Related
Guys, look that...it seems to be nice...I installed and im still testing...Some users said this app helps to increase the battery life in almost 25%....I liked the UI also, is very very nice...
Im going to test...
Share your results....
http://www.appbrain.com/app/cpu-tuner-(rooted-phones)/ch.amana.android.cputuner
u know which frequency to set
dennka said:
u know which frequency to set
Click to expand...
Click to collapse
My kernel does not allow me to change the frequency....
Need to change...By the way...I notice the phone become a quiet slow with this app...
same here, I cannot change settings, however, I do not find apps running slower or the whole sys response got worse
There is no way a cpu tweak can save you anywhere near 25% ...
The screen uses about 80-95% of the battery even with a 1.2ghz overclock cpu doesn't make near that much of a difference...
Sent from my SAMSUNG-SGH-I897 using XDA App
It's funny because I thought the screen was a new technology super battery-saver lol and it's clearly not
However, the Wave who have 0.7 smaller screen but the same technology have a battery like 3x times better.
the difference? the os. I'm pretty sure the problem comes from the Android and nothing else.
I would second android being the culprit....considering most of us are running leaked 2.2 battery management has not been fully implemented. I had great battery life on jh3 and jh7...... but I would never go back to eclair to get better battery life. The epic is starting to get.official froyo and I read that Canada should start seeing froyo this week......all we need is for att to get on the ball and Samsung to release their source code
Sent from my SAMSUNG-GT-I9000 using XDA App
hey guys,
does anyone have an older version of this app. It used to work great for me, but with the latest updates it has not performed as well.
thanks.
Actually the 1.0.1 version is really good. Here is a guide how to use it:
linux-tipps.blogspot.com/2010/12/make-your-android-power-efficient-in.html
*** Adrian *** said:
My kernel does not allow me to change the frequency....
Need to change...By the way...I notice the phone become a quiet slow with this app...
Click to expand...
Click to collapse
change the settings(current governor: conservative into PERFORMANCE
Sent from my SAMSUNG-SGH-I897 using XDA App
I haven't tried it yet. But if I understand what it is by the name I don't think it will help that much. Android OS already changes frequency based upon usage. You can see these percentages in the Android System Information app. For example, mine reads as follows:
1000.0 MHz 3.19%
800.0 MHz 6.49%
400.0 MHz 5.5%
200.0 MHz 9.58%
100.0 MHz 75.13%
Hi,
I'm quite new to Android and forum, but within 15minutes I S-offed and rooted my phone. I still don't know how to overclock the desire s. I used "search" but I found nothing. Could anyone help me and either write me an intruction what to do step-by-step or provide me with appropriate topic? I'll be greatful!
TheLittleNick said:
Hi,
I'm quite new to Android and forum, but within 15minutes I S-offed and rooted my phone. I still don't know how to overclock the desire s. I used "search" but I found nothing. Could anyone help me and either write me an intruction what to do step-by-step or provide me with appropriate topic? I'll be greatful!
Click to expand...
Click to collapse
You'll need a combination of a custom KERNEL (that supports O/C) and a custom ROM (some come with an O/C daemon built in)
time for some reading.
Ok, so one more question just in case. May I use any ROM with any kernel or I have to match ROM to kernel (or opposite)?
Generally I would say custom roms come with the most suitable kernel.
The easiest way to overclock is to simply download an app from the market that will o/c your cpu.
Peace
Sent from my HTC Desire S
If your new to all this are you really sure you want to start overclocking?
Sent from my HTC Pyramid using XDA App
ben_pyett said:
You'll need a combination of a custom KERNEL (that supports O/C) and a custom ROM (some come with an O/C daemon built in)
time for some reading.
Click to expand...
Click to collapse
Although I'd also as that unless you'r e intending on playing games then the desire s should be fast enough without over clocking as ultimately that will reduce battery life.even the sense 3 rooms when configured and optimised correctly don't lag at normal operating speeds
Swyped from HTC Desire S using XDA Premium
You're still on stock ROM right?
If so, install this kernel from recovery and SetCPU once done. OC away.
If i want to overclock my desire s, does it effect my phone?
nartz said:
If i want to overclock my desire s, does it effect my phone?
Click to expand...
Click to collapse
Yes, it would go a little faster
Seriously tho, it might run a little hotter, for a shorter length of time, and be slightly less stable - all depending on how much you overclock it, what settings you use, etc.
Try downloading an app from the market that will overclock your cpu and see what happens.
Sent from my HTC Desire S
And NEVER max the oc setting. Some kernels allow up to 1.7ghz but your phone would be fried in a week and be incredibly unstable. Can't recommend going past 1.2ghz if you want your phone to last til your next upgrade date. For the most part though, oc is unnecessary on this phone.
Sent from my HTC Desire S using xda premium
wnp_79 said:
For the most part though, oc is unnecessary on this phone.
Click to expand...
Click to collapse
Gotta agree there. Stock CPU settings are more than adequate for any use.
Sent from my HTC Desire S
chris5s said:
Yes, it would go a little faster
Seriously tho, it might run a little hotter, for a shorter length of time, and be slightly less stable - all depending on how much you overclock it, what settings you use, etc.
Try downloading an app from the market that will overclock your cpu and see what happens.
Sent from my HTC Desire S
Click to expand...
Click to collapse
I just read somewhere in other forum, if I overclock my phone, I will have problem on my phone.
Maybe because of the cpu overheat or what?
Basically, yes.
Why not use the phone as it is, and see how you like it? If you do decide to overclock, do it in small increments. Honestly, I find it fast enough at normal speeds, playing games, browsing, etc.
Peace
Sent from my HTC Desire S
chris5s said:
Basically, yes.
Why not use the phone as it is, and see how you like it? If you do decide to overclock, do it in small increments. Honestly, I find it fast enough at normal speeds, playing games, browsing, etc.
Peace
Sent from my HTC Desire S
Click to expand...
Click to collapse
+1 to you. 1Ghz already fast enough. No lagging at all like some other phone.
v(^_^)
I was quite interested in this overclocking buisness. I overcloked my phne to 1.7ghz, used it for a while and it froze twice, requiring a reboot.
There was definitely a speed incresas, but 1ghz on lbc mod is already plenty smooth!
Now I've set up setcpu profiles to have myphone only overclocked at 1.2ghz when its chargingand I'm using it. But also a profile to limit the temp at 41degrees to 825-245mhz.
But when its unplugged, u have left it on default at 1024-245mhz on demand. Great battery life compromised with great speed.
Sent from my HTC Desire S using XDA Premium App
Maybe you'll need a voltage bump at 1.7GHz. But even if it's stable, it will definitely be hotter. Not good for long term.
1.1-1.2GHz should be stable for daily use.
I am of course referring to this script:
http://forum.xda-developers.com/showthread.php?t=991276
I tried to implement it about two months ago, and it did not work for me. Phone went into a loop at boot. I just gave up.
Anyone?
It would be really nice to find out if we can benefit from this as well.
benyben123 said:
I am of course referring to this script:
http://forum.xda-developers.com/showthread.php?t=991276
I tried to implement it about two months ago, and it did not work for me. Phone went into a loop at boot. I just gave up.
Anyone?
It would be really nice to find out if we can benefit from this as well.
Click to expand...
Click to collapse
Instead of starting a new Thread why not post in the one you linked to. I am sure the ones there that tested it would be able to help. Any time you post in an old thread it will bring (bump) it to the top and btw it is still an active thread.
GTWalling said:
Instead of starting a new Thread why not post in the one you linked to. I am sure the ones there that tested it would be able to help. Any time you post in an old thread it will bring (bump) it to the top and btw it is still an active thread.
Click to expand...
Click to collapse
Thanks.
I posted it here because I am asking about LG G2x users. In the script thread, you won't find questions about specific devices so much. It's more on how to install, what does it do, and so on.
I tried it didn't bootloop or anything but I didn't notice any difference in performance etc.
I just started using the V6 supercharger about a month and a half ago on my LG G2x and have loved it. before this i was running minfree to change presets but I like V6 because it has lots of options for those that don't fully understand what the presets do. If you use a low setting you probably wont notice much of a difference and I must say that I notice the biggest difference when I am overclocked and using V6 at the same time. If I'm not overclocked and using V6 I don't notice much. same thing when I am just overclocked without V6, not much of a diff. Both together seem to be great.
Also to those with boot loop problems - how long are you leaving your phone before you decide it has looped...a few times i have just had to walk away from my phone for 15-20 minutes just so I'm not tempted to pull the battery and every time i have left it alone i come back to everything running fast, smooth and stable.
Currently running HellFire Phoenix 1.9
placebo effect.
Sent from my LG-P999 using xda premium
Yeah, "I get a performance gain when I'm overclocked with the script, but get no performance gain without OC and the script" so that would be the placebo effect.
However, V6 SuperCharger does work very well at setting the right OOM groupings and also makes everything a lot smoother for me. I'm underclocked to 750mhz and get the performance of the stock 1ghz.
d12unk13astard said:
placebo effect.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Eh, maybe, if you're on a lower end phone, I think the effect would be more noticeable as well, it would also be noticed if you ran alot of apps at once since multi tasking will take up more RAM than for someone like me who listens to music and browses the forum and maybe uses maps if I don't feel like paying attention to where I am at on the bus.
Sent from my LG-P999 using xda premium
Волк said:
Eh, maybe, if you're on a lower end phone, I think the effect would be more noticeable as well, it would also be noticed if you ran alot of apps at once since multi tasking will take up more RAM than for someone like me who listens to music and browses the forum and maybe uses maps if I don't feel like paying attention to where I am at on the bus.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
All true, but in hypocrats case it is complete placebo since he is using the lower setting.
He says he notices a performance gain with overclocking and the script, but none without overclocking and the script. Performance gain was all overclock.
But the higher settings work well, the script makes everything smooth, even for me at 750mhz, and will fix OOM groupings.
Maybe, but my battery life is better in standby and I have less issues with the stock internet browser. Below 100mb free and it became very buggy for me. I would love it if everyone shared what rom they are using and their settings. I am using close to the recommended settings.I am using New Clip (weapon based) and #5 unleaded.
I want to share my setup with you guys for getting good battery life which lasts the day without making you compromise on the features. The primary things I've seen on the forums so far has a lot of involved setup and frankly by the time you get it perfect, you will flash a new ROM and have to re-do a lot of it and so on, overall it's not the worth the hassle.
This is usually what my days look like and I manage to last the entire day:
I keep wifi and GPS on always, regardless of whether I'm using it or not.
Get a fair bit of calls because I live away from family so they all call a lot (I have a massive family, so we are talking about 5-6 hrs of talking everyday).
I like to read news from news republic and I'm subscribed to a lot of stuff there so I go through like 2000+ articles in a given day.
XDA like every few hrs (damn ICS!).
Text messages are also flowing throughout the day with the woman being on the other side of the country and all (100+ a day?).
I have facebook on push (not an addict but active enough to mention)
My gmail, school and exchange are all on push for email so they I see a fair bit there
The setup is VERY easy to setup and replicate. It doesn't require you to lose out on features or use your phone at an anorexic level either. You don't need a task manager or watch your processor non-stop either.
So without further delay, here we go:
Pick a ROM
I'm using Seanster_GBaxe EX v1.5.1 from the T-Mobile section, you can find it here.
Get faux's kernel
The reason for this particular one is because it's given the best results when it comes to undervolting and overclocking without SOD. You can find the kernel here.
Get System Tuner
This is available on market. There are alternatives but for this post, I will be making all the references from this app.
Get the AGPS patch from crypted
This isn't for battery directly but it does get locks VERY fast and you waste less clock cycles getting the signal. Less clock cycles wasted, more battery saved. The patch is available here.
I personally use the v3.0 Google CWM Build (scroll down his post and you will see it)
Get the V6 SUPERCHARGER from zeppelinrox
This is available here. Why the beta one? It works fine.
Okay, at this point you can pretty much store these things together in a neat little folder on your SD card because it makes a perfect library. So let's get started, I'll assume that we are starting from scratch. The order for everything will be as follows:
Get into recovery and install your ROM
This I shouldn't have to explain, the instructions you can find on the ROM thread.
Install the kernel
Same with this, read the kernel thread.
Install the GPS patch
Same with this as well
Boot into ROM
Hmm.... hopefully you can manage this
Restore all your backups and apps, accounts and whatever else
Using titanium here is always good
Install System Tuner
Okay, let's get started. Although faux has done an amazing job with the kernel, there's always the personal bias that goes into making things so his balanced settings might not reflect yours (nor mine but you will be tweak even those soon).
Inside System Tuner, go to CPU:
The first you thing you should choose is whether you want to keep the 1.72 GHz OC or not. I kept it but if you want to get even more you can lower to stock 1.56 GHz or go even lower, your choice. Once you set the max, set the min to 384 MHz. Set it once and you don't need to do it again after. Leave the governer to ONDEMAND.
Now go to the Voltage tab:
Be careful here, this can crash you if you go too far. What we do here is globally undervolt, you can do that by hitting the -12.5 mV button over and over. I use -75 mV (press the button 6 times, for those bad at math). Keep in mind that all chips are NOT THE SAME!!! -75 mV might be too much for you or you might even be able to get to -100 mV, find out by doing it.
Now go back to the CPU tab and hit Boot Settings:
Hit Screen-off behavior:
Governor - No changes
Max frequency - 384 MHz (push doesn't lag at all still so don't worry about notifications)
Max frequency/in call - 384 MHz (yes, calls don't require full blast, they work fine even under 500 MHz)
Now go back
Hit Governors behavior:
Sampling rate - Unchanged (faux has it done perfect)
Up-threshold - 75 (what's this? This means that the CPU will scale to higher frequencies when the load is above 75%)
Power-save Bias - 70 (what's this? This means that the CPU will be "biased" towards lower frequencies when load is below 70%)
Setting the Power-save Bias higher than the Up-threshold is obviously stupid so make sure you did it right.
Now go back
At the bottom, there is a whole bunch of tweaks:
Hit Re-apply CPU settings, choose init.d script (you can choose boot too but init.d works 100% of the time)
Hit Boost app loading, choose init.d
Hit Clear cache, choose init.d
Now go back
Find the Startups section and disable whatever you don't want running at boot (this is purely a personal thing).
Install V6 script
His instructions are very good so I'll assume that you have gotten it installed. Once you have it running, choose option 9, the 1000 HP one. Reboot. Run script again, make sure you've got it at 100% supercharged. Done. Reboot just to be sure again.
All done! Now, I know that was lengthy but here's the awesome part. Make a titanium full backup of System Tuner and you NEVER have to do that again for ANY ROM as long as you use the same kernel!! The script is unfortunately the only thing you have to re-apply, probably that has a quick setup too but I'm new to it so I can't give you shortcuts on it.
Hope you have luck with this and it works for you. I promise nothing and if you break your phone please don't come crying to me because you chose to do this yourself. It works for me so I shared it!! Any suggestions are welcome of course.
Note: NO task manager required!! I will modify this for cm7 if needed.
nice job. thanks a lot!
You're using the rc6.1 correct?
Sent from my SAMSUNG-SGH-I727 using xda premium
Thanks for the detailed write-up.
Are you in an LTE market? A full day on LTE would be pretty awesome.
For the screen-off behavior, do you think one can get away with using the smartass governor instead?
I'm using the RC6, tad older I guess.
Sent from my SGH-T989 using Tapatalk
jedah said:
Thanks for the detailed write-up.
Are you in an LTE market? A full day on LTE would be pretty awesome.
For the screen-off behavior, do you think one can get away with using the smartass governor instead?
Click to expand...
Click to collapse
I'm not in LTE area :-(... Would be nice because that's why I got the phone but then I had to move so can't say anything about LTE.
As for smartass, what kernel are you using? Smartass works very similar to the modified ondemand settings that I set up so it wouldn't make a difference as far as I forsee.
Sent from my SGH-T989 using Tapatalk
I tried this, will post results later. Thanks for the great tutorial
If you could post screen shots of your CPU Spy that would be helpful! How well does your phone do on going into deep sleep? On average from what to what time does yours last you? I'm just skeptical about setting the screen off behavior cause that usually prevents the phone from going to Deep Sleep.
Sent from my SAMSUNG-SGH-I727 using xda premium
DANIEL133337 said:
If you could post screen shots of your CPU Spy that would be helpful! How well does your phone do on going into deep sleep? On average from what to what time does yours last you? I'm just skeptical about setting the screen off behavior cause that usually prevents the phone from going to Deep Sleep.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
You're right about the deep sleep, don't let it go into deep sleep. It lasts me 12 hours normally. I'll get you screenshots when I get a chance.
Sent from my SGH-T989 using Tapatalk
Mine goes into deep sleep with screen off behavior setup.
Sent from my SGH-T989 using XDA App
kr3w1337 said:
You're right about the deep sleep, don't let it go into deep sleep. It lasts me 12 hours normally. I'll get you screenshots when I get a chance.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Dont you think the phone waste alot more battery though when it doesn't go into deep sleep? I've also found that WiFi tends to create a nasty wake lock. My set up is Sky ICS Speed with Faux Clock 1.296 ghz max -384 mhz min. -37.5 u/v LTE on all day, extremely heavy usage. 12 hour battery life on average.
Sent from my SAMSUNG-SGH-I727 using xda premium
InstigatorX said:
Mine goes into deep sleep with screen off behavior setup.
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
Which kernel are you using?
kr3w1337 said:
Which kernel are you using?
Click to expand...
Click to collapse
Using faux kernel with foxstar rom.
Sent from my SGH-I727 using XDA App
DANIEL133337 said:
Dont you think the phone waste alot more battery though when it doesn't go into deep sleep? I've also found that WiFi tends to create a nasty wake lock. My set up is Sky ICS Speed with Faux Clock 1.296 ghz max -384 mhz min. -37.5 u/v LTE on all day, extremely heavy usage. 12 hour battery life on average.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
From what I've noticed with the faux kernel, it goes into deep sleep after some time on it's own, regardless of the screen-off behavior. I haven't opened up the source to check it out for a better explanation but that's something I doubt is worth exploring since the performance doesn't take any hit.
I haven't chosen to underclock to 1.2 but it should do better than the 12 hrs I get now if I did do that. I have a tendency to start GTA 3 and start playing whenever I get bored so that's why I went OC rather than under. For others looking strictly to use the phone with minimal gaming, this would be a good option. LTE isn't available in my area so I can't test with it but the WiFi radio uses just as much battery as the LTE, if not more I have a feeling.
Trying eugene's kernel from today to see if the lionheart governor does better than the current setup. I will know in a couple of days because every ROM flash needs a couple of charge cycles before it accurately shows battery status.
InstigatorX said:
Using faux kernel with foxstar rom.
Sent from my SGH-I727 using XDA App
Click to expand...
Click to collapse
Do you get any SOD? Everything working okay? Is the setup different than what I've got up there? Would like to know and try it out, can update the OP accordingly.
Just finished with eugene's kernel and the results were pretty disappointing. Looks like the second core is always kept on regardless, faux's kernel turns the second core offline until usage demands need it.
If anyone knows how to tweak eugene's to stop that from happening, do share.
kr3w1337 said:
Just finished with eugene's kernel and the results were pretty disappointing. Looks like the second core is always kept on regardless, faux's kernel turns the second core offline until usage demands need it.
If anyone knows how to tweak eugene's to stop that from happening, do share.
Click to expand...
Click to collapse
Can you clue me location of his latest ROM? Or is it somewhere in the Macnut thread on TMO side of the fence?
InstigatorX said:
Can you clue me location of his latest ROM? Or is it somewhere in the Macnut thread on TMO side of the fence?
Click to expand...
Click to collapse
Using darkside ROM at the moment with the faux kernel, had the Eugene kernel but I noticed that the second core is kept alive regardless of usage and that wasn't helping so I changed back to faux.
Sent from my SGH-T989 using Tapatalk
thanks for the awesome write up!
Did it last night, and lasted the day without a sweat! However, my min frequency wont stick? I have it set to stock frequency 1.5, using faux kernal, and my voltages arent as low as yours (im not a crazy user like you.. maybe an hour of talking a day, lots of texts and emails tho), but i cannot get my min frequency of 3xx to stay. Suggestions?
Thanks!
edit- running stockMod v1.0
im sorry, i have a hard time believing you talk for 6 hours and scroll thry 2000 pages of web and get a day of use. I myself could get about 1.5 days on battery strictly by staying home, connected to wifi all day and barely talking on the phone. i would like to see a screenshot of battery usage at the end of your day
So i just got a deal for a cheap Sensation and decided to give it a try. After a few days, i really like the Sense UI + ICS but find the battery is pretty bad compare to my GS2.
The Sensation drains about 8% overnight while the gs2 drains 2-3% overnight, both with nothing on. When playing music (doing nothing else,screen off) the battery drains a whopping 5%/h. while i dont think the gs2 would drain more than 1%/h just playing music. I thought the battery life on both phones should be more or less the same given the same specs and battery capacity (1650 vs 1520).
To be more specific, my ROM is ARHD 6.5.0 ICS, i havent installed any new app yet, i have the follwing widgets on : email, messages, weather, contact, task, music. I'm not sure if the drainage is coming from those widgets.
One more question, is there any way to quickly change brightness ? (like sliding the status bar as with the gs2). Auto brightness may be draining more battery but going through setting->display->brightness every single time is painful.
Any tips would be appreciated. Thank you.
download just defence i got a good result of it underclock your phone a bit to
Is there a kernel that allows undervolting which is fully compatible with ARHD6 ICS ?
dullahan263 said:
Is there a kernel that allows undervolting which is fully compatible with ARHD6 ICS ?
Click to expand...
Click to collapse
something like this should do im not sure havent seen any other kernel for sensetion 3.32 base UV'ed
Juice Defender is a good option to test out, even using default settings it's pretty good with helping battery usage/drain.
Otherwise ARHD is using Sebastian's kernel at this point and you have the choice of using the 1.2 or OC'd 1.5 Ghz speed when flashing. If you're concerned you can use the 1.2 version or flash the 1.5 and just set the clock speed using something like SetCPU, available here on XDA, or System Tuner, from the Market.
As far as I know right now, the kernels are not allowing UV because the official source hasn't been released yet. Once source is released/obtained then things like UV and other deeper optimizations can be done by the awesome kernel developers here.
torumsie said:
Juice Defender is a good option to test out, even using default settings it's pretty good with helping battery usage/drain.
Otherwise ARHD is using Sebastian's kernel at this point and you have the choice of using the 1.2 or OC'd 1.5 Ghz speed when flashing. If you're concerned you can use the 1.2 version or flash the 1.5 and just set the clock speed using something like SetCPU, available here on XDA, or System Tuner, from the Market.
As far as I know right now, the kernels are not allowing UV because the official source hasn't been released yet. Once source is released/obtained then things like UV and other deeper optimizations can be done by the awesome kernel developers here.
Click to expand...
Click to collapse
or you use a funny app called antutu cpu master and just UV yourself
Alienator9191 said:
or you use a funny app called antutu cpu master and just UV yourself
Click to expand...
Click to collapse
Actually didn't realize it would do it, awesome and thank you!
I normally perform my UVing through System Tuner Pro, but the options are not available at this time, I just checked, so I didn't realize another app that also allowed UV would still allow it. See what I get for assuming...... lol
https://market.android.com/details?id=com.antutu.CpuMasterFree&feature=search_result
So you have finally made your choice in choosing between HTC Sensation and Samsung Galaxy S II? Found yourself having to recharge your new Android device every 8hours? You’re not alone. Some users reported to have a poor battery performance for their Android phones. Older device ranging from HTC Desire, Motorola Droid, Samsung Galaxy S, Sony Ericsson Xperia X10 to the latest dual-core Android phones; LG Optimus 2x, Motorla Atrix, HTC Sensation, and Samsung Galaxy S II, are not sparred with complains of poor battery life. However, Android itself is not a power hogger, or call it battery juice sucker if you like. Many users were able to get their Android device up and running in a single charge up to 3 days(gosh I missed the good old Nokia 3310-era).There are many factors in leading to poor battery life. The very main reasons are the display and unnecessarily turned on features, which some users don’t have a clue in turning it off. If you are happened to be one of the Android users not happy of the current battery performance, or you simply just want to improve the extra mileage of your Android device’s battery performance, here are some tips in improving the battery life of your Android phone.
Vacances Vietnam-
Agence de voyage Vietnam-
Jonque Huong Hai
I'm actually looking at it right now and the others and thinking about getting the Smart Profiles app by AnTuTu, my Volume Control+ Pro has been giving me problems recently.
torumsie said:
I'm actually looking at it right now and the others and thinking about getting the Smart Profiles app by AnTuTu, my Volume Control+ Pro has been giving me problems recently.
Click to expand...
Click to collapse
because its for sound boost only, idk what u seek but it wont handle your volume into time but just boost it, i also noticed it doesnt work on sense but will on nonsense roms
Battery problems absolutely solved with "3g off" widget, on the market. I don't need anything more than basic phone and sms for hours at a time so I just hit the widget. Takes a few seconds to sync latest mail when it comes back on but less time than that to just find a 4g link. Great when I'm at the ofc where my mail gets pushed to my laptop anyway.
Very useful also in a weak-signal area, stops drain due to signal-search.
Juice Defender is very good for battery life but this solution is even better although the widget does require manual intervention when the screen comes back up. I use both. Possibly JD paid app automates the whole process.
Sent from my LG-P999 using XDA App
ecdy said:
Battery problems absolutely solved with "3g off" widget, on the market. I don't need anything more than basic phone and sms for hours at a time so I just hit the widget. Takes a few seconds to sync latest mail when it comes back on but less time than that to just find a 4g link. Great when I'm at the ofc where my mail gets pushed to my laptop anyway.
Very useful also in a weak-signal area, stops drain due to signal-search.
Juice Defender is very good for battery life but this solution is even better although the widget does require manual intervention when the screen comes back up. I use both. Possibly JD paid app automates the whole process.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
use at JD the data traffic enabler sets it of when u tik it
on again when u tik it then you can set the acc to push when u want it idk if jd does that to i think i did find it once