Database Info

replacing framework-res.apk?

(basically im tryna put villians themed framework-res into sanpeis latest rom)
ok i found this ROM with a modded taskbar thing... the battery icon, 3g icon, etc were different.
i took the framework-res.apk from that rom and replaced it with the one already in my phone but now my phone wont pass the second flashscreen even if i leave it for half an hour.
wtf i checked the permissions of the new framework-res and made it to match the rest of the files in the system/framework folder but nothing changed
is it just not compatible?

if you change it it has to be from same style rom, if it's a legend rom you need one from legend rom, you cannot mix that easy hero and legend framework files

If the only thing you wish to change is those icons, then take both apk files apart with some compression tool(I know 7zip works), find the files that you wanna take from villains that are in res folder and copy them to res folder from sanpeis rom(ofc you need to put them in right folders, but when you open up res folder you'll know what to do. After you replaced those files, take all the files that were from start in sanpeis framework and the edited res folder and create a .zip file. Rename the file to framework-res.apk(no, the name shouldn't be xxxx.apk.zip, but you need to change the extension from zip to apk) and push it like you would normally do. Also you should probably want to know that the more compression, the more likely that the apk will fail So your best bet is to go with store. Good luck
Sent from my HTCMagic using the XDA mobile application powered by Tapatalk

You will have to sign your framework-res.apk using testsign.jar if you have made any changes to it.

Why would he need to do that if he's just going to push it?

klothius said:
Why would he need to do that if he's just going to push it?
Click to expand...
Click to collapse
yea i just want to push it from one legend-based rom to another.. it doesnt work but im going to try to tear them open and see what i can do from there..
Thanks
EDIT: NICEEE i got it working.. and i just replaced a few things from one framework-res to the other.. thanks again, i didnt know it could be opened with 7-zip hahah

No prob, glad to see it's working for ya. Enjoy it

png
i edited 166 icons in framework-res.apk
adb pushed it, worked flawlessly.
even on XDAndroid on htc diamond 2

st0kes said:
You will have to sign your framework-res.apk using testsign.jar if you have made any changes to it.
Click to expand...
Click to collapse
Incorrect. /system/app/*.apk's donot require to be re-signed upong modifying them because the core doesnt no check its certs/hash for consistency. So just pull/modify/push. Use apk manager in my signature if ur new to this

Theming files?

Sorry about the first post. I was wondering where the png files are located in the rom so I can start theming
Sent from my HERO200 using XDA App

If this has been addressed sorry. I searched but didn't find it. If it's been addressed please point me in the right direction. Thanks
Sent from my HERO200 using XDA App

abadasstanker69 said:
If this has been addressed sorry. I searched but didn't find it. If it's been addressed please point me in the right direction. Thanks
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Ull find all the PNG in the individual apps in the system/app, system/framework, and data/app.

Papa Smurf151 said:
Ull find all the PNG in the individual apps in the system/app, system/framework, and data/app.
Click to expand...
Click to collapse
Thanks bro! All I see is apk files though. Where are the images?? Also, is there anything specific I have to do in order to export/import the files in Photoshop? I read something somewhere about a .9 PNG or something like that....what does this mean? BTW great work on your theme! It looks awesome! I love it!

Ok I'm a douche bad. lol I renamed the apk to .zip and extracted with winrar. Now I'm in to where I want to be! I'm looking for the little android guy when you make a phone call but, I can't seem to find him in the HTCdialer.apk. Am I looking in the wrong place? Thanks again for the help!

They are in the apk's.
http://developer.android.com/index.html
Good luck.

Ok found the little droid man! This is gonna be awesome!! Any more useful places I should mess around in? This is gonna be FUN!!!!!!!

Ok so I have edited some files and rezipped them. Now do I flash the updated files through recovery or do I have to rename it to .apk and stick it in the rom and re-flash?

abadasstanker69 said:
Ok so I have edited some files and rezipped them. Now do I flash the updated files through recovery or do I have to rename it to .apk and stick it in the rom and re-flash?
Click to expand...
Click to collapse
I may be wrong but I have done the same thing, all I did when I was finished was push them via adb to their respective places and then reboot and it worked fine for me. Nandroid before you push so if it boot loops you can recover. Then the easiest thing at that point would be to save your work in the ROM you modded, push to sd root, wipe and flash it. I am creating a themed version of Darchoid 2.7 but taking my sweet time as I dont have a lot of it to begin with.

For my HTC Keyboard modifications, I just dropped my new images into the APK that was open in 7zip and pushed it to the /system/app/ dir and launched the keyboard, and BAM, my new keyboard.

abadasstanker69 said:
Ok so I have edited some files and rezipped them. Now do I flash the updated files through recovery or do I have to rename it to .apk and stick it in the rom and re-flash?
Click to expand...
Click to collapse
You have to sign it too. If you want to flash it. If you wanna just push it through adb then then put your edited .apk in AndroidSDK\tools and push it.
Go to command prompt:
Code:
cd C:\android-sdk-windows\tools
adb remount
adb push xxxxx.apk /system/app/
exit
C:\android-sdk-windows\tools is assuming thats where your sdk\tools folder is
xxxxx.apk is the name of the .apk
/system/app/ is assuming that's where you got the .apk from

Thanks for all the help guys. I appreciate it but, I was attempting to make an update.zip so people could then flash them once I complete them. I like to make things idiot proof
So I did some looking and found an autosigner. Problem is, now it wants boot scripts? WTF? I know I could push them through adb and simply tell others to do the same. I was just wondering if there was an easy way of doing this? I'm currently using avabox. Thanks again guys!!

abadasstanker69 said:
Thanks for all the help guys. I appreciate it but, I was attempting to make an update.zip so people could then flash them once I complete them. I like to make things idiot proof
So I did some looking and found an autosigner. Problem is, now it wants boot scripts? WTF? I know I could push them through adb and simply tell others to do the same. I was just wondering if there was an easy way of doing this? I'm currently using avabox. Thanks again guys!!
Click to expand...
Click to collapse
Just use a mod or update.zip any will do and add ur files and delete the originals in the zip. Keep the meta file and such. Then u can autosign with avabox. It gets tricky with scripts when making a rom. The update.zip script is very basic

Check This Out
You can just take one from a working zip if you want
Otherwise you will be making a file (i use notepad++) called "update-script" *notice-there is no file extension like .txt or anything*
In general they ususally just have:
Code:
show_progress 0.1 0
copy_dir PACKAGE:system SYSTEM:
show_progress 0.1 10
(but may be different depending on where you want the zip's contents to be put in)
Which will be placed into a folder directory META-INF/com/google/android/update-script
You can also add things such as:
Code:
delete SYSTEM:app/contacts.apk
*or whatever you want deleted*
After you make the update-script, just sign it and flash
See my attachment for a template

[/QUOTE]You can also add things such as:
Code:
delete SYSTEM:app/contacts.apk
*or whatever you want deleted*
After you make the update-script, just sign it and flash
See my attachment for a template[/QUOTE]
What would be the purpose in doing that? Would it actually delete people's contacts if they flashed my theme? That's kinda cool but, I'm not trying to be a **** like that! lol
Also, are you guys referring to an update.zip that's all ready out as in a theme file? Or as in a rom? I understand I can use the work that's all ready there and I actually tried that. I zipped the file back up.Then signed with avabox. Renamed it to .apk. Stuck it back in the rom. Attempted to flash and got the boot script error

abadasstanker69 said:
What would be the purpose in doing that? Would it actually delete people's contacts if they flashed my theme? That's kinda cool but, I'm not trying to be a **** like that! lol
Also, are you guys referring to an update.zip that's all ready out as in a theme file? Or as in a rom? I understand I can use the work that's all ready there and I actually tried that. I zipped the file back up.Then signed with avabox. Renamed it to .apk. Stuck it back in the rom. Attempted to flash and got the boot script error
Click to expand...
Click to collapse
haha i just used contacts.apk as an example, it could be anything you wanted really. But its generally only used for when making an update.zip for boot screens.
And yes, you could take an already existing zip... but i was a little confused as to what you were doing sorry.
Correct me if I'm misunderstanding you again lol, but you're editing images within .apks and want to make a flashable-update.zip once you finish?
Easiest way, as stated before would be to use 7-zip.
Open the .apk Directly with 7-zip (no renaming the .apk to .zip or anything) and drag the replacement images into the .apk - overwriting the older images
Test it by pushing the apk to your phone, if it works without any problems great
If it doesn't then use something like Apk Manager to extract the apk/edit the files/and zip them back up < generally what I do
Put the .apk into the apps folder in my "template update.zip" file
Delete the framework folder and readme.txt file
Sign the .zip
Flash

kyouko said:
haha i just used contacts.apk as an example, it could be anything you wanted really. But its generally only used for when making an update.zip for boot screens.
And yes, you could take an already existing zip... but i was a little confused as to what you were doing sorry.
Correct me if I'm misunderstanding you again lol, but you're editing images within .apks and want to make a flashable-update.zip once you finish?
Easiest way, as stated before would be to use 7-zip.
Open the .apk Directly with 7-zip (no renaming the .apk to .zip or anything) and drag the replacement images into the .apk - overwriting the older images
Test it by pushing the apk to your phone, if it works without any problems great
If it doesn't then use something like Apk Manager to extract the apk/edit the files/and zip them back up < generally what I do
Put the .apk into the apps folder in my "template update.zip" file
Delete the framework folder and readme.txt file
Sign the .zip
Flash
Click to expand...
Click to collapse
LOL I really appreciate the help! You guys kick ass!!!! BUT I tried this method MINUS the renaming part and it didn't work. Sooooo....I'm assuming the renaming caused the issue.
Also, I was using winrar. I read somewhere that 7zip should be used instead of winrar but I just don't think this should matter considering the compression method is no different. Am I wrong? Also, will my theme have to vary from rom to rom? If I create this theme for people will I have to specify what rom I'm on?
Thanks again SOOOOOOOOOO much for the help guys...I know working with noobs can be a headache. I did it in the WinMo world for YEARS till I came to the "Dark Side"

abadasstanker69 said:
LOL I really appreciate the help! You guys kick ass!!!! BUT I tried this method MINUS the renaming part and it didn't work. Sooooo....I'm assuming the renaming caused the issue.
Also, I was using winrar. I read somewhere that 7zip should be used instead of winrar but I just don't think this should matter considering the compression method is no different. Am I wrong? Also, will my theme have to vary from rom to rom? If I create this theme for people will I have to specify what rom I'm on?
Thanks again SOOOOOOOOOO much for the help guys...I know working with noobs can be a headache. I did it in the WinMo world for YEARS till I came to the "Dark Side"
Click to expand...
Click to collapse
Yes 7zip works better for theming and roming. I tried winrar and it was a pain in the ass.
Yes u will have to specify which roms it will work on. Files on darchdroid r different than our 2.1 roms and so forth. So they wont work right.
Download avabox and use the signing tool in there to sign ur zips.
Make sure in ur zip if ur editing an app it's in the right place...ie system/app or system/framework or data/app. Then make sure ur Meta file is in there. After that sign it and then u can change the name and flash it

Papa Smurf151 said:
Yes 7zip works better for theming and roming. I tried winrar and it was a pain in the ass.
Yes u will have to specify which roms it will work on. Files on darchdroid r different than our 2.1 roms and so forth. So they wont work right.
Download avabox and use the signing tool in there to sign ur zips.
Make sure in ur zip if ur editing an app it's in the right place...ie system/app or system/framework or data/app. Then make sure ur Meta file is in there. After that sign it and then u can change the name and flash it
Click to expand...
Click to collapse
I'm such a freaking noob....what's the meta file for? This seems like alot to do for a theme :/

abadasstanker69 said:
I'm such a freaking noob....what's the meta file for? This seems like alot to do for a theme :/
Click to expand...
Click to collapse
The Meta file is for the update script. It has other uses but for ur purpose its for the update script which is the instructions the recovery uses to flash the theme. Like I stated before just use an existing one from a different theme or mod. Creating ur own is possible but not needed. Hit me up on gtalk if u want to ask me questions.
[email protected]
I don't mind teaching if anyone wants to learn

[How To] Basic Themeing

This is a very basic guide to beginning themeing. It is not meant to be all-inclusive, just some simple steps that can be taken to make your own custom theme fairly easily. This guide should allow anyone to be able to grab images they like from any ROM and incorporate them into their own.
I SUGGEST YOU ALWAYS MAKE A BACKUP OF ANY FILE BEFORE YOU THEME IT AND NANDROID FIRST BEFORE FLASHING
Here is a basic overview of changing images in an apk:
1. Get your base file to theme – framework-res.apk, com.htc.resources.apk, phone.apk ect.
2. “Open” apk archive with 7-zip (don’t unzip!) and drag and drop the new images into the appropriate folder.
3. Flash new file.
Now some details:
1. The first step is to obtain the file you are going to theme. The file you are themeing ( i.e. going to flash to your phone) must come from the ROM you are currently running. Always use files from your current ROM as a base, however the images you want to change can come from other ROMs, or you can edit existing ones or make your own from scratch. You can obtain your theme base through an ADB pull of the files from your phone, or simply downloading the ROM zip file and extracting the files you need.
2. Now that you have the file to theme, don’t touch it! OK, more specifically, you won’t unzip or do anything to this file except “open” it with 7-zip (unless this is a market app, but more on that later). You are going to drag and drop the new icons into this file by “opening” it and navigating to the appropriate folder. The images you want to change are stored in the apk under /res/drawable-hdpi. Once you have your new icons from other sources, open your base file and navigate to this folder and drop them in.
3. Now you can flash this new file. I have provided empty zip files that you can place your themed files into and flash in recovery. Place your framework-res.apk and/or com.htc.resources.apk into the /system/framework folder located in the zip file provided. Now highlight the META-INF and system folders and zip them up. You can now place this file on the root of your SD card and flash. System apps can be placed under /system/app in the zip file.
Some more info on common themeable files:
Framework-res.apk – this is the meat and potatoes of a theme. On an AOSP ROM it will contain almost everything you want to theme aside from individual apps themselves. Sense ROMs have another file com.htc.resources.apk, as well as framework-res.apk. Both of these files are located in a ROM under /system/framework.
System apps: These apps come packaged in a ROM under /system/apps. They can be themed in the same manner as a framework apk. Some of these apps include Gmail, browser, camera, ect. Place them in your flashable zip under the folder /system/app.
Market apps: These apps are downloaded from the market and are can be pulled from your phone from /data/app. These files require a bit more to theme. They don’t share the same signature as the system apps and you must resign them using a program such as apkmanger. Place them in your flashable zip under /data/app.
If there are any errors, or if anyone has suggestions please let me know. I may have over looked some details, ect.
Thanks to everyone on XDA who has shared their knowledge and made this a great community!

Thanks that will be helpful
Sent from my PC36100 using XDA App

so using this guide we can pull parts and what not from other elements of themes we like and create our own framework to push back? Also, based on what you have, shouldn't it be easy to put this up on bid for hire (?) website to create a program to automate that?

xlGmanlx said:
so using this guide we can pull parts and what not from other elements of themes we like and create our own framework to push back? Also, based on what you have, shouldn't it be easy to put this up on bid for hire (?) website to create a program to automate that?
Click to expand...
Click to collapse
Yes the idea of this guide was to help people pick and choose icons they like in other ROMs and add it to their own. I'm not sure what bid for hire is?

its a website where you can load your requirements and folks can bid to do your work
linky
nukedukem said:
Yes the idea of this guide was to help people pick and choose icons they like in other ROMs and add it to their own. I'm not sure what bid for hire is?
Click to expand...
Click to collapse

xlGmanlx said:
its a website where you can load your requirements and folks can bid to do your work
linky
Click to expand...
Click to collapse
Interesting. Didn't know anything like this existed.
Sent from my EVO (CM6.1) using XDA App

Thank you, thank you!!!! I've been looking for something like this for a while.

evolishesh said:
Thank you, thank you!!!! I've been looking for something like this for a while.
Click to expand...
Click to collapse
No prob. Let me know if it works for you.

I couldn't get the auto signing to work, but the manual way of doing it worked.

Hmm, I got a boot loop on first try and doing this. Does that mean something went wrong with the signing, or that what I created for the theme was wrong? I used the empty .zip folder and re-zipped it, so I don't think that is the issue.

JasonK75 said:
Hmm, I got a boot loop on first try and doing this. Does that mean something went wrong with the signing, or that what I created for the theme was wrong? I used the empty .zip folder and re-zipped it, so I don't think that is the issue.
Click to expand...
Click to collapse
The signing should be ok. If you are using Amon_ra recovery it wont let you flash an unsigned zip I believe. Are you on sense or AOSP? Are you editing images or just copying from other ROMs?
What you might want to do is just create a simple test file. Change just one image and then flash that. That should let you know that your process is correct.

I using Amon Ra and using AOSP. I was moving some items out of a sense ROM so I guess that is where I might have went wrong. I think I'll take your advice and move just a single image and see how that works for me. Thanks!

I tried again this time I ended up stuck at the EVO white screen. I'm guessing it doesn't like the sense part I'm trying to throw in there. I'll have to try again with a AOSP theme instead.
Sent from my EVO (CM6.1.1) using XDA App

A couple things to look out for when swapping sense/CM icons - some file names are slightly different between sense and AOSP. Rename any sense icons to their AOSP counterparts and vice versa. Also, double check the image size of the icon is the same in both, i.e. 70x70 pixels, ect. and make sure you are not adding images that don't exist normally in the framework. For example there wont be any 4G icons in CM framework.
Also, make sure you aren't unzipping the new framework-res.apk you want to theme and flash, or trying to resign it. Only sign the flashable zip, not the individual files inside. The only thing you want to do with the framework-res.apk you will package and flash is open (not unzip) with 7-zip and navigate to the res/drawable-hdpi folder so you can drag and drop the new icons into it, overwriting the old.
I hope that helps!

How important is it to re-sign? I have modified the Framework and Resources apks with 7zip by switching images out. I have also modified the Rosie.apk. I put everything back where it was supposed to go, backed out of 7-zip and flashed. I have never had an issue with it, nor have I re-signed it. Just wondering.

spence341 said:
How important is it to re-sign? I have modified the Framework and Resources apks with 7zip by switching images out. I have also modified the Rosie.apk. I put everything back where it was supposed to go, backed out of 7-zip and flashed. I have never had an issue with it, nor have I re-signed it. Just wondering.
Click to expand...
Click to collapse
AFAIK if you are on clockwork recovery, I don't think it checks for signatures. I think Amon_ra requires a signed file to flash. I think it's just added protection against flashing any old junk. If you can flash in amon_ra without a signature and you don't have problems then I wouldn't worry about it. It's the signature of the framework-res.apk ( or com.htc.resources.apk) that's important. That's why you don't unzip it.

I think that
1.7.0.2 = yes
1.8 = no
nukedukem said:
AFAIK if you are on clockwork recovery, I don't think it checks for signatures. I think Amon_ra requires a signed file to flash. I think it's just added protection against flashing any old junk. If you can flash in amon_ra without a signature and you don't have problems then I wouldn't worry about it. It's the signature of the framework-res.apk ( or com.htc.resources.apk) that's important. That's why you don't unzip it.
Click to expand...
Click to collapse

nukedukem said:
A couple things to look out for when swapping sense/CM icons - some file names are slightly different between sense and AOSP. Rename any sense icons to their AOSP counterparts and vice versa. Also, double check the image size of the icon is the same in both, i.e. 70x70 pixels, ect. and make sure you are not adding images that don't exist normally in the framework. For example there wont be any 4G icons in CM framework.
Also, make sure you aren't unzipping the new framework-res.apk you want to theme and flash, or trying to resign it. Only sign the flashable zip, not the individual files inside. The only thing you want to do with the framework-res.apk you will package and flash is open (not unzip) with 7-zip and navigate to the res/drawable-hdpi folder so you can drag and drop the new icons into it, overwriting the old.
I hope that helps!
Click to expand...
Click to collapse
Thanks, any advice does help.
I did make sure the the icons I was swapping out were named the same thing in the CM ROM, but I didn't check the size of it at all.
I didn't unzip the famework-res.apk but instead just went into it with 7-Zip and dragged the icons into that. Then I backed out of 7-Zip so that it would save and close everything properly - know that does work because that is how I add the Fold transistions to the ROM - and then I put the famework-res.apk into the folder and zip it up per your instructions above. Then I manually sign it (still haven't been able to get the auto-signing to work) and then flash.
I'll have to try again moving a CM theme to the CM framework-res.apk and see if it is working. What I was attempting to do was take, from the Batman Theme for sense, the drop down notification shade with the Bat Icon and put it into the CM ROM. I don't know if you have time to try it yourself to see if it works, or if you get the same issues that I had.
Either way, thanks for the help! I know I'll get this theming down at some point!

nukedukem said:
No prob. Let me know if it works for you.
Click to expand...
Click to collapse
Hey buddy.
I’m stuck. I had to download and install Eclipse with the sdk plus java. I don’t know where to go from there. Every time I open the rom that I want to theme and get the framework.apk and edit the PNG’s , how do I go about saving them? Do I just used the same name as the old ones or I have to save them with a new name.
Or pm Me.

xlGmanlx said:
I think that
1.7.0.2 = yes
1.8 = no
Click to expand...
Click to collapse
So the new amon_ra doesn't require a signed file to flash? I'll make a note off that. Thanks.
JasonK75 said:
Thanks, any advice does help.
I did make sure the the icons I was swapping out were named the same thing in the CM ROM, but I didn't check the size of it at all.
I didn't unzip the famework-res.apk but instead just went into it with 7-Zip and dragged the icons into that. Then I backed out of 7-Zip so that it would save and close everything properly - know that does work because that is how I add the Fold transistions to the ROM - and then I put the famework-res.apk into the folder and zip it up per your instructions above. Then I manually sign it (still haven't been able to get the auto-signing to work) and then flash.
I'll have to try again moving a CM theme to the CM framework-res.apk and see if it is working. What I was attempting to do was take, from the Batman Theme for sense, the drop down notification shade with the Bat Icon and put it into the CM ROM. I don't know if you have time to try it yourself to see if it works, or if you get the same issues that I had.
Either way, thanks for the help! I know I'll get this theming down at some point!
Click to expand...
Click to collapse
OK I'll try and do what you are trying to do and see if it works...
evolishesh said:
Hey buddy.
I’m stuck. I had to download and install Eclipse with the sdk plus java. I don’t know where to go from there. Every time I open the rom that I want to theme and get the framework.apk and edit the PNG’s , how do I go about saving them? Do I just used the same name as the old ones or I have to save them with a new name.
Or pm Me.
Click to expand...
Click to collapse
So now you have an unzipped framewor-res.apk with a bunch of images. This framework should be the one that you want to take icons from. If not, start over with the ROM you want to copy images from. You will want to copy the images you want to put into another ROM so that you can dump them into the new framework-res.apk. After you figure out what icons you want to bring to your new framework, get a clean version of framework/com.htc from the ROM you are actually running - i.e. if you are running myn ROM on your phone, download the myn ROM and pull out the framework-res.apk or com.resources.apk that you are going to theme.
Now with this fresh clean framework you will "open" it with 7-zip to navigate to the /res/drawable-hdpi folder so you can now drag and drop the images you want to copy over into it. Then the close the 7zip window and your framework-res.apk is all set to flash. You don't need to rename if the file names are the same, you can just drag and drop and the files will be overwritten in the new framework.

[Q] I want to make a theme...

But I don't exactly know how to get there.
I'm runing Wolfbreak's CM ROM V055, afraid to go to V06 because it might break my kernel install(still getting info on just what to do)
What I'm wanting is:
The status/pulldown bars(all icons except Wifi, and I want to keep Cyanogen 6's default slidey bar[the thing that ends up at the bottom]), and the animations from the theme used in SEMPITERNAL's Eternity 2 Build 0003a ROM. That will have to be ported to FroYo, I'm afraid(unless my theory at the bottom of this post will work).
I want the menu from LUCID-X10 by SicNside, with the black BG and white elements, but the png forthat i guess I'll have to negative a white hdpi one.
That's about it, the rest i want from arc theme which is default on my current ROM, including tickboxes, those arrows inside circles, the menu icons, etc.
My theory to sort of make this is to get the two involved APK's(default in CM and default in Eternity) onto my computer, and make them ZIP's. Then i can extract the drawable-hdpi folders from each and paste what I want from Eternity into Arc. Then I can replace the drawable-hdpi folder in the Arc framework file, and zip it at store.
That's where I stop knowing what I'm doing. Searching has not found me a guide on just how to make a framework-res.apk, nor even really making a theme altogether. All i can find is about xml files, resources, never anything about actually making the apk correctly.
Help, please?

I am stuck at the same point as you, I have no idea where to go from here :S

Anyone? I'm sure the two of us aren't the only ones...

Here's a zip of what I want. All I did was:
Took the framework-res.apk from the ETERNITY Rom and from the CM ROM, and pasted the png's i wanted from Eternity into drawable-hdpi-v4 in CM framework. Now, can someone make this work, please?

Its quite easy.
Just select the images you want to change.
Then open the framework-res.apk of your ROM with winrar or 7zip your choice.
Without extracting the files drag and drop the files to the winrar window in the right place. If you want to change images in drawable-hdpi migrate to res/drawable-hdpi and drag and drop images there.
Now close the archive and type this:
Code:
adb push <path to modified framework> /sdcard/framework-res.apk
adb shell mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
adb shell dd if=/sdcard/framework-res.apk of=/system/framework/framework-res.apk
Make sure you take a backup with xrecovery before doing this. If you do something wrong you may end up in a bootloop. In that case just restore from backup and try again!

realunited123 said:
Its quite easy.
Just select the images you want to change.
Then open the framework-res.apk of your ROM with winrar or 7zip your choice.
Without extracting the files drag and drop the files to the winrar window in the right place. If you want to change images in drawable-hdpi migrate to res/drawable-hdpi and drag and drop images there.
Now close the archive and type this:
Code:
adb push <path to modified framework> /sdcard/framework-res.apk
adb shell mount -o remount,rw -t yaffs2 /dev/block/mtdblock2 /system
adb shell dd if=/sdcard/framework-res.apk of=/system/framework/framework-res.apk
Make sure you take a backup with xrecovery before doing this. If you do something wrong you may end up in a bootloop. In that case just restore from backup and try again!
Click to expand...
Click to collapse
Grr, sorry but right now all my failure is just making that less clear. Type that where? Drag the files to the winrar/7zip window? Isn't that where i dont want them?
Ive followed all the different sets of instructions including yours on this forum as closely as i can make sense of them and always end up with a stream of FC's and reboot loops.
EDIT: does it only work on the stock kernel? I'm running Trip's kernel. I just pulled the framework apk then pushed that same apk back and it's still doing it.
EDIT 2: ok no stock kernel and its still doing it WHY THE HELL IS IT DOING THIS?!?!? I FLASHED THE SAME DAMN STOCK FRAMEWORK!

ok if i got the modded framework apk to my sdcard and used root explorer to paste it in, should that work? This laptop might be what's causing it

I have posted few tips here n there when ever people ask about it.
Check this for overall requirements
For your requirement, skip the optimization part out and just do image swap.
Like realunited123 said, dont extract, just open from 7zip, I use Win RAR and drag and drop the new image to the correct folder.
You need to remember few things here, check images name matches against old to new. Other important thing is resolution. you might get in to trouble if you take mpdi and put it to hdpi.
after updating the framwork I made a small template for you guys to play with.
Download attaches zip file open and go to
Framewrok-SJ.zip\system\framework folder and drag and drop the modified framework-res.apk
Dont try to install the attached file. its only a template for you guys to start working on....
After drag and drop you will see zip file size increased.
Simply copy to SD card and install via Xrecovery
You can try any framework to install like this without adb stuff
Remember to make a backup... because you will definitely screwup... we all have...... LOL
Realorasz said:
ok if i got the modded framework apk to my sdcard and used root explorer to paste it in, should that work? This laptop might be what's causing it
Click to expand...
Click to collapse
Well my friend if you have already did this. it will be your first screwup
Dont use root explorer or titanium for this work. Read this post I mention yesterday.......

Shiwantha said:
I have posted few tips here n there when ever people ask about it.
Check this for overall requirements
For your requirement, skip the optimization part out and just do image swap.
Like realunited123 said, dont extract, just open from 7zip, I use Win RAR and drag and drop the new image to the correct folder.
You need to remember few things here, check images name matches against old to new. Other impotent thing is resolution. you might get in to trouble if you take mpdi and put it to hdpi.
after updating the framwork I made a small template for you guys to play with.
Download attaches zip file open and go to
Framewrok-SJ.zip\system\framework folder and drag and drop the modified framework-res.apk
Dont try to install the attached file. its only a template for you guys to start working on....
After drag and drop you will see zip file size increased.
Simply copy to SD card and install via Xrecovery
You can try any framework to install like this without adb stuff
Remember to make a backup... because you will definitely screwup... we all have...... LOL
Well my friend if you have already did this. it will be your first screwup
Dont use root explorer or titanium for this work. Read this post I mention yesterday.......
Click to expand...
Click to collapse
Well i did try swapping mine with the framework apk in the froshed zip. I'll try it with yours though.

Shiwantha said:
I have posted few tips here n there when ever people ask about it.
Check this for overall requirements
For your requirement, skip the optimization part out and just do image swap.
Like realunited123 said, dont extract, just open from 7zip, I use Win RAR and drag and drop the new image to the correct folder.
You need to remember few things here, check images name matches against old to new. Other impotent thing is resolution. you might get in to trouble if you take mpdi and put it to hdpi.
after updating the framwork I made a small template for you guys to play with.
Download attaches zip file open and go to
Framewrok-SJ.zip\system\framework folder and drag and drop the modified framework-res.apk
Dont try to install the attached file. its only a template for you guys to start working on....
After drag and drop you will see zip file size increased.
Simply copy to SD card and install via Xrecovery
You can try any framework to install like this without adb stuff
Remember to make a backup... because you will definitely screwup... we all have...... LOL
Well my friend if you have already did this. it will be your first screwup
Dont use root explorer or titanium for this work. Read this post I mention yesterday.......
Click to expand...
Click to collapse
Is it just me is are you a savior!! Thanks, it's working now!!!!
Hey, by the way, can you teach me how i can make an xrec zip of a dialer mod I made? I want to post it on the CM 6 thread so people can like actualy install it but the only way i currently have for that is adb(which works on apps, but not themes...)
And one more thing, Is any sort of file transfer possible with ADB, or will i have to stick with WiFi File Explorer?

Realorasz said:
Is it just me is are you a savior!! Thanks, it's working now!!!!
Hey, by the way, can you teach me how i can make an xrec zip of a dialer mod I made? I want to post it on the CM 6 thread so people can like actualy install it but the only way i currently have for that is adb(which works on apps, but not themes...)
And one more thing, Is any sort of file transfer possible with ADB, or will i have to stick with WiFi File Explorer?
Click to expand...
Click to collapse
Thats good news.. one less problem to deal with....
create a folder call app on your pc and drag it to system folder in the zip file.
So you should have framework and app folders inside of it.
then copy Phone.apk & Contacts.apk and try to install via xrecovery.
there is a chance you might not be able to install as my initial signing of Zip file dosent included app folder and so MANIFEST.MF & CERT.SF dont have reference. on the other hand during installation Xrecovery dont check
key signature.
I didnt test this way so try, no harm will come to your phone.
Dont know about wifi explorer much. Im testing with adb generally. only final version im publishing in xrec.

Can you teach me how to make that meta inf stuff?
Sent from my X10a using XDA Premium App

Realorasz said:
Can you teach me how to make that meta inf stuff?
Sent from my X10a using XDA Premium App
Click to expand...
Click to collapse
You cannot, after putting stuff, need to sign by app sign tool or there are alternative called APK manager... search its on XDA i think........

I'm not getting it. The update script ange all that forxrecovery...?
Sent from my X10a using XDA Premium App

Realorasz said:
Can you teach me how to make that meta inf stuff?
Sent from my X10a using XDA Premium App
Click to expand...
Click to collapse
In META-INF create \com\google\android folders for update-script file.
Make update-script a text file containing the following
Code:
show_progress 0.1 0
copy_dir PACKAGE:system SYSTEM:
show_progress 0.1 10
Be sure to add an extra blank line after "show_progress 0.1 10"
Compress META-INF and system folders to a zip, then move to your sd and sign with signAPKtic which is a free app in the market. Use "test keys" to sign. (signAPKtic is easiest to me,or you can use 1 of the methods Shiwantha suggested to sign)
I would also suggest zipaligning your apks before adding them to optimize your phone's performance when accessing them. Search zipalign on XDA and you'll find what you need...
*Edit- Also, X10 Mod Tool is great for pushing/pulling apks via adb without all the typing. I use it a LOT when testing different pieces of themes.

AyDee said:
In META-INF create \com\google\android folders for update-script file.
Make update-script a text file containing the following
Code:
show_progress 0.1 0
copy_dir PACKAGE:system SYSTEM:
show_progress 0.1 10
Be sure to add an extra blank line after "show_progress 0.1 10"
Compress META-INF and system folders to a zip, then move to your sd and sign with signAPKtic which is a free app in the market. Use "test keys" to sign. (signAPKtic is easiest to me,or you can use 1 of the methods Shiwantha suggested to sign)
I would also suggest zipaligning your apks before adding them to optimize your phone's performance when accessing them. Search zipalign on XDA and you'll find what you need...
*Edit- Also, X10 Mod Tool is great for pushing/pulling apks via adb without all the typing. I use it a LOT when testing different pieces of themes.
Click to expand...
Click to collapse
I think adb mask controller can do it in the zipalign tab> zipalign /system/app button.
And what format does the text file need to be in?

Signapktic is either telling me the zip doesnt exist or gives me an unzp error... and I supposed to me signing the apk's or the zip?
EDIT: I think I got it. Zip signer instead of signapktic. Let's see what my phone does.
Ok it looks like it worked.

Make sure there are no spaces in the zip's name. Looks like you got it!
Sent from my X10a using XDA App

AyDee said:
Make sure there are no spaces in the zip's name. Looks like you got it!
Sent from my X10a using XDA App
Click to expand...
Click to collapse
So does that mean it worked for you?
EDIT: Oh, I'm stupid, I didn't even post it. Can you test it please?

It looks like it's signed already. Are you asking me to test the app or signature?
Sent from my X10a using XDA App

[Request] Transparent Pulldown Notification Bar

Ive been trying to change my pulldown menu to transparent without any luck! ive tried replacing the status_bar_background.png with one i made via Ninjamorph, and no luck.....i tried unzipping the "systemui.apk" and putting the png file in the drawable-hdpi folder and then zipping the systemui and renaming it to apk, and then replacing the current systemui.apk with the one i did using "RootExplorer", rebooted the phone, fixed permissions,rebooted again and still no change.....im using Eaglesblood 2.3.5 Rom! Please help!

Simer03 said:
Ive been trying to change my pulldown menu to transparent without any luck! ive tried replacing the status_bar_background.png with one i made via Ninjamorph, and no luck.....i tried unzipping the "systemui.apk" and putting the png file in the drawable-hdpi folder and then zipping the systemui and renaming it to apk, and then replacing the current systemui.apk with the one i did using "RootExplorer", rebooted the phone, fixed permissions,rebooted again and still no change.....im using Eaglesblood 2.3.5 Rom! Please help!
Click to expand...
Click to collapse
Use the UOT Kicthen. Much easier method of getting that notification bar modded as u lease.

zimphishmonger said:
Use the UOT Kicthen. Much easier method of getting that notification bar modded as u lease.
Click to expand...
Click to collapse
im a hardcore noob....what is UOT kitchen? oh, and i have a mac!
Edit: Tried the UOT kitchen, did the notification bar the way i wanted, and for some reason, i cant submit it to the kitchen because the button "submit to kitchen" is not able to be pressed! ugh!
Edit: never mind, got it to work....now uploading!

created the zip, tried to flash it, and it said installation aborted........why is this so damn hard (for me)????

Simer03 said:
created the zip, tried to flash it, and it said installation aborted........why is this so damn hard (for me)????
Click to expand...
Click to collapse
try copying the update-binary from a working zip to your "kitchen" file. Install should work

zimphishmonger said:
try copying the update-binary from a working zip to your "kitchen" file. Install should work
Click to expand...
Click to collapse
it didnt work....still aborted.... curse my noobness! :/

If you're on the latest version 1.08 of Eaglesblood for 2.3.5, then just push this SystemUI.apk into /system/app , fix the permissions, and reboot, and it should do the trick.
The reason you were having trouble before is because the stock image is a .9.png...I won't go into the details of that, but a little extra work is needed to make those files work.
This file I've included should work for ya.

mmapcpro said:
If you're on the latest version 1.08 of Eaglesblood for 2.3.5, then just push this SystemUI.apk into /system/app , fix the permissions, and reboot, and it should do the trick.
The reason you were having trouble before is because the stock image is a .9.png...I won't go into the details of that, but a little extra work is needed to make those files work.
This file I've included should work for ya.
Click to expand...
Click to collapse
Still didn't work man....sorry I'm having so much trouble, maybe I'm just unable to do it! Thanks for trying guys and taking the time to try and help :/
Sent from my LG-P999 using XDA Premium App

Ok, so you're on the latest version (1.08) of Eaglesblood for 2.3.5, correct? If you are not 100% sure, you can check in "About Phone" and check on the build.
Using the SystemUI.apk that I uploaded, what is your procedure for getting it into your phone?
Because that file has a transparent status_bar_background.9.png with correct patch handles drawn...not sure why it won't work. I will admit, that I don't have a 2.3.5 nandroid backed up to test. Anyone else?

I think I found the problem. Your rom's SystemUI/res/layout/status_bar_tracking.xml points to shade_bg.png for the background. I made that image transparent for you, and recompiled the apk. I really hope this works for you. I have to admit, I"m feeling rather dumb right now.

Yes I'm on 1.08 and my exact procedure was I downloaded the file on my phone, I went to root explorer to the xda download folder where it was located, I copied it to system/app and overwrote tthe current systemui.apk that was there, at that time, a constant endless force closes occurred so I had to pull my battery and rebooted that way, as it rebooted, the notification bar was gone, I then went to the systemui and changed permissions to where the first column is all checked and the first of the 2nd ccolumn is checked, I then pulled the battery again (cuz of the apn issue without the hard reset) and when it came back, nothing changed, so I fixed permissions via rom manager, to no avail......its frustrating!
Sent from my LG-P999 using XDA Premium App

mmapcpro said:
I think I found the problem. Your rom's SystemUI/res/layout/status_bar_tracking.xml points to shade_bg.png for the background. I made that image transparent for you, and recompiled the apk. I really hope this works for you. I have to admit, I"m feeling rather dumb right now.
Click to expand...
Click to collapse
holy crap it worked.....a million times THANKS!!! You effin rock dude! thanks for taking the time to help me! So to my understanding, u just edited the shade_bg file???? that was it??

Yeh, essentially, all I would have needed to do was edit that shade_bg.png file. But I didn't know to look there until I was forced to try to save face after giving you bad advice, lol. Now I know that some roms will point to status_bar_background.png, some will point to shade_bg, and some even simply define a hex color code...just have to decompile the SystemUI.apk, and look in res/layout/status_bar_tracking.xml to see where it's looking....and then edit that file.

mmapcpro said:
Yeh, essentially, all I would have needed to do was edit that shade_bg.png file. But I didn't know to look there until I was forced to try to save face after giving you bad advice, lol. Now I know that some roms will point to status_bar_background.png, some will point to shade_bg, and some even simply define a hex color code...just have to decompile the SystemUI.apk, and look in res/layout/status_bar_tracking.xml to see where it's looking....and then edit that file.
Click to expand...
Click to collapse
so now that i know it works, i was wondering if i wanted to create one, do i make it 200 x 200 like the current shade_bg file is? i kinda want to make one with a black background with semi transparency! I tried editing the shade_bg file u made, with a program called Gimp, but it didnt work

Can you give me your exact method to doing this? I created an image from gimp, i saved it as shade_bg.png, so basically , i extracted the systemui.apk from root explorer, it put the extracted in my sd card, so i plugged in my phone in my mac, and i took that folder from my sd card, now from here, the extracted file is a zip file, so i double clicked it b/c macs can unzip files easily, so in the folder, i placed my shade_bg file into the appropriate folder.....now this is where i think i mess up, what do u do from here? I "compressed" the systemui folder to make it back into a zip, and then placed it into my sd card, i then "renamed" the file thru my phone from a .zip to a .apk, now in root explorer there is usually an icon that shows up next to the name of the files, now when i changed it, a green android icon showed up, but on the file that you had edited for me, there was a "settings" icon, u know, the standard icon for the settings app in android! i put the apk in the system/app and it didnt work, even after permissions set up! hmmm.....i promise, this will probably be my last post!
please keep in mind, i have a mac, and i do have that 7zip u mentioned in the development thread, but its called EZ7Z.....just in case i need it

If you are doing it the way you described, then you need to find a way to zip with no compression. 7 zip does that with the "store" setting...not sure about the mac version.
You don't wanna know where this was sent from.

mmapcpro said:
If you are doing it the way you described, then you need to find a way to zip with no compression. 7 zip does that with the "store" setting...not sure about the mac version.
You don't wanna know where this was sent from.
Click to expand...
Click to collapse
man, for some reason i just cant get the "settings icon" to appear after renaming the .zip to .apk from root explorer.......im pretty sure thats way too easy, i must be doing it wrong?
my apk file is not right...i tried signing it with an app from the market, tried searching for a fix, and nothing.....ur my only hope man! lol! :/

Simer03 said:
man, for some reason i just cant get the "settings icon" to appear after renaming the .zip to .apk from root explorer.......im pretty sure thats way too easy, i must be doing it wrong?
my apk file is not right...i tried signing it with an app from the market, tried searching for a fix, and nothing.....ur my only hope man! lol! :/
Click to expand...
Click to collapse
anyone know how to convert a .zip to .apk correctly?