Related
I successfully flashed to att ICS using Jim's method. Then I decided to roll back to 2.3.6 and used Jim's ICS back to 2.3.5 fxz fix zip file. The RSD stopped at 5/19 reboot bootloader for a long time and the screen was off. I hit the power button trying to turn on the screen without thinking. Then I realized that I was flashing! It was too late and I saw FAILED on RSD. My A2 cant turn on anymore. I did not unplug or pull the battery. Any help would be appreciate!
qtqt710 said:
I successfully flashed to att ICS using Jim's method. Then I decided to roll back to 2.3.6 and used Jim's ICS back to 2.3.5 fxz fix zip file. The RSD stopped at 5/19 reboot bootloader for a long time and the screen was off. I hit the power button trying to turn on the screen without thinking. Then I realized that I was flashing! It was too late and I saw FAILED on RSD. My A2 cant turn on anymore. I did not unplug or pull the battery. Any help would be appreciate!
Click to expand...
Click to collapse
DId you replace ALL of the files and then point the RSD to the xml?
Can you boot into fastboot by holding power button and vol down.If can you just reflash it using rsd lite.Tell me more detail about your atrix 2 current rom and which version of rom you are flash with rsdlite.
Sent from my MB865 using xda premium
Exact same problem has occurred to me as well.
I did replaced the files Jim created to FXZ back to 2.3.6 from ICS
My Battery was fully charged at the time of flashing. Flashing stopped at 5/19 reboot bootloader for 15 mins then tried rebooting it manually but it didn't started.
Now I've tried everything but it is not even starting in Fastboot
Please help me with this, I don't want to start any new thread so posted my problem here.
EDIT: I think this is a common problem as the OP here also have the same problem
http://forum.xda-developers.com/showthread.php?t=1781045
http://forum.xda-developers.com/showthread.php?t=1700775
I only flashed ICS when Jim confirmed that it was possible to revert back to 2..3.5
I think there is a problem in reverting back to 2.3.5 once applied ICS update and people should be aware of that.
Everyone should stop flashing ICS leaks otherwise they might end up bricking their phone forever.
100% same to me.
Up to ICS ok, back to Fxz with RSD and stuck at 5/19 reboot-bootloader step, I disconnected cable and phone black forever.
A lot of people they failed when flash with RSD but no problem, just take battery out and return, boot again to fastboot to re-flash. I think wrong file in Fxz not makes this problem, main cause I still don't know ! Maybe we are unlucky man ?
FXZ is not wrong one as I did used it when I had to flash back to stock from lithium Rom last week. I think phone is dead because it is not even booting into fastboot.. I've tried even booting to our stock recovery by pressing 3 buttons but no luck so far.
Its just very bad few hours back I was running ICS and now my phone is not even booting up.
OMG man!! I should have make a thread about this yesterday, but maybe nobody would of paid attention. I didn't really want this to happen to anyone, when flashing from 4.0.4 back to 2.3.5 it will get stuck at 5/20, something like that saying "rebooting loader". Now my phone with a blackscreen is getting hot when I insert the battery and when I plug it without a battery into my laptop or wallcharger and I dont have warranty. I call it white LED of death, when I plug it in to my laptop without a battery hehe , so I guess i'll be paying maybe 200$ dollar for it to be repaired, well if they repair it though, they charge so much here.. But i'm still trying to look what I can do, before I take it to a repair shop.
I heard about this problem when leak ICS for China/HK market 1 month ago, from xda man, and Jim he warned everybody here take care when coming back GB from ICS leak should make your phone bricked.
Now ATT ICS leak was released and all trusted Devs here confirmed that we can turn back to GB without problem, so I thought that it was safe to do with. Next day Jim posted new thread with new patch file. So sad ... I'm too late, we're too late ...
vinamilk said:
I heard about this problem when leak ICS for China/HK market 1 month ago, from xda man, and Jim he warned everybody here take care when coming back GB from ICS leak should make your phone bricked.
Now ATT ICS leak was released and all trusted Devs here confirmed that we can turn back to GB without problem, so I thought that it was safe to do with. Next day Jim posted new thread with new patch file. So sad ... I'm too late, we're too late ...
Click to expand...
Click to collapse
I didn't even flashed ICS leak first day, I did it second day when Jim confirmed and uploaded a link for new replace files.
prasannapmv said:
I didn't even flashed ICS leak first day, I did it second day when Jim confirmed and uploaded a link for new replace files.
Click to expand...
Click to collapse
So this is the point that I'm very confused, I think that even failed flashing phone still powered on normally : wrong boot.img --> just jamed at boot logo, wrong bootloader --> screen turn on and shows errors; need to be flashed again by RSD or script. Some man here even not flashed anything, just root then reboot and phone dead without any reason.
vinamilk said:
So this is the point that I'm very confused, I think that even failed flashing phone still powered on normally : wrong boot.img --> just jamed at boot logo, wrong bootloader --> screen turn on and shows errors; need to be flashed again by RSD or script. Some man here even not flashed anything, just root then reboot and phone dead without any reason.
Click to expand...
Click to collapse
I guess it has something to do with our bootloader, maybe it's stuck or not even working.
darkmixta said:
I guess it has something to do with our bootloader, maybe it's stuck or not even working.
Click to expand...
Click to collapse
I just talked to a Motorola service person he was saying in some rare cases a inbuilt ROM(read only memory) chip which stores bootloader files gets corrupted and in that case it might not even be possible to boot into fastboot.
I don't know how far he is right but one ting we are sure that our hardware was perfectly ok before flashing FXZ.
For me I even made sure that my battery was fully charged before starting FXZ.
prasannapmv said:
I just talked to a Motorola service person he was saying in some rare cases a inbuilt ROM(read only memory) chip which stores bootloader files gets corrupted and in that case it might not even be possible to boot into fastboot.
I don't know how far he is right but one ting we are sure that our hardware was perfectly ok before flashing FXZ.
For me I even made sure that my battery was fully charged before starting FXZ.
Click to expand...
Click to collapse
Same here I had like 90% battery or more, is you're phone becoming hot? When you plug it in or insert the battery?
darkmixta said:
Same here I had like 90% battery or more, is you're phone becoming hot? When you plug it in or insert the battery?
Click to expand...
Click to collapse
yes its getting heated when connected to a wall socket or on a battery.
Did anyone upgrade RSDlite to 5.7 before trying this by any chace?
That might be an issue.
Also, this could be something that was introduced to later model phones. My a2 was able to fxz back, but it ws made in SEPT 2011. Just another thought.
Sent from my SAMSUNG-SGH-I747 using xda premium
prasannapmv said:
yes its getting heated when connected to a wall socket or on a battery.
Click to expand...
Click to collapse
Hahaha, what should we do? Yesterday I felt like throwing my phone into the wall man and just %$#@ Motorola, this is like the biggest failure ever!! Hard bricked without doing something wrong.. Wish I could go back in time sometimes and I don't even have warranty which sucks, what are you gonna do?
Really hard to hard brick? http://forum.xda-developers.com/showpost.php?p=28324515&postcount=10
We hard bricked so easy..
jimbridgman said:
Did anyone upgrade RSDlite to 5.7 before trying this by any chace?
That might be an issue.
Also, this could be something that was introduced to later model phones. My a2 was able to fxz back, but it ws made in SEPT 2011. Just another thought.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I was already using RSD 5.7
jimbridgman said:
Did anyone upgrade RSDlite to 5.7 before trying this by any chace?
That might be an issue.
Also, this could be something that was introduced to later model phones. My a2 was able to fxz back, but it ws made in SEPT 2011. Just another thought.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I did not. It is 5.6. That may be the reason. I got my A2 from att in Nov 2011, so I guess it is the same earlier version, right?
To those with the issue, can you not get back into ap fast boot? Either hold both volume buttons down with power, then select it from the menu, or i have found that holding up with power will boot you right into fastboot.
Sent from my MB865 using xda premium
Fall of Enosis said:
To those with the issue, can you not get back into ap fast boot? Either hold both volume buttons down with power, then select it from the menu, or i have found that holding up with power will boot you right into fastboot.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Nope they can not even power on anymore. This is what we all feared. The hk leak had this same thing in it...
Looks like moto will be warrantying a bunch of phones.
I am just not sure why I can still do it...
We have had way too many of these now for it to be user error or an accident.
Sent from my SAMSUNG-SGH-I747 using xda premium
Okay, so here's a long story short. I flashed AT&T ICS leak #2 when I first got my replacement due to a brick. I ran SCV7 for a week or so and decided to try out CM10. I restored my backup of stock/rooted backup. Uninstalled highjacks, packages and app (bootmenu) itself. I then installed our OG A2 bootstrap, installed fine, installed CM10, played around with it for awhile. Realized I didnt reinstall the OG A2 Bootstrap so went ahead and did that. (without booting into recovery yet) I then later in the day decided to REBOOT my phone to only find me stuck on the CM10 boot animation. I battery pulled, plugged in to see if any recovery would show, none, just the battery charge percentage. I then battery pulled again, got into stock recovery, tried a data and cache wipe to no effect. My problem is, there is NO FXZ for the AT&T leak #2, I have no recovery besides stock and the only thing I can do is take my 32GB SD card out and add/delete files/everything. I saddly did not make a copy of the system.img but was wondering if anyone else possibly did? This would be greatly appreciated as I am stuck with a soft brick until then or a new FXZ to work with AT&T leak #2. Any suggestions or help is very much appreciated. Thanks all for reading and I'm praying for a miracle in my phone right about now lol!
DX2Trip said:
Okay, so here's a long story short. I flashed AT&T ICS leak #2 when I first got my replacement due to a brick. I ran SCV7 for a week or so and decided to try out CM10. I restored my backup of stock/rooted backup. Uninstalled highjacks, packages and app (bootmenu) itself. I then installed our OG A2 bootstrap, installed fine, installed CM10, played around with it for awhile. Realized I didnt reinstall the OG A2 Bootstrap so went ahead and did that. (without booting into recovery yet) I then later in the day decided to REBOOT my phone to only find me stuck on the CM10 boot animation. I battery pulled, plugged in to see if any recovery would show, none, just the battery charge percentage. I then battery pulled again, got into stock recovery, tried a data and cache wipe to no effect. My problem is, there is NO FXZ for the AT&T leak #2, I have no recovery besides stock and the only thing I can do is take my 32GB SD card out and add/delete files/everything. I saddly did not make a copy of the system.img but was wondering if anyone else possibly did? This would be greatly appreciated as I am stuck with a soft brick until then or a new FXZ to work with AT&T leak #2. Any suggestions or help is very much appreciated. Thanks all for reading and I'm praying for a miracle in my phone right about now lol!
Click to expand...
Click to collapse
Hey, and sort of welcome back...
But I hate to be the bearer of bad, bad news... you have a softbrick, and there is NOTHING you can do.
Next time, read everything in an OP... LOL, look who I am telling this to....
The CM10 installs come with their own CWM built in, and flashing bootstrap is what bootlooped you, so after you get another warranty replacement (yes, you HAVE to do this), I would install leak #1 ONLY, then flash cm10 with bootstrap, then do not reinstall any boot hijacks or CWM "like" recovery (bootmenu), because all you have to do it hit the vol down button right as you see the blue led flash during the M dual core logo.
Or enter the CM10 recovery menu and so on and so forth.
This is how I got out of a cm10 boot-loop.
I just restored from bootmenu backup via adb.
tcf38012 said:
Or enter the CM10 recovery menu and so on and so forth.
This is how I got out of a cm10 boot-loop.
I just restored from bootmenu backup via adb.
Click to expand...
Click to collapse
he can't, he installed bootstrap while on cm10m, so he can't get to cwm anymore.
Scratch that ----- Deleted
Well, thanks everyone. Specially you jim. Anyone wanna throw me an fxz they think MIGHT work for the second ICS leak? I'm willing to take the risk since I have nothing else to lose. Ill be most likely calling AT&T tomorrow and give some excuse. Soft brick or hard brick...Ill get a replacement...
Sent From My Eclipsed DROID X2!
DX2Trip said:
Well, thanks everyone. Specially you jim. Anyone wanna throw me an fxz they think MIGHT work for the second ICS leak? I'm willing to take the risk since I have nothing else to lose. Ill be most likely calling AT&T tomorrow and give some excuse. Soft brick or hard brick...Ill get a replacement...
Sent From My Eclipsed DROID X2!
Click to expand...
Click to collapse
I will get with alteredlikeness and see if we can possibly think of something together on this one. The first thought would be to try an mearet/searet fxz for 2.3.6 since they can fxz back with out any mods to thier 2.3.6 or 2.3.5 fxz from thier ICS leaks, but I am thinking that will still brick you, but interested to see anyhow.
So I will see if alteredlikeness and I can think of some other way to try. He or I will PM you either way.
jimbridgman said:
I will get with alteredlikeness and see if we can possibly think of something together on this one. The first thought would be to try an mearet/searet fxz for 2.3.6 since they can fxz back with out any mods to thier 2.3.6 or 2.3.5 fxz from thier ICS leaks, but I am thinking that will still brick you, but interested to see anyhow.
So I will see if alteredlikeness and I can think of some other way to try. He or I will PM you either way.
Click to expand...
Click to collapse
he can flash just a system. img from ics though, And that should recover it
Sent from my MB865 using xda premium
lkrasner said:
he can flash just a system. img from ics though, And that should recover it
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
You know, I was seeing in recovery how youbcan flash an update through sd AND system which has a lost and found folder and recovery folder. Dont know if this is of any info but either way because I wouldnt know how to put anything in system since I cant seem to get adb to recognize or moto-fastboot...I'm in a very confused state of mind and almost came to the point of hard brick but I refuse. I'll leave it up to ya devs. Thanks againg everyone.
Sent from my MB870 using xda premium
i have same issue , any way to flash system img, and where whould i get system img from? i have preiviously backed up thru cwm
justdrew said:
i have same issue , any way to flash system img, and where whould i get system img from? i have preiviously backed up thru cwm
Click to expand...
Click to collapse
Try following this:
http://forum.xda-developers.com/showthread.php?t=1926873
First Softbrick it seems In Trouble
jimbridgman said:
Try following this:
http://forum.xda-developers.com/showthread.php?t=1926873
Click to expand...
Click to collapse
Guys need your urgent help i am into a trouble what is it called technically may be a Soft brick but this is what has happened.
I was trying the Magic mod the installation went superb booted the phone it worked properly and then i used the bootstrap :silly: and tried starting the phone in recovery after which my phone is now stuck at magic mod boot animation. PLEASE HELP.
I am upto a point where have installed drivers latest rsd lite 6.0 ready with the extracted fxz 6.7.2_EDEM-18-SEARET_cfc.xml but phone is not showing up in rsd lite so that i can flash my phone. Phone says USB connected in AP Fastboot mode have a look at the attachment of my desktop. Please HELP guys....
Thanks & Regards,
Beginner Android (Ravi D)
havent you just posted this in the any question answered here thread and getting help there ??
Wow, almost forgot I made this thread lol. But sounds like your drivers need a good updating. Reboot PC after updating and try again is all I can say. Hope this helps.
Sent from my MB865 using xda premium
Well, i recently installed the MIUI rom to see if the battery bug was fixed, but its not.
So, i was triyng to go back to the ics leak, as always.
But now, i don't know why, when i'm in the step 14/21 the program doesn't move.
I mean, the '>>' is still moving, but i left it about an hour and it's still there.
Any ideas?
brianmoyano said:
Well, i recently installed the MIUI rom to see if the battery bug was fixed, but its not.
So, i was triyng to go back to the ics leak, as always.
But now, i don't know why, when i'm in the step 14/21 the program doesn't move.
I mean, the '>>' is still moving, but i left it about an hour and it's still there.
Any ideas?
Click to expand...
Click to collapse
Wait, you installed MIUI and now you're trying to use RSDLite to flash the ICS leak? That won't work. Which leak are you trying to flash? You're teetering on the verge of a soft brick if you go down this road. Not good...
Apex_Strider said:
Wait, you installed MIUI and now you're trying to use RSDLite to flash the ICS leak? That won't work. Which leak are you trying to flash? You're teetering on the verge of a soft brick if you go down this road. Not good...
Click to expand...
Click to collapse
Oh crap ^^
Firts i flash the '5.5.1-EDEM-27-MEARET_cfc.xml' with RSD lite. Then, when i'm on 2.3.6 i uptadte something via OTA. And then, i flash via recovery 'Blur_Version.55.28.37.MB865.MERetail.en.06.zip'
So, what should i do now?
brianmoyano said:
Oh crap ^^
Firts i flash the '5.5.1-EDEM-27-MEARET_cfc.xml' with RSD lite. Then, when i'm on 2.3.6 i uptadte something via OTA. And then, i flash via recovery 'Blur_Version.55.28.37.MB865.MERetail.en.06.zip'
So, what should i do now?
Click to expand...
Click to collapse
Uh oh... you installed an OTA from 2.3.6? Do you know what the update was for? If it was for the OTA to ICS, and you tried to flash a GB .xml or something lower than the official OTA to ICS, you likely have yourself one of those fancy non-FXA'able soft bricked devices...
Edit: If you were on MEARET you may stand a chance to FXZ back to GB, and try to re-OTA to ICS, as some users have noted success with. But, I'm not making any promises in your case...
@Apex, i tried the back to GB from ICS utility and I'm stuck at the dual core screen. I can access AP fastboot however. I was on the stock ICS leak, and i deleted safestrap, and logwrapper and logwrapper.bin files, and upon rebooting i was stuck at boot screen, now after trying the utility I am still in the same position... any help??
No, no. I doesn't installed anything yet. That was the steps that i do to go into ICS Leak, but now, y cant pass throught the first the step. When i flash the .xml it freeze at 14/21.
But, my other problem is that i don't have enough battery, and i think i'm going to the warrancy service.
Enzopreme said:
@Apex, i tried the back to GB from ICS utility and I'm stuck at the dual core screen. I can access AP fastboot however. I was on the stock ICS leak, and i deleted safestrap, and logwrapper and logwrapper.bin files, and upon rebooting i was stuck at boot screen, now after trying the utility I am still in the same position... any help??
Click to expand...
Click to collapse
If you were on the first leak, and tried to FXZ back to GB, you still have a fighting chance. It's only when on the 2nd leak (as was my case) that's there's no known way out of that soft brick. I'm sure Jim or alteredlikeness will see this and figure out how to bring you back out. Sorry, I'm not much help without my knowledge of FXZ'ing back from ICS leak #1. You shouldn't worry too much, I think you're situation is 'fixable'...
Sent from my rooted Mayan Calendar
Apex_Strider said:
If you were on the first leak, and tried to FXZ back to GB, you still have a fighting chance. It's only when on the 2nd leak (as was my case) that's there's no known way out of that soft brick. I'm sure Jim or alteredlikeness will see this and figure out how to bring you back out. Sorry, I'm not much help without my knowledge of FXZ'ing back from ICS leak #1. You shouldn't worry too much, I think you're situation is 'fixable'...
Sent from my rooted Mayan Calendar
Click to expand...
Click to collapse
how can i be sure whether i was on the first or second leak? i used the Blur_Version.55.13.25.MB865.ATT.en.US to get ICS, is that the 1st leak?
Can you give us a link to a thread where you downloaded it from? It did you ota to it?
Sent from my SAMSUNG-SGH-I727 using xda premium
http://www.grupoandroid.com/topic/52205-ics-filtrado-version-no-att/
This is the tutorial that i use. Is in spanish, but i guess that was extracted from here.
And, i use this MIUI.
http://forum.xda-developers.com/showthread.php?t=1914096&page=11
Made it to ICS without looking at this thread
I ran into the same issue freezing at 14/21 and failing at 16/21. Being stubborn I continued installing updates.
When an update is ready to install and my phone restart and say flash failure, I would hold both volume buttons and press the power button, once to exit and again to reenter. Next I would scroll to recovery and the installation would continue.
First update 2.3.6 then ICS. During ICS update I had flash failure a couple time but I just redo the button combination the scroll to recovery, thinking everything would be wonderful.
Well I now have ICS installed but my ringtones and notifications won't stick. When I shut down my phone is goes back to the flash failure screen and will not charge automatically while off. These are the only issues I've noticed, I'm sure there is more...
Please help!
Hi guys!
I tried searching for a similar problem that I have but wasn't able too. So I need your help here.
So I lost my CID, didn't back it up so was using bptools for it when I was on JB leak3.
1) I flashed CM11, 4.4.2 dated 14 Dec after flashing gapps, it removed my recovery and was bootlooping
2) I reflash the same leak3 which used to work earlier using RSDlite. Now the rom isn't booting i.e. it is stuck in it's "pumping logo".
3) I again try reflashing using RSDlite, only this time, it fails and status is shown as battery low in fastboot. Now I connect charger, it boots, stuck in the white screen which is expected since I lost my CID.
So, does this mean that it's charging? If not, am I screwed??
shubham1120 said:
Hi guys!
I tried searching for a similar problem that I have but wasn't able too. So I need your help here.
So I lost my CID, didn't back it up so was using bptools for it when I was on JB leak3.
1) I flashed CM11, 4.4.2 dated 14 Dec after flashing gapps, it removed my recovery and was bootlooping
2) I reflash the same leak3 which used to work earlier using RSDlite. Now the rom isn't booting i.e. it is stuck in it's "pumping logo".
3) I again try reflashing using RSDlite, only this time, it fails and status is shown as battery low in fastboot. Now I connect charger, it boots, stuck in the white screen which is expected since I lost my CID.
So, does this mean that it's charging? If not, am I screwed??
Click to expand...
Click to collapse
If fastboot says low battery then u cant RSD.....
Google Mcgruyver method or externally charge ur battery....( ie if you get a white led )
If your in india it shouldn't be a problem finding an external universal battery charger in any cell shop....
darth_nihar said:
If fastboot says low battery then u cant RSD.....
Google Mcgruyver method or externally charge ur battery....( ie if you get a white led )
If your in india it shouldn't be a problem finding an external universal battery charger in any cell shop....
Click to expand...
Click to collapse
Thanks for your reply buddy!
But it was charging even when the screen was white. So now I'm on JB leak 3. Any idea why did my recovery uninstalled automatically?
shubham1120 said:
Thanks for your reply buddy!
But it was charging even when the screen was white. So now I'm on JB leak 3. Any idea why did my recovery uninstalled automatically?
Click to expand...
Click to collapse
Dude if fast boot says low battery RSD wont flash it............whether or not it was charging with a white screen
So u have to externally charge the battery
And from what i know u can't flash ICS once ur on the JB leak ie u can't downgrade so u will have to flash the same leak again......
shubham1120 said:
Thanks for your reply buddy!
But it was charging even when the screen was white. So now I'm on JB leak 3. Any idea why did my recovery uninstalled automatically?
Click to expand...
Click to collapse
BMM can be like that sometimes. There are a few possible ways that it could've happened. As long as you make a backup before trying anything, and have RSD lite and your FXZ handy it shouldn't be too much of a problem. It's more aggravating than anything else...
darth_nihar said:
Dude if fast boot says low battery RSD wont flash it............whether or not it was charging with a white screen
So u have to externally charge the battery
And from what i know u can't flash ICS once ur on the JB leak ie u can't downgrade so u will have to flash the same leak again......
Click to expand...
Click to collapse
If he was getting the "pumping" Motorola logo boot animation, then he was only boot looping so he was able to charge the battery. The battery would've only been an issue if the phone was booting straight into fastboot, or if it wouldn't get past the boot logo.
Also you can downgrade from jb to ICS, just not from ICS to GB.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
1BadWolf said:
BMM can be like that sometimes. There are a few possible ways that it could've happened. As long as you make a backup before trying anything, and have RSD lite and your FXZ handy it shouldn't be too much of a problem. It's more aggravating than anything else...
If he was getting the "pumping" Motorola logo boot animation, then he was only boot looping so he was able to charge the battery. The battery would've only been an issue if the phone was booting straight into fastboot, or if it wouldn't get past the boot logo.
Also you can downgrade from jb to ICS, just not from ICS to GB.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
I din know u can never tried the leaks coz of AT&T but i read somewhere that it changes or updates
the recovery or bootloader ??
Edit: My bad you can downgrade back to ICS
wangs cn leak said u might not so thats where i read it .....
Deja vu!!
1BadWolf said:
BMM can be like that sometimes. There are a few possible ways that it could've happened. As long as you make a backup before trying anything, and have RSD lite and your FXZ handy it shouldn't be too much of a problem. It's more aggravating than anything else...
If he was getting the "pumping" Motorola logo boot animation, then he was only boot looping so he was able to charge the battery. The battery would've only been an issue if the phone was booting straight into fastboot, or if it wouldn't get past the boot logo.
Also you can downgrade from jb to ICS, just not from ICS to GB.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
Hey!
IDK what was I thinking but I flashed pa 4.4.2 gapps on CM11 by altered and BOOM! Lost recovery and bootloop.
So I re-flashed leak 3 it's now stuck in boot animation("pumping"--again what was I thinking lol!) meaning a softbrick. Why is it happening? I mean is it a bad flash?
Or does it have something to do with leak 3? If so, I can't seem to find ics fxz. The superthread links are dead. My another question is-
Will I be able to us AT&T fxz? Since I've already lost my CID, it shouldn't be a problem right?
PROBLEMS PROBLEMS PROBLEMS!:silly:
Also, can anyone give me the link for asian version of ICS?
EDIT- Was able to boot! went to stock recovery, wiped data and cache partition. Thanks for help guys
shubham1120 said:
Hey!
IDK what was I thinking but I flashed pa 4.4.2 gapps on CM11 by altered and BOOM! Lost recovery and bootloop.
So I re-flashed leak 3 it's now stuck in boot animation("pumping"--again what was I thinking lol!) meaning a softbrick. Why is it happening? I mean is it a bad flash?
Or does it have something to do with leak 3? If so, I can't seem to find ics fxz. The superthread links are dead. My another question is-
Will I be able to us AT&T fxz? Since I've already lost my CID, it shouldn't be a problem right?
PROBLEMS PROBLEMS PROBLEMS!:silly:
Also, can anyone give me the link for asian version of ICS?
EDIT- Was able to boot! went to stock recovery, wiped data and cache partition. Thanks for help guys
Click to expand...
Click to collapse
If you ever want to use the JB leaks again, DO NOT flash the AT&T FXZ. Just a forewarning just in case you get stuck again and start considering it.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
1BadWolf said:
If you ever want to use the JB leaks again, DO NOT flash the AT&T FXZ. Just a forewarning just in case you get stuck again and start considering it.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
OMG you're right! Never thought of that! Thank God I acted patiently here. I was gonna flash AT&T ics just before trying that wiping data thing!
Thanks! Will keep that in mind.
One more question though(and hopefully the last..)
Can I flash PA Gapps on slimkat? Since both are based on AOSP right?
i guess i've a problem . by mistake while i was supposed to backup cid , i chose the option erase cid and it s deleted, no backup either. now whenever i reboot, my phone shows some error. since i've bmm i am being able to load into ics in system 1 . is there any possible way to get rid of this error message about cid during startup?? because it is really annoying.
I'm lost.... Phone is stuck at the red electric eye animation. I can so a hard reset, actually did that several times, but the phone always stops in this animation. I haven't changed anything in a while other than downloading an app to reboot the device with one touch. The Phone is unlocked and rooted, but nothing beyond that.
Any ideas?
Thank you,
David
I've never seen this before. Usually only happens on bad recovery installs, ROM installation, or other flash. The only thing I can recommend is a flash of the stock image with RSD lite.
Wait for some other replies though.
Thanks, i would definitely have to research how to do that.
I can get to the boot menu, but all options... recovery, fast boot and factory all get stuck at the electric orb/eye animation.
davfed said:
Thanks, i would definitely have to research how to do that.
I can get to the boot menu, but all options... recovery, fast boot and factory all get stuck at the electric orb/eye animation.
Click to expand...
Click to collapse
If you can't even get into recovery, then definitely it means it's time to go into fastboot mode and flash a stock image back onto it.
You can get to fastboot mode by rebooting the phone (or powering on) and then immediately press vol down + power and that will get you into fastboot mode where you can use either RSDLite or House of Moto tools to flash a stock image back onto your phone.
That seems to be the only recourse.
OK, downloading RSDlite and installing now. Im in AP fastboot flashmode on my phone. I have the latest device drivers from Motorola installed.
So, this whole finding and flashing new image thing is beyond me, i will search for it, but if anyone has an easy explanation, i would greatly appreciate it.
Edit: Ok, i found the correct image to flash. I'm assuming that it is the complete OS? if that is the case, I'm going with the last version where I had almost double battery life. Am i on the right track?
So basically you are going to download a 700mb stock image. Go to http://sbf.droid-developers.org/phone.php?device=5 for that download. That will be what you are flashing
Sent from my DROID RAZR HD using Tapatalk
Thank you so much Sad Panda!!!
I'm flashing 4.4.2 instead of the last version I was planning on. It's in process now so I'll know soon.
If this works, then I will look for a custom rom without all the bloatware and other garbage. I suppose this failure has made me do something that i have always been too nervous to try.
I know that asking questions without searching is frowned upon, and I get that, but having someone to interact with is very reassuring.
Again, many many thanks to you for your time!!!!
Not a problem. I have a question out there right now waiting to be answered, so it's appropriate for me to give back
Sent from my DROID RAZR HD using Tapatalk
It worked. You are my hero Mr. Panda!!!
Thank you!!!
except sbf doesnt have the .15 update yet...but can be found here: http://www.droidrzr.com/index.php/topic/54379-fxz-442-1834615/
cmh714 said:
except sbf doesnt have the .15 update yet...but can be found here: http://www.droidrzr.com/index.php/topic/54379-fxz-442-1834615/
Click to expand...
Click to collapse
is it worth reflshing to get the .15?
I'm halfway to setting my phone back to the way it was.
davfed said:
is it worth reflshing to get the .15?
I'm halfway to setting my phone back to the way it was.
Click to expand...
Click to collapse
IMHO, nope, no real reason if everything is working well.....there was a security fix however.
http://www.verizonwireless.com/dam/support/pdf/system_update/droidrazrhd-09-09-14.pdf