Database Info

[Q] seroius!!! stuck in phone and pc logo! help!!!

i have a serious problem i tried to download the new Stock DEODEXED KC1 rom got failed in odin v1.7 then when i tried to put it back in download mode it just shows me a phone and pc with a triangle in the middle error logo. no matter what i try doesnt work at all!!!

nexio said:
i have a serious problem i tried to download the new Stock DEODEXED KC1 rom got failed in odin v1.7 then when i tried to put it back in download mode it just shows me a phone and pc with a triangle in the middle error logo. no matter what i try doesnt work at all!!!
Click to expand...
Click to collapse
dont panic!.. remove and replace the battery.. press up + down vol then plug USB cable. you will get the same screen but you will hear a sound from your computer that the usb is plugged in. then flash again.. once its completed it will back to normal.

ill try that thanx!!!

chadster214 said:
dont panic!.. remove and replace the battery.. press up + down vol then plug USB cable. you will get the same screen but you will hear a sound from your computer that the usb is plugged in. then flash again.. once its completed it will back to normal.
Click to expand...
Click to collapse
yeah what he said. happened to me once but got back on the right track

its just going very! very! slow! like if its going to take forever!

nexio said:
its just going very! very! slow! like if its going to take forever!
Click to expand...
Click to collapse
Try restarting your computer and try it again..
Sent from my SGH-T959V using XDA Premium App

Yes try restarting your pc
Open odin v1.7
Take battery out, put battery back in
Then Hold up + down volumn keys then plug usb
You will/will not get the downloading screen but don't be scared
Look on your odin flasher and make sure it is connected to com 3 or com 5(it will be highlighted in yellow), if it is then your good
Put the deodexed kc1 file in the pda tab and make sure re-partition is unticked
Then hit start, might take a bit longer but it will surely revive your phone
Hope that helps
Sent from my SGH-T959V using XDA Premium App

Mine worked on com4. The com number is of not importance.
i had the same issue
Unplug usb
Reset odin.
Reload file on pda
Reconect usb
Try again to flash
If it continues failing, download the rom again
Sent from my SGH-T959V using XDA App

still waiting halfway downloaded. after is done do i wipe data, cache, dalvik or just restart!

Can wipe if you want I didn't and it flies

now am stuck on the galaxy s 4g logo!!!

I used Odin 3_v1.0 and it worked. You need to remove the battery and reflash with Odin. If you get the phone and computer symbol just remove the usb cable, re start odin and connect the cable to your phone and try again. You do not need to remove the battery. I was able to flash my that way.

now when i try to install it fails right before its almost done weird!!! tried it 4 times already same thing every time!

nexio said:
now when i try to install it fails right before its almost done weird!!! tried it 4 times already same thing every time!
Click to expand...
Click to collapse
Close Odin. Disconnect phone. Pull battery. Put battery back in, while holding both volume buttons plug in cord. It will show the error on your phone again. Start Odin again. Load rom in PDA section. Click start. You can wipe user data and cache. And click reboot. Then give it time to rebuild. Ten minutes. The reboot again to clear up bugs.
Sent from my SGH-T959V using XDA Premium App

How do i wipe data and cache i cant even get into recovery mode!

In the recovery menu (turn phone off then hold volumn key up and power key)
Sent from my SGH-T959V using XDA Premium App

nexio said:
How do i wipe data and cache i cant even get into recovery mode!
Click to expand...
Click to collapse
It will go into recovery when it reboots itself after you flash with Odin.
Sent from my SGH-T959V using XDA Premium App

I tried all that it seems i dont have recovery cause when i install threw odin it doesnt bring it to recovery just shows glaxy s 4g logo!!! And i tried the up and down volumes that didnt work either i am so stuck wow!

nexio said:
I tried all that it seems i dont have recovery cause when i install threw odin it doesnt bring it to recovery just shows glaxy s 4g logo!!! And i tried the up and down volumes that didnt work either i am so stuck wow!
Click to expand...
Click to collapse
When you flash with Odin just leave it alone for awhile. While its flashing give it ten minutes. When its done it should be in recovery. Then just hit the power button to reboot.
If it doesn't work you have other issues. Did you flash it with a pit file? Do not flash this phone with a pit.
Sent from my SGH-T959V using XDA Premium App

Yes i did some guy put up a pit file and i flashed it and my phone went blank!

Please help me unbrick if possible.

Please help. I was using odin3 v1.85 and trying to flash the stock EP4 from the imnuts page. during the flash odin said it failed. My phone now fails to be recognized by my PC. I am not able to boot into CWM nor am I able to boot in to download mode. Any which way I try to get the phone booted up I get the screen that looks like:
cellphone...exclamation point in a triangle... computer
With the battery out of the cell, if I plug the phone into my computer, it is not recognized by the computer and no power flows to the phone
When I put the battery back in and either try to boot to CWM or download mode, I get the:
cell... exclamation point in triangle...computer.
Am I now bricked for good? Any help would be greatly appreciated. Thanks!

Are you holding the volume down button when plugging it in? Battery out, hold volume down, plug in phone... If still not recognized, try downloading an older version of odin... Then repeat... Ive had my phone at that same screen and came out ok so dont freak... Lol.
Sent from my SCH-I510 using XDA

Volume down with battery out when connected to PC. Then make sure you put the battery back in before flashing.
Sent from my ADR6425LVW using Tapatalk 2

ppreciate your Help! I think I am still bricked.
xdadevnube said:
Volume down with battery out when connected to PC. Then make sure you put the battery back in before flashing.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Once I conntect to the PC, the phone screen goes to a picture of a battery charging and won't recognixe my keys for entering download mode
stebomurkn420 said:
Are you holding the volume down button when plugging it in? Battery out, hold volume down, plug in phone... If still not recognized, try downloading an older version of odin... Then repeat... Ive had my phone at that same screen and came out ok so dont freak... Lol.
Sent from my SCH-I510 using XDA
Click to expand...
Click to collapse
Good thought. I booted up Odin3 version 1.3 and no luck. The phone will not go in to download mode but Odin1.3 will recognize the phone as plugged in, which is a step in the right direction compared to Odin3 1.85 which would not. Oh, I am beginning to "freak out" from this stress!!
Any recommendations or suggestions? Thanks ahead of time.
...

I use odin v1.82... Try that. If I rememebr right it took me several tries before I got odin to recognize my phone. So your starting with the phone off and battery out... Your holding down volume down key as you plug the phone in? and when you do that it odin recognizes your device but your device just shows that its charging? Try flashing it anyways with the .pit file and stock ep4d... If that doesnt work try flashing CWM first.. Then flash the restore package.. Sounds to me like your phone has been absolutely wiped so you have no recovery image. I think thats finally what got me up and running again.. This is a fixable situation, dont give your hopes up!!!!
Sent from my SCH-I510 using XDA

shopperschmenj said:
Once I conntect to the PC, the phone screen goes to a picture of a battery charging and won't recognixe my keys for entering download mode
Any recommendations or suggestions? Thanks ahead of time.
...
Click to expand...
Click to collapse
Take out the battery and it shouldn't do that.

Fixed.
Thanks to everyone for your help. I used the IMNUTS recommendation on how to "fix my phone" and it worked. Again, thanks for the help!

I was flashing my phone with Heimdall but it failed and now my phone isn't turning on

Like what the title says, I was in the midst of flashing my phone via Heimdall but one of the updates read "fail" and the program was frozen. Stupidly, I unplugged my phone from the usb cable and turned off the phone. I tried to reboot it again but it isn't turning on. Did I f*ck up my phone for good or is there ANY way I can save it? I really would appreciate any help.

I doubt your phone is bricked...try putting it back in download mode and run heimdall again
Download mode:
Pull battery
Put battery back in
Hold both volume buttons
Connect USB storage while holding volumes
If anything pops up your in download mode...unless its a Samsung logo...if you see that you didn't do it right...
Sent from my HTC PH39100 using Tapatalk 2

Also try the 1 click unbrick
Sent from my SGH-I997 using xda app-developers app

As MG said i aslo doubt that ur phone is hard bricked if it was not stuck at the BL flash. Keep tryin to put ur phone in DL mode.

in some rare cases the actual jpg file for download mode gets corrupt but the bootloader is still capable of entering download mode. have heimdall open with the stock rom setup to flash and see if it recognizes a connection, if it does then just flash

[Q] Samsung infuse does not startup

I was in chat when the cell was shut down suddenly and would not start, remove the battery and insert her again, was there when the phone lit immediately insert the battery but still in a cycle..
the phone on and off, on and off, and so on..
I need help :S
Is there any way to fix it?
PD: Sorry for my bad english.
Sent from my LT15i using Tapatalk 2

My infuse does this too, i cant even get recovery mode or download mode. Even tryed taking apart my phone and cleaned the power button and its still effed up. Anyone got a fix to this?
Sent from my Galaxy Nexus using xda app-developers app

Dhlan said:
I was in chat when the cell was shut down suddenly and would not start, remove the battery and insert her again, was there when the phone lit immediately insert the battery but still in a cycle..
the phone on and off, on and off, and so on..
I need help :S
Is there any way to fix it?
PD: Sorry for my bad english.
Sent from my LT15i using Tapatalk 2
Click to expand...
Click to collapse
When you say on, off, on, off. Do you mean the lights flash then it goes off or does it try to boot?
Can you get into download mode?
Have you tried a different battery or left the battery out for an hour or so, then tried again?

Truckerglenn said:
When you say on, off, on, off. Do you mean the lights flash then it goes off or does it try to boot?
Can you get into download mode?
Have you tried a different battery or left the battery out for an hour or so, then tried again?
Click to expand...
Click to collapse
it does try to boot but then nothing happen..
i've never get into download mode :S how i do that?
Yes, i tried different battery and it does the same with both.
any solution? could be some files from the software are missing? repair software? u.u

First you need to download Heimdall or Odin from the ISET page to you PC. I believe Odin uses the Kies drivers and Heimdall replaces the with a Samsung composite driver. I personally use the Heimdall back to stock that is rooted.
Once you have them and decide which one you will use, you will need to get into download mode. Take the battery out, connect USB to phone and preferably a rear USB port on your PC. Hold volume up and down, No Power button though, and then insert the battery. This should put you in download mode and you need to push volume up to get to it. Volume down cancels it and will reboot. You may want to just try that one time to see if it corrects the problem. If not, repeat steps to get to download and flash either Odin to Heimdall and then start flashing again.
Read the instructions on the OP of Odin or Heimdall and ask questions if you aren't sure of what to do.
Sent from my SGH-i997 using xda premium

psal217050 said:
First you need to download Heimdall or Odin from the ISET page to you PC. I believe Odin uses the Kies drivers and Heimdall replaces the with a Samsung composite driver. I personally use the Heimdall back to stock that is rooted.
Once you have them and decide which one you will use, you will need to get into download mode. Take the battery out, connect USB to phone and preferably a rear USB port on your PC. Hold volume up and down, No Power button though, and then insert the battery. This should put you in download mode and you need to push volume up to get to it. Volume down cancels it and will reboot. You may want to just try that one time to see if it corrects the problem. If not, repeat steps to get to download and flash either Odin to Heimdall and then start flashing again.
Read the instructions on the OP of Odin or Heimdall and ask questions if you aren't sure of what to do.
Sent from my SGH-i997 using xda premium
Click to expand...
Click to collapse
I did what you said multiple times but evertime i do it it just goes straight to the charging screen then reboots and keeps doing the samething?

It seems your power button is faulty. You might need to open it up and clean the contacts or get it repaired.
Sent from my sweet & buttery Infuse

andros11 said:
It seems your power button is faulty. You might need to open it up and clean the contacts or get it repaired.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
yeah i just opened it up afew min. ago.. still same problem.. looks like i need to repair the power button.. thanks

playing with soder
crookx said:
yeah i just opened it up afew min. ago.. still same problem.. looks like i need to repair the power button.. thanks
Click to expand...
Click to collapse
i opened it up and put my soder to it and it stoped boot looping but i think i did a bad job cuz the power button is not functioning is there a way to turn on without the power button

texmextech said:
i opened it up and put my soder to it and it stoped boot looping but i think i did a bad job cuz the power button is not functioning is there a way to turn on without the power button
Click to expand...
Click to collapse
install ADB for windows and type the command
adb devices
(if your device's S/N is listed then type)
adb reboot

Unbrick your Motorola Fire XT

Download the two things needed:
ROM : XT530 European
RSD Lite v5.6 : Motorola Flashing tool
HI all I have seen many users on internet who had bricked their phone by rooting.(I was also the one :laugh: )
I will tell u how to unbrick your phone and bring it back to working state.
(I am not responsible for any damage to your phone. I have tried it on my cell and finished successfully)
You would be requiring Motorola USB drivers.You can download it from official website.
Steps:
1. Install RSD Lite v5.6(Link attached) and open it.
2. Take your phone in your hand connect to your windows PC via USB cable holding volume down (-) and camera button.
3. Once you see the boot-loader screen on your phone see if it's showing up in RSD.
4. If it is then you are ready to bring back your phone to working mode.
5. Extract the ROM you downloaded before in your pc using winrar.
6. Go back to RSD and navigate it to the file you just extracted.
7. If your device shows up and Rom loads in RSD then you are just a click away.
8. Finally click on start.
9. It will start flashing rom and within 4-5 minutes your phone will be working fine.
10. After disconnecting your phone, it will be in FTM mode. Just hold Volume up(+) and power button it'll restart the device.
Warning : It wipes all your data in phone memory including contacts,apps and messages.
Note : Do this if and only if RSD stuck for more than 5 minutes.
Its being very rare but if you get this problem that in the end after your phone gets in FTM mode and the process In RSD stuck on Executed 100%. Don't worry just unplug your phone, remove battery, keep it for 5-10 seconds place battery and again connect it and start boot loader mode as you started above. It will show finish.
All I want is you to click on THANKS
So it will increase my encourage me to post new threads.
If you face any problem please reply or message.
The whole process doesn't take more than five minutes.
Good luck. And reply me back your experience.

aweosomeabhijeet said:
Download the two things needed:
ROM : www(dot)mediafire.com/?h73a80xuhs0ii8j
RSD Lite v5.6 : goo(dot)gl/TuH91
(Please replace dot with . as i am not able to post links)
HI all I have seen many users on internet who had bricked their phone by rooting.(I was also the one :laugh: )
I will tell u how to unbrick your phone and bring it back to working state.
(I am not responsible for any damage to your phone. I have tried it on my cell and finished successfully)
You would be requiring motorola USB drivers.You can download it from official website.
Steps:
1. Install RSD Lite v5.6(Link attached) and open it.
2. Take your phone in your hand connect to your windows PC via USB cable.
3. Go into boot-loader mode by holding the volume down(-), camera and power button.
4. Once you see the boot-loader screen on your phone see if it's showing up in RSD.
5. If it is then you are ready to bring back your phone to working mode.
6. Extract the ROM you downloaded before in your pc using winrar.
7. Go back to RSD and navigate it to the file you just extracted.
8. If your device shows up and Rom loads in RSD then you are just a click away.
9. Finally click on start.
10. It will start flashing rom and within 20-25 minutes your phone will be working fine.
11. After disconnecting your phone, it will be in FTM mode. Just hold Volume up(+) and power button it'll restart the device.
Warning : It wipes all your data in phone memory including contacts,apps and messages.
Note : Do this if and only if RSD stuck for more than 5 minutes.
Its being very rare but if you get this problem that in the end after your phone gets in FTM mode and the process In RSD stuck on Executed 100%. Don't worry just unplug your phone, remove battery, keep it for 5-10 seconds place battery and again connect it and start boot loader mode as you started above. It will show finish.
Guys I am sharing my useful information with you so all I want is you to click on THANKS
So it will increase my encourage me to post new threads.
If you face any problem please reply or message.
Click to expand...
Click to collapse
Thanks! But, my Fire XT was unrooted and I'm not sure if I should proceed with this. You have read my other thread over at Android Q & A. Please tell me if I should proceed with this or not.
Sent from my asus_laptop using Tapatalk 2

You can use it.
It works on both
Sent from my XT530 using xda app-developers app

I tried it. My phone does not seem to go into download mode. Any idea why? I held down the three keys for more than 5 minutes, but the white lights just keep showing. Nothing else happens.
Update: The phone screen turned on after a few minutes of holding down the buttons. It shows a screen where there's a battery icon. I believe the phone was severely drained. No other reason for it. But why didn't the screen show when I had plugged it into the computer yesterday or when I tried charging it for hours long back?
I'll keep you posted when the phone turns on.

I think it's some hardware error you got.
I too had the same problem you have.
I returned it to the sc they replaced it's motherboard.
But I think your phone turned on for a reason known as stack charging.
It is cycle of continous charging. Let it charge and ensure that battery is more than 70%.
Then you can perform this procedure.
Sent from my XT530 using xda app-developers app

Nice
Thanks to you I have hope to fix my phone. I will post again if this works!
THANKS!

Help with bootloader
My bootloader wont install correctly. I can get into flash mode but it wont show up on my computer.

Froggywoggy25 said:
My bootloader wont install correctly. I can get into flash mode but it wont show up on my computer.
Click to expand...
Click to collapse
Try pulling the battery, putting again and connect your phone with volume down(-) and camera button pressed.
See if that works.
Sent from my XT530 using xda app-developers app

Didnt work
I tried it but the driver "Flash MSM7227" cannot install correctly. Because of this it wont show up in RSD Lite. Do you know how to go into download mode?

Froggywoggy25 said:
I tried it but the driver "Flash MSM7227" cannot install correctly. Because of this it wont show up in RSD Lite. Do you know how to go into download mode?
Click to expand...
Click to collapse
Install latest moto drivers.
Sent from my XT530 using xda app-developers app

Already did that. Do you know how to get to download mode?

Froggywoggy25 said:
Already did that. Do you know how to get to download mode?
Click to expand...
Click to collapse
There are only three modes in XT530
1. Flash mode
2. Recovery mode
3. FTM mode
Of them which one you are talking about?
I think other name of flash mode is download mode.
Sent from my XT530 using xda app-developers app

I think you did something wrong because all other people succeeded in this.
Sent from my XT530 using xda app-developers app

I plugged it into my computer. Went into flash mode. It doesnt show up on RSD lite because the driver is missing for some reason.
Unless im missing something?

Froggywoggy25 said:
Any of them. I can only get to recovery and flash. I dont think flash and download are the same though.
Click to expand...
Click to collapse
Enquired bout it. They are same only.
And try that with some other pc and follow the steps carefully.
Sent from my XT530 using xda app-developers app

Thanks
aweosomeabhijeet said:
Download the two things needed:
ROM : www(dot)mediafire.com/?h73a80xuhs0ii8j
RSD Lite v5.6 : goo(dot)gl/TuH91
(Please replace dot with . as i am not able to post links)
HI all I have seen many users on internet who had bricked their phone by rooting.(I was also the one :laugh: )
I will tell u how to unbrick your phone and bring it back to working state.
(I am not responsible for any damage to your phone. I have tried it on my cell and finished successfully)
You would be requiring motorola USB drivers.You can download it from official website.
Steps:
1. Install RSD Lite v5.6(Link attached) and open it.
2. Take your phone in your hand connect to your windows PC via USB cable.
3. Go into boot-loader mode by holding the volume down(-), camera and power button.
4. Once you see the boot-loader screen on your phone see if it's showing up in RSD.
5. If it is then you are ready to bring back your phone to working mode.
6. Extract the ROM you downloaded before in your pc using winrar.
7. Go back to RSD and navigate it to the file you just extracted.
8. If your device shows up and Rom loads in RSD then you are just a click away.
9. Finally click on start.
10. It will start flashing rom and within 4-5 minutes your phone will be working fine.
11. After disconnecting your phone, it will be in FTM mode. Just hold Volume up(+) and power button it'll restart the device.
Warning : It wipes all your data in phone memory including contacts,apps and messages.
Note : Do this if and only if RSD stuck for more than 5 minutes.
Its being very rare but if you get this problem that in the end after your phone gets in FTM mode and the process In RSD stuck on Executed 100%. Don't worry just unplug your phone, remove battery, keep it for 5-10 seconds place battery and again connect it and start boot loader mode as you started above. It will show finish.
Guys I am sharing my useful information with you so all I want is you to click on THANKS
So it will increase my encourage me to post new threads.
If you face any problem please reply or message.
The whole process doesnt take more than five minutes.
Good luck. And reply me back your experience.
Click to expand...
Click to collapse
Thanks for this turorial. You saved lot of my time..

xt311
goodwill2012 said:
Thanks for this turorial. You saved lot of my time..
Click to expand...
Click to collapse
is this for xt311

socioan said:
is this for xt311
Click to expand...
Click to collapse
The tutorial will be the same but ROM is not.
Sent from my XT530 using xda app-developers app

Deleted google play on unrooting
aweosomeabhijeet said:
The tutorial will be the same but ROM is not.
Sent from my XT530 using xda app-developers app
Click to expand...
Click to collapse
I accidently deleted my google play store and google search app during unrooting by superclick. Where can I get this apps. Help

It works for boot loop?