Related
ok, so a few days ago i was flashing the G2x weapon rom onto my rooted G2x, but while i was in the clockwork mod to flash it it froze on me, i left it like that for an hour or so, but it didnt work, so i took the battery out. now whenever i turn it on, it loads the LG screen, then nothing, the screen stays turned on, but its black, ive tried to boot it into recovery mode but that does not work either. What should i do?
Did you do One-Click NVFlash>? if u used Rom Manager you probably fake flashed and thats why its not working for you. You should use NVflash followt he steps and boot up into recover and restore a back up. GOod Luck
thanks ill try that
ed116 said:
Did you do One-Click NVFlash>? if u used Rom Manager you probably fake flashed and thats why its not working for you. You should use NVflash followt he steps and boot up into recover and restore a back up. GOod Luck
Click to expand...
Click to collapse
+1
Also try holding the vol down+pwr for longer than usual might just be being difficult
Making bad decision's one at a time.
so when i get into nvflash it says usb not found,
i did all the steps, and had it all done, but it dosent find my phone
Did u install the drivers correctly? That's probably the problem if it says USB is not found. I believe there is a video about how to install the drivers. Ill look for the video now
Sent from my LG-P999 using xda premium
Sorry for the double post, and here is a video link
http://www.youtube.com/watch?v=nmzk92rV6k4&feature=youtube_gdata_player
I used Linux to nvflash mine so I haven't used this method but I'm sure a lot of other people have.
Sent from my LG-P999 using xda premium
moeahmad1995 said:
Sorry for the double post, and here is a video link
http://www.youtube.com/watch?v=nmzk92rV6k4&feature=youtube_gdata_player
I used Linux to nvflash mine so I haven't used this method but I'm sure a lot of other people have.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1054492
This was written for Windows users, I followed this one myself, pretty straight-forward, and "idiot proof". (If anything can be truly idiot proof. Cynical, who, me?)
so, ive flashed my phone through nvflash and i got clockwork mod up and running, but whenever i select the file to flash that is on my SD card, it says no files found. i even tried going to my backup on the clockwork file, and nothing.
reki94 said:
so, ive flashed my phone through nvflash and i got clockwork mod up and running, but whenever i select the file to flash that is on my SD card, it says no files found. i even tried going to my backup on the clockwork file, and nothing.
Click to expand...
Click to collapse
Since changing to Nvflash, did you download the rom you want to install and transfer it to the phone from your computer. Using Rom Manager it may not have left a copy on your phone.
If you cant hook up the SD card to the computer, get an external SD card and make sure u've installed clockwordmod with external sd, hook it up to a laptop with an SD card slot, and put it in , then take the mini sd and pop it in your phone, then boot up and that should do it good luck! atleast now your 1 step closer to recovering your phone
Ughh hate,seeing this happen...hope u flashed nV..all the best
Sent from my LG-P999 using xda premium
Hope you didn't brick your phone.
No you did not brick your phone. Rom manager downloads the file to sdcard/clockworkmod/downloads. Look there for the file. Only if you download a rom from your browser does it go to externalsdcard/downloads
Sent from my LG-P999 using xda premium
I went from SAUROM, flashed ICS Build 17 twice, and after "SUCCESSFULL" message, it boots up but without any cell coverage network and it doesnt even recogonise Internal storage. It shows only 1.8Gb memory and not the internal files.
I CAN boot into recovery, and in that when i choose FLASH ZIP FROM SD CARD, i can see EVERYTHING!!! all my files,folders etc are there.... ive flashed the same ROM like 10 times now, same problem.
Also, i tried ODIN 1 click , but my phone doesnt get recogonised in Download Mode.
so im stuck with the this ROM without any cell coverage, without any memory, nothing.
WHAT TO DO..please help me out!!!
PS: i have tried ODIN 1 (phone doesnt get recogonised)
i have also wiped data,cache,dalvik etc etc. done everything!!!
neo_31591 said:
I went from SAUROM, flashed ICS Build 17 twice, and after "SUCCESSFULL" message, it boots up but without any cell coverage network and it doesnt even recogonise Internal storage. It shows only 1.8Gb memory and not the internal files.
I CAN boot into recovery, and in that when i choose FLASH ZIP FROM SD CARD, i can see EVERYTHING!!! all my files,folders etc are there.... ive flashed the same ROM like 10 times now, same problem.
Also, i tried ODIN 1 click , but my phone doesnt get recogonised in Download Mode.
so im stuck with the this ROM without any cell coverage, without any memory, nothing.
WHAT TO DO..please help me out!!!
PS: i have tried ODIN 1 (phone doesnt get recogonised)
i have also wiped data,cache,dalvik etc etc. done everything!!!
Click to expand...
Click to collapse
Did you install the Nexus S drivers from the CM9 OP? that should get your phone recognized in odin.
Did you try going into CWM, factory reset, format system, wipe cache and dalvik cache and then flashing a new ROM?
Sent from my SGH-I897 using XDA App
Sounds like you need to use Heimdall one click back to stock gingerbread. I usually use that when I mess up flashing ics ROMs and odin doesn't want to recognize my phone. Read more about Heimdall
Sent from my SGH-I897 using XDA
+1 Heimdall
Edit: forget what I said on this post. Just read about Heimdall
Sent from my SGH-I897 using XDA
That information is completly incorrect....
Oh. Apologies then.
Sent from my SGH-I897 using XDA
Hey thanks. .Il gve Heimdall a shot nd report back. .Thanks
panda_mode said:
Sounds like you need to use Heimdall one click back to stock gingerbread. I usually use that when I mess up flashing ics ROMs and odin doesn't want to recognize my phone. Read more about Heimdall
Sent from my SGH-I897 using XDA
Click to expand...
Click to collapse
Could you please point me in the right direction...which Heimdall r u talkin about exactly...am really sorry but i dont have access to a computer for much time and searching through my old nokia is a pain in the ....
Use Apex ROM Heimdall package. It has links to heimdall website. It's pretty good ROM too.
Or use SFX-style one-click Heimdall package for SauromKK4.
bravomail said:
Use Apex ROM Heimdall package. It has links to heimdall website. It's pretty good ROM too.
Or use SFX-style one-click Heimdall package for SauromKK4.
Click to expand...
Click to collapse
hey im using Heimdall but still it shows up as unknown device in zadig...
what to do!!!
ive installed drivers from Odin 1 click, still its coming up as unknown device
Install zadig driver and reboot your computer. Make sure your USB cable and computer both funcitonal. I have second computer to test things out.
@Original Poster: I've sent you a Private Message in case you did something weird in installing the zadig driver.
Hope things will go well for you.
ok...so using an external micro sd i flashed icy glitch, and i also flashed the Dark Knight ROM..
same problem...Doesnt recogonise Storage and also no network...im Beginning to think this is a major F*** up....
Hey...could my problem also be the same as "Encryption Unsuccesfull" given here http://forum.xda-developers.com/showthread.php?t=1447303&page=11
even though i never got the same message, but even I cant see the rest of the memory..only 1.8 is present....
Hmmm... Could be a hardware issue then. As for your network, you have to set your phone on the correct APN. It takes forever for my pc to recognize my internal storage or that its connected, but I think that's an issue with some people on ics. Try reinstalling the samsung drivers.
Sent from my SGH-I897 using XDA
Hey...I finally managed to get it recognised ...went back to stock 2.2 through Odin 1 click...then to 2.3.5 and then flashed docs ics.. ...everything's back to normal now...
Thanks a lot for your help guys...really...thanks
For those who have been following this thread, the moral is this:
You're only bricked if you literally have a dead phone that doesn't respond at all. Can't turn on, doesn't vibrate, doesn't show signs of charging, doesn't go to DL mode, etc. Even then, if you have the unbrickable mod then you are literally never going to be able to brick your phone, even under circumstances that would normally cause a brick.
Well it bricks, but you run a program that takes advantage of the hardware being wired to be able to load things into the RAM while the phone is off and execute an upgrade from there!
he said he bricked it trying to upgrade to ICS.
is the sticky at the top still the way to unbrick it? i noticed that a couple links were dead in the first post. granted i didn't go through all 17 pages, just wanted to make sure there wasn't anything newer then whats already been posted.
edit: he did say that the screen is showing s/w if that matters
Was it bricked by flashing a o2x rom? I think that may be the hardest brick I have heard of but still fixable. I believe if that is the case than following the sticky should restore the baseband and everything else.
Honestly though I would first try just reflashing CWM via nvflash, boot into recovery and load a stable GB rom. If that works, great.
LurkerRWO said:
Was it bricked by flashing a o2x rom? I think that may be the hardest brick I have heard of but still fixable. I believe if that is the case than following the sticky should restore the baseband and everything else.
Honestly though I would first try just reflashing CWM via nvflash, boot into recovery and load a stable GB rom. If that works, great.
Click to expand...
Click to collapse
he just said things went haywire when trying to flash ICS. i've been messing around with the sticky but can't get anything to work....yet!
im on windows 7 if that matters
and after i boot into recovery the screen is just flashing black. any ideas?
everything i do with flashing it just sits at the prompt saying "flashing" and nothing else happens.
blackbeasst said:
he just said things went haywire when trying to flash ICS. i've been messing around with the sticky but can't get anything to work....yet!
Click to expand...
Click to collapse
You apparently you did not even read the first post. XP only, will not work with Windows 7.
"As many have stated, pushing the v21E_00.kdz via the KDZ_FW_UPD program does work. It's just touchy.
This is a step by step guide to get you back in to working shape.
Note: You MUST do this via a PC running Windows XP. Running Vista/7 in compatibility mode is not going to work, period.
Edit: As an alternative, a virtual environment running XP will do the job. Those steps are up to you."
That's not true. I updated the baseband using win7 on my first try. No need for comparability mode.
Sent from my LG-P999 using XDA App
LurkerRWO said:
That's not true. I updated the baseband using win7 on my first try. No need for comparability mode.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Can confirm that too. Was working fine on 32 bit win7, using the method from the stickies upgrading wind's June baseband.
Sent from my LG-P999 using xda premium
duple and lurker, thanks for the confirmation that it works with 7
when i try and push the kdz i get the dreaded phone not found.
ok im on my xp machine here at work and heres what i got:
Part 1: Download the files you will need below.
V21E_00.kdz
KDZ_FW_UPD_EN
One-Click-G2x-recovery-flasher-06-16.rar
LG USB Drivers G2x
Part 2:
1) Install the LG G2x USB drivers to your WinXP machine.
2) Extract the entire contents of the One-Click recovery in to a folder and keep it handy.
3) Remove the battery from the phone. Hold both volume buttons and plug in the USB cable. If you are asked for a driver, look in the APX folder where you extracted the One-Click recovery archive.
4) Run OneClickRecoveryFlasher.exe and flash the stock recovery. Wait for the process to finish and close all windows and unplug the phone.
no problems with above steps. after that nothing works. when i put the battery back in and turn on thats when i get the flashing black screen, not back to the s/w screen.
5) Put the battery back into the phone and turn it on. You will be back at the S/W Upgrade screen. This is where you want to be! Now plug the USB cable back in to the phone. If everything is up to snuff you should have no driver problems at this point.
6) Extract KDZ_FW_UPD_EN.7z in to a folder. Inside is a msxml.msi. You need to run and install this first!
7) Run KDZ_FW_UPD.exe.. Leave the type set to CDMA and the phone mode set to DIAG. DO NOT CLICK ON "Read phone information"
8) Click the folder icon and load the V21E_00.kdz
9) Click launch software update (and pray!)
ok just for craps and giggles i tried booting into recovery and actually got the box with arrow and android! but it then reboots back to the lg screen and then flashing black screen
WOOT! finally able to get into CWM recovery!
is all that needs to be done now is install a stable rom?
double WOOT! back up and running. time to test the functionality of if though!
edit: can't find the sim and no service.
blackbeasst said:
double WOOT! back up and running. time to test the functionality of if though!
Click to expand...
Click to collapse
Delighted to hear that. So, another confirmation of the "old" folks stating it's 99.9% un-brickable.
Sent from my LG-P999 using xda premium
DupleX01 said:
Delighted to hear that. So, another confirmation of the "old" folks stating it's 99.9% un-brickable.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
and im a tard. sim was inserted bass akwards
blackbeasst said:
and im a tard. sim was inserted bass akwards
Click to expand...
Click to collapse
Congrats man.
Sent from my LG-P999
wifi seems to be flaky. keeps scanning and dropping work and home network
also it appears that the market wasn't on that version of the rom. is that a quick fix?
Now you have the recovery and baseband sorted, start from scratch and do a full wipe(including system internal/external SD). Then flash a stable ROM Weapon/EB to make sure everything is good. Just my 2 cents
Sent from my LG-P999 using xda premium
DupleX01 said:
Now you have the recovery and baseband sorted, start from scratch and do a full wipe(including system internal/external SD). Then flash a stable ROM Weapon/EB to make sure everything is good. Just my 2 cents
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
im was lucky to get it up and running, so im still a flashing noob! but what is considered a stable rom for this phone?
i grabbed one from cyanmod earlier today. i think it was from around 3/13?
blackbeasst said:
im was lucky to get it up and running, so im still a flashing noob! but what is considered a stable rom for this phone?
i grabbed one from cyanmod earlier today. i think it was from around 3/13?
Click to expand...
Click to collapse
You were lucky, indeed!
A CM nightly can be stable too, however I would flash either Weapon or Eagles Blood for a couple of days to have a piece of mind that everything is working cool. The most important would be a proper full wipe (cache, dalvik, system under mounts and storage, battery stats and imho internal and external SD too) too get rid of the previous mess caused by the unsuccessful flash, etc.
Sent from my LG-P999 using xda premium
I tried going back to gingerbread using Heimdall 1 click and it gives me a kernel error and failed. Now phone won't boot past the rogers logo. Any suggestions? No samsung screen. No green battery indicator when plugged in. Heimdall does detect the phone, and I've tried all USB ports and cords at my disposal. I use a mac so no access to odin. This is the first brick I haven't been able to get myself out of. Any help you would be appreciated
I am a gt i9000 owner, but can you get into download mode?
Sent by Santa Clause
If you can get download mode, then flash a gingerbread stock rom, even if it means you will lose root still do it, then flash a new rom of your choice, if you can get into download mode then you haven't got a brick
Sent by Santa Clause
Been bricked more than once...you have?
Embarking on a fresh new ROM without educating oneself can be very frustrating....since your on a Mac..with in the one click you say it reading your phone...can you get to download mode?
Pull battery
Plug in USB to phone
Hold both volume button
Pop battery back in
Do you see...the yellow Android digging?
http://forum.xda-developers.com/showthread.php?t=1293751
bigjoe2675 said:
Been bricked more than once...you have?
Embarking on a fresh new ROM without educating oneself can be very frustrating....since your on a Mac..with in the one click you say it reading your phone...can you get to download mode?
Pull battery
Plug in USB to phone
Hold both volume button
Pop battery back in
Do you see...the yellow Android digging?
Click to expand...
Click to collapse
I can get into download mode.heimdall detects my phone. I tried both qksters and adam outlers 1 click. neither would take. If I upgrade heimdall version (as it tells me its out of date) it wont get through the initial connection to the phone. if I use with out upgrade it continues to fail on kernel download.
This is my second brick (first one was when trying to root it on my mac) First brick was fixed through odin at my work. Unfortunately I don't want to wait till monday to have a functioning phone
teknhard said:
I can get into download mode.heimdall detects my phone. I tried both qksters and adam outlers 1 click. neither would take. If I upgrade heimdall version (as it tells me its out of date) it wont get through the initial connection to the phone. if I use with out upgrade it continues to fail on kernel download.
This is my second brick (first one was when trying to root it on my mac) First brick was fixed through odin at my work. Unfortunately I don't want to wait till monday to have a functioning phone
Click to expand...
Click to collapse
Hummmm..ok
Let's step back here does out prompt you for drivers?
....you might have to make a stop at your office..
Try different USB ports, I used heimdall yesterday to go back to gingerbread (so I could get the boot loaders) and I had the same problem as you, I finally got it to work with a different USB port and even then it kept failing...but I just kept trying and eventually it went through
(Pull battery, place battery back in, hold volume up and down, plug USB in-should put you in download mode...even if you can't see anything on your screen you can still enter download mode)
Sent from my SGH-I997 using XDA
DOesnt prompt me for drivers. It detects my phone and says ready to flash. I see the download mode screen. so its not completey screwed. Just can't get past the rogers logo.. I only have two USB on my macbook.. tried both quite a few times guess i'll mess with it some more. see if I can get it going. Thanks for the tips. ANy others ideas would also be appreciated
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
theROMinator said:
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Funny I just did that yesterday using qkster heimdall after running the ics for the day....no issues utilizing it...so i say it does work...
theROMinator said:
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
bigjoe2675 said:
Funny I just did that yesterday using qkster heimdall after running the ics for the day....no issues utilizing it...so i say it does work...
Click to expand...
Click to collapse
I did not mean to be misleading, as you both have said, either or may work, I simply wanted to share my experience
mg2195 said:
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Sent from my SGH-I997 using Tapatalk 2 Beta-5
mg2195 said:
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Agreed. On my desktop (quad core 6 gb ram, watercooled blablablabl) can't run heimdal nor Odin to save its life.
My netbook (single core atom) took me back from CM9 with Odin like it was nothing.
My 7 year old laptop (running Ubuntu) works great using Heimdal (just run the .jar file as an executable)
theROMinator said:
I did not mean to be misleading, as you both have said, either or may work, I simply wanted to share my experience
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
No ... understood..no worries...there are some many that have never flashed or much less read anything regarding flashing are having so many prob`s...when this ics it's still bring birthed...for the infuse.
Instead of going to the dev section and doing some home work...understanding the basic info....they see ICS and have pictures of Sunday treats....in their mind...having no clue about the current ROM they are on now...Then the questions pop up...from individuals...after wards yelling SOS...But hey it's their phone.
bigjoe2675 said:
No ... understood..no worries...there are some many that have never flashed or much less read anything regarding flashing are having so many prob`s...when this ics it's still bring birthed...for the infuse.
Instead of going to the dev section and doing some home work...understanding the basic info....they see ICS and have pictures of Sunday treats....in their mind...having no clue about the current ROM they are on now...Then the questions pop up...from individuals...after wards yelling SOS...But hey it's their phone.
Click to expand...
Click to collapse
I've flashed lots of roms and never had any issues. Also looked through the forum and know the basics about getting back to stock. I'm no expert, but I have a decent idea what I'm doing. I do appreciate a forum you can ask questions though and have people help out when your stumped. I did what i could from the tools I have at my disposal here, and ran into some problems. I'm not yelling SOS, just asking for some tips as what I have tried hasn't worked. All the same I do appreciate everyones opinions and help they provide. THat's what makes this forum great.
why would you need to heimdall if you are on a rogers infuse? Isn't that for AT&T phones only?
teknhard said:
I've flashed lots of roms and never had any issues. Also looked through the forum and know the basics about getting back to stock. I'm no expert, but I have a decent idea what I'm doing. I do appreciate a forum you can ask questions though and have people help out when your stumped. I did what i could from the tools I have at my disposal here, and ran into some problems. I'm not yelling SOS, just asking for some tips as what I have tried hasn't worked. All the same I do appreciate everyones opinions and help they provide. THat's what makes this forum great.
Click to expand...
Click to collapse
I apologize wasn't directed to you just in general and your correct this forum is great...
Then reflash ics lol
Sent from my SGH-I997 using xda premium
threi_ said:
why would you need to heimdall if you are on a rogers infuse? Isn't that for AT&T phones only?
Click to expand...
Click to collapse
Because I don't have access to a PC for Odin, and the at&t should work to get me out of brick state. I currently can't get past rogers boot screen
GoSooners345 said:
Then reflash ics lol
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I don't have recovery.. otherwise I certainly would have
So I bought my Skyrocket about a year ago. It was rooted and running Embryo 3.0.
I upgraded it to Embryo 5 and even 7.
When upgrading to Embryo 7, my computer wouldn't detect the phone. I ended up deciding that the USB port on the phone was dead. So i just pu the ROM on a SD card and flashed through CWM.
Last week, I got a call and when I tired to answer it the phone froze. Upon reboot the phone got stuck on the Cymbaline logo.
I then decided to try and get it back to stock. I put it into ODIN mode and connected it to my PC. The ODIN software recognized it and i was able to flash it back to ATT stock JB.
Now Windows again fails to recognize the phone. Which is strange to me as I was able to flash through USB with ODIN.
My question is, how can I get a custom ROM such as Embryo 7 which I like a lot, onto the Skyrocket without being able to root the phone?
ByPlease try searching before posting. I found this page using the horrible search on the xda app.
http://forum.xda-developers.com/showthread.php?p=29977559
You may look at vincom's other stickies too, I think you need to get a custom recovery on your phone.
http://forum.xda-developers.com/showthread.php?p=28785461
And if your USB port is shot
http://forum.xda-developers.com/showthread.php?p=34906725
Sent from my HTC Express using xda premium
ctalcant said:
Please try searching before posting. I found this page using the horrible search on the xda app.
http://forum.xda-developers.com/showthread.php?p=29977559
You may look at vincom's other stickies too, I think you need to get a custom recovery on your phone.
http://forum.xda-developers.com/showthread.php?p=28785461
Sent from my HTC Express using xda premium
Click to expand...
Click to collapse
Thanks. But I already found that guide. Its for getting the phone back to stock with a dead USB port.
I've already gotten the phone back to stock, now I need to figure how to get it rooted and how to flash Embryo 7 back onto the phone.
n1helix said:
Thanks. But I already found that guide. Its for getting the phone back to stock with a dead USB port.
I've already gotten the phone back to stock, now I need to figure how to get it rooted and how to flash Embryo 7 back onto the phone.
Click to expand...
Click to collapse
Same way
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
I think embryo 7 has problems with the partitions getting corrupted somehow, so if you wanna be in the same boat again go ahead, but I suggest flashing something else. Does your phone still charge with a broken USB port??
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
holeindalip said:
I think embryo 7 has problems with the partitions getting corrupted somehow, so if you wanna be in the same boat again go ahead, but I suggest flashing something else. Does your phone still charge with a broken USB port??
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
It charges fine. Just when I connect it to Windows I can hear it connect, and a second later it disconnects.
It seems like a software issue though, because ODIN recognized the phone phone in Download mode. And I was able to flash to stock.
Ill have to check out some other ROMs then, I really liked Embryo.
Looks like I can put CWM back on through ODIN and then flash a ROM through CWM.
n1helix said:
It charges fine. Just when I connect it to Windows I can hear it connect, and a second later it disconnects.
It seems like a software issue though, because ODIN recognized the phone phone in Download mode. And I was able to flash to stock.
Ill have to check out some other ROMs then, I really liked Embryo.
Looks like I can put CWM back on through ODIN and then flash a ROM through CWM.
Click to expand...
Click to collapse
Yes you use Odin to flash custom recovery
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
n1helix said:
Looks like I can put CWM back on through ODIN and then flash a ROM through CWM.
Click to expand...
Click to collapse
Of course
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta