had an issue with until now. So after pushing the recovery.img via Fastboot, everything appears to have been completed just fine, except when I reboot into recovery I get the damn android with an error.
I've tried pushing a few versions of recovery and each time it seems to work just fine, but again on reboot, I can't get into recovery like it never got pushed or somehow has been erased. I can even revert back to 3.2.2 and update to 3.2.4 and root and re-install clockwork no problem. But I keep getting that damn update notification every 5 mins, and I'm sick of it, hence why I bothered to update in the first place.
I know most people have by-passed this altogether by jumping to ICS, but I've had too many issues with the beta ICS versions out there (WIFI handoffs and disconnects mostly) and need to reliable daily driver vice ICS goodness (fortunately I have a GNex for that).
Anyway, since I hadn't seen much on this, I decided to post and see if its just me, or if this really is an issue?
I can probably go old skool and use the manual root method of pushing the SU files via ADB, but something isn't right here, and I wanted to get some feedback.
Thanks
DANOinSD said:
Hi All,
I'm probably one of the few here who is still using HoneyComb instead of ICS on my Xoom. I've been on 3.2.4 for some time now, and started getting the 3.2.6 update notification which I blew off until the other day when I said screw it, I'll update and go through the trouble of re-rooting, etc.
However, I attempted to use Solarnz's universal root method which I've used numerous times before and never had an issue with until now. So after pushing the recovery.img via Fastboot, everything appears to have been completed just fine, except when I reboot into recovery I get the damn android with an error.
I've tried pushing a few versions of recovery and each time it seems to work just fine, but again on reboot, I can't get into recovery like it never got pushed or somehow has been erased. I can even revert back to 3.2.2 and update to 3.2.4 and root and re-install clockwork no problem. But I keep getting that damn update notification every 5 mins, and I'm sick of it, hence why I bothered to update in the first place.
I know most people have by-passed this altogether by jumping to ICS, but I've had too many issues with the beta ICS versions out there (WIFI handoffs and disconnects mostly) and need to reliable daily driver vice ICS goodness (fortunately I have a GNex for that).
Anyway, since I hadn't seen much on this, I decided to post and see if its just me, or if this really is an issue?
I can probably go old skool and use the manual root method of pushing the SU files via ADB, but something isn't right here, and I wanted to get some feedback.
Thanks
Click to expand...
Click to collapse
Depending on what ROM your flashing if your trying to do the update from OTA then you have to have a 100% no bloatware removed rom, my suggestion is to download the one @ motodev and then flash 3.1 and update all the way to ICS (if wanted) otherwise I believe that when you get the (!) in recovery you can press once pwr+up fast (don't hold) and it will display the recovery window with the error message that's preventing you from upgrading.
after flashing the recovery, did you reboot into android and then into recovery? if yes, don't!
you have to reboot into recovery right after flashing the recovery.
Hi All,
Thanks for the feedback, I finally got recovery pushed and booted, along with root on 3.2.6.
As llama points out you must reboot into recovery upon rebooting from fastboot. I don’t believe this was a requirement previously. But once I did that, all was fine.
I’ve done this a thousand times before and even in my old notes I couldn’t find any reference to booting into recovery immediately after pushing the recovery.img. Is this something new with this update or has it always been this way? Call me crazy, but I can’t ever recall scrambling to catch the reboot and get into recovery before re-launching Android. I always rebooted in Android and made sure it actually loaded to ensure something didn’t get hosed, then I would reboot into recovery and flash the root zip.
DANOinSD said:
Is this something new with this update or has it always been this way?
Click to expand...
Click to collapse
as far as I know, this is a 'feature' introduced with every ota-update. To my knowledge: get a xoom from a store and flash recovery right away-> everything is good; have the xoom install an ota-update and flash recovery afterwards -> do it this way
I am having a really weird issue I'm hoping someone can help me out with. I was on 4.1.2 Clean ROM which was working great. I wanted to move to 4.3 Clean ROM (8.1 Core Edition). I did the upgrade and then flashed my modem to ML1 both via TWRP.
The ROM setup fine and ran great. However the first time I did a reboot, the phone gets stuck at the Samsung Galaxy S3 logo and never goes anywhere. I left it sit there for 30 minutes and it was hard locked. Only a battery pull would reset it. Through numerous reboots/pulls, the same thing would happen. I tried wiping Dalvik and Cache in TWRP and fixing permissions, to no avail. Reinstalling Clean ROM 8.1 via TWRP without formatting data did not fix the issue either. The only way to get my phone back up and running was a complete wipe and reinstalling from scratch. Then as soon as I reboot the first time, the issue comes back. I've tested this on a clean install - letting the phone go through the initial setup process but not installing or updating any apps - and it still happens.
So I moved on to try AllianceROM build 22, also a 4.3 build and wiped to do a clean install. No matter what options I choose in the setup, the same problem happens. Interestingly in AllianceROM I always get a acore process has failed error on the first boot.
Then I went to download the Knox-free rooted version of stock 4.3 available from Scott's website. I have the same issue with this. Also a wipe with clean install.
It's obvious there is something my phone doesn't like about moving from 4.1.2 to 4.3. In total, I have probably installed three different ROM's about 20 times now after the past couple days.
I've searched about this problem extensively and the only thing I found is a thread for the AT&T S3 that talks about this exact issue, and using Odin to go to stock 4.3 and loading a custom ROM to fix the issue. But I am under the impression that a 100% stock 4.3 will lock my bootloader.
What I plan to do next is use Odin to flash a stock 4.1.2, then go through the process of moving to a custom 4.3 ROM again.
If anyone knows of a tar'd version of 4.3 that won't lock my bootloader, I would be grateful!
If anyone knows of a different way to fix my problem, I would be grateful for that too!
Well I think I can declare victory. My phone is running Clean Rom 8.1 CE and has survived a reboot after every app install for a total of 15 so far.
As it turns out, I think being on TWRP 2.5 and trying to upgrade to Android 4.3 was the issue. Before I went the route of flashing a stock 4.1.2 release, I thought to check if my version of TWRP was the latest, and it was not. I flashed TWRP 2.7, and did a complete wipe and clean install of Clean Rom 8.1 CE, and it's running like a champ.
I know, I know...the install guide on most every ROM says to use the latest version of your recovery - until now I thought that was a "recommendation" or "best practice" and not a hard requirement. Turns out, at least for me, that it is very much a hard requirement. In reading the release notes for TWRP 2.6 and 2.7, they both appear to implement things specifically for Android 4.3 or 4.4.
Hopefully this info helps someone who may be having the same issue.
Hello XDA!
I have some questions about my n8010. It is a tablet that I bought in Greece, in case that is necessary to know, and has an interesting background. It started late May. The tablet was unrooted and without any mods whatsoever. I was running the latest Jelly Bean update and had A TON of lag. I had replaced TouchWiz Launcher with Nova and a different gallery and music app with still a lot of lag. So I decided to flash CM11 since it would be lighter for the tablet. After some research I followed the root guide from Zedomax and everything was fine. I had root and so I proceeded doing a backup. This where everything got weird. The backup started but was stuck for long periods of time. After some time being stuck in a screen I decided I should force restart. After the Galaxy Note 10.1 logo appeared it just hanged there without booting into Jelly Bean. I checked recovery and download mode and they where all working fine so I flashed TWRP. It worked and so I took a backup and proceeded installing CM11. I had it already in my SD. I had followed the instructions in the XDA thread that said about removing a line to make it work on the n8010. The flash went great and after factory resetting I rebooted the tablet and everything was OK. At the first boot WiFi wouldn't work but after a reboot it was. The only thing that wasn't working was the video recording. It is a deal-breaker as I use it a lot. I had to switch ROMs. I tried CM10.2 and it still wouldn't. Same goes for Revolt. At lat I switched to a TouchWiz based ROM. Specifically Hyperdrive RLS8. Video was working so I stayed there. I was noticing that since I flashed CM11 my tablet showed up as an n8013 which was very weird but since these ROMs where designed for the n8013 I thought it was normal.
One ROM also had the front facing camera able to record. Upon further inspection I found that Download Mode had my tablet as an n8010 but with the flash count 0 and the status official! Now, I'm either super lucky or the completely opposite! It also says official under About Device! Fast forward a few months and I am now in a situation where the tablet lags once again like crazy. I uninstalled a couple of apps and also installed lighter alternatives and it's somewhat bearable. I was reading the Official OmniROM thread and saw that others also had issues, most of which had the new KitKat bootloader that I don't have, with YouTube and the Video Recording. The latest nightlies are said to have a fix. So I am thinking of installing OmniROM since I am lagging a lot and I would like Screen Mirroring to the Chromecast. My only concern is that I will either brick the tablet or the camcorder won't work. Many people have bricked their Notes and can't go back without the Samsung Service. Most have the new KitKat bootloader which I don't and I'm happy about. My tablet is in a weird situation, what should I do? Anybody else experiencing these issues? Any advice is appreciated!
Thanks in advance,
Chris
Edit: Forgot to say that I flashed Carbon ROM in September and I got a status 7 while flashing with PhilzCWM that I had installed in order to flash Hyperdrive. I had to flash back to Hyperdrive as it wouldn't boot after the status 7. It probably happened because it didn't have SE Linux support. If I do anything I'll flash the latest TWRP.
chrismin13 said:
Hello XDA!
I have some questions about my n8010. It is a tablet that I bought in Greece, in case that is necessary to know, and has an interesting background. It started late May. The tablet was unrooted and without any mods whatsoever. I was running the latest Jelly Bean update and had A TON of lag. I had replaced TouchWiz Launcher with Nova and a different gallery and music app with still a lot of lag. So I decided to flash CM11 since it would be lighter for the tablet. After some research I followed the root guide from Zedomax and everything was fine. I had root and so I proceeded doing a backup. This where everything got weird. The backup started but was stuck for long periods of time. After some time being stuck in a screen I decided I should force restart. After the Galaxy Note 10.1 logo appeared it just hanged there without booting into Jelly Bean. I checked recovery and download mode and they where all working fine so I flashed TWRP. It worked and so I took a backup and proceeded installing CM11. I had it already in my SD. I had followed the instructions in the XDA thread that said about removing a line to make it work on the n8010. The flash went great and after factory resetting I rebooted the tablet and everything was OK. At the first boot WiFi wouldn't work but after a reboot it was. The only thing that wasn't working was the video recording. It is a deal-breaker as I use it a lot. I had to switch ROMs. I tried CM10.2 and it still wouldn't. Same goes for Revolt. At lat I switched to a TouchWiz based ROM. Specifically Hyperdrive RLS8. Video was working so I stayed there. I was noticing that since I flashed CM11 my tablet showed up as an n8013 which was very weird but since these ROMs where designed for the n8013 I thought it was normal.
One ROM also had the front facing camera able to record. Upon further inspection I found that Download Mode had my tablet as an n8010 but with the flash count 0 and the status official! Now, I'm either super lucky or the completely opposite! It also says official under About Device! Fast forward a few months and I am now in a situation where the tablet lags once again like crazy. I uninstalled a couple of apps and also installed lighter alternatives and it's somewhat bearable. I was reading the Official OmniROM thread and saw that others also had issues, most of which had the new KitKat bootloader that I don't have, with YouTube and the Video Recording. The latest nightlies are said to have a fix. So I am thinking of installing OmniROM since I am lagging a lot and I would like Screen Mirroring to the Chromecast. My only concern is that I will either brick the tablet or the camcorder won't work. Many people have bricked their Notes and can't go back without the Samsung Service. Most have the new KitKat bootloader which I don't and I'm happy about. My tablet is in a weird situation, what should I do? Anybody else experiencing these issues? Any advice is appreciated!
Thanks in advance,
Chris
Edit: Forgot to say that I flashed Carbon ROM in September and I got a status 7 while flashing with PhilzCWM that I had installed in order to flash Hyperdrive. I had to flash back to Hyperdrive as it wouldn't boot after the status 7. It probably happened because it didn't have SE Linux support. If I do anything I'll flash the latest TWRP.
Click to expand...
Click to collapse
I would have fixed the original lag issues first. I would get it back to factory stock 100 percent, once back to factory I would do A factory reset and start all over. Get the system running stock as it should then reinstall apps one at a time. if it can't run stock for whatever reason other roms not going to fix the problem.
at least with factory stock you know what should be working. Instead of guessing if the problem is part of the new ROM
shaun298 said:
I would have fixed the original lag issues first. I would get it back to factory stock 100 percent, once back to factory I would do A factory reset and start all over. Get the system running stock as it should then reinstall apps one at a time. if it can't run stock for whatever reason other roms not going to fix the problem.
at least with factory stock you know what should be working. Instead of guessing if the problem is part of the new ROM
Click to expand...
Click to collapse
Thanks for the response!
Good idea! I was thinking of going back to stock and repeating everything. It should fix all my issues. It's too bad that I don't have a working stock backup and I will have to flash through Odin. The reason that I am not doing this is because I am afraid of making it even worse from the official status state that I have in Download Mode and my device is an n8013 under About Device. A flash back to stock through Odin would probably flash most of the system parts which would be kinda dangerous. But on the other hand that would mean that I could give it a brand new try with better luck possibly! It's not that TouchWiz ROMs don't work, it's AOSP that doesn't. I played a lot with Hyperdrive and seems like it's doing better from the lag prospective. But that's only gonna last 15 days. I am sure! So, I'll have your response in mind! Might try it out when I have some free time. Unfortunately, that will probably be Christmas.
Thanks,
Chris
Going back to stock is good advice.Should certainly fix the video problem which you said was important.
Phil789 said:
Going back to stock is good advice.Should certainly fix the video problem which you said was important.
Click to expand...
Click to collapse
I don't have any video playback issues. It's just the camcorder that doesn't work in AOSP ROMs.
Yes.My use of the word "video" should have been "video recording".
The time has come!
Hello everyone, happy holidays!
The time has come that I follow your instructions. I've done my research and here's how I'll do it. Do you agree? Do you have any other suggestions?
Take full backups with my current configuration (Hyperdrive RLS8, PhilzCWM)
Factory reset the device and clean it up so that there is a lot of space
Install Samsung Drivers
Flash Stock Greek 4.1.2 Frimware (N8010XXUCMK2_N8010OXXCMK2_HOME.tar.md5) through ODIN v3 1.85
Let it boot up and do a factory reset from stock recovery
Flash TWRP 2.8.1.0 for the GT-N8010 (openrecovery-twrp-2.8.1.0-gt-n8010) (I chose this version since it has the most downloads)
Make a full backup once again
Flash Omni ROM 4.4.4 (omni-4.4.4-20141222-n801x-NIGHTLY)
Flash SuperSU (UPDATE-SuperSU-v2.40)
Flash PA GApps (pa_gapps-modular-mini-4.4.4-20141214-signed.zip)
Factory reset
REBOOT!
Check everything (Video, model, download mode, bugs, etc.)
REPORT!
If everything goes correctly I believe I should be OK! Hope my issues will be over since the tablet is slow once again. Kinda scared, so that's why I'm asking you. Will I be (mostly) brick safe? Hope so!
Thank you very much for your support,
Chris
P.S.: Should I root before leaving stock? I mean through TWRP.
chrismin13 said:
Hello everyone, happy holidays!
The time has come that I follow your instructions. I've done my research and here's how I'll do it. Do you agree? Do you have any other suggestions?
Take full backups with my current configuration (Hyperdrive RLS8, PhilzCWM)
Factory reset the device and clean it up so that there is a lot of space
Install Samsung Drivers
Flash Stock Greek 4.1.2 Frimware (N8010XXUCMK2_N8010OXXCMK2_HOME.tar.md5) through ODIN v3 1.85
Let it boot up and do a factory reset from stock recovery
Flash TWRP 2.8.1.0 for the GT-N8010 (openrecovery-twrp-2.8.1.0-gt-n8010) (I chose this version since it has the most downloads)
Make a full backup once again
Flash Omni ROM 4.4.4 (omni-4.4.4-20141222-n801x-NIGHTLY)
Flash SuperSU (UPDATE-SuperSU-v2.40)
Flash PA GApps (pa_gapps-modular-mini-4.4.4-20141214-signed.zip)
Factory reset
REBOOT!
Check everything (Video, model, download mode, bugs, etc.)
REPORT!
If everything goes correctly I believe I should be OK! Hope my issues will be over since the tablet is slow once again. Kinda scared, so that's why I'm asking you. Will I be (mostly) brick safe? Hope so!
Thank you very much for your support,
Chris
P.S.: Should I root before leaving stock? I mean through TWRP.
Click to expand...
Click to collapse
I did it! It worked. Everything went OK but:
- Flash count is 0 and status official
- Back camera records in slow-mo
- Chromecast mirroring does not work
However:
-My device is an N8010
-I use the front camera instead
-Mirroring was not really needed
-LAG IS HISTORY!!! [emoji50] [emoji2] [emoji2] [emoji2]
I am so impressed by the performance, still doesn't best my nexus 4 with KK 4.4.4 but it's a GIGANTIC IMPROVEMENT! Veeery happy! Thank you for your support, I wouldn't be here without you!
Merry Christmas and happy holidays!
Chris.[emoji2]
Brief back story goes like this. Working TF300T running JB, was running slow and laggy so it seems a good time to flash something new. I'm no android/linux pro but I have a good base knowledge (you may question this statement later) . Successfully unlocked and flashed CM12 and TWRP. Tablet ran ok, sometimes significant lag, updated to a few different nightlies, then eventually decided to go back to stock. This is where it all went wrong. I followed the instructions here on XDA by d_crossfader. The flash seemed to go as expected, wiped cache/dalvik, rebooted. Loaded up to stock JB but no wifi, rebooted, all went bad. Stuck at the silver ASUS with spinning dots screen.
here's what working at this point.
I can load to fastboot, recovery etc, and have re-installed TWRP, the latest 2.8.1 failed install, but 2.6 is working (since I've read that this rev has issues).
I went back to the CM12.1 ROM I had working and it seems to flash fine but GAPPS fails, gives 'E: error updating binary in zip' for /boot and /recovery.
I think I've exhausted my abilities so it's time to call in people with actual skills.
What should my next move be? I'd be happy with stock or custom ROM's just like to get it back to functioning.
Thanks
Hey Folks,
got some messy Prob's with my old nVidia Shield LTE Tablet.
The Facts:
-KillSwitch not Triggered and it was succesfully Rooted in November 2015, TEGRA-OTA was also Removed (nomoreota)
-worked for Months (beneath one year), only Super-SU penetrated me periodely that it needs to be Updated, but it couldnt be done, it said "not enough Space" after trying to install a newer Version. :silly:
-past Month (January 2017) i decided to do a Factory-Reset, because Girlfriend should get the Shield, thats where the Problem started:
After clicking Factory-Reset, it began to work. After 4 Hours and nothing happening, i decided to Power it Off and start fresh with Installing a clean Stock-ROM and remove the TEGRA-OTA as i done a year before.
But from now on things get messy and to complicated for me.
In the Past i rooted and flashed it with "Shield-RAM", found here on xda.
But this Time it didnt ended with a working Shielt-Tablet. It stucks alwas in a Bootloop, in Recoverymode also as in normally booting the flashed OS.
Confused an disturbed by this, i tried different Recoverys (TWRP 2.8 and 3.0, also a CWM), all with the same Effect: Bootloop
Now i only can acces the Bootmenue which says Bootloader Unlocked.
I dont now what to do from here on and would be very happy and glad, if someone can help me figuring out whats going wrong.
If further Details are needed i will do my best to provide things i forgot here to mention.
With kind regards - ToxicFighter1
Ps.: excusy my bad spelling, bit rusty in flawless english typing:good:
Hi !
There is this thread where you can try to get it back to stock https://forum.xda-developers.com/shield-tablet/general/unofficial-update-original-shield-t3281541
This nice index may help as well
Good luck !
Thanks, but that's not the problem. If I boot into Fastboot / Bootloader, it's totally fine. In fact, I can plug the tablet up to my PC when it's in any state and doesn't experience the issue. It only occurs when I have it plugged into AC. SO far, I've tried 3-4 different cables and power supplies for 2.4A, 2.1A, and 1.2A - all adapters which worked 100% prior to updating.
Suggestions?
OK - Finally fixed it...
I replaced everything as shown above, but ran into the issue again as soon as FlashFire installed the OTA. So, I tried a different way to upgrade and no longer have the issue. Below is what I did...
- Installed 4.4.0 via ADB/fastboot wirhOEM recovery
- Completed initial setup and upgraded to 5.0 via built in system update
- Rebooted
- Booted to bootloader and flashed TWRP recovery
- Booted to TWRP
- Installed SuperSU via sideload
I would have started out applying 5.0 via adb/fastboot, but have yet to see a full image available yet. Used same TWRP and SuperSU as originally used. Just eliminated GlashFire from process. Once I rebooted and everything loaded, plugged into 2.4a power, and it worked without going into boot loop.
Hope this may help someone else - Thanks
Hey Folks,
thx for the few answers, i'll try these Tips out the upcomig Days.
Lot'a Stuff to do atm, bit Busy.
With kind regards - Toxic
xanthrax said:
Hi !
There is this thread where you can try to get it back to stock https://forum.xda-developers.com/shield-tablet/general/unofficial-update-original-shield-t3281541
This nice index may help as well
Good luck !
Click to expand...
Click to collapse
Hey there, and personally Thx for the provided Link.
As announced i did try it, but with no Success.
I'll or explicit the Tablet gets Stuck at Step 17, the Bootsreen doesn't disapear.
Dont know whats Wrong, cause i did all as menitioned in the Post, every ADB/Fastbootstep with Succes-Message, and because Bootloader was already Unlocked, i took the Rooted Image.
But now, im still on Bootscreen, sick
With kind regards!