Flash RUU to fix GPS, will I lock the bootloader? - HTC Sensation

Basically, the GPS on my Sensation wont find any satellites. I tried OpenSensation and ARHD and the GPS doesn't work on either. I read on Google that someone flashed the appropriate RUU for them and reflashed their custom ROM and the GPS started working again. I was going to do the same but was wondering if I flash the T-Mo ICS RUU, will it lock the bootloader? If so, how would I unlock it again? Also, if anyone has any tips to fix the GPS, any help is appreciated.

munkyvirus said:
Basically, the GPS on my Sensation wont find any satellites. I tried OpenSensation and ARHD and the GPS doesn't work on either. I read on Google that someone flashed the appropriate RUU for them and reflashed their custom ROM and the GPS started working again. I was going to do the same but was wondering if I flash the T-Mo ICS RUU, will it lock the bootloader? If so, how would I unlock it again? Also, if anyone has any tips to fix the GPS, any help is appreciated.
Click to expand...
Click to collapse
RUUs are ideally last choices.
Also, I'm assuming you are HTC Dev unlocked (you need to confirm this), if yes, then did you enable smart flash in 4ext recovery before flashing or flash the boot.img manually?
Try performing a full wipe/format before installing the ROM.
If you are S Off, then try installing 3.32 base firmware
If all of the above fail, use my guide to find & flash the correct RUU: www.tinyurl.com/RUUGuide

I am unlocked through revolutionary, I don't know if that is HTC-Dev, but I doubt it. I don't know about smart flash either, what is it? I full wiped and installed 5 different OpenSensation builds and the T-Mo ARHD version with no GPS on either. I also flashed the 3.32 firmware from the official ICS T-Mo firmware. Radio's too, went from 11.69 to 11.72. I want to flash the RUU to reset all the radios, firmware and such. But I am worried the bootloader will get locked down again.
My plan is to flash the RUU, test the GPS, then restore my clockwork backup of my current ROM and go from there. Would it be easier to just flash a Gingerbread RUU?

munkyvirus said:
I am unlocked through revolutionary, I don't know if that is HTC-Dev, but I doubt it. I don't know about smart flash either, what is it? I full wiped and installed 5 different OpenSensation builds and the T-Mo ARHD version with no GPS on either. I also flashed the 3.32 firmware from the official ICS T-Mo firmware. Radio's too, went from 11.69 to 11.72. I want to flash the RUU to reset all the radios, firmware and such. But I am worried the bootloader will get locked down again.
My plan is to flash the RUU, test the GPS, then restore my clockwork backup of my current ROM and go from there. Would it be easier to just flash a Gingerbread RUU?
Click to expand...
Click to collapse
Here's what happens after flashing the RUU:
You will lose all data (except data on SD Card)
Your bootloader will be locked, but if you're S Off, you will remain S Off (You can get back to Revolutionary bootloader by flashing 3.32 base firmware from firmware thread.)
You will lose custom recovery if custom recovery is installed (this can be re flashed if you are S Off )
You will lose root if you are rooted. (this can be re done)
I recommend you flash the normal 3.32 base firmware from the firmware thread before flashing RUU.

i used to have the same issue as yours...
i tried this fix ..it works for sensation too
http://forum.xda-developers.com/showpost.php?p=12764930&postcount=1
i used method 2 to do that ..method 1 failed for me
but be careful when using dd commands..you need to be extremely careful while typing that
also the fix..messes up your splash screen ..but you can easily flash the splash screen again

I tried the wiping thing, but it didn't work, I'm going to flash the RUU. If it doesn't work, it's borked, I guess.

Nothing, I flashed a Gingerbread RUU and the ICS RUU with no change. I am going to take it to T-Mobile in a few days. Any final, shot in the dark, tips?

munkyvirus said:
Nothing, I flashed a Gingerbread RUU and the ICS RUU with no change. I am going to take it to T-Mobile in a few days. Any final, shot in the dark, tips?
Click to expand...
Click to collapse
Yes. Open up the back cover & check if all antennae are making contact. If not, apply aluminium foil. Take a strip, fold it till it's the right size, but ensure it isn't very thick, just a little more than enough to make contact & not tear.

First of all, Hello.
I don't want to make another GPS topic, so i write it down here. The thing is that i bought a used HTC Sensation XE and everything is working great except the GPS. I have read all the sensation threads about fixing the problems with GPS and i think i tried most of them without any luck.
I installed the free GPS apps from Market (GPS Status, GPS Test and the fix named FasterFix). It just won't find any satellites and that's it.
It wont lock on nothing and it wont find nothing.
* At the beginning when i started FasterFix it showed that the conf. is set to America. I live in Europe. So that really made sense, that if i change it to Europe, then it should work because the conf. is just wrong.
I have tried all kinds of fixes (FasterFix, modifying the gps.conf file), tried the Sensation topic named AGPS patch and flashed the gps fix .zip.
Tried all kinds of gps.conf files and putting the right server names in there Europe, Estonia. Tried the wipe and format and reinstalling Locations.
I didnt want to root the phone and use custom ROM, but nothing seemes to help fixing the GPS problem, so in last option i rooted phone, did the S-OFF and all the stuff so its unlocked and tried custom ROM.s. I was fingers crossed and hoped that the ROM change will magically fix my whatever errors with GPS but nothing. I tried :
* [ROM][Sense 4.1][20.01] Team Venom presents: ViperS 1.6.3
* [ROM][CM10][Kang][Pyramid][4.1.2][09 JAN]
Yesterday after i did full wipe and tried the vision wipe fix (Method 1) + Reinstalling Locations. I went outside and started up the GPS, i used AGPS fix configuration file. So i started GPS Status and waited for ~30sec. it magically found 5 sats and after waiting couple minutes or so, it finally locked up and managed to get the right position. I was so happy and thought that i finally fixed it after tried everything in 2 days. So later on that day i went driving with my car and wanted to test the GPS in real. I fired the sucker up and NOTHING. No sats, nothing. And here i am, again searching for help.
I really like this phone and i need to get that god damn GPS working. Please any help is welcome. What else can i try?
Can it really be the GPS unit itself what is defective? Well it found sats and locked up on them yesterday, so i think something has to work but there is some error somewhere.
------------------------------------------------
EDIT:
OOh my god! I managed to FIX my problem! What a relief and of course im telling you how.
My problem was that antenna contacts didn't give a good connection between the housing. I played with the housing and watched the GPS Test software, so if the connection was OK, it automatically detected sats and if i moved the housing again, they disappeared.
I tried the aluminium foil trick and it helped but i didnt much like the idea of some loose foil inside of my phones housing. So i checked up the antenna contacts and tried to figure out what the heck was the problem, because if there was a cap between the housing and phone itself, there was a signal and as soon as i locked the housing to the phone - Baah! nothing, the signal was gone. I opened the housing and took a scalpel. Next i really carefully bended the antenna contacts, so if first they were shaped like "/\" then after the bend they looked like " L ", with that trick applied they now get a good contact with the housing and the GPS is working as it should.
I hope it will help someone, who might have the same problem. The phone is Sensation XE with beats audio.
The easy was is to first try the foil trick, if it helps then you know it's the contacts.
The GPS antenna contacts are located between the camera lens and the battery. At least these contacts worked for me, after the bend.

Related

[Q] Desire S loosing signal

Hi all,
A week ago I bought a brand new Desire S and installed latest CM 7.1 stable following the guide on cyanogemod Desire S Wiki using revolutionary 0.4pre4. Everything was smooth and nice, I flashed ROM and GAPPS and my phone is working absolutely perfectly... but there is one little problem...
I am using Desire to fetch my mails from 2 mailservers using IMAP every 30 mins. But when the phone is switching between network modes i.e. HSDPA -> EDGE or EDGE -> GSM or any other way, I am disconnected from operator network for about 10 seconds until the network mode changes and everything is fine after that, until there is another network mode switch.
This happens for me about 10 times a day, so my phone sometimes appears that It is turned off for people who want to call me. Immediately after connecting to network I get a missed call SMS from my operator.
Interesting thing is, that when I disable email fetching, disable background data transfer and disable network data, the phone works fine without "blackouts".
Can someone help me with this problem? Maybe a radio issue?
Some more info:
ROM: Cyanogenmod 7.1.0 Desire S
Recovery: Revolutionary CWM v4.0.1.4
HBOOT: 6.98.1002
Kernel: 2.6.35.14-cyanogenmod+ [email protected] #1
Radio: 20.28I.30.085AU_3805.06.02.03_M
There is a newer radio-file online.
Maybe it's solving your problem.
I'm using MIUI and never had such problems, but i'm interested in flashing CM, so please report if the problem is gone by flashing newer radio!
Which radio version are you using?
Today I am testing 2G only switch so I am on EDGE data only.
Flashing radios is safe......, but a bad radio flash will instantly brick your phone.
You are using 1.47.401.4 radio, try updating to the 2.10.401.5 one.
Thanks for reply.
Shoud I flash something else with the radio?
I have 20.4801.30.0822U_3822.10.08.04 downloaded from cmw.22aaf3.com
Another I have is ftom OTA update zip file OTA_Saga_S_HTC_Europe_2.10.401.8-1.47.401.4_release_225210fmxlt12djw1sr7y5.zip where is one radio.img in formware.zip file too - version unknown
So Which one to flash?
and if so, which method should I use to flash radio? The Android SDK one or the ZIP + Bootloader one?
MyroLM said:
Shoud I flash something else with the radio?
Click to expand...
Click to collapse
no need
MyroLM said:
I have 20.4801.30.0822U_3822.10.08.04 downloaded from cmw.22aaf3.com
Click to expand...
Click to collapse
this file is what ur looking for! check md5-checksum before flashing!
MyroLM said:
and if so, which method should I use to flash radio? The Android SDK one or the ZIP + Bootloader one?
Click to expand...
Click to collapse
Both will work, i'm using method by using bootloader normaly
Strangely I had the same issues as you on Endymion.
Then I updated radio to the latest.
It worked well.
Then I went to CM7. It was fine for a while, but now I'm losing signal with no 3G bars and its not switching automatically to 2G like it should when It has no 3G signal!
EDIT:
After really reading your post, I realise my issue is no way like yours! Yours seems really bad. Update your radio.
-------------------------------
Sent from my HTC Desire S
So, here we go with the results
I flashed 20.4801.30.0822U_3822.10.08.04, md5sum checked OK, update sucess, but phone with no signal...
I flashed 20.48.30.0822U_3822.09.08.20, md5sum checked OK, update sucess, but phone with no signal again...
I flashed 20.28I.30.085AU_3805.06.02.03 back, md5sum checked OK, update sucess, but phone with no signal again...
... what now ... ?
After each flash wiped cache and Dalvik...
in your telephone-info there is shown the new radio after every flash?
do you have removed the batterycover, because there is integrated the antenna of your device!
mouzzza said:
in your telephone-info there is shown the new radio after every flash?
Click to expand...
Click to collapse
Yes, correct number every time.
mouzzza said:
do you have removed the batterycover, because there is integrated the antenna of your device!
Click to expand...
Click to collapse
No, the cover is at its place where it should be. Somehow I did the trick and I am back online with 20.28I.30.085AU_3805.06.02.03 on 2G only for now.
I read somwhere in the forum that ENG HBOOT is required for new radios... Are you sure I dont need to flash eng hboot it before new radio ??
MyroLM said:
Somehow I did the trick and I am back online with 20.28I.30.085AU_3805.06.02.03 on 2G only for now
Click to expand...
Click to collapse
in your area 3g is actually available?
may it helps to go outside, to find your net for the first time!
did you set an accesspoint for 3g?
may you have to set automatic settings, rather than 3g/2g-only?!
MyroLM said:
I read somwhere in the forum that ENG HBOOT is required for new radios... Are you sure I dont need to flash eng hboot it before new radio ??
Click to expand...
Click to collapse
using same hboot as you, never had problems on flashing radio-files!
yes, in my area there is 3g, when I turn off 2g only switch there is a problem described in my first post, so i am on 2g for now just to keep phone connected to network.
main problem is when i am driving and the phone is switching network modes.
so I give 20.4801.30.0822U_3822.10.08.04 today another chance, try to flash if again.
but i am woried about stucking on HTC logo after flash :-( and brick it.
MyroLM said:
but i am woried about stucking on HTC logo after flash :-( and brick it.
Click to expand...
Click to collapse
i already had the problem for several times, and i also pulled out the battery (you shouldn't do that)!
only had to boot into bootloader, start recovery, wipe all partitions, flash rom and was having fun again with my device
this thread could help you, if really stuck on HTC logo
For your real problem on loosing the signal, did you ever tried out using actual stock rom, or another custom one like MIUI?
i used MIUI from 2010-08 till yesterday, now trying out CM7.1 for some days
I have the same or a very similar problem. I have the stock rom.
I already had 3 different desire s motherboard's and 2 different display's.
The first Desire S i had, with android 2.3.3, had a excellent signal. Due some problems i had, the phone bricked and had to go to HTC to repair.
HTC replaced the motherboard and update the version of the android to 2.3.5 and ever since the signal caption, the signal switch was working very bad.
The phone went to a second repair because of this, new phone, and again with android 2.3.5. The problems persisted.
I also tested with different SIM cards, from different mobile operators.
So, my conclusion is either android 2.3.5 or this new versions of Desire S have problems with signal caption and signal switch.
So as you, i need some help with this issue!
mouzzza said:
i already had the problem for several times, and i also pulled out the battery (you shouldn't do that)!
only had to boot into bootloader, start recovery, wipe all partitions, flash rom and was having fun again with my device
this thread could help you, if really stuck on HTC logo
For your real problem on loosing the signal, did you ever tried out using actual stock rom, or another custom one like MIUI?
i used MIUI from 2010-08 till yesterday, now trying out CM7.1 for some days
Click to expand...
Click to collapse
But when I reboot to recovery it will flash the radio again I think.
i hate stock roms, and dont like MIUI design That is why I am using Cyanogen
Anyway if I use 2G only switch, the phone is stable as rock both calls and data transfer.
EDIT: OK, flashed 20.4801.30.0822U_3822.10.08.04 sucessfully, signal OK, I will see what happens whet metwork mode switches
@Green Hawk:
give us more information about your device please, which radio you're using? Did they flash actual radion also?
@MyroLM:
report if the problem is still there or it's gone with flashing the rom
I am still testing new radio, but looks good Give me some days let you know...
Hi All,
I have a similar problem with the latest CM7.1 nightly builds (Reaper, jorgen2009). I never saw this with older CM7.1 versions, e.g. Nexx version, ICS, MIUI oder Endymion.
I have WLAN on and leave my house. Phone switches to 2G/3G..., so far so good. When I return home, The WLan sign in the status bar appears again, everything seems to be fine, but I have no connection. I get no data via WLan until I swicth WLan off and on again.
Radio is the latest from 2.10.401.5.
Best Regards
Wrapp
Had similar problems, upgrading to the latest radio helped. I got stuck on the HTC screen and I went through flashing RUU's and unlocking bootloaders back and forth... when the only thing that needs to be done is to wipe the cache.
Learned a lot about bootloaders though. But my warranty got void because i did the htcdev unlock... (Sorry for OT)

Is there a solution for the WiFi issue?

It's been some time since I posted the problem. I searched around and didn't find any new information, so I am just hoping I missed something, like a possible thread that has a fix.
I have no WiFi, have gone through the book trying to fix it, to no avail. HOWEVER, I left the phone un used for about a month, battery had died long ago. A few days ago, I grabbed and and just decided to give it another shot and install revolution hd on it. For whatever reason, it installed successfully and the WiFi was working perfectly. So I updated the 4ext and had notice that a new version of HD had come out, so I decided to update it, and well, back to square 0, WiFi no longer works. So I tried to back pedal and repeated the steps leading up to the WiFi working, Super Wipe with smart flash enable, reboot, installed HD with no smart flash. But this time it did not work. Strange that it worked before though, I wonder if it being out of battery for so long had something to do with it.
did you try to flash the boot.img of your rom?
also if you are S-ON when flashing a rom always enable smartflash
rzr86 said:
did you try to flash the boot.img of your rom?
also if you are S-ON when flashing a rom always enable smartflash
Click to expand...
Click to collapse
What he said.. if you're s-on always flash with smartflash
Sent from my HTC Sensation 4G
I too had the wifi issues for quite some time. After updating my kernel it got fixed.
Probably you could do the following:
1. If your HBOOT is S-ON, make sure you follow the above two posts while flashing ROM
2. Ensure that the latest firmware is being used.
2. Try changing the kernel (mine is faux 009b4 now).
I am S-OFF, like I said, I've tried everything.
Just seem odd that out of nowhere it flashed correctly, I should of just left it at that, maybe if I leave the battery inside the phone drained for a while I can repeat the successful flash.
F9zSlavik said:
I am S-OFF, like I said, I've tried everything.
Just seem odd that out of nowhere it flashed correctly, I should of just left it at that, maybe if I leave the battery inside the phone drained for a while I can repeat the successful flash.
Click to expand...
Click to collapse
well don't know if you have tried this but the last thing I can think of is to go back to stock ruu, if it still doesn't work it might be hardware related
Sent from my HTC Sensation 4G
I faced with same issue. I use ARHD 6.7.1 and i have no problems with wi-fi , but when I try to install sense 4.0 roms for sensation, I always have wi- fi problem.I live in Almaty and I use Beeline for mobile carrier, My device is Revolutionary S-OFF. I live in Almaty and I use Beeline for mobile carrier, and also I have one sim card for Turkey, AVEA, when I use Beeline wi-fi doesn't work but when I use Avea wi-fi works completely. I tried wifix manager. But I can't find solution :/
Same thing happened to me when I updated, go to tools in 4ext before flashing and enable smart flash, I'm pretty sure this will help
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app

[Q] GPS problem

Hi,
I reflash my HTC sensation XE wit riffobx to HBOOT-1.27.1100 ,S-OFF and superCID. After that flash firmware 3.33. In fastboot load newest CWM and reflash phone to Android HD revolution. But there is a problem, I have no GPS signal. I try flash many of radios RILs but stil no success. I try GPS fix, change flex with GPS antenna, put my board to second phone where is GPS normaly functioning (with stocked firmware), but nothing changes. Before that in stocker ROM signal was great. So I try to get back to stocked ROM but still no signal. Any suggestion?
Hi, you unbrick your phone and u Have not install RUU Before Custom ROM....
Perhaps it's the way to put Stock informations in that and it will solve problem:!!!!
I think you make a lot of search about it, if you talk about gps fix and others things before...
Try this after, put our marvelous Firmware 3.33 Universal!!! on your sd card, boot into bootloader and let it's made and it's done ....
Try with Stock ROm your GPS ... then if all works, put your favorite ROM
I try this many times and this time too, but no solution. GPS still not signal. Cant find sattelite but is on. Any other suggestion?

[Q] Radio problem with custom ROM

I'm hoping for some friendly advice - I have a Desire S which was rooted last year and I installed CM10 to try out JB. All has been working well )part from the occasional reboot) however couple of days ago the battery started draining quickly, the phone became very hot and the wifi stopped working. After various wiping of caches and rebooting I decided to try some other ROMs (Fallout Evolution V5, Miui, IceDS) and although they all installed OK I still have no wifi and now the mobile network won't work.
It worked on Fallout at first but when the wifi wasn't working I wiped and re-installed and it hasn't worked since. It does see the O2 network although the phone hd previously been unlocked to work with Vodafone, so I think I may have rolled back the radio somehow.
At this stage I'm not entirely sure if it is a software or hardware problem, and I din't know how to test the hardware.
The phone is currently as follows:
UNLOCKED
Saga PVT ship s-on RL
HBOOT -2.02.0002
Radio -3831.19.00.110
eMMC -BOOT
July 31 2012>15.41.32​
Do I need to update the radio? If so, which version should I use? And do I need to s-off the phone first?
Any other help would be appreciated.
lesmorton said:
I'm hoping for some friendly advice - I have a Desire S which was rooted last year and I installed CM10 to try out JB. All has been working well )part from the occasional reboot) however couple of days ago the battery started draining quickly, the phone became very hot and the wifi stopped working. After various wiping of caches and rebooting I decided to try some other ROMs (Fallout Evolution V5, Miui, IceDS) and although they all installed OK I still have no wifi and now the mobile network won't work.
It worked on Fallout at first but when the wifi wasn't working I wiped and re-installed and it hasn't worked since. It does see the O2 network although the phone hd previously been unlocked to work with Vodafone, so I think I may have rolled back the radio somehow.
At this stage I'm not entirely sure if it is a software or hardware problem, and I din't know how to test the hardware.
The phone is currently as follows:
UNLOCKED
Saga PVT ship s-on RL
HBOOT -2.02.0002
Radio -3831.19.00.110
eMMC -BOOT
July 31 2012>15.41.32​
Do I need to update the radio? If so, which version should I use? And do I need to s-off the phone first?
Any other help would be appreciated.
Click to expand...
Click to collapse
Did You tried installing stock rom again in your mobile
No I haven't. I assume this would re-install the correct radio?
Not sure where to get the stock ROM, or which one was shipped with the phone.
If I did get it can I flash it through recovery - I'm using 4EXT?
lesmorton said:
No I haven't. I assume this would re-install the correct radio?
Not sure where to get the stock ROM, or which one was shipped with the phone.
If I did get it can I flash it through recovery - I'm using 4EXT?
Click to expand...
Click to collapse
Boot into bootloader and run following command
fastboot get cid
Than you can know which ruu to flash. But don't forget to downgrade your misc version before fishing ruu
No ruu are flashed from PC
Sent from my HTC Desire S using xda app-developers app
OK, I have managed to get the phone back to it's stock ROM which is O2 in the UK.
I had previously unlocked the phone but it now won't accept anything other than an O2 SIM. When I scan for networks only O2 is seen. I still have the unlock code but when I put a Vodafone SIM in it doesn't prompt me for the unlock code. I'm just getting a Limited Service display.
Is there any way of forcing the unlock code prompt screen - say with keyboard numbers or via Fastboot?
lesmorton said:
OK, I have managed to get the phone back to it's stock ROM which is O2 in the UK.
I had previously unlocked the phone but it now won't accept anything other than an O2 SIM. When I scan for networks only O2 is seen. I still have the unlock code but when I put a Vodafone SIM in it doesn't prompt me for the unlock code. I'm just getting a Limited Service display.
Is there any way of forcing the unlock code prompt screen - say with keyboard numbers or via Fastboot?
Click to expand...
Click to collapse
do i understand things as they are?
do you intend to use simcards of another operator?,
well... that`s what branding stands for,
to make sure
you`ll not use any sim from different carrier...
is your phone simlocked as well,
or is it only a branded rom ?
..but why bothering to flash the phone with branded RUU,
(when there are quite a few generic ones, still floating around,..)
except, when one wants to claim a warranty..may be...
I flashed the O2 ROM as it was what was on the phone when I bought it and I was trying to get back to a radio that would work.
I have since managed to get the phone working OK with the Asda/Vodafone SIM but I am still having problems with the wifi (this is where it all started!). whenever I switch the wifi on it scans and then reports that it is unable to scan for networks, after 2-3 attempts the wifi switches itself off.
I'm still trying to find out if it is a software or hardware problem. Other than that all is working well on the Fallout v5 ROm I have flashed - although it does make the phone run hot.
lesmorton said:
I flashed the O2 ROM as it was what was on the phone when I bought it and I was trying to get back to a radio that would work.
I have since managed to get the phone working OK with the Asda/Vodafone SIM but I am still having problems with the wifi (this is where it all started!). whenever I switch the wifi on it scans and then reports that it is unable to scan for networks, after 2-3 attempts the wifi switches itself off.
I'm still trying to find out if it is a software or hardware problem. Other than that all is working well on the Fallout v5 ROm I have flashed - although it does make the phone run hot.
Click to expand...
Click to collapse
make backup (CWM)
try to find, and flash another kernel- custom,
..that may be a possible fix, for wifi issues,
as that is very often caused by,
not efficient, or completely missing drivers (0kb file size)....
...depending on the RUU version- flashed,
you might be interested in:
http://forum.xda-developers.com/showthread.php?t=1845039
otherwise, try to look for < unity > or < endymion > kernel.....
..Heat might be caused either
by battery,
or CPU - struggling with heavy flaw of graphics, (like < Google Earth >+< Browser >+<anything one prefers > )
or a nasty app ( or several ), constantly trying to consume, most of its resources...
..both quite simple to eliminate...
..and...undervolting, it helps to reduce heat - too...
asgardr said:
make backup (CWM)
try to find, and flash another kernel- custom,
..that may be a possible fix, for wifi issues,
as that is very often caused by,
not efficient, or completely missing drivers (0kb file size)....
...depending on the RUU version- flashed,
you might be interested in:
http://forum.xda-developers.com/showthread.php?t=1845039
otherwise, try to look for < unity > or < endymion > kernel.....
..Heat might be caused either
by battery,
or CPU - struggling with heavy flaw of graphics, (like < Google Earth >+< Browser >+<anything one prefers > )
or a nasty app ( or several ), constantly trying to consume, most of its resources...
..both quite simple to eliminate...
..and...undervolting, it helps to reduce heat - too...
Click to expand...
Click to collapse
I changed the ROM to IceDS v8 which seems to run cooler. I think part of the problem was with Titanium Backup running and the wifi kept searching for a network.
I am still having the wifi problem as it displays 'unable to scan for networks'. Having searched the internet extensively and tried a few different so called fixes I have come to the conclusion it is a hardware problem. When I get time I'll see if I can strip the phone and see if I can find the cause.
lesmorton said:
I changed the ROM to IceDS v8 which seems to run cooler. I think part of the problem was with Titanium Backup running and the wifi kept searching for a network.
I am still having the wifi problem as it displays 'unable to scan for networks'. Having searched the internet extensively and tried a few different so called fixes I have come to the conclusion it is a hardware problem. When I get time I'll see if I can strip the phone and see if I can find the cause.
Click to expand...
Click to collapse
Well I stripped the phone and checked what connections I could but still no wifi.
I have used the RUU to get back to stock ROM and everything is fine except the wifi not working. Does anyone know if the wifi hardware is on the PCB, and if so where it would be in the phone. As the phone is in excellent condition I am thinking of getting a cheap phone with broken screen and just cannibalising it with my phone and building one good phone. It's just knowing what part of the phone contains the wifi hardware.
Any help would be appreciated.

Firmware/Radio MAJOR Issue

Hi all, kind of a newbie, but I've been rooting phones for a few years and have never had this issue. I wanted to upgrade my ROM to Maximus HD 10 and that was a big mistake because it involved going to SuperCID and S-Off. I was successful with both, but I ended up uninstalling due to not getting 3G/4G. Well, plenty of uninstalling and trying new ROMS and still I am left with 2G only. I have flashed the latest T-Mobile US Radio but it doesn't seem to do anything. I'm thinking it is a firmware issue, so I was wondering if there is a firmware I need to flash and do I need to fastboot flash it or recovery flash it? I am tempted to call T-Mobile and just order a new phone in the first place, but I would really like to have 3G/4G back. What firmware do I need and also does installing a new RUU overwrite the CID, firmware, and radio? I would love to back to the T-Mobile CID and the stock rom. Please help, thanks!!!
Keep soff and flash tmob ruu. All ruu contains firmware.zip, so if you flash tmob ruu you will downgrade your hboot and radio. Also make sure you'll wipe sd card from bootloader after ruu.
Sent from my HTC One S
hitzradio said:
Hi all, kind of a newbie, but I've been rooting phones for a few years and have never had this issue. I wanted to upgrade my ROM to Maximus HD 10 and that was a big mistake because it involved going to SuperCID and S-Off. I was successful with both, but I ended up uninstalling due to not getting 3G/4G. Well, plenty of uninstalling and trying new ROMS and still I am left with 2G only. I have flashed the latest T-Mobile US Radio but it doesn't seem to do anything. I'm thinking it is a firmware issue, so I was wondering if there is a firmware I need to flash and do I need to fastboot flash it or recovery flash it? I am tempted to call T-Mobile and just order a new phone in the first place, but I would really like to have 3G/4G back. What firmware do I need and also does installing a new RUU overwrite the CID, firmware, and radio? I would love to back to the T-Mobile CID and the stock rom. Please help, thanks!!!
Click to expand...
Click to collapse
should have searched and read some threads before uninstalling maximusHD. Tons of folks, myself included, had 3G/4G issues after installing MaximusHD. All fixed now.
rgrpark said:
should have searched and read some threads before uninstalling maximusHD. Tons of folks, myself included, had 3G/4G issues after installing MaximusHD. All fixed now.
Click to expand...
Click to collapse
I have drop signal issues, 3g and 4g seems normal but lose complete signal constantly.
i had home button issue when signal drops from 3g to 2g. home button activates itself sometimes when browsing internet and often drop action to homescreen. that must be radio related. and sometimes stock browser loose connection while chrome works. got tired of these things and everything all working perfectly when going back to Viper roms. any ideas ?
Sent from my HTC One S using Tapatalk 4

Categories

Resources