I am new to the ASUS family of tablets, and j just can't figure out how to root. I have rooted many tablets and installed custom roms before but the i cannot follow the how tos listed here. For one fastboot doesnt work on my computer. It opens and closes immediately. What i would like is a detailed step by step guide with a trouble shooting guide. I mean now i reading about downgrading, blob files and a few other things i never dealt with on my galaxy. Someone help......would love to root this thing. Email me if u want [email protected]
You need to run fastboot from the DOS Prompt
start run - cmd
then type fastboot command.
I take it you have unlocked your bootloader?
Check this thread, it has videos about rooting and whatnot, hope it helps:
http://forum.xda-developers.com/showthread.php?t=1663244
Northern-Loop said:
You need to run fastboot from the DOS Prompt
start run - cmd
then type fastboot command.
I take it you have unlocked your bootloader?
Click to expand...
Click to collapse
Yes, Bootloader is unlocked. Ok, so I tried the flashboot command, so now what? I typed the command from the walkthru "fastboot -i 0x0B05 flash recovery recovery.img " but get an errorcannot load recovery.img. So what am I missing. I have the recovery image on my desktop.....
Put the recovery image in the same folder as your fastboot application and it should work.
xAshxMoneyx said:
Put the recovery image in the same folder as your fastboot application and it should work.
Click to expand...
Click to collapse
....what fastboot folder? I installed the ADK per the instructions, I downloaded the root and recovery image. I looked in the system for a fastboot folder and do not see it. Plus when I try to type in the fastboot command now, it says it is not a recognized command. I am sure this is something simple, but I am just not getting it. Is there a more detailed step by step somewhere that will actually walk you thru the steps without assuming you know what they are talking about? I can root my phone, my galaxy tab all day long and install and change ROMS, but this one has me upside down.
When you installed android SDK and ran SDK manager to install the tools, it should create a "platform tools" folder. In that folder you should see "fastboot.exe." Put the recovery image into the same platform tools folder.
Make sure when you run the command that you are in the command prompt, and that you have navigated to the same platform tools folder. It should then recognize the fastboot command and flash your recovery.
xAshxMoneyx said:
When you installed android SDK and ran SDK manager to install the tools, it should create a "platform tools" folder. In that folder you should see "fastboot.exe." Put the recovery image into the same platform tools folder.
Make sure when you run the command that you are in the command prompt, and that you have navigated to the same platform tools folder. It should then recognize the fastboot command and flash your recovery.
Click to expand...
Click to collapse
Found the folder and it did have the platform tools in it but Apparently I have forgotten how to navigate in CMD, so I moved the folder to the current location CMD was at. I typed in the command fromt the walkthrough and I get "adbwinapi.dll" is not installed. Not sure if this is progress or not.....so now what.
That file should be in your platform tools folder as well. I think it's a driver issue. Is your tablet showing up in device manager? Does it have a yellow triangle? I'm not really an expert unfortunately, hopefully someone with more knowledge can jump in.
xAshxMoneyx said:
That file should be in your platform tools folder as well. I think it's a driver issue. Is your tablet showing up in device manager? Does it have a yellow triangle? I'm not really an expert unfortunately, hopefully someone with more knowledge can jump in.
Click to expand...
Click to collapse
So I think I am going to delete everything and start from scratch. This shouldn't be this difficult. Here we go......
tccc143 said:
So I think I am going to delete everything and start from scratch. This shouldn't be this difficult. Here we go......
Click to expand...
Click to collapse
Ok, so reinstalled everything.....did a quick refresher on CMD directions and had it rooted with CWM in 10 minutes. I have been working in Android so long without the use of a PC that I forgot how to use the PC. Thanks for the help....now we wait for some nice roms.
Sweet, glad you got it, I've done this stuff a few times but I always have to refresh myself and take it slow on each different device.
tccc143 said:
Found the folder and it did have the platform tools in it but Apparently I have forgotten how to navigate in CMD, so I moved the folder to the current location CMD was at. I typed in the command fromt the walkthrough and I get "adbwinapi.dll" is not installed. Not sure if this is progress or not.....so now what.
Click to expand...
Click to collapse
You should not move the folder. This can cause all kinds of problems. in the cmd prompt just type
cd \folder\folder\etc.
The cd means change directory and you start off with a backslash to set the initial path to the root of your drive. if folder names include spaces then wrap the path with quotes, cd "\folder one\folder two\etc". the prompt should change from C:\windows or whatever to what you typed in.
if you've installed on a drive other than C: then first change to that drive by typing the drive letter followed by a colon, ie D:
Good old DOS will never die.
Sent from my SCH-I510 using XDA
Related
I am pulling my hair out. I have SDK installed and whatever I was instructed to install on SDK, for the life of me I can't get the command shell to work. When I open a command shell and type adb. I get a message 'adb' is not a recognized as an internal or external command, operable batch or program file.
My phone is plugged in debugging checked, I have it set to mass storage, not kies. What am I doing wrong.
Sorry for the noob question. I have been reading every forum I can find, every document I can find. I am trying to learn and I like to mess with my phone and should know how to use adb command shells.
Can someone tell me what I am doing wrong?
Thanks.
Rhiannon224 said:
I am pulling my hair out. I have SDK installed and whatever I was instructed to install on SDK, for the life of me I can't get the command shell to work. When I open a command shell and type adb. I get a message 'adb' is not a recognized as an internal or external command, operable batch or program file.
My phone is plugged in debugging checked, I have it set to mass storage, not kies. What am I doing wrong.
Sorry for the noob question. I have been reading every forum I can find, every document I can find. I am trying to learn and I like to mess with my phone and should know how to use adb command shells.
Can someone tell me what I am doing wrong?
Thanks.
Click to expand...
Click to collapse
PC or mac?
On a PC cd /Android/Tools then use adb commands
on a Mac: cd /Android/Tools then use ./adb then the command
PC. Thanks I will try that.
update
system cannot find the path specified
I am ready to delete everything and start over, maybe the path is wrong and I borked something in the download. There should be an Android for dummy's book or something, for us noobs.
where did you install the files? You had to download the SDK and unzip it.
Then you use a command window to change directories to where ever you installed it. Then run the commands.
If you don't know how to move around directories using DOS commands, you better find a tutorial on that first.
Your problems sound like you are not in the tools directory - CMD issues not Adroid - CMD is the windows shell btw.
alphadog00 said:
where did you install the files? You had to download the SDK and unzip it.
Then you use a command window to change directories to where ever you installed it. Then run the commands.
If you don't know how to move around directories using DOS commands, you better find a tutorial on that first.
Your problems sound like you are not in the tools directory - CMD issues not Adroid - CMD is the windows shell btw.
Click to expand...
Click to collapse
downloaded and upzipped. It's in a folder named Android, in my c;/drive. I watched a tutorial and put it where I thought I was supposed to, then I made sure to edit the path. I can undo that. I know it's a CMD issue. Great DOS commands, this is a little over my head.
I's probably easier for me to delete everything and start over.
Is there an ADB for dummies or anything. I find them for other devices not Captivate?
if you change directories to the tools directory, do you see adb.exe listed? I am not sure which tutorial you used, but there is no reason to edit the path if you change directly into the android sdk/tools directory.
In a CMD window, change to the tools directory and do a DIR and see if the first file is adb.exe
Deleting and starting over is not going to change things at this point. Also ADB is a command that works the same regardless of which phone you have. The only things that are different is if you can mount the system partition - depends on your kernel - is it custom. Not phone dependent though.
alphadog00 said:
if you change directories to the tools directory, do you see adb.exe listed? I am not sure which tutorial you used, but there is no reason to edit the path if you change directly into the android sdk/tools directory.
In a CMD window, change to the tools directory and do a DIR and see if the first file is adb.exe
Deleting and starting over is not going to change things at this point. Also ADB is a command that works the same regardless of which phone you have. The only things that are different is if you can mount the system partition - depends on your kernel - is it custom. Not phone dependent though.
Click to expand...
Click to collapse
Thanks I did this and no it isn't listed. the Android folder is, that is where I extracted all the files. Should I move from the folder. After extracting the files did I need to install anything from it?
Rhiannon224 said:
Thanks I did this and no it isn't listed. the Android folder is, that is where I extracted all the files. Should I move from the folder. After extracting the files did I need to install anything from it?
Click to expand...
Click to collapse
You should have extracted everything. You should have a folder that extracted:
android-sdk-windows and in that a tools folder. In the tools folder is ADB.exe
It is one big zip file - nothing to install - just unzip where you want it.
hold shift and then right click on that tools folder(wherever you put it), select open command window here from the menu, then type adb to make sure it worked
Kagoshema said:
hold shift and then right click on that tools folder(wherever you put it), select open command window here from the menu, then type adb to make sure it worked
Click to expand...
Click to collapse
Thank you. That did the trick. It is there and it worked. So I am guessing that when I want to open a command shell and use ADB this is how I will be able to do it. Thank you so much for all of your help everyone.
I am very new to Android and smart phones, 7 weeks now and I am trying to learn as much as I can and I try to find the information without asking too many questions.
Last night with SRE and it's sleeping death made me realize that I need to know how to use ADB and a command shell should things go wrong.
Again, thanks to everyone for the help.
I couldn't find a guide for this anywhere, so after a lot of trial and error, I worked out this method from various write ups on the web.
Preq's:
Make sure your battery is fully charged (I have no idea why, but it seems to be a must do thing)
You'll need the Android SDK, so make sure you have this and you'll be needing Fastboot for Mac, which you can find here Fastboot
And you need to boot your phone in fastboot mode.
Drop the Fastboot file into to the tools directory of the SDK.
Download your desired radio image and put it in the same same folder.
To make sure Fastboot is working, open Terminal and type "fastboot devices"
(without the speech marks) and hit return. You should see:
List of devices attached
HXXXXXXXXXX device
Click to expand...
Click to collapse
XXXXXXXXXX = the unique number of your phone.
If it doesn't display anything, you need to re-check SDK and Fastboot are installed properly.
If you do, carry on.
Now, the nervous part.
1. Open the tools directory of the SDK in a Finder window and the open a Terminal window.
2. Now, drag the 'fastboot-mac' file in to the Terminal window.
3. Type this (make sure you hit the space bar after typing) :
flash radio
Click to expand...
Click to collapse
4. Now, drag the radio.img to the Terminal window
(It should read something like this)
/Users/Liam/SDK/tools/fastboot flash radio /Users/Liam/SDK/tools/radio.img
Click to expand...
Click to collapse
5. Hit the return key and wait. Make sure you touch nothing.
6. When terminal has given you the "Okay" message twice, check you phone screen and make sure there isn't a red loading bar on the top left hand side of your phones screen. When this is done, type:
fastboot reboot
Click to expand...
Click to collapse
And hit return.
7. Your phone will reboot and you're done.
If I've missed anything, let me know and I'll add it.
been trying for a few days now heads gone all i get it adbwinapi.dll is missing tried several reinstalls now need help please guys system is win 7 ultimate
steve36 said:
been trying for a few days now heads gone all i get it adbwinapi.dll is missing tried several reinstalls now need help please guys system is win 7 ultimate
Click to expand...
Click to collapse
Wrong thread. But the thread you want, and the answer, is here: http://forum.xda-developers.com/showpost.php?p=10113370&postcount=91
Do some searching first..
Anyways, yeah, now I can use my MacBook.
This seems to be an odd way of doing it.
Just download the fastboot-mac binary from the htc developer page. Drop it in the platform-tools folder of the androd SDK.
Start a Terminal and run:
/path/to/platform-tools/fastboot-mac flash radio radio.img
make sure you have radio.img in the current directory where you invoke the script.
I found it easier to drag and drop the files. Saves lots of typing and does the same job.
liam08 said:
I couldn't find a guide for this anywhere, so after a lot of trial and error, I worked out this method from various write ups on the web.
Preq's:
Make sure your battery is fully charged (I have no idea why, but it seems to be a must do thing)
You'll need the Android SDK, so make sure you have this and you'll be needing Fastboot for Mac, which you can find here Fastboot
And you need to boot your phone in fastboot mode.
Drop the Fastboot file into to the tools directory of the SDK.
Download your desired radio image and put it in the same same folder.
To make sure Fastboot is working, open Terminal and type "fastboot devices"
(without the speech marks) and hit return. You should see:
XXXXXXXXXX = the unique number of your phone.
If it doesn't display anything, you need to re-check SDK and Fastboot are installed properly.
If you do, carry on.
Now, the nervous part.
1. Open the tools directory of the SDK in a Finder window and the open a Terminal window.
2. Now, drag the 'fastboot-mac' file in to the Terminal window.
3. Type this (make sure you hit the space bar after typing) :
4. Now, drag the radio.img to the Terminal window
(It should read something like this)
5. Hit the return key and wait. Make sure you touch nothing.
6. When terminal has given you the "Okay" message twice, check you phone screen and make sure there isn't a red loading bar on the top left hand side of your phones screen. When this is done, type:
And hit return.
7. Your phone will reboot and you're done.
If I've missed anything, let me know and I'll add it.
Click to expand...
Click to collapse
Hi i did not notice your guide so i created one last night >>>>here<<<<
I use this:
http://qtadb.wordpress.com/
I cannot get terminal to respond to "fastboot devices"
I think i've installed it all ? I've run the adk with android in the tools folder, and I have the platform tools folder. i've run fastboot-mac, i don't know what else to do?
P1xelVandal said:
I cannot get terminal to respond to "fastboot devices"
I think i've installed it all ? I've run the adk with android in the tools folder, and I have the platform tools folder. i've run fastboot-mac, i don't know what else to do?
Click to expand...
Click to collapse
Use my guide downloaded the zip file read all of first post sorted
E=Mc2
leith51 said:
Use my guide downloaded the zip file read all of first post sorted
E=Mc2
Click to expand...
Click to collapse
it's a shame all the files are .exe and .bat *sigh* thanks anyway.
P1xelVandal said:
it's a shame all the files are .exe and .bat *sigh* thanks anyway.
Click to expand...
Click to collapse
localhost:~ Mac$ /fastboot/fastboot-mac flash radio /fastboot/radio.img
sending 'radio' (24832 KB)... OKAY
writing 'radio'... FAILED (remote: not allowed)
localhost:~ Mac$
what am i doing wrong? (no i will not switch to PC))
This guy used my thread his problem was he didn't have eng s-off
E=Mc2
So I have my Xoom unlocked and I am trying to flash the recovery in order to root. I have the recovery in the platform tools folder along with fastboot and all that, and I'm able to get the Xoom into fastboot from adb, but I can't get the recovery to flash. I'm typing the name correct. And I'm putting in 'fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img' without the quotes. Honestly I'm a little bit stumped at this point.
I have had the same issue for the past few days I have also tried the steps here no luck.... http://forum.xda-developers.com/showthread.php?t=1249798
supenova3000 said:
I have had the same issue for the past few days I have also tried the steps here no luck.... http://forum.xda-developers.com/showthread.php?t=1249798
Click to expand...
Click to collapse
I used the same guide. It just makes no sense that I can control the Xoom and unlock it, but I can't flash the darn recovery.
williamthegoat said:
I used the same guide. It just makes no sense that I can control the Xoom and unlock it, but I can't flash the darn recovery.
Click to expand...
Click to collapse
I tried moving the files from the tools folder to platform tools still no luck.. all of this for the I C S flash I'm going to keep working on a solution I will let you know if I have any luck!
So I have the android sdk in c:\ , and in the sdk folder I have everything, and in the platform tools I have my fastboot and recovery. I then use cmd to get into adb, then I put the xoom in fastboot. From there I try to flash the recovery, which always fails. I must be doing something wrong here.
Try downloading the IMG again. Or try out the rogue recovery. I actually like rogue better.
Sent from my MB860 using xda premium
I finally got it. In command I needed to direct it to the platform tools folder and then it flashed just fine. I am now rooted. Now to learn about flashing ICS
Thanks for the responses and help guys
Think you have to be stock to flash to ICS, at least that was the word yesterday.
I gave up trying to root just as I found out about the ICS update.
williamthegoat said:
I finally got it. In command I needed to direct it to the platform tools folder and then it flashed just fine. I am now rooted. Now to learn about flashing ICS
Thanks for the responses and help guys
Click to expand...
Click to collapse
Two simple errors:
1) not opening the command window from the folder where you have fastboot and the image files you're trying to flash; and
2) not realizing that you have hidden file extensions in Windows, and typing ...recovery.img.img
williamthegoat said:
So I have my Xoom unlocked and I am trying to flash the recovery in order to root. I have the recovery in the platform tools folder along with fastboot and all that, and I'm able to get the Xoom into fastboot from adb, but I can't get the recovery to flash. I'm typing the name correct. And I'm putting in 'fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img' without the quotes. Honestly I'm a little bit stumped at this point.
Click to expand...
Click to collapse
I assume that you've set up a path in environment variables to run adb and fastboot from ay directory... and are running the flash command from a folder other than where your .IMG file is located. In order for fastboot to find the file you're trying to flash, you actually have to run your flash command from the folder your file is located...
So, cd\...\platform-tools and then flash
The simplest way I perform all of my operations for this:
I leave everything installed into it's default locations. I download tiamat's CWM image and place it into the platform-tools folder.
For Windows 7, I use Windows PowerShell.
For example: Open Start Menu > Type "power" to search, "Windows PowerShell" should show up. (For me, its default at the top - so I press enter to open it)
Once opened: I type this configuration EXACTLY as is: (Keys in <>)
Code:
cd C:\Pr <TAB><TAB> An <TAB> An <TAB> Pl <TAB><TAB> <ENTER>
This above brings me directly to:
C:\Program Files (x86)\Android\Android-sdk\Platform-tools\
Of course, this will be different depending upon your computer setup. I've nailed this routine to get to the path the quickest.
to use FASTBOOT (XOOM already in fastboot mode):
Code:
./fastboot flash recovery rec<TAB><ENTER>
This auto completes the filename as ./recovery-tiamat-r4c-xxxx.img
Of course, depending on how many files/folders you have, you may have to hit <TAB> multiple times. I have to do it 3 or 4 times to select the recovery image I want.
Auto-complete is a nice thing. "./" is added to command from the working directory.
williamthegoat said:
I finally got it. In command I needed to direct it to the platform tools folder and then it flashed just fine. I am now rooted. Now to learn about flashing ICS
Thanks for the responses and help guys[/QUOTE
Worked for me too!!! Thanks!!!
Click to expand...
Click to collapse
All right guys, I know I should search the forum, but I have no time now, this is what's going on: I tried to install CF3D's plugin on my Transformer, but it went darn bad, I can't get past Asus' "powered by tegra" screen, and I need this by tomorrow, for my class, how do I fiz this?! I unlocked it, running TWRP v 0.2.2.3., can't remeber my rom's name but it's a mod of the CleanRom, v3.1 that's all I know. I think I can fix this by re-flashing my rom, but I don't know if I can put files into my SD only with TWRP in my hands, if not is it a real brick?? Please, help me!!!
TheBloodEagle27 said:
All right guys, I know I should search the forum, but I have no time now, this is what's going on: I tried to install CF3D's plugin on my Transformer, but it went darn bad, I can't get past Asus' "powered by tegra" screen, and I need this by tomorrow, for my class, how do I fiz this?! I unlocked it, running TWRP v 0.2.2.3., can't remeber my rom's name but it's a mod of the CleanRom, v3.1 that's all I know. I think I can fix this by re-flashing my rom, but I don't know if I can put files into my SD only with TWRP in my hands, if not is it a real brick?? Please, help me!!!
Click to expand...
Click to collapse
I don't understand "if I can put files into my SD only with TWRP in my hands", you don't have a pc where you can copy the rom to your sdcard? BTW you should be using twrp 2.3.1.0.
I actually have my PC here with me,
but like I said im not sure I can connect it to the pc since it will be on recovery, you know, like an MTP or mass storage, can TWRP do that?
Sent from my R800i using xda app-developers app
TheBloodEagle27 said:
I actually have my PC here with me,
but like I said im not sure I can connect it to the pc since it will be on recovery, you know, like an MTP or mass storage, can TWRP do that?
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
You can't take the sdcard out and put it to your pc, copy the rom from pc to sdcard then put it back to your device? or you could use adb to push the file and hope adb is working on your pc.
ADB is working on my PC, but I don't see the TF700T icon under my computer
Sent from my R800i using xda app-developers app
TheBloodEagle27 said:
ADB is working on my PC, but I don't see the TF700T icon under my computer
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Try this,
Copy the rom.zip to the directory where your adb.exe is, then boot your device to twrp (home screen).
On your pc type
adb push rom.zip /Removable/MicroSD then hit enter (this copy the rom.zip from your pc to the root of your microsdcard.
If you see bunch of number and bytes and time then it's working.
buhohitr said:
Try this,
Copy the rom.zip to the directory where your adb.exe is, then boot your device to twrp (home screen).
On your pc type
adb push rom.zip /Removable/MicroSD then hit enter (this copy the rom.zip from your pc to the root of your microsdcard.
If you see bunch of number and bytes and time then it's working.
Click to expand...
Click to collapse
Alright, I'ts getting late, so I'll try it after school after all, I was thinking of using flashtool to flash the room through fastboot, that's how I used to do on my Xperia Play, but I don't know if the program works with asus' tablets... Anyway, thanks a lot man, for trying to help me and all, If it works I'll have a lot to owe u.
TheBloodEagle27 said:
Alright, I'ts getting late, so I'll try it after school after all, I was thinking of using flashtool to flash the room through fastboot, that's how I used to do on my Xperia Play, but I don't know if the program works with asus' tablets... Anyway, thanks a lot man, for trying to help me and all, If it works I'll have a lot to owe u.
Click to expand...
Click to collapse
EDIT: I must be doing something wrong. Where is the adb.exe location? I found one in the Asus Sync folder, is it that one? Second, where do I put this command? I know, in the command prompt, but which folder is it supposed to open?
TheBloodEagle27 said:
EDIT: I must be doing something wrong. Where is the adb.exe location? I found one in the Asus Sync folder, is it that one? Second, where do I put this command? I know, in the command prompt, but which folder is it supposed to open?
Click to expand...
Click to collapse
You don't move the adb.exe, where ever the adb command located, you need to open command prompt and navigate to the adb.exe folder. Asus Sync is located in C:\Program Files\ASUS\ASUS Sync and so is the adb.exe. so open command prompt and type:
cd\ hit enter, this bring you to root Ccomputer displayed C:\>
type:
cd Program Files\ASUS\ASUS Sync hit enter, you're now in the Asus sync folder (this is where your rom.zip should be in also)
computer should displayed:
C:\Program Files\ASUS\ASUS Sync>
now type
adb push rom.zip /Removable/MicroSD then hit enter (this copy the rom.zip from your pc to the root of your microsdcard.
buhohitr said:
You don't move the adb.exe, where ever the adb command located, you need to open command prompt and navigate to the adb.exe folder. Asus Sync is located in C:\Program Files\ASUS\ASUS Sync and so is the adb.exe. so open command prompt and type:
cd\ hit enter, this bring you to root Ccomputer displayed C:\>
type:
cd Program Files\ASUS\ASUS Sync hit enter, you're now in the Asus sync folder (this is where your rom.zip should be in also)
computer should displayed:
C:\Program Files\ASUS\ASUS Sync>
now type
adb push rom.zip /Removable/MicroSD then hit enter (this copy the rom.zip from your pc to the root of your microsdcard.
Click to expand...
Click to collapse
"system could not find specified directory" Heads up ¬¬...
Do you actually have a microSD card inserted into the tablet?
MartyHulskemper said:
Do you actually have a microSD card inserted into the tablet?
Click to expand...
Click to collapse
haha!! sorry for lol! if you don't have the sdcard, you could push it to internal sd.
buhohitr said:
haha!! sorry for lol! if you don't have the sdcard, you could push it to internal sd.
Click to expand...
Click to collapse
Ok then, how do I push ut to the internal SD?
TheBloodEagle27 said:
Ok then, how do I push ut to the internal SD?
Click to expand...
Click to collapse
adb push rom.zip /sdcard/
or
adb push rom.zip /storage/sdcard0/
Edit: Is it working for you yet??
buhohitr said:
adb push rom.zip /sdcard/
or
adb push rom.zip /storage/sdcard0/
Edit: Is it working for you yet??
Click to expand...
Click to collapse
I'm not sure, i'll try it out right now. I guess if it doesn't work it could be a problem with adb, is there any tutorial on how to set it up?
buhohitr said:
Try this,
Copy the rom.zip to the directory where your adb.exe is, then boot your device to twrp (home screen).
On your pc type
adb push rom.zip /Removable/MicroSD then hit enter (this copy the rom.zip from your pc to the root of your microsdcard.
If you see bunch of number and bytes and time then it's working.
Click to expand...
Click to collapse
I tried this, but got this message:
adb server is out of date. Killing...
ADB server didn't ACK
*failed to start daemon*
error:
what does that mean?
TheBloodEagle27 said:
I tried this, but got this message:
adb server is out of date. Killing...
ADB server didn't ACK
*failed to start daemon*
error:
what does that mean?
Click to expand...
Click to collapse
I thought that you already have adb working on your PC, but seems like you don't. You need to download Android SDK and once installed, you can use adb command from this SKD. Here is the link to how install Android SDK. It shouldn't take no more than 10 min. Just download and run the install, only select packages with the word "Android name" should be only 2. Once you done this, adb and fastboot should work fine. You also need Java, but like 99% ppl with a PC should already had Java installed.
http://forum.xda-developers.com/showthread.php?t=1616059
This tool is very important in rooting, recovery, flash stuff to your device. So I recommend you install this and get it working, it will save you a lot of time and headache in the future.
EDIT; If you think you have all the components already installed, you could download the adb/fastboot package here http://forum.xda-developers.com/attachment.php?attachmentid=1403567&d=1350299936 , unzip it to your C drive, you will have a folder called "Install recovery", in this folder there's adb and fastboot command, and then open cmd navigate to this folder and execute adb command line I provide previously see if that works.
buhohitr said:
I thought that you already have adb working on your PC, but seems like you don't. You need to download Android SDK and once installed, you can use adb command from this SKD. Here is the link to how install Android SDK. It shouldn't take no more than 10 min. Just download and run the install, only select packages with the word "Android name" should be only 2. Once you done this, adb and fastboot should work fine. You also need Java, but like 99% ppl with a PC should already had Java installed.
http://forum.xda-developers.com/showthread.php?t=1616059
This tool is very important in rooting, recovery, flash stuff to your device. So I recommend you install this and get it working, it will save you a lot of time and headache in the future.
EDIT; If you think you have all the components already installed, you could download the adb/fastboot package here http://forum.xda-developers.com/attachment.php?attachmentid=1403567&d=1350299936 , unzip it to your C drive, you will have a folder called "Install recovery", in this folder there's adb and fastboot command, and then open cmd navigate to this folder and execute adb command line I provide previously see if that works.
Click to expand...
Click to collapse
All there is in here is a .cmd file, no adb or nothing, I tried to use the command line you provided me, but all I get is:
adb server is out of date. Killing...
*daemon started succesfully*
Protocol Failure
Edit: I also downloaded the Android SDK Manager and downloaded the two tools
TheBloodEagle27 said:
All there is in here is a .cmd file, no adb or nothing, I tried to use the command line you provided me, but all I get is:
adb server is out of date. Killing...
*daemon started succesfully*
Protocol Failure
Edit: I also downloaded the Android SDK Manager and downloaded the two tools
Click to expand...
Click to collapse
If you go here http://forum.xda-developers.com/atta...7&d=1350299936 download the zip file then unzip to your drive. In this new folder you should see adb.exe and fastboot.exe and a few dll files. Do you see them??? Make sure your anti-virus doesn't strip the files.
buhohitr said:
If you go here http://forum.xda-developers.com/atta...7&d=1350299936 download the zip file then unzip to your drive. In this new folder you should see adb.exe and fastboot.exe and a few dll files. Do you see them??? Make sure your anti-virus doesn't strip the files.
Click to expand...
Click to collapse
Oh man, this sucks, it says 404 page not found, didn't you cpy the wrong link?
Description
After always having to search for the latest versions of Android's ADB and Fastboot tools instead of downloading the whole Android SDK for just 1 mb in a few files, I decided to make my own MSI installer using the latest versions of ADB and Fastboot.
You can install it wherever you want and it will work from any path in the command prompt. The installer will append the installation folder location to the system PATH variable, allowing you to run ADB or Fastboot without you having to change the command prompt path to where they are installed.
This installer is 32-bit and 64-bit compatible.
Usage
The default installation path is C:\ADB so you can easily add your flashable files in there.
After installing Android ADB Fastboot you can open a command prompt and type adb or fastboot commands right away, you don't need to change paths. Keep in mind that you need admin privileges, though.
To open a command prompt with administrator rights on Windows 8, just right click on the bottom left corner of the screen or use the Win+X shortcut and then click on Command Prompt (Admin).
Click to expand...
Click to collapse
If you have Windows 7 or Vista, the quickest way to do it is to type CMD on the Start Menu search box and press Ctrl+Shift+Enter instead of just pressing Enter.
Click to expand...
Click to collapse
Requisites
You need to have ADB Debugging under Developer Options on your device. You also need the drivers for every device you want to use with ADB installed and working.
You can type adb devices on a command prompt. If your device is listed, the drivers are working and good to go for ADB and Fastboot use.
Click to expand...
Click to collapse
Download
I will always check the ADB version whenever a new Android SDK is released and I will update my installer when needed.
The download link and screenshots are on my website.
http://rubenalamina.mx/custom-installers/android-adb-fastboot/
Latest version of the installer: 1.5 (ADB 1.0.36) updated on 2016.09.21
Thanks mate, it really help people with lacks internet connection like mine
Sent from my WT19i using xda app-developers app
Installer updated to version 1.2 with the new ADB and Fastboot included in Android SDK 23.0.2.
Installer updated to version 1.3 based on the Android SDK 24.0.2.
no matter what i do it stills says ABD is not reconizedf as an internal or external command. i even downloaded the whole stinking dev kit to make sure nothing missing in these little installers. made sure that a path was put still dose NOT work :/. and yes im running cmd prompt as adminastrator.
Nightmare-Rex420 said:
no matter what i do it stills says ABD is not reconizedf as an internal or external command. i even downloaded the whole stinking dev kit to make sure nothing missing in these little installers. made sure that a path was put still dose NOT work :/. and yes im running cmd prompt as adminastrator.
Click to expand...
Click to collapse
Have you tried running it from the C:\ADB path just in case? Maybe try PowerShell instead of the command prompt. I don't really know what else you can try if even the SDK is not working for you.
ajua said:
Have you tried running it from the C:\ADB path just in case? Maybe try PowerShell instead of the command prompt. I don't really know what else you can try if even the SDK is not working for you.
Click to expand...
Click to collapse
yes ive been trying both Shift open command prompt here, and aslso left click run as adminastrator and CD c:/abd both still says abd not reconized.
Nightmare-Rex420 said:
yes ive been trying both Shift open command prompt here, and aslso left click run as adminastrator and CD c:/abd both still says abd not reconized.
Click to expand...
Click to collapse
Try using PowerShell. Also, see if you are able to run the ADB that comes with the SDK but run it from the folder where it is located.