i was rooting my kindle fire and i missed a step. installing "firefirefire" My kindle wont get recognized by the computer. I ran the kindle fire unbrick utility but even though it detects and cleans out data and so forth it wont load the stock OS onto the device. I've tried everything. i dont know what to do. I looked all over the internet for help but i cant find my situation online
When i boot up the kindle TWRP loads up after about 30 seconds. the kindle fire logo NEVER pops up. I'm so incredibly upset and seriously regret rooting
If i can do it agian successfully I will but i'd love some help in unbricking this thing. any help would be greatly appreciated. I will provide any information necessary.
This will work if your computer asks for a driver when you plug it in
1.Download kindle fire utility
2.Unzip kindle fire utility
3.To install the driver,its easy,just plug in your kindle, when it pops up with the install wizard say pick from the location of: KindleFireUtility>drivers>kindle 4.run kindle fire utility,select 1 then select 1 again
That's it, hope it helps
i briked my kindle plz HELP!!!!!!!!
ok so somehow i got stuck in a boot loop and it kept taking me back to twrp. So i tried kindle fire utility and like an idiot i sclected flash amazon update thinking that would restore factory setings (but i was rong), now it only shows the fire fire fire boot logo,it keeps flashing on and off. On my computer is dosent show the kindles drivers have been installed. if anyone has any advise plz help
thanks, chris
I'm stuck in the same situation. From reading in other posts it seems our only option is to buy a factory cable and repair that way.
Sent from my touchpad using XDA
I was in this same situation.
To unbrick when adb does not detect it,
1. Plug in your kindle to the computer
2. Open a command prompt and navigate to your folder that has adb and fast boot in it
3. Type in "fastboot -i 0x1949 oem idme bootmode 4000" without quotations
4. When it says "waiting for device" turn off your kindle
5. Unplug it then plug it back in then it should detect the command!
If it worked remember to click thanks!
Sent From My Kindle Fire Using XDA HD
Thank you
Thank you Vortex . That command saved my kindle
Fyi - User SkOrPn creates his own factory cables here on xda. Message him for one. Worked really well for me.
Hi All,
i rooted my phone using what i thought was the right img file, but i can only assume it was the wrong file as i can now do nothing, i can boot into the Moto symbol, i can get to the droid with the warning triangle and into the fastboot section but i can no longer detect it when connected to the usb...
can anyone suggest a fix or am i screwed ??
thanks for any help
Try reflashing it with my tool, using unbrick feature, maybe you need fastboot drivers, just download it from sdk
Sent from my awesome ICS Xoom with xda Premium HD
cheers xxlordxx
ill give that a go, which drivers do i need to install for the fastboot ?
i downloaded the google usb driver package via the SDK last time, but it seems they are not firing up when i connect the tab.
TheWhiteDragon said:
cheers xxlordxx
ill give that a go, which drivers do i need to install for the fastboot ?
i downloaded the google usb driver package via the SDK last time, but it seems they are not firing up when i connect the tab.
Click to expand...
Click to collapse
If you can boot, you are not bricked - just start over with the root process using the correct image.
hey guys,
i have downloaded LAIOT but im not sure its detecting the pad, currently im getting
Searching For Device
List Of Devices
(Nothing listed)
on the pad
Starting Fastboot Protocol Support
tried doing the same using the different modes.
on Pad
Starting RSD Protocol Support
Same result on LAIOT
Recovery -
Same result.
this has all been done on a windows 7 laptop,
i have a linux laptop, will i get any more success using that with the google driver ?
just had a brain wave, checked device manager - i have an unknown device detected.. thats where the sodding thing has been hiding...
any ideas what drivers i need to get the dam thing detected correectly ?
just going to try using the default google ones from the SDK.
TheWhiteDragon said:
just had a brain wave, checked device manager - i have an unknown device detected.. thats where the sodding thing has been hiding...
any ideas what drivers i need to get the dam thing detected correectly ?
just going to try using the default google ones from the SDK.
Click to expand...
Click to collapse
Try a diff USB cable - download drivers from MOTOROLA website get this file - MotoHelper_2.1.32_Driver_5.4.0.exe
Okay here we go....
first thing let your xoom stuck on M logo.
Then hold power+volume up.
while power up press volume down to get firstboot.(make sure your PC and xoom know each other.)
You will see some text firstboot bla bla bla on left, top of screen.
Second thing open window cmd.exe
then type ...
cd /AndroidSDK/tools (where ever your adb.exe is located)
fastboot flash boot boot.img (the right boot image)
fastboot flash system system.img
fastboot erase cache
fastboot reboot
wait for reboot. You should see splash screen and you smile on your face.
TheWhiteDragon said:
hey guys,
i have downloaded LAIOT but im not sure its detecting the pad, currently im getting
Searching For Device
List Of Devices
(Nothing listed)
on the pad
Starting Fastboot Protocol Support
Click to expand...
Click to collapse
I need to fix it then...
Sent from my awesome ICS Xoom with xda Premium HD
thanks Mjamocha
ill give it ago tomorrow, sorry been flat out at work.
ill also try xxlords again on another machine just incase its the drivers on the laptop which are the problem.
XxLordxX said:
I need to fix it then...
Sent from my awesome ICS Xoom with xda Premium HD
Click to expand...
Click to collapse
sorry guys i have been flat out at work, SCCM deployment is taking a while to learn & play with.
but im back now and hopefully unbuggering my phone
i am going to redo all the bits you guys suggested on my PC rather than Craptop.
hopefully ill have more joy, ill let ya know how i get on 8)
What about using RDS?
woot im back
Thanks guys, just needed a fresh machine to do it on, think the craptop was a bit confused with the drivers.
TheWhiteDragon said:
woot im back
Thanks guys, just needed a fresh machine to do it on, think the craptop was a bit confused with the drivers.
Click to expand...
Click to collapse
Glad you got it going!
Had a similar problem where I had a boot loop and adb didn't recognise my device, but I could still put it into fastboot or recovery with power + vol down.
What I did was boot the Xoom so that it was stuck at the Moto logo, connected to the PC and queued up the fastboot command (fastboot flash boot boot.img) so the command window said "Waiting for device...", then reset the Xoom and manually put it into fastboot again at which point it picked up the queued command and started flashing.
I am visiting a member of my family and their Kindle Fire "Broke". It seems as if its bricked to fastboot mode only, as when you power it on, the kindle fire logo shows up and then very quickly swaps to the Fastboot logo. Im not too big on kindle stuff so so far I havent gotten anywhere and am having trouble. They wouldnt have rooted, enabled ADB, or done anything beyond vanilla kindle stuff. ADB wont recognize the device on my computer and nothing works on the device to get it into recovery or anything besides fastboot. I am using the stock cable but I have also tried multiple cables and USB ports and restarting computer and kindle. Not sure how to proceed as it seems like theres no way I can communicate with the device.
XDA Visitor said:
I am visiting a member of my family and their Kindle Fire "Broke". It seems as if its bricked to fastboot mode only, as when you power it on, the kindle fire logo shows up and then very quickly swaps to the Fastboot logo. Im not too big on kindle stuff so so far I havent gotten anywhere and am having trouble. They wouldnt have rooted, enabled ADB, or done anything beyond vanilla kindle stuff. ADB wont recognize the device on my computer and nothing works on the device to get it into recovery or anything besides fastboot. I am using the stock cable but I have also tried multiple cables and USB ports and restarting computer and kindle. Not sure how to proceed as it seems like theres no way I can communicate with the device.
Click to expand...
Click to collapse
Welcome to XDA Developers.
First, please register as a user, here > http://forum.xda-developers.com/register.php
After you have registered, go to the following thread. Read the OP (Original Post) carefully, then scan the rest of the pages, looking for information that can help you. After you have done that, you can post your help request here > http://forum.xda-developers.com/showthread.php?t=2128848
One of our experts will help you.
Good luck.
Hi Everyone, can you kindly help me regarding this. I was recommended to ask for assistance from @ggow @draxie or @Davey126
I just was able to root my Kindle Thor and open up google play store yesterday, thanks to the help of Yousucks2, see belows Posts 83 to 90 of page 9
https://forum.xda-developers.com/ki...artially-fire-os-to-proper-rom-t3421623/page9
My problem started on page 10 from Posts 91 to 94 (which I will summarize here)
https://forum.xda-developers.com/ki...rtially-fire-os-to-proper-rom-t3421623/page10
---- After rooting and being able to use Play store on my Kindle Fire Hdx 7 Thor, I was trying to access a game that was region locked, I tried several things and apps like VPN changer, then it led me to this app, Region Changer that was asking for root access, which I allowed. It was a last ditch effort and I shouldn't have used it and I should have just given up trying to access that game.
https://play.google.com/store/apps/details?id=tw.TigerHuang.RegionChanger&hl=en
After using the app and allowing root access, I chose korean and while it was changing my settings to korean (I thought I could just change it back to English later, after I'm able to access the game) It froze my kindle for 5 minutes and I couldn't move anything, so i rebooted my device.
Kindle stuck at Kindle Fire logo with the “Kindle” word being white and “Fire” word being orange.
According to yousucks "Looks you soft bricked the tablet, the root access you allowed, probably change it some UI elements, and thats why the OS refuse to starts and stays on a loop"
I recommend you ask for assistance to @ggow @draxie or @Davey126 , they have high tech tknowledge levels to help you in this case , but you need explain what you did exactly ,and have the necessary tools and knowledge to apply the procedure (if be possible)
Open a new thrad asking for asistance.
Can someone help me or walk me through the procedures of unbricking this tablet, i remember doing Adb some time ago when modding my Fire Stick Tv.
Any help will highly be appreciated, Thank you.
More relevant info needed
Interestingly enough, it matters less how you got into this state,
than what we have to work with. And, your post is a bit short on
those details. I understand your device was rooted. Other than
that, I'm guessing that it was stock FireOS (locked bootloader, no
TWRP)? Can you confirm? If so, what version?
And, the most important question(s) of all: how does the device
show up when connected to your computer (via USB)? Does it
respond to adb commands?
Hi draxie, device was just rooted the other day and was running on fire os 4.5.5.3
I haven’t use any twrp on it
I still haven’t connected it to my computer via Usb since I’m awaiting instructions on how to access it using adb commands
I just read this
https://www.google.com/amp/s/www.ho...use-abd-the-android-debug-bridge-utility/amp/
Do i need to install adb on my computer or the command line will do?
Sorry first time for me doing this can you guide me, the last time i did something similar was modding fire stick tv using command line and following instructions online
Thorhdx said:
I just read this
https://www.google.com/amp/s/www.ho...use-abd-the-android-debug-bridge-utility/amp/
Do i need to install adb on my computer or the command line will do?
Sorry first time for me doing this can you guide me, the last time i did something similar was modding fire stick tv using command line and following instructions online
Click to expand...
Click to collapse
https://developer.android.com/studio/releases/platform-tools.html
here is the adb and fastboot only if you dont want to install the whole package
if your phone could be detected we will see what can we do from there
Hi draxie, thanks, i unzipped the file from your link and installed all the exe on it. I was getting these
https://ibb.co/nxJtaR
https://ibb.co/cS5vpm
There must be a problem on my installation? Since it’s also showing on my friends kindle 5 & 7 the same thing “list of devices attached” even though they’re not soft bricked and usb debugging was allowed on those tablets
Sorry i read wrong, it was hope who sent that link, thank you hope
Thorhdx said:
Hi draxie, thanks, i unzipped the file from your link and installed all the exe on it. I was getting these
https://ibb.co/nxJtaR
https://ibb.co/cS5vpm
There must be a problem on my installation? Since it’s also showing on my friends kindle 5 & 7 the same thing “list of devices attached” even though they’re not soft bricked and usb debugging was allowed on those tablets
Click to expand...
Click to collapse
did you try to do a factory reset ?
i guess doing that must reset the values changed by the app.
When I couldn't shut down the kindle, and it was stuck on the logo for more than an hour, i tried holding the power button around 10 seconds, and that could have done a factory reset of the device?
I figured what was missing when adb wasn't listing devices when testing kindle 5 & 7, i was missing the usb drivers for the laptop to recognize the kindles, so i installed it and both kindle 5 & 7 were recognized when typing "adb devices" on command prompt
But it still doesn't recognize kindle fire hdx 7 thor, and when i type adb devices it shows "list of devices attached" only and I get a notification everytime I plug it says "USB device not recognized" and everytime I try to install driver it says driver is up to date
I read this post #19 on this thread
https://forum.xda-developers.com/showthread.php?t=2200750&page=2
"if your issue is not hardbrick, which mean that you tablet can power up and display something on the screen then you have a chance to get it fixed, just look for the thread here and you will find a way to fix it."
I hope there's still a way to make this work
VID/PID??
Thorhdx said:
When I couldn't shut down the kindle, and it was stuck on the logo for more than an hour, i tried holding the power button around 10 seconds, and that could have done a factory reset of the device?
Click to expand...
Click to collapse
Nope.
Not that it would help, but FYI: stock recovery
can do a factory reset, but that normally only
wipes your user-specific data. And, from what
you described the issue is probably a botched
build.prop in your /system partition (which is
NOT touched by a factory reset).
If you like you could try to enter stock recovery
by fully powering off the device (hold the Power
button until the screen goes black). And, then
holding the Volume-Up button and pressing
(and holding) the Power button until the grey
Kindle Fire logo appears.
Thorhdx said:
I figured what was missing when adb wasn't listing devices when testing kindle 5 & 7, i was missing the usb drivers for the laptop to recognize the kindles, so i installed it and both kindle 5 & 7 were recognized when typing "adb devices" on command prompt
Click to expand...
Click to collapse
Are you using the official Amazon drivers?
https://developer.amazon.com/docs/fire-tablets/ft-set-up-your-kindle-fire-tablet-for-testing.html
Some people had better luck with other drivers
(which I cannot recall as I don't use Windows).
Thorhdx said:
But it still doesn't recognize kindle fire hdx 7 thor, and when i type adb devices it shows "list of devices attached" only and I get a notification everytime I plug it says "USB device not recognized" and everytime I try to install driver it says driver is up to date
Click to expand...
Click to collapse
Could you _PLEASE_ check in Device Manager what
VendorID and ProductID your unrecognized USB device
reports to your system (assuming it enumerates)?
Hi Draxie, Merry Christmas and Happy Holidays! Here are the images of the kindle fire, it seems that there is no vendor id and product id showing up in the details when I go into properties.
https://ibb.co/hmHVPm
https://ibb.co/c9RPjm
https://ibb.co/joRDc6
https://ibb.co/mEMqPm
I also cannot install the driver that I downloaded before and also from the link you sent.
https://ibb.co/iRJyAR
https://ibb.co/izNEjm
Thanks for the instructions regarding stock recovery, should I try it?
Thorhdx said:
Hi Draxie, Merry Christmas and Happy Holidays! Here are the images of the kindle fire, it seems that there is no vendor id and product id showing up in the details when I go into properties.
https://ibb.co/hmHVPm
https://ibb.co/c9RPjm
https://ibb.co/joRDc6
https://ibb.co/mEMqPm
I also cannot install the driver that I downloaded before and also from the link you sent.
https://ibb.co/iRJyAR
https://ibb.co/izNEjm
Thanks for the instructions regarding stock recovery, should I try it?
Click to expand...
Click to collapse
My point in doing factory reset was that: if the app changed only values in /data partition then this might allow you to boot up correctly
Rather than that you will have to flash stock frimware
No computer expert, eh? (-;
Thorhdx said:
it seems that there is no vendor id and product id showing up in the details when I go into properties.
https://ibb.co/mEMqPm
Click to expand...
Click to collapse
In the dialog shown in the image above,
could try to select some _other_ property
(like VID / PID) beyond 'Device description'
from that drop-down menu?? (-;
---------- Post added at 18:16 ---------- Previous post was at 18:09 ----------
-Hope- said:
My point in doing factory reset was that: if the app changed only values in /data partition then this might allow you to boot up correctly
Rather than that you will have to flash stock frimware
Click to expand...
Click to collapse
Personally, I doubt that changes in /data would stall
the startup process at such an early stage, but if the
data on the device is of no significant value (and/or
backups were taken), then it may be worth a try to
see if a factory reset helps.
@-Hope-: could you HIDE or otherwise tone down
your substantial signature? It hurts the eye... (-;
draxie said:
In the dialog shown in the image above,
could try to select some _other_ property
(like VID / PID) beyond 'Device description'
from that drop-down menu?? (-;
---------- Post added at 18:16 ---------- Previous post was at 18:09 ----------
Personally, I doubt that changes in /data would stall
the startup process at such an early stage, but if the
data on the device is of no significant value (and/or
backups were taken), then it may be worth a try to
see if a factory reset helps.
@-Hope-: could you HIDE or otherwise tone down
your substantial signature? It hurts the eye... (-;
Click to expand...
Click to collapse
I do too but its worth a try
A last resort would be getting stock to be flashed
Removed the signature:laugh:
Hi Hope, Draxie,
Sorry I didn't get it about the VID/PID beyond device description lol know i understand went to plug the kindle and it wasn't as the same as before showing kindle on portable devices, this is what is showed
https://ibb.co/hp6wVR
Weird because it was showing kindle earlier, i tried to reboot device holding power button for 10 seconds and even rebooted PC, anyway since no kindle was shown on portable devices like before, i just got it from a pop up that showed regarding an unknown device when I plugged in the kindle
https://ibb.co/dbr24m
And there was no VID/PID I saw on the drop down list beyond device description
https://ibb.co/kg5OAR
https://ibb.co/dBVOAR
I doubt the kindle is the G because when I plugged the kindle earlier it showed G and Kindle separately
This was it earlier
https://ibb.co/hmHVPm
Regarding the G
https://ibb.co/dm3bVR
https://ibb.co/h6EiAR
https://ibb.co/fstX4m
https://ibb.co/bRsQPm
Is this the VID/PID below in between No connect sound and Class Long name
https://ibb.co/kxSs4m
I'm just checking so later when I'm able to go on the drop down list for the Kindle I got the correct values, the question is why is the kindle not showing on portable devices compared to now.
Also before I do a factory reset by:
fully powering off the device (hold the Power
button until the screen goes black). And, then
holding the Volume-Up button and pressing
(and holding) the Power button until the grey
Kindle Fire logo appears.
Is there a risk I may hard brick the device if I do a stock recovery? Or not really?
Also I know it's not the G:\ cause even when I unplug the kindle the G:\ is still showing
I'm still trying to make the kindle show in device manager in portable devices, will update you when it shows up there.
Also I just remembered - when I plugged in the kindle earlier to find it in device manager, there was no more battery, and while it was plugged in the USB it showed the red no battery sign, and while it was plugged in the USB port it charged the kindle and when it powered up it was then I saw it in the device manager
https://ibb.co/hmHVPm
But now even if I plug or unplug it, no kindle it showing on device manager
I probably should let the battery die and repeat the same thing, so I can get the VID/PID for the Kindle beyond the device description
Or should I do a factory reset now, no risk of hard brick?
Thorhdx said:
I probably should let the battery die and repeat the same thing, so I can get the VID/PID for the Kindle beyond the device description
Or should I do a factory reset now, no risk of hard brick?
Click to expand...
Click to collapse
do not do a factory reset it seems to be a bad idea , trust me
What was the phone's frimware version? <=1314.3.2.6.*?