Trading my iPhone for a One s - HTC One S

I am going to trade my iPhone4s (At&T) for a Htc one s (Tmobile) Ive read that everything should work including 3g What exactly will I have to do to get this to work ? ( I am on AT&T Network)

http://forum.xda-developers.com/showthread.php?t=1734541
Sent from my HTC VLE_U using Tapatalk 2

rumdada said:
I am going to trade my iPhone4s (At&T) for a Htc one s (Tmobile) Ive read that everything should work including 3g What exactly will I have to do to get this to work ? ( I am on AT&T Network)
Click to expand...
Click to collapse
Welcome to freedom!
Sent from my HTC One S using Xparent Cyan Tapatalk 2

LikeaG2root said:
Welcome to freedom!
Sent from my HTC One S using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
lol I concur...
..... -_- glacierguy I think you posted the wrong link keeps taking me back here
Heres proper one: http://forum.xda-developers.com/showthread.php?t=1693491
Just follow instructions pop in the sim card enter unlock number and go!!! Good Luck and Good Choice! (actually since SGS III is out I may upgrade just had this for 1 week too )
To make the instructions simple: (I take no credit for this)
To find your SIM UNLOCK CODE you need:
1) Root
2) Android Terminal Emulator (free from the market)
3) Your IMEI number (dial *#06# on your dialler)
There are 4 steps to the process:
1) Obtain your UN_lock_code from your phone
2) Calculate the key from your IMEI number
3) Subtract (2) from (1)
4) Unlock your phone
Step 1
Obtain your UN_lock_code from your phone as follows:
Open the Terminal Emulator app and type:
su [enter]
strings -n 8 /dev/block/mmcblk0p6 [enter]
It will output several lines of data (including your IMEI number)
One of the lines will be [eg] UN_Lock_code=063312345
Make a note of this number (This is NOT your SIM unlock code)!
Step 2
Make a key from your IMEI number:
a) Write down the last 7 digits of your IMEI number in this format: 1234 567
b) Reverse the 2 blocks: 567 1234
c) Add a 4th digit X: 567 X 1234 where:
X = the sum of the first 3 digits (If the sum is 2 digits, write only the 2nd digit)
[5 + 6 + 7 = 18 in the example above so X = 8]
[if the sum is 3, X = 3]
[if the sum is 17, X = 7]
[if the sum is 25, X = 5] etc.
Using the above IMEI number we get:
567 8 1234 (= the key)
Step 3
Perform a simple sum.
UN_Lock_code [step 1] – key [step 2] = SIM UNLOCK CODE
e.g. 063312345 - 56781234 = 6 531 111
This needs to be an 8-digit number, so add a zero at the beginning if necessary
YOUR SIM UNLOCK CODE IS: 0653 1111
Step 4
Unlock your phone
a) Remove your SIM card (no need to turn off the phone)
b) Insert alternate SIM card
c) When prompted, enter SIM UNLOCK CODE obtained from step 3
d) Reboot when instructed

Related

[S4][Hack][Root] SIM Unlock for FREE

Background:
The HTC Sensation has a sim unlock code on /dev/block/mmcblk0p6.
This was found and exploited months ago by Sensation users.
For the One S, HTC have decided to get a bit sneaky. The code still exists on the same block but they have encrypted the actual SIM unlock code by adding a key generated from the phone’s IMEI number.
This method uses the IMEI number to calculate the key which can then be subtracted to give a working SIM unlock code.
Thanks to contributions from various users, we now have 3 different methods of obtaining your SIM unlock code.
All are tested and confirmed to work on all versions of the HTC One S.
Method 1 (details below) requires no downloads and takes about 5 minutes.
Method 2 uses the first step of method 1 and then a small executable program on a Windows PC to do the calculation.
Method 3 requires the download of a Bash Script but fully automates the procedure.
Note 1: All methods require Root and only work at present for the S4 version.
Note 2: It is possible that the 'strings' command referred to in the text will only work if you have Busybox installed. If you are already using a custom ROM, you will probably have this. If you are on a rooted Stock ROM and cannot execute the strings command, try installing Busybox first.
Any feedback on this issue would be welcomed in the thread.
Note 3: CM10 based ROMS will normally return the correct values for UN_Lock_code, but fail to unlock when a new SIM card is inserted. If you have this problem, revert to a Sense-based ROM (e.g Trickdroid, Venom) for the unlock process. You may return to a CM10 base after the phone is unlocked.
Methods 2 and 3 can be found in Post 2.
METHOD 1
To find your SIM UNLOCK CODE you need:
1) Root
2) Android Terminal Emulator (free from the market)
3) Your IMEI number (dial *#06# on your dialler)
There are 4 steps to the process:
1) Obtain your UN_lock_code from your phone
2) Calculate the key from your IMEI number
3) Subtract (2) from (1)
4) Unlock your phone
Step 1
Obtain your UN_lock_code from your phone as follows:
Open the Terminal Emulator app and type:
su [enter]
strings -n 8 /dev/block/mmcblk0p6 [enter]
It will output several lines of data (including your IMEI number)
One of the lines will be [eg] UN_Lock_code=063312345
Make a note of this number (This is NOT your SIM unlock code)!
Step 2
Make a key from your IMEI number:
a) Write down the last 7 digits of your IMEI number in this format: 1234 567
b) Reverse the 2 blocks: 567 1234
c) Add a 4th digit X: 567 X 1234 where:
X = the sum of the first 3 digits (If the sum is 2 digits, write only the 2nd digit)
[5 + 6 + 7 = 18 in the example above so X = 8]
[if the sum is 3, X = 3]
[if the sum is 17, X = 7]
[if the sum is 25, X = 5] etc.
Using the above IMEI number we get:
567 8 1234 (= the key)
Step 3
Perform a simple sum.
UN_Lock_code [step 1] – key [step 2] = SIM UNLOCK CODE
e.g. 063312345 - 56781234 = 6 531 111
This needs to be an 8-digit number, so add a zero at the beginning if necessary
YOUR SIM UNLOCK CODE IS: 0653 1111
Step 4
Unlock your phone
a) Remove your SIM card (no need to turn off the phone)
b) Insert alternate SIM card
c) When prompted, enter SIM UNLOCK CODE obtained from step 3
d) Reboot when instructed
Please hit the thanks button!
METHOD 2 - Semi Automatic
Windows PC.
For this method follow step (1) from the above post to obtain your UN_Lock code
You can then download this app which will automate the calculation process.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enter your UN_Lock code and the last 7 digits of your IMEI number and press the 'OK' button.
Your SIM Unlock code will be shown in the bottom box.
METHOD 3 - Fully Automatic
a) Download this Bash Script
b) Extract the zip
c) Move the unlock.sh to /system/ (it will not run from the sdcard due to Android restrictions)
d) Open terminal and run:
su <enter>
/system/unlock.sh <enter>
(Or execute the .sh file directly from root explorer)
The SIM Unlock code will be shown in the terminal and also saved to /sdcard/sim_unlock_code.txt
Credits
This is not all my own work!
Several people have contributed to this thread. If you appreciate their work, please hit the thanks button in their posts as well.
Method 1
Thank you to jh787 for this post. He was the first guy to compare the UN_Lock_code to his real (paid-for) sim unlock code.
I just tweaked the idea to find the mysterious X (and provided this guide).
Thanks also to jh787, mycomputerisjunk, rh387 and eneka who provided me with their actual unlock codes.
This allowed me to work out how to calculate the key and validate the method.
Method 2
Many thanks to Josnaro for the code and Wel1973 for the translation (this post).
Method 3
Bash script courtesy of WCCobra in this post
Do I have to go back to stock for this?
Sent from my HTC One S using xda premium
encho said:
Do I have to go back to stock for this?
Click to expand...
Click to collapse
No need - no
Will report back..
Will Be Really Thankful To You If You Do This Properly.
I am Getting a HTC One S From Canada and I would Need to Unlock It After I Get It
Thanks In Advance !!
Also Pressed It !!
I wrote an Easy Guide On My Blog
http://www.freshnewsarea.com/?p=1411
I want to try it so please guide me
Sent from my HTC VLE_U using xda premium
Reading the first post would start, I've sent my details hope it works
Sent from my HTC One S using Tapatalk 2
You want try the same process of Htc Sensation?
ahmadroid said:
I want to try it so please guide me
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
Read the op!
This could be very useful as apparently my phone would support AWS (well, still have to verify but for that I need to unlock it) and my second carrier is AWS.
ascot17 said:
1) The last 7 digits of your IMEI number (type *#06# in dialler to get this)
Click to expand...
Click to collapse
In terminal, it give you the IMEI just the line before the unlock code
Sent from my HTC One S using xda premium
NienorGT said:
In terminal, it give you the IMEI just the line before the unlock code
Click to expand...
Click to collapse
It does indeed!
The numbers are bigger after *#06# though so it is much easier to read!!
ascot17 -
Finally, My phone is unlock...Pop in my brother Att&t sim card and Woolaaa it worked.
KUDO
Just pm the numbers thanks I hope I can be of help
ascot17 said:
(I have posted this in 'General', but nobody seems to be reading in there!)
With a lot of help from jh787, I have been discussing a hack which will give us SIM unlock for free.
I now have a method which I think works for all, but I need a few people to test first.
So, if you:
a) Have already bought an unlock SIM code for your phone OR
b) Want to see if this method will work
Then please read on and send me a pm with your results.
You need:
1) Root
2) Terminal Emulator (free from the market)
3) A spare Micro SIM from another network
Step 1
Obtain your UN_lock_code from your phone as follows:
Open the Terminal Emulator app and type:
su [enter]
strings -n 8 /dev/block/mmcblk0p6 [enter]
It will output several lines of data.
One of the lines will be [eg] UN_Lock_code=063312345
Make a note of this number (This is NOT your SIM unlock code)
Step 2
Send me a pm with:
1) The last 7 digits of your IMEI number (type *#06# in dialler to get this)
2) The UN_Lock_code obtained from step 1 above.
If you have already bought a SIM unlock code and know that it works, please send me that as well. (This will help to confirm if this method works properly).
For anyone who has not yet SIM-unlocked their phone, but is willing to try [1 attempt!], I will generate a SIM unlock code and send it back via pm for you to try. If it works, I will publish the method for all to use.
Thanks in advance for your help!
Click to expand...
Click to collapse
Gonna do this the minute I grab mines. Lol
Sent from ICS device!
It works mine is officially unlocked
Sent from my HTC One S using Tapatalk 2
Can u pls post the method to unlock?
Totòòò said:
Can u pls post the method to unlock?
Click to expand...
Click to collapse
I will do later today.
Just need to write a idiot-proof guide!
ascot17 said:
I will do later today.
Just need to write a idiot-proof guide!
Click to expand...
Click to collapse
Imma need that one lol j/k. Thanks for the hard work though.
Sent from ICS device!
ascot17 said:
I will do later today.
Just need to write a idiot-proof guide!
Click to expand...
Click to collapse
Haha thanks u r great!

[Q] Code in unknown language?

Hello,
I'm working with an secondary bootloader from Huawei "oemsbl.img" for a phone that comes with a locked bootloader, Huawei U8825-1. I was going through the output of strings oemsbl.img, and towards the end, I found this:
Code:
&
/ 1 2 0
" $ : < ! # 9 ;
* %
I'm wondering if it is some code in some language. I wouldn't expect it to be any mainstream language, but it is likely that it takes at least 3 inputs ( Huawei's online unlock code request page requires IMEI, SN and Product ID) and produces one output, probably a 16 character code, the unlock code.
Any suggestions/ideas welcome!
Thanks in advance!

MTK 6577/8377 dual sim, network problem

I have bought chinese MTK 6577/8377, which is dual sim, dual core tablet.
Android 4.0.4
Problem : When I insert two sim cards, it is allowing me to receive or make a call from only 1 sim card, and even if i make a call to another sim its showing that "this number is switch off". And lateron after some minutes even its network is not showing as well.
So, please if anyone knows how to resolve this problem, tell me.
network problem
[email protected] said:
I have bought chinese MTK 6577/8377, which is dual sim, dual core tablet.
Android 4.0.4
Problem : When I insert two sim cards, it is allowing me to receive or make a call from only 1 sim card, and even if i make a call to another sim its showing that "this number is switch off". And lateron after some minutes even its network is not showing as well.
So, please if anyone knows how to resolve this problem, tell me.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1924922&page=2
Change ur imei by this method
1- go to em with this code "* # * # 3646633 # * # *" (just type it on call pad)
2- then follow that path --> CDS info --> Radio info --> Phone1 (for the first imei)
3- at the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (instead of IMEI_1 put your first imei number)
4- hit send command
5-if you done just reboot the phone, if you change the second imei go to step 2 and select "Phone2"
6-and enter the code "AT +EGMR=1,10,"IMEI_2" (instead of IMEI_2 put your second imei number) hit send command
7-reboot
This will work I have checked thanks for original poster
Sure, this will work?
And by entering/changing this IMEI there won't be any problem at all?
And also please send me a link for its firmware also.
If any newer version is available, will be better choice.
Thanks a lot for your help
Sent from my MID using XDA Premium 4 mobile app

How To: Enable LTE without ROOT/FLASH (model: SM-N900W8)

It's been awhile since I was on the forum but thought I would create a quick post for those who wish to enable LTE on the Samsung Galaxy Note 3 (model: SM-N900W8) where LTE has been crippled. I have compiled the following steps and this should get you up and running without having to ROOT your device, install RECOVERY software or FLASH a new modem.
1) Obtain the device IMEI by pressing *#06# on your dial pad and record this number to reference later.
2) Type in *#272*[IMEI Number]# Where [IMEI Number] is the number you recorded in the step above.
3) You will be prompted with a 3 letter "Regional Settings" menu. Cross reference the 3 letter code with the carrier list at the following link: http://www.samsungis.com/Firmwares/SM-N900W8.html. You do so by hovering over the 3 letter code under the "Region" column. If the SIM you wish to use is from one of these carriers and the carrier supports LTE, we're on our way! The above steps are confirmation, do not modify anything yet!
4) Unlock your device using a preferred unlocking method. Myself, I use http://www.cellunlocker.net which charges $32.99 US for a Samsung Galaxy Note 3 unlock code. It's a reliable site with quick turn-around.
5) Once you receive your unlock code, put in the SIM from the carrier you wish to use and enter the unlock code when prompted.
6) Once unlocked, it may reboot and when at the main menu, follow step 2 and 3 above but this time, select your 3 letter carrier code for the carrier SIM you just inserted then click on OK or INSTALL.
The device will go through a boot up sequence but once complete, you will have LTE enabled. If you do not see this, go into your network settings and you should have the option to select GSM/WCDMA/LTE (auto connect).
Hope this helps those of you wishing to enable the crippled LTE band but do not wish to delve into all the technical jargon related to ROOTING, RECOVERY and FLASHING.
Thanks for this.
Thanks
Thank you for sharing this wonderful trick. I was looking for something like this for a long time.
Please be noted that the secret code *#272*[IMEI Number]# does not exist in many recent models.
You can use Phone INFO ★Samsung★ app > Menu > 'Secret Codes' to check if this code does exist.
THIS WILL ERASE YOUR PHONE...
But it works...

[GUIDE] How to get GSM signal back after selecting USA Band in *#*#4636#*#*

Have you ever lose your phone ‘s signal due to accidentally selecting USA BAND in *#*#4636#*#* menu? If yes, this guide is for you. Thanks to @ian.anindya for guidance and clues on how to restore my phone’s signal back.
Requirement:
1. Rooted HTC One E8 phone
2. Knowledge on how to use ADB command
3. Software Qpst, Qxdm and Mztool
4. A cup of coffee
This is how to do it:
1. Download all necessary software here and extract to separate folder.
2. Install Qpst and Qxdm.
3. Enable USB debugging on your phone and connect it to PC. Verify with command
Code:
adb devices
It must show your device ID and must not be offline.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Input command below to activate diagnostic mode
Code:
adb shell
su
If this is the first time you issue the command, check your phone. There is a prompt asking for root permission, grant it. Continue with below command
Code:
echo 1 > /sys/devices/virtual/android_usb/android0/f_diag/on
5. Your PC will detect new hardware and install necessary drivers. If you do not have the drivers, browse to HTC Diag folder which you download together with qpst and qxdm software. If the drivers installation succeed, check your PC device manager and it will show your HTC Diagnostic Interface (in my case COM5, the value can be different on your PC).
Your phone is now ready for the fun part playing with NV items
6. Open QPST configuration from your windows start menu. Go to Ports tab, and then add your HTC Diag com port.
7. We need to backup current NV items in case something goes wrong. Choose start client, software download. On backup tab, select where to store .qcn file and click start and wait until finished. After finished, close QPST program.
8. Open QXDM professional from your windows start menu. Select NV Browser in the drop down list. Since we do not connect our phone yet, the NV list is not editable.
9. Choose option, communications. Select HTC Diag com port in the target port. If succeed now the NV browser window is editable.
Tick Dual SIM if your phone is dual SIM version. Subscription ID field will be activated.
ID 0 is for SIM 1 and ID 1 is for SIM 2.
For this purpose, we will only need to edit NV item 1877, 441, 946 and 2954.
10. SIM 1
Make sure Dual SIM is ticked and Subscription id is 0.
We use Mztool application to define frequency parameters.
Go to Band Preference (NV Value) tab to configure GSM and WCDMA frequency that we want to put in our phone. Choose the frequency that supported by your phone.
Mine is like this
According to the picture,
Box No.1 refers to NV item 1877. Value is 73925504 (remove commas)
Box No.2 refers to NV item 441. Value is 896
Box No.3 refers to NV item 946. Value is 1128
Box No.4 referes to NV item 2954. Value is 0
All values are in Decimal
Now we need to input these values in NV browser window in Qxdm.
NV Item 1877
On column ID, find item 1877. Click Read to read current value. Take note of it, in case something goes wrong. Write the new value 73925504 under input field and click Write. Click Read again to verify.
NV Item 441
On column ID, find item 441. Click Read to read current value. Take note of it, in case something goes wrong. Write the new value 896 under input field. The value is automatically converted in to Hex.
In my case 896 in decimal is the same as 0x380 in Hex. Click Write. Click Read again to verify.
Do not touch the nam value.
NV Item 946
On column ID, find item 946. Click Read to read current value. Take note of it, in case something goes wrong. Write the new value 1128 under input field. The value is automatically converted in to Hex.
In my case 1128 in decimal is the same as 0x468 in Hex. Click Write. Click Read again to verify.
Do not touch the nam value.
NV Item 2954
On column ID, find item 2954. Click Read to read current value. Take note of it, in case something goes wrong. Write the new value 0 under input field and click Write. Click Read again to verify.
Do not touch the nam value.
Up to here, if you reboot your phone, It should get GSM/WCDMA signal on SIM 1 only. Now we are working for SIM 2.
11. SIM 2
Dual SIM is still ticked but this time choose Subscription ID 1
Remember that SIM 2 supports only GSM (no WCDMA). So in Mztool, choose only GSM signal.
Mine is like this
According to the picture,
NV item 1877 value is 2622336
NV item 441 value is 896
NV item 946 value is 40
NV item 2954 value is 0
All values are in Decimal
Do the same procedures as SIM 1.
12. After finished editing NV items, close Qxdm and then we have to close the diagnostic mode.
Wait around 10 seconds and then input command below to deactivate diagnostic mode
Code:
adb shell
su
echo 0 > /sys/devices/virtual/android_usb/android0/f_diag/on
13. Reboot your phone using ADB command
Code:
adb reboot
After rebooting your phone, wait for 1 or 2 minutes and then hopefully you will get the GSM/WCDMA signal.
Later on, I will continue this guide on how to add LTE Band
===Reserved===
Hello,.
first off all im from Indonesia too, from Surabaya,..
Ane komen pake bahasa inggris aja ya soalnya ini forum internasional
I had that issue too, try to factory reset about several time but still no clue,...
i sent my device to service center, about 1 month and when my device back, its updated from 4.4.2 to 5.0.2, but my sim 1 slot still no signal, its ridiculous how htc tech guy work, they not test my device after update
i wanna follow your guide,. is that work on lolipop?
thanks for advice
Yes, it works on lolypop 5.0.2. Root your device first using latest supersu, flash from twrp recovery.
stuntgp said:
Yes, it works on lolypop 5.0.2. Root your device first using latest supersu, flash from twrp recovery.
Click to expand...
Click to collapse
Yes i'm gonna try to root it first, newbie about it, so many reading about "how to" :laugh:
wish me luck,.. im gonna inform you and maybe need your advice if meet any trouble,.. :laugh:
after reading all night, try and error your guide on second night, yeahhhh finally my sim 1 signal HTC E8 (m8sd - Indonesia) goes ON again, and normal capturing network Indosat, and Simpati (Indonesian Provider) and look working good on HSDPA and 3G ,...
BTW your value on MZtools is different when im genereate, but i am follow your value (because i know we are from same country),..
HTC Service in Indonesia cannot fix this, THEY JUST UPGRADE ROM FROM 4.4.2 TO 5.02 I DONT KNOW WHY THEY ARE NOT TESTING MY SIGNAL FIRST BEFORE SEND BACK MY DEVICE,....
HAHAHAH THX A LOT FOR MADE THIS GUIDE,..... its really reliable guide and easy to follow (i am noob )...
bugs182 said:
after reading all night, try and error your guide on second night, yeahhhh finally my sim 1 signal HTC E8 (m8sd - Indonesia) goes ON again, and normal capturing network Indosat, and Simpati (Indonesian Provider) and look working good on HSDPA and 3G ,...
BTW your value on MZtools is different when im genereate, but i am follow your value (because i know we are from same country),..
HTC Service in Indonesia cannot fix this, THEY JUST UPGRADE ROM FROM 4.4.2 TO 5.02 I DONT KNOW WHY THEY ARE NOT TESTING MY SIGNAL FIRST BEFORE SEND BACK MY DEVICE,....
HAHAHAH THX A LOT FOR MADE THIS GUIDE,..... its really reliable guide and easy to follow (i am noob )...
Click to expand...
Click to collapse
Glad to hear that... Now I am trying to inject LTE band, especially for Band 3 and Band 8 which is supported in Indonesia.
Thanks bro
This thread solved my problem after 1,5 months)
Good job
I'm from indonesia too
Malang exactly
Thanks for @ian.anindya for show me this thread and remoted my pc using team viewer to unbrick my phone
Sorry for bad english
Sent from my HTC One_E8 dual sim using XDA Free mobile app
network Roaming not working after this nv restore
hi there,
thanks a lot for putting up these recovery steps..they were really helpful..but only one thing is that i'm still unable to get a signal while roaming..
do you have any solution for the same..or atleast if i can get a backup of qcn file from stock untouched htc e8 ...that should help..
Jude85 said:
hi there,
thanks a lot for putting up these recovery steps..they were really helpful..but only one thing is that i'm still unable to get a signal while roaming..
do you have any solution for the same..or atleast if i can get a backup of qcn file from stock untouched htc e8 ...that should help..
Click to expand...
Click to collapse
I have not tried roam with other network, but have you checked frequency band of your destination network? and compare with the one in your NV items list?
stuntgp said:
I have not tried roam with other network, but have you checked frequency band of your destination network? and compare with the one in your NV items list?
Click to expand...
Click to collapse
Hi, this is more about a national roaming within india and i dont think the bands will vary in such case...and to be more clear i had searched the bands listed for E8 dual sim on htc site and added them on the mz tool. i believe there is some other nv item that needs an edit to enable the roaming, would be of great help if you could suggest reg it.
Install Superuser "The su binary is out of date."
stuntgp said:
Yes, it works on lolypop 5.0.2. Root your device first using latest supersu, flash from twrp recovery.
Click to expand...
Click to collapse
I am having difficulty in rooting my phone (HTC One E8 Dual Sim) completely, as I get error message "The Superuser binary (su) must be updated. Please choose an installation method. Recovery mode installation is recommended for HTC devices." Options are --> Cancel/ Recovery Install. When I choose Recovery Install, I get another screen which states "There was an error installing Superuser. Please send a log of the error to the developer."
I used TWRP 2.8.7.0 to flash recovery through ADB and installed superuser.zip obtained from clockworkmod site which I guess is the latest version of SU.
I request for your technical expertise to help m e out as I need to perform lot of troubleshooting steps further to rectify the issue with USA Band.
Thank you.
Jude85 said:
Hi, this is more about a national roaming within india and i dont think the bands will vary in such case...and to be more clear i had searched the bands listed for E8 dual sim on htc site and added them on the mz tool. i believe there is some other nv item that needs an edit to enable the roaming, would be of great help if you could suggest reg it.
Click to expand...
Click to collapse
Hi ,
could you pls post the NV items used ,
I'm from India too , but i couldnt get CDMA signal after chaging NV items .
Now im able to use GSM only in slot 2 .
in Slot 1 couldnt reconize cdma/gsm .
---------- Post added at 05:12 AM ---------- Previous post was at 05:08 AM ----------
stuntgp said:
I have not tried roam with other network, but have you checked frequency band of your destination network? and compare with the one in your NV items list?
Click to expand...
Click to collapse
Hi ,
could you pls post the NV items used ,
I'm from India too , but i couldnt get CDMA signal after chaging NV items .
Now im able to use GSM only in slot 2 .
in Slot 1 couldnt reconize cdma/gsm .
default qcn /original qcn
Even my phone sim slot one doesnt work. it detects sim number but no n/w. I tired changing the NV items as suggested, still no n/w
I have only 2G n/w in sim slot 2
The moment i reached US, slot one stopped working.
Please suggest some way to enable slot one .
Thanks
rahul01libra said:
Hi ,
could you pls post the NV items used ,
I'm from India too , but i couldnt get CDMA signal after chaging NV items .
Now im able to use GSM only in slot 2 .
in Slot 1 couldnt reconize cdma/gsm .
---------- Post added at 05:12 AM ---------- Previous post was at 05:08 AM ----------
Hi ,
could you pls post the NV items used ,
I'm from India too , but i couldnt get CDMA signal after chaging NV items .
Now im able to use GSM only in slot 2 .
in Slot 1 couldnt reconize cdma/gsm .
Click to expand...
Click to collapse
For people under warranty !
Hey Guys ! I had the same problem in my HTC E8. Gave it to the service centre and got the motherboard replaced after ~25 days.
Just got the phone back . Has a different IMEI number now.
Phone now has Wifi signal issues ( Getting very less signal strength in relative comparison to my other phone ) and it takes about ~15minutes for the data to turn ON.
Hence the phone is back to the service centre .
can be refurbished device
icyspikey said:
Hey Guys ! I had the same problem in my HTC E8. Gave it to the service centre and got the motherboard replaced after ~25 days.
Just got the phone back . Has a different IMEI number now.
Phone now has Wifi signal issues ( Getting very less signal strength in relative comparison to my other phone ) and it takes about ~15minutes for the data to turn ON.
Hence the phone is back to the service centre .
Click to expand...
Click to collapse
The warranty replacement can be refurbished ones. This is the only reason I did not send my mobile to HTC US warranty claim centre. The Indian purchased mobile also have global warranty , but the claim device can be refurbished. I purchased mine just 3 month back for full price and dont want to receive refubished unit
So still working on my second sim slot, hopefully if the first sim slot works in India once I reach , I will be very happy . Atleast i dont have to fight with HTC for warranty replacement .
Anyways i will never buy another HTC .
NV Items for Indian bands used in HTC ONE E8
SIM 1
1877 : 82314112
0441 : 896
0946 : 1256
2954 : 0
SIM 2
1877 : 2622336
0441 : 896
0946 : 40
2954 : 0
Atlast my both sim s working gr8 .
Thank you Anindya for such a great post ...............:good::good::good::good::good::good::good::good:
---------- Post added at 12:29 PM ---------- Previous post was at 12:25 PM ----------
VERY big Thank you:good::good::good::good::good::good::good::good::good::good::good::good:
d
can see both band USA and Cellular(800 Mhz)
rahul01libra said:
SIM 1
1877 : 82314112
0441 : 896
0946 : 1256
2954 : 0
SIM 2
1877 : 2622336
0441 : 896
0946 : 40
2954 : 0
Atlast my both sim s working gr8 .
Thank you Anindya for such a great post ...............:good::good::good::good::good::good::good::good:
---------- Post added at 12:29 PM ---------- Previous post was at 12:25 PM ----------
VERY big Thank you:good::good::good::good::good::good::good::good::good::good::good::good:
d
Click to expand...
Click to collapse
Thanks a lot for response, Now with your NV values, i can see both bands USA and Cellular (800 MHz) from *#*#4636#*#*
Atleast it has come back to original setting , even though i still dont have n/w in sim slot 1
With my experiance ..... pls follow the below ,,,,
Put the CDMA in SIM lot 1 and GSM in sim slot 2
1 . Got to *#*#4636#*#* and selct radio bands to Cellular (800 MHz) only ,,,,
2 .. and keep the all type of signalings like WCDMA/GSM/CDMA/EVODO/LTE auto ......
u will get sifnal in both sims.................
keep rocking.......................:good::good::good::good::good:
slot one is tmobile gsm
I am using T-Mobile gsm in slot one . I think wcdma or 3g gsm should work onnslot one . Correct me if I am wrong
Airtel 2g/3g used to work in slot one when I was in India
I will be happy even if 2g works . I have kept the settings as you have mentioned

Categories

Resources