Hello everyone, are 2 days that I lose my mind on google looking for a guide or an update of this tablet made in china.
The tablet in question is the Flytouch 7 V10 Processor VC882-1ghz 800mhz ARM Cortex A8 Android 2.3 version of installed kernel 2.6.35.7 root @ zjd # 4
just get the tablet already mounted the Roma and that kernel rootati but wanted to know if it was possible to update it since I have frequent problems with wifi (5 minutes x locks the signal then disconnects and reconnects to infinity).
Also, I wanted to know if there is a variant of the Clockwork Mod recovery for these tablets so you can make peace with all the various functions and backup update.
Did u get an answer?
web.massagiorgio said:
Hello everyone, are 2 days that I lose my mind on google looking for a guide or an update of this tablet made in china.
The tablet in question is the Flytouch 7 V10 Processor VC882-1ghz 800mhz ARM Cortex A8 Android 2.3 version of installed kernel 2.6.35.7 root @ zjd # 4
just get the tablet already mounted the Roma and that kernel rootati but wanted to know if it was possible to update it since I have frequent problems with wifi (5 minutes x locks the signal then disconnects and reconnects to infinity).
Also, I wanted to know if there is a variant of the Clockwork Mod recovery for these tablets so you can make peace with all the various functions and backup update.
Click to expand...
Click to collapse
I am also in need. I am in trouble. I started by using the "Z4Root" and now I am stuck in android boot screen. I have tried recovery but I get the android laying down but no menu. Really can use a step by step on how to flash or root. Please Thank you!
Related
Hello guys,
I just bought a Tablet from Vinus - MID-08ii. It has Samsungs CPU " ARM cortex a8 1G", and it has Android 2.3. I would like to install Cyanogen Mod or Android 3+.
Can anyone help me, because there is no android for this tablet. But I think that since it has Samsung CPU, it would be possible install custom ROM.
Any ideas?
Lovemo JNR
Antique_Angel said:
Hello guys,
I just bought a Tablet from Vinus - MID-08ii. It has Samsungs CPU " ARM cortex a8 1G", and it has Android 2.3. I would like to install Cyanogen Mod or Android 3+.
Can anyone help me, because there is no android for this tablet. But I think that since it has Samsung CPU, it would be possible install custom ROM.
Any ideas?
Click to expand...
Click to collapse
[email protected] im looking for vinus v9 rom i bricked it during font change and its now 2 months without a phone
Hi guys,
I recently bought a chinese 7" tablet, it's pretty good, runs ICS but it has a china - made OS with a lot of pre-installed chinese apps, chinese keyboard and stuff that i can't remove.
The tablet has:
CPU: Telechips TCC8923, 1.2GHz, Cortex-A5 Dual Core;
GPU: Mali-400 MP
Operation System Android 4.0.3
Is there any clean, naked, basic ICS rom over here which i can use on it? Or anything else that doesn't have chinese stuff on it...
Thanks
Need Rom for my Tablet
Hi Guys,
I own a Touchmate Tabzz TM-MID810
Android 2.3.1
Kernel 2.6..32.27
Build Number
rk29_gingerbread_v2.10.00
rk29sdk-eng 2.3.1 GINGERBREAD eng.hey.20120222.130909 test-keys
These are the info's found
Now the problem is I had rooted the tab and someway messed it whole now wifi doesnt work, when i shutdown it takes command and shows shuttingdown but never shuts down have to start again pressing reset pin..
I need a custom rom or anything to fix it and the precedure to fix it as I am full new to android....
please help....
I've got an Box Chip Multi-core A13 tablet novo 7 legend Android 4.0.4 Baseband version 1.5 Kernel version 3.0.8+.
The problem is that a lot of thing are in chinese in the android version and i want to install a new ROM. I've installed ROMs for android phones but this is different and i don;t know how to do it. Can somebody guide me please ?
Thank you.
Hello, my tablet is latte ice tab2 LV0Q quad core. It's just came out about 1-2 months or so. I made a backup Rom for it just incase something happen. Now my tablet would only show a blank screen. I was wondering how do I repack or turn the backup Rom I made that consist of boot,recovery,kernel,data1-2 etc....into .img file so I can reflash it using RKbatch tool. Or do you know Amy custom Rom for it since I install the wrong Rom for latte ice tab2. Main question is, how do I flash my backup Rom via rkbatch tool since rockchip base tablet can only be flash Rom that way....
#tablet spec-
- quad core rk3188
- quad core gpu Mali 400
- 1200x800 IPS display
-1 gb ram
-jellybean 4.2.2
-Bluetooth 4.0
-8-9 hrs battery life
-7' display
Any help or suggestion will be greatly appreciated, thanks.
Hi everyone! This is my first post so..first of all I apologize for my grammar, I'm Spanish.
A few days ago I found at home a BQ phablet model Elcano 2 Quadcore. After charging and turning on the device I realized that it currently runs android 4.2.2. I managed to root my device so that I could update it to a more current version of android. The problem comes when I can't find any TWRP recovery or support on Lineage OS.
I have read that you can use the recovery of another device with the same specifications as mine but I have not found anything on the internet either.
Hope you can help me update my phablet. I don't need the latest version of android, by making my device useful I'm satisfied.
I downloaded the Aida64 application to know what processor I have:
MediaTek MT8389
4x ARM Cortex-A7 @ 1508MHz
1Gb Ram
32Gb ROM
7inch
Thanks dudes