hello @all,
where can i get some informations of how to port a kernel to a specified device?
i'll try to port the kernel 2.6.35 to a LG-P500 device, but i don't know what i MUST do for this.
have just copied some LG drivers files from kernel .32 to .35, made modifications in GPIO (GPIO calls has changed) and registered the device in Kconfig, Makefiles and includes/defines - but i think this can't be all what i have to do
does exist a android kernel mailing list or a howto port a kernel in general somewhere?
Greets & thanks
Another anything known about this in the last year BUMP
If you are a developer, and wish to have a device merged into Omni, here is the current "temporary" process to use. There are 2 ways to do this - make your tree available on github (or a similar service), or request a new git tree be created, and submit it to gerrit.
1) Get your device working. There's plenty of help available in #omnirom on Freenode if you need assistance. An AOSP device tree is probably the best place to get started.
2) Set up your device to use the OmniROM "custom" build type, rather than full/aosp. More information will follow on this step - check device/samsung/manta or device/lge/mako for an example.
3) Make your device tree available on github or a similar git service. Please retain authorship of an original tree (if you fork it from AOSP or another custom ROM)
4) Come to #omni on Freenode, and have a chat to one of the core developers (they are listed at the top of the user list) - they will be able to help you get your device merged
Please note, in order to add a new device, we will require a maintainer on an ongoing basis for it, to ensure someone is able to investigate bugs that users report on a device. Without this, we unfortunately cannot enable nightly builds for a device.
will a cm kernel tree work for the most part with just a few changes?
azoller1 said:
will a cm kernel tree work for the most part with just a few changes?
Click to expand...
Click to collapse
yes - of course it must be 10.2 (4.3)
most likly it will work even unchanged
pulser_g2 said:
3) Make your device tree available on github or a similar git service. Please retain authorship of an original tree (if you fork it from AOSP or another custom ROM)
Click to expand...
Click to collapse
Along these lines, do NOT remove copyright attributions of a changed file. You may ADD copyrights to a header, but do NOT remove anything.
maxwen said:
yes - of course it must be 10.2 (4.3)
most likly it will work even unchanged
Click to expand...
Click to collapse
Most likely kernel change will be that reverting out that MDP sync point mess used by CM's AOSP+CAF frankendisplay. Can't link to it from my current location.
I have everything device sided transformed to Omni (m7ul,m7-common,and msm8960) and have exactly this problem now. Builds fine but Stucks after a few secs booting and hard reboots. Already looked into kmsg with maxwen but now we need to find what's causing it...
Reverted some stuff (MDP) kernel sided but haven't succeeded so far. Would be appreciated if u point us there when u back on a pc
noNeedForAsig
TF300T
OK here goes..
For the Asus Transformer TF300T the kernel forked from the CyanogenMod github:
https://github.com/scanno/android_kernel_asus_tf300t/tree/android-4.3
And the device tree, modified to get OmniROM to finish the build and get a bootable result:
https://github.com/scanno/android_device_asus_tf300t/tree/android-4.3
Hopefully it will be added to the OmniROM github.
n3ocort3x said:
I have everything device sided transformed to Omni (m7ul,m7-common,and msm8960) and have exactly this problem now. Builds fine but Stucks after a few secs booting and hard reboots. Already looked into kmsg with maxwen but now we need to find what's causing it...
Reverted some stuff (MDP) kernel sided but haven't succeeded so far. Would be appreciated if u point us there when u back on a pc
noNeedForAsig
Click to expand...
Click to collapse
I'm thinking for m7ul it would be https://github.com/CyanogenMod/android_kernel_htc_m7/commit/f2efb02581110747711c8b17f31f38fc3ed5dd1a
Don't want to hijack the thread though, so we can probably discuss this elsewhere
@Grarak Maybe you should post your edited device tree for Omni Rom =)
Sent From my i9500 With ☆★Crash Rom★☆
AL_IRAQI said:
@Grarak Maybe you should post your edited device tree for Omni Rom =)
Sent From my i9500 With ☆★Crash Rom★☆
Click to expand...
Click to collapse
Already on my github
https://github.com/Grarak/android_device_samsung_i9500
kernel tree
https://github.com/Grarak/android_kernel_samsung_exynos5410
proprietary
https://github.com/Grarak/proprietary_vendor_samsung
exynos 5410 repos:
https://github.com/intervigilium/android_hardware_samsung_slsi_exynos5410
https://github.com/intervigilium/android_hardware_samsung_slsi_exynos
https://github.com/intervigilium/android_hardware_samsung_slsi_exynos5
https://github.com/intervigilium/android_hardware_samsung_slsi_exynos5-insignal
https://github.com/intervigilium/android_hardware_samsung_slsi_openmax
pretty much ^^
I'd like to maintain for l900 and i605 (Sprint and Verizon Galaxy Note 2).
device trees
https://github.com/omnirom-slickrick/android_device_samsung_l900 (sprint tree)
https://github.com/omnirom-slickrick/android_device_samsung_i605 (vzw tree)
https://github.com/omnirom-slickrick/android_device_samsung_t0lte (note 2 common tree)
https://github.com/omnirom-slickrick/android_device_samsung_smdk4412-common (same as tree on omnirom github but actually more updated and device settings added back)
kernel
https://github.com/omnirom-slickrick/android_kernel_samsung_smdk4412 (just have needed device settings commits added back in)
thracky said:
I'm thinking for m7ul it would be https://github.com/CyanogenMod/android_kernel_htc_m7/commit/f2efb02581110747711c8b17f31f38fc3ed5dd1a
Don't want to hijack the thread though, so we can probably discuss this elsewhere
Click to expand...
Click to collapse
we already making progress but it needs more work to be done.. at least we are now in system with working wifi, and display but modem doesent work.. something for tomorrow, and i dont want to hijack this thread too sorry if my question was in the wrong section but i thought i mention it because of the post above mine. nevermind i cann offer to maintain m7ul as already discussed with maxwen and oin IRC but a lot of work needs to be done:
here are my sources, device trees are usable but kernel needs more work as said above:
device trees:
https://github.com/n3ocort3x/android_device_htc_m7ul
https://github.com/n3ocort3x/android_device_htc_m7-common
https://github.com/n3ocort3x/android_device_htc_msm8960-common
kernel: its a modified one but its no problem to bring it back to stock features and will push as soon asap the modem stuff is sorted out
https://github.com/n3ocort3x/android_kernel_htc_m7
EDIT modem fixed, only BT left
@sykomaniac , look at first post and become a maintainer
pulser_g2 said:
If you are a developer, and wish to have a device merged into Omni, here is the current "temporary" process to use. There are 2 ways to do this - make your tree available on github (or a similar service), or request a new git tree be created, and submit it to gerrit.
1) Get your device working. There's plenty of help available in #omnirom on Freenode if you need assistance. An AOSP device tree is probably the best place to get started.
2) Set up your device to use the OmniROM "custom" build type, rather than full/aosp. More information will follow on this step - check device/samsung/manta or device/lge/mako for an example.
3) Make your device tree available on github or a similar git service. Please retain authorship of an original tree (if you fork it from AOSP or another custom ROM)
4) Post a link here to the device tree (and kernel repository) for review, and tell us what device it is (give model numbers and board names and as many details as possible )
Click to expand...
Click to collapse
We have quite a few things that aren't working like bluetooth, camera is buggy, H/W vsync, gps, and fm radio.
https://github.com/SeannyM/android_device_samsung_kylessopen
https://github.com/SeannyM/ba2x-kernel
gt-s7560m with quadband gsm and 850/1900/2100 WCDMA/UTMS
We have a MSM7227a cpu armv7 clocked at 1008mhz stock.
645mb of usable ram
4gb of storage with 1.7 usable
233 dpi 800x480 4inch screen
Adreno 200 enhanced
5mp camera 1.3 front facing
hopefully we can get something official
single sim
Gtab2 10.1 Wifi & 3G (p5110 & p5100)
There you have my device tree for omni
p5110 :
https://github.com/sevenup30/android_device_samsung_p5110
p5100:
https://github.com/sevenup30/android_device_samsung_p5100
omap4-common (had to edit it cuz of duplicate libion entry):
https://github.com/sevenup30/android_device_samsung_omap4-common
other dependencies required from CM & Themuppets
kernel :
https://github.com/CyanogenMod/android_kernel_samsung_espresso10
samsung proprietary:
https://github.com/TheMuppets/proprietary_vendor_samsung
samsung hardware:
https://github.com/CyanogenMod/android_hardware_samsung
apps samsung service:
https://github.com/CyanogenMod/android_packages_apps_SamsungServiceMode
Everything is working (sound / wifi / bluetooth / video playback) BUT!
I must edit build.prop by hand to get sound working until omni build process take care of "product_build_prop_overrides" into custom_XXXX.mk
see:
http://forum.xda-developers.com/showthread.php?t=2484747
Original Samsung Galaxy Note
Samsung n7000 initial bringup:
Modified CM n7000 device: https://github.com/chasmodo/android_device_samsung_n7000/tree/android-4.3
Modified CM galaxys2-common: https://github.com/chasmodo/android_device_samsung_galaxys2-common/tree/android-4.3
CM smdk4412 kernel: https://github.com/CyanogenMod/android_kernel_samsung_smdk4412/tree/cm-10.2
Samsung proprietary stuff: https://github.com/TheMuppets/proprietary_vendor_samsung/tree/cm-10.2
Samsung hardware tree untouched from OmniRom.
Device info:
Board platform - exynos4
SOC - exynos4210
Board name - smdk4210
Kernel specifics - unified kernel and recovery
It compiles fine using the repos listed above, but throws up a kernel assert error when flashing the Rom. Several compilers for different devices complained about it in the 'All the answers' thread. The way out of this is to flash a CM10.2 kernel immediately after the Rom flash aborts, then Omni boots up fine.
What works:
1. telephony
2. mms
3. WiFi
4. GPS
What doesn't work:
1. data
2. bluetooth turns off as soon as you turn it on
3. both sdcards are invisible from Android; all your stuff is there when you drop into recovery, though
4. Settings/Storage FC when tapped - see #3
5. Performance options also FC
6. Notification drawer cannot be pulled down
Camera cannot be tested because it shuts down as soon as you start it, saying: "No external storage available" - again, see #3
Galaxy Note II / N7100 (International)
Samsung Galaxy Note II / N7100 Bring up details.
I have a working build of the Omni rom for the N7100. Below are the details on what is working and not working. i have been using it for the last 2 days, so far not crashes or reboots all seems to be working fine. i cherry picked a few commits and included it into my build
Working :
WIFI
DATA -3G & 2G
Telephony & MMS & SMS
GPS
Sound
Camera (Both Front and Back)
SD card
Performance control
Notification drawer & Lights
Multi-Window
roadrunner
Not Working :
BT
Backlights(if i install a custom kernel then the lights work)
Device Tree for N7100 - https://github.com/tilaksidduram/device_samsung_n7100
Device smdk4412-common - https://github.com/tilaksidduram/android_device_samsung_smdk4412-common
smdk-4412 Kernel (3.0.100) - https://github.com/CyanogenMod/android_kernel_samsung_smdk4412
samsung hardware - https://github.com/CyanogenMod/android_hardware_samsung
DEVICE: GT-N7100
sources
https://www.github.com/UtkarshGupta/android_device_samsung_n7100
https://www.github.com/omnirom/android_device_samsung_smdk4412-common
https://www.github.com/omnirom/android_hardware_samsung
https://www.github.com/omnirom/android_kernel_samsung_smdk4412
https://www.github.com/TheMuppets/proprietary_vendor_samsung
Is anyone else working on d2att/d2can (Galaxy S3 I747)? I'm not overly familiar with ROM development, but I can compile CM10.2 for this device just fine, and I'm slowly working on getting Omni to compile for it as well. If someone more experienced than I is already working on it though, I'll probably just let them do it.
If I am the only one, expect some newb-ish questions in the near future.
dstruct2k said:
Is anyone else working on d2att/d2can (Galaxy S3 I747)? I'm not overly familiar with ROM development, but I can compile CM10.2 for this device just fine, and I'm slowly working on getting Omni to compile for it as well. If someone more experienced than I is already working on it though, I'll probably just let them do it.
If I am the only one, expect some newb-ish questions in the near future.
Click to expand...
Click to collapse
I think a few are... There has been chat of it in the IRC channels.
Device name: LG Optimus 4X HD
Codename: P880
Board name: X3
Chipset: Tegra 3 AP33
Everything works, except button backlight.
https://github.com/Adam77Root/android_device_lge_p880
https://github.com/Adam77Root/android_kernel_lge_x3
https://github.com/TheMuppets/proprietary_vendor_lge
After long thoughts.. I have hatched an idea.
I need all the developers and coders I can to join with me to create a dev-team for a new line of kernel (Specifically for USB WiFi adapter support with CyanogenMod ROMs, for SGS-i9505, otherwize known as fjltexx)
•This kernel will have OTG driver support for most atheros chipset USB wireless adapters
•Inspired by me, due to limited to NO support for this ROM or device model for this specific capability
•Will come with ath9k modules, and other common modules and drivers
•Easy flash through zip file of the kernel
________Once again: DEVELOPERS NEEDED______
TO JOIN:
IM Me on Skype: dsman444, message me on here, or post "Join" below,
Any questions?
Message me or post below.
Ive made CM roms in the past but never released them and building a kernel would be awesome, can i join to learn and help also? Greets
Sent from my GT-I9505 using app: XDA Premium and rom: CarbonRom
Hi there, I'm SDR (software Defined Radio) amateur, and I'm looking to connect a USB rtl-sdr Dongle to my GT-i9003, I did a search around our forum zone and I see just a "few old" stuff about OTG and our device, some one knows if we can use it with 3.0.101 kernel? so are the modules runing?, someone did a test?.
I'm thinking build a custom kernel for that with this extra modules but I'm not a programer and I dont know fix kernel/modules issues, maybe some advanced developer knows about that or can try?.
Without more, Bye and thanks in anyway.
Best regards:fingers-crossed:.
I'm not running CM11, but with my Dhiru's 10.1 (3.0.8 kernel) I Tried to connect an USB keyboard, but no results.
crDroid(http://forum.xda-developers.com/showthread.php?t=2544686) said it support otg
but i havn't try it