Database Info

[q] help flashing freinds g1

I said I would flash cyanogenmod on a friends G1 because he was fed up with 1.6. I've flashed many custom ROM's on several different devices before but I've made a mess of things with this G1 and I can hardly hand back an unusable phone so I would really appreciate your help.
I rooted the phone using Androot, backed up the apps and settings using titanium backup and then the texts using a text backup app. I then downloaded Rom manager and flashed the latest clockworkmod recovery. Next I downloaded the latest official cyanogenmod rom for the dream/g1 and placed it on the phones SD card using my computer. I then re-opened rom manager and used it to select the zip file from the sd (to flash it) on prompt I checked two boxes one to wipe data and one to wipe the dalvik cache and pressed ok.
The phone rebooted into the recovery wiped the stuff, supposedly flashed the rom and rebooted. However it got stuck on the t-mobile g1 boot screen(it never showed anything else first or anything after) I left it for ages with no joy. I then tried wiping from the recovery and flashing again - same thing so i put cm5 on and tried flashing that. Same problem. Then i realised that it probably would not work because I would need to use DangerSPL as the /system partition is too small on the dream/g1. To be honest at this point I can't be bothered with to do that and this guy will be happy with anything above 1.6 to be honest so I thought I would try and flash CM4 because that's based on Eclair I believe (and so it not require I use DangerSPL or any other method to repartition the NAND). However, I tried it twice and still no luck.
At this point I'm somewhat panicking as I cannot seem to make the phone boot and it isn't even mine! Is anyone able to help?

Anyone? Please?
Look, at this stage I will forget custom roms etc. If anyone can tell me the easiest way to get this phone booting android again i would be very grateful.
Even if you could just tell me exactly how to restore it to stock 1.6 from here?
I have flashed roms on phones before - never had a problem but this is driving me crazy - please help!

wollac11 said:
Hi I said I would flash cyanogenmod on a friends G1 coz he was pissed off with 1.6 but im having trouble and I can hardly hand back an unusable phone so i really need your help.
I rooted the phone using Androot, backed up the apps and settings using titanium backup and then the texts using a text backup app. I then downloaded Rom manager and flashed the latest clockworkmod recovery. Next I downloaded the latest official cyanogenmod rom for the dream/g1 and placed it on the phones SD card using my computer. I then re-opened rom manager and used it to select the zip file from the sd (to flash it) on prompt I checked two boxes one to wipe data and one to wipe the dalvik cache and pressed ok.
The phone rebooted into the recovery wiped the stuff, supposedly flashed the rom and rebooted. However it got stuck on the t-mobile g1 boot screen(it never showed anything else first or anything after) I left it for ages with no joy. I then tried wiping from the recovery and flashing again - same thing so i put cm5 on and tried flashing that. Same problem. Then i realised that it probably would not work coz i would need to use DangerSPL coz the /system partition is too small on the dream/g1. Tbh i'm tired so I cba to do that and this guy is not that technical so he will be happy with anything above 1.6 so I thought I do CM4 coz thats 2.0 or 2.1 i seem to remember (and it not require I use DangerSPL) - tried it twice and still not luck.
HOW THE HELL CAN A GET THIS STUPID THING TO WORK AGAIN!??
MAJOR PANIC AS THIS IS NOT MY PHONE - PLEASE HELP!!!
Click to expand...
Click to collapse
Try this thread: http://forum.xda-developers.com/showthread.php?t=803482. I hope it helps.

It's been way too long since I rooted mine to be of any real help but I shall try nonetheless.
Firstly, there is a guide in the G1 forum to unroot and get back to stock firmware: Here (but note that I've never done this).
I must stress though (admittedly from memory) that if you have flashed an SPL or radio image at all, be VERY careful about the order in which you revert back to stock (or go to get a custom ROM depending on which way you decide to go). The G1 is very picky, and flashing things (mostly SPL and radio IIRC) in the wrong order will brick the device. That said, if you follow the instructions you find to the letter you should be OK. But yeah, read twice, flash once.
There is a lot of information in the stickies in the G1 forum. It could take a while to wade through but it should all be there. Failing that, post in the Q&A or General G1 subforums and I'm sure a current user will help you out.
I apologise if I've just posted a bunch of stuff you already know/have read - like I said, I've not used the phone in a while - just trying to offer what I can.

Thanks
No worries now guys i've done it! It was quite complicated but its all sorted now. If anyone is trying this and has the same (or similar) issue then pm me and I will tell you how I sorted it.
Otherwise thanks guys and you can conciser this thread:
---------------------closed--------------------------

[OLD] Outdated MIUI Thread

UPDATE: This ROM is now outdated. Please use Dfgas's newer MIUI port, located here:
http://forum.xda-developers.com/showthread.php?t=1152518
Original Post:
You've watched. You've waited. You've sat impatiently looking for an update. I know I have. The wait is over.
Gingerbread AOSP MIUI 1.6.24 MTD Port
Ported to: Mesmerize (still having issues with Showcase port)
Please note: The 1.6.24 links currently posted are not my work! I just couldn't correct the eri.xml in framework-res.apk to remove "Verizon Wireless" from the top bar (cosmetic I know, but it bugged me--I'm picky like that), and... BDE sorta had his port done several hours before mine anyway. I can't take any credit whatsoever for these links, this is all his porting work.
WARNING: READ BEFORE FLASHING!!
This ROM was designed using the newer (for us) yaffs2/ext4 filesystem. Excepting CM7MTD, no other ROM uses this filesystem. As a result, this ROM uses CWM 4, and once you flash, you CANNOT flash any other ROM from Recovery. Should you have issues with the flash, or want to return to a different non-MTD ROM, you will need to Odin all the way back to stock. See post #2 for instructions.
SHOWCASE USERS: This is especially critical for Showcase users, as Cell South has prevented Odin flashing packages for the Showcase. IF YOU USE A CELLSOUTH SHOWCASE AND WANT TO FLASH BACK TO A DIFFERENT ROM, FIND A WORKING ODIN PACKAGE FIRST.
As always, the standard warning applies: I am not responsible for what may happen to your phone as a result of flashing this ROM, properly or improperly. No warranty whatsoever. You have been warned.
Credits
The biggest thanks go out to jt1134. NONE of this (including CM7MTD) would be possible if it weren't for the work he's done for the Fascinate, Mesmerize, and Showcase.
Andmer has also been critical to making this happen. He was the one to take JT's work, use his AOSP source, and build a working MIUI port for the Fascinate. Both he and JT continue to modify the ROMs and Kernels for MTD that we enjoy to work towards getting that hardware working.
Without these guys, there would be no port for us.
I'd like to thank lmartin92 for his tremendous help and knowledge. He worked tirelessly with me to get this working. Similarly, bdemartino has been a huge help in all around, as well specifically making sure we could get the "fascinatemtd" SMS padding code implemented into CM7MTD, and therefore MIUI MTD. Lastly, I'd like to thank Akellar for getting some Framework-res cosmetic edits working when I could not.
1.6.24 Note: Again, these are actually BDE's ports, not mine, I can't take any credit.
ROM Details
Update Schedule: MIUI receives weekly official updates, and Andmer has said he intends to port them to the Fascinate on that same schedule. I intend to port from his work on that same schedule, and once my overlay is fully worked out, it should take me only as long as it takes to apply it and upload. This thread will be updated every time a new ROM is released. I'll try to keep one or two previous week's ROM links just in case.
Radio: This ROM does not flash a radio, so it should use whatever radio you had before you flashed. This ROM is built for a Mesmerize/Showcase radio (making it an actual Mesmerize port), so if you're using the Fascinate EC01 radio, you'll want to either flash the EC10 or EE19 radios (typically by flashing the stock versions of those ROMs). Don't worry if you flash those ROMs; everything else (except the radio) will get overwritten.
Recovery: In order to support the yaffs2/ext4 filesystem, this ROM uses CWM 4. As a result, the normal "three finger Recovery" method does not work. Similarly, although the ROM includes a "Reboot into Recovery" menu option after holding power, that does not boot into recovery. The only method of getting into recovery at this point is to either use ADB or a Terminal Emulator app.
Within Terminal Emulator, type the bolded, underlined text:
su (enter; this grants SuperUser rights to Terminal Emulator)
reboot recovery (enter)
This should properly reboot the phone into Recovery mode.
Working:
Calls
Bluetooth!!
3G / Data
WiFi
SMS
Camera/Camcorder!!
USB mass storage / sdcard
GPS
ALL Sensors!!
Not Working/Known Issues:
MMS
Calls/SMS during deep sleep mode are not waking up the device to ring.
This app will prevent your device from deep sleep which is of course a battery drain, but you will receive calls. Whether its worth it or not is up to you.
https://market.android.com/details?id=otis8.softlocker
How to Flash
Copy the ROM to your SDcard.
Reboot phone into recovery, flash ROM as normal.
Make sure to wipe data, cache, and dalvik cache if you are coming from a non-MTD ROM, and possibly even CM7MTD.
Flash MIUI ROM from SD card.
The "MIUI" branded flash script will appear, and quickly disappear. THIS IS NORMAL. This verifies if CWM 4 is installed (on the first time through it will not be), and if not, installs it. The phone should reboot once again into recovery, but it will be standard CWM 4 Orange recovery.
Flash the ROM from your SD card once more. Note that the softkeys have changed; use the Search key as "Enter". The flash should proceed as normal.
1.6.24.1: Flash the 1.6.24.1 patch to correct all sensors.
Reboot phone when complete.
When your phone reboots, you should see the normal Samsung logo, and then a Galaxy S/CyanogenMod 7 logo. This will be followed by the MIUI.us boot screen, which is a moving starfield with a spinning globe.
Welcome to GB MIUI!
Mesmerize Download
http://olvisfoundation.com/xdadump/bdemartino/ROMS/MIUI/MIUI.us_mesmerize_1.6.24.1_Eng_Deo_ZipA_Signed_0627.zip
Showcase Download
((Still broken))
1.6.24.1 Patch Download - Fixes ALL sensors! (for both Mesmerize and Showcase, once later is released)
http://olvisfoundation.com/xdadump/bdemartino/ROMS/MIUI/MIUI.us_patch.zip

HOW TO GO BACK TO NON-MTD ROMS
Kanged from the Fascinate forums with immense thanks to kidserious, and referencing the "Files to get your Mesmerize back to stock 2.1 and 2.2.1" guide from Phidelt82
Things you'll need:
Odin
Working Odin package for your phone model
If you don't already have these, here are some links (sorry, Mesmerize stock ROM only):
Odin: http://download1422.mediafire.com/ii578172dylg/429fcpdtpckkcea/Odin3+v1.83.exe
EC10 Odin Package: http://www.megaupload.com/?d=N6JNT1ZE
Whatever Odin package you use must have a full bootloader included in the flash. EC10 should work, EE19 may not. I'm unable to advise which Showcase Odin package would work, I'm not familiar enough and they're not generally available.
STEP-BY-STEP
I'm writing these for the Odin newbie in mind. Experts, as long as you check "Repartition", you know the drill.
Open Odin. This does not need to be installed, simply run.
Pull off the back from your phone, remove the battery.
Connect the USB cable (best with the Samsung one that came with your phone), and hold Volume Down until you see the phone say "Download Mode". A little box should turn Yellow in Odin, signifying it detects the phone and is ready to flash it.
Click the PIT button. Locate the path to the PIT file extracted from the ZIP you downloaded above (or previously) to populate that field.
Click on the PDA button. Locate the path to the TAR.MD5 file extracted from the ZIP you downloaded above (of previously) to populate that field. Do NOT click on PHONE, Phone should be empty.
Make sure Re-Partition is checked. We want to overwrite the previous MIUI flash, and Re-Partition is what lets us do that fully.
Click the Start button. Let it proceed through the whole flashing process, which is approximately 10 minutes. You'll see "Complete!" in Odin and your phone's screen will go blank once it's finished.
For thoroughness' sake, I'm including the below steps. Again, experts could potentially circumvent, but below is the failsafe way.
Re-insert battery, boot phone. Allow it to boot into Blue (stock) recovery. it's okay if it says it can't mount "HIDDENSDCARD"; it's done the rest of the setup it needs to. If you're just staying with the stock ROM and recovery, you're done.
If you want a custom recovery:
Follow steps 1-7 above, skipping over step 4 (no PIT file needed), and flash your recovery of choice. You should now be able to flash whichever custom ROM you were on before, or restore from a Nandroid backup.
It is absolutely mandatory that you follow these steps exactly to properly get off of GB MIUI MTD (or CM7MTD for that matter) so that you can flash another ROM. Attempting another method or not following these steps implicitly will result in a bricked phone and you will have to follow this guide to fix it.

#3 reserved for me also.

Good for you man. Way to go!!!!!!
Tap-a-Talked from my Mesmerize

is there anyway u could port the cm7 releases to id really love to be running cm7 instead of having to flash fascinate radios and all tht crap..

Outstanding.

I'd love to test on my showcase. I have everything I need to go back via odin, and this is the rom I've been waiting for.

Congrats man, I know how much time/effort you put into this!
Sent from my SCH-I500 using XDA App

O and thx my pants are wet now good rom
Sent from my SCH-I500 using XDA App

hold of on tht keeps boot looping on the miui bootupscreen any thoughts?

I got the same thing, but I think it's because I forgot to wipe data/cache/whatever... So I'm trying again.
Edit:
Yeah, it's just looping the spash.

Im also getting boot loop. Im on the ee19 radio, should i do the 10 and retry it?

i tryed both and it bootlooped

godofwar762 said:
i tryed both and it bootlooped
Click to expand...
Click to collapse
That makes me very worried about flashing this.. I was just going to do it.

I wonder if flashing to the cm7 then trying to flash this would work better. Using the cm7 you can use rom manager to install the miui, so im gonna try that.
Edit: Unfortunately same thing that route also. Boot loop

That's what I came from, then the second time I went from the latest offical froyo.

seishuku said:
That's what I came from, then the second time I went from the latest offical froyo.
Click to expand...
Click to collapse
With no issues?

It did the same thing.

Well imma go try it ill report back when I'm done.

Are you guys flashing the Rom twice like the op says to?
Sent from my SCH-I500 using XDA App

MIUI 2.3.5 1.9.23 - No soft keys after succesfull flash

Appologies for not replying to the original MIUI thread. I am not a new user and i am very experienced in flashing roms etc, especially on samsung devices. I have been around for a while now but this is my first post so i cannot post in the dev section yet.
Last night i flashed MIUI to my infuse. I followed the instructions in the op here exactly.
http://forum.xda-developers.com/showthread.php?t=1278053
I had no problems flashing and everything was successfull, however there were 2 major issues. First being the soft keys. The four buttons menu, home, back, and search buttons did not function at all. They werent even backlit. The volume rocker and power buttons functioned fine. I reflashed from blue cwm twice and still nothing.
This is where i ran into my second issue. There were no posts about anyone having the soft key issue however i did notice alot of people losing their recover and being stuck on the samsung boot screen. This eventually happened to me.
I went to samfirmware and downloaded 2.1 and odin'd it, then odin'd the community kernel to get ext4 and red cwm then restored my nandroid so i am back to normal. I wanted to post about my soft key issue but as i said i had to post in q&a due to my lack of posts.
Any suggestions? if not, i at least wanted to inform the dev of the issue.
Thanks

have you tired CM7, just asking cuz they have almost the same bugs....so i would curious to see if your softkey issue transfers to that rom as well. and if not........
i would try loading up CM7, wiping from the orange CWM and flashing MiUi from there. it Should have worked the way you did itk if you were coming from stock. but who knows maybe seeing if it happens on Cm7 will lead to your answer.
just an idea though

no i havent been able to try cm7 yet as i dont have a build environment set up anymore and havent seen a release yet, would love to give it a shot if someone wants to send me a zip.
i really hope it doesnt have the same issue or ill have to donate this thing to my fiance and get a gs2 or something lol.

Check your mail, you seem to know what your doing so test it out see what happens.
Happy Flashing

Happy flashing indeed, thanks for this im going to give it a go right now, bbl with results.
Hell the only reason i was flashing miui to begin with is b/c i am currently unable to build cm7 so hope this works..
Thanks a ton!!

Ok so heres how it went down.
After my fail last night with the softkeys i did a little research and flashed serendipity s7. So with the cm7 zip you sent me i started out flashing over this since they are both ext4 i didnt think there would be a prob.
Followed your instructions, wipe, flash, pull battery, wipe, flash. After the first flash i was in orange cwm. I didnt give it a chance to boot until after the second flash obviously, but it would boot directly into orange cwm everytime.
From there i decided to odin to stock and flash the community kernel again.
Now that i was back in red cwm and formatted to ext4 i repeated your original instructions and everything flashed just fine.
As far as the soft keys, i have no issues at all. Everything is working just fine.
I was flashing from 2.1 uke3 last night, and thats also what i flashed with tonight and was successfull with.
Anyways thanks for the help glad to say im not having the issue with cm7. much appreciated
--forgot to add i am going to try to reflash miui coming from cm7 and see how that goes if i still get the same issue
--Okay, booted to orange cwm, wiped and flashed the same miui zip as before. Only one wipe and one flash no battery pull or anything. Everything flashed perfectly and my soft keys are functional. Not quite sure what the deal was before but miui is booting just fine. I'm afraid to boot recovery to many times as everyone seems to lose it after a few uses. We'll see how it goes for now, never been an miui fan to iphoneish for my taste but until i can build a recent cm7 rom i need something, was getting bored with rooted stock.
Thanks again for your help!

powdered_donuts said:
Ok so heres how it went down.
After my fail last night with the softkeys i did a little research and flashed serendipity s7. So with the cm7 zip you sent me i started out flashing over this since they are both ext4 i didnt think there would be a prob.
Followed your instructions, wipe, flash, pull battery, wipe, flash. After the first flash i was in orange cwm. I didnt give it a chance to boot until after the second flash obviously, but it would boot directly into orange cwm everytime.
From there i decided to odin to stock and flash the community kernel again.
Now that i was back in red cwm and formatted to ext4 i repeated your original instructions and everything flashed just fine.
As far as the soft keys, i have no issues at all. Everything is working just fine.
I was flashing from 2.1 uke3 last night, and thats also what i flashed with tonight and was successfull with.
Anyways thanks for the help glad to say im not having the issue with cm7. much appreciated
--forgot to add i am going to try to reflash miui coming from cm7 and see how that goes if i still get the same issue
--Okay, booted to orange cwm, wiped and flashed the same miui zip as before. Only one wipe and one flash no battery pull or anything. Everything flashed perfectly and my soft keys are functional. Not quite sure what the deal was before but miui is booting just fine. I'm afraid to boot recovery to many times as everyone seems to lose it after a few uses. We'll see how it goes for now, never been an miui fan to iphoneish for my taste but until i can build a recent cm7 rom i need something, was getting bored with rooted stock.
Thanks again for your help!
Click to expand...
Click to collapse
Glad it all worked out.....

[Q] Darn boot problems, MIUI on Samsung Infuse

Forgive the title, I need it to make it interesting to get some views. Now that's said, let me get to it.
I recently tried to flash MIUI onto my Samsung Infuse. I had Infused ROM v.2.2.3. I must have messed up because now I'm having trouble getting my phone to start. When I power on, it briefly shows the Samsung logo (for about 3 sec); then for split second an alternate screen flashes on my screen just before my phone shuts off. Now, I've tried to load CWM(red version) with the 2/3 button technique; however, I haven't been able to get into that GUI.
I have been able to get into the Download screen, for Odin. But, I was hoping there might be some sort of way to solve this problem without resetting my phone to stock.
Questions
1. Can I utilize the Download screen to re-implement or re-flash my ROMs on my phone; without loosing data
2. Is there a way that I can force my way into the CWM GUI?
3 If none of the above are possible, where can I get information Odin for the Infuse; and where can I download the program?
Thank you for reading, and thanks for the help in advance!
Joaquin

I wasn't going to reply to your thread but you caught me in a good mood. head over to the dev forum and you will find everything you need to get your phone back. That's all I'm goin to give you. the more you search and experiment the more you will learn

Already found somethings that are helping...
I didn't post for as a resource, just thought that if someone knew where to look they'd point me in the right place.
For anyone who might need a nudge; this link will direct you to complete recovery http://forum.xda-developers.com/showthread.php?t=1092021

Did you follow the directions exactly as it says? Did you ever get into blue cwm and flash miui a second time?
Sent from my SGH-I997

I wouldn't recommend MIUI to anyone who isn't atleast a little experienced in flashing ROMs, and are sure won't panic if they find their system soft bricked.

went to http://galnetmiui.co.uk/landing/weekly-builds/ downloaded infuse rom using miui build 112230 wiped data,cache,dalvik applied installed galnet miui rebooted does not load stays on samsung logo wiped data,cache,dalvik reinstalled galnet does not work, used blue cwm, returned phone to stock froyo, using odin reinstalled galnet using green cwm, still doesnt work, dont know what im doing wrong, please help, do i need to install gb bootloaders?
Sent from my SGH-I997 using xda premium

[HELP] Splash Screen Bootloop, Heimdall One-Click doesn't work

A few more things you should know before I get into it. First off, this is my mother's phone, and about two days ago, she went to unplug and use her SGS4G after it had been charging overnight, and it wouldn't respond to the Power/Lock Button (It appeared simply stuck). So, naturally, she did a battery pull on it, and tried to turn it back on. After she hit the Power Button though, the Splash came up like it normally does, except instead of progressing with booting, the screen went black for a second and then went back to the Splash and it did/does this indefinitely (An obvious sign of a Bootloop).
Now. What doesn't make sense to me is that this was running the Stock ROM (I don't know if it was Froyo or Gingerbread), yet this still happened. I haven't tampered with the Phone at all, and my mother isn't too fond of the idea of Rooting, so unless the previous owner (Yes, it is a used phone) tampered with it and then restored it to Stock, then I have no idea.
Things I have tried:
Heimdall One-Click For Dummies (With and Without flashing Bootloaders)
Juls317's Noob Guide's "Potential Problems" section (With both Heimdall and ODIN)
A few Kernels (bhundven's Kernel, drhonk's KG4 Kernel)
sygee's ODIN/Heimdall Flashable ROM
hailthetheif's Step by Step Rooting Thread
Also, after I flash anything, whether it be with ODIN or Hiemdall Suite, or Hiemdall's One-Click, if I leave the phone plugged into the computer afterward, it will go to the Splash Screen and then to the Battery Screen (Which doesn't work, it just freezes with the Loading Wheel) and it'll Bootloop with the Battery Screen. If I unplug it after Flashing, it goes back to the classic Splash Bootloop that has been happening since Day 1. It doesn't even get past the Kernel.
I know that at least the Kernel and the Bootloaders can be Flashed however, by how they act on the Device. For example, if I flash certain Gingerbread Bootloaders, I can only get into Download Mode with PWR + VOL-, whereas on the Froyo Bootloader (Includes Stock), you use VOL+ + VOL-. With the Kernel, for example, if I flash a TeamAcid Kernel, their Logo comes up on the Splash Screen, but it still does the Splash Bootloop no matter what.
One final thing, if I flash a Kernel/ROM that includes a Recovery Mode, I can't access it at all (PWR + VOL+). I couldn't/can't access the Stock Recovery at all either.

One final thing, if I flash a Kernel/ROM that includes a Recovery Mode, I can't access it at all (PWR + VOL+). I couldn't/can't access the Stock Recovery at all either.
Pull the battery, hold power& both volumes, drop the battery back in. Should bring you to recovery (gb, not sure, can't remember froyo same or not). Wipe data & cache etc.
On the heimdell, awesome threads that you quoted. Follow directions and it should get you there. Kj6.. you may have to flash it twice to get the bootloaders for gb(it's setup that way so you can't fubar it without trying really hard). You would have to check the load boot loader box on second flash.

I just had this same exact issue. No matter what I flashed, it wouldn't work. Just kept with the boot loop. Now the difference with my issue was, I was still able to get into CWM and/or Download mode. (I was running custom rom). Heimdall wouldn't work for me because it was a driver issue. Odin, well, all the links I found for Odin were dead..
Anyway, when you're working with Heimdall, does it recognize your phone and flash? I had to flash it over twice for it to get to work. It is possible she was on Froyo and you're trying to flash it over with a GB stock rom could be causing an issue. Someone correct me if I'm wrong.
I'd say try sourcing a Heimdall to Stock Froyo ROM and see what happens from there.
This thread helped me out the most:
http://forum.xda-developers.com/showthread.php?t=2042927&highlight=frozen+at+boot

LiangChi said:
I just had this same exact issue. No matter what I flashed, it wouldn't work. Just kept with the boot loop. Now the difference with my issue was, I was still able to get into CWM and/or Download mode. (I was running custom rom). Heimdall wouldn't work for me because it was a driver issue. Odin, well, all the links I found for Odin were dead..
Anyway, when you're working with Heimdall, does it recognize your phone and flash? I had to flash it over twice for it to get to work. It is possible she was on Froyo and you're trying to flash it over with a GB stock rom could be causing an issue. Someone correct me if I'm wrong.
I'd say try sourcing a Heimdall to Stock Froyo ROM and see what happens from there.
This thread helped me out the most:
http://forum.xda-developers.com/showthread.php?t=2042927&highlight=frozen+at+boot
Click to expand...
Click to collapse
It does recognize the phone, and it does Flash (As far as I know). I used Zadig, so there shouldn't be an Driver problems. I flashed it several times with a lot of different things, however, I just now flashed it twice with the Heimdall One-Click again to see if that made any difference. It did not. I'm still stuck in that Splash Bootloop.
Also, what did you mean by, "I'd say try sourcing a Heimdall to Stock Froyo ROM and see what happens from there."? I haven't ever seen that suggested anywhere, and I have no idea where I would find a Stock Froyo ROM that is flashable via Heimdall.

Able to get in to recovery and wipe? Wipe data & caches. Got cwm? Which one click? Eilleo(sorry for the spelling) put out a one click that was to be used as stepping stone to ics only.

WinterPhoenix96 said:
It does recognize the phone, and it does Flash (As far as I know). I used Zadig, so there shouldn't be an Driver problems. I flashed it several times with a lot of different things, however, I just now flashed it twice with the Heimdall One-Click again to see if that made any difference. It did not. I'm still stuck in that Splash Bootloop.
Also, what did you mean by, "I'd say try sourcing a Heimdall to Stock Froyo ROM and see what happens from there."? I haven't ever seen that suggested anywhere, and I have no idea where I would find a Stock Froyo ROM that is flashable via Heimdall.
Click to expand...
Click to collapse
I'm honestly not to sure if a Froyo ROM for Heimdall exists. I do believe seeing one for Odin, though. Not sure if that link is still alive. I'll see if I can find it again.

We do have a Froyo One-Click but if KJ6 One-Click is not working for him I do not know why you think the Froyo One-Click will.

lumin30 said:
We do have a Froyo One-Click but if KJ6 One-Click is not working for him I do not know why you think the Froyo One-Click will.
Click to expand...
Click to collapse
I figured if the phone was still running on the Stock Froyo when this happened, that it may work as opposed to forcing the phone to accept a new ROM while it's still clashing with itself.
It's worth a shot at this point.

Stuck on Froyo
LiangChi said:
I figured if the phone was still running on the Stock Froyo when this happened, that it may work as opposed to forcing the phone to accept a new ROM while it's still clashing with itself.
It's worth a shot at this point.
Click to expand...
Click to collapse
I hate to hijack this thread but it describes my current situation and symptoms perfectly and I never saw a conclusion / fix.....
I just got a used phone from ebay (verified SGH-T959V in battery compartment) and have run into the same exact problems described in the start of this posting. Phone was running Froyo and I attempted to upgrade to Gingerbread with Heimdall One-Clicks. I was actually successful at one point but then it crashed when I tried to install boot loaders to get rid of rainbow screen at startup.
Now all I ever get is a splash screen bootloop whenever I try any of the Heimdall One-Click gingerbread variants. I have also tried Odin and the Gremlin remover with same results of splash screen bootloop (Linda always completes). I was however able to access the new kernel CWM recovery and try to flash other gingerbread ROMs - splash screen bootloops on all attempts.
So I gave up on Gingerbread and tried using CWM recovery from gingerbread ROMS to install CM9 / CM10 / Slim Bean. I was able to upgrade almost perfectly but had same problem for each one of these. Not the bootloop thankfully but instead the headphone speaker (if that is the right description) doesn't work. No sound for phone touchpad, screen selections, and when receiving a phone call (have to switch to speaker phone as back/big speaker works or plugin headset to hear whoever was calling).
All of the other features were great but I really needed to be able to use my phone as a phone! The Heimdall One-Click worked to return me to Gingerbread with same problem of splash screen bootloop (gets to pink welcome letters every once in a while). Then I used the Heimdall One-Click for Froyo (as suggested by LiangChi) and got a perfectly working version of Froyo.
Used Froyo CWM recovery to switch to ICBINB ROM which works fairly decently.... Am I doomed to stay at Froyo though? I tried to follow all of the guides to a T but not sure what I might be doing wrong or if I might have purchased a damaged phone - can't recall ever testing camera and it still doesn't work on current stable Froyo. At various points I tried different cables, SD cards, USB ports, removing/reinstalling drivers, etc... Even tried Kies when I got back to stock Froyo to upgrade - went to Splash Screen Bootloop!

You have so much info here... let's see what we can figure out.
grovernyc said:
I hate to hijack this thread but it describes my current situation and symptoms perfectly and I never saw a conclusion / fix.....
I just got a used phone from ebay (verified SGH-T959V in battery compartment) and have run into the same exact problems described in the start of this posting. Phone was running Froyo and I attempted to upgrade to Gingerbread with Heimdall One-Clicks. I was actually successful at one point but then it crashed when I tried to install boot loaders to get rid of rainbow screen at startup.
Now all I ever get is a splash screen bootloop whenever I try any of the Heimdall One-Click gingerbread variants. I have also tried Odin and the Gremlin remover with same results of splash screen bootloop (Linda always completes). I was however able to access the new kernel CWM recovery and try to flash other gingerbread ROMs - splash screen bootloops on all attempts.
Ok... when you flash the "stock" rom... have you tried to wipe cache, data etc???
Are you letting it boot up before appling any of the kernels??
So I gave up on Gingerbread and tried using CWM recovery from gingerbread ROMS to install CM9 / CM10 / Slim Bean. I was able to upgrade almost perfectly but had same problem for each one of these. Not the bootloop thankfully but instead the headphone speaker (if that is the right description) doesn't work. No sound for phone touchpad, screen selections, and when receiving a phone call (have to switch to speaker phone as back/big speaker works or plugin headset to hear whoever was calling).
All of the other features were great but I really needed to be able to use my phone as a phone! The Heimdall One-Click worked to return me to Gingerbread with same problem of splash screen bootloop (gets to pink welcome letters every once in a while). Then I used the Heimdall One-Click for Froyo (as suggested by LiangChi) and got a perfectly working version of Froyo.
Try wiping data and such, still bootlooping??
Used Froyo CWM recovery to switch to ICBINB ROM which works fairly decently.... Am I doomed to stay at Froyo though? I tried to follow all of the guides to a T but not sure what I might be doing wrong or if I might have purchased a damaged phone - can't recall ever testing camera and it still doesn't work on current stable Froyo. At various points I tried different cables, SD cards, USB ports, removing/reinstalling drivers, etc... Even tried Kies when I got back to stock Froyo to upgrade - went to Splash Screen Bootloop!
Click to expand...
Click to collapse
nope, it sounds like dirty flashes to me...
I would start with entering cwm and disabling lagfix & wiping data & caches.... linda needs to do her thing after the first boot up...
Then, I would reflash the germlin remover, If I remember correctly, you will have to do this twice (second time will allow you to check the add bootloaders)...
After the phone hits the think-pink, then you can battery dump, reenter download and flash the kernel.

Dirty Flashing
Champ - I think you might be on to something...haven't read about dirty flashing but it sounds right. I have been wiping data and caches (even tired reformatting system with a few roms). I do remember running into problems trying to following a few instructions sets that asked to disable the voodoo lagfix - hit option it just doesn't disable. After hitting disable see below Voodoo lagfix is actually: enabled next boot: disabled but even if I reboot back to CWM it is still enabled.
I might try the Odin Gremlin remover again. I was just getting frustrated after several days of failed upgrades. Second opinion on if it might be hardware/memory vs user error. I really didn't understand why even Kies (which everyone disparages) upgrade from stock Froyo also caused same loop.
champ1919 said:
You have so much info here... let's see what we can figure out.
nope, it sounds like dirty flashes to me...
I would start with entering cwm and disabling lagfix & wiping data & caches.... linda needs to do her thing after the first boot up...
Then, I would reflash the germlin remover, If I remember correctly, you will have to do this twice (second time will allow you to check the add bootloaders)...
After the phone hits the think-pink, then you can battery dump, reenter download and flash the kernel.
Click to expand...
Click to collapse

Retry the gremlim remover. Redownload it incase of a bad download.
Lumin30 has a good guide in his signature for the heimdall one clicks.
I use Odin, I have used his one clicks without problems though.
http://forum.xda-developers.com/showthread.php?t=1470716
Sent from my SGH-T959V using xda app-developers app