my tab is stuck on boot animation logo of samsung i cannot find any stock firmwares anywhere pls somebody help its urgent?
i used rom toolbox to change the icons on my stock firmware but when i rebooted its stuck over there only can somebody help?
Which model do u have?
Wifi only (P6210)
Or the 3G version (P6200)
Sent from my SPH-D700 using xda premium
its gt p6210 its mentioned in the title
anmol9900 said:
its gt p6210 its mentioned in the title
Click to expand...
Click to collapse
PM sent
Sent from my SPH-D700 using xda premium
Ceelos09 said:
PM sent
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
I have the same problem, can you please help me
I don't have this problem, but if I were in this situation, I would use ODIN to flash a ROM. You will lost everything, though.
ngc2264 said:
I don't have this problem, but if I were in this situation, I would use ODIN to flash a ROM. You will lost everything, though.
Click to expand...
Click to collapse
I too had the same issue and resolved it by flashing a ROM with ODIN.
mdoomz said:
I have the same problem, can you please help me
Click to expand...
Click to collapse
If you're rooted, boot into CWM and clear cache and data and try restarting the tab. If that doesn't work, then do a factory reset. Last option would be to Odin. I still have the old official HC LA3 firmware if u need it, although most of us have gone over and flashed the UK ICS firmware. Don't know why Sammy hasn't given us U.S users an official American ICS release yet.
Sent from my SPH-L710 using xda premium
Ceelos09 said:
I still have the old official HC LA3 firmware if u need it, although most of us have gone over and flashed the UK ICS firmware. Don't know why Sammy hasn't given us U.S users an official American ICS release yet.
Click to expand...
Click to collapse
So, when the U.S. version comes out, if I have the non-rooted U.K 4.0.4 version installed, can I use Odin to install the U.S. version without root?
.
Related
Samsung start Android 4.0.4 updates Galaxy Tab 7.0 Plus WIFI
http://www.sammobile.com/2012/07/16/samsung-start-android-4-0-4-updates-galaxy-tab-7-0-plus-wifi/
pintunoor said:
Samsung start Android 4.0.4 updates Galaxy Tab 7.0 Plus WIFI
http://www.sammobile.com/2012/07/16/samsung-start-android-4-0-4-updates-galaxy-tab-7-0-plus-wifi/
Click to expand...
Click to collapse
still no U.S i see
Just ODIN it. Its so much better than waiting on Sammy to get off their asses, and its still a fully supported FW.
robyr said:
Just ODIN it. Its so much better than waiting on Sammy to get off their asses, and its still a fully supported FW.
Click to expand...
Click to collapse
oh ok thanks.. will do
robyr said:
Just ODIN it. Its so much better than waiting on Sammy to get off their asses, and its still a fully supported FW.
Click to expand...
Click to collapse
Agreed. I just grabbed it and odined it to my US 6210 didn't even wipe data totally forgot. Everything works great, no bugs, and the wifi connection is much better now. :good::good:
ejhart said:
Agreed. I just grabbed it and odined it to my US 6210 didn't even wipe data totally forgot. Everything works great, no bugs, and the wifi connection is much better now. :good::good:
Click to expand...
Click to collapse
hey if i may ask, which one did u odin?
Can someone confirm that the IR Blaster still works? its why I bought the P6210
How do i go about doin this? And united kingdom is pretty much the exact same thing as usa right? I mean they speak english n all? So how do i go about doin this?
Sent from my GT-P6210 using Tapatalk 2
Yea get united kingdom.. Change language to us and your good to go. Flash with odin
Sent from my GT-P6210 using xda premium
Root
Does the previous root method still work for ICS ? I need my titanium backup ! lol
It has nothing to do with development, but thanks for information! :good:
I have the Galaxy Rom installed on my Tab , can i just flash this in CWM or do i have to use Odin ?
Used Odin, works great. Thanks for the info.
Sent from my GT-P6210 using Tapatalk 2
What link do i use for p6210 wifi only????
Sent from my GT-P6210 using Tapatalk 2
likenota said:
What link do i use for p6210 wifi only????
Sent from my GT-P6210 using Tapatalk 2
Click to expand...
Click to collapse
England
Sent from my GT-P6210 using Tapatalk 2
Whats the link bro? Im tired of these twist n turns i wanna give ics a try!
Sent from my GT-P6210 using Tapatalk 2
likenota said:
Whats the link bro? Im tired of these twist n turns i wanna give ics a try!
Sent from my GT-P6210 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I don't see a link for the 6210 either, only the P6810 and the P1010.
Uploading to my dropbox, will post when done.
While its loading, to get ready you need Odin, I suggest paid from the market. Extract the zip. I used ES File Explorer.
http://db.tt/cd30lxmh
Sent from my GT-P6210 using Tapatalk 2
This is the UK/Ireland firmware for the 6210, not the US firmware. Is anyone having issues with WiFi? I thought I read somewhere they use different frequencies over there.
litesout said:
This is the UK/Ireland firmware for the 6210, not the US firmware. Is anyone having issues with WiFi? I thought I read somewhere they use different frequencies over there.
Click to expand...
Click to collapse
No issues with wifi so far.
Sent from my PG86100 using xda premium
The worst has happened and it's all my fault
Having not used my Galaxy Tab for some weeks (I've been using my SGS III) I updated to the latest Brazillian ICS firmware and for a stupid reason did a factory rest which has resulted in me bricking my Tab.
I am now getting a boot loop on the screen that states it's a Galaxy Tab Plus, I can get into download mode but not recovery.
Having read a number of posts of similar problems, have tried flashing a .pit file and firmware but still no joy. It seems that it may have to be a trip to the Samsung Service Centre. Thankfully in download mode it is still showing a stock firmware with a zero counter.
Would be interested for any experiences on people who have had to return it to a service centre and whether I may get any potential problems as it was bought off ebay around 6 months ago and is the P-6200L model.
Any help is appreciated :good:
I'm not sure about this but u may try to flash cm10.. firstly download pit file and Odin then u flash the pit file.. also download cwm and cm10 then flash cm using cwm.. then wait for the device to reboot.. it works for me.. ^_^
Sent from my GT-P6200 using Tapatalk 2
peterpan01 said:
I'm not sure about this but u may try to flash cm10.. firstly download pit file and Odin then u flash the pit file.. also download cwm and cm10 then flash cm using cwm.. then wait for the device to reboot.. it works for me.. ^_^
Sent from my GT-P6200 using Tapatalk 2
Click to expand...
Click to collapse
Can you point me to these files you have mentioned...
Pit..
CM 10...
Sent from my GT-I9070 using xda app-developers app
please dont do
mazlum78 said:
Can you point me to these files you have mentioned...
Pit..
CM 10...
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
im sorry but please dont do it.. i try to do wipe for the new rom and its happen again and i think you have to wait for samsung developer to fix it.. here is the statement.. http://www.xda-developers.com/android/samsung-diligently-working-towards-hardbrick-fix/
kersey said:
The worst has happened and it's all my fault
Having not used my Galaxy Tab for some weeks (I've been using my SGS III) I updated to the latest Brazillian ICS firmware and for a stupid reason did a factory rest which has resulted in me bricking my Tab.
I am now getting a boot loop on the screen that states it's a Galaxy Tab Plus, I can get into download mode but not recovery.
Having read a number of posts of similar problems, have tried flashing a .pit file and firmware but still no joy. It seems that it may have to be a trip to the Samsung Service Centre. Thankfully in download mode it is still showing a stock firmware with a zero counter.
Would be interested for any experiences on people who have had to return it to a service centre and whether I may get any potential problems as it was bought off ebay around 6 months ago and is the P-6200L model.
Any help is appreciated :good:
Click to expand...
Click to collapse
I had the same thing yesterday.... If I look at the article there is a link there to an article and if you read that I see the advise to flash the original firmware through Odin maybe you can give that a try? I haven't had the change yet... but will try this afternoon... If that doesn't work I will also try aorth's post and if that fails I going back to the service center....
bossie1975 said:
I had the same thing yesterday.... If I look at the article there is a link there to an article and if you read that I see the advise to flash the original firmware through Odin maybe you can give that a try? I haven't had the change yet... but will try this afternoon... If that doesn't work I will also try aorth's post and if that fails I going back to the service center....
Click to expand...
Click to collapse
Have tried flashing a variety of different firmwares for my P6200 even the .pit files but still no luck.
Have spoken to a pleasant customer services gentleman who's arranged for me to return it and have it repaired under warranty.
Must make mental note to self NOT to do a factory reset via the default recovery option ever again
kersey said:
Have tried flashing a variety of different firmwares for my P6200 even the .pit files but still no luck.
Have spoken to a pleasant customer services gentleman who's arranged for me to return it and have it repaired under warranty.
Must make mental note to self NOT to do a factory reset via the default recovery option ever again
Click to expand...
Click to collapse
I tried the ICS from samfirmware through Odin, but no luck... The last option is to try and "downgrade" to Honeycomb (through Odin) if that fails I will go back to service...
*fingers crossed*
aorths post
kersey said:
Have tried flashing a variety of different firmwares for my P6200 even the .pit files but still no luck.
Have spoken to a pleasant customer services gentleman who's arranged for me to return it and have it repaired under warranty.
Must make mental note to self NOT to do a factory reset via the default recovery option ever again
Click to expand...
Click to collapse
i haven't try aorth post yet but if u success with it, please feel free to show it to us.. i have try it but cant use because its say usblib -12 error..
support the xda developer
Click to expand...
Click to collapse
bossie1975 said:
I tried the ICS from samfirmware through Odin, but no luck... The last option is to try and "downgrade" to Honeycomb (through Odin) if that fails I will go back to service...
*fingers crossed*
Click to expand...
Click to collapse
I tried that but sadly no luck with my device
peterpan01 said:
i haven't try aorth post yet but if u success with it, please feel free to show it to us.. i have try it but cant use because its say usblib -12 error..
Click to expand...
Click to collapse
Tried using Heimdall earlier but can't get it to recognise my device, neither will Kies now...back to Samsung is my only chance now!!!
Dude I had the same Problem. Flashed I've again with odyn and wiped everything 4-5times
I've given up... device will be sent back to service desk today for repair. Hopefully under waranty as I didn't root yet nor flashed a custom rom... I did, however, install CWM 6.0.0.8, but I guess that is not an issue (can anybody confirm?)
U need to change to stock recovery, my waranty was void and need to pay $170 due to there change to the new board.
Sent from my GT-P6200 using xda premium
bujai5279 said:
U need to change to stock recovery, my waranty was void and need to pay $170 due to there change to the new board.
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
Great.... Any ideas on how to change back to stock recovery...?
kersey do you try install clockworkmod 6.0.1.0 (aorth's post) by Heimdall 1.3.1 in a linux machine? Maybe the linux find your USB device like an user posted in the same topic...
I do it this in the morning and no have problem. I have a brazilian GT-P6210 with JB now... works fine.
Sent from my Galaxy Nexus using xda premium
Espetakus said:
kersey do you try install clockworkmod 6.0.1.0 (aorth's post) by Heimdall 1.3.1 in a linux machine? Maybe the linux find your USB device like an user posted in the same topic...
I do it this in the morning and no have problem. I have a brazilian GT-P6210 with JB now... works fine.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thanks for the help but sent my device back to Samsung this morning. Very impressed that they sent a pre-paid Special Delivery envelope and bubble wrap to return the device to them. Hope they don't take too long to sort it.
Sent from my GT-I9300 using xda premium
kersey said:
Thanks for the help but sent my device back to Samsung this morning. Very impressed that they sent a pre-paid Special Delivery envelope and bubble wrap to return the device to them. Hope they don't take too long to sort it.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Wow... you had this service here in Brazil? I'm impressed.
Enviado de meu Galaxy Nexus usando o Tapatalk 2
Espetakus said:
Wow... you had this service here in Brazil? I'm impressed.
Enviado de meu Galaxy Nexus usando o Tapatalk 2
Click to expand...
Click to collapse
No mate, am in the UK, which is even more impressive for the quality of service so far...
P6200DXLPB rom
bossie1975 said:
I had the same thing yesterday.... If I look at the article there is a link there to an article and if you read that I see the advise to flash the original firmware through Odin maybe you can give that a try? I haven't had the change yet... but will try this afternoon... If that doesn't work I will also try aorth's post and if that fails I going back to the service center....
Click to expand...
Click to collapse
im already try flashing the new rom P6200DXLPB http://www.sammobile.com/firmware/?page=3&model=GT-P6200&pcode=XME&os=1&type=3#firmware and i wipe the cache.. after that i rebooting and it say cant mount data /data rebooting.. i hope this will help the developer a clue about how to fix it..
Where can I find the US version of ICS firmware for my galaxy tab 7 plus wifi. Pls, help. I am new member of XDA community
Well, in theory, it should arrive via KIES for the PC or you can check for it using your tab. Go to Settings/about this device/Software Update and check their server.
Personally, I'm still waiting for the update. I chatted with Samsung and they said that they were rolling out the update in batches and to be patient. grrrr.
An alternate way is through some celluar site. You'll have to dig around for that thread.
G.B. Says
and remember, talking dogs are liars.
nepalikhate said:
Where can I find the US version of ICS firmware for my galaxy tab 7 plus wifi. Pls, help. I am new member of XDA community
Click to expand...
Click to collapse
if you are on gt-p6210 wifi only
http://www.sammobile.com/firmware/?page=3&model=GT-P6210&pcode=XAR&os=1&type=3#firmware
cellular south 4.0.4
I already have UK version of ICS but I prefer to have US version.
Sent from my GT-P6210 using xda premium
nepalikhate said:
I already have UK version of ICS but I prefer to have US version.
Sent from my GT-P6210 using xda premium
Click to expand...
Click to collapse
Use Kies, then. It is pretty straightforward - I was brand new to it, downloaded it from the Samsung website, installed, plugged in my device, waited about 2-3 minutes (didn't need to "sync" anything), and it said there was an update. I hit "ok" through the process, and in about 15 minutes or less, I had ICS.
It is now official. Just check your updates now.
nepalikhate said:
I already have UK version of ICS but I prefer to have US version.
Sent from my GT-P6210 using xda premium
Click to expand...
Click to collapse
How can I find the any version of ICS firmware for my galaxy tab 7 Plus P6200.
Thanks
allnepal said:
How can I find the any version of ICS firmware for my galaxy tab 7 Plus P6200.
Thanks
Click to expand...
Click to collapse
Go to sammobile.com
I have A Galaxy s2 Plus NFC phone. The CSC is XEF (France). Since a year i have been waiting for sammobile or samsung-update to put up the updates firmware. Last i checked 5 minutes ago and can confirm that its not there yet. I have also tried OTA, but to no advantage. I am still using 4.1.1
Can I flash any other countries firmware on my 9105P? Like DBT(German) or any other one
Also let me know that if i flash german 4.2.2 firmware on my french phone, will i get modem or signal or any other issues? or flashing won't be possible at all???
Maisam.asif said:
I have A Galaxy s2 Plus NFC phone. The CSC is XEF (France). Since a year i have been waiting for sammobile or samsung-update to put up the updates firmware. Last i checked 5 minutes ago and can confirm that its not there yet. I have also tried OTA, but to no advantage. I am still using 4.1.1
Can I flash any other countries firmware on my 9105P? Like DBT(German) or any other one
Also let me know that if i flash german 4.2.2 firmware on my french phone, will i get modem or signal or any other issues? or flashing won't be possible at all???
Click to expand...
Click to collapse
U can flash other country firmware via odin without problems. I have flashed germany firmware
Sent from my GT-I9105P using XDA Premium 4 mobile app
Yes u can, but if u want to take advantage of ur warranty for repairing phone u need to reflash 4.1...
Cooetzee said:
Yes u can, but if u want to take advantage of ur warranty for repairing phone u need to reflash 4.1...
Click to expand...
Click to collapse
U can't reflash 4.2.2 to 4.1.2 cuz bootloader
Sent from my GT-I9105P using XDA Premium 4 mobile app
rs tony said:
U can't reflash 4.2.2 to 4.1.2 cuz bootloader
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not true you cn go back to 4.1.2
Sent from my GT-I9105P using XDA Free mobile app
Thanks all. I am downloading 4.2.2 DBT ROM now.
Maisam.asif said:
Thanks all. I am downloading 4.2.2 DBT ROM now.
Click to expand...
Click to collapse
Make sure you get the latest, XXUBNB1.
Yo guys Aditya here...! I was browsing in this section and too many questions you have about how why when?
If you are looking for answers this thread is for you. Ask me questions related to this firmware...!
F. A. Q
1)Will it work on any other Sm t21x?
Nope. It won't as this is only for SM T211. Tab 3.7
2)I have Indian tab will it work on it?
Yes of course why not. Actually all these should work.
3)What if i stuck on boot loop(Just Samsung logo)
Do one thing go to recovery mode. Pressing home+power+vol.down and wipe data.
Need any other help do comment here.....
HAPPY TO HELP.
Sent from my GT-I9082 using XDA Premium 4 mobile app
Anyone give me direct downloading link
Sent from my SM-T211 using XDA Free mobile app
Glady 007 said:
Anyone give me direct downloading link
Sent from my SM-T211 using XDA Free mobile app
Click to expand...
Click to collapse
You can download by sammobile.com , but its only for italy.
bierma32 said:
You can download by sammobile.com , but its only for italy.
Click to expand...
Click to collapse
wrong its work on all country
Anil Shovo said:
wrong its work on all country
Click to expand...
Click to collapse
Thats are right,but we must post it that this was released for italy.
bierma32 said:
Thats are right,but we must post it that this was released for italy.
Click to expand...
Click to collapse
Can we change the the system language from Italian to English? And does the new fw recognize other phone networks outside of Italy?
RaisaLoorden91 said:
Can we change the the system language from Italian to English? And does the new fw recognize other phone networks outside of Italy?
Click to expand...
Click to collapse
- english language is availble of coarse
- for the second one i am not sure but it should
Yeah they should.
Sent from my GT-I9082 using XDA Premium 4 mobile app
Yes it does.
Sent from my LG-D802 using XDA Premium HD app
safariking said:
- english language is availble of coarse
- for the second one i am not sure but it should
Click to expand...
Click to collapse
stoney73 said:
Yes it does.
Sent from my LG-D802 using XDA Premium HD app
Click to expand...
Click to collapse
I see. Still, I heard there are problems concerning the new FW about the tablet being unrooted if you flash KK on it and the samsung logo not appearing in the booting screen. Is there any way for the root to stay? I already know that there are a few bug issues in the software like the fast battery drain and I can handle that but the root though...I don't really want my device being bricked or whatever. I'm still a newbie about this so I wanted to find more information if possible before doing anything first.
RaisaLoorden91 said:
I see. Still, I heard there are problems concerning the new FW about the tablet being unrooted if you flash KK on it and the samsung logo not appearing in the booting screen. Is there any way for the root to stay? I already know that there are a few bug issues in the software like the fast battery drain and I can handle that but the root though...I don't really want my device being bricked or whatever. I'm still a newbie about this so I wanted to find more information if possible before doing anything first.
Click to expand...
Click to collapse
Its official don't worry so much
Sent from my SM-T211 using Tapatalk
T3snake said:
Its official don't worry so much
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
I know it's official and everthing but that's not what I'm worried about. My tablet's already rooted with a custom rom and a blackhawk kernel in it. I read from the other posts that you'd be stuck in the booting screen if you flash the KK due to the logo missing and that you'll lose the root and will never be rooted again due to KK leaving a signature on the build or something. I'm not exactly sure what steps to take to prevent it though and I wanted to flash KK so bad. I just want to know if anyone knows how to flash KK in my already rooted tablet without encountering those two issues I just stated above.
Anyone?
RaisaLoorden91 said:
I know it's official and everthing but that's not what I'm worried about. My tablet's already rooted with a custom rom and a blackhawk kernel in it. I read from the other posts that you'd be stuck in the booting screen if you flash the KK due to the logo missing and that you'll lose the root and will never be rooted again due to KK leaving a signature on the build or something. I'm not exactly sure what steps to take to prevent it though and I wanted to flash KK so bad. I just want to know if anyone knows how to flash KK in my already rooted tablet without encountering those two issues I just stated above.
Anyone?
Click to expand...
Click to collapse
You can always get root access again either by pre-rooting the firmware or by a custom recovery image in several different ways.
fldc said:
You can always get root access again either by pre-rooting the firmware or by a custom recovery image in several different ways.
Click to expand...
Click to collapse
I don't think I can do the pre-rooting one. My computer doesn't run in Linux and I'm currently out of the country (and probably will be for months) to do anything about it.
Can you please tell me how to do it using custom recovery? You mentioned that there are different ways to do it?
RaisaLoorden91 said:
I don't think I can do the pre-rooting one. My computer doesn't run in Linux and I'm currently out of the country (and probably will be for months) to do anything about it.
Can you please tell me how to do it using custom recovery? You mentioned that there are different ways to do it?
Click to expand...
Click to collapse
I am on kitkat t211
U have to install cwm and then tge root package
Sent from my GT-S5282 using Tapatalk
T3snake said:
I am on kitkat t211
U have to install cwm and then tge root package
Sent from my GT-S5282 using Tapatalk
Click to expand...
Click to collapse
Ok. But just to be clear this is after flashing the KK right?
Sorry for the inconvenience. ?
RaisaLoorden91 said:
Ok. But just to be clear this is after flashing the KK right?
Sorry for the inconvenience. ?
Click to expand...
Click to collapse
Of course
I was completely conscious when I answered ur question......
Sent from my SM-T211 using Tapatalk
Hi all. I have tab 3 T211 update android 4.4.2, instal CWM and rooted already, but have problem affter hard restet enter CWM only.
stock firmware for galaxy sm-t211
guys i hav bricked my tab 3 sm-t211 while trying to root it with kingo app.... can any one ples provide the link to stock firmware...if possible google link.. thanks...need very urgently...:crying:
menaxfearisfun said:
guys i hav bricked my tab 3 sm-t211 while trying to root it with kingo app.... can any one ples provide the link to stock firmware...if possible google link.. thanks...need very urgently...:crying:
Click to expand...
Click to collapse
Go to sammobile.com
Its the official site for odin and kies packages.
Search for ur model no. SM-T211
Sent from my GT-S5282 using Tapatalk