Database Info

Simple guide to flash android on Nand

12/08/2010 Updated with fix permission
TO ALL PEOPLE:
PLEASE STOP POSTING IN THIS TOPIC ABOUT "THIS PART DOESN'T WORK ECC ECC" WRITE IN THE TOPIC OF THE RELEASE (KERNEL OR SYSTEM), PLEASE LOOK IN THIS THREAD FOR WORKING SETUPS AND TRICKS, AND SEARCH ON THE FORUM BEFORE POSTING!
This method erase all data on your system and you can brick you phone so do it carefully.
Main problem: screen
For polaris there are 3 type of screen. Usually pola100 (the old one) use panel 1, and pola 200 (09 edition) has panel 3 but ... not always works...
The best mode to test is try to install and after double reboot you have black screen change panel type.
What you need:
phone (with hardspl installed)
sd card (1 Gb or more)
time
python
Update guide: http://sourceforge.net/apps/trac/androidhtc/wiki/HowToInstallWithAtoolsNand
important said:
if you have black screen:
reset the device and edit the pannel (E)
with onother type (1,2,3) and retry.
Click to expand...
Click to collapse
For androidinstall.tar e nbh look in this thread for working setups. (Choose Eclair or Froyo, Donut as problems with new kernel)
You can flash back windows (using your preferred method), if you need, but it's a shame!

Reserved by me

good
nice going l1q1d.
Make this also sticky.
can you add how to change panel 1 to 3 or vice versa?
There are som nbh file that only come out as panel 3

can you add how to change panel 1 to 3 or vice versa?
There are som nbh file that only come out as panel 3
Click to expand...
Click to collapse
You just Download NBH Editor and select the NBH with panel 3.
Then you will see that you can choose from whatever panel you would like, save and copy on SD

sorry for my english.
good guide.
I installed everything ok android
now if I wanted to update the radio?
ho installato android tutto ok
ora se volessi aggiornare la RADIO ?

Download radio update.
rename it to POLAIMG.nbh and put in sd
start with camera button pressed
push power button when asked
restart
you have successfully update the radio

ok. perfect.
tanks : )

HTC Polaris 100 - doesn't flash
I followed you instructions exactly as you wrote them. BUt it doesn't work.
When I power on the device with camera button pressed I see the 3 color boot screen- but that is it. At this point the screen says "Loading" and nothing else happens.
What am I doing wrong?
I have been using the Haret version of Froyo and think it is great, but wanted to go the NAND route. I am hoping it will perform better.
Thanks for your help

Re-download the nbh and retry, maybe is corrupted..

A little help
Hi,
It's been a while since i posted but I'm trying to flash to the NAND but must be a little out of touch as I get blocked at an Error
on the micro SD card I put
\POLAIMG.NBH (renamed from POLAIMG-PANEL1-320-FROYO.NBH
in the \andboot
install-seq.sh
androidinstall.tar (which is not easy to find but I managed
I followed your guide http://forum.xda-developers.com/showthread.php?t=725604
but the bootlog.txt stops at these errors;
...
....
Script finished
sh: 0: unknown operand
mount: mounting /dev/block/mtdblock2 on /system failed: Invalid argument
mount: mounting /dev/block/mtdblock3 on /data failed: Invalid argument
mount: mounting /data/tmpcache on /cache failed: Invalid argument
mount: mounting /data/shared_prefs on /shared_prefs failed: Invalid argument
mount: mounting /data/tmpcache on /tmp failed: Invalid argument
mount: mounting /data/sysfiles/su on /system/bin/su failed: No such file or directory
mount: mounting /data/sysfiles/su on /system/xbin/su failed: No such file or directory
mount: mounting /data/sysfiles/su on /bin/su failed: Invalid argument
mount: mounting /data/sysfiles on /system/etc/ppp failed: No such file or directory
mount: mounting /data/sysfiles on /smodem failed: Invalid argument
I am doing something wrong ???
Thanks for any help
Richard

It's very strange, try another time..
(remember that install-seq disable automatically if install procedure works without problems)
there only these errors? are there any "Failed to format"?

Indeed the install-seq did get renamed ti install-seq-disable and the data.img & system.img was on the sd card....
Tried three times already...humpf..
Maybe I'll try a manual install.
I can post the dmesg if you think it helps??

If you use nand install you don't need anymore data.img and system.img ...
the install-seq install all on nand.
Post your dmesg (with a link) and i'll take a look...

Hi, at first I want to thank you for this tut and all your work It walked me through the proces of getting android on my pola100.
Just wanted to ask what I can delete from my sd card after succesful flashing. Can I delete complete folder andboot? Thx for your help

All the files, but it would be a better choice to keep all file on sd...

l1q1d said:
If you use nand install you don't need anymore data.img and system.img ...
the install-seq install all on nand.
Post your dmesg (with a link) and i'll take a look...
Click to expand...
Click to collapse
When I used your install script for the first time it tries to install system.img and data.img on the EXT2 partition.
After restart I entered the menu and selected the NAND option.
When I re-install the nbh and using your install script (for the second time) it is working.

I have the same problem as zeeos, I have "loading..." on my screen but nothing happens. I tryed many nbh...

Try to change sd card or flash from windows application...

Hey guys,
I've followed the guide exactly, performed task 29 first and ran from a clean, formatted SD card.
I'm using the latest Froyo build and have changed it to panel 1 as I have a POLA100.
The install procedure runs smoothly until it it gets to the point where I see the Warm Donut boot screen with animation, but then it stops and just shows a black screen with white cursor in the top left hand corner, doesn't go any further. Is this normal? Do I have to wait longer? I've left it for half an hour...?

Which files did you use?

[Q] can't umount offical system.img in ubuntu?

Hello,
I want to modify system.img and repack it from ruu "Saga_HKCSL_CHT_1.31.832.3"
My operation system is Ubuntu 11.04, I have used command : " mount system.img ./tmp/ -o loop " , it auto mount as ext4 format.
It looks like no problem, but when I umount the image, the command "umount ./tmp/" can't return, and the kernel log has a message " EXT4-fs error (device loop2): ext4_init_inode_table:1282: comm ext4lazyinit: Something is wrong with group 0 "
I guess the Desire S's ext4 format is not the normal ext4 format, I try to use " simg2img " and got a error message " bad magic ".
Can anyone help me? thanks!

If I understand, you want to extract system.img, modify it, and put it back in the RUU file ?

Igl0 said:
If I understand, you want to extract system.img, modify it, and put it back in the RUU file ?
Click to expand...
Click to collapse
I use hboot to write the system.img back, because my phone is S-Off, so i can put the PG88IMG.zip on the SD card to flash my phone.

I meet same problem,someone can help me

HTC Sensation: Can't install zip from SD card & WiFi "Error" stopped working.

HTC Sensation: Can't install zip from SD card & WiFi "Error" stopped working.
Hello
I recently rooted my HTC Sensation (Pyramid) Z710e using KINGORoot and it was a successful root, unlocked bootlader and got SuperUser.
Security is still on (S-ON) as I don't need or wish to turn this off.
I have tried using CWM recovery 5.8.0.9 but flashing the ROM which was MADE for the Pyramid failed, then I tried using TWRP 2.1.0 but I got the same result, and then I also tried CWM recovery 5.0.2.0 but still the same result (error below).
The problem: When I try flashing a new custom ROM after doing data wipe, cache wipe and dalvik cache wipe it gives me the following error message:
' E: Error in /sdcard/'zipname'.zip
(Status 0 )
Installation Aborted. '
All recoveries downloaded were specific to my phone (obvoiusly) so all were named with Pyramid in them (ex. "twrp-pyramid-2.1.0.img") and so were the custom ROMs, specific to the sensation.
I read something about changing the META-INF File from the new ROM zip to a working META-INF file for the Pyramid but when I tried this it didn't work either, got me an error Status 1 message if I remember correctly.
I'm currently running a downloaded zip of ICS (Ice Cream Sandwich) Android 4.0.3 which is like the OS I had before I formatted everything except SD Card. However my WiFi isn't working anymore since I flashed this downloaded ICS zip and what I mean by not working I mean that when you flip the switch to turn WiFi on it flips to On and then to Off again immediately, and in the settings menu it says there's an Error, but that's it. I tried using the Wifix manager app with the code but that didn't work at all.
Any help is greatly appreciated as to what I can do regarding why I can't install a zip successfully from recovery or as to how I can fix my WiFi problem on my Sensation.
Thanks

Hello
Please wait for the moderation team to move this thread to relevant section.
Do register an account on xda for better access and privileges.
Have a good day !

Flash the boot.img of the rom via fastboot command
The command is fastboot flash boot boot.img
And I suggest to use 4ext recovery since you are on S-ON

Still not working :/
Thank you for the reply
Ok I did what you said, I'm currently trying to get the new latest version of CM12 - Lollipop for my sensation.
And yes I'm using 4ext recovery aswell.
I flashed the boot.img file in my phone and it was a success, however after wiping cache, davlik, and data and formatting all partitions except sd card I go to flash the CM12 ROM but it's giving me a status 0 error again.
Am I missing something?
Here is the log of when I try installing the CM12 zip
"
Installing: /sdcard/cm-12-20150203-UNOFFICIAL-pyramid.zip
Finding update package...
I:Update location: /sdcard/cm-12-20150203-UNOFFICIAL-pyramid.zip
Opening update package...
Installing update...
Warning: No file_contextsminzip: Extracted 3 file(s)
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
grep: /system/build.prop: No such file or directory
Not backing up files from incompatible version: 12
run_program: child exited with status 127
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
grep: /system/build.prop: No such file or directory
Not backing up files from incompatible version: 12
could not detect filesystem for /dev/block/platform/msm_sdcc.1/by-name/system, assuming ext4
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: No such file or directory
unmount of /system failed; no such volume
could not detect filesystem for /dev/block/platform/msm_sdcc.1/by-name/userdata, assuming ext4
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/userdata at /data: No such file or directory
unmount of /data failed; no such volume
could not detect filesystem for /dev/block/platform/msm_sdcc.1/by-name/system, assuming ext4
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: No such file or directory
E:Error in /sdcard/cm-12-20150203-UNOFFICIAL-pyramid.zip
(Status 0)
Installation aborted.
"
Thanks

Spitfire98 said:
Thank you for the reply
Ok I did what you said, I'm currently trying to get the new latest version of CM12 - Lollipop for my sensation.
And yes I'm using 4ext recovery aswell.
I flashed the boot.img file in my phone and it was a success, however after wiping cache, davlik, and data and formatting all partitions except sd card I go to flash the CM12 ROM but it's giving me a status 0 error again.
Am I missing something?
Here is the log of when I try installing the CM12 zip
"
Installing: /sdcard/cm-12-20150203-UNOFFICIAL-pyramid.zip
Finding update package...
I:Update location: /sdcard/cm-12-20150203-UNOFFICIAL-pyramid.zip
Opening update package...
Installing update...
Warning: No file_contextsminzip: Extracted 3 file(s)
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
grep: /system/build.prop: No such file or directory
Not backing up files from incompatible version: 12
run_program: child exited with status 127
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
grep: /system/build.prop: No such file or directory
Not backing up files from incompatible version: 12
could not detect filesystem for /dev/block/platform/msm_sdcc.1/by-name/system, assuming ext4
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: No such file or directory
unmount of /system failed; no such volume
could not detect filesystem for /dev/block/platform/msm_sdcc.1/by-name/userdata, assuming ext4
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/userdata at /data: No such file or directory
unmount of /data failed; no such volume
could not detect filesystem for /dev/block/platform/msm_sdcc.1/by-name/system, assuming ext4
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: No such file or directory
E:Error in /sdcard/cm-12-20150203-UNOFFICIAL-pyramid.zip
(Status 0)
Installation aborted.
"
Thanks
Click to expand...
Click to collapse
did you flash the latest version of 4ext recovery?
if not take it from here
http://d-h.st/rG7
extract the recovery.img and flash it via fastboot command

Spitfire98 said:
Thank you for the reply
Ok I did what you said, I'm currently trying to get the new latest version of CM12 - Lollipop for my sensation.
And yes I'm using 4ext recovery aswell.
[]
E:Error in /sdcard/cm-12-20150203-UNOFFICIAL-pyramid.zip
(Status 0)
Installation aborted.
Click to expand...
Click to collapse
1.) Make sure you have at least 4ext recovery v1.0.0.6 RC2 in order to install new ROMs. Otherwise you will very likely get a status 0 error with most ROMs.
2.) I suggest to use CM11 as a daily driver, Lollipop so far has not been stable enough on the Sensation, I had different kinds of problems. Still seems to be a bit experimental to me.

WiFi + ROM (status 0) ~ Problem SOLVED!
Okay, first of all, a huge thanks to everyone that replied and took the time to help me with my problem!
The WiFi problem occurred because I had the incorrect ROM Build name even though it was like the old untampered Ice Cream Sandwich (my stock O.T.A.update ICS was 3.32.x and the one I had downloaded and flashed myself was a stock ICS to bring back my phone's old OS but it was 3.33.x).
The problem of the status 0 error was that at first I was forgetting to flash the Boot.img file in the phone, but then it was because I had version 1.0.0.5 of 4ext recovery not 1.0.0.6 (the latest) as you guys suggested. I can't believe it was that simple but it's solved atleast now and I am infact currently running the latest CM12 Lollipop on my Sensation which looks amazing but since its still unofficial it has a few small bugs.
Once again Thanks all
Happy Devving!

Stuck at YU logo

1) Accidentally wiped all data including Internal Storage
2) Twrp 3.0 is working, but can't able to install any rom, Getting E:failed to mount / cache (Invalid argument) etc etc..
3)Getting "NO OS Installed" message in TWRP &- Internal Storage size is 0 (TWRP)
4) Followed Steps to flash factory image (WINDOWS)
Download the factory image fastboot package
Extract the contents of the fastboot package into a folder.
Download this flashing tools package
Extract the contents of the flashing tools zip into the same folder
To make sure, check that system.img, boot.img etc files are in the same folder as flash-all.bat, fastboot.exe etc
Connect your phone in fastboot mode, steps for which are : -
a. Power off your phone
b. Press and hold the Volume Up key
c. With the Volume Up key, connect the phone to your PC/Laptop with USB cable
d. You can let go off the Volume Up key when Fastboot Mode is displayed on the screen
Run flash-all.bat by double clicking on it.
A command window will open and flashing procedure will start
DO NOT disconnect the device during flashing procedure
The command window will close after the flashing process is over.
Disconnect the USB cable, and boot the phone normally by long pressing the Power button
But getting this error while flashing: http://imgur.com/g3NozUJ
After reboot,phone is stuck at YU logo..

Yuphoria stuck at YU Logo.
I had got notification for the OTA Cyanogen 12.1 Update and I had updated it. But even after reboot, the same 12.1 Update-notification would still appear again.
Later, I switched off Yuphoria to take out the External-SD-Card for data-transfer. Then when I switched on the Yuphoria, this Yu-Logo Boot-Loop Problem has started.
Now, My Yuphoria is Stuck at Yu-Logo on boot... and showing 'cannot mount partitions' errors when I boot custom-recovery twrp.
I have unlocked the bootloader.
From what I read online, I guess the memory partition-tables have got corrupted.... Now how can we solve this corrupted memory problem ?
I read about fastboot-flashing database.rfs or dbdata.rfs in some xda-developers Threads.
-----------------------------------------
I tried flash-all.bat with latest Cyanogen Official 12.1 ROM signed-fastboot.zip file... but still stuck at Yu-Logo on boot....
I fastboot boot trwp 2.6 custom-recovery.img and installed Cyanogen 12.1 ROM signed.zip file from external-sd card. But trwp says cannot mount partitions '/data', '/system', '/cache' etc...
---------------------------------------
I ran the command e2fsck /dev/block/bootdevice/by-name/system in terminal.
Then this message came : 'superblock has an invalid journal (inode 8) ext4'
I entered yes for correction multiple times and the process completed....
But still stuck at YU Logo on reboot.... Please Help.
-----------------------------------
I erased persist, then flashed persist.img.
Then I booted into twrp recovery, and adb sideload cm-12.1-YPG4PAS8A8-lettuce-signed.zip
The sideload started and then stopped with error : failed to unmount /cache ; failed to unmount /data ;
-----------------------------------
I boot into twrp 2.8.7.2 from fastboot-mode using command : sudo fastboot -i 0x2a96 boot twrp.img
Selected Wipe → advanced wipe → selected data :
It shows :
Mount Point : /data , File system : ext4 , Present: Yes, Removable: No, Size:0MB, Used: 0MB, Free 0MB, Backup Size: 0MB
Then I tapped on change/repair file system → change file system → EXT4 → Swiped IT...
Error : Format Failed.
E: Unknown MTP message type: 1
Failed to unmount '/data' (Invalid argument)
Error changing file system.
Updating Partition details.......
Failed to unmount '/system', '/data', '/cache' (Invalid arguments)
....done
Unable to mount storage.
After 'Change File System' Failed, I tried 'Repair File System' and 'Resize File System' also... all Failed similarly....
Only TWRP 2.8.7.2 and lower versions boots successfully in my Yuphoria.
TWRP 3.0.0 will not boot successfully. The TWRP logo will appear and then show command errors, and the phone will restart.
Please help me reinstall OS in my softbricked Yuphoria.

Goodison14 said:
I had got notification for the OTA Cyanogen 12.1 Update and I had updated it. But even after reboot, the same 12.1 Update-notification would still appear again.
Later, I switched off Yuphoria to take out the External-SD-Card for data-transfer. Then when I switched on the Yuphoria, this Yu-Logo Boot-Loop Problem has started.
Now, My Yuphoria is Stuck at Yu-Logo on boot... and showing 'cannot mount partitions' errors when I boot custom-recovery twrp.
I have unlocked the bootloader.
From what I read online, I guess the memory partition-tables have got corrupted.... Now how can we solve this corrupted memory problem ?
I read about fastboot-flashing database.rfs or dbdata.rfs in some xda-developers Threads.
-----------------------------------------
I tried flash-all.bat with latest Cyanogen Official 12.1 ROM signed-fastboot.zip file... but still stuck at Yu-Logo on boot....
I fastboot boot trwp 2.6 custom-recovery.img and installed Cyanogen 12.1 ROM signed.zip file from external-sd card. But trwp says cannot mount partitions '/data', '/system', '/cache' etc...
---------------------------------------
I ran the command e2fsck /dev/block/bootdevice/by-name/system in terminal.
Then this message came : 'superblock has an invalid journal (inode 8) ext4'
I entered yes for correction multiple times and the process completed....
But still stuck at YU Logo on reboot.... Please Help.
-----------------------------------
I erased persist, then flashed persist.img.
Then I booted into twrp recovery, and adb sideload cm-12.1-YPG4PAS8A8-lettuce-signed.zip
The sideload started and then stopped with error : failed to unmount /cache ; failed to unmount /data ;
-----------------------------------
I boot into twrp 2.8.7.2 from fastboot-mode using command : sudo fastboot -i 0x2a96 boot twrp.img
Selected Wipe → advanced wipe → selected data :
It shows :
Mount Point : /data , File system : ext4 , Present: Yes, Removable: No, Size:0MB, Used: 0MB, Free 0MB, Backup Size: 0MB
Then I tapped on change/repair file system → change file system → EXT4 → Swiped IT...
Error : Format Failed.
E: Unknown MTP message type: 1
Failed to unmount '/data' (Invalid argument)
Error changing file system.
Updating Partition details.......
Failed to unmount '/system', '/data', '/cache' (Invalid arguments)
....done
Unable to mount storage.
After 'Change File System' Failed, I tried 'Repair File System' and 'Resize File System' also... all Failed similarly....
Only TWRP 2.8.7.2 and lower versions boots successfully in my Yuphoria.
TWRP 3.0.0 will not boot successfully. The TWRP logo will appear and then show command errors, and the phone will restart.
Please help me reinstall OS in my softbricked Yuphoria.
Click to expand...
Click to collapse
Exact same problem for me... someone please help..

I too have been stuck up with the same problem, but in Yu Yureka...Brothers, Don't we really have a solution for this issue?!?!?...Please do something dear nerds lot of thanks!!

same prblm
anyone got solution for this ??

Exact problem.........
I ve gave it micromax service center, they asked 400 and began their work. after some time the man came out and sad, this is a board problem, you have to change the board. My friend is an embedded service engineer. He is saying its just a soft brick and the device is perfectly working. Those knowledgeless idiots dont want to find solution for this, the simply trying to change the board. Friends the problem we have is 100% a software issue, pls dont fall in their trap............

Same issue
Guys anyone got the solution ? Please help ...

Anybody got solutions, please respond

Same here
I tried everything but nothing seems to work. Someone help....

Seems to be Soft-Brick Software issue....
TWRP Recovery is not able to mount the /system , /cache and /data partitions...
but inside TWRP Recovery FileManager , we can open and browse all partiton files and system folders/files in /dev directory....
Also the TWRP Terminal shell can be used to run e2fsck and mke2fs commands...
So I think the /system, /cache and /data , and other corrupted android partitions like /misc can be repaired and mounted again, using the right steps and procedures....
Then I believe TWRP Recovery will mount partitons again and work, and we will be able to install/flash new ROM... Phone will boot into OS again...
We need Somebody with enough technical know-how to run Terminal Shell commands and repair corrupted android partitions.
Please if someone can help, would be greatful...
I used my Yuphoria for 10 months... now lying useless for one year...
---------- Post added at 11:42 AM ---------- Previous post was at 11:05 AM ----------
This XDA-Developers Thread has people trying and finding solutions to our problem.... Some even claim to have found the solution.
[Soft Brick] [Flash Stock] [Recovery] [ADB Driver] Yuphoria [Solution] by EssArr , 119 replies.
https://forum.xda-developers.com/yu-yuphoria/help/bricked-t3174710
Will try and find out a method there...

Got solved?
chattboyz said:
I ve gave it micromax service center, they asked 400 and began their work. after some time the man came out and sad, this is a board problem, you have to change the board. My friend is an embedded service engineer. He is saying its just a soft brick and the device is perfectly working. Those knowledgeless idiots dont want to find solution for this, the simply trying to change the board. Friends the problem we have is 100% a software issue, pls dont fall in their trap............
Click to expand...
Click to collapse
So did you get the soultion for it? If yes, what?

The post is of no help
Goodison14 said:
TWRP Recovery is not able to mount the /system , /cache and /data partitions...
but inside TWRP Recovery FileManager , we can open and browse all partiton files and system folders/files in /dev directory....
Also the TWRP Terminal shell can be used to run e2fsck and mke2fs commands...
So I think the /system, /cache and /data , and other corrupted android partitions like /misc can be repaired and mounted again, using the right steps and procedures....
Then I believe TWRP Recovery will mount partitons again and work, and we will be able to install/flash new ROM... Phone will boot into OS again...
We need Somebody with enough technical know-how to run Terminal Shell commands and repair corrupted android partitions.
Please if someone can help, would be greatful...
I used my Yuphoria for 10 months... now lying useless for one year...
---------- Post added at 11:42 AM ---------- Previous post was at 11:05 AM ----------
This XDA-Developers Thread has people trying and finding solutions to our problem.... Some even claim to have found the solution.
[Soft Brick] [Flash Stock] [Recovery] [ADB Driver] Yuphoria [Solution] by EssArr , 119 replies.
https://forum.xda-developers.com/yu-yuphoria/help/bricked-t3174710
Will try and find out a method there...
Click to expand...
Click to collapse
This is of no help as partitions are not getting mounted.

stuck at yu logo
i accidentially wiped my yu yurekas internal storage and got stucked at yu logo
i approched about 3 local service centers bt they said
it cannot be repaired because of failed to connect with their software box
and atlast i reched another localservice center come sales shop and they also advoced tge same bt understanding my sady situation the service boy at the shop asked me that "may i check it for further options if you allow to took the device as DEAD CONDITION for servicing bcz it may completely dead after this"
i agreed it
after a day he contacted me and said the problem has fix thank god
now its working fine
if any one want to know more details
such as about service centre
feel free to contact me through
[email protected]
thankyou:good:

Have anyone try to Flash stock rom?

nischait said:
Have anyone try to Flash stock rom?
Click to expand...
Click to collapse
Same problem here !!
Tried to flash the ROM with QFIL but the port is not detected by the software.
Also tried with fastboot.exe method still the same sometimes it says write failed for Size too large of system.img and if I change the default size limit (with -S option) it says "Error : Write failed"

degrader said:
Same problem here !!
Tried to flash the ROM with QFIL but the port is not detected by the software.
Also tried with fastboot.exe method still the same sometimes it says write failed for Size too large of system.img and if I change the default size limit (with -S option) it says "Error : Write failed"
Click to expand...
Click to collapse
Try annabathina method

nischait said:
Try annabathina method
Click to expand...
Click to collapse
Hi, can you share the link please?

degrader said:
Hi, can you share the link please?
Click to expand...
Click to collapse
Your device model please

Device is not getting detected
Hi,
I want to flash my Yuphoria. But, when i connect my device in Fastboot mode, my LAP (Windows 7 32 bit) is showing "Unknown USB". How to solve this issue??? please help me.

shashankdatta1218 said:
Hi,
I want to flash my Yuphoria. But, when i connect my device in Fastboot mode, my LAP (Windows 7 32 bit) is showing "Unknown USB". How to solve this issue??? please help me.
Click to expand...
Click to collapse
Install adb and fastboot drivers first

flash G930UUEU4BQD2 on 930T - failed setting up dirty target

930T: on stock G930TUVU4BQH7.
use Odin3+v3.12+(PrinceComsy).
Flashing G930UUEU4BQD2 was "pass", then failed while installing the applications.
any help is appreciated. err mesg below and attached
--Installing package...
E: Failed setting up dirty target
[com-app-link] fail to mount /system as rwE: failed
successfully verify for dmverity hash tree
E: failed to stat (null)
E: failed to mount /system (Invalid argument)

Same problem here...still no solution.
Mine boots and is usable for a minute or two, but by the time I get an error that Samsung Cloud has stopped, the phone reboots.

yutaka001 said:
930T: on stock G930TUVU4BQH7.
use Odin3+v3.12+(PrinceComsy).
Flashing G930UUEU4BQD2 was "pass", then failed while installing the applications.
any help is appreciated. err mesg below and attached
--Installing package...
E: Failed setting up dirty target
[com-app-link] fail to mount /system as rwE: failed
successfully verify for dmverity hash tree
E: failed to stat (null)
E: failed to mount /system (Invalid argument)
Click to expand...
Click to collapse
did you ever figure anything out I got the same thing on my SM-G930P

MR G00DT1M3Z said:
did you ever figure anything out I got the same thing on my SM-G930P
Click to expand...
Click to collapse
You just gotta flash regular CSC and not home CSC. It will wipe your device but it fixes the problem.

unnecessarycomma said:
You just gotta flash regular CSC and not home CSC. It will wipe your device but it fixes the problem.
Click to expand...
Click to collapse
Thank you I figured that out by reading a little more. Hey do you know anything about how to sim unlock my sm-g930p ?

unnecessarycomma said:
You just gotta flash regular CSC and not home CSC. It will wipe your device but it fixes the problem.
Click to expand...
Click to collapse
I tried that before I read your post and it worked. Thank you!