I have a Galaxy S II running the UCLE2 ICS Leak, I love the phone but there are many times I'm in a area with a real weak LTE Signal but a great HSPA Signal and times I'm in a 2G Only Area.
I know that the AT&T Modem is Locked so you can't switch off LTE or set it to 2G Only, If I got the Unlock code would that also remove the Rat lock? if not can you use a Rogers Radio on a AT&T Rom?
Thanks
No removing the sim lock will not help i believe the only radio that is unlocked is the rogers KJ7. Not sure what rom your using but some have a selection in the network screen i am using ChimeraVsSkyrocket_Beta2 and it has that option sorry i was trying to get you a screen shot but the usual buttons are not working
So is it safe to flash the rogers radio with me being the AT&T Radio?
If I flash the Rogers Radio with the AT&T APN's Should everything work as normal?
And If I decided to go back to UCLE2 Radio is it you like your basic flash with CWM or would I need to do the Samsung 1 Click to restore the phone to stock?
Thanks so much for your help
Rogers radio will work with att... though signal and speeds will be different. maybe better, maybe worse. its different for everyone.
and it will only work if the rom you are using has the option in it. such as a rogers rom or some other custom roms.
and flashing back to ucle is through cwm. exact same as when you flash the rogers radio...
i'd try the new rogers radio if i were you. it should be RAT unlocked. i get drastically better signal over every other radio (though i am a rogers user).
you may need to switch roms though. if thats the case i'd advise using the chimera rom. since its confirmed to have it. (not very many AT&T roms do.)
The latest rogers modem works with SKY ICS. I flashed it but the signal sucked so I went back to ULALC4(Best for me). Not sure if this is what your looking for but theres an options in your wireless network settings that allows you to use only your 2G networks. Actally has a sub title the suggests it saves battery. Might wanna check it out.
Recently I bought a Samsung Galaxy S2 Skyrocket from AT&T, along with a Net10 SIM card. Everything works, but the data is unreliable. At home (10 miles from Harrisburg, PA), I have a five bar signal, but the internet works on and off. Even when I have the 4G icon on my phone, the internet does not always load. I have (best) coverage in my area, too. I have searched forums, and contacted customer support, and did not find any useful help. I have tried several APN configurations, and my modem ICS is the latest as far as I know (UCLI3), unless if I have a leaked version. Should I downgrade my ICS, upgrade to the leaked ICS, or root my phone? Is there anything I can do?
yevy1234 said:
Recently I bought a Samsung Galaxy S2 Skyrocket from AT&T, along with a Net10 SIM card. Everything works, but the data is unreliable. At home (10 miles from Harrisburg, PA), I have a five bar signal, but the internet works on and off. Even when I have the 4G icon on my phone, the internet does not always load. I have (best) coverage in my area, too. I have searched forums, and contacted customer support, and did not find any useful help. I have tried several APN configurations, and my modem ICS is the latest as far as I know (UCLI3), unless if I have a leaked version. Should I downgrade my ICS, upgrade to the leaked ICS, or root my phone? Is there anything I can do?
Click to expand...
Click to collapse
I would downgrade to ics and start trying out multiple radios and apns ucli3 for me did help in anyway if that doesnt work I would go even down gb good luck is allbi can say but net10 from what i hear isnt the awesome its like more like 1/2 3g
Sent from my SAMSUNG-SGH-I727 using xda premium
Net10
crashpsycho said:
I would downgrade to ics and start trying out multiple radios and apns ucli3 for me did help in anyway if that doesnt work I would go even down gb good luck is allbi can say but net10 from what i hear isnt the awesome its like more like 1/2 3g
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I have a Samung Galaxy Proclaim from Net10 that gets up to 3 Mbps on 3G in my area, which is enough for me. It's pretty annoying when I look at my Galaxy S2 Skyrocket, and it's not loading or lagging at 200kbps.
UCLF6
I downgraded to the uclf6 modem, which sped up the data connection by a little, but not much. I'll try downgrading even more.
I have tried the two new leaks for the ICS modem, which were UCLK4 and UCLL3. Both modem versions were unstable. What I will stick to is the Telus SGH-T989D modem update, which had proven to be the most stable and beneficent results. Thank you for all of your help!
Sorry if this has been posted somewhere else but I did a bunch of searching and couldn't find anything that explained what I'm looking for. Just got the Skyrocket and I'm trying to disable the LTE. 4G is awesome but I'd like to conserve my battery as much as possible and I don't need the super awesome speeds when the phone is just sitting my pocket while I'm at work. I've looked at a few different ROMs, both ICS and JB, and with the stock radio (UCLI3) I can't tick the check box for 'Use 2G Networks Only'. It checks then unchecks and then grays out. I tried a few different radios too, UCLL3, UCLK4, UXLF3, and a radio for Bell for the I757 that I suddenly can't find the info for. All of them work and give me 4G just none of them work with my ROMs to let me use just EDGE.
So far the ROMs I've tried is the new Dirty Unicorn JB ROM, AOKP ICS, and CM9.1 which I believe is also ICS. What am I missing? The last phone I used I didn't have to mess with any radios so this is all new to me. In short, what radio do I need to make this work with the ROMs I've already tried or can I get a recommendation on a ROM/Radio setup that accomplishes this? I'd prefer a ROM that is AOSP since I'm not really a fan of TouchWiz (It just doesn't feel right for some reason).
Did you try going in settings to mobile network click on mobile network mode and change the setting to gsm only? That should give you up to hspa and hspa+ for data speeds. As for using just EDGE I can't help you with that...sorry.
Sent from my SAMSUNG-SGH-I727 using xda premium
TheRandomizedGuy said:
Sorry if this has been posted somewhere else but I did a bunch of searching and couldn't find anything that explained what I'm looking for. Just got the Skyrocket and I'm trying to disable the LTE. 4G is awesome but I'd like to conserve my battery as much as possible and I don't need the super awesome speeds when the phone is just sitting my pocket while I'm at work. I've looked at a few different ROMs, both ICS and JB, and with the stock radio (UCLI3) I can't tick the check box for 'Use 2G Networks Only'. It checks then unchecks and then grays out. I tried a few different radios too, UCLL3, UCLK4, UXLF3, and a radio for Bell for the I757 that I suddenly can't find the info for. All of them work and give me 4G just none of them work with my ROMs to let me use just EDGE.
So far the ROMs I've tried is the new Dirty Unicorn JB ROM, AOKP ICS, and CM9.1 which I believe is also ICS. What am I missing? The last phone I used I didn't have to mess with any radios so this is all new to me. In short, what radio do I need to make this work with the ROMs I've already tried or can I get a recommendation on a ROM/Radio setup that accomplishes this? I'd prefer a ROM that is AOSP since I'm not really a fan of TouchWiz (It just doesn't feel right for some reason).
Click to expand...
Click to collapse
In order to disable $g and swich to 3g or 2g i could be wrong but after reading around you must have a RAT unlocked Radio like one from Rogers not ATT and and SIM Unlocked now this coming directly from other threads if you do a search on skyrocket 3g you will see multiple
http://forum.xda-developers.com/showthread.php?p=31056082#post31056082
good source also
http://forum.xda-developers.com/showpost.php?p=27806326&postcount=4
I dont know if these will work on the New Jelly Beans U will have to find out on your own
crashpsycho said:
In order to disable $g and swich to 3g or 2g i could be wrong but after reading around you must have a RAT unlocked Radio like one from Rogers not ATT and and SIM Unlocked now this coming directly from other threads if you do a search on skyrocket 3g you will see multiple
http://forum.xda-developers.com/showthread.php?p=31056082#post31056082
good source also
http://forum.xda-developers.com/showpost.php?p=27806326&postcount=4
I dont know if these will work on the New Jelly Beans U will have to find out on your own
Click to expand...
Click to collapse
Good reading! Thanks
Sent from my SAMSUNG-SGH-I727 using xda premium
crashpsycho said:
In order to disable $g and swich to 3g or 2g i could be wrong but after reading around you must have a RAT unlocked Radio like one from Rogers not ATT and and SIM Unlocked now this coming directly from other threads if you do a search on skyrocket 3g you will see multiple
http://forum.xda-developers.com/showthread.php?p=31056082#post31056082
good source also
http://forum.xda-developers.com/showpost.php?p=27806326&postcount=4
I dont know if these will work on the New Jelly Beans U will have to find out on your own
Click to expand...
Click to collapse
I believe the UXLF3 Radio is RAT Unlocked and that's the one I'm using now with Cyanogenmod 9.1 and I managed to get it to use 2G only. Not sure why it wasn't working with AOKP which is also ICS. I'm not sure if there are any RAT Unlocked radios for Jellybean yet but now that I've got it working I'm afraid to try any other ROMs lol
All this radio stuff is still making cross eyed though. I feel like someone needs to do a really good write up explaining it because it's not easy to wrap your head around if you've never had to mess with it.
Hi
I just bought an unlocked i727 (AT&T Skyrocket). In addition to unlocking it, the previous owner also modded the phone to work on AWS bands (HSDPA 1700/2100). I was all impressed by this feat, but now that I come to XDA, I find all the guy probably really did is flash the radio, which probably both unlocked the phone and enabled AWS (explained here: http://forum.xda-developers.com/showthread.php?t=2029650). Currently in "About phone", the Build Number is IMM76D.UCLF6 and the Baseband version says unknown.
The phone is running stock Android 4.0.4 (ICS), and I want to put on the latest CM10.1 stable build, but when I go to this page, it says I need a Jelly Bean radio: http://www.teamchopsticks.org/p/cm101-release-notes2.html
So now I'm worried that if I choose the wrong radio, I'll no longer have AWS bands, which I need since those are the only bands my carrier (Mobilicity) uses. Can someone please tell me which of the radios listed on the teamchopsticks blog I should use to keep the AWS bands on CM10? I'm guessing its the T-mobile version (UVMC6)...?
Thanks!
Edit: Alternatively, could I just install CM9 and leave the current radio as is? I don't really care if I have the latest android version, I just want to get rid of the stock AT&T rom and its associated bloatware.
Sandmonkee said:
Hi
I just bought an unlocked i727 (AT&T Skyrocket). In addition to unlocking it, the previous owner also modded the phone to work on AWS bands (HSDPA 1700/2100). I was all impressed by this feat, but now that I come to XDA, I find all the guy probably really did is flash the radio, which probably both unlocked the phone and enabled AWS (explained here: http://forum.xda-developers.com/showthread.php?t=2029650). Currently in "About phone", the Build Number is IMM76D.UCLF6 and the Baseband version says unknown.
The phone is running stock Android 4.0.4 (ICS), and I want to put on the latest CM10.1 stable build, but when I go to this page, it says I need a Jelly Bean radio: http://www.teamchopsticks.org/p/cm101-release-notes2.html
So now I'm worried that if I choose the wrong radio, I'll no longer have AWS bands, which I need since those are the only bands my carrier (Mobilicity) uses. Can someone please tell me which of the radios listed on the teamchopsticks blog I should use to keep the AWS bands on CM10? I'm guessing its the T-mobile version (UVMC6)...?
Thanks!
Edit: Alternatively, could I just install CM9 and leave the current radio as is? I don't really care if I have the latest android version, I just want to get rid of the stock AT&T rom and its associated bloatware.
Click to expand...
Click to collapse
You can't unlock the operator lock with a radio. You need both a specific radio and a specific firmware.
AWS support is not a special feature that can be enabled, afaik it's a standard function of this phone.
The Radios made specifically for this phone (Rogers & AT&T) should have full AWS support, I don't know about the others.
Also the TeamChopsticks site is mighty dated.
You should check out the official threads in General and Development.
Also these links are always good to have:
http://get.cm/?device=skyrocket
http://10.1.cmxlog.com/?device=skyrocket
http://changelog.bbqdroid.org/#/skyrocket/next
Hmmm... well do you know if its true that CM10 requires a "Jelly Bean Radio"?
Or am I better off just loading CM9? That way I shouldn't have to modify the radio, right?
Thanks!
Sandmonkee said:
Hmmm... well do you know if its true that CM10 requires a "Jelly Bean Radio"?
Or am I better off just loading CM9? That way I shouldn't have to modify the radio, right?
Thanks!
Click to expand...
Click to collapse
You could try flashing CM9, then it might even say in what radio you have.
Yes, CM10 requires a Jellybean radio.
If you flash the Rogers radio in my signature or the AT&T radio you'll still have AWS and it won't relock your phone.
There's really no reason not to flash a JB radio and CM10.1.. you're not losing out on anything by doing it.
Official JB radios:
R UXUMA7 http://forum.xda-developers.com/showpost.php?p=38195641&postcount=44
UCMC1 http://forum.xda-developers.com/showthread.php?t=2228292
CM10.1 Discussion http://forum.xda-developers.com/showthread.php?t=2138102
CM10.1 Development http://forum.xda-developers.com/showthread.php?t=2138102
Good luck!
lingowistico said:
You could try flashing CM9, then it might even say in what radio you have.
Yes, CM10 requires a Jellybean radio.
If you flash the Rogers radio in my signature or the AT&T radio you'll still have AWS and it won't relock your phone.
There's really no reason not to flash a JB radio and CM10.1.. you're not losing out on anything by doing it.
Official JB radios:
R UXUMA7 http://forum.xda-developers.com/showpost.php?p=38195641&postcount=44
UCMC1 http://forum.xda-developers.com/showthread.php?t=2228292
CM10.1 Discussion http://forum.xda-developers.com/showthread.php?t=2138102
CM10.1 Development http://forum.xda-developers.com/showthread.php?t=2138102
Good luck!
Click to expand...
Click to collapse
AWS band in HSDPA (or HSPA+) is not enabled in at&t or Roger's radios,since those 2 networks don't use it for HSDPA.. It's used for LTE (700,1700/2100)
AWS 1700/2100 band in HSDPA can be enabled by flashing T-Mobile blaze JB radio...It should work on cm10.1 since it is a JB radio...
So I spent pretty much all of yesterday reading up on the subject. Since we were under a tornado watch all day anyways, I really had nothing else to do!
After a while, I found the "secret codes" (listed here: http://forum.xda-developers.com/showthread.php?t=1492700), and punched in *#1234#. This told me that my radio was "T769-UVLB7", which I believe is the 4th one from the bottom on this page: http://forum.xda-developers.com/showthread.php?t=1895400, ie the Blaze radio. That would make sense because it gels with my Android version (4.0.4). Anyways, googling that radio eventually led me to this link: http://forum.xda-developers.com/showthread.php?t=1507825 which had a ton of useful information. So thats the radio mystery solved.
From the same info screen, I could see that my ROM was i727-UCLF6, a somewhat outdated stock ICS rom. So now I know what my phone's current status is in case I need to bring it back because my other combinations don't work for some reason.
So I think I've decided to go with the Pacman JB rom (http://forum.xda-developers.com/showthread.php?t=2178402) and if it doesn't work with my current radio, I'll first try the updated Blaze radio, UVMB1, listed third in that same list I linked to above. If that doesn't work, I'll try the others in that list until I get a combination that does (probably starting with UCMC1). I'm also considering the Jedi Mind Trick T989 rom (http://forum.xda-developers.com/showthread.php?t=1818305). I'll post results when I have them!
Thanks for the help everyone!
mahanddeem said:
AWS band in HSDPA (or HSPA+) is not enabled in at&t or Roger's radios,since those 2 networks don't use it for HSDPA.. It's used for LTE (700,1700/2100)
AWS 1700/2100 band in HSDPA can be enabled by flashing T-Mobile blaze JB radio...It should work on cm10.1 since it is a JB radio...
Click to expand...
Click to collapse
So what you're saying is: AWS for LTE is enabled in Rogers and AT&T, but, it's disabled for HSPA by default.
I was under the impression that 2100 is used for 3G/HSPA by default eitherway, but you're saying it's not?
mahanddeem said:
AWS band in HSDPA (or HSPA+) is not enabled in at&t or Roger's radios,since those 2 networks don't use it for HSDPA.. It's used for LTE (700,1700/2100)
AWS 1700/2100 band in HSDPA can be enabled by flashing T-Mobile blaze JB radio...It should work on cm10.1 since it is a JB radio...
Click to expand...
Click to collapse
Didn't notice any difference after flashing Blaze LB7 radio. Vodafone has 2100 for 3G/HSPA. Already had full signal with RUXUMA7 and it was still full with LB7 and speed was the same (3.7Mbit down/2.6Mbit up)..
lingowistico said:
Didn't notice any difference after flashing Blaze LB7 radio. Vodafone has 2100 for 3G/HSPA. Already had full signal with RUXUMA7 and it was still full with LB7 and speed was the same (3.7Mbit down/2.6Mbit up)..
Click to expand...
Click to collapse
Skyrocket
2G 850/900/1800/1900
3G 850/1900/2100
4G(LTE) 700/1700/2100
http://m.gsmarena.com/samsung_galaxy_s_ii_skyrocket_i727-4303.php
Blaze
2G 850/900/1800/1900
3G 850/1700/1900/2100
4G(LTE) (none)
http://m.gsmarena.com/samsung_galaxy_s_blaze_4g_t769-4420.php
I would recommend you do more reading and reading before you mess with the radio flashing
Good luck
---------- Post added at 04:35 PM ---------- Previous post was at 04:18 PM ----------
lingowistico said:
So what you're saying is: AWS for LTE is enabled in Rogers and AT&T, but, it's disabled for HSPA by default.
I was under the impression that 2100 is used for 3G/HSPA by default eitherway, but you're saying it's not?
Click to expand...
Click to collapse
AWS (Advanced Wireless Service) protocol uses the 2100 for downlink
and the 1700 for uplink..
http://en.m.wikipedia.org/wiki/Advanced_Wireless_Services
The skyrocket has the 2100 in 3G and LTE
but 1700 is not enabled in 3G
Hence the AWS band (UMTS band 4) is not supported in 3G
mahanddeem said:
...
Click to expand...
Click to collapse
Thank you for explaining this, I didn't know all the specifics.
You are correct, the Blaze radio disables LTE and enables AWS.
As you can see here 1700 is not in use in Europe. So the Blaze JB radio is of no use to me.
So in the end, the Pacman JB 4.2.2 ROM worked without a hitch. I did not have to flash the radio at all, it is still working as before.
Baseband still shows up as unknown (the nifty secret codes no longer work), and kernel is now 3.0.72 cyanogenmod.
The phone's working greatI love it when a plan comes together!
What speeds do you get currently on speed test app ?
If your goal is a rom with no bloatware you can debloate a stock tw one...Personally I can never live with cm camera...
At the moment, only about 1.5 MBps, but I am not in a good service area. Even so, everything seems to load quickly.
My only complaints so far would be the ROM itself... already crashed a couple of times, and it has a bizarre way of connecting to the computer (no USB storage mode).
mahanddeem said:
AWS band in HSDPA (or HSPA+) is not enabled in at&t or Roger's radios,since those 2 networks don't use it for HSDPA.. It's used for LTE (700,1700/2100)
AWS 1700/2100 band in HSDPA can be enabled by flashing T-Mobile blaze JB radio...It should work on cm10.1 since it is a JB radio...
Click to expand...
Click to collapse
So it turns out that it may noit have been the ROM after all, but GO Launcher. Everytime I get a new phone, I get sucked in by GO Launcher's sexy looks, but the result is always the same: lagginess and crashes. After switching to Apex launcher, things seem to have settled down.
In terms of the radio, I did some more traveling around today and I would have to say that reception is not as good as it is on my AWS Nexus S, so I might try some different radios after all. Just want to confirm though that if I use an i727 radio (like UCMC1) instead of a T989 radio (like the Blaze radio), I will no longer have access to AWS. Is that right?
Right now I'm thinking UVMB1 from here might be the first stop: http://forum.xda-developers.com/showthread.php?t=1895400
If you ask me , TW stock debloated and tweaked by me is my and always be my rom ...
For the reception, if you have to have the best reception for a network that uses AWS 1700/2100mhz bands for HSDPA/HSPA+ , the skyrocket is not your phone...Or you have to live with issues every now and then...
That's why your nexus s(the T version) has better reception it's a device with native 1700/2100 band support...
Try some other T mobile radios from the blaze,Hercules or galaxy note 1 (remeber you have to use jellybean radios with any jeallybean based rom) and see what gives you best reception, but again don't expect miracles...
Or another note, try a stock jb uvmc6 rom (flash a skyrocket kernel for the roation problem) and uvmc6 radio or another T-Mobile radio as a combo if it is better regarding general network performance...
Edit: answering your question,yes ..skyrocket or Roger's modem will not have 1700/2100 AWS HSPA connectivity...And that "first stop" was my first advice for you...UVMB1 radio...
mahanddeem said:
If you ask me , TW stock debloated and tweaked by me is my and always be my rom ...
Click to expand...
Click to collapse
Hey mahanddeem,
Thanks again for the help. Even after removing Go Launcher, I'm still getting a few random reboots/shutdowns per day - enough to annoy me. I did some searching and found out about the sticky button issue, but I have a feeling thats not my problem. Usually when the phone shuts down on its own, I have to remove the battery before the phone will turn on again. I'm not completely discounting the possibility that I have a sticky button, it just seems odd that the solution involves pulling the battery. That makes it seem more like a software/Rom issue to me, so I'm thinking of going back to a TW-based rom, but I don't want to restore my original stock with all its extra bloat-ware. All that to say that I was hoping you could tell me which de-bloated TW Rom you are using. I've found Embryo, which looks interesting: http://forum.xda-developers.com/showthread.php?t=2074328. Is that what you have?
Or another note, try a stock jb uvmc6 rom (flash a skyrocket kernel for the roation problem) and uvmc6 radio or another T-Mobile radio as a combo if it is better regarding general network performance...
Click to expand...
Click to collapse
Thanks for the suggestion. I'm trying to avoid a full stock ROM, mostly because of the bloatware and branding (I can't stand seeing a corporate logo every time I start my phone!) - this is basically the reason I put a custom ROM on in the first place - plus the extra control of course. If this is the only thing that will stop my phone from randomly rebooting and shutting down though, then I'll have to consider it. Hopefully the stripped down TW version that you recommend will help though.
Edit: answering your question,yes ..skyrocket or Roger's modem will not have 1700/2100 AWS HSPA connectivity...And that "first stop" was my first advice for you...UVMB1 radio...
Click to expand...
Click to collapse
Heh heh true enough I still haven't tried flashing anything - I'm still educating myself. The last thing I want to do is start something I can't recover from!
Sandmonkee said:
Hey mahanddeem,
Thanks again for the help. Even after removing Go Launcher, I'm still getting a few random reboots/shutdowns per day - enough to annoy me. I did some searching and found out about the sticky button issue, but I have a feeling thats not my problem. Usually when the phone shuts down on its own, I have to remove the battery before the phone will turn on again. I'm not completely discounting the possibility that I have a sticky button, it just seems odd that the solution involves pulling the battery. That makes it seem more like a software/Rom issue to me, so I'm thinking of going back to a TW-based rom, but I don't want to restore my original stock with all its extra bloat-ware. All that to say that I was hoping you could tell me which de-bloated TW Rom you are using. I've found Embryo, which looks interesting: http://forum.xda-developers.com/showthread.php?t=2074328. Is that what you have?
Thanks for the suggestion. I'm trying to avoid a full stock ROM, mostly because of the bloatware and branding (I can't stand seeing a corporate logo every time I start my phone!) - this is basically the reason I put a custom ROM on in the first place - plus the extra control of course. If this is the only thing that will stop my phone from randomly rebooting and shutting down though, then I'll have to consider it. Hopefully the stripped down TW version that you recommend will help though.
Heh heh true enough I still haven't tried flashing anything - I'm still educating myself. The last thing I want to do is start something I can't recover from!
Click to expand...
Click to collapse
I take it you don't know how to root a stock Rom and delete the bloatware yourself?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
I'm pretty sure I could root it, that much seems within my limited skill set. But first determining HOW to remove the bloatware, and then WHICH things I can safely remove... That I'm not sure of. Besides, if there are already ROM's out there that have done this, why would I duplicate the effort? I'm all in favour of doing things just so I can learn how to do them, but the fact is I have other things I need to do with my time besides fiddling with my phone (family, work, motorbike.... and seemingly endless friggin yardwork!)
Sandmonkee said:
I'm pretty sure I could root it, that much seems within my limited skill set. But first determining HOW to remove the bloatware, and then WHICH things I can safely remove... That I'm not sure of. Besides, if there are already ROM's out there that have done this, why would I duplicate the effort? I'm all in favour of doing things just so I can learn how to do them, but the fact is I have other things I need to do with my time besides fiddling with my phone (family, work, motorbike.... and seemingly endless friggin yardwork!)
Click to expand...
Click to collapse
It's very simple, there are plenty of ways to remove bloat, plenty of guides to do it, and charts that show what things are and if you should remove them.
Embryo would be a nightmare for you. Read the thread. If you don't have the time to research and learn, you should not be flashing things on your phone.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Do your researches, it's not gonna happen that anyone here would put a long extensive guide for you so you can "take a look" at it during your coffee time...
Everybody here is learning everyday from others' posts, problems and discussions...So either you put some effort into learning or nobody's gonna spoon feed you..
As a clue , look at Mohan deodexed stock UCMC1,flash,root,start freezing apps that you know you'll not use...Then using any root explorer you can permanently uninstall system apps...And by the way you can use a custom boot animation even on stock,search for how to...