Related
Came across the following build.prop additions to improve battery life. Do these work on the ICS leak?
o.ril.disable.power.collapse=0
pm.sleep_mode=1
debug.performance.tuning=1
debug.composition.type=hw
debug.sf.hw=1
persist.android.strictmode=0
persist.sys.use_dithering=1
persist.sys.ui.hw=true
persist.sys.purgeable_assets=1
ro.com.google.networklocation=0
ro.kernel.android.checkjni=0
ro.config.nocheckin=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
video.accelerate.hw=1
windowsmgr.max_events_per_sec=240
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
Just trying to get the most out of my battery
This is simply a compilation of tweaks to use it simply copy these to your build.prop file
ro.max.fling_velocity=4000
windowsmgr.max_events_per_sec=150
mot.proximity.delay=25
ro.lge.proximity.delay=25
ro.telephony.call_ring.delay=0
### power tweaks
pm.sleep_mode=1
ro.ril.disable.power.collapse=1
wifi.supplicant_scan_interval=180
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
### gpu rendering
debug.sf.hw=1
debug.composition.type=gpu
debug.composition.type=cpu
debug.performance.tuning=1
debug.enabletr=true
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
### Media tweaks
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
### Kernel Tweaks
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
persist.sys.purgeable_assets=1
persist.android.strictmode=0
### 3g/signal tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=32
ro.ril.hep=1
ro.ril.hsdpa.category=28
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=268449905
ro.ril.hsupa.category=9
ro.ril.enable.sdr=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
ro.ril.disable.power.collapse=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ril.cdma.ppp.up=
persist.ril.uart.flowctrl=10
### 3G TurboCharger
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.tcp.buffersize.default=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.wifi=262144,524288,1048576,262144,524288,1048576
net.tcp.buffersize.lte=262144,524288,3145728,262144,524288,3145728
net.tcp.buffersize.hsdpa=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.evdo_b=6144,262144,1048576,6144,262144,1048576
net.tcp.buffersize.umts=6144,87380,110208,6144,16384,110208
net.tcp.buffersize.hspa=6144,87380,262144,6144,16384,262144
net.tcp.buffersize.gprs=6144,8760,11680,6144,8760,11680
net.tcp.buffersize.edge=6144,26280,35040,6144,16384,35040
click thanks if this helps
Sent from my H120 using xda app-developers app
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
### dalvik tweaks
dalvik.vm.heapstartsize=8m
#dalvik.vm.dexopt-flags=v=n,o=v,m=y
dalvik.vm.dexopt-flags=m=y,o=v,u=y
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.checkjni=0
dalvik.vm.checkjni=false
dalvik.vm.check-dex-sum=false
dalvik.vm.jniopts=warnonly
# gecata test
dalvik.vm.check-dex-sum=false
# gecata test
dalvik.vm.jmiopts=forcecopy
# Turn on Just In Time in dalvik virtual machine
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Sent from my H120 using xda app-developers app
Thnx...
Greetings! I got my Xperia Tipo Dual (St21a2) with official ICS, but I want to change the kernel to swap and also support USB OTG, look for the kernel but I just found for Xperia Tipo.
I also look for tweaks to improve it, I hope someone can help me, thanks!
I can help
these kernals work on my tipo dual fine :
http://forum.xda-developers.com/showthread.php?t=2540952 <-- Vengaence Reloaded (with OC)
http://forum.xda-developers.com/showthread.php?t=2134810 <-- Vengaence
some tweaks hmm
these in build.prop
Code:
################ tweaks ###########
# Faster Streaming
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
# Better Image & Audio Quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
# Net Speed Tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
# Google DNS
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
# No Delay In Making Call
ro.telephony.call_ring.delay=0
ring.delay=0
# Battery Tweaks
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
ro.ril.fast.dormancy.rule=0
# Proximity Tweaks
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Frees More RAM
persist.sys.purgeable_assets=1
# Signal Tweaks
ro.ril.enable.amr.wideband=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
# Fast Reboot
persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
# Lock App In Memory
sys.keep_app_1=put-process-name-of-app-here
# Other Tweaks
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.mot.eri.losalert.delay=1000
dalvik.vm.execution-mode=int:jit
ro.config.hwfeature_wakeupkey=0
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
persist.adb.notify=0
vm.stat_interval=1
persist.android.strictmode=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.config.nocheckin=1
# Enable Surface Dithering Which Will Raise Image Quality At The Cost Of Performances - 1=ON;0=OFF
persist.sys.use_dithering=0
# Enables 270 Degree Rotation
windowsmgr.support_rotation_270=true;
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
#
# Experimental Tweaks
#
touch.presure.scale=0.001
ro.min_pointer_dur=8
ro.media.enc.hprof.vid.fps=65
# ButtonLight Always On - Remove # Below To Enable
#ro.mot.buttonlight.timeout=0
# No BootAnimation For Faster Reboot - Remove # Below To Enable
debug.sf.nobootanimation=1
# May Improve Pictures - Remove # Below To Enable
ro.media.cam.preview.fps=0
debug.sf.hw=1
debug.performance.tuning=1
video.accelerate.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=gpu
sf.debug.enable3D=1
debug.fb.rgb565=0
#Qualcomm
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ENFORCE_PROCESS_LIMIT=false
MAX_SERVICE_INACTIVITY=false
MIN_HIDDEN_APPS=false
MAX_HIDDEN_APPS=false
CONTENT_APP_IDLE_OFFSET=false
EMPTY_APP_IDLE_OFFSET=false
MAX_ACTIVITIES=false
ACTIVITY_INACTIVE_RESET_TIME=false
MAX_RECENT_TASKS=false
MIN_RECENT_TASKS=false
APP_SWITCH_DELAY_TIME=false
MAX_PROCESSES=false
PROC_START_TIMEOUT=false
CPU_MIN_CHECK_DURATION=false
GC_TIMEOUT=false
SERVICE_TIMEOUT=false
MIN_CRASH_INTERVAL=false
#OOM
ro.FOREGROUND_APP_MEM=2048
ro.VISIBLE_APP_MEM=3072
ro.PERCEPTIBLE_APP_MEM=1024
ro.HEAVY_WEIGHT_APP_MEM=4096
ro.SECONDARY_SERVER_MEM=4096
ro.BACKUP_APP_MEM=6144
ro.HOME_APP_MEM=1024
ro.HIDDEN_APP_MEM=6144
ro.EMPTY_APP_MEM=8192
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=3
ro.PERCEPTIBLE_APP_ADJ=2
ro.HEAVY_WEIGHT_APP_ADJ=4
ro.SECONDARY_SERVER_ADJ=6
ro.BACKUP_APP_ADJ=7
ro.HOME_APP_ADJ=1
ro.HIDDEN_APP_MIN_ADJ=9
ro.EMPTY_APP_ADJ=15
#Loggers
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
logcat.live=disable
#dalvik
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m
dalvik.vm.heapminfree=10m
dalvik.gc.type=precise
dalvik.vm.dexopt-data-only=1
dalvik.vm.verify-bytecode=false
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
dalvik.vm.heaputilization=0.2
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapmaxfree=64m
WARNINGIf you have i.e.
Code:
dalvik.vm.heapstartsize
before tweak lines in build.prop, You must delete them all which are
SEEDER - entropy generatorYou must use kernel without FRANDOM, or original (only original is without frandom now). Only on that will work.
http://d-h.st/P0j <- just flash via cwm
after boot up go to terminal emulator
type :
Code:
su
allow permissions
next:
Code:
seeder
you welcome
there are drivers for processor, but phone is more laggy after it for me http://forum.xda-developers.com/showthread.php?t=2352724
you can check it
Szojox said:
these kernals work on my tipo dual fine :
http://forum.xda-developers.com/showthread.php?t=2540952 <-- Vengaence Reloaded (with OC)
http://forum.xda-developers.com/showthread.php?t=2134810 <-- Vengaence
some tweaks hmm
these in build.prop
Code:
################ tweaks ###########
# Faster Streaming
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
# Better Image & Audio Quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
# Net Speed Tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
# Google DNS
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
# No Delay In Making Call
ro.telephony.call_ring.delay=0
ring.delay=0
# Battery Tweaks
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
ro.ril.fast.dormancy.rule=0
# Proximity Tweaks
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Frees More RAM
persist.sys.purgeable_assets=1
# Signal Tweaks
ro.ril.enable.amr.wideband=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6
# Fast Reboot
persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
# Lock App In Memory
sys.keep_app_1=put-process-name-of-app-here
# Other Tweaks
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.mot.eri.losalert.delay=1000
dalvik.vm.execution-mode=int:jit
ro.config.hwfeature_wakeupkey=0
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
persist.adb.notify=0
vm.stat_interval=1
persist.android.strictmode=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.config.nocheckin=1
# Enable Surface Dithering Which Will Raise Image Quality At The Cost Of Performances - 1=ON;0=OFF
persist.sys.use_dithering=0
# Enables 270 Degree Rotation
windowsmgr.support_rotation_270=true;
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
#
# Experimental Tweaks
#
touch.presure.scale=0.001
ro.min_pointer_dur=8
ro.media.enc.hprof.vid.fps=65
# ButtonLight Always On - Remove # Below To Enable
#ro.mot.buttonlight.timeout=0
# No BootAnimation For Faster Reboot - Remove # Below To Enable
debug.sf.nobootanimation=1
# May Improve Pictures - Remove # Below To Enable
ro.media.cam.preview.fps=0
debug.sf.hw=1
debug.performance.tuning=1
video.accelerate.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=gpu
sf.debug.enable3D=1
debug.fb.rgb565=0
#Qualcomm
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ENFORCE_PROCESS_LIMIT=false
MAX_SERVICE_INACTIVITY=false
MIN_HIDDEN_APPS=false
MAX_HIDDEN_APPS=false
CONTENT_APP_IDLE_OFFSET=false
EMPTY_APP_IDLE_OFFSET=false
MAX_ACTIVITIES=false
ACTIVITY_INACTIVE_RESET_TIME=false
MAX_RECENT_TASKS=false
MIN_RECENT_TASKS=false
APP_SWITCH_DELAY_TIME=false
MAX_PROCESSES=false
PROC_START_TIMEOUT=false
CPU_MIN_CHECK_DURATION=false
GC_TIMEOUT=false
SERVICE_TIMEOUT=false
MIN_CRASH_INTERVAL=false
#OOM
ro.FOREGROUND_APP_MEM=2048
ro.VISIBLE_APP_MEM=3072
ro.PERCEPTIBLE_APP_MEM=1024
ro.HEAVY_WEIGHT_APP_MEM=4096
ro.SECONDARY_SERVER_MEM=4096
ro.BACKUP_APP_MEM=6144
ro.HOME_APP_MEM=1024
ro.HIDDEN_APP_MEM=6144
ro.EMPTY_APP_MEM=8192
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=3
ro.PERCEPTIBLE_APP_ADJ=2
ro.HEAVY_WEIGHT_APP_ADJ=4
ro.SECONDARY_SERVER_ADJ=6
ro.BACKUP_APP_ADJ=7
ro.HOME_APP_ADJ=1
ro.HIDDEN_APP_MIN_ADJ=9
ro.EMPTY_APP_ADJ=15
#Loggers
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
logcat.live=disable
#dalvik
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m
dalvik.vm.heapminfree=10m
dalvik.gc.type=precise
dalvik.vm.dexopt-data-only=1
dalvik.vm.verify-bytecode=false
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
dalvik.vm.heaputilization=0.2
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapmaxfree=64m
WARNINGIf you have i.e.
Code:
dalvik.vm.heapstartsize
before tweak lines in build.prop, You must delete them all which are
SEEDER - entropy generatorYou must use kernel without FRANDOM, or original (only original is without frandom now). Only on that will work.
http://d-h.st/P0j <- just flash via cwm
after boot up go to terminal emulator
type :
Code:
su
allow permissions
next:
Code:
seeder
you welcome
there are drivers for processor, but phone is more laggy after it for me http://forum.xda-developers.com/showthread.php?t=2352724
you can check it
Click to expand...
Click to collapse
Code:
Good
Very Good
Hello Dear N3 users & Devs this build.prop Tweaks so just copy/paste on ur Build.prop at the end of build.prop & may it's can helping u& may no & also for DEVS so I hope it's helping u
Guys this may work on ur Rom & may not so some roms didn't work with this build.prop so asking ur Dev roms ...
~~~> SUPPORTING LOLLIPOP <~~~
# thereassaad TWEAKS
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=300
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1 persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ro.telephony.call_ring.delay=0
ring.delay=0
# Other Tweaks:
ro.config.combined_signal=true
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.config.tima=0
ro.config.knox=0
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=12
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=16m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds)
ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.enc.jpeg.quality=100
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Rendering Tweaks
debug.composition.type=gpu
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=20
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# Better image quality, lower performance.
persist.sys.use_dithering=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=1
# Default Network Mode
ro.telephony.default_network=10
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Other Tweaks
qemu.hw.mainkeys=1
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
ro.config.hw_new_wifitopdp=1
Minimum brightness of your screen
ro.lcd_min_brightness=20
#
ro.ril.gprsclass=10
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# Multi Users
fw.max_users=30
fw.show_multiuserui=1
#
debug.sf.hw=1
video.accelerate.hw=1
persist.sys.use_dithering=1
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.NV_FPSLIMIT=90
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=0
ro.ril.set.mtu1472=1
touch.presure.scale=0.001
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=300
persist.cust.tel.eons=1
# Power Saving Tweaks
pm.sleep_mode=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=1m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.composition.type=gpu
ro.max.fling_velocity=20000
ro.min.fling_velocity=18000
debug.performance.tuning=1
debug.kill_allocating_task=0
debug.overlayui.enable=1
debug.egl.profiler=1
debug.egl.hw=1
debug.sf.hw=1
hw3d.force=1
hw2d.force=1
force_hw_ui=true
persist.sys.purgeable_assets=1
persist.sys.use_dithering=1
ro.min_pointer_dur=1
debug.kill_allocating_task=0
persist.sys.ui.hw=1
ro.debuggable=1
ro.config.disable.hw_accel=false
ro.kernel.android.checkjni=0
ro.secure=0
ro.min_pointer_dur=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
debug.composition.type=hw
debug.sf.hw=1
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
video.accelerate.hw=1
power_supply.wakeup=enable
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
ro.debuggable=1
ro.min_pointer_dur=1
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# 16bit Transparency
persist.sys.use_16bpp_alpha=1
#
# Screen recognizes only two fingers
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
# Remove FPS cap
debug.gr.swapinterval=0
# Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Enables MTP mode
persist.sys.usb.config=mtp
#For usb storage
ro.usb_host=1
#Simulate sdcard on /data/media
persist.fuse_sdcard=true
ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure=10
#Disable USB Debugging Popup
persist.adb.notify=0
# Bass audio props for Lolipop
tunnel.decode=false
lpa.use-stagefright=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resampler.quality=255
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
# Enable Quick Power-On mode to reduce boot-time
ro.config.hw_quickpoweron=true
# ButtonLight Always On - Remove # Below To Enable
ro.mot.buttonlight.timeout=0
# Enables 270 Degree Rotation
windowsmgr.support_rotation_270=true
thereassaad said:
Hello Dear N3 users & Devs this build.prop Tweaks so just copy/paste on ur Build.prop at the end of build.prop & may it's can helping u& may no & also for DEVS so I hope it's helping u
# Rendering Tweaks
debug.composition.type=c2d
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Default Network Mode
ro.telephony.default_network=10
# Enable GPU Acceleration
video.accelerate.hw=1
debug.performance.tuning=1
persist.sys.composition.type=gpu
debug.qc.hardware=true
debug.qctwa.statusbar=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=gpu
hw3d.force=1
ro.product.gpu.driver=1
persist.sys.use_16bpp_alpha=1
persist.sampling_profiler=0
hwui.render_dirty_regions=false
hwui.disable_vsync=true
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=497
pm.sleep_mode=1
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
# Battery save
ro.ril.disable.power.collapse=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Sensor Sleep Control
ro.ril.sensor.sleep.control=1
# Device will boot faster
persist.sys.shutdown.mode=hibernate
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Reduce dial-out time
ro.telephony.call_ring.delay=0
# Allow purge of assets to free more ram
persist.sys.purgeable_assets=1
# More free ram and apps load faster
dalvik.vm.dexopt-flags=m=y
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
ro.config.low_ram.mod=true
# Increase general Performance
debug.performance.tuning=1
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
persist.sys.NV_FPSLIMIT=60
ro.debuggable=1
ro.min_pointer_dur=8
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# Reduce the black screen time of the proximity sensor
ro.lge.proximity.delay=25
mot.proximity.delay=25
# TOUCH
touch.presure.scale=0.001
# Better Scrolling responsiveness and speed
windowsmgr.max_events_per_sec=150
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
# Smoothens UI
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
ro.ril.enable.a52=1
ro.ril.enable.a53=0
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=8m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Force launcher into memory
ro.HOME_APP_ADJ=1
# Disable Bytecode Verification
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=m=y,v=n,o=v
#dalvik.vm.dexopt-flags=m=y,v=n,o=v,u=n
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Disable Error reporting and logs
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Disable Sending Usage Data
ro.config.nocheckin=1
# Fix some application issues (FC)
ro.kernel.android.checkjni=0
# MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds)
ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Better internet browsing & download speed
net.tcp.buffersize.default=6144,87380,1048576,6144 ,87380,524288
net.tcp.buffersize.wifi=524288,1048576,2097152,524 288,1048576,2097152
net.tcp.buffersize.umts=6144,87380,1048576,6144,87 380,524288
net.tcp.buffersize.gprs=6144,87380,1048576,6144,87 380,524288
net.tcp.buffersize.edge=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# 3G signal and speed tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# CRT
persist.sys.screen_off=crt
persist.sys.screen_on=none
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=180
net.ipv4.tcp_fack=1
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu # Disable hardware overlays and use GPU for screen compositing
# Disable logcat
logcat.live=disable
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=15
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=0
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Sorry for the noob question, what is the advantages of using this ? Thanks anyhow, any rom will do ?
Aluyi said:
Sorry for the noob question, what is the advantages of using this ? Thanks anyhow, any rom will do ?
Click to expand...
Click to collapse
U can use it in any rom u want & my tweaks its explain what advantage if u use it when its begin with #.... u can see it bro
Sent from my SM-G900F using Tapatalk
thereassaad said:
U can use it in any rom u want & my tweaks its explain what advantage if u use it when its begin with #.... u can see it bro
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Oh boy that was fast, thanks man you the greatest.:good:
Hi. Can't we gave a tweak for home (hard button) button responsevness. It's tkaes time compelared to when we press a soft button.
Any Tweak at all ?
Thanks
Richard_10 said:
Hi. Can't we gave a tweak for home (hard button) button responsevness. It's tkaes time compelared to when we press a soft button.
Any Tweak at all ?
Thanks
Click to expand...
Click to collapse
if u mean responsevness add this line to ur build.prop
# Better Scrolling responsiveness and speed
windowsmgr.max_events_per_sec=150
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
Sent from my SM-G900F using Tapatalk
I know you said all note 3s can use... But to clarify can I use these on aosp based ROMs...and I'm on T-Mobile sm-n900t..thanks for this
---------- Post added at 04:47 PM ---------- Previous post was at 04:03 PM ----------
And another question do I have to add # in the beginning
mlock420 said:
I know you said all note 3s can use... But to clarify can I use these on aosp based ROMs...and I'm on T-Mobile sm-n900t..thanks for this
---------- Post added at 04:47 PM ---------- Previous post was at 04:03 PM ----------
And another question do I have to add # in the beginning
Click to expand...
Click to collapse
U can add to ur aosp based rom at ur responsibility I didnt test on aosp roms & make full backup okay & yeah add # in beginning on ur build.prop
Sent from my SM-G900F using Tapatalk
thereassaad said:
U can add to ur aosp based rom at ur responsibility I didnt test on aosp roms & make full backup okay & yeah add # in beginning on ur build.prop
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Thank you...
Is this how this is supposed to be set does the hash tag need space?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mlock420 said:
Is this how this is supposed to be set does the hash tag need space?
Click to expand...
Click to collapse
Its better if u add # for u may in future u need to change something so # may help u just if u wanted
Sent from my SM-G900F using Tapatalk
Most of them doesn't exist in Android's source codes. Some of them should be added manually.
More free ram tweak is working perfectly. Thanks!!!!
King ov Hell said:
Most of them doesn't exist in Android's source codes. Some of them should be added manually.
Click to expand...
Click to collapse
Yeah added manually
thereassaad said:
Yeah added manually
Click to expand...
Click to collapse
King ov Hell said:
Click to expand...
Click to collapse
??
jhonm6060 said:
More free ram tweak is working perfectly. Thanks!!!!
Click to expand...
Click to collapse
Hey bro what mod u use for IOS7 signal & battery? ? Can u share me link ??
I select all tweak and paste into build.prop file on my Omega rom v21 and i get 1 reboot after boot into system i get message does i want activate safe mode wtf...than i delete few tweaks and for now work all without any reboots so i have question does can i like use all this tweaks in one rom is something wrong if any of tweaks writed two time in same build.prop???
BLiNKT said:
I select all tweak and paste into build.prop file on my Omega rom v21 and i get 1 reboot after boot into system i get message does i want activate safe mode wtf...than i delete few tweaks and for now work all without any reboots so i have question does can i like use all this tweaks in one rom is something wrong if any of tweaks writed two time in same build.prop???
Click to expand...
Click to collapse
Bro may not working all on ur rom so asking ur rom dev okay bro & yeah u can choose what u want to u use it then copy/paste to ur build.prop okay
thereassaad said:
Bro may not working all on ur rom so asking ur rom dev okay bro & yeah u can choose what u want to u use it then copy/paste to ur build.prop okay
Click to expand...
Click to collapse
What ROM are you using?
Hello Dear S4 users & Devs this is Build.prop Tweaks so copy/paste what u want to ur rom at the end of ur rom & may it's helping u & may no .. & also for DEVS so I hope it's helping u
Guys this may work on ur Rom & may not so some roms didn't work with this build.prop so asking ur Dev roms...
~~~> SUPPORTING LOLLIPOP <~~~
# thereassaad TWEAKS
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=300
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=1
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1 persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ro.telephony.call_ring.delay=0
ring.delay=0
# Other Tweaks:
ro.config.combined_signal=true
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.config.tima=0
ro.config.knox=0
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.sf.hw=1
debug.performance.tuning=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=12
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=10
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.use_data_netmgrd=true
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Modify MTU from 1500 to 1472 on 3G network for speeding up
ro.ril.set.mtu1472=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=16m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds)
ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Increase the volume steps in-call
ro.config.vc_call_steps=20
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
ro.media.enc.jpeg.quality=100
# Misc Tweaks (enables ADB service)
persist.service.adb.enable=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Rendering Tweaks
debug.composition.type=gpu
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=20
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# Better image quality, lower performance.
persist.sys.use_dithering=1
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# faster youtube?
ro.ril.hep=1
# Default Network Mode
ro.telephony.default_network=10
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# 3d performance
persist.android.strictmode=0
ro.secure=0
# For the default value of agps
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
#
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
htc.audio.alt.enable=0
htc.audio.hac.enable=0
# Other Tweaks
qemu.hw.mainkeys=1
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
ro.config.hw_new_wifitopdp=1
Minimum brightness of your screen
ro.lcd_min_brightness=20
#
ro.ril.gprsclass=10
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# Multi Users
fw.max_users=30
fw.show_multiuserui=1
#
debug.sf.hw=1
video.accelerate.hw=1
persist.sys.use_dithering=1
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.NV_FPSLIMIT=90
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode=hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=0
ro.ril.set.mtu1472=1
touch.presure.scale=0.001
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=300
persist.cust.tel.eons=1
# Power Saving Tweaks
pm.sleep_mode=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=1m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.composition.type=gpu
ro.max.fling_velocity=20000
ro.min.fling_velocity=18000
debug.performance.tuning=1
debug.kill_allocating_task=0
debug.overlayui.enable=1
debug.egl.profiler=1
debug.egl.hw=1
debug.sf.hw=1
hw3d.force=1
hw2d.force=1
force_hw_ui=true
persist.sys.purgeable_assets=1
persist.sys.use_dithering=1
ro.min_pointer_dur=1
debug.kill_allocating_task=0
persist.sys.ui.hw=1
ro.debuggable=1
ro.config.disable.hw_accel=false
ro.kernel.android.checkjni=0
ro.secure=0
ro.min_pointer_dur=1
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=220
power.saving.mode=1
ro.vold.umsdirtyratio=20
proximity_incall=enable
ro.config.hw_quickpoweron=true
usb_wakeup=enable
ro.config.hw_power_saving=true
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
debug.composition.type=hw
debug.sf.hw=1
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.vold.umsdirtyratio=20
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
video.accelerate.hw=1
power_supply.wakeup=enable
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
debug.gr.swapinterval=1
debug.kill_allocating_task=0
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
ro.debuggable=1
ro.min_pointer_dur=1
ro.min_pointer_dur=1
ro.wmt.blcr.enable=0
# 16bit Transparency
persist.sys.use_16bpp_alpha=1
#
# Screen recognizes only two fingers
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
# Remove FPS cap
debug.gr.swapinterval=0
# Qualcomm tweaks
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Enables MTP mode
persist.sys.usb.config=mtp
#For usb storage
ro.usb_host=1
#Simulate sdcard on /data/media
persist.fuse_sdcard=true
ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure=10
#Disable USB Debugging Popup
persist.adb.notify=0
# Bass audio props for Lolipop
tunnel.decode=false
lpa.use-stagefright=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resampler.quality=255
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
# Enable Quick Power-On mode to reduce boot-time
ro.config.hw_quickpoweron=true
# ButtonLight Always On - Remove # Below To Enable
ro.mot.buttonlight.timeout=0
# Enables 270 Degree Rotation
windowsmgr.support_rotation_270=true
Nice.... But I tried couple of them mentioned above.... Trust me they dont make a visible difference at all.....
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik
Thanks
--
Believes in Christ and you and your family will be safe of the Great day of Jehovah's wrath
I9505 Powered with Phoenix Rom v9.4 - Tamirda
GoogyMax Kernel v1.1.5 - Googy_anas
Philz touch Recovery - Philz
S5's S-view Cover service - Karkasss
Jehovah's Thunder Bootanimation - Pas2001
Bootanimation sound - Me
A lot of mods and stuff - Xda community
Thanks to all of you...
Different manufacturers use different parameters. I don't think this whole list is for Samsung exactly.
most funny options:
# Reduce the black screen time of the proximity sensor
ro.lge.proximity.delay=25 - this is for LG phones.
mot.proximity.delay=25 - this is for Motorola phones.
Works on any rom? AOSP? TW?
S4 - i9500
Pls update your tweaks for lollipop
Okay soon maybe tomorrow okay
Dear Bad Luck... Let’s break UP.
Thread UPDATED
Don't Pray For An Easy Life, Pray For The Strength To Endure A Difficult One.
plz build.prop fichier donlowd ??????
good job
thereassaad said:
Thread UPDATED
Don't Pray For An Easy Life, Pray For The Strength To Endure A Difficult One.
Click to expand...
Click to collapse
Hi mate.
Sorry for the question... But this line
dalvik.vm.dexopt-flags=m=v,o=y
Change for this
dalvik.vm.dexopt-flags=m=y
???
Why do people think that Google's engineers didn't understand what they programmed, and there is a better internet, faster and more professional device if you change some parameters? Ridiculous.
Is great .for all android devices !!
Lollipop and kernel s4 is very inestable and no sleep .in aokp the kernel is good ?no drine the battery .
@thereassad nice job , could you also post something for init.d? Universal ones i see some htc codes in your build.prop
HAYLCION said:
@thereassad nice job , could you also post something for init.d? Universal ones i see some htc codes in your build.prop
Click to expand...
Click to collapse
This build.prop tweaks make it for all phones & if u see some for other phones just left mate don't add it .. Anyway all of this tweaks working perfectly here .. & about init.d this days im so busy so maybe later ..
Sent from my SM-G9250 using Tapatalk
Well done ma frnd i found it as very useful information
thereassaad said:
This build.prop tweaks make it for all phones & if u see some for other phones just left mate don't add it .. Anyway all of this tweaks working perfectly here .. & about init.d this days im so busy so maybe later ..
Sent from my SM-G9250 using Tapatalk
Click to expand...
Click to collapse
Yeah i know , thank you these kinda stuffs are always useful..
Is it possible to change build.prop on the fly? I'm looking to have tasker increase wifi scan interval only when i'm connected to a network an have it back to normal when i'm not connected.
mic levels
I have a GT-i9295, which might not be too dissimiliar from the 950X devices?
Any chance you know how to increase the microphone volume, via Build.prop?
See this error description and my ideas:
microphone level low - configurable kernel for i9295 ?
https://forum.xda-developers.com/galaxy-s4-active/help/microphone-level-low-configurable-t3534549
Huge sorry for off-topic, but I am stuck here.
Thanks