Dear friends and mod thanks for such a lovely site. it really gives a valuable info about cheap and best tabs.
my problem is about the corruped firmware.
I have a chinese tablet PC10A9.
following is the link
httpwwwnetaccecom_d271305707htm.
(as i m unable to send link in the thread due to post limitaions)
you can also check it
netaccedotcom
and then look for the model no. i mentioned.
by mistake i switched off the tablet while resetting it. now its firmware got corrupted and i dont know how to set this right. now when even i start it only a blank screen comes. it does not even go to animation screen. please guide me how to set this right. if there is any more info you need please inform me.
thanks in advance.
brad smith
Related
Hello,
This is my first POST pls don't eat me
I'm in need of the Eten P300 rom update in which is already posted in the http://www.etencorp.com/Support/download.php [press on software section Windows 2000/XP ROM Image 155_0050 (w/ voice command) English(Worldwide) ] thus I'm not able to register for no reason, I purchased from ebay and it seams that the IMEI is registered to the previous owner, I tried to trace the owner to get his username and pass or at least to drop his account but without avail.
My phone is dead. I can only enter the bootloader because I tried to flash it with different rom
Plz can someone shade me to the direct way to get the rom files or at least a place to download it from.
Thank you in advance.
Why don't you just email them and say you are the new owner and get it registered correctly?
I tried many times, I'm really fed up. A dead device isn't easy espcially when u get back to Symbian envirement.
I know this forum is deducated for the HTC devices, but my question remains to whom they already have the rom, or to whom they know from where to download it.
Plz ppl help me here.
Thank you.
Get P300 rom here:
http://www.eten-users.net/topic105
hi guys
wkere i can find p300 neo flash rom??? link not working. help me
thanks a lot
I HAD been using N5 with the first preview image of Android L released by Google. Today, I installed 'UnleashTheGoogle' api from AndroidPolice and the phone immediately rebooted. The problem is that now the phone is stuck in the continuous booting process and not able to recover from it. What shall I do now????
AndroidPolice LINK
I completely switched off the phone and fired it back again, but still same problem. Please help me guys..:cyclops:
p.s. i am a nOOb when it comes to flashing and all..so please excuse my lack of knowledge and explain in the layman's terms
Firstly, help people help you. A thread in this sub-forum can be assumed to be asking for info or help for the N5. "Need help with N5" isn't informative and a lot of people will simply ignore the thread.
Second, don't install apps without vetting them. A brief look at the comments should have clued you in to what would happen if you tried to install the apk while running L. I suggest you read the comments. Another person in your situation was able to recover.
Thanks for your response mate..I have flashed L back on the phone..and yeah..I should have read the comments first
Out of a sudden, a black thin vertical line appeared on my phone. Originally, it disappeared but then it appeared again. Restarted my phone, took the battery out blah blah, it did not really work.
I have my phone since late October, so it is not that new , but not too old to start getting problems like that! Never dropped water or anything, it wears a screen protector and is in a case all the time!
Help please! I really cannot afford a new phone at the moment!
Hi, thank you for using XDA Assist. You're not going to like this, but it's most likely a hardware issue. But you never gave any information on what device you have. Flashing the stock firmware might help you and if I had your device info I could point you in the right direction to try that.
jd1639 said:
Hi, thank you for using XDA Assist. You're not going to like this, but it's most likely a hardware issue. But you never gave any information on what device you have. Flashing the stock firmware might help you and if I had your device info I could point you in the right direction to try that.
Click to expand...
Click to collapse
Hi there!
My device is Doogee Dagger DG550 and it came pre-installed with Android KK 4.4.2 (I have rooted it and installed many things since then).
Is it gonna get worse? Can the stock firmware fix it? ((((((
There is not a lot of information about your device on XDA. But maybe someone in this thread can help you, http://forum.xda-developers.com/showthread.php?t=2712333&page=47
The point is that it is a rather screen problem than a Doogee problem (I think).
So any solutions for getting rid of a black line on screens would help (from Samsung users, HTC users, any users).
It's most likely a hardware issue and stock firmware is not going to help. But I'd a least try flashing the stock firmware. See the link I gave you to see if anyone there knows how to do that on your device. Because I can't find anything on XDA which will tell you how help you. Most likely you are going to have to get the screen replaced.
Phone: Asus Zenfone 2
Model: ZE551ML
CPU: Quad-core 2.3Ghz
RAM: 4GB
Storage: 32Gb
Root: Used QuickRoot to gain root privileges
Bootloader: Not unlocked, at least not intentionally...
Hello dear XDA members,
I am posting this because I have quite unusual problem with my Recovery Mode.
Like everybody else here I rooted my phone to get rid of the pre-installed cra.. I mean BloatAware. After the root everything was successful and I managed to delete all the apps that I am not going to use and that I don't need. I didn't delete any of the key modules except S-KEY Cleaner if that is of some relevance.
So how all this happened?
I was looking into flashing ROM called BlissPop because Lolipop has a RAM leak and I find it quite annoying. So I started doing the steps...
I think my recovery stopped working after I installed TWRP app from Google Play store and tried to make a recovery.
I prepared all the zip folders on my phone and turned off my phone. I used Power key + Vol UP to get to the menu.
There are few of the lines missing like "Secure_Boot - ?" and "Signing - ?" which doesnt seem to be the case when I looked at other threads.
When I press power button to select Recovery Mode it just reboots and pops up the same menu. No error messages or pictures on the screen.
Dont forget that I didnt NOT unlock bootloader.
So.. Does anybody knows what is the problem and what should I do? Because I want that Blisspop so bad. To add to that I am a full time traveler at the moment and I cant afford to brick my phone as I am 35.000km away from home.
If anybody has the time and energy to explain me step by step process how to do all that + how to flash BlissPop ROM and Gapps I would sincerely appreciate it.
If I missed any relevant detail please ask and Ill try my best to answer as accurately as possible.
Thank you so much for your time.
P.S. I cant post outside link, but if you want the picture Ill send it by phone, mail, or whatever.
Hi
Welcome to xda.
Thanks for being so thorough and descriptive in your question. That makes it much easier for people to provide help.
Your devices Q&A is located here > Asus ZenFone 2 > ZenFone 2 Q&A, Help & Troubleshooting.
If you don't find any information regarding your problem then feel free to post your question here [GENERAL HELP] Post Your Questions Here Instead of Making a New Thread or make a new thread in Q&A.
Hello again guys!
I think I am on the right track. I did my homework and read a lot of threads about bootloaders and recoveries. I will test it out soon and tell you guys if I managed to fix it and what did it take.
Wish me luck!
civelja5 said:
Hello again guys!
I think I am on the right track. I did my homework and read a lot of threads about bootloaders and recoveries. I will test it out soon and tell you guys if I managed to fix it and what did it take.
Wish me luck!
Click to expand...
Click to collapse
Well done mate Good to see you found your way.
As this is resolved I'll have to close this thread now. Enjoy the site. :good:
Hello, I bought my daughter the Gakaxy Tab A, 8in, SM - T350, I tried to root it, like a moron, usin that odin i did what it said and used the CF-Auto-Root-gt58wifi-gt58wifixx-smt350 for the PDF. It just sits at the samsung screen on reboot, i even tried using the PDF sm-t350-stock-recovery still nothing, if you can help Thank you, and I will never try this again Also
Also I WILL Pay $20.00USD to any that fixes my issue, Paypal, or any means suited for u
sorry, just need this fixed befire christmas
Hi,
Thank you for using XDA-ASSIST. We all are here to help. If I were you i would install Samsung Smart Switch tool for your Windows or Mac http://samsungsmartswitch.org/ or you can always download your firmware from Samsung website http://www.sammobile.com/firmwares/database/SM-T350/
Good luck and Merry Christmas. Hope you able to fix it, if not I'll find another solution for you. Either way work or not please let us know so we can close this thread if solved your issue.
Assist-Team
ted77usa
Thx for reply
First of all thank you for your reply
when I run smart swutch setup i get the ordinal 12404 could no be located in the dynamic link library mfc90u.dll
CThe other link doesnt have any links to a USA site, so trying Austrailla and canada, Ill let u know what happens
My Whole Party Number is SM-T350NZAAXAR
Sean and thx again