hello everybody,
i have bricked my nexus s after a bad update, i tried the JIG USB but it doesn't work, same thing for UNBRICKABLE RESSECTOR on linux system.
there is no signal when i try to turn it on, even when i connect it to computer it is not recognized...
someone can help me?
sorry for my english..
thanks
Have you tried to get into recovery, or nothing happens?? Have you tried to remove the battery for a few minutes and put it back?
Ps: if you are Italian you can write in Italian, we understand each other better
Try getting into recovery my holding volume up and powerbutton. From there go into recovery (brings you into stock recovery) and try to get yourself into unmount SD card so you can plug your phone via USB to your computer. next root your phone (go into nexusshacks.com and select the newest page). After rooting just do a clean install of your rom and it should work. MAKE SURE YOU RESEARCH ALL OF THIS. ALL OF THIS THAT IM SAYING!!
Related
Hello everyone! I state that is a month that I bought a LG Optimus 3D Gaming Edition and I have already made many changes: root, recovery, rom modified, etc. ... The other day, after having installed the rom Cyanogenmd, I was presented with a problem, my terminal is not cycled more (I was calm at other times because I had already sbrikkare) ......... as usual ...... I turned on the pc plugged it into the terminal in debug mode ... I noticed that the connection between the terminal and the PC was not stable (ie it connected and disconnected at infinity)! Later I also discovered that the terminal is not recharged and even now no longer know what to do! Please help me I'm desperate!
is there anyone?
fabersantucci said:
is there anyone?
Click to expand...
Click to collapse
Gaming edition?
Sent from my LG-P925 using XDA Premium App
Did you brick your phone dose it turn on? dose it just loop in download mode? volume down and power. If it loops in download mode then you probly hard bricked it i did that and had to take it back no way to fix it.
Thank you. Anyway I think I hard bricked the LG, why not start their own, even in download mode.The last choice is to take it in assistance?
Sorry for my bad English, I'm using google translator !
If you go to the thrill 4g forum and go to general and then the thread free assistance a guy there can try to help you if he can then youll have to tak it back if you can.
Did you format the SD card when you were on CM7 ?
omgomg said:
Did you format the SD card when you were on CM7 ?
Click to expand...
Click to collapse
Ya i did that and hard brickdd my phone.
Hi all,
I too have done the same bull****. I formatted the SD and now the phone will not start: tried in recovery, in emergency, in normal mode, unfortunately there's no way to restart it.
Could you make a copy of your SD in RAW mode and try to give me the backup?
I extract the contents in my SD to try to start the phone.
Did you think that's possible?
Thanks
Just putt in your data cabel ond whait for the connecting sound. maybe putt itt in and out several times and the computer shall install the usb driver then run lg recovery tool. good luck sorry for my bad inglish
shtchalle said:
Just putt in your data cabel ond whait for the connecting sound. maybe putt itt in and out several times and the computer shall install the usb driver then run lg recovery tool. good luck sorry for my bad inglish
Click to expand...
Click to collapse
Thanks for reply.
I tried a lot of time on a lot of pc (windows xp, windows 7 32bit, windows 7 64 bit= without any fix.
I think the problem is due to the fact that the CM7 installs recovery, emergency mode, normal boot on SDCARD.
It's impossible to start the phone in any of the three options.
Just connect the smartphone on PC, the USB port continues to connect / disconnect (every second).
Probably with a raw image of the iso, maybe I can fix the issue, hoping that the required data are read from external memory and not form internal memory, also I have trouble: (
My phone was exactly like you're. Some how i started the phone in recovery mode butt screen is still black just a sound in computer and after several attempt computer install drivers and LG recovery tool worked. Hard to explain in words. Hope you fix it.
So, i had my phone with the MIUI rom but i wasn't really liking because it was a little slow, so i flashed Kyrillos 9.5
After i flashed Kyrillos 9.5 i start having some battery issues, i was thinking that it was some problem of the ROM so i went away to flash another ROM, but ODIN didn't detected my phone, i upgraded the drivers and nothing.
My last try was to flash a rom by the update.zip method.
It didn't ended well and now i can't use the phone at all, it just stucks at bootloading.
If someone can help me to get my phone working again it would really help because i can't even use it.
PS: Sorry for my english.
Try to write another ROM on your sdcard(for example CM7a8.1) and install it from recovery
DoR2 said:
Try to write another ROM on your sdcard(for example CM7a8.1) and install it from recovery
Click to expand...
Click to collapse
Yeah, take your Micro SD out and put another update.zip on it. Then go into recovery hold Volume Up+Volume Down+Home and Power. Flash ROM and hopefully it'll work
Trying changing USB ports or rebooting your pc
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!
follow bscrazes advice, try other usb ports and then reboot your pc and try again, if that doesnt work still;
enter recoverymode (hold down both volume keys, power button and center button) then go to mounts and storage and choose usb mass storage device.
then plug it into your computer, it should just recognise it as a mass storage device, from here open folders and place a good update zip on it. suggested cm7a8.1
then apply update from zip.
this should work,
if you get errors doing this reply here and we shall try help
you need to re-install the driver....
J.Purungrit said:
you need to re-install the driver....
Click to expand...
Click to collapse
I agree
Sent from my GT-I5800 using xda premium
Though I'm giving the advice a bit late try the following
first uninstall all samsung stuff (even drivers) from your computer.
Then as Jason-EX said install usb drivers for samsung mobile
If you are unable to get to recovery try the following:
When the phone is powered off press power,volume down and home button simultaneously (now you should directly enter download mode)
connect it to computer now odin will recognise your phone
Flash some stable rom or kernel
I had the same problem once and this procedure worked
For the driver - http://drivers.softpedia.com/get/MOBILES/Samsung/SAMSUNG-USB-Driver-1480.shtml (if at all windows doesn't download it)
if u hav all the drivers installed and still ur phone cant b detected in download mode ...den u gotta usb problm buddy...try changing the usb cable or try in different ports ...that might work.
I have a TF101 SN60 - SBK1. I was trying today to root it to instal a stupid USB modem app and i bricked it.
Right now it is in recovery mode and i can`t get it out. Tried all the combination of the buttons and still doesn`t work.
I tried to reput the stock rom from Asus and i had success(2 times) but was still in recovery mode and after that i tried once more and it failled.. now i have 7 " !!!!! phone update failled !!!!" and i am very pissed and mad as i do not know what to do no more. I wasted 5 hours today trying to do something to it but i can`t no more. Please help me with some tips or maybe help me put it back to it`s normal state. Thank you.
Which recovery and version do you have installed, and how did you install it?
almost same issue
I have cwm 6 something and it wont recognize the sd or paths my laptop wont detect it have every method downloaded nothing what can i do about this?? Bricked for a long time !!
sriv2102 said:
I have cwm 6 something and it wont recognize the sd or paths my laptop wont detect it have every method downloaded nothing what can i do about this?? Bricked for a long time !!
Click to expand...
Click to collapse
Have you tried APX mode?
I would try another PC, or get a new charging cable. It is possible for the USB cable to charge but not work for USB. Happened to me.
hello,
I hope someone can help me with my AT&T LG Optimus Pro G phone, which I have royally screwed up.
I was experimenting with the cyogen mod and after installation I installed the freegee app and once the cwm recovery was installed, I decided to go into the recovery by holding down up volume and power button.
Once I was in recovery for CWM i couldn't exit out, and the phone constantly booted into recovery after every reboot, even if i took out the battery, and powered it on.
I tried reflashing the cynogen mod through the sd card, and even though I would get success message the phone would still reboot into the cwm recovery.
I started doing research on the internet and i found file exitrecovery.zip that could be used to possibly get the phone out of the cwm recovery.
After installing exitrecovery.zip, I rebooted the phone, and now I have complete black screen. There are no light, no hints the phone is even turning on, and I can't get into recovery( or at least I can't tell). The only thing now is that when i connect the phone to the computer the window tries to install drivers for the device, and eventually prompts to insert a CD for LG drivers. I already have LGUnitedMobileDriver v.3.10.1 connection drivers installed from their website.
Please help, I am really stuck here..... and have no clue what to do. I am fairly new with rooting and modding, and I am extremely miserable.
The phone is still under warranty from LG. Anyone if all else fails, and since the phone has no screen or lights, whether they would replace it?
Attaching the exitrecovery.zip that I used.
sobbing....
babaghanush said:
hello,
I hope someone can help me with my AT&T LG Optimus Pro G phone, which I have royally screwed up.
I was experimenting with the cyogen mod and after installation I installed the freegee app and once the cwm recovery was installed, I decided to go into the recovery by holding down up volume and power button.
Once I was in recovery for CWM i couldn't exit out, and the phone constantly booted into recovery after every reboot, even if i took out the battery, and powered it on.
I tried reflashing the cynogen mod through the sd card, and even though I would get success message the phone would still reboot into the cwm recovery.
I started doing research on the internet and i found file exitrecovery.zip that could be used to possibly get the phone out of the cwm recovery.
After installing exitrecovery.zip, I rebooted the phone, and now I have complete black screen. There are no light, no hints the phone is even turning on, and I can't get into recovery( or at least I can't tell). The only thing now is that when i connect the phone to the computer the window tries to install drivers for the device, and eventually prompts to insert a CD for LG drivers. I already have LGUnitedMobileDriver v.3.10.1 connection drivers installed from their website.
Please help, I am really stuck here..... and have no clue what to do. I am fairly new with rooting and modding, and I am extremely miserable.
The phone is still under warranty from LG. Anyone if all else fails, and since the phone has no screen or lights, whether they would replace it?
Attaching the exitrecovery.zip that I used.
sobbing....
Click to expand...
Click to collapse
Find flow ROM with expansion .exe and try it to sew from a computer.
could you further elaborate please
lykosha said:
Find flow ROM with expansion .exe and try it to sew from a computer.
Click to expand...
Click to collapse
hi, thanks for your reply. Again I very much new to the rooting and android OS tinkering, and nowhere close to an experienced user.
I tried to use google with your information in regards to how to use flow ROM with expansion.exe, but did not get any leads.
I would appreciate if you could elaborate more on this process.
When my phone is connect to the computer via usb is is constantly trying to install drivers. I had already installed LG usb connection drivers in the past and it was successful. It almost seems it tries to install driver yet fails after receiving no input from the phone, and then request LG CD with drivers.
babaghanush said:
hi, thanks for your reply. Again I very much new to the rooting and android OS tinkering, and nowhere close to an experienced user.
I tried to use google with your information in regards to how to use flow ROM with expansion.exe, but did not get any leads.
I would appreciate if you could elaborate more on this process.
When my phone is connect to the computer via usb is is constantly trying to install drivers. I had already installed LG usb connection drivers in the past and it was successful. It almost seems it tries to install driver yet fails after receiving no input from the phone, and then request LG CD with drivers.
Click to expand...
Click to collapse
Try to find driver on the web-site of producer. Set them. Overload a vehicle in Bootloader. In the controller of devices on компе must be determined your device. Then on a computer start sewing - .EXE.
Did you get this problem resolved? I have the exact problem with the exact phone!!!
thank you very much
Hi u all!
First of all thank you for your time and sorry for my english, I speak spanish.
I have a nexus s i9023. I was using CyanogenMod 11 experimental 24042014.
I was having many problems and decided to downgrade to the stable version 10.1.2
It downloaded ok, installed all the updates, rebooted and then got stuck in the logo screen when booting.
The problem is that my nexus s has a broken the power button, it doesn't work.
As for right now the olny thing I can do is to enter the bootloader screen, but cant move throgh the options with the volume keys, it's like its stuck.
If I plug in the device when in the bootloader (fastboot mode) screen my PC doesn't recognice it, I search in the device manager but it doesn't appear.
If it helps when I plug in the battery the phone starts on in it's on.
Please, any help is appreciated.
Im really sad because I love my nexus.
Thank you!!!
Same here. Any help for us would be great. Thanks.
shd128 said:
Hi u all!
First of all thank you for your time and sorry for my english, I speak spanish.
I have a nexus s i9023. I was using CyanogenMod 11 experimental 24042014.
I was having many problems and decided to downgrade to the stable version 10.1.2
It downloaded ok, installed all the updates, rebooted and then got stuck in the logo screen when booting.
The problem is that my nexus s has a broken the power button, it doesn't work.
As for right now the olny thing I can do is to enter the bootloader screen, but cant move throgh the options with the volume keys, it's like its stuck.
If I plug in the device when in the bootloader (fastboot mode) screen my PC doesn't recognice it, I search in the device manager but it doesn't appear.
If it helps when I plug in the battery the phone starts on in it's on.
Please, any help is appreciated.
Im really sad because I love my nexus.
Thank you!!!
Click to expand...
Click to collapse
kijp15 said:
Same here. Any help for us would be great. Thanks.
Click to expand...
Click to collapse
Seems like a driver issue. Can you try installing the drivers in a different system?
If it goes well, then use install cwm touch recovery from fastboot. You can take backup and flash new ROMs after that.
Try Nexus Root Toolkit to install drivers if you don't have access to a different system.
smit.sanghavi said:
Seems like a driver issue. Can you try installing the drivers in a different system?
If it goes well, then use install cwm touch recovery from fastboot. You can take backup and flash new ROMs after that.
Try Nexus Root Toolkit to install drivers if you don't have access to a different system.
Click to expand...
Click to collapse
Don't I need to have android debugging enabled? If so, I don't think Nexus Root Toolkit will work. I flashed a ROM to my NS4g & I get boot loops. I flashed the wrong Gapps a few months ago.
I was hoping there would be a way to automatically turn android debugging on. I know it may sound dumb & also probably impossible.
Any other tips.
Tell me I'm screwed. Haha.
kijp15 said:
Don't I need to have android debugging enabled? If so, I don't think Nexus Root Toolkit will work. I flashed a ROM to my NS4g & I get boot loops. I flashed the wrong Gapps a few months ago.
I was hoping there would be a way to automatically turn android debugging on. I know it may sound dumb & also probably impossible.
Any other tips.
Tell me I'm screwed. Haha.
Click to expand...
Click to collapse
I disabled USB debugging. Rebooted to bootloader. Fired up 'fastboot devices' on cmd and could see my phone. This tells me that I do not need USB debugging on fastboot.
If you see an unknown device in Device Manager while in fastboot then use Universal Naked Driver to install the drivers. But since you don't, you'll need another PC to do this stuff. Once drivers are installed, you can do a 'fastboot reboot recovery' to get into recovery and fix the the problems. The first thing I advice is to flash a touch recovery. The rest is up to you.
Flash back the original soju firmware back onto your device by first using "nexus s root toolkit v.1.8.2 by wugfresh". It may take a little of your time downloading the roms and installing the drivers but trust me it should be working and your phone will boot into stock android 4.1.2. You can then root your device and install custom recovery as normal. Anything do pm me :laugh: ps, click the bricked option one the software is loaded up and remember to connect your device only and remove other phones from your computer