Camera Lens - AT&T, Rogers HTC One X, Telstra One XL

Do you guys know if the lens protrudes past the camera bezel exposing it to surfaces or is it slightly recessed? It's hard to tell from pictures.
Thanks!

jshamoon said:
Do you guys know if the lens protrudes past the camera bezel exposing it to surfaces or is it slightly recessed? It's hard to tell from pictures.
Thanks!
Click to expand...
Click to collapse
It is slightly recessed.

Awesome! So that essentially means when you rest it on a flat surface, the glass won't scratch.
Good to know, thanks!

The unit I saw in AT&T looked like it was completely flush with the ring.

jshamoon said:
Awesome! So that essentially means when you rest it on a flat surface, the glass won't scratch.
Good to know, thanks!
Click to expand...
Click to collapse
That is correct.
Red5 said:
The unit I saw in AT&T looked like it was completely flush with the ring.
Click to expand...
Click to collapse
It looks like it is flush but it's not. I'm looking at mine right now and can tell that it is recessed. Not by much at all, but it definitely isn't flush with the ring.

It is recessed. Barely.
Sent from my HTC One X using XDA

pside15 said:
That is correct.
It looks like it is flush but it's not. I'm looking at mine right now and can tell that it is recessed. Not by much at all, but it definitely isn't flush with the ring.
Click to expand...
Click to collapse
Agreed!
10 char
sent from my Hawks(HOX)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.03mm recessed

Related

any one try aluminum case?

hi
any one try this case??
and what is your opinion about it
thnx
http://www.googlenexusoneaccessories.com/nexus-one-aluminum-case-9141.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I guess if you drop it a lot..otherwise it's gross...
Its looks like it might interfere slightly with the right and left edges of the screen. I'm thinking that it probably doesn't provide much more protection than the Case-Mate while the Case-Mate is IMHO much more pleasing to the eye.
For some reason that one just doesn't look good on the Nexus.
Do you really need something else to hinder the antenna's signal?
Who the **** would use that? seriously. You pay so much for a state of the art device, and you want to wrap it in a $5 piece of aluminium... for what purpose exactly?
This is great, its bullet proof. It might save you. LOL.
what an ugly piece of **** that is. yuck
rjhay22 said:
This is great, its bullet proof. It might save you. LOL.
Click to expand...
Click to collapse
It's definately NOT bullet proof. Aluminum is one of the softest metals. It'd be rad if they could make the Aluminum look like black gunmetal. Mmmmm. I'd get that.
galaxys said:
For some reason that one just doesn't look good on the Nexus.
Click to expand...
Click to collapse
definitely not
hehehe ok guys
cuteya said:
hi
any one try this case??
and what is your opinion about it
thnx
http://www.googlenexusoneaccessories.com/nexus-one-aluminum-case-9141.html
Click to expand...
Click to collapse
er... I dunno why, but it looks awfully similar to the PDair one I saw...
coincidence huh?
http://pdair.com/catalog/product_info.php?cPath=10100000_11000561_11000885&products_id=28069

[Q] Anyone sorted out the horrible white ear piece?

So... i have the white version but absolutely hate the white ear piece grill.... tempted to colour it in with a permanent marker, anyone given it a go?!
Moonie17 said:
So... i have the white version but absolutely hate the white ear piece grill.... tempted to colour it in with a permanent marker, anyone given it a go?!
Click to expand...
Click to collapse
Yup, best mod yet. lol Sharpie took care of it pretty easily, two or three applications. Don't miss the white.
Wicked!!! And it didnt leave a purple tint ay all?
Also did you have to pin price the grill? Seems to have clogged up some of the holes.
Sent from my Nexus 5 using xda app-developers app
I just used a thin slice of charcoal antistatic packaging foam. Makes it look level and keeps stuff out. I used nail clippers to trim it just so.
Not to knock the opinions here but I like the white. At a quick glance, I can always tell which side is up.
angus242 said:
Not to knock the opinions here but I like the white. At a quick glance, I can always tell which side is up.
Click to expand...
Click to collapse
I agree too and with my option, I can always go back to that look
Attaching a picture of the earpiece after the alteration.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any of you would like to post a quick tutorial about this.

Short Review and Pics of Vser TPU Bumper Cases

I picked up a few of these for about $4.50 each and really like them quite a bit. They have a good feel to them and fit the phone perfectly. The buttons still have a nice soft feel when pressing them and don't feel stiff at all. The only thing I don't like is that the back isn't raised enough to protect the camera. Vser Bumper Case on Ebay.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
airmaxx23 said:
I picked up a few of these for about $4.50 each and really like them quite a bit. They have a good feel to them and fit the phone perfectly. The only thing I don't like is that the back isn't raised enough to protect the camera.
Click to expand...
Click to collapse
thanks for sharing, any link where you bought them from?
avid.aria said:
thanks for sharing, any link where you bought them from?
Click to expand...
Click to collapse
I added a link to the OP.
http://www.ebay.com/itm/121474337913?_trksid=p2059210.m2749.l2649&var=420412215326&ssPageName=STRK%3AMEBIDX%3AIT
If anyone wants pics of the other cases on the phone just let me know.
airmaxx23 said:
If anyone wants pics of the other cases on the phone just let me know.
Click to expand...
Click to collapse
Please do. I am having a hard time finding a case I like. Thanks.
nicsneed said:
Please do. I am having a hard time finding a case I like. Thanks.
Click to expand...
Click to collapse
Here you go, if you want a pic from a certain angle of one of the cases let me know.
Is the camera protected when laying flat?

Orzly screen protector

Just received the tempered glass one in the mail. I opened the package and saw this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Help me understand ?
Edit: think twice about get this one. I was about to install but noticed that it covers up the front camera. I never use the front camera, but still.
Sent from my E5803 using Tapatalk
manigault said:
Just received the tempered glass one in the mail. I opened the package and saw this
Help me understand ?
Edit: think twice about get this one. I was about to install but noticed that it covers up the front camera. I never use the front camera, but still.
Sent from my E5803 using Tapatalk
Click to expand...
Click to collapse
yeah mine does too, but honestly, dont see a difference in quality for the cam pics
It's only an issue around the flash since it absorbs some light, and since there's no flash on the front, it doesn't matter. Mine's covering the camera too, no issue at all. I do have a hole for the lightsensor though.
"Edit: think twice about get this one. I was about to install but noticed that it covers up the front camera. I never use the front camera, but still. " Then why cry about it? Most the of the time its just glass so it aint a big problem that its over the lens anyways. But you can get good one's on ebay with the right holes for 3 bucks.

Case w/Charging port cover?

I have issues since my phone is near water alot...
Trying to find a flexible case with a charging port protection?
Any recs?
https://www.amazon.com/Ringke-Compatible-Lightweight-Minimalist-Transparent/dp/B07351MMDP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HKSpeed said:
https://www.amazon.com/Ringke-Compatible-Lightweight-Minimalist-Transparent/dp/B07351MMDP
Click to expand...
Click to collapse
That looks good, was hoping to find a flexible one.....Have you used that?
Thanks!
I had it on my V30 and previous phones. Its a great case. The only complaint is the flexible TPU edges turns yellow over time, if you get the clear color. I always get the smoked color which doesn't discolor over time.
HKSpeed said:
I had it on my V30 and previous phones. Its a great case. The only complaint is the flexible TPU edges turns yellow over time, if you get the clear color. I always get the smoked color which doesn't discolor over time.
Click to expand...
Click to collapse
My experience in past with hard cases was they were so slippery that they slid all over the place...no?
islandfever said:
My experience in past with hard cases was they were so slippery that they slid all over the place...no?
Click to expand...
Click to collapse
this case has a small TPU nipple on each corner of the back, so it won't slide around
HKSpeed said:
https://www.amazon.com/Ringke-Compatible-Lightweight-Minimalist-Transparent/dp/B07351MMDP
Click to expand...
Click to collapse
I use this case and it's not slippery.
Absolutely FANTASTIC case!!
10/10
Matt

Categories

Resources