Related
my phone will drop connection and then not reconnect. no voice, no data. (wifi still works)
what I've tried:
1. Different radios/firmware
2. different roms
3. different preferred network types
4. switching airplane mode on and off
what I haven't tried:
1. different sim
2. calling tmobile for suggestions
What else could cause this problem?
it could be a hardware issue
Hello,
I have the same issue than you !
I am facing issues such as call drop and no 3G data connection in some area in my region since I have 5 signal bar and H letter displayed (HSDPA connection)...
I have found a workaround consisting in:
1 - Switching to GSM Only mode (2G Only)
2 - Desabling Mobile Data Connection
Then it works, I can pass and receive voice call ...
Regards,
Nino
I'm new to the Sensation and having the exact same issue.
Followed the stickies in the Dev section to S-OFF, root and bypass SIM lock and then once the SIM card is inserted I get only GSM and no data.
If you use *#*#4636#*#* in the Dialer and go to Phone Information do you notice that it always switches to WCDMA preferred? I change to GSM/CDMA auto PRL like all my other Android devices (on Rogers Wireless) and it disconnects, reconnects but only for GSM and no data. It sometimes says it's connected to EDGE or HSPA but no icon at the top right and then it reverts back to GSM.
I have also tried flashing virtually every firmware, ensuring that the radio and RILs match (I had an HTC Desire Z so the HTC phones are not new to me entirely). I don't know what else to do. I tried a Bell SIM card and tried all of the same options to no avail.
I really hope someone can figure this out. I don't want to have destroyed a phone that I just bought for my wife. Her Atrix broke and I purchased that outright as well, so this is really killing my wallet. I've been through about 10 Android devices and I wouldn't say I'm a newb, but I really do feel like one right now. This sucks!
Get a new sim from tmo if it's over 2 phones old.
Sent from my HTC Sensation 4G with Beats Audio using Tapatalk
mrbkkt1 said:
Get a new sim from tmo if it's over 2 phones old.
Sent from my HTC Sensation 4G with Beats Audio using Tapatalk
Click to expand...
Click to collapse
Exactly. Although I got it before I saw your post, you were completely correct.
definitely try a new sim card.
bongd said:
I'm new to the Sensation and having the exact same issue.
Followed the stickies in the Dev section to S-OFF, root and bypass SIM lock and then once the SIM card is inserted I get only GSM and no data.
If you use *#*#4636#*#* in the Dialer and go to Phone Information do you notice that it always switches to WCDMA preferred? I change to GSM/CDMA auto PRL like all my other Android devices (on Rogers Wireless) and it disconnects, reconnects but only for GSM and no data. It sometimes says it's connected to EDGE or HSPA but no icon at the top right and then it reverts back to GSM.
I have also tried flashing virtually every firmware, ensuring that the radio and RILs match (I had an HTC Desire Z so the HTC phones are not new to me entirely). I don't know what else to do. I tried a Bell SIM card and tried all of the same options to no avail.
I really hope someone can figure this out. I don't want to have destroyed a phone that I just bought for my wife. Her Atrix broke and I purchased that outright as well, so this is really killing my wallet. I've been through about 10 Android devices and I wouldn't say I'm a newb, but I really do feel like one right now. This sucks!
Click to expand...
Click to collapse
I've tried 5 different SIMs now. It's not a SIM issue. The other poster has a different issue but mine's identical to the OP's.
bongd said:
I've tried 5 different SIMs now. It's not a SIM issue. The other poster has a different issue but mine's identical to the OP's.
Click to expand...
Click to collapse
have you tried allowing data roaming in settings? I'm sure you have...
stonew5082 said:
have you tried allowing data roaming in settings? I'm sure you have...
Click to expand...
Click to collapse
Haha yup, thanks though! I know, it could always be something so tiny and stupid too, eh.
Someone posted in my own thread and said to do the following. Will by trying it once I get home. Could the OP please try this and report back? I sure hope it works!
johnerz said:
first open the dialer
Type *#*#4636#*#*
select phone info
look for the only drop down box - hit it - choose wcdma prefered - hit back 3 times
Go to menu settings woreless and networks
hit mobile network - it need to be ticked
hit mobile networkS hit APN or Access point names - hit the menu button - choose reset to defaults
go back to mobile networks - choose network mode, select wcdma only - look for the 3G or h sign when it shows go back and choose gsm/wcdma auto
if that fails do a manual net work selection - choose your networks 3G option
Click to expand...
Click to collapse
bongd said:
Haha yup, thanks though! I know, it could always be something so tiny and stupid too, eh.
Someone posted in my own thread and said to do the following. Will by trying it once I get home. Could the OP please try this and report back? I sure hope it works!
Click to expand...
Click to collapse
I did try every setting in there. The new sim card fixed it! So I guess our problems are different.
I just switched to Rogers with an LTE plan and LTE SIM card, and my area is has complete LTE coverage but the best I am getting is HSPA+. Does the UCLA3 only enable LTE on the 700mhz band? If so, what is the best Rogers modem to use for LTE? Thanks!
Oh for ****s sake
Sent from my SAMSUNG-SGH-I727 using xda premium
not sure about lte, but it works for 3g
BaconStep said:
Oh for ****s sake
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
and wow relax, just tell him hes in the wrong section
Welcome back man!!! looks like you need to check on rulez again so you know where to post your questions!!!!
To answer your question just make nadroid and flash it if it does not have LTE then you can clear out and always go back to ur Nandroid!
Woah was this posted in the Developement section? :/ I lurk XDA 24/7 and I have like 10 tabs open so I posted in the wrong one :/ Really sorry about this, didn't mean to post here
BaconStep said:
Oh for ****s sake
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
There's really no need for that at all. That only makes it worse.
OP, you're better off asking a question like this in the QA section. Good luck!
SGS2X said:
Woah was this posted in the Developement section? :/ I lurk XDA 24/7 and I have like 10 tabs open so I posted in the wrong one :/ Really sorry about this, didn't mean to post here
Click to expand...
Click to collapse
Whoops! Sorry.
Sent from my GT-P7510 using xda premium
I can't remember if this works on the ulca3 modem, but try dialing *#2263# rogers uses lte B4 1700/2100 try manually setting it to that and see if it works
appdroid said:
Welcome back man!!! looks like you need to check on rulez again so you know where to post your questions!!!!
To answer your question just make nadroid and flash it if it does not have LTE then you can clear out and always go back to ur Nandroid!
Click to expand...
Click to collapse
Does the nandroid restore the baseband? I know a nandroid restores everyhting else but you might actually have to reflash the original radio that you were on before the UCLA3 version...not actually sure though.
This radio is the best for Rogers everything work great, lte as well and reception is great. At work where I only sometimes got connection at all, I have min two bars now, and internet works perfect. Thanks for makers and uploader
Sent from my SAMSUNG-SGH-I727 using xda premium
i concur.
lte picks up where the rogers modem doesn't I go between that and the telus modem (which doesn't do LTE but has good hspa speeds) It also does a great job in just automatic mode selecting the right band for low signal areas.
Yep I use it on Rogers with LTE working.
Also, someone mentioned a fix where you dial *#2263# to change the baseband to LTE only.. which works, but I stopped getting incoming calls and couldn't make outgoing calls when I did that.. fyi. Maybe it was just my case.
coolerbean said:
Yep I use it on Rogers with LTE working.
Also, someone mentioned a fix where you dial *#2263# to change the baseband to LTE only.. which works, but I stopped getting incoming calls and couldn't make outgoing calls when I did that.. fyi. Maybe it was just my case.
Click to expand...
Click to collapse
No, i read somewhere only data works over LTE everything else is UMTS, I forgot about that
32dave said:
No i read somewhere only data works over LTE everything else is UMTS, I forgot about that
Click to expand...
Click to collapse
Not only data uses LTE network. When I used LTE data plan I got missing calls sometime (the call went directly into voice mail). Called rogers and the tech confirmed that calls work through LTE as well. If the signal of LTE is weak the call then bounces back into voice mail.
odeccacccp said:
This radio is the best for Rogers everything work great, lte as well and reception is great. At work where I only sometimes got connection at all, I have min two bars now, and internet works perfect. Thanks for makers and uploader
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
i've been switching between LA3 and KJ7 modems past 2 weeks...signal seemed great on LA3, but i'm not convinced it's good for me....
Consistently past several tests I get 2-3Mb down and 0.5-0.8Mb up on LA3......and if I flash to KJ7 I get 2-14Mb down and 1-3Mb up.....flash back to LA3 and it changes back....and flash again to KJ7 and back to other numbers....
In my area, KJ7 actually seems to be better, and I've switched back for now. I'm mainly around HSPA, not LTE though...
It also seems to be giving me better battery life...albeit we're talking difference of maybe 30 minutes to 1 hour...this phone is a PIG when it comes to battery life
So I've been using this modem since yesterday and I haven't been able to pick up an LTE signal but maybe Rogers coverage map is incorrect? idk but the 3g signal has been great
The only problem I'm facing (which I'm not sure if it's caused by the modem or something else) is that I couldn't send a text message to anyone but myself cuz it would fail... but if that person sends me a text first, then I can start sending text messages back no problem...
I registered for Rogers One Number, does that have anything to do with it?
UCLA3 radio works fine for me and I'm on Rogers network.
To check if your problems are radio dependent, why can't you just flash back to the Rogers radio? I believe it is on the same radio thread.
number16 said:
UCLA3 radio works fine for me and I'm on Rogers network.
To check if your problems are radio dependent, why can't you just flash back to the Rogers radio? I believe it is on the same radio thread.
Click to expand...
Click to collapse
I tried that twice but when I check under Status it still shows the UCLA3 and not the one I flashed.
Also, I keep setting to to GSM/HSPA/LTE (Auto) mode but it keeps switching back to the one without LTE
EDIT - For some reason the APN settings were only for non-LTE access. Changed the apn to ltemobile.apn and now it works
SGS2X said:
I tried that twice but when I check under Status it still shows the UCLA3 and not the one I flashed.
Also, I keep setting to to GSM/HSPA/LTE (Auto) mode but it keeps switching back to the one without LTE
EDIT - For some reason the APN settings were only for non-LTE access. Changed the apn to ltemobile.apn and now it works
Click to expand...
Click to collapse
Did you figure out why you couldn't write new modem over ucla3
Sent from my SAMSUNG-SGH-I727 using xda premium
coolerbean said:
Yep I use it on Rogers with LTE working.
Also, someone mentioned a fix where you dial *#2263# to change the baseband to LTE only.. which works, but I stopped getting incoming calls and couldn't make outgoing calls when I did that.. fyi. Maybe it was just my case.
Click to expand...
Click to collapse
don't do that, just go to Settings/Wireless/Mobile Networks and change it there.
---------- Post added at 12:50 PM ---------- Previous post was at 12:48 PM ----------
SGS2X said:
So I've been using this modem since yesterday and I haven't been able to pick up an LTE signal but maybe Rogers coverage map is incorrect? idk but the 3g signal has been great
The only problem I'm facing (which I'm not sure if it's caused by the modem or something else) is that I couldn't send a text message to anyone but myself cuz it would fail... but if that person sends me a text first, then I can start sending text messages back no problem...
I registered for Rogers One Number, does that have anything to do with it?
Click to expand...
Click to collapse
Change the Apk to ltemobile.apk, will work fine
I have ALWAYS had very poor AT&T service in my house, from my iphone 3g, iphone 4, iphone 4s....as soon as you pull in my neighborhood AT&T service just goes to ***
I got the One X however and realized I can pick up LTE here when the radio first turns on! I can put it on airplane mode, take it off...and I'll get LTE for about a minute. I get 10mbps down instead of the 1mbps when it's just on "4G"
However..this can barely make it through a SpeedTest as it's 1 or 2 bars of service...then it switches from 2 bar 4G LTE to the 3 or 4 bar "4G"
The phone is thinking I get better service with just the plain 4G so it forces me to connect to that....in reality it's a tonnnn slower and much worse.
Is there any APN setting or any root hacks to force the LTE connection? I get LTE pretty much everywhere in town (las vegas) but like I said my neighborhood doesn't seem to be on AT&T's maps!
If you go to your dialer and type in *#*#4636#*#* it will take to a screen where down a bit from the middle is the option "select network type" tap that and there is and "lte only" option. I have read that this works to force only hspa+ but can't confirm it for forcing lte. Give it a shot though.
Sent from my HTC One X using XDA
I found the screen....Has a bunch of options with "LTE Only" being one of them...however...when I click on that option it flashes as being set to "LTE Only" for half a second and then reverts to the default option of "GSM/WCDMA/LTE auto"
Damn, thought you were on to something!
play2lose said:
I found the screen....Has a bunch of options with "LTE Only" being one of them...however...when I click on that option it flashes as being set to "LTE Only" for half a second and then reverts to the default option of "GSM/WCDMA/LTE auto"
Damn, thought you were on to something!
Click to expand...
Click to collapse
Did you try any of the other settings just out of curiosity to see if any of them worked?
Edit: just read through a thread that is doesn't work now. Bummer
Sent from my HTC One X using XDA
Hello There !
Are you still getting this problem ?
A friend just bought a OneX and Got this prob ...
Any idea ? maybe a Radio Update ?
Thank you in advance !
bradleyG said:
If you go to your dialer and type in *#*#4636#*#* it will take to a screen where down a bit from the middle is the option "select network type" tap that and there is and "lte only" option. I have read that this works to force only hspa+ but can't confirm it for forcing lte. Give it a shot though.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
This does NOT work for forcing either HSPA or LTE. It always reverts back to auto. AT&T does not let you choose your network, period. We will not be able to choose the network unless and until we get the Rogers ROM working on the AT&T units (or until someone builds a custom ROM giving us the functionality of Rogers).
chrikenn said:
This does NOT work for forcing either HSPA or LTE. It always reverts back to auto. AT&T does not let you choose your network, period. We will not be able to choose the network unless and until we get the Rogers ROM working on the AT&T units (or until someone builds a custom ROM giving us the functionality of Rogers).
Click to expand...
Click to collapse
Yes, if you would have read the other posts you would have seen that we already mentioned that this doesn't work.
Sent from my HTC One X using XDA
Necro'ing this post because it has recently helped me in getting LTE coverage and I hope it helps others. This code mentioned earlier in this thread, *#*#4636#*#* and method of forcing LTE does work on Rogers devices.
skydirt said:
Necro'ing this post because it has recently helped me in getting LTE coverage and I hope it helps others. This code mentioned earlier in this thread, *#*#4636#*#* and method of forcing LTE does work on Rogers devices.
Click to expand...
Click to collapse
Sure it does... rogers devices and debloated ROMs are the only ones that can be forced into LTE mode. It's AT&T ROMs that can't
Sent from my Nocturnal Evita
If you are rooted and have an unlocked bootloader, try a version of CleanRom or a stock rooted rom which is not an AT&T base. I have been able to lock my radio to LTE (only when not making calls that is) with CR V and I am on AT&T. The only thing is that when you make a call you get bumped to 3g/HSPA because AT&T doesn't do voice over LTE
I live in north jersey and we don't have late I'm 5 min from NY and it has amazing lte but I don't go too often I want to totally disable my late and maybe re enable it once north jersey gets late can someone tell me if that's possible and if so how
Sent from my HTC One X using XDA
Been posted a million times already. Use the search. Go to the dialer and dial #*#*4636#*#*. Go to the top option(phone information) then scroll down to the "gsm/wcdma/LTE auto" dropdown and switch it to wcdma preferred
Sent from my HTC One X using Tapatalk 2
PurpleFries said:
Been posted a million times already. Use the search. Go to the dialer and dial #*#*4636#*#*. Go to the top option(phone information) then scroll down to the "gsm/wcdma/LTE auto" dropdown and switch it to wcdma preferred
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Doesn't work it actually calls that number
Sent from my HTC One X using XDA
PurpleFries said:
Been posted a million times already. Use the search. Go to the dialer and dial #*#*4636#*#*. Go to the top option(phone information) then scroll down to the "gsm/wcdma/LTE auto" dropdown and switch it to wcdma preferred
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Slight problem: This doesn't work. That very same thread reveals that the phone will just override whatever you choose.
even though your not in a lte area, it isnt searching for the signal. Proven from other members already. So dont worry about it. If your not using data, just turn off mobile data for now.
I even tried to make the APN that a lot of people are having luck with, but where I live there is constantly an LTE signal so it got it anyways even with the HSPA+ APN I made for some reason. My battery life is bad with LTE but the speed is amazing.
Sent from my HTC One X using Tapatalk
I'm trying to set the HSPA-only APN on my phone, since my phone keeps trying extra hard to get on the little LTE it can find here, and it's MURDERING my battery.
Seems AT&T locked the APN's, too. I can't select anything other than the default AT&T profile.
I think you guys could try the patch to convert to Rogers Version in dev section... (root required)
not sure if you guys could flash a Rogers RUU or not (s-off required)
at least ATT stock rom, its hard to disable LTE...
Made a new APN with the exact same settings as the default but with APN Type set to *. Speeds are about the same as my gsii.
Nvm, that didn't work. Ill have to go back to the wap.cingular settings.
Try editing the build.prop and changing the ro.telephony.default_network setting to 0. The default value set by AT&T should've been 9, indicating that the device should connect to LTE > WCDMA > GSM networks in that order. Setting it to 0 reconfigures the device to prefer WCDMA networks over GSM and LTE networks.
The changed setting should read: ro.telephony.default_network=0
Click to expand...
Click to collapse
Reboot, and you should be on HSPA+.
I live in an lte area and have noticed only a slight increase in battery use...and speeds are fast...20 mbps +
Sent from my HTC One X using xda premium
Try editing the build.prop and changing the ro.telephony.default_network setting to 0. The default value set by AT&T should've been 9, indicating that the device should connect to LTE > WCDMA > GSM networks in that order. Setting it to 0 reconfigures the device to prefer WCDMA networks over GSM and LTE networks.
The changed setting should read: ro.telephony.default_network=0
Reboot, and you should be on HSPA+.
Click to expand...
Click to collapse
Thanks! Just tried this. Didn't work for me. Btw, I am in LTE area - could that be a reason?
nman123 said:
I live in north jersey and we don't have late I'm 5 min from NY and it has amazing lte but I don't go too often I want to totally disable my late and maybe re enable it once north jersey gets late can someone tell me if that's possible and if so how
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
If you do not live in an LTE area then there is no reason to disable LTE on the phone. AT&T uses an integrated "circuit switched fallback" on the radio which defaults to UMTS/HSPA(+) when not in an LTE area.
The only people who would benefit from an LTE "on/off" switch would be people who do live in an LTE area so that they can disable it when not using the phone for simple sync procedures.
live4nyy said:
If you do not live in an LTE area then there is no reason to disable LTE on the phone. AT&T uses an integrated "circuit switched fallback" on the radio which defaults to UMTS/HSPA(+) when not in an LTE area.
The only people who would benefit from an LTE "on/off" switch would be people who do live in an LTE area so that they can disable it when not using the phone for simple sync procedures.
Click to expand...
Click to collapse
I live in a really annoying place in NJ where it is constantly switching between LTE (1 bar) and HSPA+ (4 bars). I can literally watch my battery drain. And I can barely use data since its constantly switching back and forth.
After some searching, I found that you can go to the APN settings, create a new profile, change the "Name" to whatever (I chose AT&T HSPA+) and change the "APN" field to "phone" without quotation marks.
Leave everything else defaulted to the normal values.
Then save the APN and go back to the APN screen and click on the little white radio button on the right of the APN you created (be sure to click on the radio button, not the whole bar).
Reboot. I just did this today so I will see how it affects my battery life.
Build.prop is the Only Correct Method
ascendantjustice said:
Try editing the build.prop and changing the ro.telephony.default_network setting to 0. The default value set by AT&T should've been 9, indicating that the device should connect to LTE > WCDMA > GSM networks in that order. Setting it to 0 reconfigures the device to prefer WCDMA networks over GSM and LTE networks.
Reboot, and you should be on HSPA+.
Click to expand...
Click to collapse
^This.
Changing the apn will make your data slower, but not alter your radio's behavior. Changing the build.prop will keep your radio from looking for anything else once it finds a WCDMA (UMTS, 3G) connection.
Note that you need to find and change all occurrences of ro.telephony.default_network to 0. The build.prop on AT&T RUUs includes it multiple times with different values.
Xodium said:
Slight problem: This doesn't work. That very same thread reveals that the phone will just override whatever you choose.
Click to expand...
Click to collapse
It doesn't work because it's *#*#4636#*#* not the other way around.
Sent from my HTC One X using XDA
ytwytw said:
not sure if you guys could flash a Rogers RUU or not (s-off required)
Click to expand...
Click to collapse
s-off not required for a different ruu, but supercid is. We can currently get supercid.
Tried all methods suggested here but was unable to turn off LTE. It kills battery as fast as it downloads the data.
Sent from my HTC One X using XDA
I have a Rogers unit running AT&T v1.85 and ...
I was able to dial the following:
*#*#4636#*#*
and it allowed me to change the network type. Actually, there were numerous options.
Peter
P.S. The reply in, I believe, post 2 said to dial a number similar to that noted above, but some characters were reversed.
Peter
P.S. My heading isn't quite accurate. I was running AT&T v1.85, but now it's CleanROM v2.1; although, it's still based on an AT&T RUU.
PeterHTC said:
I was able to dial the following:
*#*#4636#*#*
and it allowed me to change the network type. Actually, there were numerous options.
Peter
P.S. The reply in, I believe, post 2 said to dial a number similar to that noted above, but some characters were reversed.
Peter
P.S. My heading isn't quite accurate. I was running AT&T v1.85, but now it's CleanROM v2.1; although, it's still based on an AT&T RUU.
Click to expand...
Click to collapse
Too bad, it doesn't work on stock ROM.
Sent from my HTC One X using XDA
For some reason I cannot get LTE to work at all on CM10. I've done everything and it still wont work at all. I tried reverting back to stock rom, and when I did, LTE worked. So I thought if I went back to CM10 from stock it would resolve the issue, but it did not. I've checked my APNs and I cannot change the preferred network mode and i tried *#*#info#*#* and i can't change anything there to anything that has LTE on it. I'm not sure if it's just a problem with the ROM or what, but I've done plenty of researched, searched all the forums, and can't find anything that will fix.
Additional information:
Im in ATT
I've tried all the radios
and I AM in an LTE area.
nickd009 said:
For some reason I cannot get LTE to work at all on CM10. I've done everything and it still wont work at all. I tried reverting back to stock rom, and when I did, LTE worked. So I thought if I went back to CM10 from stock it would resolve the issue, but it did not. I've checked my APNs and I cannot change the preferred network mode and i tried *#*#info#*#* and i can't change anything there to anything that has LTE on it. I'm not sure if it's just a problem with the ROM or what, but I've done plenty of researched, searched all the forums, and can't find anything that will fix.
Additional information:
Im in ATT
I've tried all the radios
and I AM in an LTE area.
Click to expand...
Click to collapse
Just making sure, but you know the LTE icon doesn't exist in cm10 , right? LTE is indicated by the 4g icon
xcrazydx said:
Just making sure, but you know the LTE icon doesn't exist in cm10 , right? LTE is indicated by the 4g icon
Click to expand...
Click to collapse
Yeah, I only get HSPA+, HSPA, 3G
nickd009 said:
Yeah, I only get HSPA+, HSPA, 3G
Click to expand...
Click to collapse
Ok, try different apn. Which cm10 are you trying to use?
Does the problem happen on other ROMs? I'm not saying to use a different ROM, just saying that if it doesn't happen on, say, AOKP or Orthus (both CM-based), it's probably an issue with how CM10 is configured on your phone.
If you go into network operators (settings -network)and select att it will allow to change modes.
whassupmyninja said:
If you go into network operators (settings -network)and select att it will allow to change modes.
Click to expand...
Click to collapse
omg.. that was it all along. wtf, I feel so dumb now..
nickd009 said:
omg.. that was it all along. wtf, I feel so dumb now..
Click to expand...
Click to collapse
Haha yeah most of the time this setting is overlooked and this option enables you to turn off LTE if you want (which you don't have to have a RAT unlocked modem as presumed) and if you go to *#*#4636#*#* on your dialer you can have it set to LTE only as well.
UZ7 said:
Haha yeah most of the time this setting is overlooked and this option enables you to turn off LTE if you want (which you don't have to have a RAT unlocked modem as presumed) and if you go to *#*#4636#*#* on your dialer you can have it set to LTE only as well.
Click to expand...
Click to collapse
I actually have another problem now, after a reboot, it doesn't show any options for me to choose under available networks?
it came back after a few tries but then went away again, it's not consistently there to choose.
Does it show a searching animation?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I have the exact same issues. I've done everything on this post plus done all the research as well. For my problem whenever I enter an LTE area my data service completely drops for about 5 seconds and then when it connects it only shows HSPA+. I have never been able to pick up LTE. When I was on CM9.1 I had no issues at all. LTE connected with no issues. So is this a CM10 issue or a phone issue?
try this, might help, might not, make a backup, if you have more than one apn, remove all apn's except your lte apn(ATT Pta, for rogers :ltemobile), restart phone
edit: of course make sure it was set to the lte apn in the first place, if it was and still have probs, do above procedure if you have more than one apn
vincom said:
try this, make a backup, remove all apn's except your lte apn, restart phone
Click to expand...
Click to collapse
For some reason my APN was not set to the lte one (ATT Pta). I changed it to that. Hopefully that fixes my problem. Thanks for the help!
I have a slightly different problem. I am running the latest cm10 nightly and notice that any time I get lucky and go into a 4g coverage area I can only make phone calls. No data transfers at all. I have my APN set to ATT LTE pta which I assumed is the right selection. Im normally in a A3g(HSPA)~700-17 coverage area. Is this the wrong APN to use?
njbballjerzy5 said:
For some reason my APN was not set to the lte one (ATT Pta). I changed it to that. Hopefully that fixes my problem. Thanks for the help!
Click to expand...
Click to collapse
The APN change worked for me. This is the proof
njbballjerzy5 said:
The APN change worked for me. This is the proof
Click to expand...
Click to collapse
Do you automatically switch back and fort from 3 to 4g with that APN setting when you move around without losing data capability?
26.2man said:
Do you automatically switch back and fort from 3 to 4g with that APN setting when you move around without losing data capability?
Click to expand...
Click to collapse
Yup. I have HSPA/HSPA+ around my house but close to work I have LTE. No problem with switching or losing data connection when I go from HSPA to LTE. Just double check your APN settings. There might be a typo or some missing field. Or you can create a new APN for lte and use that as your default.
njbballjerzy5 said:
Yup. I have HSPA/HSPA+ around my house but close to work I have LTE. No problem with switching or losing data connection when I go from HSPA to LTE. Just double check your APN settings. There might be a typo or some missing field. Or you can create a new APN for lte and use that as your default.
Click to expand...
Click to collapse
Okay
Im a nooob. How do you create APN's ?
26.2man said:
Okay
Im a nooob. How do you create APN's ?
Click to expand...
Click to collapse
Try using Google search! It always helps me!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
@26.2man, you've gotta have att provision you for lte at the store or whatever if you haven't done so already. Then it should work.
Sent from my HTC PH39100 using xda premium