Database Info

stuck on coredroid boot screen

I have tried to flash to the coredroid and it will boot up to the animated boot screen but will not go any further than that. i have tried to flash it several times i am using CWM 3.0.2.5 i have performed a full wipe as well. what am i doing wrong?

What you are doing wrong is not using the search feature on the forum before posting.

Maybe i did but still couldnt find the answer. Im not new to forums. Ivee tried reflashing it several times as the coredoid post says and that didnt work so what am i to do now
Sent from my Inspire 4G using XDA App

First....update Clockwork
then...wipe data/factory reset (in Recovery)
then...wipe cache partition
then...flash it once more and if it does not work try re downloading the ROM because there is a possibility some important files are corrupted...

ThEiiNoCeNT said:
First....update Clockwork
then...wipe data/factory reset (in Recovery)
then...wipe cache partition
then...flash it once more and if it does not work try re downloading the ROM because there is a possibility some important files are corrupted...
Click to expand...
Click to collapse
All of which was available by doing a search ^
You can also add try a different rom to the above list.

I have done all on that atleast twice. I had just redownloaded the rom last night
Sent from my Inspire 4G using XDA App

this is a ext3/4 rom Is your sd card formated properly? If its version 6.6 ( the latest) try using version 6.5 first as this will format the sd card for you.. back up your sd card first just to be sure you don't lose your information. in CWM mount the sd card and copy to computer.. Hope this helps.

Already stated previously but worth another try. Install another ROM, maybe one that is almost stock. Then try Coredroid again.
I also suggest you ask in the Coredroid forum. Good luck.

Ok thanks ill see what i can find out over there
Sent from my Inspire 4G using XDA App

are you flashing through rom manager or cwm ?

I have the same issue, i used rom manager, did the wipe.. and its just stuck on the animation loop.
If anyone could help, it would be appriciated.
Thanks

Found it.
Thanks

Got it going, I did a recovery, then updated with coredroid v7.0.. Works very well.. no problems here.
By the way, I'm digging the new layout.
Sent by My Rooted Core Droid v7.0

[Q] MIUI restart loop

I just flashed MIUI (latest version) and my DS is restarting repeatedly.I was at stock ROM before and i had factory reset it before I flash MIUI.
Anyone knows what happened?
EDIT: sorry for spamming...i got to CWM and i format again and it worked
ps. greate job with the ROM

are you using clockwork recovery?

barkermichaelj said:
are you using clockwork recovery?
Click to expand...
Click to collapse
would recommend that you install EXT4 recovery rather than CWM
simply download file onto SD
boot into CWM
and flash ZIP file

CWM works just fine, you just need to make sure you wipe everything before flashing new ROM, ie data, cache, dalvik cache, etc, then all is good

Just wanted to add that I to ended up in a bootloop, and I've had miui 1.8.5 installed since it came. It stopped after about 10 reboots. Dunno know what's up, had a lot of FC's as well these last few days.
Looking forward to tomorrow for am update! Cheers!
Sent from my HTC Desire S using XDA App

I also had some problems with 1.8.5 version (random reboots). I am still using the 1.7.29 version that is working great. Only theme chooser FC's.

[Q] g2x not booting fully

Hi.
today i flashed cm7.1 to my g2x, and later on i flashed the trinity kernel. when i flashed the trinity kernel, my g2x it wont boot to cm7, instead it will stay in a black screen. however, i can get into clockworld mod recovery. Any help??
Thanks.

did i actually brick it???
im not sure i am new to this phone...

Did you nvflash cwm? If so, Reflash cm7 and don't flash the new kernel
Sent from my Galaxy Nexus using xda premium

kwes1020 said:
Did you nvflash cwm? If so, Reflash cm7 and don't flash the new kernel
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
thanks for the reply.
I did use nvflash. should i wipe data and cache before reinstalling cm7?
thanks

yes, wipe data, cache, dalvic, and do a factory reset (which I think does the first two, but most everything sys to also do a factory reset from CWM)
P.s. Damn, how many other night owls are there on this forum?

thanks guys the phone works now after reinstalling and wiping.

honestly the best rom on the g2x is eaglebloodv2.5 based of cyanogenmod 7.1 with the trinity 15 uc/uv kernal. dont get me wrong i love cm but i can overclock to 1.5 per core with -150mv stable

[Q] Clean Rom 2.5 9/26 build. Stuck on bootscreen

Hi, this is my first post ever on XDA so sorry if im doing it wrong or if its in the wrong spot . anyways i am running stock and am on rooted & unlocked vzw gs3 . I downloaded and installed Scotty's Clean Rom 2.5 which was released just last week. I wiped/factory reset/ formatted everything and the rom seems to install fine, but then when i reboot it stays on the sgs3 boot screen forever? I dont know why it is not working. Ive tried about three times. Thanks.

slegger04 said:
Hi, this is my first post ever on XDA so sorry if im doing it wrong or if its in the wrong spot . anyways i am running stock and am on rooted & unlocked vzw gs3 . I downloaded and installed Scotty's Clean Rom 2.5 which was released just last week. I wiped/factory reset/ formatted everything and the rom seems to install fine, but then when i reboot it stays on the sgs3 boot screen forever? I dont know why it is not working. Ive tried about three times. Thanks.
Click to expand...
Click to collapse
I had the same problem with 2.1 and 2.5 on my phone. For some reason, the flash does not work on my phone the first time. both times I had to pull the battery when I got stuck on the boot screen then boot into recovery, re-wipe, fix permissions and reinstall. It always worked for me on the second try.
Good luck.

slegger04 said:
Hi, this is my first post ever on XDA so sorry if im doing it wrong or if its in the wrong spot . anyways i am running stock and am on rooted & unlocked vzw gs3 . I downloaded and installed Scotty's Clean Rom 2.5 which was released just last week. I wiped/factory reset/ formatted everything and the rom seems to install fine, but then when i reboot it stays on the sgs3 boot screen forever? I dont know why it is not working. Ive tried about three times. Thanks.
Click to expand...
Click to collapse
This happened to me once. Try to re-root the phone again then flash it.

Did you do a dalvick cache wipe too? Also were you flashing a kernel with 2.5? Are you coming from stock or a custom rom too? And if you are coming from a custom rom does it use a custom kernel? You should also check the md5 of the rom and verify it didnt get corrupt on download/transfer.
Sent from my SCH-I535 using xda app-developers app

RE
x714x said:
Did you do a dalvick cache wipe too? Also were you flashing a kernel with 2.5? Are you coming from stock or a custom rom too? And if you are coming from a custom rom does it use a custom kernel? You should also check the md5 of the rom and verify it didnt get corrupt on download/transfer.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yes i wiped the dalvick, fixed permissions, formatted just about everything and factory reset, when that did not work I formatted and wiped everything before and after the flash. still no luck. I was not flashing a kernel, (to be honest im not even sure how to do that) and im coming from a stock rooted rom that i got when i first rooted with odin. I checked the md5 and everything matched up too.

How!?
rpuleo said:
This happened to me once. Try to re-root the phone again then flash it.
Click to expand...
Click to collapse
How do you re root? would i have to use odin to flash the rooted rom again?

The process of how you flashed sounds right.
When you say it's stuck forever, how much time did you give the phone to reboot. Sometimes with a new rom, it may take 5 min or longer for reboot to finish. If you haven't already, just walk away for 5-10 min before checking it.
Sent from a SYNERGIZED GalaxySIII

Clean rom wouldn't install for me on my phone... Weird stuff happened on the screen during boot animation and then would vibrate like crazy and go into boot loop... I came to realize that it was the kernel and I flashed lean kernel and it worked perfectly... I think these roms act differently on everyone's phones and sometimes there's no rhyme or reason to why things work for some people and not others... Just my. 02 cents
Sent from my SCH-I535 using xda app-developers app

[Q] After Flushing PA Jelly Bean Rom It Keep showing PA boot screen

Hi,
I have AT&T Motorola Atrix 2 MB-865 , i was on official ICS after root unlock I flushed pa_edison-3.69-20130729-nokex.zip rom to my atrix 2, using http://forum.xda-developers.com/showthread.php?t=2050705
i did factory reset, data format system, format cache and etc before flushing that ROM after successful flush , I rebooted , after reboot it keep stuck (does't not hang just stuck) on paranoid boot screen, i tried to flush again but same result in addition i want to say i flushed only rom , no gapps, , now i am again on ics_edison using RDS Lite ,Please any one tell me where i am wrong
Thanks in advance.

cheeta123 said:
Hi,
I have AT&T Motorola Atrix 2 MB-865 , i was on official ICS after root unlock I flushed pa_edison-3.69-20130729-nokex.zip rom to my atrix 2, using http://forum.xda-developers.com/showthread.php?t=2050705
i did factory reset, data format system, format cache and etc before flushing that ROM after successful flush , I rebooted , after reboot it keep stuck (does't not hang just stuck) on paranoid boot screen, i tried to flush again but same result in addition i want to say i flushed only rom , no gapps, , now i am again on ics_edison using RDS Lite ,Please any one tell me where i am wrong
Thanks in advance.
Click to expand...
Click to collapse
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app

nikhJ said:
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
he's is in a habit of writing 'flush' in place of 'flash' (see his other posts)
sent from my A2 running ÑÜMÅ3.0
$ÇÏÊÑÇÈ is the only TRUTH

Re
nikhJ said:
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
I used Atrix2BootStrap.apk which seem like CWM based, there was no option 1st system or second system, it was like standard flashing(means normally we flash using Clock world recovery so no 1s or seccond system option appeared).

cheeta123 said:
I used Atrix2BootStrap.apk which seem like CWM based, there was no option 1st system or second system, it was like standard flashing(means normally we flash using Clock world recovery so no 1s or seccond system option appeared).
Click to expand...
Click to collapse
i think this rom can be install via BMM only... my friend has do like what you do before..... the only you can do is FXZ to stock,root,and then go to play store, install BMM 0.3..... dont install bootstrap.apk again after installing BMM and you will be fine...

I seem to have a similar issue.
First of all although this is my first post on XDA I'm not new to flashing and using Custom Roms infact I have been using CM 10.1 versions switching back and forth between 4.1.2 when I run into trouble.
I decided to give PA a shot and seem to have run into a wall. I flashed PA nokex on system 3 (which previously had CM10.1 - JBX 0.8.1(kernel)).
Before flashing PA on it I destroyed and recreated system, data and cache partitions so I didn't see the need to do wipes on them again. Nevertheless I did dod wipes. Flashed PA nokex, Gapps, wiped dlavik cache and rebooted. (Using BMM ofcourse)
I am stuck at a black screen with the red LED. I would really like to sample PA so any help would be really appreciated.

blazebud350 said:
I seem to have a similar issue.
First of all although this is my first post on XDA I'm not new to flashing and using Custom Roms infact I have been using CM 10.1 versions switching back and forth between 4.1.2 when I run into trouble.
I decided to give PA a shot and seem to have run into a wall. I flashed PA nokex on system 3 (which previously had CM10.1 - JBX 0.8.1(kernel)).
Before flashing PA on it I destroyed and recreated system, data and cache partitions so I didn't see the need to do wipes on them again. Nevertheless I did dod wipes. Flashed PA nokex, Gapps, wiped dlavik cache and rebooted. (Using BMM ofcourse)
I am stuck at a black screen with the red LED. I would really like to sample PA so any help would be really appreciated.
Click to expand...
Click to collapse
i think PA non kexec is for ICS base only!
¢@®bøÑ///JBX

Super_Commando said:
i think PA non kexec is for ICS base only!
¢@®bøÑ///JBX
Click to expand...
Click to collapse
Yeah. I flashed the kexec version and it booted up fine... Thank you.