hey everyone. i finally got my one x from at&t and now i'm trying to do everything to it before it all gets fixed. i've rooted and now i'm attempting to unlock the bootloader.
the problem is the drivers. if the phone is not in the bootloader, my computer identifies the device as "my htc", however, when it is in the bootloader, it is identified as "android 1.0".
i have already gotten supercid, i just need the identifier token. when i use the command "fastboot oem get_identifier_token" it just says waiting for device. when i put the command in, my hox is in the bootloader.
so can anyone help with my problem? i'm pretty sure it's the drivers, but i can't find them anywhere online, and my computer doesn't automatically look for them.
If you install htc sync which you can get from htc.com you'll get drivers too. Just make sure htc sync is disabled when you use any of the one click tools.
Your phone has to be in fastboot mode, not bootloader. Use the vol up and down to select fastboot, and power button to confirm.
when i installed htc sync, it said the drivers failed to install. is there a direct download to manually install the drivers?
Winters37 said:
when i installed htc sync, it said the drivers failed to install. is there a direct download to manually install the drivers?
Click to expand...
Click to collapse
http://binary100100.googlecode.com/files/HTCDriver3.0.0.007.exe the link i used when i first bought my one x
Related
Ellos All. So I'm attempting to unlock the bootloader on on my Sensation. I'm following the instructions given via htcdev.com, everything was going okay but now I'm in CMD Prompt at the stage where I use the command fastboot oem get_identifier_token, and instead of the line of text that I'm supposed to get, I get <waiting for device> ... Any suggestions? thanks!
Did you follow the instructions? I've also done the HTC unlock method and it's flawless. I revolutionary'd after that but that's besides the point.
Not trying to sound like a douche, but you definately missed something. Maybe you didn't enable USB Debugging.
just do the s-off/rooted thing by this forum :
http://forum.xda-developers.com/showthread.php?t=1192300
and you will succed in 1 time oh and dont forget htc sync need to be on at phone with usb debugging
Yes, I've followed the instructions
I had a similar problem. I simply rebooted the phone (while it said "waiting for device") and all went well after that.
kaustic187 said:
Ellos All. So I'm attempting to unlock the bootloader on on my Sensation. I'm following the instructions given via htcdev.com, everything was going okay but now I'm in CMD Prompt at the stage where I use the command fastboot oem get_identifier_token, and instead of the line of text that I'm supposed to get, I get <waiting for device> ... Any suggestions? thanks!
Click to expand...
Click to collapse
first Enable USB debugging on phone . Boot your phone into bootloader. Connect your phone to pc via usb cable. Phone should read FASTBOOT VIA USB.
Make sure that HTC sync is off . ( Go to task manager, if you see the HTC sync is running, kill it)
Also remove anything else that may attempt to sync when you connect device.
Eg doubletwist, isyncr etc.
i did all necessary stuff according to this tutorial: (windows 7, 64 bit)
http://forum.xda-developers.com/showthread.php?t=1583427
just after typing: fastboot oem get_identifier_token
cmd says: <waiting for device>
and now it just freezes at this point, i don't get any further
anybody got some advice?
garldehildehar said:
i did all necessary stuff according to this tutorial: (windows 7, 64 bit)
http://forum.xda-developers.com/showthread.php?t=1583427
just after typing: fastboot oem get_identifier_token
cmd says: <waiting for device>
and now it just freezes at this point, i don't get any further
anybody got some advice?
Click to expand...
Click to collapse
Sure. This happened to me at first. Try connecting your phone to a different USB port? Did you get a taskbar notification that a device had been connected? (Did you here the little dings? ha)
When cmd says waiting for device, it either means that your phone isn't in fastboot (which I assume it is, since you were following the directions), or that the device isn't connected.
Also, did you install the software package HTC sync? It's a fairly large download, but it might be a necessary one to get the required drivers to connect the phone.
Let me know if this helps.
Make sure you've installed the usb drivers required by selecting the check box for USB in the Extras.
Yep I got this error too and just had to install HTC sync from the HTC website to fix it. Easy peasy
Just use this guy's toolkit. Worked on my U.S one S.
http://forum.xda-developers.com/showthread.php?t=1604677
Sent from my HTC VLE_U using xda premium
well i downloaded this htc-sync stuff you said and everything just works fine
thanks a lot guys!!
I relocked my bootloader and tried running a RUU but it keeps telling me that my phone is not connected. I'm using parallels for mac, I installed the drivers and I notice that when i connect the phone it doesn't say "fastboot usb" but when i push volume down is changes yet it still is unable to detect the phone. I installed the htc drivers but when I connect the phone is shows i dont have the drivers for " HTC Remote NDIS based device"
Could this be because im using parallels instead of a full windows pc?
please help, this is my very first android device and im scared I already ruined it
Yeah parallels is touchy. It works in VMware. Make sure in vm settings the usb device for the phone is set to always available to windows. If it is set to ask then it can lose connection.
Ok, Ill give a try.
I still have another problem. When I try to install the htc drivers, I get an error saying device not found. How am I able to install the drivers now?
I found the best way to get the driver installed is to install HTC sync
Thanks for the replies gunnyman, I have one last problem and hopefully theres a fix. I have a low battery and unable to flash the RUU. Is there a fix?
Is there battery actually low? Just shut down the phone and charge it up.
When I plug in the phone, it boot up on its own into fastboot and it says "fastboot ac". Is it charging?
Jaykelso said:
When I plug in the phone, it boot up on its own into fastboot and it says "fastboot ac". Is it charging?
Click to expand...
Click to collapse
Sorry. No idea. Sounds like it.
Hello xda,
a friend of mine just gave me his HTC Sensation because it isnt running quite a while. The problem is that i haven't had a HTC device ever and I don't really know what to do and what information you need to help me so I'd be happy if u just tell me what information you need and I will try to get them for you.
The Information I got so far is:
- if I want to boot it, it stays at the HTC Logo
- CWM starts with some errors but you can't perform a wipe (just turns off)
- Bootloader starts as well but you can't perform wipe either, nor flash new CWM
- If i connect it with the computer while in fastboot it changes to "fastboot usb" but adb cannot find the device, though i installed first the drivers, lateron htc sync. Windows just calls it "myhtc"
bootloader says:
"PYRAMID PVT SHIP S-OFF RL
HBOOT . 1.27.1100
RADIO - 11.22.3594.07_M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012, 17:33:34"
So what should I try to do or what information will you need.
I would be very happy if u can help me
fnstGoliath said:
Hello xda,
a friend of mine just gave me his HTC Sensation because it isnt running quite a while. The problem is that i haven't had a HTC device ever and I don't really know what to do and what information you need to help me so I'd be happy if u just tell me what information you need and I will try to get them for you.
The Information I got so far is:
- if I want to boot it, it stays at the HTC Logo
- CWM starts with some errors but you can't perform a wipe (just turns off)
- Bootloader starts as well but you can't perform wipe either, nor flash new CWM
- If i connect it with the computer while in fastboot it changes to "fastboot usb" but adb cannot find the device, though i installed first the drivers, lateron htc sync. Windows just calls it "myhtc"
bootloader says:
"PYRAMID PVT SHIP S-OFF RL
HBOOT . 1.27.1100
RADIO - 11.22.3594.07_M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012, 17:33:34"
So what should I try to do or what information will you need.
I would be very happy if u can help me
Click to expand...
Click to collapse
Hi,
Go HERE
Install 4 EXT recovery,using one of the 3 methods available.(probably third)
Then,try to install ARHD ROM.(same guide)
No need to change the firmware.
So I just tried to flash 4 EXT Recovery but it doesn't work..
It finds the zip, ask me whether i want to start the update, i press vol up and "Update is in progres.." appears but nothing more, I'm waiting since 5 minutes and will probably have to power off the phone now.. the same happened when i tried to install cwm so theres something wrong with the bootloader?
What can I do now?
fnstGoliath said:
So I just tried to flash 4 EXT Recovery but it doesn't work..
It finds the zip, ask me whether i want to start the update, i press vol up and "Update is in progres.." appears but nothing more, I'm waiting since 5 minutes and will probably have to power off the phone now.. the same happened when i tried to install cwm so theres something wrong with the bootloader?
What can I do now?
Click to expand...
Click to collapse
Hi,
Maybe you should run a RUU.
Look HERE
I also thought about this but as I said adb doesn't find the device.
Since I never ran a RUU, can I still flash or do I have to get adb to run with the device.
Anyway, I cannot read out the CID of the device so if it is possible, which RUU should I flash?
Thanks for your help
fnstGoliath said:
I also thought about this but as I said adb doesn't find the device.
Since I never ran a RUU, can I still flash or do I have to get adb to run with the device.
Anyway, I cannot read out the CID of the device so if it is possible, which RUU should I flash?
Thanks for your help
Click to expand...
Click to collapse
Hi,
Try installing these windows 7 & 8 drivers (assuming you have a windows 7 or 8 machine)
Reboot your PC and see if your phone is recognized in ADB.
You are s-off,so you do not have to match it 100%
Just get a RUU that is close to your region or carrier.
If you get the wrong one,it is not a problem.
It will just give you an error.
Then,just try another.
)
Well I just installed those drivers but same result as before..
Windows says "MyHTC" and after i write "adb devices" into the cmd window it says "daemon not running. starting it on port 5037. daemon started succesfully. List of devices attached." and the next time i write adb devices it just says "List of devices attached".
Bootloader still says Fastboot USB.
So maybe there's something wrong with my adb?
Well can i flash RUU without adb finding my device or cant I?
fnstGoliath said:
Well I just installed those drivers but same result as before..
Windows says "MyHTC" and after i write "adb devices" into the cmd window it says "daemon not running. starting it on port 5037. daemon started succesfully. List of devices attached." and the next time i write adb devices it just says "List of devices attached".
Bootloader still says Fastboot USB.
So maybe there's something wrong with my adb?
Well can i flash RUU without adb finding my device or cant I?
Click to expand...
Click to collapse
Hi,
Not sure what is happening with your ADB.
Look HERE for help.
In order to run a RUU ,you need to put the bootloader into fastboot,and plug in the USB.
It should show what yours is showing.
So, it should work.
After "List of devices attached" there is no device shown, I didn't leave anything adb shows, so this is still right? Usually it always shows my device ^^
So my adb is probably not running right or it is about my phone
So my next step should be adb showing my device and therefore reinstall android sdk, java, stuff until it might show the phone
or just do something with the phone?
I still think that i cannot run a ruu without any device shown? Didnt really get an answer on this question I guess or I didnt realize it
fnstGoliath said:
After "List of devices attached" there is no device shown, I didn't leave anything adb shows, so this is still right? Usually it always shows my device ^^
So my adb is probably not running right or it is about my phone
So my next step should be adb showing my device and therefore reinstall android sdk, java, stuff until it might show the phone
or just do something with the phone?
I still think that i cannot run a ruu without any device shown? Didnt really get an answer on this question I guess or I didnt realize it
Click to expand...
Click to collapse
Hi,
Just run the RUU.
It will only show error if it does not work.
No big deal,and no damage done.
Just try another one.
if you enable usb debugging might help too
Well.. I just started "RUU_Pyramid_HTC_Europe_1.50.401.1_Radio_10.56.9035.00U_10.14.9035.01_M_release_223042_signed" and everything went fine until installation, no errors at all. Now the installer is stuck at "restarting bootloader" (or something equal, the installation is german) and the phone didnt do anything at all. It's now 15 minutes since the installation started so I probably will try another one but isn't it weird that ther is no error at all?
What should I do if the next RUU does exactly the same?
*edit:
just seeing page 2. How should I enable usb debugging without booting the phone?
*edit2:
second RUU: Same thing, no error but it didnt go further then "Restarting bootloader".
What to do now?
Any further Ideas what I could try?
Puuuush
fnstGoliath said:
Any further Ideas what I could try?
Puuuush
Click to expand...
Click to collapse
Put phone into bootloader then connect to pc and run the RUU
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
The phone was in fastboot usb while running the ruu for sure ..
fnstGoliath said:
The phone was in fastboot usb while running the ruu for sure ..
Click to expand...
Click to collapse
Hi,
Try running a RUU with the same radio (11.22) that you have installed.
You will not damage the phone.
It is not always an exact science with RUU.
Sometimes it is just trial and error.
So it is often that there is no error at all?
I just thought flashing wrong RUU will cause an error and not stopping at restarting bootloader. And anyway the bootloader seems pretty broken since it is not flashing anything at all ^^
Still i gonna try it
fnstGoliath said:
So it is often that there is no error at all?
I just thought flashing wrong RUU will cause an error and not stopping at restarting bootloader. And anyway the bootloader seems pretty broken since it is not flashing anything at all ^^
Still i gonna try it
Click to expand...
Click to collapse
Hi,
Probably ,the only thing that will fix your problem is a RUU.
So,keep trying different ones until it works.
I finally managed to find the phone via adb! I think that's a great step.
The biggest problem is that I lose any contact to the phone when i reboot it into bootloader.
I can just boot the phone into recovery and use any other adb function but as soon as I boot it into bootloader I can't do anything anymore.
That's why I cannot use any fastboot commands to flash a zip, neither run a RUU completely i guess.
So I think that i need any rom to either flash via recovery or just via PC not using fastboot/bootloader at all.
Are there any possibilities for me now?
fnstGoliath said:
I finally managed to find the phone via adb! I think that's a great step.
The biggest problem is that I lose any contact to the phone when i reboot it into bootloader.
I can just boot the phone into recovery and use any other adb function but as soon as I boot it into bootloader I can't do anything anymore.
That's why I cannot use any fastboot commands to flash a zip, neither run a RUU completely i guess.
So I think that i need any rom to either flash via recovery or just via PC not using fastboot/bootloader at all.
Are there any possibilities for me now?
Click to expand...
Click to collapse
Hi,
Plug your phone into the PC.
Go to device manager,and where it says MyHTC,right click and update driver.
Browse to the windows 7 & 8 drivers I gave you earlier.
Update,unplug phone ,and reboot PC.
Get a RUU that shows 3.32 or 3.33 in the title,and matches your region
Pull your battery.
Put it back in,and hold volume down and power button together.
Scroll to fastboot.
Plug in usb and run RUU from the PC
Hi all,
My HTC One Mini crashed one month after warranty (Boo!). I can get to the FASTBOOT and BOOTLOADER screen and select options. However, the Factory reset and recovery just cause a vibration and get be back to FASTBOOT menu. The phone is *** LOCKED ***.
After a few false starts on linux and mac machines, I've installed WinDroid Toolkit v3.1 on Windows 7. I have gotten the Token ID and used it to get an Unlock_code.bin via email from the HTC developers website (Cannot link as newb). However, when I follow the instructions in WinDroid it recommends that newer devices require "Enable OEM Unlock" to be set:
I cannot do this now. I continue but when it says a menu will appear on the phone, the menu does not and the phone remains in *** LOCKED *** state. I tried continuing with step 2 "Flashing a TWRP" but it does nothing.
TL;DR Am I screwed with having previously unlocked OEM on my HTC One Mini, now that it is soft-bricked?
I'm not that good at this stuff, but managed to get mine unlocked and a recovery on it via this link
sadly mine still has a problem in that it's now stuck in a boot loop, so don't use Oneclickroot as I did in my post here
hopefully you will get yours to work ok, but when you get to instruction 17 you may find that HTC website is quite fussy with the code you copy/paste
when you copy the Identifier block into Notepad or whatever, ensure you don't get any leading blank spaces before you submit it to HTC.
this excerpt from mine had blank spaces where I have inserted red X's, but it worked with them removed and HTC then emailed me the Unlock_code.bin file
XX<<<< Identifier Token Start >>>>
XX36ADF279412BE14D5002935236B24913
XXetc
XXetc
XX<<<<< Identifier Token End >>>>>
I hope this is of some use mate
---------- Post added at 02:39 PM ---------- Previous post was at 02:26 PM ----------
sorry,
lost the plot on my first reply and forget about the OEM unlock bit ...
to get that OEM unlock bit you would normally
first Enable Developer Modeon your phone by Launching the Settings Application -
Scroll Down and Tap on About Phone(or About Device) - Locate the Build Number Section - Tap on the Build Number Option 7 Times -
Go Back to the Main Settings Page - Scroll Down and Tap on Developer Options and it's found there
but given that you are in is bad a place as me in that we cannot get a bootup, I'm afraid I can't offer any more info,
but it's worth knowing anyway in case you do get booted up
Hi, i have the same issue, but a little different.
My phone was in a box for like 2 months, and then i decide to turn it on again, and i faced the same problem as the OP, but my One Mini is UNLOCKED, and i can't lock it again because i get an error in ADB. I try to enter on recovery (and flashed three differents recoveries without sucess), and reboot in bootloader, then try to factory reset, and reboot bootloader again. It don't do anything, only turn on when i plug the usb and enter in bootloader but no more than that. i've try to flash a RUU too, but it give me the error 171. i tried too the method with the rubber band pressing the power button to cause a reboot loop and get enough charge to launch the system but nothing, i don't see any results. I'm one step closer to give up, please help, i tried everything and nothing has worked for me. If need more information don't doubt on asking me. I really appreciate any help you can provide.
I'll try mate ... but perhaps you are asking for help from the wrong guy! - firstly I have to say mine is still in a very bad place! -
I managed to get a permanent TWRP on it, installed a lovely rom named InsertCoin on it, rebooted, and all seemed fine, but then the battery drained rapidly and it would not charge - that issue is ongoing and I'm spending ages on it just now..
Firstly can you confirm that you can enter Bootloader and select Fastboot, and that your phone is then recognised by your PC?
ie: let me know what happens when you press power and vol down together, select fasboot, goto PC, run ADB, cable phone to PC,
then issue the command ADB devices
can you also upload a photo of your bootloader screen
carkev said:
I'll try mate ... but perhaps you are asking for help from the wrong guy! - firstly I have to say mine is still in a very bad place! -
I managed to get a permanent TWRP on it, installed a lovely rom named InsertCoin on it, rebooted, and all seemed fine, but then the battery drained rapidly and it would not charge - that issue is ongoing and I'm spending ages on it just now..
Firstly can you confirm that you can enter Bootloader and select Fastboot, and that your phone is then recognised by your PC?
ie: let me know what happens when you press power and vol down together, select fasboot, goto PC, run ADB, cable phone to PC,
then issue the command ADB devices
can you also upload a photo of your bootloader screen
Click to expand...
Click to collapse
i don't need to press vol down and power together, the phone enter in bootloader once you plug the usb cable. it do that alone.
This is what i get
C:\adb>adb devices
List of devices attached
C:\adb>
the phone is recognized by HTC Sync manager but i can't see it in ADB.
a few things things jump out at me ...
1. from your photo the screen is shattered! - even though I don't like being beaten by phones I would scrap it
the repair would cost more than you can get one from ebay for - about £40.00
2. "abd devices" should return you something like ... "List of devices attached sh3d7h3dj631f6a7" - when it doesn't it show a device number it's usually your drivers
3. you may think that's not it since you say that it is recognised by HTC Sync when on your PC, but I had read that HTC sync is unreliable and that the drivers are not the best
the one's I used were HTC-Mobile-USB Driver-v4.17.0.001.exe but I can't remember where I got them and will upload them later today and send you a link.
(also, it pays to plug your usb cable into a rear port on your PC when doing this kind of work as front are not as reliable)
4. your Hboot is shown as 2.22 -this also can be a problem for TWRP see this link
5. the download link he has is broken, so get any TWRP above 2.7 from their website here
carkev said:
a few things things jump out at me ...
1. from your photo the screen is shattered! - even though I don't like being beaten by phones I would scrap it
the repair would cost more than you can get one from ebay for - about £40.00
Click to expand...
Click to collapse
Hahaha, i know, i have the replacement here, i'll change it once i solve this problem.
carkev said:
2. "abd devices" should return you something like ... "List of devices attached sh3d7h3dj631f6a7" - when it doesn't it show a device number it's usually your drivers
3. you may think that's not it since you say that it is recognised by HTC Sync when on your PC, but I had read that HTC sync is unreliable and that the drivers are not the best
the one's I used were HTC-Mobile-USB Driver-v4.17.0.001.exe but I can't remember where I got them and will upload them later today and send you a link.
(also, it pays to plug your usb cable into a rear port on your PC when doing this kind of work as front are not as reliable)
4. your Hboot is shown as 2.22 -this also can be a problem for TWRP see this link
5. the download link he has is broken, so get any TWRP above 2.7 from their website here
Click to expand...
Click to collapse
2. I will leave you down here exactly what i get when i type "adb devices" (with an attached image)
3. i have installed the latest HTC drivers, and i tried connecting my phone to front an rear usb ports, both of them. No results.
4. Down here i'll leave you an attached image of what i get when i try to install a recovery by typing "fastboot flash recovery recovery.img" (i changed the name to recovery.img of course) and the phone seems installing the recovery in fastboot but it gave me that error in adb and when i try to enter in recovery it reboots on bootloader.
your first image does not 'see' your device mate, so there is no point in trying a flash of anything
until you get a response from "adb devices" that shows a device number you have no chance of getting anywhere!
I am quite certain that the problem MUST be with your drivers
my advice would be to uninstall the HTC Sync and clean out any drivers on your PC and to install the drivers and flash the TWRP I mentioned earlier
sorry I didn't upload earlier as I've been very busy indeed - they are now on my Google Drive ... links here .... and here
carkev said:
your first image does not 'see' your device mate, so there is no point in trying a flash of anything
until you get a response from "adb devices" that shows a device number you have no chance of getting anywhere!
I am quite certain that the problem MUST be with your drivers
my advice would be to uninstall the HTC Sync and clean out any drivers on your PC and to install the drivers and flash the TWRP I mentioned earlier
sorry I didn't upload earlier as I've been very busy indeed - they are now on my Google Drive ... links here .... and here
Click to expand...
Click to collapse
Ok, don't worry mate, i'll try that and then i'll tell you.
Thanks for taking your time helping me.
EDIT: adb still seeing nothing with that drivers
Little Snevil said:
Ok, don't worry mate, i'll try that and then i'll tell you.
Thanks for taking your time helping me.
EDIT: adb still seeing nothing with that drivers
Click to expand...
Click to collapse
Hello guys, I've been following this thread and I'm having same issue. Adb does not sees my phone.
Fastboot does, but when I run ruu , it disconnects and give error 171
Tried usb 2 instead of 3.nothing.
I also think it's the drivers, but I can't seem to find the correct one for this phone. Any help is appreciated
my phone only starts in bootloader it have s-on and i cant use the toolkit cause usb debugging isnt active
adb writes waiting for device
can anyone help me?