Database Info

Installing BaseBang for custom rom ??

I am thinking of installing Kind 3d Rom on my O3D... is it necessary to install a baseband for Gingerbread first ? If so whats the best baseband available and how to install it ..... just like flashing custom rom or theres some other way .. ??

+ my O3d is working fine , so i dont install the baseband and update to 2.3 rom will it have it effect ... sometimes i loose connectivity and have to restart but i thinks that is due poor network coverage.

Hi, I only recently got my O3D and it was locked to one network. I bought an unlock code (had to wait for it) and preceded to install king rom. When I tried to put lock code in it wouldnt let me. I then realised that even an original network sim wouldnt work and my imei number was not showing on the phone.
Hence I found I needed to update the baseband to allow the network to be picked up.
So yes you need to, however I updated the baseband after gb install and it worked fine, not sure about doing the baseband update beforehand.
I used baseband v18 and whilst signal is not as good as my old defy, I am not complaining too much
Hope this helps
Sent from my LG-P920 using XDA App

You have to install baseband. It doesn't matter if you do it before or after flashing the rom
Sent from my LG-P920 using Tapatalk

tucka20 said:
Hi, I only recently got my O3D and it was locked to one network. I bought an unlock code (had to wait for it) and preceded to install king rom. When I tried to put lock code in it wouldnt let me. I then realised that even an original network sim wouldnt work and my imei number was not showing on the phone.
Hence I found I needed to update the baseband to allow the network to be picked up.
So yes you need to, however I updated the baseband after gb install and it worked fine, not sure about doing the baseband update beforehand.
I used baseband v18 and whilst signal is not as good as my old defy, I am not complaining too much
Hope this helps
Sent from my LG-P920 using XDA App
Click to expand...
Click to collapse
Can u plz post the links for the basebands ..... ? R these basebands region specific ?

or should i try them one by one .....?

Is the baseband updated in the same way ?
Install CWM on mobile , flash the baseband ???

Hi all, noob guy here, i really need some help. I rooted my optimus 3d and installed ice cream sandwich rom, since then i cant use my phone or send txts, it does not regognise my sim card. the rom is working fine and looks great though.lol. Is there a way in which i can revert back to stock rom? any help would be really appreaciated.TIA.

Why don't you all simply just install the official Gingerbread update from LG and then afterwards try out the custom roms based on the Gingerbread release? I don't get it...

Is it that easy?just put it in the SD card and then install....etc??I am havinga cold feet installing any costume rom cause I hear this and that..I am on official GB 21A and rooted..donnu wat to to do really..

Hi to everyone.I just bought my O3d after SE Arc,and i love this phone,but im stuck with update to gingerbread,i was not able to flash baseband first so now i want to update to official gb but lg mobile support software say that my phone is up to date even than im on froyo 2.2.2,and in settings there is no option such as ota update or something like that.Can i update my O3d with lg pc suite 4?

[Q] Sensation XL Help

Hi Guys,
Sorry if this is the wrong area as i am new.....
I am currently starting to get into bulding roms etc, but i am wanting to revert to stock however i cant find one for australia. Is there any issue using a stock ruu from a diferent region, and if so what are they?
I have ICZ at the moment and want to wait for the OTA update to start modding that, and just want to be able to go back to GB for now.
Also to install an ruu should it be done directly from phone or via pc and usb connection?
I am thinking of installing a runnymede rom from europe. Does anyone have any suggestions as to if this will allow me to get the proper ICS OTA upgrade? Or any ideas on how to install a stock rom in australia??
Thanks very much, John

Find you phone in the forum and go to development post your topic there or in the help section of that phone section.
Thats the best i can do

[Q] no network after new rom

After changing the rom from stock to custom rom of my lg optimus 3d my phone dosent read sim.
I was using gingerbred 2.3.5 then i change to ThiZo3d rom when i install it every thing was working fine but there was no network. In Lockscreen No sim card insert also in the notification bar there was X logo in network.
I also make backup of my stockrom but there was no signal and also make a factory reset too plz help i might miss something its my first time of changing to custom rom plz help.

Hi! Update Baseband! v21x rom- v21x baseband

Its my first time changing the rom so plz can u tell me where can i change basebang can u plz send me the link of baseband

sanyo8 said:
Hi! Update Baseband! v21x rom- v21x baseband
Click to expand...
Click to collapse
Can you plz send me link of that baseband

http://forum.xda-developers.com/showthread.php?t=1667414

sanyo8 said:
http://forum.xda-developers.com/showthread.php?t=1667414
Click to expand...
Click to collapse
thats too much harder can you please tell me i have return to my stock rom (2.3.5) what should i do to get sim working i only need sim working. Well im iphone user thats why im little nobish for andriod so my friend told me of some thing to use your IME then you will get sim working Well i can see ime after *#*#06#*#*
so what should i do with my ime to get sim working :'(

can anyone please tell me i install Thiazo3d in my o3d then there was no network after that i also make backup of my previous rom (stock 2.3.5) so now i have return to my stock rom (2.3.5) still no signal of sim but wifi and every thing working what should i do to get sim working i only need sim working. Well im iphone user thats why im little nobish for andriod so my friend told me of some thing to use your IME then you will get sim working Well i can see ime after *#*#06#*#*
so what should i do with my ime to get sim working :'(

go back to thiaiz and install the proper kernel. this works fine for me. im a p925g guy, and i had similar issues. it's not the end of the world

Now using prosmetic rom its my mobile is working

Solution for AT&T HTC ONE X Signal Dropping Issue / cellular network problem / data

Solution for AT&T HTC ONE X Signal Dropping Issue / cellular network problem / data
Solution for AT&T HTC ONE X Signal Dropping Issue / cellular network problem / data
Hi guys am new to this forum and English is not my native language .
I dont know whether this is a proper section to post this kind of thread .
If this is in wrong section I request MODS to shift it to appropriate section .
This worked only for my AT&T HTC ONE X version , and its 100% confirmed .
I was searching for this solution from almost 3 weeks on XDA , and found that am not the only one . Many were having this problem .
Just update it to latest available firmware 4.0.4 which got released on 2-AUG-2012 .
My both cellphones which were unlocked and was on other networks . Was giving frequent signal drops , fluctuation , going complete DEAD
I flashed many radios and even the latest radio which was in 4.0.4 didnt work .
So I came into conclusion that flashing radio wont solve this problem , its only myth .
For updating/restoring it to latest 4.0.4 , Your phone bootloader should be locked . No problem if its rooted .
===========================================
1) Online update through phone itself
goto settings > AT&T software update > Check for updates
and follow the easy instructions .
===========================================
2) Manual update through computer
Make sure u have downloaded the HTC SYNC MANAGER and required HTC Drivers
http://www.htc.com/www/software/htc-sync-manager/
The below file size is 568MB , and its a executable .exe file .
After downloading open the file and follow the instructions . 30-35% battery is necessary to flash the ROM
Firmware official link:
LINK 1 : http://dl3.htc.com/application/htc_one_x_RUU_2.20.502.7_att_us_08022012.exe
LINK 2 : http://www.htc.com/us/support/htc-one-x-att/software-updates
===========================================
Now my both phones are working properly
===========================================
Am not responsible if anything happens during this process with your phone .
===========================================

I'm gonna try. Getting no LTE signal at home so total useless 4G LTE... I only get HSPA+

This should probably be deleted all together.

DvineLord said:
This should probably be deleted all together.
Click to expand...
Click to collapse
No. Just moved to General.

DvineLord said:
This should probably be deleted all together.
Click to expand...
Click to collapse
Agreed basically the OP is telling us to go back to stock OEM version of the OS.
2nd why are you posting this in the dev board?
It would be better to be in the Q&A section.
I haven't seen this as a widespread issue at all and certainly not one that I have experienced.

I can tell you that here in the Phoenix area that I get great reception, fantastic LTE speeds, and I am running the Telstra radio 223 with the stock new rom, unlocked and Boot loader unlocked

nephipower said:
Agreed basically the OP is telling us to go back to stock OEM version of the OS.
2nd why are you posting this in the dev board?
It would be better to be in the Q&A section.
I haven't seen this as a widespread issue at all and certainly not one that I have experienced.
Click to expand...
Click to collapse
I really dont know what is DEV exactly
DvineLord said:
This should probably be deleted all together.
Click to expand...
Click to collapse
If u had faced this signal issue problem when u buy a new phone , U will understand the value of the solution .
Pumpiron579 said:
I can tell you that here in the Phoenix area that I get great reception, fantastic LTE speeds, and I am running the Telstra radio 223 with the stock new rom, unlocked and Boot loader unlocked
Click to expand...
Click to collapse
What am trying to tell is , if signal issue is there with the phone and even after installing rom and flashing radios wont solve the issue . This the trick to make it work .
Mods kindly dont delete this , please move it to a correct location .
Many are still having this problem in there cellphone , I personally had two faulty phones
Mine also 900$ was stuck as phone were useless , its horrible if there is no network in the phone .

raghu135 said:
I really dont know what is DEV exactly
If u had faced this signal issue problem when u buy a new phone , U will understand the value of the solution .
What am trying to tell is , if signal issue is there with the phone and even after installing rom and flashing radios wont solve the issue . This the trick to make it work .
Mods kindly dont delete this , please move it to a correct location .
Many are still having this problem in there cellphone , I personally had two faulty phones
Mine also 900$ was stuck as phone were useless , its horrible if there is no network in the phone .
Click to expand...
Click to collapse
It seems better. Thanks for now.

If you don't know what a dev is you shouldnt post in development
Sent from my HTC One X using xda premium

Moved to General.

Needs moving to General in the right device forum, though

Thanks for moving the thread :good:

This isn't even in the right forum. This forum is for the International One X. NOT the AT&T One X. That has its own forum.
Sent from my HTC One X using xda app-developers app

Moved to proper section

Don't forget that if you don't have superCID when you do this, you will lose the ability to root until a root exploit for 2.20 is released.

Even i am having the same problem, i have download the ruu but my doubt is i have super cid111111 on my phone, so will ruu work perfectly or do i have to revert it back to stock cid? If yes then what is the procedure to revert back the stock cid?
Sorry for bad english as it is not my native language.

hemsmaverick said:
Even i am having the same problem, i have download the ruu but my doubt is i have super cid111111 on my phone, so will ruu work perfectly or do i have to revert it back to stock cid? If yes then what is the procedure to revert back the stock cid?
Sorry for bad english as it is not my native language.
Click to expand...
Click to collapse
Super cid allows you to flash any ruu as long as it is not a lower version ruu and hboot than you currently have. You should be warned that flashing the 2.20 ruu with the updated hboot will break the ability to flash boot.img radios and kernels from recovery. You will have to use fastboot from your pc to flash them.
Sent from my Noctirnalized One XL using Forum Runner

Thankx for the help, i am comfortable with comand prompt, have done flashing radio,system..img from fastboot on my desire hd earlier, but the question concern me now is after getting the new hboot will i be able to flash rom via fastboot even if the bootloader is locked, coz acording to my research still at&t has not given rights for unlocking bootloader, and also there is no root exploit yet????
Pls correct me if i am wrong nd help me wid the links if any of the above exploits have been come, Thanks allot.
Sorry 4 the Bad English, Its not my native language
Sent from my HTC One XL using xda app-developers app

Re: Solution for AT&T HTC ONE X Signal Dropping Issue / cellular network problem / da
I had the same problem with my HOX. Tried various roms and radios. Atlast I installed an application Network Signal Speed Booster and the problem was solved . Hope it might help to someone. Currently using a CM 10 based ROM.
Cheers!

triksense said:
I had the same problem with my HOX. Tried various roms and radios. Atlast I installed an application Network Signal Speed Booster and the problem was solved . Hope it might help to someone. Currently using a CM 10 based ROM.
Cheers!
Click to expand...
Click to collapse
I have had this problem for probably about 6months now, it's ridiculous. I have tried everything, Factory Reset, flashing stock RUU, everything, wipes, radios and custom ROMs, nothing seemed to work. When I flashed RUU, I think it was ok for a little while, but as time went on, I got more and more signal drops.
When I first read triksense's comment, I thought he had no idea what he was talking about, maybe he just had poor reception. Regardless, I was willing to try anything, so i installed the free version of Network Signal Booster from the Market. It has been 2 days now, and I have not had a single signal drop since running this app. It would be nice to not require a 3rd party app installed to make my phone run smoothly, especially an app that I don't really know what it is doing exactly.
Anyways, to anyone with this issue (are there really not more? Did they just give up and go to Samsung?), I am the second person now that can recommend this app, Network Speed Booster from the Market, to fix the signal drop issues.
Thanks for the suggestion triksense!

[Q] Sgh-t959/ galaxy s 4g

Hi i currently bought the SGH-T959W form mobilicity and I m wondering if anyone can help me with gaining the stock rom from it and also for installing coustom rom and stuff? I had tried rooted it with T959v instructions and it worked but right now i just getting it bak from Service centre so i m it will have the brand new phone.

victor536angle said:
Hi i currently bought the SGH-T959W form mobilicity and I m wondering if anyone can help me with gaining the stock rom from it and also for installing coustom rom and stuff? I had tried rooted it with T959v instructions and it worked but right now i just getting it bak from Service centre so i m it will have the brand new phone.
Click to expand...
Click to collapse
the next day or two I will have a "W" package available. don't do anything till then.

getochkn said:
the next day or two I will have a "W" package available. don't do anything till then.
Click to expand...
Click to collapse
Hi Getochkn,
I have the same issues as Victor.
Please let us know how to get the thing working back.
Thankyou
Kamalakar

kamalakarm said:
Hi Getochkn,
I have the same issues as Victor.
Please let us know how to get the thing working back.
Thankyou
Kamalakar
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=33275008

Thanks lumin30
Both of you, bug Mobilicity for a stock image to restore your phone. lol. Wind won't give me one but maybe Mobilicity will.
I can get it to about 90% stock right now and I'm sure I'll get it almost there. The problem is this. To dump the stock phone, we need it rooted to gain access but the only way to get root on 2.3.6 with the latest patches, is to flash a rooted kernel, which is great but then prevents us from dumping the stock kernel. It's a catch 22. Need a hacked kernel to dump the kernel but flashing the hacked kernel erases the stock kernel. lol.
The package linked by lumin30 will get you rooted, and all the options from there are explained.

tnx
tnx

Hi,
I will check with mobilicity and see what i can do to get the files from there. I really doubt if they would do it for us.
Meanwhile i am trying to get the files from someone who has a official unlocked phone purchased which is carrier free.
He hasn't tampered with it yet.
let me see what he can do for us.
Thanks