Database Info

[Q] I9003 Froyo Rollback/People Facing Kernel Panic or Auto Shutdown/Restarting

hi guys. i had upgraded to xxkpe from froyo about a month ago and the phone worked flawlessly. now i upgraded to xxkph and then xxkpm. on both i face kernel panic or the phone automatically shuts down and enters in a bootloop. usually occurs while i am not actively using the phone. and this happens less on the day of the flashing and more on the next day.. and i have to usually reflash on the third day. i am sorry to create a new discussion portal here as i posted for help everywhere but no one really helped. so this is for those who are facing problems like me as i read on several fora that people are facing these problems.
PLEASE help us guys. it's really impossible to use the phone trying to restart it every 10 minutes. please help.
also, i am usually on xxkpe or xxkph (rooted using cf root).. what is the procedure to rollback to the 19003ddxxxx version of froyo. i have downloaded it but i am not sure.
please reply to this post someone as many of us need your help.
thank you.

Please keep questions in the general/Q&A section. This isn't development related.
Sent from the MIUI powered 3d

hi, did you find any solution to this? facing the same issue

ss03101991 said:
hi guys. i had upgraded to xxkpe from froyo about a month ago and the phone worked flawlessly. now i upgraded to xxkph and then xxkpm. on both i face kernel panic or the phone automatically shuts down and enters in a bootloop. usually occurs while i am not actively using the phone. and this happens less on the day of the flashing and more on the next day.. and i have to usually reflash on the third day. i am sorry to create a new discussion portal here as i posted for help everywhere but no one really helped. so this is for those who are facing problems like me as i read on several fora that people are facing these problems.
PLEASE help us guys. it's really impossible to use the phone trying to restart it every 10 minutes. please help.
also, i am usually on xxkpe or xxkph (rooted using cf root).. what is the procedure to rollback to the 19003ddxxxx version of froyo. i have downloaded it but i am not sure.
please reply to this post someone as many of us need your help.
thank you.
Click to expand...
Click to collapse
which cf root are you using?if you're overclocked, that's the problem. try going back to the original specs kernel first before downgrading to froyo...

Hi, thanks for the reply
1) what is 'original specs kernel"?
2) I had earlier gone from stock froyo->XXKPE->DXKP9 rooted/deodexed. Then i faced random bootloops (with factory reset). So yesterday i flashed XXKPE again (twice) and did factory reset/cache wipe. Things worked fine till today afternoon - gotten 3 kernel panics recently - not used anything apart from normal phone.
Any ideas on this ? How to go back to stock froyo (im from india) from XXKPE in case i need to go to samsung customer care ?

spm123123 said:
Hi, thanks for the reply
1) what is 'original specs kernel"?
2) I had earlier gone from stock froyo->XXKPE->DXKP9 rooted/deodexed. Then i faced random bootloops (with factory reset). So yesterday i flashed XXKPE again (twice) and did factory reset/cache wipe. Things worked fine till today afternoon - gotten 3 kernel panics recently - not used anything apart from normal phone.
Any ideas on this ? How to go back to stock froyo (im from india) from XXKPE in case i need to go to samsung customer care ?
Click to expand...
Click to collapse
Download XKB3, flash using pit and then files. Afterwards flash DDKB2

any idea what could cause the random bootloops/restarts ?
a lot of people are facing this issue, as ive read on this forum and elsewhere; however, i cannot believe that firmware flashing could cause hardware failure.
after flashing to xxkpe, no bootloops - got 3 kernel panics - one of which was preceded by "USB storage removed unexpectedly". I formatted USB and SD card storage and no bootloops/kernel panics so far.
Hoping to get 2/3 days w/o bootloops/kernel panics. Running out of options though. Any ideas?
EDIT: other option would be to exchange for a new nexus s/galaxy s (shopkeeper won't know of the issues )

ss03101991 said:
hi guys. i had upgraded to xxkpe from froyo about a month ago and the phone worked flawlessly. now i upgraded to xxkph and then xxkpm. on both i face kernel panic or the phone automatically shuts down and enters in a bootloop. usually occurs while i am not actively using the phone. and this happens less on the day of the flashing and more on the next day.. and i have to usually reflash on the third day. i am sorry to create a new discussion portal here as i posted for help everywhere but no one really helped. so this is for those who are facing problems like me as i read on several fora that people are facing these problems.
PLEASE help us guys. it's really impossible to use the phone trying to restart it every 10 minutes. please help.
also, i am usually on xxkpe or xxkph (rooted using cf root).. what is the procedure to rollback to the 19003ddxxxx version of froyo. i have downloaded it but i am not sure.
please reply to this post someone as many of us need your help.
thank you.
Click to expand...
Click to collapse
do not waste time go to sumsung and get the phone replaced or the main board changed see this thread
http://forum.xda-developers.com/showthread.php?t=1324452

Urgent help requested
supergaijin said:
which cf root are you using?if you're overclocked, that's the problem. try going back to the original specs kernel first before downgrading to froyo...
Click to expand...
Click to collapse
I had earlier applied CF-ROOT (using ganeshbiyer's thread) on DXKP9 but faced issues so did a FULL reflash to XXKPE but have since been facing issues.
Once a full reflash (using 4 files) is done, the earlier CF-root/deodex related changes are wiped out, right? im currently on xxkpe but facing numerous kernel panics (preceded by USB storage unexpectedly removed) and plan to go back to stock froyo.
please advise? Also, what is 'original specs kernel' ?

spm123123 said:
I had earlier applied CF-ROOT (using ganeshbiyer's thread) on DXKP9 but faced issues so did a FULL reflash to XXKPE but have since been facing issues.
Once a full reflash (using 4 files) is done, the earlier CF-root/deodex related changes are wiped out, right? im currently on xxkpe but facing numerous kernel panics (preceded by USB storage unexpectedly removed) and plan to go back to stock froyo.
please advise? Also, what is 'original specs kernel' ?
Click to expand...
Click to collapse
original specs is stock, overclocked is not stock. since you're not saying you used an overclocked kernel, then the other things that have been suggested would be best to try to fix your issue

guys it was a manufacturing defect. got it repaired on warranty! the motherboard and the LCD were replaced.
flashed to XXKPE the day i got my phone back. no such issue. it's been 3 months!

ss03101991 said:
hi guys. i had upgraded to xxkpe from froyo about a month ago and the phone worked flawlessly. now i upgraded to xxkph and then xxkpm. on both i face kernel panic or the phone automatically shuts down and enters in a bootloop. usually occurs while i am not actively using the phone. and this happens less on the day of the flashing and more on the next day.. and i have to usually reflash on the third day. i am sorry to create a new discussion portal here as i posted for help everywhere but no one really helped. so this is for those who are facing problems like me as i read on several fora that people are facing these problems.
PLEASE help us guys. it's really impossible to use the phone trying to restart it every 10 minutes. please help.
also, i am usually on xxkpe or xxkph (rooted using cf root).. what is the procedure to rollback to the 19003ddxxxx version of froyo. i have downloaded it but i am not sure.
please reply to this post someone as many of us need your help.
thank you.
Click to expand...
Click to collapse
im facing same problem pls let me know if u get solution for this problem

Removing ClockWorkMod recovery

Hi guys, I need your help!
Yesterday I updated my phone from Froyo 2.2 to Gingerbread 2.3.5 with Kies, then I rooted it trough Odin and flashed the recovery with ClockWorkMod recovery (i followed the guide, and made everything it asked to do). I completed the task succesfully. But here comes the problems:
I turned the phone on and I wanted to use Wi-Fi connection but I couldn't! It was just saying "error" and in settings the MAC address was unavaiable. I found something on the web, like trying to dial *#*#526#*#* but it didn't work too ("Driving loading unsuccessful").
So I wanted to bring the phone back to the previous state, So i unrooted it (succesfully) but now I'm stuck with this ClockWorkMod recovery and I can't find a way to restore the original Samsung i9003 recovery because i can't find it anywhere and I don't even know if I can use another Samsung's one.
I tought that maybe reinstalling Gingerbread from zero could fix this problem, but I'm not even sure of that, neither on how to reinstall it. Damn, I'm truly an Android n00b
Thanks to everyone that will spend some time helping me!
If it can help, here some infos about my phone
I9003XXPN
Kernel Version: 2.6.35.7-CL482273 [email protected]#1
Version build: GINGERBREAD.XIKP2
Click to expand...
Click to collapse

marvin_kk said:
Hi guys, I need your help!
Yesterday I updated my phone from Froyo 2.2 to Gingerbread 2.3.5 with Kies, then I rooted it trough Odin and flashed the recovery with ClockWorkMod recovery (i followed the guide, and made everything it asked to do). I completed the task succesfully. But here comes the problems:
I turned the phone on and I wanted to use Wi-Fi connection but I couldn't! It was just saying "error" and in settings the MAC address was unavaiable. I found something on the web, like trying to dial *#*#526#*#* but it didn't work too ("Driving loading unsuccessful").
So I wanted to bring the phone back to the previous state, So i unrooted it (succesfully) but now I'm stuck with this ClockWorkMod recovery and I can't find a way to restore the original Samsung i9003 recovery because i can't find it anywhere and I don't even know if I can use another Samsung's one.
I tought that maybe reinstalling Gingerbread from zero could fix this problem, but I'm not even sure of that, neither on how to reinstall it. Damn, I'm truly an Android n00b
Thanks to everyone that will spend some time helping me!
If it can help, here some infos about my phone
Click to expand...
Click to collapse
Now, Do you want a guide on how to re-flash back to Gingerbread using ODIN? If so,It is here. And, I would like to tell you that on re-flashing the FW, you are going to void your warranty and you will be able to get rid of the CWM
Hope it helped you!

hi OP
I'm facing the same problem as you, right now waiting for dxkp9 download and reflash with Odin.
But if you somehow manage to solve this issue please share.

Hi!
I tried and I tried and I solved it! I flashed back the stock rom of I9003 with Gingerbread trough Odin. This removed ClockWorkMod and restored the phone as it was in the beginning. Problem solved, original recovery mode and wi-fi finally works!

marvin_kk said:
Hi!
I tried and I tried and I solved it! I flashed back the stock rom of I9003 with Gingerbread trough Odin. This removed ClockWorkMod and restored the phone as it was in the beginning. Problem solved, original recovery mode and wi-fi finally works!
Click to expand...
Click to collapse
+1 [Reflash, and CF-root without 'extras' and restore]

[Q] My samsung s2 is stuck at the logo please help.

i just downloaded the rom ressurction jelly bean and everything was fine until it had to reboot and then it got stuck at the logo of samsung galaxy s2 please anyone who can help answer

ASohil said:
i just downloaded the rom ressurction jelly bean and everything was fine until it had to reboot and then it got stuck at the logo of samsung galaxy s2 please anyone who can help answer
Click to expand...
Click to collapse
you shud reset the phone by entering in recovery menu.

This is why a Nandroid Backup is recommended prior to flashing anything. If you are getting bootloops it could be many things, I personally haven't owned a Sammy in a few years, but with HTC products if you are not running the right bootloader some ROMs won't boot (EX Sense based ICS ROMs require hboot 1.58). Restore your Nandroid and double check to see if you have the right bootloader/firmware running...hope this helps
*EDIT* I believe I found the right ROM (This post here?) It says its based on the latest firmware.
firmware XXKI3 Gingerbread 2.3.5
Click to expand...
Click to collapse
If you are on Sprint, you may be bootlooping because the ROM appears to be for the GSM variant, more details would help. If you are in fact on the GSM variant heres is a link with a GUIDE to help you flash the latest firmware

[Q](solved) Stuck on boot loop after several different jb roms

I recently bought my girlfriend a galaxy s II skyrocket. I own one myself. I updated my phone successfully and easily to jellybean through the official CM10. I am well aware of the different methods to install different custom roms to your phone. I received my girlfriend's phone with stock gingerbread. I proceeded to install the stock ice cream sandwich update to the phone through Odin. It was successful. I also installed ClockWorkMod recovery into her phone, the exact same one I had. I continued to attempt to install the same rom that I had on my phone, to my girlfriends phone, CM10. CWM said it was a successful installation after the careful 3x: Factory reset, Cache, Dalvik Cache. Upon rebooting of the phone however, the phone would fail to successfully turn on. It would stay in boot loop mode forever. One time I even left it for an hour and there it was, the boot screen I so dreadfully began to hate. I gave up on CM10, so i began to look for other prospects of a rom. I discovered slim bean. I installed it into my original phone to test it and found it to be of great quality. After I followed the exact same steps I followed to install slim bean to my original phone, to my girlfriends phone, the same result came about; boot loop. After about 20 tries, seriously, I tried to find yet another prospect of a rom. I also discovered another slimmer version of jelly bean for the Skyrocket. Even after the careful following of the steps, I encountered the same result; boot loop. I am beyond frustrated at this point at the fact that I am holding two phones exactly the same, yet when I attempt to install the rom, it only works on one of them. They are both Samsung Galaxy S II Skyrockets model numbers 1727. Both based off of At&t in the United States. One is white while the other one is black. If it makes any bit of a difference the phone I am having trouble with is white. I need help. I've tried everything with no success. I am trying to update this phone to jellybean but it does not seem to accept it, and I have no idea why

Re: [Q] Stuck on boot loop after several different jb roms
TLDR condense give important details that's it
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

mtdew said:
TLDR condense give important details that's it
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Sorry, I am not yet familiar with all the terms. It seems like jargon to me at times lol. TLDR Condense?

Re: [Q] Stuck on boot loop after several different jb roms
Nobody knows what version of cwm you're on.
Nobody knows where you're dl'ing cm10 from.
Quit wiping 3x you only need to do it once.
Don't write novels.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
---------- Post added at 03:10 AM ---------- Previous post was at 03:09 AM ----------
Tldr means to long didn't read
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

mtdew said:
Nobody knows what version of cwm you're on.
Nobody knows where you're dl'ing cm10 from.
Quit wiping 3x you only need to do it once.
Don't write novels.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
---------- Post added at 03:10 AM ---------- Previous post was at 03:09 AM ----------
Tldr means to long didn't read
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I've tried installing Official CM10.1 (from XDA) with boot loop result. I've tried installing unofficial 4.2.2 slimbean (from XDA) with boot loop result. I've tried installing Skyjellybean 4.1.2 update 11.4 (from XDA) with boot loop result, and finally I've tried installing Superlite CM10 JB 4.1.2 v8.0 (from XDA) with boot loop result as well. I am currently on stock Ice cream sandwich installed through Odin (links and all found from XDA)

Agree with mtdew.
Keep it as short as possible and be specific.
Get CM10 (not CM10.1 as it's still unstable) from http://get.cm/?device=skyrocket .
Also try latest CWM http://forum.xda-developers.com/showthread.php?t=1777970 .

lingowistico said:
Agree with mtdew.
Keep it as short as possible and be specific.
Get CM10 (not CM10.1 as it's still unstable) from http://get.cm/?device=skyrocket .
Also try latest CWM http://forum.xda-developers.com/showthread.php?t=1777970 .
Click to expand...
Click to collapse
I discovered the issue! Even if it was the same recovery as my other phone i used to install these updates successfully, it was the recovery that was broken. I installed a different version the latest "touch" version of Clockworkmod and to my surprise, the update was successful. I am running 4.2.2 unofficial slimbean! Thanks guys, for your help.

s3rgioru3las said:
I discovered the issue! Even if it was the same recovery as my other phone i used to install these updates successfully, it was the recovery that was broken. I installed a different version the latest "touch" version of Clockworkmod and to my surprise, the update was successful. I am running 4.2.2 unofficial slimbean! Thanks guys, for your help.
Click to expand...
Click to collapse
That is good news, i'm glad it worked out for you. Good luck. :good:

Help
s3rgioru3las said:
I discovered the issue! Even if it was the same recovery as my other phone i used to install these updates successfully, it was the recovery that was broken. I installed a different version the latest "touch" version of Clockworkmod and to my surprise, the update was successful. I am running 4.2.2 unofficial slimbean! Thanks guys, for your help.
Click to expand...
Click to collapse
I too Have a Bad Recovery . Every time i try to install ANY jellybean rom i get stuck in boot loop . I Tried different recovery's and different rom's and stock jellybean and no success . But any ics or gingerbread installs normally . I have a epic 4g touch galaxy 2 and it's rooted . Any new idea's what it could be or how to fix it ? I feel i'm the only person with this problem since i cant find anyone else with the same situation . Your the closets to my problem

Cisco408ca said:
I too Have a Bad Recovery . Every time i try to install ANY jellybean rom i get stuck in boot loop . I Tried different recovery's and different rom's and stock jellybean and no success . But any ics or gingerbread installs normally . I have a epic 4g touch galaxy 2 and it's rooted . Any new idea's what it could be or how to fix it ? I feel i'm the only person with this problem since i cant find anyone else with the same situation . Your the closets to my problem
Click to expand...
Click to collapse
Use the latest recovery in your forum
Sent from my HTC One using Tapatalk 4

[Q] Boot loop

Hi guys,
My son of 9 wanted a telephone so I bought him a LG P920 3D because I can't afford a new one now. I wanted to install CyanogenMod cm-10-20131006-NIGHTLY-p920 and gapps-jb-20121011-signed. I have done it before with my own phone (S3) and tablet (TF101) and that went just fine.
Now with my son's phone something went wrong. It's now only showing the round CyanogenMod logo which keeps spinning and nothing more.
I especially bought ClockworkMod Touch Recovery to flash it with. Please help me because my little boy is very dissapointed and he got a present, a car you can control wireless with a phone and that was the reason why I wanted to flash it. So he could play with his new toy.
I did a factory reset so I started flashing with a clean phone. Please help me!

First install ICS V30A baseband use this video (you may need to go in to the stock recovery after flashing and do a factory reset is a problem arises during flashing)
https://www.youtube.com/watch?v=FqC5qw6WRaY&feature=youtube_gdata_player
secound install WKparts bootloader and TWRP you can use a tool om this forum named simple tool can be found here everything you need is in the tool
https://www.dropbox.com/sh/p959msww1ol04s4/BUlrkRLEs7
and then load a rom on to the external SD card and flash it in TWRP or CWM touch i recomend
http://forum.xda-developers.com/showthread.php?t=2164367
if you want the newest CM although it's a bit more hassle with this 4.2.2 pacman rom as you need to delete the first line in updater script for it to work properly on ICS

@sioxz
thanks for your response but after a while I found out that I had to hold on the volume down (and not up!) + power + 3D button. I've read somewhere volume up so ofcourse nothing happened. Finally back in recovery I could flash again another rom and that went fine. But now I have another problem and that is I don't have a baseband version.
So no 3G!! What do I have to do to get a baseband?? I really have no idea, I've search everywhere but I couldn't find anything.

@sioxz
thanks for your response but after a while I found out that I had to hold on the volume down (and not up!) + power + 3D button. I've read somewhere volume up so ofcourse nothing happened. Finally back in recovery I could flash again another rom and that went fine. But now I have another problem and that is I don't have a baseband version.
So no 3G!! What do I have to do to get a baseband?? I really have no idea, I've search everywhere but I couldn't find anything.
This what I have flashed:
Kernel-versie
3.0.21-CM+
CyanogenMod versie
10-20130908-NIGHTLY-p920
Build datum
Sun Sep 8 11:42:08 PDT 2013
Buil-nummer
cm-920-userdebug 4.1.2 JZO54K eng.
jenkins.20130908.114141 test-keys

i don't know where you can flash only the base band but the V30A haves baseband in it and it makes to that you have to flash the custom bootloader which works really good (can boot anything)

You can flash baseband with LG Flash Tool.

drastic00 said:
You can flash baseband with LG Flash Tool.
Click to expand...
Click to collapse
Can you please tell me how, step-by-step. I've read some tutorials here but they are so not easy to read because they always use so many different colors and fonts it becomes hard for me to understand what they are saying.

Mine is about as clear and detailed as you will find
http://forum.xda-developers.com/showthread.php?t=2195753

CyanogenMod NIGHTLY-p920 unstable
Gilbertvanhaasen said:
Hi guys,
My son of 9 wanted a telephone so I bought him a LG P920 3D because I can't afford a new one now. I wanted to install CyanogenMod cm-10-20131006-NIGHTLY-p920 and gapps-jb-20121011-signed. I have done it before with my own phone (S3) and tablet (TF101) and that went just fine.
Now with my son's phone something went wrong. It's now only showing the round CyanogenMod logo which keeps spinning and nothing more.
I especially bought ClockworkMod Touch Recovery to flash it with. Please help me because my little boy is very dissapointed and he got a present, a car you can control wireless with a phone and that was the reason why I wanted to flash it. So he could play with his new toy.
I did a factory reset so I started flashing with a clean phone. Please help me!
Click to expand...
Click to collapse
CyanogenMod NIGHTLY-p920 unstable .
look & flash this rom http://forum.xda-developers.com/showthread.php?t=2337545