Related
Hi,
First post (yay!) so I have a few questions:
1. Where is the 'thanks' button? There are loads of you I wanted to thank but it has not shown up on my forums where the help section said it would be. Has shown up now - guess I had to make a post before I could thanks people
2. I have the emmc chip that is prone to failure but after reading the forums it seems there may be a way to recover from it - is that right, and the chip is no longer a big problem? (Absolutely cannot afford to brick this phone as it's a present from a wife already angry that I rooted it)
3. Should I try to upgrade my HBOOT to 2.00.2002 and Radio (to what? the PCIMG88.zip from the Chinese website?) and install a new ROM, or try and revert everything back to s-on, unrooted stock rom and wait for the official update that is rolling out now in the UK? I'd prefer the option with the least chance of stress and bricking the phone.
4. After flashing a new ROM (if I do) I understand I should avoid updating/installing apps at the same time so my emmc chip isn't fried - can I reinstall 1 by 1 from Titanium backup, and won't Google start trying to download and install everything else at once? How do I avoid that?
I'm in the UK on T-Mobile PAYG with (I think) an unbranded Desire S
Android Version
2.3.3
HTC Version
2.1
Baseband Version
20.28b.30..0805u_38.03.02.11_M
Kernal Version
2.6.35.10-g13f6602
[email protected]#1
Build Number
1.28.401.1 CL24243 release-keys
Softawre Number
1.28.401.1
Saga PVT Ship S-off RL
hboot 6.98.1002
radio 38.03.02.11_Me
1.look at bottom right corner
4.if u restore all apps with titanium backup at once its ok, i think..
but when u setup your phone dont add google account to sync your app..
restore your apps and then add it..
take a look to ben_pyett signature for some useful links..
Theses are just my opinions
Thanks button to bottom right of each post next to edit button,
Don't bother upgrading you're hboot to 2.xx.xxxx (not yet any benefit)
Don't bother going back to s-on.
Don't pull battery.
I'd try to install the normal ENG bootloader over your revolutionary one if you can.
I'd also suggest installing the 4 EXT recovery instead of Cwm.
Don't do anything to you're device that you don't fully understand.
You've done the most difficult part making your device s-off now install some quality custom roms and enjoy it.
Always take full nandroid device backups prior to performing any steps on your device, so that you have a safe point to roll back to in case of problems.
When installing a new custom ROM don't enter your google account details until the last stage of the setup after the device had stopped all configuration, then go into the market app and check to see of it's installing any apps, if it is then cancel downloads, only some versions of market attempt the parallel download of several apps which has been linked to killing eMMC. Later one download one application at a time which seems ok..add suggested advice I also use titanium backup app to restore my apps after the new installation of a ROM rather than relying on market installs.
There is now more information on the eMMC issue, what was previously thought of a dead device can now be recovered but each instance is unique.
Enjoy
Swyped from my Desire S using XDA Premium
Guys,
Thanks for the replies - when I asked about the Thanks button it wasn't there, it only appeared after I posted so that is sorted now.
Ben, I do have 4EXT already installed and a backup, this isn't my first android phone but I would still class myself as a noob - I think I know what I'm doing generally but probably don't.
I think I might try for the ENG Hboot if I can find that post but I thought I would need the 2.00.2002 Hboot for sense 3.0 roms.
What is the advantage of the ENG Hboot over the revolutionary one?
Also, I'm wondering if I will receive an OTA option to update since I have s-off and rooted - I'm pretty sure I should not accept as it looks like some people have been experiencing problems trying to install the OTA over their non-stock phones/settings.
Can anyone confirm that:
1) my phone would see the update if it rolls out and
2) I should not install it unless I go back to stock rom and s-on?
Installing a new ROM will alert my wife to the fact I have rooted it so I'm in no hurry until I decide I can't live without some spectacular new features
Yep, DO NOT INSTALL THE OTA
^when you are rooted and s-off.
It will lead to problems.
I'd really suggest you try out Hyperion ROM/Saga 3D
They are like the stock ROMs with sense 3.0 (new OTA based)
They are optimised and better than the stock ota anyway
Sent from my HTC Desire S using xda premium
4myphone said:
Guys,
Thanks for the replies - when I asked about the Thanks button it wasn't there, it only appeared after I posted so that is sorted now.
Ben, I do have 4EXT already installed and a backup, this isn't my first android phone but I would still class myself as a noob - I think I know what I'm doing generally but probably don't.
I think I might try for the ENG Hboot if I can find that post but I thought I would need the 2.00.2002 Hboot for sense 3.0 roms.
What is the advantage of the ENG Hboot over the revolutionary one?
Also, I'm wondering if I will receive an OTA option to update since I have s-off and rooted - I'm pretty sure I should not accept as it looks like some people have been experiencing problems trying to install the OTA over their non-stock phones/settings.
Can anyone confirm that:
1) my phone would see the update if it rolls out and
2) I should not install it unless I go back to stock rom and s-on?
Installing a new ROM will alert my wife to the fact I have rooted it so I'm in no hurry until I decide I can't live without some spectacular new features
Click to expand...
Click to collapse
You shouldn't even consider OTA updates unless you're S-ON and STOCK....
certainly don't try it on a rooted device, just asking for trouble...I always simply disable the check for updates and Tell HTC features..
There are benefits to having ENG HBOOT (although I'm not 100% of all of them) I believe that you're able to downgrade easier, should you require the HBOOT number also doesn't stand out like a sore thumb......6.xx.xxxx should you want to return device!
All the new Sense 3.0 and Sense 3.5 ROMS work on old HBOOT, so just no point in upgrading, I did the upgrade before I released this and it's not worth going back.
EDIT: You also need to have a word with the misses! It's now your phone so you should be able to do what you want to it - whatever makes you happy!!
ben_pyett said:
You shouldn't even consider OTA updates unless you're S-ON and STOCK....
certainly don't try it on a rooted device, just asking for trouble...I always simply disable the check for updates and Tell HTC features..
There are benefits to having ENG HBOOT (although I'm not 100% of all of them) I believe that you're able to downgrade easier, should you require the HBOOT number also doesn't stand out like a sore thumb......6.xx.xxxx should you want to return device!
All the new Sense 3.0 and Sense 3.5 ROMS work on old HBOOT, so just no point in upgrading, I did the upgrade before I released this and it's not worth going back.
Click to expand...
Click to collapse
Was the hboot update 2.xxxx official, or was it from the Goapk forums?
Sent from my HTC Desire S using xda premium
olyloh6696 said:
Was the hboot update 2.xxxx official, or was it from the Goapk forums?
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
Mine? think it was from the forums, but, same version number as OTA released HBOOT? why do you ask?
ben_pyett said:
Mine? think it was from the forums, but, same version number as OTA released HBOOT? why do you ask?
Click to expand...
Click to collapse
Oh, just wondering, as i never saw the update posted officially...
So if it is official, why does the official sense 3.0 rom not make full use of the new partitions?
Sent from my iPod touch using Tapatalk
olyloh6696 said:
Oh, just wondering, as i never saw the update posted officially...
So if it is official, why does the official sense 3.0 rom not make full use of the new partitions?
Click to expand...
Click to collapse
I believe this is because the cooks have made it this way.....My understanding is that the "official" S-On OTA upgrade installs the new version HBOOT and makes use of this new layout.
Someone correct me if this is wrong?
ben_pyett said:
I believe this is because the cooks have made it this way.....My understanding is that the "official" S-On OTA upgrade installs the new version HBOOT and makes use of this new layout.
Someone correct me if this is wrong?
Click to expand...
Click to collapse
Oh right !
How can a OTA install a new hboot, radio, and complete new UI, but the user doesn't lose any data ?!
It's strange .. when we want to upgrade, we have to do a full wipe
Sent from my HTC Desire S using xda premium
Hi everyone! I'm new here so apologies for any mistakes, wrongs etc.
I needed some help with my HTC desire S, I'm new to all this rooting, flashing stuff, but i'm not too thick so understand some things. So heres the story/problem.
About a month ago I S-OFF my phone to try out some awesome custom ROMS, Granted i had some fun with them, I installed an unofficial 2.3.5 gingerbread with sense 3.0, just to see what the new sense was like, As I didn't receive the OTA update on my phone. But now i'd like to restore my phone back to the original ROM that came on the phone. I'm not to fused weather its S-OFF, all I really wanted was my original ROM as Sense 3.0 is running so slow on my phone, and its made a big difference in performance. I'm one of these guys who says please search the forum and google for help. And I did just this and found some great information yet of which i have had no luck with.
I've tried running an RUU whilst my phone is switch on and connected via HTC Sync, No luck. Model ID error 130....Please use the correct ROM (or something along those lines) So i found that u could flash the RUU after extracting the rom.zip and renaming it to PG88IMG.zip. So i did just this, still no luck, Updating was being processed and at the end of the update I got the message Wrong model ID and again Please use correct ROM (something like that anyway!)
Now your probably laughing at me by now thinking rialcniS you thick so and so, your using the wrong RUU. Which to anyone else sounds correct. But surely if i'm trying to convert back to the original stock ROM then 2.3.3 Gingerbread is the one to go for? as this was what my phone was running from the box!
So I did a little bit more research and found out that maybe its to do with my Hboot version. Below are my phones detail.
SAGA PVT ENG S-OFF
HBOOT-6.98.2000 (PG8810000)
RADIO-3822.09.08.20_M
eMMC-BOOT
FEB 24 2011,21:19:05
Software Information:
Android version - 2.3.5
HTC Sense Version - 3.0
Software Number - Desire S 2.10.401.4 [PROXUSER]
Kernel version - 2.6.35.10-g9ac6c7a
Baseband version - 20.48.30.0922U_3822.09.08.20_M
Build Number 2.10.401.4 CL156318 release-keys
Browser version - WebKit/533.1
From my research I found (or at least this is how it translates in my brain) is that I cant install an original stock ROM on Hboot 6.98.2000. Is this correct?
Anyway, for some more information to you guys when I load my phone up in fastboot, it starts searching for the PG88IMG.zip and also something along the lines of PG88DIAG, yet all it says underneath is Wrong or no image?
Am I being a complete idiot, or does this seem strange to some of you more advanced android rooters
If anyone can point me in the right direction to where i might be going wrong, id much appreciate it!
Thanks in advanced
Rialcnis!
rialcnis said:
Hi everyone! I'm new here so apologies for any mistakes, wrongs etc.
I needed some help with my HTC desire S, I'm new to all this rooting, flashing stuff, but i'm not too thick so understand some things. So heres the story/problem.
About a month ago I S-OFF my phone to try out some awesome custom ROMS, Granted i had some fun with them, I installed an unofficial 2.3.5 gingerbread with sense 3.0, just to see what the new sense was like, As I didn't receive the OTA update on my phone. But now i'd like to restore my phone back to the original ROM that came on the phone. I'm not to fused weather its S-OFF, all I really wanted was my original ROM as Sense 3.0 is running so slow on my phone, and its made a big difference in performance. I'm one of these guys who says please search the forum and google for help. And I did just this and found some great information yet of which i have had no luck with.
I've tried running an RUU whilst my phone is switch on and connected via HTC Sync, No luck. Model ID error 130....Please use the correct ROM (or something along those lines) So i found that u could flash the RUU after extracting the rom.zip and renaming it to PG88IMG.zip. So i did just this, still no luck, Updating was being processed and at the end of the update I got the message Wrong model ID and again Please use correct ROM (something like that anyway!)
Now your probably laughing at me by now thinking rialcniS you thick so and so, your using the wrong RUU. Which to anyone else sounds correct. But surely if i'm trying to convert back to the original stock ROM then 2.3.3 Gingerbread is the one to go for? as this was what my phone was running from the box!
So I did a little bit more research and found out that maybe its to do with my Hboot version. Below are my phones detail.
SAGA PVT ENG S-OFF
HBOOT-6.98.2000 (PG8810000)
RADIO-3822.09.08.20_M
eMMC-BOOT
FEB 24 2011,21:19:05
Software Information:
Android version - 2.3.5
HTC Sense Version - 3.0
Software Number - Desire S 2.10.401.4 [PROXUSER]
Kernel version - 2.6.35.10-g9ac6c7a
Baseband version - 20.48.30.0922U_3822.09.08.20_M
Build Number 2.10.401.4 CL156318 release-keys
Browser version - WebKit/533.1
From my research I found (or at least this is how it translates in my brain) is that I cant install an original stock ROM on Hboot 6.98.2000. Is this correct?
Anyway, for some more information to you guys when I load my phone up in fastboot, it starts searching for the PG88IMG.zip and also something along the lines of PG88DIAG, yet all it says underneath is Wrong or no image?
Am I being a complete idiot, or does this seem strange to some of you more advanced android rooters
If anyone can point me in the right direction to where i might be going wrong, id much appreciate it!
Thanks in advanced
Rialcnis!
Click to expand...
Click to collapse
Can't say much but I will point you to see this guide if it helps .
www.freeyourandroid.com/guide/flashing-ruu-htc
Sent from a darkly dreaming freak named Ray with a hTC Desire S in his hand which's rom is changed by the owner more than his clothes !
More useful info will be not the current state of your device, but what it was before the S-Off and customizing.
Setup the adb and fastboot commands on your PC /there is guide in my signature.
Then connect the device and type the following commands:
Code:
adb devices ([I]your device serial number should be displayed[/I])
adb shell [I](there should be a command prompt with the # symbol in front if not type "su" without the quotes[/I])
dd if=/dev/block/mmcblk0p17 of=/sdcard/misc.img ([I]this will create a misc.img file on your SDcard[/I])
Then copy the misc.img to your PC and open it with HEX editor (XVI32 is free, you can google it)
Open the misc.img with HEX Editor. There will be a number like 1.28.401.1 on line 6. This is the number of your original software.
Search in this thread for the proper RUU and install it.
Important! Before flashing the RUU change your hboot with this one
Maybe sounds complicated but nothing scary about it, just follow the steps carefully.
Good luck
use search there is a whole thread about downgrading the hboot ON THE FIRST PAGE.
Sorry, I had searched and searched everywhere for about 3 hours straight, and every time I found something that seemed promising i would get errors and have no luck.
@amidabuddha, Thankyou so much, this seems very promising. I'll give it ago tonight and keep you posted on the progress!
Thanks again!!
look for a thread called downgrading the new hboot.theres a guide ,it works fine as i have used it myself.
djisgod said:
use search there is a whole thread about downgrading the hboot ON THE FIRST PAGE.
Click to expand...
Click to collapse
djisgod said:
look for a thread called downgrading the new hboot.theres a guide ,it works fine as i have used it myself.
Click to expand...
Click to collapse
Hey, his problem is not the hboot, he needs his Stock configuration for his region (which is wise in order to keep the warranty). The only thing he needs for this is the proper RUU and overwrittable hboot, no downgrades, no other stuff
amidabuddha said:
Hey, his problem is not the hboot, he needs his Stock configuration for his region (which is wise in order to keep the warranty). The only thing he needs for this is the proper RUU and overwrittable hboot, no downgrades, no other stuff
Click to expand...
Click to collapse
So, thanks to you mate i've got it all back to stock! Fantastic! Thankyou very much for your help and keep up the good work!
rialcnis said:
So, thanks to you mate i've got it all back to stock! Fantastic! Thankyou very much for your help and keep up the good work!
Click to expand...
Click to collapse
Glad that you solved your issue.
Just out of curiosity - which one was your RUU?
And for your information (there was a complain in your first post about sense 3 performance) - if you receive the 2.10.x.x OTA update notification, the stock sense 3 runs pretty good on my device, no lagging, no bugs so far. So maybe you can give it a try when the time comes.
Enjoy your "new" phone
amidabuddha said:
Glad that you solved your issue.
Just out of curiosity - which one was your RUU?
And for your information (there was a complain in your first post about sense 3 performance) - if you receive the 2.10.x.x OTA update notification, the stock sense 3 runs pretty good on my device, no lagging, no bugs so far. So maybe you can give it a try when the time comes.
Enjoy your "new" phone
Click to expand...
Click to collapse
Yeah I'm not to sure, it was running slow and not nice and fresh like it is now! but i reckon now i know how to solve the problem if it occurs again i might give it a try my original RUU was the one u listed in your post 1.28.401.1. Nice and simple instructions you gave, so thanks very much again!!
Hi Guys,
Apologies if this has been discussed before. I have looked for answers everywhere and i could not find any.
Ok, I have a Desire S which is branded to Telstra (Australia), I was sick of all the useless app that Telstra had put in and wanted to get rid of all those.
I used revolutionary method to get it s-off and install Generic Firmware. After that i was happy not having any of Telstra's bloatware on the phone. Then came the update of 2.3.5 and as usual downloaded the firmware and used RRU to Update. Big mistake on my part, i didn't read anything and just tried to push RRU on the phone, the result was White screen with HTC logo and nothing past that. Tried everything no luck, then looking for answers, i found a solution to remove revolutionary, I could see revolutionary gone in HBOOT but the phone would not start.
to solve this i went to telstra to send it to repair, warranty was there and when telstra asked what happened, i said i was updating an app and it went to this screen, Tech guys said this is the similar 3rd problem in a day. so after 5 days the phone got repaired, New IMEI number and logic board had to be replaced.
Now all over again i have bunch of telstra bloatware on the phone. I want to get Generic 2.3.5 with sense 3.0. what is the process to follow so that i don't make the same mistake again?
All i want to do is get it s-off and install generic Firmware, the easiest way possible something like revolutionary. I tried going with ADB but found a bit risky.
Any advice in getting Generic HTC Desire S (2.3.5 with Sense 3.0) the easiest way would be helpful. Thanks in advance.
HBOOT info:
SAGA PVT SHIP s-ON RL
HBOOT-0.98.0002
RADIO-3805.04.02.01_M
eMMC-boot
Mar 30 2011,17:29:31
Thanks
To get a generic firmware from some other area, you need to get Super CID. I don't know much about it, just that CID's like a region code, Super CID enables you to get generic ROMs from any region. Only XTC Clip can do that on a Desire S as far as i know. Flashing a custom ROM after Revolutionary S-OFF is a better option....
Listen, I really recommend you to use a Custom ROM based on the update if you are ready to S-OFF. Hyperion is much faster and has a lot more features. Hell, if you do S-OFF, why settle for Sense 3? Get Sense 3.5. I recommend endymion.
@shrome99: Thanks dude, correct me if i am wrong, to get a generic firmware onto the desire s there is no option but to go for s-off and customs roms are better than stock ones, the reason i am asking is i have not used custom roms and willing to stick to stock.
What is the easiest way to get the rom sorted, I know how to get the custom rom installed there are too many posts everywhere that you can read through and make a decision and find roms of your choice, but there seems to be nothing about stock roms, i am sure there are people who are willing to get stock rom and their carrier is not rolling out the update coz they want more junk to be added.
Steps on how to get generic stock rom would be really helpful.
Thanks again
zryvffn said:
@shrome99: Thanks dude, correct me if i am wrong, to get a generic firmware onto the desire s there is no option but to go for s-off and customs roms are better than stock ones, the reason i am asking is i have not used custom roms and willing to stick to stock.
What is the easiest way to get the rom sorted, I know how to get the custom rom installed there are too many posts everywhere that you can read through and make a decision and find roms of your choice, but there seems to be nothing about stock roms, i am sure there are people who are willing to get stock rom and their carrier is not rolling out the update coz they want more junk to be added.
Steps on how to get generic stock rom would be really helpful.
Thanks again
Click to expand...
Click to collapse
+1 to above
IMO, if you're considering making a change then put on a decent custom (see my sig) you won't regret it
ben_pyett said:
+1 to above
IMO, if you're considering making a change then put on a decent custom (see my sig) you won't regret it
Click to expand...
Click to collapse
Hey Ben, Thanks for this, I went ahead and got the ROM as you suggested. Installed the base verison, then the add-on and the update. I have been palying around with it and so far loving it.
Only problem tough, I cannot use Market. I can open market look for apps and download, but when it starts to install, the phone re-boots. any known issues with this and is there a workaround to sort this out.
Ok, so here is what i did, Flashed Base version again and market started working again with no issues. Another issue which is not so much of an issue but only at night, why does the soft keys don't lit up on Desire S?. any way to fix these. Thanks guys.
Sometimes firing up and signing into Google talk makes the market start working again
Sent from my HTC Desire S using xda premium
sadsac said:
Sometimes firing up and signing into Google talk makes the market start working again
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
Thanks for that, I did a search for the issue and did the same thing as you had advised, but didn't work. Then I flashed the base version again and then the update, which worked. Don't know what had happened there.
But yeah loving the new rom and i would say was a better move to be on a custom ROM and getting rid of Carrier's junk installed.
Cheers!
Ok, so instead of creating a new post i have decided to post it here since it is already been discussed.
I was happy with rooted phone and endymion Rom and was happy until my phone started heating up and restarted on its own as if it had a mind of its own, I called HTC and they advised to send it for repair, i had to unroot the phone and sent for repair. Got the phone back with updated version and i need help rooting the phone.
when i boot the phone in fast boot this is what i get:
****LOCKED****
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
eMMC-BOOT
Aug 22 2011, 15:22:13
Android Version 2.3.5
HTC Sense Verison 3.0
Software Number: 2.14.841.4
Baseband Version: 2.14.841.4 CL 184593 Release-Keys
Now i need to Root the phone again so i can be another happy user of endymion.
I am looking at this guide and needed help.
http://forum.xda-developers.com/showthread.php?t=1443636&page=1
The oldest RUU i can find for my provider is RUU_Saga_Telstra_WWE_1.36.841.3_Radio_20.28d.30.0805U_3805.04.02.01_M_release_184558_signed.exe
I was reading the guide and this is where i am confused.
6.This command will gets you out of adb shell.. so we need to get back to adb shell and you will see "#" sign..meaning you are temp rooted and we can then proceed to changing MISC_VERSION:
Code:
adb shell
cd /data/local/tmp
./misc_version -s 1.27.405.6 .
./misc_version -s 1.27.405.6 do i change this to 1.36.841.3 or leave it as it is?
Any help will be greatly appreciated.
Thanks.
IMO you can leave it as it is. 1.27.xxx is older than your RUU version so I think it will work fine.
chninkel said:
IMO you can leave it as it is. 1.27.xxx is older than your RUU version so I think it will work fine.
Click to expand...
Click to collapse
Thanks for that, yes i did follow the guide, and then got stuck again. The problem i am facing is after pushing all the files as of the guide, i run tacoroot the phone restarts and all i get is a red triangle with exclamation mark in it and nothing else happens.
then to get rid of it, i pull out the battery and do a complete factory reset. I have done this about 5 times now but still the same.
Also tried using super one click but that dint work either and freezes on waiting for device.
anything i have missed or is there any other solutions, any GUI programs or video to help if i am missing something.
any help is appreciated.
Thanks
I believe that you have to boot the original recovery before using tacoroot to get it working ( I mean boot it once, then boot normally).
After using tacoroot --root, your phone will probably go in bootloop, don't worry about that and change your misc_version as described in the tutorial.
And please, stop pulling out the battery, you will brick your phone this way.
chninkel said:
And please, stop pulling out the battery, you will brick your phone this way.
Click to expand...
Click to collapse
+1
You can pull it out as often as you want..but at least you should know the risk.
Sent by my fingers to your head
chninkel said:
I believe that you have to boot the original recovery before using tacoroot to get it working ( I mean boot it once, then boot normally).
After using tacoroot --root, your phone will probably go in bootloop, don't worry about that and change your misc_version as described in the tutorial.
And please, stop pulling out the battery, you will brick your phone this way.
Click to expand...
Click to collapse
I don't understand,"boot into original recovery". To try i booted the phone in HBOOT and pressed recovery and same thing the triangle shows. am i missing something here.
EDIT: I went till the last step and this is what i get "Patching and backing up partition 17...
Error Opening backup file.
#"
any idea
zryvffn said:
To try i booted the phone in HBOOT and pressed recovery
Click to expand...
Click to collapse
That's what I meant.
You can try misc_version_universal to avoid error patching partition 17 (see attachment below).
chninkel said:
That's what I meant.
You can try misc_version_universal to avoid error patching partition 17 (see attachment below).
Click to expand...
Click to collapse
Thanks dude, this worked and going thru revolutionary. i did some changes in the steps and will update what i did in a while after i get a rom installed.
Thank you everyone for help and support. i was able to downgrade my HBOOT and install a custom ROM. It would not have been possible if you guys had not supported.
one thing i have learnt is the more you read the more you find things useful and you actually learn how ti weigh your risk and benefits and avoid ending up with an expensive paper weight.
so this is what i did.
after using universal misc version file i was getting 140 error in RUU, boot loader version error, tried 3 time but would not let me get past that, then out of frustration i thought about giving it a last try for good or for worse, in the misc version section i changed a bit.
adb shell
cd /data/local/tmp
./misc_version -s 1.36.841.3 (Same number as my RUU)
then RUU went fine and then revolutionary.
well, if any kind of newbie person in trying to root the phone i would suggest to read and if you think you have read enough, its probably you haven't.
special thanks to @chninkel, @eyahl. Thanks Guys for all the support.
Cheers!
Hi,
i recently got an HTC One S phone (used, no warranty). The phone seems to have been "played with" as it had Super User installed. However it was acting wierd so i did a factory recovery using the boot menu. This meant Super User was gone.
I am totally new to the updating an HTC phone, i found doing firmware changes to Sony and Samsung phones to be pretty much more easier!
My needs are pretty basic ! which is i want to achieve the following
I want to change my phone to have a normal CID without depending on carrier delays for updates (my CID is ORANG1)
I do not want to install a custom ROM, i want OTA updates to happen
I want to have my phone get the OTA update for Jelly Bean
When i boot into the phone (volume - + restart), i see the following,
*** TAMPERED ***
*** UNLOCKED ***
VLE PVT SHP S-ON RL
HBOOT-1.06.0000
RADIO-0.15.3150S.19_2
OpenDSP-v21.1.0.32.0314
eMMC-boot
Mar 15 2012, 23:37:23
Other facts
My CID - ORANG1 (using CID getter app)
Phone model - S4 Z520e
I hear the Jelly Bean update sorts the helicopter issue with the HOME button, though i am not sure if the restart issue when browsing with the stock browser has been resolved. The helicopter HOME issue is driving me nuts.
Appreciate if someone can provide me the steps about how i can go about getting my phone CID changed and the OTA udpates working for the new CID, as searching the forums have not really helped me nail the way i can go about doing this.
Before we get started I'd like to know your home country (sorry I don't know your flag) and whether you're on stock or custom recovery.
As I'm on this device from the very beginning and know almost any corner in this forum I'll point you out where to find the things and information you'll need and some advantages as well as some disadvantages of what you want. Also I'll point out an alternative.
rootrider said:
Before we get started I'd like to know your home country (sorry I don't know your flag) and whether you're on stock or custom recovery.
As I'm on this device from the very beginning and know almost any corner in this forum I'll point you out where to find the things and information you'll need and some advantages as well as some disadvantages of what you want. Also I'll point out an alternative.
Click to expand...
Click to collapse
Wonderful to hear a quick response.
I live in Sri Lanka (small Island nation located at the bottom part of India, last colonized by the British!). The situation is that i think i am in stock, as i got this phone used and though everything is functional the helicopter home button issue, phone freezing when i use the stock browser for over a few minutes, connection looses (all reported errors with 4.0.3 and even 0.4) means i need to get this to Jelly Bean to make the phone more usable as i love the size and speed of the phone.
To start of is there any way i can see if my phone is in stock or custom recovery? I just searched and found http://forum.xda-developers.com/showthread.php?t=2124349, does the instructions "Fastboot getvar version-main" work?
Another twist is that i have the much loved Windows 8 running on my PC, i am not sure if that will have any effect on any command executions.
Wait you got 1.06 Hboot I would not flash RUU or OTA if you got that because you can update what is needed or if needed for roms plus you don't have to piss about when flashing roms so if I was you don't do it.
Thank you and welcome to this forum!
Your bootloader is still at version 1.06. Which is very good, as yours and version 1.09 allow you to flash nearly everything (kernels, radios, etc.) from within your device. Bootloader versions higher than 1.09 don't allow this anymore. For flashing kernels and radios you then will need to get into the phones fastboot mode and use the Android SDK on your pc, typing things like 'fastboot flash boot boot.img'.
Let's get started with recovery. To root your phone you usually need to flash a custom recovery. TWRP is the only one working bugfree atm. You can download it here.
To flash it and doing other usefull things try to get comfortable with the HTC One S All-in-one-toolkit.
So why do I mention this, also you wrote that the only thing you want to do is udating straightly to JB?
After the OTA update you'll be on bootloader version 2.15. It's just one more thing from htc to lock their devices even more, as at this time they don't behave very friendly to the dev community. Downgrading the bootloader is kind of pain and not easy so, unless you're familiar with linux (I did it succesfully several times).
Also stock JB from htc has one more surprise: Your system folder will be kind of write protected, which means, also you seem to have full root, after a reboot your formerly deleted (you thought so) files wil be back. Also added files in that folder won't be present any more. That crap is hardcoded into htc's JB kernel and sources are not available atm. But this problem was solved by flar2, who wrote a kernel module to bypass this.
So your hardware issues are left. As I'm not concerned by this I can only summarize what I read about these in the forum. They are obviously hardware related and therefore independant from software. Somebody wrote, a new radio had helped, others write different. In summary you'll have to check this out for your device.
Let's resume at this point:
Your device is unlocked and at 1.06. It needs to be relocked for the JB update and it will have a less comfortable bootloader version afterwards and it will be hard to get rid of the crapware in your system folder, as you'll have to unlock and root again for doing so. And it's questionable the JB OTA update will fix your hardware issues.
So I'd recommend the following procedure (you could still do the OTA update at any time, I'll help you then):
- use the all-in-one-toolkit, flash latest TWRP
- Flash latest EU radio 1.11 from here with twrp
- restore JB from my nandroid backup (download 3.16)
- if you experience troubles with your wifi connection, flash these wifi partitions
- check if your hardware troubles have been resolved
- to get root use all-in-one-toolkit again and flash elemental kernel (by flar2)
It seems a lot of work, but it's worth it. PM me, if you need additional help or decide to do the OTA update.
wow, thanks so much for all the info. I will give this a try tonight as i have the phone @ home, using my One X as the regular phone until i get the One S sorted. Then i will hope push out the One X and keep the One S as my regular phone. I prefer the One S size which is more ideal for one handed operation, shame that HTC opted for a pentile display that took out the sharpness.
Also based on your suggestions would it be better for me to opt for a custom ROM than HTC standard to resolve my issues?
I examined most if not all Boot Loop related items in XDA-Developers, as well as other sources. Although there are lots of suggestions, I cannot find one that relates to my specific situation. The last thing I want to do is make it worse. So, here's my story. I'll keep it brief, but concise.
I've had my Sensation 4G for a little over two years. Soon after purchase, I rooted it via the Revolutionary mechanism. Unfortunately (I think), I also opted for the Clockwork Mod. Unfortunately, I have not been able to do OTA updates, and find I'm still running 2.3.4.
I recently desired to purchase the HTC One for T-Mobile, and did so. I wanted to pass on my Sensation 4G to my sister. Therefore I needed to unroot it. I did weeks of reading about all the ways to do this. Early last week I attempted doing so by following the directions found here (http://kgs1992.com/ruu-guide/). I used the PG58IMG file found here (http://forum.xda-developers.com/showthread.php?t=1459767#2). The file selected was Firmware 3.33 Universal: (http://d-h.st/SuC). I followed the directions precisely. All appeared to run properly, and appeared to end with successful messages. At the end of the instructions it states "If you experience a boot loop, repeat 4.4.2 again." I did that several times. I still have the boot loop.
I started the process with this...
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.17.1111
RADIO-10.14.9035.01_M
eMCC-boot
Jun 2 2011.22:31:39
HBOOT
(VOL UP) to previous item
(VOL DOWN to next item
(POWER) to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
Following afore-mentioned process it says...
-Firmware-3.33-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.24a. 3504.31-M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012,17:33:34
That brings me to my big question. What do I do now? I had hoped to retain my contacts and applications. I'd like to first attempt ways to fix it and still salvage what's on the phone, but ultimately I just need the phone to work. I should also mention that I've downloaded the following two files. My next attempt was going to execute the top one, but I don't know the status of the phone after doing so. Can anyone help me? Are there other things I should try first?
RUU_PYRAMID_ICS_TMOUS_3.32.531.14_Radio_11.69A.3504.00U_11.23.3504.07_M2_release_256085_signed.exe
RUU_Pyramid_TMOUS_1.50.531.1_Radio_10.56.9035.00U_10.14.9035.01_M_release_223976_signed.exe
Micalee said:
I examined most if not all Boot Loop related items in XDA-Developers, as well as other sources. Although there are lots of suggestions, I cannot find one that relates to my specific situation. The last thing I want to do is make it worse. So, here's my story. I'll keep it brief, but concise.
I've had my Sensation 4G for a little over two years. Soon after purchase, I rooted it via the Revolutionary mechanism. Unfortunately (I think), I also opted for the Clockwork Mod. Unfortunately, I have not been able to do OTA updates, and find I'm still running 2.3.4.
I recently desired to purchase the HTC One for T-Mobile, and did so. I wanted to pass on my Sensation 4G to my sister. Therefore I needed to unroot it. I did weeks of reading about all the ways to do this. Early last week I attempted doing so by following the directions found here (http://kgs1992.com/ruu-guide/). I used the PG58IMG file found here (http://forum.xda-developers.com/showthread.php?t=1459767#2). The file selected was Firmware 3.33 Universal: (http://d-h.st/SuC). I followed the directions precisely. All appeared to run properly, and appeared to end with successful messages. At the end of the instructions it states "If you experience a boot loop, repeat 4.4.2 again." I did that several times. I still have the boot loop.
I started the process with this...
-Revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.17.1111
RADIO-10.14.9035.01_M
eMCC-boot
Jun 2 2011.22:31:39
HBOOT
(VOL UP) to previous item
(VOL DOWN to next item
(POWER) to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
Following afore-mentioned process it says...
-Firmware-3.33-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.24a. 3504.31-M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012,17:33:34
That brings me to my big question. What do I do now? I had hoped to retain my contacts and applications. I'd like to first attempt ways to fix it and still salvage what's on the phone, but ultimately I just need the phone to work. I should also mention that I've downloaded the following two files. My next attempt was going to execute the top one, but I don't know the status of the phone after doing so. Can anyone help me? Are there other things I should try first?
RUU_PYRAMID_ICS_TMOUS_3.32.531.14_Radio_11.69A.3504.00U_11.23.3504.07_M2_release_256085_signed.exe
RUU_Pyramid_TMOUS_1.50.531.1_Radio_10.56.9035.00U_10.14.9035.01_M_release_223976_signed.exe
Click to expand...
Click to collapse
You will probably have to wipe the data partition, and therefore delete your contacts and apps (but if your contacts are saved on your google account they will be restored).
:
Do you have access to the recovery? from there you can flash a ROM and do a fresh install. I got that problem when I upgraded to the newer firmware, and I just flashed the ROM, and then everything worked fine.
astar26 said:
You will probably have to wipe the data partition, and therefore delete your contacts and apps (but if your contacts are saved on your google account they will be restored).
:
Do you have access to the recovery? from there you can flash a ROM and do a fresh install. I got that problem when I upgraded to the newer firmware, and I just flashed the ROM, and then everything worked fine.
Click to expand...
Click to collapse
I'm not sure I know what the data partition is. I can get to all my apps via play.google.com. I took full Titanium Backups, so maybe that'll be an option. Those backups were copied to my laptop.
As to Recovery, I can access it, but cannot put anything on the sd card as I do not have access to it. Apparently I can only do things via ADB.
I was just reading "A must read for those noobs who want to enjoy ICS". Perhaps there is a solution. There are apparently conflicts with Hboot versions and ICS or something. I just found that, so I'm still looking into that. I don't know how to deal with only Hboot.
Micalee said:
I'm not sure I know what the data partition is. I can get to all my apps via play.google.com. I took full Titanium Backups, so maybe that'll be an option. Those backups were copied to my laptop.
As to Recovery, I can access it, but cannot put anything on the sd card as I do not have access to it. Apparently I can only do things via ADB.
I was just reading "A must read for those noobs who want to enjoy ICS". Perhaps there is a solution. There are apparently conflicts with Hboot versions and ICS or something. I just found that, so I'm still looking into that. I don't know how to deal with only Hboot.
Click to expand...
Click to collapse
You can connect your MicroSD card via another phone to the PC, and also use the "adb push" command to push the ROM files to the root of the microSD card. Also, some recoveries allow mounting the SD card to the PC like doing it when the phone is booted, as an external drive, check for it in the recovery.
To move the ROM files to the SD card:
put the files in the folder where ADB is located
On command line type: "adb push rom.zip /sdcard/rom.zip"
Where rom.zip is the name of the rom file you are going to flash. this should work, here is a full guide to help you pushing the file via ADB: http://forum.xda-developers.com/showthread.php?t=1667929
Good luck
astar26 said:
You can connect your MicroSD card via another phone to the PC, and also use the "adb push" command to push the ROM files to the root of the microSD card. Also, some recoveries allow mounting the SD card to the PC like doing it when the phone is booted, as an external drive, check for it in the recovery.
To move the ROM files to the SD card:
put the files in the folder where ADB is located
On command line type: "adb push rom.zip /sdcard/rom.zip"
Where rom.zip is the name of the rom file you are going to flash. this should work, here is a full guide to help you pushing the file via ADB: http://forum.xda-developers.com/showthread.php?t=1667929
Good luck
Click to expand...
Click to collapse
That certainly sounds doable. I went to the link you provided. I'm not sure how pushing the rom.zip to the sdcard and doing the recovery via the phone's recovery is different than via the adb command as done earlier. The adb command process seemed to work correctly, except for the resulting boot loop. Apparently I still need to determine which rom.zip will leave me with a function phone. The only other difference in what I read at the link you provided was to do the various ["Factory Reset", "Wipe Cache Partition", and "Wipe Dalvik Cache]" commands, which I have not done. I need to determine whether those commands are necessary in my case. Thank you for your contribution.
What's happens here is that you have placed ice cream sandwich firmware with a gingerbread Rom. Gingerbread doesn't support it and as such won't boot. If you want to regain access to everything again the reflash 1.17 firmware from the thread. Then your Rom should boot up. Then jump to recovery and make a full nandroid back up. Then re-flash the ics 3.33 universal firmware and then run one of the ics ruu's you downloaded. That will make the phone have a fresh install of ics and stock HTC sense unrooted
don't try to s-on again as their is no real point to it. It's not going back for warrenty so what's the concern eh?
Good luck pal
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2
Micalee said:
That certainly sounds doable. I went to the link you provided. I'm not sure how pushing the rom.zip to the sdcard and doing the recovery via the phone's recovery is different than via the adb command as done earlier. The adb command process seemed to work correctly, except for the resulting boot loop. Apparently I still need to determine which rom.zip will leave me with a function phone. The only other difference in what I read at the link you provided was to do the various ["Factory Reset", "Wipe Cache Partition", and "Wipe Dalvik Cache]" commands, which I have not done. I need to determine whether those commands are necessary in my case. Thank you for your contribution.
Click to expand...
Click to collapse
If you want you should backup via recovery, but wiping the phone after is necessary. if you managed to push the ROM to the SD-card, you can normally flash. but use a ICS (or newer) ROM, that supports the firmware.
In contrast to what heavy_metal_man said, you can do a nandroid backup as it is, as the files are still there. but you don't have much to do with it.
Edit - If you need any help doing it step by step - I'm here to help, just say where you are stuck on the guide (or just explain)
heavy_metal_man said:
What's happens here is that you have placed ice cream sandwich firmware with a gingerbread Rom. Gingerbread doesn't support it and as such won't boot. If you want to regain access to everything again the reflash 1.17 firmware from the thread. Then your Rom should boot up. Then jump to recovery and make a full nandroid back up. Then re-flash the ics 3.33 universal firmware and then run one of the ics ruu's you downloaded. That will make the phone have a fresh install of ics and stock HTC sense unrooted
don't try to s-on again as their is no real point to it. It's not going back for warrenty so what's the concern eh?
Good luck pal
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2
Click to expand...
Click to collapse
Thanks heavy_metal_man for that information. In the mean time, while waiting for another suggestion, I decided to try a different rom. That was due to the comments I'd seen about conflicts between Hboot and ICS. So, just for the heck of it I went through whole routine, using ROM V3.12. After doing so (twice), the phone booted! Amazingly, other than thinking it's 1970, it appears to be identical to what it was before I ever did anything. It's still running V2.3.4 of Android, and Sense V3.0. I don't recall which version of Sense was there before. After it booted, I shut it down again and put it in Recovery mode. There have been a number of changes there. Now it says...
*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.23.0000
RADIO-11.19.3504.29.2
OpenADSP-v01.6.0.2226.00.1227
eMMC-boot
Dec 26 2011.12:14:25
Does any of this information affect or change your suggestion in any way? I'd still like to get ICS on this thing so the latest is available for when I give it to my sister. I wonder what will happen if I attempt OTA? By the way, it still has Revolutionary CWM V4.0.1.4 on it.
Micalee said:
Thanks heavy_metal_man for that information. In the mean time, while waiting for another suggestion, I decided to try a different rom. That was due to the comments I'd seen about conflicts between Hboot and ICS. So, just for the heck of it I went through whole routine, using ROM V3.12. After doing so (twice), the phone booted! Amazingly, other than thinking it's 1970, it appears to be identical to what it was before I ever did anything. It's still running V2.3.4 of Android, and Sense V3.0. I don't recall which version of Sense was there before. After it booted, I shut it down again and put it in Recovery mode. There have been a number of changes there. Now it says...
*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.23.0000
RADIO-11.19.3504.29.2
OpenADSP-v01.6.0.2226.00.1227
eMMC-boot
Dec 26 2011.12:14:25
Does any of this information affect or change your suggestion in any way? I'd still like to get ICS on this thing so the latest is available for when I give it to my sister. I wonder what will happen if I attempt OTA? By the way, it still has Revolutionary CWM V4.0.1.4 on it.
Click to expand...
Click to collapse
you just used a ruu.exe from pc and restored everything to stock condition
but how you were able to keep custom recovery(cwm V4.0.1.4)
when you flashed the 3.33 firmware you could just install a custom ics rom
because with 3.33 firmware the gb rom you had it would never booted
about OTA i assume nothing will happen as long as you have cwm recovery installed
you must have the stock recovery
Well, since you flashed a new rom you can disregard my first suggestion and go straight for running the ics ruu you have. Ota updates will not work if you dont have the stock recovery. But the ruu will give you it so ota will work, but the updates will be for the cid of the rom you flashed. So flash a WWE rom to make sure you get any updates, but at this point their will be few if any.
Aside from that you will be all sorted pal
Sent from my Nexus 7 using Tapatalk 4
Thanks again heavy_metal_man. It wasn't that I ignored your suggestion, I tried the second (V3.12) Rom before I had seen it. As for your last entry, I was following it until you hit me with the WWE reference. As for the V3.12 Rom I used, there was a direct MIB match, and the CID used was cid******, so a direct match was not necessary as far as I can determine. I could have edited the txt file and inserted my actual CID however. Also, was your comment about "the ics ruu I have", in reference to the two RUU_PYRAMID_ICS_TMOUS...etc. files I mentioned that I had already downloaded? Running one of those will be a new experience. I'll run the latest. If that works, I'll be a happy camper. I've learned a lot, but I have a long way to go.
Micalee said:
Thanks again heavy_metal_man. It wasn't that I ignored your suggestion, I tried the second (V3.12) Rom before I had seen it. As for your last entry, I was following it until you hit me with the WWE reference. As for the V3.12 Rom I used, there was a direct MIB match, and the CID used was cid******, so a direct match was not necessary as far as I can determine. I could have edited the txt file and inserted my actual CID however. Also, was your comment about "the ics ruu I have", in reference to the two RUU_PYRAMID_ICS_TMOUS...etc. files I mentioned that I had already downloaded? Running one of those will be a new experience. I'll run the latest. If that works, I'll be a happy camper. I've learned a lot, but I have a long way to go.
Click to expand...
Click to collapse
ah sorry, getting ahead of myself with terminology here WWE stand for world wide English. most unbranded phones run on world wide English roms, and if people are downgrading/upgrading they tend to want unbranded as they will get official htc updates faster
as far as cid`s are concerned they dont really matter as you are s-off and the phone will accept any ruu (rom update utility) you give it. one note of caution though is you have select a t-mobileus ruu and they are ment to be for the tmobile sensation 4g. if you dont have the tmobus 4g it may give you some issues with the radio, meaning you may lose phone signal. ( im not 100% sure but caution is advised )
if you dont have a sensation 4g then download and run this one here. im pretty confident that its a stock ice cream sandwich unbranded rom
Running the RUU is simple enough, just boot the phone into your stock 2.3.4 rom and turn on usb debugging from settings for good measure. Then connect the phone to the pc via the usb cable and then run the RUU. it will connnect to the phone and confirm the phone is the correct model i believe, then it will confirm this is what you want to do. select yes and let it work its magic. its pretty straight forward they phone may reboot several times, this is normal. just dont disconnect the battery or the usb cable and you will be fine. should be done in ten minutes tops
good luck pal
I made it through the RUU process, but not without some difficulty. When I ran the RUU_PYRAMID_ICS_TMOUS_3.32.531.14 version, it died with an Error 155. Fortunately it left everything intact. Then I ran the older RUU_Pyramid_TMOUS_1.50.531.1 non-ICS version. It got the same error. I think these errors must somehow be due to the peculiar results from flashing the PG58IMG file earlier. Once again, it left everything intact. I tried the RUU ICS 3.32 version one more time, except this time I put the phone in flashboot mode first. Curiously, the RUU screen that came up thought it was updating a later version than what was actually on the phone, but IT RAN... all the way through to a successful finish. I was stunned. Now the phone reports...
-Firmware-3.33-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.24a. 3504.31-M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012,17:33:34
The entire process left my SD card intact as well. Amazing. It still says S-OFF as you expected. I may or may not attempt turning S-On again.
One comment I'd like to make about xda-developers. There is an amazing amount of information here. The biggest problem I've encountered is trying to figure out if I'm looking at, or have found, the latest information. Some times I'll find something that looks pertinent, only to find that I'm on page 2 of a 114 page thread, and the information I'm looking at is completely obsolete. It's tough for a noob to decipher it all. Anyway, thanks again for everyone's assistance. I think this is a proper place to terminate this particular thread. Now I'll start looking for the latest information on rooting my new HTC ONE. At least I have a fall back phone in my newly restored Sensation 4G. I'm not sure I'm in love the ONE yet, so perhaps I'll take it back. I'm within my 14 day return window.
I'm glad your sorted pal the threads can be a bit out of date, maintenance of information is not really regulated but as always if people are unsure just ask, quoting the info you have and what you think is the case
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk 2
Micalee said:
I made it through the RUU process, but not without some difficulty. When I ran the RUU_PYRAMID_ICS_TMOUS_3.32.531.14 version, it died with an Error 155. Fortunately it left everything intact. Then I ran the older RUU_Pyramid_TMOUS_1.50.531.1 non-ICS version. It got the same error. I think these errors must somehow be due to the peculiar results from flashing the PG58IMG file earlier. Once again, it left everything intact. I tried the RUU ICS 3.32 version one more time, except this time I put the phone in flashboot mode first. Curiously, the RUU screen that came up thought it was updating a later version than what was actually on the phone, but IT RAN... all the way through to a successful finish. I was stunned. Now the phone reports...
-Firmware-3.33-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.24a. 3504.31-M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
Jan 13 2012,17:33:34
The entire process left my SD card intact as well. Amazing. It still says S-OFF as you expected. I may or may not attempt turning S-On again.
One comment I'd like to make about xda-developers. There is an amazing amount of information here. The biggest problem I've encountered is trying to figure out if I'm looking at, or have found, the latest information. Some times I'll find something that looks pertinent, only to find that I'm on page 2 of a 114 page thread, and the information I'm looking at is completely obsolete. It's tough for a noob to decipher it all. Anyway, thanks again for everyone's assistance. I think this is a proper place to terminate this particular thread. Now I'll start looking for the latest information on rooting my new HTC ONE. At least I have a fall back phone in my newly restored Sensation 4G. I'm not sure I'm in love the ONE yet, so perhaps I'll take it back. I'm within my 14 day return window.
Click to expand...
Click to collapse
actually are you sure that you flashed the ruu.exe correctly?
you still have the patched hboot and on top of the screen it still says firmware 3.33 which is the patched one
don't attempt to S-ON.probably you will brick the device
after ruu installation your bootloader should say relocked or locked on top of the screen
edit:if i remember well error 155 means a connection issue
rzr86 said:
actually are you sure that you flashed the ruu.exe correctly?
you still have the patched hboot and on top of the screen it still says firmware 3.33 which is the patched one
don't attempt to S-ON.probably you will brick the device
after ruu installation your bootloader should say relocked or locked on top of the screen
edit:if i remember well error 155 means a connection issue
Click to expand...
Click to collapse
Flashed? All I did was run the program. It did whatever it did. I think the 3.33 was somehow left over from flashing a PG58IMG I'd gotten from here>http://forum.xda-developers.com/showthread.php?t=1459767#2. That failed as explained earlier in this thread. I figured that running the RUU would overwrite that failure, and I'm surprised it didn't. All I care is that I'm now getting OTA updates correctly. Yeah, I won't be trying to S-ON. I've thought about rerunning the RUU (3.32) again, but for now I'm going to just leave well enough alone.
I forgot to mention. This information was in the documentation for the RUU
ERROR [155~159]: IMAGE ERROR
One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again.
One last note. I returned the HTC ONE, and have reactivated the Sensation 4g which this thread is about. The HTC ONE hardware is wonderful, but I didn't like all the HTC ONE software "features" you can't turn off. Maybe I'll jump ship and go with the Samsung Galaxy S4. In the mean time, this Sensation 4G is okay.
Micalee said:
Flashed? All I did was run the program. It did whatever it did. I think the 3.33 was somehow left over from flashing a PG58IMG I'd gotten from here>http://forum.xda-developers.com/showthread.php?t=1459767#2. That failed as explained earlier in this thread. I figured that running the RUU would overwrite that failure, and I'm surprised it didn't. All I care is that I'm now getting OTA updates correctly. Yeah, I won't be trying to S-ON. I've thought about rerunning the RUU (3.32) again, but for now I'm going to just leave well enough alone.
I forgot to mention. This information was in the documentation for the RUU
ERROR [155~159]: IMAGE ERROR
One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again.
One last note. I returned the HTC ONE, and have reactivated the Sensation 4g which this thread is about. The HTC ONE hardware is wonderful, but I didn't like all the HTC ONE software "features" you can't turn off. Maybe I'll jump ship and go with the Samsung Galaxy S4. In the mean time, this Sensation 4G is okay.
Click to expand...
Click to collapse
exactly the firmware 3.33 and the 1.27.1100 hboot version are from 3.33 universal firmware zip(from the thread you mentioned)
but as long as you are on S-OFF you can use any ruu.exe if you are also supercid
When the PG58IMG flash failed, I assumed at that time that it failed completely, and that no part of it actually worked. I'm too much of a noob to understand the pieces, or elements of the phone's software vs. firmware. I know the difference of course, but not as they relate to this phone, and certainly not as they relate to all the various flashes or other 'fixes' or other such mechanisms I see here on xda-developers.
If I get the nerve to attempt it, is there a way to get everything to a fully legitimate 'stock' situation? That is, just in case I upgrade to another phone again and want to sell this Sensation 4G? For example, I wonder what would be the result of a factory reset at this point? I realize it'll wipe everything out of course, but I wouldn't care.
Micalee said:
When the PG58IMG flash failed, I assumed at that time that it failed completely, and that no part of it actually worked. I'm too much of a noob to understand the pieces, or elements of the phone's software vs. firmware. I know the difference of course, but not as they relate to this phone, and certainly not as they relate to all the various flashes or other 'fixes' or other such mechanisms I see here on xda-developers.
If I get the nerve to attempt it, is there a way to get everything to a fully legitimate 'stock' situation? That is, just in case I upgrade to another phone again and want to sell this Sensation 4G? For example, I wonder what would be the result of a factory reset at this point? I realize it'll wipe everything out of course, but I wouldn't care.
Click to expand...
Click to collapse
A factory reset only deletes the data partition and cache, not any other partition. There are ROMs that are based on stock (and even stock). By fully legitimate 'stock' situation I believe you mean S-On and every thing stock. There are guies for that in the general and development forums.