Hi All,
I'm hoping someone can help me. I tried another forum but never heard back. There are a couple of problems. I received an unlocked HP iPAQ 510 Voice Messenger for Christmas 2007. I can't find any information on fixing this or a fix for this.
When I am on the phone talking to someone, they can hear that I’ve received a message (voice, text, etc). They can hear reminder sounds and that I’ve missed calls. It just keeps on playing right out of the speaker. We just have to wait for it to play out. It doesn't matter if the call is on Normal, Outdoor, or Vibrate. The other party and I can still hear that a message or alert has come through. I did stumble onto an option under Settings>Accessibility. I can change the In-Call Alert Volume from 0-5. I won't hear the alert while on the phone if I set the profile to Silent or if I adjust the In-Call Alert Volume to 0. I would like a way to hear a regular beep and for the other caller to hear nothing. You know... as though I am using some other phone that works properly. I hate having to go back and forth changing my profiles. It must be HP related or something. My friend has an iMate sp5m and this doesn’t happen to them. We even compared our registries. I’ve not stumbled onto this in various forums.
Also, for incoming calls, I’ve chosen a ringer of my choice. When I answer the call, it stops playing this ringer sound immediately. I would like the same to happen for my messages. When I receive any type of text message, upon checking the message, the sound should cease. It is not doing this. How can this be fixed? Now after checking the forums, it seems that there is no real way to do this regardless of if it is Windows Mobile 5 or 6. However, I figured I'd ask or I could've missed something.
I chatted with HP a couple times and they had me do a master reset a few times. This didn’t help it. I called the repair number and they sent me another phone. I received the new HP iPAQ 510 today. It still has the same issue with playing tones while I am on the phone. Is there a registry value or something that I am missing?
I haven’t done much within the registry of this phone. I have completely unlocked the phone using SDA Application Unlock and changed a couple policy values.
Begging for help,
Shelli
Man
This Happens To all The Phones that use windows mobile it even happend on my htc typhoon , n my cousinz htc feeler oxygen and htc gene and my ipaq 514 the song or melody carries on til it ends you could try editing the sound and making it like 10sec s0 it Does n0t Play That l0ng as for hearing the sounds in the phone call try puting it on loadspeaker and taking it out see if dat helps
Thank you for your help
Thank you for your reply and confirmation on the text message issue. Also, I turned on the loudspeaker while on a call. I sent a message and took it off and sent one as well. We could still hear the tone. You mentioned that you have or had a 514. Does this issue I'm describing when on a call sound familiar to you? I may have HP send me a 514 (if there are less issues) or maybe I'll look at getting an HTC Touch Dual or a S730. Of course I'll have to research them more.
IV never n0tiCEd
Well Iv never Recieved a text message during a call so i dont knw rather get a touch dual it beta da HP
I asked this in the Raphael Software area, but I'm posting it here as it really isn't a software that someone made..
OK, I'm pretty sure BT worked on the phone. Now, any time I answer from a BT device, the incoming caller is muted. He can hear me, I can't hear him.
If I transfer the caller to the phone (which btw I can hear him on the phone) and back again to the BT device, I can then hear him. If I answer the incoming call from the phone buttons, I can hear the caller on my BT device.
I must've spent like 30 calls to my phone (I'm ticked as I'm sure each one counted on my minutes) thinking of different ways to fix this.
I thought it was my BT headset, but it works on my Tilt. So I tried it in my car BT. It can't hear the caller either. So something is wrong.
Here's how I COULD fix it:
If I turn off MS Voice Command "announce incoming calls" my phone itself will play my ringtone while I hear a beep tone in my BT earpiece. If I answer it form my headset, it works!
UPDATE:
I had my unit bloat free by following the "How to skip the bloat! (Fuze)" thread. I did another HARDREST and did the same bloatfree. Right off the bat, I synced my BT and I can't hear the incoming caller. Something is messed up.
One other person has this issue so far. Can anybody else check it? Voice Command is one of the best things there is for this phone. Just make sure its checked to announce incoming calls. Don't worry if you don't hear the incoming call being announced(you might hear a bell sound behind your normal ringtone) as thats a different issue you'll get untill you patch it. Just answer the call from the headset and see if you can hear the incoming caller.
Same Deal
I'm having the same problem. I just unchecked the 'announce incoming calls' and we'll see how that works. I'm on a work conference call so I can't try it till later.
it should work with it unchecked, but that defeats one of the best features on the voice command. Another thing, if you have ring&vibrate set, it you uncheck that feature, the phone will ring and vibrate. so other people around you will know your phone is ringing. In a library, I liked to use the announce feature because my ear piece would ring but the phone would only vibrate.
Here is what worked for me today -and I have been on the verge of sending the phone back to ATT...
1. I deleted all my pairings
2. I paired my JawBone2 first
3. Then, I paired my Plantronics A2DP thing (I had paired this one first before because I had it with me when the phone arrived in the office).
Funny thing: First time I paired my Plantronics 855 I got 2 options under "Advanced" at the end of the pairing procedure: 1. "Stereo Headset" 2. "Handsfree" I checked both. When I re-paired (after pairing with the JB2) I only got the "Stereo" option (which I checked). So now, all works fine. I can hear folks at the other end on either headset (actually, I have added a V1 as well) regardless of whether I or they initiated the call.
We'll see what the future brings here. But, for today, this is working.
I tried hard resets. Still no go.grrr... I dunno about you, but it just drains me to redo all my contracts and settings on the phone after every hardreset.
Hopefully your BT will stay working. Someone else here reported that it worked then stoped working after a while.
I have the same issue called HTC support last week and they where able to replicate this issue. If more people call HTC they may fix this problem faster.
I called ATT about it. Not aware. Of course they tried it and worked. It seems to be random on when it quits working. I know mine worked for a while. I just don't know what caused it to quit. And now that it did quit working, I can't get it to transmit the incoming caller to my BT. He can hear me though.
If it wasn't an hour job to restore it back to the way it was, I would hard reset it again. Tired to that at the moment.
I'm having the same issues on my Fuze. I unchecked 'announce incoming caller' and now it works just like my previous phone. My question is, what does announce incoming call actually do? Is it supposed to say who is calling through the bluetooth headset?
I too have this issue in my car (I haven't tried it yet with regular headsets, but I imagine the result would be the same). I have made the tweaks to the registry to get the Fuze to announce incoming calls, but the announcement is so soft, I can hardly hear it. I also have the issue of not being able to hear the person calling me (outgoing calls are fine).
I just did some experimenting and was wondering if others can duplicate this.
With Announce incoming calls on, when a call comes in and you answer it with the button on the headset (or the answer button in the car), you can't hear the person on the other end even though they can hear you.
Now try having an incoming call answered by hitting the Answer button on the phone itself (I only tried it with the on-screen Answer button, I didn't try it with the phone's hard button). You can now hear the person on the other end and they hear you. I was able to duplicate this numerous times.
Same issues...
With Announce Caller on in Voice Command, I cannot hear the caller if answering via the bluetooth headset. I'm not even sure it's is announcing the caller, but the custom ringtone is playing. If during the call you switch off the handsfree (via phone menu), then turn it back on, you can once again hear the caller.
If I turn off the Announce Caller function in Voice Command, I only get beeps in the headset, but I can hear the caller.
AT&T Fuze
Yes. I'll say the callers name if its in your contacts, or it'll say the phone number if it isn't. real helpful if you don't want to take out your phone.
DaRealGMan said:
I'm having the same issues on my Fuze. I unchecked 'announce incoming caller' and now it works just like my previous phone. My question is, what does announce incoming call actually do? Is it supposed to say who is calling through the bluetooth headset?
Click to expand...
Click to collapse
Err isn't that was I said in the original post? I mean about how its answering from the BT device that causes the incoming caller to be muted.
jglev said:
I too have this issue in my car (I haven't tried it yet with regular headsets, but I imagine the result would be the same). I have made the tweaks to the registry to get the Fuze to announce incoming calls, but the announcement is so soft, I can hardly hear it. I also have the issue of not being able to hear the person calling me (outgoing calls are fine).
I just did some experimenting and was wondering if others can duplicate this.
With Announce incoming calls on, when a call comes in and you answer it with the button on the headset (or the answer button in the car), you can't hear the person on the other end even though they can hear you.
Now try having an incoming call answered by hitting the Answer button on the phone itself (I only tried it with the on-screen Answer button, I didn't try it with the phone's hard button). You can now hear the person on the other end and they hear you. I was able to duplicate this numerous times.
Click to expand...
Click to collapse
Yup. That's the issue. It's only if you have VC to announce the incoming caller on, and you answer the the incoming call from the BT device.
DerralVL said:
With Announce Caller on in Voice Command, I cannot hear the caller if answering via the bluetooth headset. I'm not even sure it's is announcing the caller, but the custom ringtone is playing. If during the call you switch off the handsfree (via phone menu), then turn it back on, you can once again hear the caller.
If I turn off the Announce Caller function in Voice Command, I only get beeps in the headset, but I can hear the caller.
AT&T Fuze
Click to expand...
Click to collapse
starstreak said:
Yes. I'll say the callers name if its in your contacts, or it'll say the phone number if it isn't. real helpful if you don't want to take out your phone.
Click to expand...
Click to collapse
that's what I thought. But even when the announce option is checked, I don't hear anything except ringing on my bluetooth headset.
That's a different issue. But fixable. Do a search for microsoft voice command call announcement.
starstreak said:
I dunno about you, but it just drains me to redo all my contracts and settings on the phone after every hardreset.
Click to expand...
Click to collapse
Are you serious? Have you tried to back up your PIM info with the Sprite Backup that AT&T includes free on the phone? Or even sync it with your desktop?
Err yes. But when it didn't fix the BT issue, I had to hard reset. And resyncing to the computer takes a while, so is trying to redo all the edits you previously made before the issue happened that forced a hard reset.
motionmind said:
Are you serious? Have you tried to back up your PIM info with the Sprite Backup that AT&T includes free on the phone? Or even sync it with your desktop?
Click to expand...
Click to collapse
I just got off with HTC support as well. The other poster that talked to the guy that confirmed it. That tech said he could get it work on the phone itself but not using BT. They have sent some thing to MS to try and get a hotfix for it. Once they get it they will post under the support for the Fuze.
Right now no fix for it.
Does anyone know if there has been a fix to this? On my fuze if I make a call with by BT headset I can't hear the caller when they answer.
are you guys answering the phone on your handset or on your phone? because if you answer a call with bluetooth paired on your phone directly the sound will come out of the phone's earpiece. if you answer the call on your bluetooth headset's answer/hang up button then the sound will come through the headset.
Hi,
Having a weird issue: During a call, I cannot hear my counterpart, unless I am using the headset or put the call on speaker. The call can hear my without any issues.
Already stopped various apps and finally reset the whole device but the issue persists.
Appreciate any help.
Thanks!
Hey guys!
I’m using Samsung SM-G920FD already 2 years abt. running updated Android 7.0.
Got a following problem, Whenever I’m intended to make an outgoing call trying to call a friend of mine, my phone refuses to do so. It starts the process of call but freeze on stage of dialing picture mode and no beep tone or nothing is going on afterwards, as If I or the subscriber is offline. Although, the network signal level is at high and no any indications of malfunctions by phone are being shown.
Thus, the only fix solution I found I immediately restart my phone and only then can make/receive calls.
What could be the reason of such behavior and how to fix this annoying problem.
Thanking in you advance and looking forward to hear your solutions soonest.
Regards,
kozav100