Hello! I am fairly new to the android scene (to rooting/using roms that is) and well, I recently installed the Skyraider ROM and well, I quite love it (3.0 Vanilla RC3) and well, everything... is absolutely perfect... except the camera.
Now, I have done extensive searching and reading and well, supposedly there is a "koush's kernel" that fixes the camera issue...
My question is.. where can I find this "kernel?" I have spent hours searching online and well, I found a couple of files but none that actually worked.
Supposedly the fix is in ROM Manager, but under "koush" there is only a "test" kernel, which needless to say did not work at all and forced me to do a clockworkmod nand restore.
I looked on the CyanogenMod 6 that the camera works perfectly, and the kernel version is 2.6.32.15-ga81a44fkoush koushik-OSx86 #4, so I partly assume that would be the kernel I need to install, but I can't find it anywhere. The "test" one in ROM Manager is named similarly, except "...dirtykoush koushik-OSx86 #6"
Tried it... didn't work, at all.
Everywhere I look says that the fix is on ROM Manager, but unless I have missed something, it is not there...
Some help on this would be greatly greatly appreciated! Thanks!!!
Newly rooted HTC Inspire, my picture messaging stop working after i rooted my phone does anyone know how to fix it?
I haven't flashed any ROMs to my phone yet or done anything to it fo real
The ROM left on your phone after rooting it was never meant to be left on there. Pick a new ROM and flash it to your device.
Also you might wan't to flash a new Radio/Ril because I was/am still having some problems. It gets a little easier though once you can flash ROM's and Radios faster.
A while back I rooted and flashed Revolution HD 3.6.4 on my Sensation without any issues; noticed immediate improvements, and was really pleased with the performance and battery life. Only issue was the occasional boot loop which I remedied by flashing a Bricked kernel.
Fast forward to two nights ago…
My parents also have Sensations and were not very happy with them so I convinced them let me root them which I did.
I did to their phones exactly what I did to mine, including; s-off, perma root, CWM, nandroid backup, flash ARHD 3.6.4 w/ bricked kernel.
The weird part is both of them are now having identical issues with their phones; really slow, 4hr battery life and laggy.
However…
I was sure to wipe the battery stats by draining the battery to complete shutoff, recharging to 100% (basically overnight 8hr+ charge) and erase battery stats from within CWM
I did not do a Titanium backup because a)they really didn’t have much installed, app-wise and b)I thought a fresh install would be cleaner without trying to recover any settings
I made sure to run the Revolution HD Super wipe before flashing the Rom
Installed the HTC Bricked kernel
The only thing different about their phones than my phone is they never applied the official HTC OTA major update. I went into this thinking it would not matter since we’re installing a new rom anyway but perhaps I’m wrong???
Why would two freshly-rooted phones exhibit the same issues?
I’m planning on re-flashing their phones later this week with the newer ARHD 3.6.5 rom (which I just did to mine ) hoping this will clear up any issues they’re having but want to make sure I’m not doing something wrong first…
Let me ask a more direct question.
Can I flash the new Revolution HD 3.6.5 (including the bundled faux kernel) to a phone that has not had the HTC Sense OTA update? Or will issues arise?
I think the problem is radio wise. Install the recommended radio and see if it solve the problem
OKors said:
Let me ask a more direct question.
Can I flash the new Revolution HD 3.6.5 (including the bundled faux kernel) to a phone that has not had the HTC Sense OTA update? Or will issues arise?
Click to expand...
Click to collapse
Hi,
The issue is most probably the kernel.
Try installing the latest.
You have two choices.
1.faux.(in my sig)
2.bricked.(HERE)
Seeing as you have two phones to play with,why not try one on each.
malybru said:
Hi,
The issue is most probably the kernel.
Try installing the latest.
You have two choices.
1.faux.(in my sig)
2.bricked.(HERE)
Seeing as you have two phones to play with,why not try one on each.
Click to expand...
Click to collapse
I flashed both their phones with the bricked kernel when I installed the rom originally.
If the problem isn't due to the older Sense version being installed what I plan on doing is flash both phones with ARHD 3.6.5 and leave the bundled kernel installed (have the 3.6.5 with new faux on my phone and so far so good).
I can try the radio flash also but I never had to flash the radio on my phone and all three phones are identical (bought them at the exact same time; family plan-thing).
OKors said:
I flashed both their phones with the bricked kernel when I installed the rom originally.
If the problem isn't due to the older Sense version being installed what I plan on doing is flash both phones with ARHD 3.6.5 and leave the bundled kernel installed (have the 3.6.5 with new faux on my phone and so far so good).
I can try the radio flash also but I never had to flash the radio on my phone and all three phones are identical (bought them at the exact same time; family plan-thing).
Click to expand...
Click to collapse
Hi,
I have never updated via OTA,and I never will.(Do not trust what it will do to my phone)
There are known issues with the bundled kernels.
Both of the latest kernels have had good reviews.
Just saying.
The OTA could've updated your radio.
Sent from my Sensation using XDA Premium App
Check if you have recommended radio or not. If not, flash recommended radio. Then,
Try to download ARHD 3.6.5 (check MD5), download latest kenels of your choice.
- Super wipe
- Flash Room, and reboot (just set up phone, dont set google account and facebook yet).
- If you want do flash roomcleaner: reboot into recovery and flash roomcleaner.
- If not, just reboot in recovery, wipe cache and wipe davik cache, then flash kenel of your choice.
- Reboot, set up your google account, facebook account, email account, etc...
- If phone experiences a bit lag during turning page to page in homescreen. Just reboot again. After that you can do all battery calibration, flashing mods or themes.
It may be too careful but that just to make sure I dont mess up everything with flashing.
Hope this help!
stevendph said:
Check if you have recommended radio or not. If not, flash recommended radio. Then,
Try to download ARHD 3.6.5 (check MD5), download latest kenels of your choice.
- Super wipe
- Flash Room, and reboot (just set up phone, dont set google account and facebook yet).
- If you want do flash roomcleaner: reboot into recovery and flash roomcleaner.
- If not, just reboot in recovery, wipe cache and wipe davik cache, then flash kenel of your choice.
- Reboot, set up your google account, facebook account, email account, etc...
- If phone experiences a bit lag during turning page to page in homescreen. Just reboot again. After that you can do all battery calibration, flashing mods or themes.
It may be too careful but that just to make sure I dont mess up everything with flashing.
Hope this help!
Click to expand...
Click to collapse
Hi,
ROM cleaner is flashed immediately after flashing the ROM, without any reboot.
Thanks for all the advice. I just got a call from my mom today saying her phone dies real fast and every time she takes a photo the screen goes black resulting in a battery-pull.
I gotta fix their ****z pronto.
I hyped the whole rooting thing up pretty good after flashing my phone, so far their experiences are pretty bad.
@ stevendph, I'll do exactly as you outlined. Thanks for the step by step.
fwiw the radio is whatever was on the phone from the time of purchase. Ill flash it as well with the 'recommend' radio.
So the consensus is to go back to the Bricked kernel and overwrite the new "updated" Faux kernel bundled in the ROM???
malybru said:
Hi,
ROM cleaner is flashed immediately after flashing the ROM, without any reboot.
Click to expand...
Click to collapse
Yep, it's can be flashed immediately or after 1st reboot, the result will be the same as roomcleaner's function is to delete system apps, files, skin and wallpaper (which are useless or you dont use). Those also can do it manually but yes painfull .
As i stated before, it's just i am doing carefully to watch if is there anything wrong with room flashing, then continue flash other things. What i did was flash, check, flash, check... until having what neccessary -->nandroid backup, flash, check, etc . Just me to be careful
@Okors: related to kenels, just make sure you notice this.
- Faux latest kenels 0.24r1 is really good and stable (if you have 0.24 beta 7, you dont need to update, as they are same).
- Bricked kenels: v1.5 final has the problem with camera, playback video (sometimes for some devices) as blackscreen, freezing. Version 1.4r1 is really good and stable (without Zram enable). Version 1.5 beta #490 with zram, working great for me anytime including camera, playback, etc... but there are reports from someone that they have lags (i dont)...
That's all what i know when testing and reading reports about these kenels, you have the right to choose what is suite for you.
I would just flash Pyramid 3D and 0.91 Bricked, check if GPS and camera work, then call it a day. If GPS doesn't work you could always try my fix or crypted's, boh are flashable.
Pyramid 3D has been the most stable and the fastest out of all the ROMs that I've tried without having to extensively customize for myself. Honestly though, I would just flash your parents stock again. Doesn't sound like they are power users.
Sent from my HTC Sensation
nrvnqsrxk said:
...Honestly though, I would just flash your parents stock again. Doesn't sound like they are power users.
Sent from my HTC Sensation
Click to expand...
Click to collapse
To be honest, I'm mostly after the improved battery life for them. You're right, they're not power users; in fact the phones are way to "smart" for them. Their biggest complaint is battery life (as was mine before I rooted).
At this point I just want to get their phones back to a stable state. It's frustrating because I NEVER had any of these issues when I flashed my phone.
Even the kernels, radios, etc didn't make 'much' of a difference. I was blessed with a really, really stable flash right out of the gate
I even updated to the latest ARHD and bundled faux kernel and my phone is rock solid.
Both of my parents are coming over tonight for dinner. I'm planning on reflashing them to ARHD 3.6.5. using the steps outlined earlier. Hopefully all goes well or it's restore-to-stock time.
OKors said:
To be honest, I'm mostly after the improved battery life for them. You're right, they're not power users; in fact the phones are way to "smart" for them. Their biggest complaint is battery life (as was mine before I rooted).
At this point I just want to get their phones back to a stable state. It's frustrating because I NEVER had any of these issues when I flashed my phone.
Even the kernels, radios, etc didn't make 'much' of a difference. I was blessed with a really, really stable flash right out of the gate
I even updated to the latest ARHD and bundled faux kernel and my phone is rock solid.
Both of my parents are coming over tonight for dinner. I'm planning on reflashing them to ARHD 3.6.5. using the steps outlined earlier. Hopefully all goes well or it's restore-to-stock time.
Click to expand...
Click to collapse
Hi,
May I suggest using the 3.6.x series with the 0.9.1 bricked kernel,found HERE
I put it on my son's Sensation,and he loves the stability and battery life.
He's not a power user.
He just wants a smartphone that works.
Just a thought.
You could also try the stock rom xe by eddyos. Everything works fine and battery last for 14 to 24 hrs in medium to light usage.
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA App
Hey there,
I have an interesting problem, and it has completely stumped me for the past couple days. I recently S-Off'd my Sensation, put cwm recovery on it, and set my CID to 11111111.
I haven't had any problems with that (except that I had to change computers to do it, Revolution didn't want to run right on my laptop or set the CID, so I had to use my desktop).
Now the problem comes when I try to flash a custom ROM. The first one I tried flashing was CM7. When it booted, I got a bootloop problem of the CM7 mod logo over and over. I decided maybe it was a problem with CM7 still being in alpha. Then I tried flashing HyperSensation 1.8, and got the same error (bootloop) on the loading screen. After trying various other ROMS, I realized that it was a common problem with all custom ROMS. Luckily I had backed up the stock setup, and was able to get into that. So it's not a problem with the hardware. I have only tried flashing gingerbread ROMS. I know that ICS ROMS need a new firmware, but I dont want to mess with that unless I can actually get a gingerbread ROM working first...
Any ideas? There was a thread or two about this (on other phones) but didn't have any solutions listed..
Thanks for any ideas people can give me!
TheLastGringo said:
Hey there,
I have an interesting problem, and it has completely stumped me for the past couple days. I recently S-Off'd my Sensation, put cwm recovery on it, and set my CID to 11111111.
I haven't had any problems with that (except that I had to change computers to do it, Revolution didn't want to run right on my laptop or set the CID, so I had to use my desktop).
Now the problem comes when I try to flash a custom ROM. The first one I tried flashing was CM7. When it booted, I got a bootloop problem of the CM7 mod logo over and over. I decided maybe it was a problem with CM7 still being in alpha. Then I tried flashing HyperSensation 1.8, and got the same error (bootloop) on the loading screen. After trying various other ROMS, I realized that it was a common problem with all custom ROMS. Luckily I had backed up the stock setup, and was able to get into that. So it's not a problem with the hardware. I have only tried flashing gingerbread ROMS. I know that ICS ROMS need a new firmware, but I dont want to mess with that unless I can actually get a gingerbread ROM working first...
Any ideas? There was a thread or two about this (on other phones) but didn't have any solutions listed..
Thanks for any ideas people can give me!
Click to expand...
Click to collapse
Hi,
Did you root your phone?
Did you flash the superwipe zip first?
Also are you getting full reboots with HTC splash screen then animation or just the animation looping? Sometimes I have to let mine loop for 5 minutes after first boot of new rom before it settles.
Sent from my Sensation XE using XDA App
I guess I hadn't done everything.. I didn't factory reset before flashing the new ROM... As soon as I did that it boot right in. That's a bit odd to me, as I didn't have to do that with my last phone.
Anywho, solved.
Sent from my Sensation using XDA App
Hi
Bored of waiting for HTC to get the update out to me, so I've s-off'ed, installed Clockwork recovery. Also rooted it.
What I would like is an ICS rom that works. It must be fast, so JIT enabled (there is at least one where JIT doesn't work), I am not bothered one way or the other about sense. It doesn't seem to make much difference these days, there are apps that do everything it does. I use the camera, photos and film, wifi, phone, bluetooth, 3g, market, SD card, so all those things have to work. I'm a relative noob when it comes to installing roms, so something simple to install would be great
Can anyone suggest roms that meet those requirements, it's hard to tell from a 100+ page post on the forums here which bits do and don't work without spending hours trawling through them all.
Thanks
Endolf
I'm using Insert Coin and would recommend it as a first ICS rom. It uses aroma installer so you have your choice of several different options during install and won't need to flash anything extra other than the rom. I'd stay away from sense 4 roms as they still aren't perfected yet.
I'm assuming you've read the firmware update thread and that you know you need the newest firmware before trying to flash an ICS rom?
Are you looking for aosp or sense?
ICSensation 4G
Hi, didn't know I needed a firmware update, I'll have a hunt for the thread, thanks.
Endolf
Hi
Not fussed between AOSP or Sense, as long as it all works, everything sense can do can be got elsewhere.
Thanks
Endolf
I've been using HyperNonsense for about 2 weeks now and I absolutely love it. It's smooth, fast, and stable. And it's very lean. It's whole purpose is to be not much more than an operating system ready for you to customize it with the apps you want. Just about everything is removed from it (SMS, camera, calculator, etc) so you can put only the things you want on it later. This sounds like ti's up your alley. It's technically Sense, but there's no sense elements left in the UI.
Before that I was using Android Revolution HD. It's also very stable. You have the option of running it with or without Sense. (There's an extraction flashable zip that pulls most of the Sense components out of the ROM after you install it). This one comes a little more 'fully loaded' and is basically the stock ICS release with several tweaks to the code.
To use either of these ROM's properly though you need to ditch ClockworkMod Recovery and switch to 4EXT. (It's downlaodable from the market and will flash itself as your new recovery image. You won't need to push anything with ADB or anything from your computer) 4EXT allows you to make choices during the installations of ROMs. Many of the new ROMS require that.
I have been very happy with the new ARHD 6.6.3 version and using ROM Cleaner to get rid of the bloatware up front.