Related
To the Guru of this forum. After my last rom flashing my device is keeping booting into recovery :crying:. Is it briked ? If so my only hope is the unbricking project ? Thanks in advance.
What recovery are you running?
Can you use the power menu within recovery to boot into bootloader?
Also, please provide as much pertinent info as possible, ie: rom you flashed, firmware, s-off or s-on, locked or unlocked. With your description it's basically like saying, "my car makes a noise all the time. what is causing it?".
Its not bricked.If u can enter recovery
Sent from my HTC sensation
Sorry you are right:
What recovery are you running? 4Ext
Can you use the power menu within recovery to boot into bootloader? yes
The device is HTC unlocked with S-On.
Rom JBMIUI v4.1 2.8.31 R2.
HBOOT 1.27.0000
firmware 3.33.401.6
I've format everything but SD. Restored the most recent back up done today before flashing. Once it reboots HTC logo comes up once, black screen, HTC logo, 4Ext is coming up saying that smartflash it is set to update the boot partition on next system start asking if this should be removed.
I've downloaded and installed again PG58IMG *different files using bootloader
I've founded a 3.33.401.6-Unsecured-Boot.img,+Root+Busybox zip file that can be installed via recovery but it did not help.
At this point I need a bit of help to look into the right direction and I'm not sure that Unbrick_Pyramid is the right way.
Thanks again.
Try turning off smartflash and flash a 3.33 stock rom to see if it will boot.
What was your last working setup, and what were you trying to install?
Sent from my HTC Sensation 4G using Tapatalk 2
Hi. Manage to flash a stock 3.33.
It stopped to reboot straight into recovery.
Sits now on HTC logo now for about 10 mins. I plan to let him run for 1 hr and see what happens.
Was thinking to install CWM on the basis that could be a 4ext recovery issue, toughs?
GROGG88 said:
Try turning off smartflash and flash a 3.33 stock rom to see if it will boot.
What was your last working setup, and what were you trying to install?
Sent from my HTC Sensation 4G using Tapatalk 2
Click to expand...
Click to collapse
If you can install clockworkmod that may help.
Tge device isnt getting the message that it has already booted into recovery once. So something may be jacked up with 4ext.
Clockwork may bypass all that when it doesnt know what to do with that signal to run smartflash.
Worst case scenario...put a full pm58img containing a rom and recovery on the sf card and flash that through bootloader.
You should still be able to get to bootloader as the device looks for that option first.
Sent from my HTC Sensation using xda app-developers app
Hallo. Ok installed CWM. Can please direct me to a full pm58img as you mentioned ? Thx.
Skipjacks said:
If you can install clockworkmod that may help.
Tge device isnt getting the message that it has already booted into recovery once. So something may be jacked up with 4ext.
Clockwork may bypass all that when it doesnt know what to do with that signal to run smartflash.
Worst case scenario...put a full pm58img containing a rom and recovery on the sf card and flash that through bootloader.
You should still be able to get to bootloader as the device looks for that option first.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
DiscreteTask said:
Hallo. Ok installed CWM. Can please direct me to a full pm58img as you mentioned ? Thx.
Click to expand...
Click to collapse
And did that help? Are you able to get into recovery without errors now? If so you should be able to flash a fresh version of any ROM.
Try that first. Get any ROM. Flash it. See if it boots.
If you have successfully replaced 4EXT I will bet a fresh flash of a ROM will now boot.
Also worth a shot is replacing or upgrading the firmware, as that could be what's sending the phone into recovery on each boot (though this is less likely that 4EXT just being broken)
Flash a firmware PM58IMG like 3.32 or 3.33 and see if that helps.
But for starters, put a fresh ROM on the SD card and flash it with CWM. (BE SURE IT'S A ROM THAT DOESN'T REQUIRE 4EXT!!)
Once you've got it all fixed you can switch back to 4EXT. I have a feeling it was just the copy you were running that got botched. The software itself is solid and stable. A new copy shoudl work fine now.
CWM v5.0.2.0 was installed fine.
3.33 firmware installed once again.
Using this I've installed ROM that I already did in the past w/o luck, they all sit on the HTC logo. Is like the initial boot sequence is broken. Is boot.img part of the firmware or ROM ?
Trying to download some additional ones.
Thanks,
Skipjacks said:
And did that help? Are you able to get into recovery without errors now? If so you should be able to flash a fresh
version of any ROM.
Try that first. Get any ROM. Flash it. See if it boots.
If you have successfully replaced 4EXT I will bet a fresh flash of a ROM will now boot.
Also worth a shot is replacing or upgrading the firmware, as that could be what's sending the phone into recovery on each boot (though this is less likely that 4EXT just being broken)
Flash a firmware PM58IMG like 3.32 or 3.33 and see if that helps.
But for starters, put a fresh ROM on the SD card and flash it with CWM. (BE SURE IT'S A ROM THAT DOESN'T REQUIRE 4EXT!!)
Once you've got it all fixed you can switch back to 4EXT. I have a feeling it was just the copy you were running that got botched. The software itself is solid and stable. A new copy shoudl work fine now.
Click to expand...
Click to collapse
DiscreteTask said:
CWM v5.0.2.0 was installed fine.
3.33 firmware installed once again.
Using this I've installed ROM that I already did in the past w/o luck, they all sit on the HTC logo. Is like the initial boot sequence is broken. Is boot.img part of the firmware or ROM ?
Trying to download some additional ones.
Thanks,
Click to expand...
Click to collapse
The more details you give, the better the answers will be. Don't consider any detail too small.
What do you mean you installed ROM's that you had done in the past? Do you mean you are trying to restore a backup made with 4EXT?
That won't work. You need to flash a fresh version of the ROM after wiping.
Also, CWM won't install some ROM's that you may have used in the past. What ROM are you trying to install?
The HTC logo that first pops up when you hit the power button is part of the firmware.
Make sure you do a full wipe of everything but the SD card from within CWM. Get whatever's causing the problem off that way. Then flash a fresh install of a ROM from scratch.
Hi.
I did not use any backup only fresh ROMs: ARHD, Elegantia, but also stock ROMs I could find.
I've tried also some PG58IMG with ROM included.
Cheers.
Skipjacks said:
The more details you give, the better the answers will be. Don't consider any detail too small.
What do you mean you installed ROM's that you had done in the past? Do you mean you are trying to restore a backup made with 4EXT?
That won't work. You need to flash a fresh version of the ROM after wiping.
Also, CWM won't install some ROM's that you may have used in the past. What ROM are you trying to install?
The HTC logo that first pops up when you hit the power button is part of the firmware.
Make sure you do a full wipe of everything but the SD card from within CWM. Get whatever's causing the problem off that way. Then flash a fresh install of a ROM from scratch.
Click to expand...
Click to collapse
Arhd and elegencia wont work with cwm. So there is your isdue. Try cm9 or 10 to see if you can boot one of those.
Sent from my HTC Sensation using xda app-developers app
Hallo, after trying all option the following did work for me:
- re-lock bootloader via fastboot oem lock
- apply stock ROM founded in this list http://forum.xda-developers.com/showthread.php?t=1074559
- rebooted fine
I guess that HTC RUU had some superpower and erase and installed whatever file(s) were corrupted.
Now I'm on stock 3.6 - fw 3.33.401.106 - radio 11.76A.3504.00UU_11.24A.3504.31_M
HBOOT 1.29 - S-ON - Relocked.
Standard Recovery.
Now I'm reading how to return my device to S-OFF w/o damaging it again.
Many thanks to skipjacks & groog88 :good:
Skipjacks said:
Arhd and elegencia wont work with cwm. So there is your isdue. Try cm9 or 10 to see if you can boot one of those.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
I am wondering if I made any major changes or done anything wrong.
1) Yesterday I attempted to "S-Off" my phone for the first time ever since purchase. When "revolutionary.io" asked me what Bootloader I was on, I connected the phone through USB and the revolutionary executable told me 1.18.0000. The first few tries failed because it just kept saying "Waiting for bootloader" but after messing with different HTC drivers and unplugging a bunch of times it finally took and went through S-off. Now when I boot into bootloader it says my verison is 1.17 S-off. Is it correct that I went backwards from 1.18 to 1.17?
2) I flashed a custom ROM but being a noob that I am I knew nothing about firmware so I was stuck in bootloop of Cyanogen JB. I flashed through RUU to stock ROM but it is not the same stock ROM that came with my phone out of the box, some of the settings are different it does have the same network though TMOUS; especially the personalize options some of them do not work (themes). Is it alright if I flashed to this ROM as opposed to the exact same one that my phone came with? If I update my firmware and flash Cyanogen again this ROM is basically gone anyways right? I am just concerned that by RUU flashing this stock ROM I changed the firmware or baseband or something important.
Thats all I'm wondering, hoping you can give me a Yes or a No and a brief explanation to each question, thanks so much
fashofasho said:
I am wondering if I made any major changes or done anything wrong.
1) Yesterday I attempted to "S-Off" my phone for the first time ever since purchase. When "revolutionary.io" asked me what Bootloader I was on, I connected the phone through USB and the revolutionary executable told me 1.18.0000. The first few tries failed because it just kept saying "Waiting for bootloader" but after messing with different HTC drivers and unplugging a bunch of times it finally took and went through S-off. Now when I boot into bootloader it says my verison is 1.17 S-off. Is it correct that I went backwards from 1.18 to 1.17?
2) I flashed a custom ROM but being a noob that I am I knew nothing about firmware so I was stuck in bootloop of Cyanogen JB. I flashed through RUU to stock ROM but it is not the same stock ROM that came with my phone out of the box, some of the settings are different it does have the same network though TMOUS; especially the personalize options some of them do not work (themes). Is it alright if I flashed to this ROM as opposed to the exact same one that my phone came with? If I update my firmware and flash Cyanogen again this ROM is basically gone anyways right? I am just concerned that by RUU flashing this stock ROM I changed the firmware or baseband or something important.
Thats all I'm wondering, hoping you can give me a Yes or a No and a brief explanation to each question, thanks so much
Click to expand...
Click to collapse
when you did S-OFF in order to install Cyanogen JB first you had to flash the latest fw version and then the rom
the rom you tried to install requires the latest fw version
now are you still s-off?
what is now your hboot version?
what is your fw version?
I am wondering if I made any major changes or done anything wrong.
1) Yesterday I attempted to "S-Off" my phone for the first time ever since purchase. When "revolutionary.io" asked me what Bootloader I was on, I connected the phone through USB and the revolutionary executable told me 1.18.0000. The first few tries failed because it just kept saying "Waiting for bootloader" but after messing with different HTC drivers and unplugging a bunch of times it finally took and went through S-off. Now when I boot into bootloader it says my verison is 1.17 S-off. Is it correct that I went backwards from 1.18 to 1.17?
2) I flashed a custom ROM but being a noob that I am I knew nothing about firmware so I was stuck in bootloop of Cyanogen JB. I flashed through RUU to stock ROM but it is not the same stock ROM that came with my phone out of the box, some of the settings are different it does have the same network though TMOUS; especially the personalize options some of them do not work (themes). Is it alright if I flashed to this ROM as opposed to the exact same one that my phone came with? If I update my firmware and flash Cyanogen again this ROM is basically gone anyways right? I am just concerned that by RUU flashing this stock ROM I changed the firmware or baseband or something important.
Thats all I'm wondering, hoping you can give me a Yes or a No and a brief explanation to each question, thanks so much
Click to expand...
Click to collapse
1) Normal. You're good. And you'll have HBoot 1.27 or 1.29 when you're all done.
2) Not normal. You missed a step. You need to upgrade the firmware to 3.32 (HBoot 1.27) or 3.33 (HBoot 1.29). Either will run CM10, which gives you better performance is for you to decide. The difference is mainly the radio for cell reception. If you're a T Mobile user try the 3.32 for T Mobile for starters. (Available in the radio/firmware thread. Do a search and you'll find it.)
Basicly what you did was flash an Android 4.x ROM on Android 2.3 firmware. That doesn't work. They are incompatible.
If you RUU'ed back to stock, you might have reverted back to S-On and lost your custom recovery, so check. If you have S-On now, you have to start over.
If you still have s-off and can still get into your recovery (Clockwork or 4EXT, I receomend 4EXT but CM10 will load from either), find that Firmware thread, download 3.32 for T Mobile. Follow the instructions in that thread on how to install new firmware. It's painfully simple...you just put the firmware file on teh SD card, reboot, and let it do it's thing. The firmware thread will be more specific, but that's about it. It takes 2 minutes. The phone will suddenly go black and power off for a second during the process. Don't panic. It's normal. AND DON'T TOUCH IT UNTIL IT TELLS YOU TO!!!!
Once you've done that, the stock ROM you have now will not boot. You will need to boot to recovery (Clockwork or 4EXT), do a full wipe, and flash CM10 again.
It should not boot.
This entire process (if you are still s-off and have your recovery working still) should take no more than 15 minutes. It sounds complicated but it's really not. I promise!
I just gave you a general overview. If you get stuck at any point come back and ask more specific questions about where you are stuck.
Skipjacks said:
1) Normal. You're good. And you'll have HBoot 1.27 or 1.29 when you're all done.
2) Not normal. You missed a step. You need to upgrade the firmware to 3.32 (HBoot 1.27) or 3.33 (HBoot 1.29). Either will run CM10, which gives you better performance is for you to decide. The difference is mainly the radio for cell reception. If you're a T Mobile user try the 3.32 for T Mobile for starters. (Available in the radio/firmware thread. Do a search and you'll find it.)
Basicly what you did was flash an Android 4.x ROM on Android 2.3 firmware. That doesn't work. They are incompatible.
If you RUU'ed back to stock, you might have reverted back to S-On and lost your custom recovery, so check. If you have S-On now, you have to start over.
If you still have s-off and can still get into your recovery (Clockwork or 4EXT, I receomend 4EXT but CM10 will load from either), find that Firmware thread, download 3.32 for T Mobile. Follow the instructions in that thread on how to install new firmware. It's painfully simple...you just put the firmware file on teh SD card, reboot, and let it do it's thing. The firmware thread will be more specific, but that's about it. It takes 2 minutes. The phone will suddenly go black and power off for a second during the process. Don't panic. It's normal. AND DON'T TOUCH IT UNTIL IT TELLS YOU TO!!!!
Once you've done that, the stock ROM you have now will not boot. You will need to boot to recovery (Clockwork or 4EXT), do a full wipe, and flash CM10 again.
It should not boot.
This entire process (if you are still s-off and have your recovery working still) should take no more than 15 minutes. It sounds complicated but it's really not. I promise!
I just gave you a general overview. If you get stuck at any point come back and ask more specific questions about where you are stuck.
Click to expand...
Click to collapse
i got confused
.i think your answer is going for fashofasho
Skipjacks said:
1) Normal. You're good. And you'll have HBoot 1.27 or 1.29 when you're all done.
2) Not normal. You missed a step. You need to upgrade the firmware to 3.32 (HBoot 1.27) or 3.33 (HBoot 1.29). Either will run CM10, which gives you better performance is for you to decide. The difference is mainly the radio for cell reception. If you're a T Mobile user try the 3.32 for T Mobile for starters. (Available in the radio/firmware thread. Do a search and you'll find it.)
Basicly what you did was flash an Android 4.x ROM on Android 2.3 firmware. That doesn't work. They are incompatible.
If you RUU'ed back to stock, you might have reverted back to S-On and lost your custom recovery, so check. If you have S-On now, you have to start over.
If you still have s-off and can still get into your recovery (Clockwork or 4EXT, I receomend 4EXT but CM10 will load from either), find that Firmware thread, download 3.32 for T Mobile. Follow the instructions in that thread on how to install new firmware. It's painfully simple...you just put the firmware file on teh SD card, reboot, and let it do it's thing. The firmware thread will be more specific, but that's about it. It takes 2 minutes. The phone will suddenly go black and power off for a second during the process. Don't panic. It's normal. AND DON'T TOUCH IT UNTIL IT TELLS YOU TO!!!!
Once you've done that, the stock ROM you have now will not boot. You will need to boot to recovery (Clockwork or 4EXT), do a full wipe, and flash CM10 again.
It should not boot.
This entire process (if you are still s-off and have your recovery working still) should take no more than 15 minutes. It sounds complicated but it's really not. I promise!
I just gave you a general overview. If you get stuck at any point come back and ask more specific questions about where you are stuck.
Click to expand...
Click to collapse
Thanks for the reply. Okay so here is where I am currently at. I haven't done anything since I reflashed stock ROM throguh RUU after the fail cyanogen flash. On this stock ROM whenever I load into bootloader it still says s-off 1.17 but I did lose my clockworkmod. So according to your instructions I should either clockworkmod again or 4ext now, that's okay right? If so, going to flash firmware then cyanogen!! Or is there a problem that I have s-off but not recovery.
P.s. there is no point in running revolutionary and have it s-off again when I already have it right, just thought it might be necessary to make things fresh
If you have a bootable phone right now this is easy as you may not need adb or fast boot or anything.
First off you will need to install 4ext. Get the app from the Play Store. Then run it and let it install its recovery module. (You may need to be rooted to do thus, which your stock rom is not. Im not sure if you can flash the recovery without root or not because Ive never tried without root. If so, then you will have to install Superuser via fastboot I think. You any guide for rooting to get instructions on this. Its easy.)
You may also find a way to install 4ext recovery via flashing from bootloader, but you will have to search for that. You MAY even be able to install it with the firmware upgrade. You will have to see if that is an available option.
Get your firmware from this thread...
forum.xda-developers.com/showthread.php?t=1459767
Follow the instructions to update. Once you have 3.3x firmware and 4ext simply boot to recovery, do a full wipe, and flash cm10 (make sure cm10 is on your sd card. You can download it from your currently working gingerbread rom so you have it available)
You have like 15-20 minutes worth of work to do, so its not a monumental obstacle to overcome. It just seems like alot
Sent from my HTC Sensation using xda app-developers app
Skipjacks said:
If you have a bootable phone right now this is easy as you may not need adb or fast boot or anything.
First off you will need to install 4ext. Get the app from the Play Store. Then run it and let it install its recovery module. (You may need to be rooted to do thus, which your stock rom is not. Im not sure if you can flash the recovery without root or not because Ive never tried without root. If so, then you will have to install Superuser via fastboot I think. You any guide for rooting to get instructions on this. Its easy.)
You may also find a way to install 4ext recovery via flashing from bootloader, but you will have to search for that. You MAY even be able to install it with the firmware upgrade. You will have to see if that is an available option.
Get your firmware from this thread...
forum.xda-developers.com/showthread.php?t=1459767
Follow the instructions to update. Once you have 3.3x firmware and 4ext simply boot to recovery, do a full wipe, and flash cm10 (make sure cm10 is on your sd card. You can download it from your currently working gingerbread rom so you have it available)
You have like 15-20 minutes worth of work to do, so its not a monumental obstacle to overcome. It just seems like alot
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
I am not rooted but am S-off. So my next step would be to root. I am suppose to have Clockworkmod to root AND 4EXT after right? Its not one or the other? I keep reading that people recommend 4ext is better than CWM but in order to root su-2.3.6.3-ef-signed.zip I need CWM first correct?
fashofasho said:
I am not rooted but am S-off. So my next step would be to root. I am suppose to have Clockworkmod to root AND 4EXT after right? Its not one or the other? I keep reading that people recommend 4ext is better than CWM but in order to root su-2.3.6.3-ef-signed.zip I need CWM first correct?
Click to expand...
Click to collapse
flash su-2.3.6.3-ef-signed.zip first and then install 4ext recovery
You're over engineering this. You don't need to root your current ROM first. That's an extra step since you're s-off.
If you are s-off it's really simple to get 4EXT recovery.
First, download this and put it on the root directory of your SD Card (meaning not in a folder, just on the SD Card. Do not rename it)
http://d-h.st/qnm
I got this download link from here...
http://forum.xda-developers.com/showthread.php?p=21989107
Click Thanks for Joaquinf in that thread. He made the 4EXT zip that's flashable through the bootloader.
That is 4EXT made into a zip file that's flashable via the bootloader, which you can do when you are S-off.
So put that file on the SD card, power the phone off, pull the battery out for a second and put it back in (this stops fastboot so you can get back to the bootloader). Then hold volume down and power at the same time. You have to hit both buttons at the same time. If it goes to the splash screen, pull the battery and try again.
When the bootloader loads up it will immediately find the PM58IMG.zip file. It will ask you if you want to install the update. Say yes by hitting volume up I think (it will tell you how to say yes)
Put the phone down and don't touch it until it tells you it's done. Should just take a second. But seriously don't touch it. Leave it alone.
If that works, you've just flashed 4EXT. You can check it by pulling the SD card out (so it doesn't try to flash the PM58IMG again) and rebooting to the bootloader and selecting 'recovery' from the menu. 4EXT should boot up.
This entire process so far shouldn't take more than 3 minutes total. It just sounds like a lot.
To see this detailed out by someone else in case you want to check what I'm saying, read steps 4 and 5 of the first post in this thread.
http://forum.xda-developers.com/showpost.php?p=21989063&postcount=1
Give the author 'thanks' again because he's awesome and deserves it.
Now you've got 4EXT installed. Great. You're 1/3rd of the way home.
Now you need to update your firmware. Delete the PM58IMG.zip file you used to flash 4EXT off the SD card (use a card reader or boot the phone up and delete it, whatever works. You can also use 4EXT as a card reader now too by choosing USB storage from inside 4EXT. It will give you access toteh SD card on your computer now)
Now get new Firmware from this thread.
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
try the 3.33 firmware universal. First download link in post 2 of the thread above.
CHECK THE MD5 SUM!!!! I'M NOT PLAYING AROUND HERE!!! You are worried about bricking your phone, this is where you can do it if the firmware .zip is bad.
Put that PM58IMG file on your SD and flash it in the bootloader the same way you flashed 4EXT recovery a minute ago. (If you're still in 4EXT recovery you can use it's power menu to reboot into bootloader easily.)
This will take a minute. The phone will shut off and go black in the middle of this process. Your heart will skip a beat. Relax. It'll come back on. Again, put the phone down and walk away while it does it's thing and don't touch it until it says it's done.
Delete the PM58IMG file from your SD card.
You are now 2/3 of the way there. Your phone WILL NOT boot up right now because your ROM is not compatible with your firmware. Relax. That's supposed to happen.
Now you can flash CM10. Make sure you have the CM10.zip file on your SD card nad GApps. (Bruce has Gapps in his downloads page). Delete the PM58IMG firmware file from your SD card (that's important)
Pull the battery again so you can get back into bootloader. Get into bootloader (power + volume down)
Select Recovery
4EXT should boot up.
Go to the Wipe menu. Wipe all partitions except SD card. (Old ROM is now gone)
Go back to the main menu.
Install from SD
Find the CM10.zip file you should have downloaded and put onto the SD card. Flash it.
This will take about 3 minutes. 4EXT will flash it and ask if you want to reboot. You do not yet. Not you need to flash Gapps the same way you flashed the ROM.
When that's done, now you can reboot. You shoudl see the CyanogenMod boot animation after the splash screen. Give it a few minutes to boot up this first time. Once it boots, set it up the way you like it. If you enjoy it, donate a few bucks to the developer, Bruce.
You don't have to root CM10. It's already rooted when you boot it up the first time.
Hi, seems like my One S's sdcard partition has corrupted. been using TWRP 2.500 and recently upadted to 2.6.30 to use the new Maximus Rom. During the rom installation, I wiped the sdcard sectrion by mistake so I couldn't get to flash the zip file, then, I've tried multiple times of recovery.img flashings via RUU mode or on the bootloader screen. Finally when I got the TWRP recovery mode again, it says the sdcard folder only accepts 48 MB so I cannot push any custom roms since they are bigger than 500MB... Any ideas? Should I send it to the repair shops? Please Help!! Thank you!
FYI, my phone was
Tampered, Unlocked, S-off
also, when I press mount button on TWRP, this list appears
Cache
Data
Internal SDcard
System
USB-OTG
but I select Internal SD, the computer says the removable disk has only 48MB of available space.(I wiped it multiple times!)
puwa said:
Hi, seems like my One S's sdcard partition has corrupted. been using TWRP 2.500 and recently upadted to 2.6.30 to use the new Maximus Rom. During the rom installation, I wiped the sdcard sectrion by mistake so I couldn't get to flash the zip file, then, I've tried multiple times of recovery.img flashings via RUU mode or on the bootloader screen. Finally when I got the TWRP recovery mode again, it says the sdcard folder only accepts 48 MB so I cannot push any custom roms since they are bigger than 500MB... Any ideas? Should I send it to the repair shops? Please Help!! Thank you!
FYI, my phone was
Tampered, Unlocked, S-off
also, when I press mount button on TWRP, this list appears
Cache
Data
Internal SDcard
System
USB-OTG
but I select Internal SD, the computer says the removable disk has only 48MB of available space.(I wiped it multiple times!)
Click to expand...
Click to collapse
Omg. Why the people dont read op before they are going to flash new Rom. Just follow the instructions.
Sent from my HTC One S
tominozh said:
Omg. Why the people dont read op before they are going to flash new Rom. Just follow the instructions.
Sent from my HTC One S
Click to expand...
Click to collapse
Could you please tell me at least it's repairable or not? I want your help..
Also, I wonder what part I missed so it happened...hmm
puwa said:
Could you please tell me at least it's repairable or not? I want your help..
Also, I wonder what part I missed so it happened...hmm
Click to expand...
Click to collapse
Yes, don't sweat it. It is repairable.
It's hard for my to tell what you missed, because you didn't write what you did. So just follow installation instructions in the first post of maximus Rom. (flash new firmware, modified recovery, then Rom).
Sent from my HTC One S
tominozh said:
Yes, don't sweat it. It is repairable.
It's hard for my to tell what you missed, because you didn't write what you did. So just follow installation instructions in the first post of maximus Rom. (flash new firmware, modified recovery, then Rom).
Sent from my HTC One S
Click to expand...
Click to collapse
thank you! so, for flashing a new firmware, what would be a good firmware to start? any recommendations? i tried the firmware.zip in the install kit but not worked. same 48MB limit on the /sdcard/. any ideas?
:laugh:
Just follow this. It worked for almost all of us..
http://forum.xda-developers.com/showthread.php?p=45621060
gelo01 said:
Just follow this. It worked for almost all of us..
http://forum.xda-developers.com/showthread.php?p=45621060
Click to expand...
Click to collapse
GRT!! Thanks so much for saving my LIFE!!
gelo01 said:
Just follow this. It worked for almost all of us..
http://forum.xda-developers.com/showthread.php?p=45621060
Click to expand...
Click to collapse
All of these steps work for me except flashing the recovery as a ZIP. I get the wrong CID error (code 42 if i remember correctly). Thing is, I flash the .img directly usign fastboot flash recovery and that works but then the install process says, in android, transfer ROM. At this point, I don't have access to the SD card and the ROM is not in my sd card (it was wiped anyway?)
*EDIT*
Ok I changed my CID to 1111111 and now it works to flash the firmware. I still get partitions errors it seems though.
What I did is flash the stock recovery, clear storage, factory reset, reflashed the firmware given in Maximus thread, then the TWRP given and still, I get problems with my sdcard not mounting?
GabeyC said:
All of these steps work for me except flashing the recovery as a ZIP. I get the wrong CID error (code 42 if i remember correctly). Thing is, I flash the .img directly usign fastboot flash recovery and that works but then the install process says, in android, transfer ROM. At this point, I don't have access to the SD card and the ROM is not in my sd card (it was wiped anyway?)
*EDIT*
Ok I changed my CID to 1111111 and now it works to flash the firmware. I still get partitions errors it seems though.
What I did is flash the stock recovery, clear storage, factory reset, reflashed the firmware given in Maximus thread, then the TWRP given and still, I get problems with my sdcard not mounting?
Click to expand...
Click to collapse
if you are talking about mounting usb storage in recovery, then no, you cannot do that on Maximus HD rom. (it's a modified TWRP to work on the new firmware)
You can sideload in TWRP or ADB push the rom to your sdcard.
I would give you a link to a page describing it, but search is unavailable right now, have to try later.
But just search that thread with keyword sideload. There you will find the exact commands to load the rom onto your sdcard.
tivofool said:
if you are talking about mounting usb storage in recovery, then no, you cannot do that on Maximus HD rom. (it's a modified TWRP to work on the new firmware)
You can sideload in TWRP or ADB push the rom to your sdcard.
I would give you a link to a page describing it, but search is unavailable right now, have to try later.
But just search that thread with keyword sideload. There you will find the exact commands to load the rom onto your sdcard.
Click to expand...
Click to collapse
Yea, that's exactly what I ended up doing... it's not clear on any thread though...
Thanks
I went back to CM, didn't like maximus so much and it didn't fix my EDGE only problem so
It went back to 48mb
Hi i had the same problem with my htc one s.So i paniced and for some reason i put s-on(I deleted the os from the pc using mount storage) I managed to fix it by installing the recovery as zip. Then i tried to adb sideload a rom but it didn't work. So i went to boot loader then to fast boot and did fastboot flash zip Energyrom.zip. That gave me an error so i went back to recovery to try to side load the rom again, but my sdcard went back to 48mb.I reflashed the recovery (the one from install package) same thing . What do i do????? I need help asap i want my phone back (IM ONLY 12) Please reply asap.
cyberusman said:
Hi i had the same problem with my htc one s.So i paniced and for some reason i put s-on(I deleted the os from the pc using mount storage) I managed to fix it by installing the recovery as zip. Then i tried to adb sideload a rom but it didn't work. So i went to boot loader then to fast boot and did fastboot flash zip Energyrom.zip. That gave me an error so i went back to recovery to try to side load the rom again, but my sdcard went back to 48mb.I reflashed the recovery (the one from install package) same thing . What do i do????? I need help asap i want my phone back (IM ONLY 12) Please reply asap.
Click to expand...
Click to collapse
I think the easiest way is to flash the stock recovery and then do a sdcard wipe then a factory reset.
After that, you go through the process as described in the maximus rom thread, you will have to flash with sideload. That should work afterward
I am doomed
Hi guys,
Yesterday I decided to try MaximusROM 10.0.0 HD on my HTC One S, which is s-OFF and with superCID. The problem is: I didn't flashed first the rom as it was said, and I just used the Installation Package, installing directly the firmware.zip and the modified recovery. I tried to follow the steps written before, but now my phone works with the stock rom but it says that there are only 48mb in sd card, and that means that I can't even take photos, because I have no memory left. I found out that my phone, when is booted up, in settings says that I have 15,96GB of space for applications. What can I do?
GabeyC said:
I think the easiest way is to flash the stock recovery and then do a sdcard wipe then a factory reset.
After that, you go through the process as described in the maximus rom thread, you will have to flash with sideload. That should work afterward
Click to expand...
Click to collapse
I think I need to to that process my sdcard appears to be 10 gig only. Do you have a link for stock recovery? mine is S4.
48 mb storage = new 3.16 firmware
fix = flash custom 2.6.1 twrp
Sent from my HTC One S using XDA Premium 4 mobile app
lost sd card 48mb
Hi I have big problem with my HTC one s I decided to install maximus hd but I need super cid and s-off facepalm metod everything I do original cid cange to 1111111... Get s-off acses and and install Rom then firmware and when Rom but Rom loads very slowly and sometimes
Black screen and not won't load Rom. And I decided to back s-on and back to original CID HTC_111 and install tricdroid beta 10.0 and then my sdcard 48mb. I try everything flash stock recovery delete all data and wipe but still 48mb try changing a few recovery cmrecovery all types and Twrp recovery but work one prefect Twrp 2.6.1.0 this recovery show me 12gb but I installed Rom on pc 48 I try again flash firmware from maximus hd but failed bicose I change my cid and back to s-on then. I try to go to s-off and change my cid to 11111111.
Noting happen my cid still htc_111 I can't do s-off my hboot is 2.16.0000 I read this forums I find many solutions but no-one don't help my. Try install three roms trickdroid magiobeta and source v14 still 48 I just want get my sd card please somebody. I try many thing relock boot loader try with ruu but still 48
help
dcvc said:
Hi I have big problem with my HTC one s I decided to install maximus hd but I need super cid and s-off facepalm metod everything I do original cid cange to 1111111... Get s-off acses and and install Rom then firmware and when Rom but Rom loads very slowly and sometimes
Black screen and not won't load Rom. And I decided to back s-on and back to original CID HTC_111 and install tricdroid beta 10.0 and then my sdcard 48mb. I try everything flash stock recovery delete all data and wipe but still 48mb try changing a few recovery cmrecovery all types and Twrp recovery but work one prefect Twrp 2.6.1.0 this recovery show me 12gb but I installed Rom on pc 48 I try again flash firmware from maximus hd but failed bicose I change my cid and back to s-on then. I try to go to s-off and change my cid to 11111111.
Noting happen my cid still htc_111 I can't do s-off my hboot is 2.16.0000 I read this forums I find many solutions but no-one don't help my. Try install three roms trickdroid magiobeta and source v14 still 48 I just want get my sd card please somebody. I try many thing relock boot loader try with ruu but still 48
Click to expand...
Click to collapse
Someone may be help me with this trouble :crying::crying::crying::crying::crying::crying::crying::crying::crying:
:crying::crying::crying::crying::crying::crying: Thanks for the help :crying::crying::crying::crying::crying:
same here what should we do i have managed to install magiorom but windows shows only 48mb all i want is to get back to stock but i messed up my cid i am on roger001 but i cannot find a correct rom as i have mi mid pj4010000 please help me get back to stock
I unlocked and installed the CWM recovery. The ROM manager confirmed this was installed.
Following the guide at teamadroid.com for the twistedkat 4.4.2 ROM.
I flashed a new boot.img (from the twistedkat ROM).
Now I just see the "Only for internal use" red letters, and cannot invoke the CWM recovery for installing the ROM.
Any help would be appreciated on how to install the ROM or get back to stock.
EDIT: I progressed from this situation by re-flashing the CWM recovery, even though this emitted an error indicating that the file could not be validated or such. After this I can enter the CWM recovery.
Thanks!
qabi said:
I unlocked and installed the CWM recovery. The ROM manager confirmed this was installed.
Following the guide at teamadroid.com for the twistedkat 4.4.2 ROM.
I flashed a new boot.img (from the twistedkat ROM).
Now I just see the "Only for internal use" red letters, and cannot invoke the CWM recovery for installing the ROM.
Any help would be appreciated on how to install the ROM or get back to stock.
EDIT: I progressed from this situation by re-flashing the CWM recovery, even though this emitted an error indicating that the file could not be validated or such. After this I can enter the CWM recovery.
Thanks!
Click to expand...
Click to collapse
Do you have Ville (S4) or Ville C2 (S3) model?
If you have S4 ( I suppose due to te fact you installed TwistedKat) install this recovery --> http://goo.im/devs/philz_touch/CWM_Advanced_Edition/ville/philz_touch_6.19.3-ville.zip
The recovery provided by rom manager does NOT support Android 4.4.2 KItKat roms !!!
PLS check if you have S3 or S4
LS.xD said:
The recovery provided by rom manager does NOT support Android 4.4.2 KItKat roms !!!
Click to expand...
Click to collapse
Thanks for your suggestion.
Actually I don't know. I think only one HTC One S was ever in my market (Denmark).
In the meantime I succeeded installing the TwistedKat ROM and have it running now.
Does anybody know of a tutorial for resetting to stock ROM? (Just in case I want to revert).
-qabi
Unable to enter clockwork recovery?
I installed clockwork recovery and actually managed to install TwistedKat (what seems to be an old version).
But I am unable to enter the clockwork recovery in order to reflash to another ROM. Choosing RECOVERY from HBOOT just shows the warning screen and then halts the phone.
I have been reding through a ton of threads mentioning similar symptoms, but with no solution found.
Any help would really be appreciated!
qabi said:
I installed clockwork recovery and actually managed to install TwistedKat (what seems to be an old version).
But I am unable to enter the clockwork recovery in order to reflash to another ROM. Choosing RECOVERY from HBOOT just shows the warning screen and then halts the phone.
I have been reding through a ton of threads mentioning similar symptoms, but with no solution found.
Any help would really be appreciated!
Click to expand...
Click to collapse
I get this as well. Try it twice. For me the second time always boots up into CWM.
Can you tell me what you did to get rid of the red letters/HTC??? Did you flash boot.img again???
808phone said:
I get this as well. Try it twice. For me the second time always boots up into CWM.
Can you tell me what you did to get rid of the red letters/HTC??? Did you flash boot.img again???
Click to expand...
Click to collapse
Which recovery do you use? Are you S-OFF // SuperCID // HBOOT 2.15??
808phone said:
I get this as well. Try it twice. For me the second time always boots up into CWM.
Can you tell me what you did to get rid of the red letters/HTC??? Did you flash boot.img again???
Click to expand...
Click to collapse
The "red letters" have nothing to do with kernel. To get rid of them you must be S-Off and flash a moded hboot/firmware. There is one in the firmware thread that has the red warning removed.
@qabi: don't use CWM. Flash latest TWRP 2.7, you should be able to flash any ROM with it except the ones for 2.16 hboot
Sent from nowhere over the air...
Rapier said:
The "red letters" have nothing to do with kernel. To get rid of them you must be S-Off and flash a moded hboot/firmware. There is one in the firmware thread that has the red warning removed.
@qabi: don't use CWM. Flash latest TWRP 2.7, you should be able to flash any ROM with it except the ones for 2.16 hboot
Sent from nowhere over the air...
Click to expand...
Click to collapse
Rapier, can you explain this? A while back I loaded TWRP (S-ON) then loaded one of the CM series (either 11 or 10, can't remember). Then after I flashed boot.img, I was stuck in boot loop with HTC/red letters.
The reason I was asking what he did was I never did get to stop the boot loop myself. I paid to get it fixed, but I would like to know what I should have done to fix the boot loop after flashing the boot.img and having the problem. Seems like a lot of people get this so, so would be nice to know.
I was basically following everything listed on a web page and everything was working. Unlocked boot loader, SuperSU, TWRP etc... the last thing I did was flash the boot.img and then the problems occurred.
As far as the double try for CWM, I am S-OFF, 2.15 and I noticed it happens every now and then. I don't have this issue with TWRP at all.
It is hard to say why, apparently you did all right. What I can think off is a bad download or a bad flash or you could have used a wrong TWRP version. Also that ROM you have tried could have issues. It is very hard to know why without some logs that shows what went wrong
Sent from nowhere over the air...
LS.xD said:
If you have S4 ( I suppose due to te fact you installed TwistedKat) install this recovery -->
Click to expand...
Click to collapse
After much mucking about I flashed the "philz" recovery. That helped alot - I can now enter recovery every time. So apparently the original CWM recovery has problems on the HTC one S.
Thanks for your suggestions guys!
qabi said:
After much mucking about I flashed the "philz" recovery. That helped alot - I can now enter recovery every time. So apparently the original CWM recovery has problems on the HTC one S.
Thanks for your suggestions guys!
Click to expand...
Click to collapse
I think so. I am running the latest CWM and never had problems before this.
HI! Today I got an HTC Sensation from a friend and it was laggy due to it's stock rom with preinstalled apps and stuff, so I decided to move to a custom ROM, the first one which caught my eye was 5.0 CM12 from the development section, so I copied it to sdcard.
I have managed to unlock the bootloader through the htcdev site and then flashed the lasted CWM Recovery available, 5.8.0 and then formatted cache, data, system, dalvik, because that's what I've always been doing on my Galaxy S2, it was very straight forward.
But now, I can't install a custom rom, tried that one and the slim pyramid one, even a cyanogenmod rom but still no luck. It would abort the installation and output an error about filesystems which can't be found or it woudn't say nothing but will restart the phone straight to recovery mode.
Also, tried 4ext recovery and still no luck. At this point I started panicking and tried to resolve this by installing the stock rom, RUU.
Downloaded RUU_PYRAMID_ICS_HTC_Europe_3.33.401.53_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_280871_signed , which is the perfect match for my phone but also fails to finish installation, telling me something about failed/unknown mounts/filesystem... If it will help, I will tell you exactly what the error is.
At this moment I have S-On in bootloader, and can't see any radio serial metioned at the top. Tried some instructions flashing PG58IMG.zip , but it doesn't seem to do anything.
Please, help me out because at this point my phone won't go anywhere but bootloader and recovery.
AKAndrew41 said:
HI! Today I got an HTC Sensation from a friend and it was laggy due to it's stock rom with preinstalled apps and stuff, so I decided to move to a custom ROM, the first one which caught my eye was 5.0 CM12 from the development section, so I copied it to sdcard.
I have managed to unlock the bootloader through the htcdev site and then flashed the lasted CWM Recovery available, 5.8.0 and then formatted cache, data, system, dalvik, because that's what I've always been doing on my Galaxy S2, it was very straight forward.
But now, I can't install a custom rom, tried that one and the slim pyramid one, even a cyanogenmod rom but still no luck. It would abort the installation and output an error about filesystems which can't be found or it woudn't say nothing but will restart the phone straight to recovery mode.
Also, tried 4ext recovery and still no luck. At this point I started panicking and tried to resolve this by installing the stock rom, RUU.
Downloaded RUU_PYRAMID_ICS_HTC_Europe_3.33.401.53_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_280871_signed , which is the perfect match for my phone but also fails to finish installation, telling me something about failed/unknown mounts/filesystem... If it will help, I will tell you exactly what the error is.
At this moment I have S-On in bootloader, and can't see any radio serial metioned at the top. Tried some instructions flashing PG58IMG.zip , but it doesn't seem to do anything.
Please, help me out because at this point my phone won't go anywhere but bootloader and recovery.
Click to expand...
Click to collapse
install latest 4ext from here
http://d-h.st/rG7
extract the recovery.img and flash it via fastboot command
the command is fastboot flash recovery recovery.img
then from 4ext format all partitions except sdcard
enable smartflash( because you are on S-ON)
flash the custom rom
note: enable smartflash exactly before flashing the rom
Thank you very much! I've managed to install SKimKAT now. But how can I get S-Off permanent? Also, I can't install the stock RUU firmware.
RUU_PYRAMID_ICS_HTC_Europe_3.33.401.53_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_280871_signed
It freezes on the "sending" stage for hours.
AKAndrew41 said:
Thank you very much! I've managed to install SKimKAT now. But how can I get S-Off permanent? Also, I can't install the stock RUU firmware.
RUU_PYRAMID_ICS_HTC_Europe_3.33.401.53_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_280871_signed
It freezes on the "sending" stage for hours.
Click to expand...
Click to collapse
see this guide
http://forum.xda-developers.com/showthread.php?t=2751187