Related
Since there isn't much information (in English) about how to upgrade the Zopo ZP100 phone to ICS I've now done it myself (after reading a lot of Russian forums using Google Translate I finally took the plunge into the deep end of the pool and just did it).
Files needed
ICS ROM (b79):
http://narod.ru/disk/48456521001.ee...T75_h932_b79_pulid_sw 20120428-14151.rar.html
Root:
http://files.dangerd.org/pub/ZP100//zopo zp100 4.0ROOT by008.rar
Flashtool:
http://narod.ru/disk/44888871001.ee...6c3e795/SP_Flash_Tool_exe_v3.1206.01.zip.html
USB Drivers (and a flashtool I didn't use):
http://chinamobiles.org/downloads/zap/ZP100fix.zip
CWM Recovery:
http://files.dangerd.org/pub/ZP100//recovery.img
First of all: Make a note of your IMEI-number(s)
Download the files and unpack all (in seperate folders).
Shutdown the phone and plug it in via USB, Windows will search for a driver which you find in the package ZP100fix.zip (different inf-files depending on windows version).
Unplug phone, remove the battery.
Replace the recovery.img from the ICS ROM with the one downloaded seperately.
Start flashutil.
Load Scatter-file: MT6575_Android_scatter_emmc2.txt
Make sure that Options -> USB Mode is selected.
Click Download
Connect phone (still with no battery, at least I had to leave it out).
Flashing begins.
When all is done it displays an "OK window".
Now reboot the phone and when booted connect to USB again and run Root.bat from the package: zopo zp100 4.0root by008"
Follow on-screen instructions.
I did not need to install any separate Google Apps, it was included in the ROM.
Now you need to add some IMEI-numbers to your phone.
In the original ROM I could only ever see one IMEI for my zp100, so I wrote that down.
IMEI2 I took from an old Nokia I hadn't used for a few years.
Use terminal app or adb shell or whatever to execute the following (replace IMEI_1 and IMEI_2 with your IMEI's):
echo 'AT + EGMR = 1,7, "IMEI_1"'> /dev/pttycmd1
echo 'AT + EGMR = 1,10, "IMEI_2"'> /dev/pttycmd1
Update: Zopo IMEI Tool in English can be downloaded from here: http://depositfiles.com/files/wi41lcuvb (should eliminate the need for the terminal-hack above). If the system language on your phone isn't set to English the utility will be displayed in Chinese by default, so setup your phone to use English before running it.
If you want your external sdcard mounted as /sdcard (/mnt/sdcard) instead of /mnt/sdcard2 you have to replace the /etc/vold.fstab with the following:
http://www.cactuz.net/files/zp100/vold.fstab
Use root-explorer (make a backup of the old one) to replace it, then shutdown your phone and remove the battery, then plug it all back in and start again and your external sdcard shoudl be mounted on /sdcard (/mnt/sdcard) instead.
Hope this helps.
I'll report back here with any bugs etc.
To use RecoveryMod I have to chose it from the menu in MobileUncle Tools or ClockWorkMod Rom Manager, I have not been able to boot to CWM using VolUp+Power.
Some of my favorite apps can't be downloaded from Google Play Market:
Vignette
Endomondo Pro
Snowstorm Weather Widget
GPS Status
I have been able to restore them all using MyBackup Pro and they are running fine, they just aren't compatible according to Play Market.
So any app you really need is good to make a backup of using MyBackup (or Titanium or any other backup app of your choice) so you can restore it if it can't be installed using market after the ICS upgrade.
Note that all these apps can be installed fine on my other devices using ICS (HTC Desire with CM9 and Samsung Galaxy Tab P1000 with CM9 or AOKP) so it's this ROM that is the issue AFAIK.
Thank you ... I'll follow up in a couple weeks
Ordered my zopo yesterday (for the second time -- waited 2 weeks from the first store (merimobiles) and then cancelled when they still hadn't shipped it. Hopefully I'll have better luck this time.)
I appreciate you posting this info and will try it out when I get the phone.
Good luck Dave,
I ordered mine from etotalk.com, got it in about a week with DHL used for shipping.
I've updated the first post with some more info in regards to RecoveryMod and mounting external SDcard as /mnt/sdcard (/sdcard).
Since I use this phone daily I will probably not experiment much with it until any new official release is available. But the current one (b79) is good enough.
There are quite a lot of crappy chinese apps (crappy since I don't know what they do and they aren't translated into a language I can understand) installed with this ROM bit they can all be removed using the normal App-menu in the system settings.
imei no.
hello, u said that u have write the imei no. of old nokia phone which u don't use. i want to know that can i also change both the imei no. as i m from india and in india only valid imei no. works, and i m planning to purchase this phone but i am afraid that if the imei no. are not according to india then it will not work so i just wanted to know that if i write my old dual sim phone imei to zopo zp100, will it work without any problem.
rohit: I can't say for sure if the phone actually reports two IMEI's to the service provider, but at least it displays two IMEI's when I check "About phone" in the sytem settings.
Sorry I can't say if it works or not in India.
hello
hyy , i have ihtc one x aka b79 , followed your procedure it works gr8. but i am facing a problem with usb mass storage and am not able to lock into gps any possibilities to fix this error? and does anyone has an access to orignal android 2.3.4 rom for b79 , to restore to previous bug free state?
DaveKnowsAll said:
Ordered my zopo yesterday (for the second time -- waited 2 weeks from the first store (merimobiles) and then cancelled when they still hadn't shipped it. Hopefully I'll have better luck this time.)
I appreciate you posting this info and will try it out when I get the phone.
Click to expand...
Click to collapse
hiii from which website did u ordered this phone i am also planning to ordere thinking to order from ttmalls.com is it trustable
official android 4.0 is announced.
Newby with ZP100
I have bought a ZP100 with Pandawill.
Received yesterday. Wait around 10 days from China to France
It seems to be ok but there is no Android Market application (or Android Play store)
So i cannot download my applications that i bought with older phone and my phone is not interesting without applications
There is a chinese application looks like a chinese android market but ... i am french and chinese is only beautiful drawings for me.
I difficultly download some but cannot find others
If i change ICS (what is ICS ? System ?) will i resolve my problem ?
I download 2 files (http://www.zopomobile.com/xiazai.php) this morning but i don't know how to install it and afraid there is only chinese language
MP_MT75_h932_h5500_zwx_20120419-203646_ZYQ_PC.rar
ZP100_20120510new4.0.rar (think is the last android version)
I flashed ROM very often on Windows mobile samsung phones i900 and GTi8000 but i don't know Android (just install Android as 2nd system on GTi8000 Samsung). Hope someone can explain me what to do to improve the basic system
Other problem : sometimes i have no network on the 2 SIMs, all stop. I must stop and reboot the phone. Has somebody the same problem ?
Last : how to switch to recovery mode ?
Thanks
@cuctaz
Can you execute nandroid backup/restore in the recovery mode?
E:Can't mount /cache/recovery
ZP100 and ICS upgrade experiences
Hi Guys,
I bought the ZP100 1,5 weeks ago from etotalk.com.
After 1 week i tried to upgrade to ICS about this and Colonel ZAP's description.
My experiences with the ICS upgrade:
When i received the phone, on that was etotalk v1.0 firmware.
It is a very good customized rooted ROM, works fast and it has just some minor bugs.
The only problem was, it could only read the internal storage, when i insert an external SD card. It was strange, but i accept it programming defects.
I downloaded the official 2.3.6 and this B79 ICS, VCOM (Flash) drivers and the flash program.
At first, i downloaded the ClockWorkMod Recovery for chinese phones.
Unfortunately it is make a factory reset on the phone, but after you customize it, you can make full backup about your ROM.
IMPORTANT! Copy the backup to your computer, because the ICS ROM formatted my external SD
This is very recommended, because...
At first i installed the linked B79 ICS ROM.
The default language is chinese, but it contains english, so if you know the android, it is not a challenge to change it. It couldn't read the internal memory neither, just after format it.
It wasn't rooted, and deleted IMEI. When i tried to root (different way as 2.3.6, need USB debug mode and ADB) the Windows doesn't recognize the ADB driver. The driver wasn't in Android SDK, and i can't download it (i haven't tried it on Linux yet). For a moment Windows showed it found HTC Dream device. I downloaded HTC drivers, but it didn't work with it neither.
Without this you can't restore the IMEI.
Ok, go back to the official 2.3.6.
I flashed it back. Almost the same effects. Default chinese language, the internal memory cannot readable. I could root it and install CWM recovery back.
Basically it doesn't contains Play store, but you can install it.
The ROM full of chinese programmes and my experience was it is very unstable.
I uninstalled the chinese programmes, and installed Play store. When i wanted make a call, the phone restarts. The Google Play Store froze every time.
Finally i restore back the etotalk ROM, and i use it.
Maybe if i have time/mood i will install the official ICS, but about my experiences i have doubts with it.
p.s.: in about 30C outside temperature i used the phone (installing programmes). After 10 minutes using it sings that the battery is too hot, remove it from the phone.
Is any other better quality battery what is compatible with this phone? thanks
---------- Post added at 10:34 AM ---------- Previous post was at 10:19 AM ----------
Hi jbctiong,
I used CWM recovery 5.5.0.4.
Just carefully, because it make a full factory reset.
And you need to insert an external SD card
carabaothai said:
I have bought a ZP100 with Pandawill.
Received yesterday. Wait around 10 days from China to France
It seems to be ok but there is no Android Market application (or Android Play store)
So i cannot download my applications that i bought with older phone and my phone is not interesting without applications
There is a chinese application looks like a chinese android market but ... i am french and chinese is only beautiful drawings for me.
I difficultly download some but cannot find others
If i change ICS (what is ICS ? System ?) will i resolve my problem ?
I download 2 files (http://www.zopomobile.com/xiazai.php) this morning but i don't know how to install it and afraid there is only chinese language
MP_MT75_h932_h5500_zwx_20120419-203646_ZYQ_PC.rar
ZP100_20120510new4.0.rar (think is the last android version)
I flashed ROM very often on Windows mobile samsung phones i900 and GTi8000 but i don't know Android (just install Android as 2nd system on GTi8000 Samsung). Hope someone can explain me what to do to improve the basic system
Other problem : sometimes i have no network on the 2 SIMs, all stop. I must stop and reboot the phone. Has somebody the same problem ?
Last : how to switch to recovery mode ?
Thanks
Click to expand...
Click to collapse
go to this link you will be able to fix android market
http://colonelzap.blogspot.in/2012/04/zopo-zp100-rooting-and-market-fix.html
@rohit_shah000
Thanks for the link i will check
@vzzoli
Thanks for your experiences
What is the ClockWorkMod Recovery for chinese phones.
WHy you needed it ?
Now we can download the 4.0 official
Somebody try it ?
hello carabaothai,
I used it for backup/restore my ROM.
But you can use nandroid backup too.
Sorry for my abscence from this thread, I've been busy all weekend actually tuning a car instead of my phone
buntybauva: I've got no problems with USB Mass Storage, could you explain what problems you experience?
I made a nandroid backup of the old ROM, but I haven't used it so don't actually know if it works.
rohit: I ordered mine from etotalk.com
carabaothai:I forgot to mention that the ICS-rom I linked to (and flashed myself) is in Chinese as default, but can be changed to English using the System Settings, luckily there are icons in there so you can find the symbol for language (hint for anyone who doesn't know: It's an "A").
ICS = Ice Cream Sandwich (Android 4.0)
I have not experienced problems with loosing network on the SIM cards.
jbctiong: I had not tried any nandroid backup/recovery yet, tested right now and it doesn't seem to be able to actually do any backup. Some mount errors for sdcard.
vzzoli: Thank you for sharing your experiences.
I agree that the etotalk-ROM is quite good, but I always want the latest stuff on my gadgets
I have not had any issues with reading my sdcard nor in etotalk-rom or in the later ICS-rom.
The ICS rom did not format my external SD. But one should always make a backup of course (I backup my SDcard before every flash I try).
One bug I found in the current ROM is that the Cam/Videocam-switch on the phone doesn't make any difference what position it's in.
I'm going to see what the russian forum says about the official release, I'm quite happy with the one I'm currently running so no real need to change, but there could be performance reasons to change or maybe something else.
I downloaded to the "official" ROM and updated my phone
I think this is the same ROM as B79, just renamed the version.
Remove the IMEI, not rooted, other MTP driver needed etc.
@cactuz:
What operating system did you use for root the phone?
I'm using Windows, and the new official ICS ROM wants different ADB drivers than the 2.3.6.
Without this, i can't root it, and restore IMEI.
Buntybauva's mass storage problem maybe that the Windows recognize the ICS phone as media device, but can't mount as usb mass storage without a third party program
vzzoli: I used Win7 32bit when I rooted the phone, used the scripts supplied in one of the links in my initial post.
When I restored the IMEI I used Linux since that is my prefered choice whenever using ADB.
I can't check right now what version because I've apparently forgot my VPN-password so I can't connect to my computer at work
Does the camera-switch work for changing between Camera and VideoCam on the new official rom?
hyy
after ics upgrade is anyone facing problem with gps lock?
buntybauva: Not worse than before, the GPS was terrible for me before as well as after (but I do get a fix after quite some time). Though some of the guys on the russian forum has modified the antenna as far as I know.
Maybe DangerD could help us out because I think he has been involved in it.
There are different custom ROM's & root methods for the K860 & K860i. Most of the root methods & ROM's are compatible with both the K860 and K860i. Read the full thread to be sure.
I'll update this post regularly, if there are any changes needed please say so in the thread or PM me (still WIP for adding the latest stuff).
Below you can find everything!
- Root methods & stock ROM's + MOD's/fixes:
There is an APK root method, linked below, or you can use the original not so easy root method:
I did some research on how to root it.
I found some steps on this Chinese website.
What I understand from it is you have to do the following steps to root:
- Set the phone to USB debugging in it's settings
- Make sure drivers are installed and the phone is recognized well by the phone PC software
- Close all the PC phone software applications
- Make sure no other android or smart/USB-device is connected except for the phone itself
- Download this file: root files, download link is also below in the attachment.
- Unzip it and launch the .exe (executable file) with the Chinese characters (should be first .exe in directory)
- The shell/CMD should start the root process
- The phone will automatically restart, don't touch it or any button, don't interrupt the shell program!
- Now after the reboot of the phone you should press any key on your keyboard when asked
- The shell program should continue, the phone will restart again!
- Again press any key to continue and wait for the shell program to reboot your phone for the third time (this can take some time, be patient!)
- When rebooted the "Operation was successful" message should appear in the shell program
- Now your K860 is rooted! Look for the root app in your phone to confirm. If rooting didn't work, try this process again
- Also update the Superuser or superSU app & binaries
Click to expand...
Click to collapse
Root method works, users already confirmed this!
- Easier/better root methods:
Added by kakandariko:
Alternative method.
Added by rugged666:
The same root method as for the P700
Added by jbctiong:
Root apk for K860 + 4.1.2 ROM
- Fixes:
Added by kiotu:
USSD CODE Fix for Native Chinese JB ROMs
Location Service Off FIX
- Stock ROM's:
Added by jbctiong:
Root apk for K860 + 4.1.2 ROM
Added by thongminh:
New rom 4.2.1 Update 24/05/2013
Added by kiotu:
JB 4.2 Latest 130531/30
Added by vikrant82:
K860_1_S_2_003_0020_130605_szb.zip
Added by Holandeserrante:
K860_1_S_2_003_0033_130618_szb.zip & K860i_1_S_2_003_0052_130617_szb.zip
K860_1_S_2_003_0035_130620.szb & K860i_1_S_2_003_0056_130620.szb
K860_1_S_2_003_0036_130621.szb & K860i_1_S_2_003_0057_130621.szb
K860_1_S_2_003_0043_130624.szb & K860i_1_S_2_003_0064_130624.szb & K860_1_S_2_003_0044_130625.szb & K860i_1_S_2_003_0065_130625.szb
- Links to how to add Google Apps:
http://forum.xda-developers.com/show....php?t=1632945
http://forum.xda-developers.com/show....php?t=1582422
Easy method:
Added by Ramanon:
Link
Added by jbctiong:
gapps-jb for 4.1.2/CM10/AOKP ROM
- CWM Recovery
Added by angelsel:
CWM recovery in English for the K860
Added by jbctiong:
Method to Flash Recovery.img for K860
- Custom ROM's.
Added by jbctiong:
"Overseas" Firmware for English users with the Google Apps included.
CM10 (JB 4.1.2), Multi Language, Minor Bugs
More ROM's
Another one.
Newer CM10 ROM
Lidroid v3.1 ROM for K860
AOKP JB 4.1.2 for K860
Added by amoyan:
Lenovo K860 based build ROM with Google Play, no branding, improved battery life
Added by Ramanon:
MIUI ROM for K860i (and K860 as well), beta
Added by Zanderion:
Rooted ROM for k860i
Added by ivantastic:
LIDROID 4.2 (K860)
Added by orgod:
CM10 v.2.5 ROM for K860
Added by thongminh:
Rom Miui Multilanguage update 19/04/2013
Added by kiotu:
kiotu Custom ROM K860 V2.03 - UPDATED 29/06/2013
Added by Holandeserrante:
MIUI ROM K860i 3.6.28
- kiotu kernel
Added by kiotu:
Experimental JB 4.1.2 kernel V4 - UPDATED 12/06/2013
- Other useful international thread about the K860, root, ROM's, ...:
Added by marcoruzza:
Link
I want to note that I'm not responsible for any bricked phone by using these root/ROM's!
It is all at your own risk!
Also backup all data before rooting or flashing the phone!
For the links to the ROM's and other root methods, please Thank those persons!
If you think I helped you with this thread, please hit the Thanks button and make me happy
Is the UI in Chinese?
Arne_B said:
Because I recently bought the Lenovo K860 and am waiting to receive it, I did some research on how to root it
Click to expand...
Click to collapse
I just got this phone/phablet as a gift. Specs are quite a beast: 1.4GHz quad core, 1280x720, 8GB ROM, 8MP camera etc.
Would you know if the Android UI is in Chinese? Right now I have the phone for sale on eBay because as far as I can tell, it's not going to work on AT&T or T-Mobile 3G (or more) in the US.
dandv said:
I just got this phone/phablet as a gift. Specs are quite a beast: 1.4GHz quad core, 1280x720, 8GB ROM, 8MP camera etc.
Would you know if the Android UI is in Chinese? Right now I have the phone for sale on ebay because as far as I can tell, it's not going to work on AT&T or T-Mobile 3G (or more) in the US.
Click to expand...
Click to collapse
Yeah, it's only compatible with GSM Tri-band or maybe Quad-band. But WCDMA is only operating at the 2100MHz band (3G). So I guess mobile surfing will probably work but calling (2G) won't work in the US.
Default UI is Chinese, but it should have English in the settings also and maybe even Vietnamese.
I have a K860
I've bought a Lenovo K860, it works fine in Spain. It comes with english and chinese languages. Easily root as you say before. Over 12400 antutu benchmark in my device, but I see until 14500 in others. The camera works perfect and makes awesome photographies. Games and apps runs very fast, GTAIII, Bard`s Tale, PES12, FIFA12, Asphalt 7....
Cons?
Magnetometer compatibility, by the time I don`t found compass app working.
Only chinese development by the moment. In fact there is a recovery.img available and two or three MIUI roms, aal in chinese only:crying:
If you want any other info, contact me, and sorry my bad english.
superabienator said:
I've bought a Lenovo K860, it works fine in Spain. It comes with english and chinese languages. Easily root as you say before. Over 12400 antutu benchmark in my device, but I see until 14500 in others. The camera works perfect and makes awesome photographies. Games and apps runs very fast, GTAIII, Bard`s Tale, PES12, FIFA12, Asphalt 7....
Cons?
Magnetometer compatibility, by the time I don`t found compass app working.
Only chinese development by the moment. In fact there is a recovery.img available and two or three MIUI roms, aal in chinese only:crying:
If you want any other info, contact me, and sorry my bad english.
Click to expand...
Click to collapse
So you can confirm it is rootable with the above tutorial?
I think my previous smartphone (Galaxy Mini) didn't even have a magnetometer, so if that doesn't work properly I think it won't annoy me.
Arne_B said:
So you can confirm it is rootable with the above tutorial?
I think my previous smartphone (Galaxy Mini) didn't even have a magnetometer, so if that doesn't work properly I think it won't annoy me.
Click to expand...
Click to collapse
Yes, confirmed, it works perfect for me.
And I`m agree with you, magnetometer isn`t big problem, but it work fine in test, fails the app compatibility, I think it´s a rom fail and it will be solved with updates.
---------- Post added at 12:28 PM ---------- Previous post was at 12:23 PM ----------
superabienator said:
Yes, confirmed, it works perfect for me.
And I`m agree with you, magnetometer isn`t big problem, but it work fine in test, fails the app compatibility, I think it´s a rom fail and it will be solved with updates.
Click to expand...
Click to collapse
PD: You must activate gapps by changing the permissions in /system/ by default google apps are prohibited in china.
Messiah sioneyS
superabienator said:
PD: You must activate gapps by changing the permissions in /system/ by default google apps are prohibited in china.
Click to expand...
Click to collapse
So I'll have to enable 775 (rwx-rwx-rw) permissions in that folder?
guys, i am based in china and thought about this phone or the haier x5 pad511.
if the ui is also working in english i ld get it. am just worried lenovo wont release a JB update and if i root it (i have never rooted anything besides a bag of marshmallows) i loose any functionality. is there a JB rom? the miui is pretty ok.
Arne_B said:
So I'll have to enable 775 (rwx-rwx-rw) permissions in that folder?
Click to expand...
Click to collapse
I think yes, you must download gmail.apk, play store, maps.apk, etc, second you must copy and paste with root explorer in/system, and at last open the permissions of any lenovo apk in /system and put the same permissions in google apks.
I hope you understand my bad english.
hi is it easy to replace stock OS? i m in china and want to use english OS and am not sure if the installed OS has google market and so on.
Any advice? would love to run a JB version or MIUI on it
The stock OS has an option to use an English UI. Market and some other Google Apps might not yet be installed.
To do this you can read the following topics:
http://forum.xda-developers.com/showthread.php?t=1632945
http://forum.xda-developers.com/showthread.php?t=1582422
so anyone running the phone on its stock ui or know if the stock ui comes with google play? if not can i just take a g play apk from here and install it on mt k860?
Hello, can I ask to you about the Lenovo.
How about the battery life?
Have stock ui call record?
Have it IP telephony client like in miui?
Thank you a lot
Отправлено с моего MI-ONE Plus через Tapatalk
FelBJ said:
hi is it easy to replace stock OS? i m in china and want to use english OS
Click to expand...
Click to collapse
I read somewhere that the Android it ships with supports Chinese, English, and possibly Vietnamese.
I think you probably read that over here
dandv said:
I read somewhere that the Android it ships with supports Chinese, English, and possibly Vietnamese.
Click to expand...
Click to collapse
yeah thanks i nearly forgot i read it proximately 3 posts prior :angel: anyway, i wanna know if theres an option fro easy market apk install, i hope i dont have to root or anything i thought i can just put market as apk on the sd card and install it.
btw. is the UI great or does it make sence to find a miui jelly beans... i m not sure if lenovo does code a JB
I don't really think there is a way without root for the Lenovo.
Someone reported that it works on a Galaxy 5 (i5503) without doing root:
How To Enable Android Market on i5503 or Galaxy 5 and Galaxy S
Filed under: Android by Ahmed Ali — 38 Comments
December 22, 2010
recently i bought Samsung i5503 (Galaxy 5) and i took more than two weeks to be able to use android on my handset
so i decided to share what i got with u .let’s start
U must move your data from internal memory to external memory
there r two method
The First :
1. ensure your handset “Galaxy 5″ is set to use 24-hour format
(applications-> Settings-> date and time -> Use 24-hour format
2. launch the Phone-pad
3. enter the following
*#272* the follow it with the time on the phone (4 digits) then follow it with #
example, the time on my phone now is 15:33 hence I shall enter *#272*1533#
4. the phone shall display a new window
5. select “XSG” and hit “install”
the Phone shall reload and your “Market Apps” icon which be there
this method didn’t work with me but it works with some friends of mine
The Second Method
1. ensure your handset “Galaxy 5″ is set to use 24-hour format
(applications-> Settings-> date and time -> Use 24-hour format
2. launch the Phone-pad
3. enter *#06# and store the number which will appear
4. in the phone-pad write *#272*xxxxxxxxxxxxxxxxx” xxxxxxxxxxxxxxx is the number u got from step 3
5. the phone shall display a new window
6. select “XSG” and hit “install”
the Phone shall reload and your “Market Apps” icon which be there
enjoy
Thanks To @Khal3d
Click to expand...
Click to collapse
Sorry for the big quote but I can't post any outside links.
is lenovo release the source code for this handheld?
k860 root
So,did you receive your K860.Is it really possible to root without risk
Arne_B said:
Because I recently bought the Lenovo K860 and am waiting to receive it, I did some research on how to root it.
I found some steps on a Chinese website.
What I understand form it is you have to do the following steps to root:
- Set the phone to USB debugging in the settings
- Make sure drivers are installed and the phone is recognized well by the default phone PC software
- Close all the PC phone software applications
- Make sure no other android or smart/USB-device is connected except for the phone itself.
- Download this file: root files
- Unzip it and launch the .exe (executable file) with the Chinese characters (should be first .exe in directory). Launch it with Administrator privileges.
- The shell should start the root process.
- The phone will automatically restart, don't touch it or any button, don't interrupt the shell program!!
- Now after the reboot you should press a key.
- The shell program should continue, the phone will restart again!
- Again press a key to continue and wait for the shell program to reboot your phone for the third time (this can take some time).
- When rebooted the "Operation was successful" message should appear in the shell program.
- Now your K860 is rooted! Look for the root app in your phone to confirm. If rooting didn't work, try this process again.
I want to note that I'm not responsible for any bricked phone by using this root process! I didn't do it myself yet, so it's all at your own risk!
Also backup all data before rooting the phone!
Because I don't have this phone at the moment I can't try to root it just yet. So if anyone got it rooted using this method, let me know!
Click to expand...
Click to collapse
No not yet still waiting for it.
I'll update when I have it and post my findings about routing it and putting Google Play and so on it.
Also, I think that someone in this thread has said this method works
Huawei Honor 2 U9508
models:
U9508/Ascend G615 - 1Gb RAM
U9508B - 2Gb RAM
specs:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROMS & Official Updates (EMUI):
Official updates:
The official updates ordered by BXXX
4.0.4 Updates:
B026 (Older versions: B018,B019,B024,B025) - those version come with the device pre-installed. It’s don’t reccomend to install them. Those version are 4.0.4 Android and they are not include Google Apps.
B107 - This is the official Huawei’s international version. It’s an Android 4.0.4 version Stock (original Google Vanilla UI) which is come with Gapps. Multilanguage version. This version is considered as “Battery Saver” by most of the users in XDA. This version also got the biggest Antutu Benchmark score (15,000-15,500) which achieved in the device.
4.1.2 Updates (Emotion UI):
All of the 4.1.2 updates have the “Emotion UI” interface (more info about EMUI here).
There is only English and Chinese in Emotion UI (Menus).
Right now there is 2 version of Emui - “Emotion UI 1.5” and “Emotion UI 1.6” .
You can download it from here, use google translate.
EMUI 1.5 is the stable build. Emui 1.6 is the development build.
B544 (Older versions: B541,B542,B543) - This is EMUI 1.5 stable build. it have all the futures of Jellybean and the unique interface. Very stable. Don’t include Google Apps.
B624 (Older version: B605,B610,B615,B618,B624) - This is Emui 1.6 Development build. This version include a lot of chinese apps. Don’t include Google Apps.
ROMS:
Xiui 1.2 stable (Older version: 0.9 beta,1,1.1) - based on B624 (EMUI 1.6, Android 4.1.2). All the chinese apps have been deleted. A lot of tweaks. Multilanguage version. Rooted. Include Google Apps. The lanucher is “Smart Lanucher”.
Hiui 1.0 - Based on B624 (EMUI 1.6, Android 4.1.2). All the chinese apps have been deleted. A lot of tweaks. Multilanguage version. Rooted. Include Google Apps. The lanucher is EMUI launcher and it’s include “ME widget” & others...
Miui V4 - Come in 2 version - 3.2.1 Based on Android 4.0.3 - 3.2.2 Based on Android 4.1.2 - you can read about MIUI here. Not include Google Apps. Recommend for 2Gb version only
TouchWiz - Based on B026 (Android 4.0.4). Introducing the known samsung’s interface - “Touchwiz”. Not include Google Apps.
Other Download:
Kernel for Jellybean version *ONLY* - The updated kernel which in B624 version.
Recovery6.0.1.9_AscendHonor2.exe - this EXE file is required to replace the Recovery to the Chinese Recovery or back to the Original Recovery.
Google Apps for Jellybean *ONLY*
Google Apps for ICS *ONLY*
SuperSU - Root controller App. You need this app to have ROOT.
Guides:
How to install Official Updates -
Method number 1 - Required EMUI:
Donwload official update which come as a Zip file.
In the Zip file there is a folder called “dload”. Extract its to the root library of the SD card.
Open Settings app.
Go to “About Phone” and then choose “System updates”.
Choose “Update via SD card” and then “Confirm”.
The device will reboot into the “Update installer” and then he will install the update.
If the installation successed, the device will reboot into the new version, if not it will reboot into the version which you have right now.
Method number 2 - Required Original Recovery (can be custom ROM)
Donwload official update which come as a Zip file.
In the Zip file there is a folder called “dload”. Extract its to the root library of the SD card.
Turn off the phone.
Boot up the phone with POWER & Volume + & Volume -
The device will reboot into the “Update installer” and then he will install the update.
If the installation succeeded, the device will reboot into the new version, if not it will reboot into the version which you have right now.
How to Replace Recovery -
U9508 have 2 types of Recovery - The original for the official updates - the chinese for everything else.
Open setting app.
Disable Fastboot option. Go to “Developer options” and enable “USB debugging”.
Connect the device into the USB. Choose “USB storage device”.
Open “Recovery6.0.1.9_AscendHonor2.exe”.
Now you have 2 options - 1 for The chinese recovery, 2 for The original recovery.
Write the number that you have choosen and press Enter.
If all is OK, the program will do its job - Reboot into FASTBOOT MOD, Flash the selected recovery and then reboot the device.
your selected recovery have been installed.
How to install custom ROM -
You will need the Chinese Recovery to install custom ROM.
This guide work with MIUI,HIUI,XIUI,TouchWiz...
Put the ROM on the SD card
Go to recovery by Turning off the device and then booting up the phone with POWER & Volume +
First you need to wipe all your data, Select the 4th option and then the first option [Wipe Data/Factory reset]
Now when your phone is empty you can install new ROM, Select the 2nd option and then 4th option.
Now select the Zip file of the ROM.
Select the first option, Now the ROM will be installed.
Now choose the “GO BACK” option (The last one) and then choose the first option - Now your phone will reboot
If the installation succeeded, After few minutes your phone will boot up to the new ROM.
How to install Google Apps or SuperSU -
This guide is almost the same as installing ROM, you just don’t need to wipe your data
This guide is also for installing kernel.
Put Gapps/SuperSU on your SD card.
Go to recovery by Turning off the device and then booting up the phone with POWER & Volume +
Select the 2nd option and then 4th option.
Now select the Zip file of the Gapps/SuperSU.
Select the first option, Now Gapps/SuperSU will be installed.
Now choose the “GO BACK” option (The last one) and then choose the first option - Now your phone will reboot
If the installation succeeded, After a minute your phone will boot up with Gapps/SuperSU.
You can check it by search in your apps for Google Play or SuperSU app.
https://docs.google.com/spreadsheet/ccc?key=0AhUNCXEc3xD4dHJEM21Yd201Z3dydjRwUFRsUUthWmc#gid=0
this F.A.Q made by Yoavst ALL CREDITS GOES TO HIM, THANKS FOR CONTRIBUTING.
Huawei Honor 2 U9508 1G
Hi
New to the board and I did something rash and bought a Huawei Honor 2 U9508 8G 1G ram direct from China. Its arrived and looks great and even the camera is a pleasant surprise )
I have some understanding of rooting having owned a HP Touchpad and a Ainol Fire/Flambe but I am no expert and can easily become lost in all the steps.
So my question is...
Can this phone be de-chinesed? I have managed to root it using a tool from BinAry (how cool is that tool!) now I would be happy just getting a UK Google Play installed until the community gets hacking.
Any help appreciated (Mod please move to a relevant thread if necessary)
Cheers
Steve
root
better root this phone by using "root with restore by Bin4Try", if you are on stock 4.0 (it doesn't work with 4.1.2 on this device)
to get gapps including play store fully working just download latest ics version, unpack it and copy files using root explorer. or download
this and assuming you already rooted (and having hisuite or huawei usb drivers installed) connect the phone to pc and run install.bat, look at the display and allow su root privileges when asked
most of the chinese stuff are under /data/cust/delapp, just delete it
Cheers
apnoia said:
better root this phone by using "root with restore by Bin4Try", if you are on stock 4.0 (it doesn't work with 4.1.2 on this device)
to get gapps including play store fully working just download latest ics version, unpack it and copy files using root explorer. or download
mediafire /?o6r3ytju53885roand assuming you already rooted (and having hisuite or huawei usb drivers installed) connect the phone to pc and run install.bat, look at the display and allow su root privileges when asked
most of the chinese stuff are under /data/cust/delapp, just delete it
Click to expand...
Click to collapse
Great thank you, I hope it is that simple and wont brick the phone. This is the response from Huawei
Thank you for contacting Huawei device.
Sorry about because there has many different customizations in different countries’ carrier operators’ customized.
So you can’t upgrade your device which has bought in China to a oversea Android version.
And because of the law in China that all Huawei Smartphone which has sold in China all can’t support Google Play.
So your device which has bought in China also can’t support it.
Click to expand...
Click to collapse
Would anyone else (perhaps mods) +1 this to boost my confidence in the attached files ....
Steve
sharries said:
Great thank you, I hope it is that simple and wont brick the phone. This is the response from Huawei Steve
Click to expand...
Click to collapse
yes, they need to obey the law at least until they release this phone to international markets, however, technically they do support everything just fine, all languages and the rest, it's just disabled or removed, but you can update it to "to a oversea Android version" see attached screenshots
chances you brick the phone with root and putting gapps are very low, but the risk is still always there. however if you didn't alter the bootloader in most cases you can still restore this phone into a working state
sharries said:
Great thank you, I hope it is that simple and wont brick the phone. This is the response from Huawei
Would anyone else (perhaps mods) +1 this to boost my confidence in the attached files ....
Steve
Click to expand...
Click to collapse
Worked a treat thank you :victory:
Thank you so much for the fix.
How did you get the languages? Mine has US English and Chinese only and I need UK
I am planning on buying the 2G 32GB for $405 and I see yours is 4.1.2 Are there any issue rooting that phone?
Steve
you probably can try morelocale2, but I prefer to do it natively, it works well for me on 4.1.2 emui beta and I suppose it will work on 4.0 as well
find this file /сust/channel/cn/xml/hw_defaults.xml look for white_languages string, delete those lines with Chinese and English only, and uncomment white_languages where all languages specified.
it should look like this
Code:
<string white_languages="zh_CN,en_GB,en_US,pt_PT,es_ES,fr_FR,de_DE,ru_RU,it_IT,zh_TW,zh_HK,es_US,pt_BR,ja_JP,sv_SE,nb_NO,da_DK,tr_TR,cs_CZ,sk_SK,hu_HU,pl_PL,el_GR,et_EE,lv_LV,lt_LT,sl_SI,fi_FI,mk_MK,bg_BG,hr_HR,ro_RO,ar_EG,sr_RS,vi_VN,in_ID,bs_BA,uk_UA,fa_IR,th_TH,ms_MY,nl_NL,ko_KR,en_AU"/>
the only drawback is that you need to make factory data reset (no need to clear sdcard though) in order to make the changes to take effect.
remember if you break the xml formatting it may break something in the phone settings, so you might need to restore the whole firmware
sharries said:
Thank you so much for the fix.
How did you get the languages? Mine has US English and Chinese only and I need UK
Steve
Click to expand...
Click to collapse
Thanks again, I added one further question to the above post, you must have read it before I edited it...
I am planning on buying the 2G 32GB for $405 and I see yours is 4.1.2 Are there any issue rooting that phone, or better still how do you root the 4.1.2 if you cant use bin4ry?
Steve
Not sure about 32GB version, I've seen only 8GB ROM which can be extended with sdcard only, with 1GB or 2GB of RAM, which cost around $380 now or $30 more with express shipping.
As of root and 4.1.2 version, I've got that on some Chinese site, there's a dev there who making prerooted rom images for U9508 based on EMUI beta. But my phone came with stock 4.0.4 version installed by default. I've installed 4.1.2 myself and customized it a bit for my needs, including languages, gapps, etc.
sharries said:
Thanks again, I added one further question to the above post, you must have read it before I edited it...
I am planning on buying the 2G 32GB for $405 and I see yours is 4.1.2 Are there any issue rooting that phone, or better still how do you root the 4.1.2 if you cant use bin4ry?
Steve
Click to expand...
Click to collapse
apnoia, does greek (Ελληνικά) language work? Also, where did you find 4.1 rom?
gerstavros said:
apnoia, does greek (Ελληνικά) language work? Also, where did you find 4.1 rom?
Click to expand...
Click to collapse
Yes, it does have Greek in the menu, but I can't tell for sure if everything is translated well. Huawei customized 4.1 and added it's own launcher, and called all this EMUI. It's still in early beta and not publicly available though. I will make a guide on how to update to 4.1.2 but a little bit later.
If you've got this phone and want to enable your language in stock rom, try with "white_languages" method I've posted above.
apnoia said:
Yes, it does have Greek in the menu, but I can't tell for sure if everything is translated well. Huawei customized 4.1 and added it's own launcher, and called all this EMUI. It's still in early beta and not publicly available though. I will make a guide on how to update to 4.1.2 but a little bit later.
If you've got this phone and want to enable your language in stock rom, try with "white_languages" method I've posted above.
Click to expand...
Click to collapse
If you set greek and it's not in english, then it's ok! Nice, i 've not bought yet but i ''ll order by christmas probably for a friend
My Experience with the U9508
I just bought this last week while I was in Beijing. The salesman sold that for 1900 RMB but after paying I found that it was a locked version and I had to pay additional 200 RMB for an export set. The normal China Mobile and other phone shops don't carry this model and can only be found in their geek pc/handphone commercial district. Even then the shops there don't carry physical stocks but must run upstairs to the export offices.
This phone has it's own Huawei Shop which is crap and the first thing is to root it with the Bin4Try method. Then comes the big problem when I tried sideloading the Google stuff. Everything installs but won't run. I found out that the root System/Apps folder is non-writable so all the stuff that I tried installing didn't make it there. In a separate thread I read about using the ES Root File Explorer and reset the file permission of that directory. Copy the needed files to the SD card first and then use ES to rewrite the folder permission and copy the files over. (http://www.youtube.com/watch?v=Hfam7mCOAAo)
Good to go! But only after much anguish since I did everything on my own without this guide. BTW, there's a very good app called APK Extractor from Play. This repacks installed apps on your old phone so you can email it off to your new phone to install when you don't have Play initially. I find that this is faster than loading from SD card.
It's not as smooth as my Nexus 7 but it's a really cheap and good quad-core phone. Yah the camera has a weird and unusual focal length. It's got a bright screen like Samsung too so that's a bonus.
apnoia I would really appreciate if you can put out your guide to 4.12 help.
gapps issue
Hi,
I've received my Huawei U9508 2G today \o/
I've got it from China, from an internet seller (merimobiles, to be precise). I didn't ask for it, but the first time I turned it on, it was already rooted. There was also a special installer for useful apps such as morelocale2, the google play store and google synchronization services.
I was very happy with it... until I've realized that some google apps just wont work. For example, Google+ tells me "Couldnt connect to server" when I open it, then I click OK and then it shows me the list of synchronized google accounts, I select mine and it goes again with "Couldnt connect to server" (I'm connected and can access other internet services...).
Mytracks asks to install "google play services" but when I do, I get an error: "incompatible with other application using the same shared user id". Google maps won't allow me to log in neither.
So I tried to reinstall the gapps using the method of the first post from apnoia, ... and nothing worked anymore, not even the play store... I figured this was because of the files rights. So after a busybox chown root:root *.apk, I have got the synchronization of gmail contacts, calendar and google drive working. But apart from that, I'm back to square one.
I also tried the script from apnoia with another image, namely gapps-ics-20120429-signed.zip from goo.im but I think that's not better.
Now, there are some issues that I don't think I had seen before: right from the android's start, youtube, google talk and google partners services crash with no action from me.
Sometimes I have a notification: "permission required (for account [email protected])" but if I try to open it, it doesn't do anything. I've found another guy facing the same issue with the smartphone (www[dot]swedroid[dot]se/forum/showthread.php?p=1194895 -- I don't speak swedish neither, thats why I didn't reply ).
I'd really like to get the google apps working well. No one has got the issue here ?
Do you think that a factory reset would fix this ?
Thank you!
n1m4i, yes try full factory reset, should help with your issue. otherwise reflash firmware, root and install gapps
btw, I think not a lot of people have this phone outside of china yet
4.1.2
My U9580 2G will arrive in a few days from China.
I suppose i will also run into the same problems with the others users,as it concern
the Play store and Google apps.
I also would like to read the guide for the update to 4.1.2 multilingual rom.
Apnoia,can you please make the guide for us?
apnoia said:
n1m4i, yes try full factory reset, should help with your issue. otherwise reflash firmware, root and install gapps
btw, I think not a lot of people have this phone outside of china yet
Click to expand...
Click to collapse
The factory reset did the trick! Thank you
At least google talk. I'll edit the post if there remains some issues yet.
Well, for those who want to try the factory reset like me... Be prepared to have to configure the phone while it's all in chinese :silly:
Just kidding, actually you can change the language to english pretty soon in the wizard.. but still, that's a bit confusing for the 2 first screens...
Have you tried my approach to copying the Google files right into the systems/apps directory? That solved my problems.
n1m4i said:
Hi,
I've received my Huawei U9508 2G today \o/
I've got it from China, from an internet seller (merimobiles, to be precise). I didn't ask for it, but the first time I turned it on, it was already rooted. There was also a special installer for useful apps such as morelocale2, the google play store and google synchronization services.
I was very happy with it... until I've realized that some google apps just wont work. For example, Google+ tells me "Couldnt connect to server" when I open it, then I click OK and then it shows me the list of synchronized google accounts, I select mine and it goes again with "Couldnt connect to server" (I'm connected and can access other internet services...).
Mytracks asks to install "google play services" but when I do, I get an error: "incompatible with other application using the same shared user id". Google maps won't allow me to log in neither.
So I tried to reinstall the gapps using the method of the first post from apnoia, ... and nothing worked anymore, not even the play store... I figured this was because of the files rights. So after a busybox chown root:root *.apk, I have got the synchronization of gmail contacts, calendar and google drive working. But apart from that, I'm back to square one.
I also tried the script from apnoia with another image, namely gapps-ics-20120429-signed.zip from goo.im but I think that's not better.
Now, there are some issues that I don't think I had seen before: right from the android's start, youtube, google talk and google partners services crash with no action from me.
Sometimes I have a notification: "permission required (for account [email protected])" but if I try to open it, it doesn't do anything. I've found another guy facing the same issue with the smartphone (www[dot]swedroid[dot]se/forum/showthread.php?p=1194895 -- I don't speak swedish neither, thats why I didn't reply ).
I'd really like to get the google apps working well. No one has got the issue here ?
Do you think that a factory reset would fix this ?
Thank you!
Click to expand...
Click to collapse
---------- Post added at 05:26 AM ---------- Previous post was at 05:24 AM ----------
The Beijing phone stall guy was surprised that a foreigner goes into China just to buy a China made phone. He definitely is not a phone geek.
Mark Chia said:
Have you tried my approach to copying the Google files right into the systems/apps directory? That solved my problems.
Click to expand...
Click to collapse
Yes, that was kinda the apnoia's solution. Finally that's what did the trick but I assume there were some conflicts with the seller's softwares that prevented it from working before the factory reset.
Conclusion: if you've commanded your phone from merimobiles, don't waste your time, flash the gapps right away and factory reset the thing before installing apps on the phone...
Finally, after a series of studies and tests not always gone well, it turns out the first alternative to the official firmware ROM.
Unfortunately we are not yet able to have control on the terminal, since no one on the horizon hopes to release source code, but surely it is still a revolutionary firmware, and although it is a photocopy of the stock firmware, once installed you will not need to make any other changes especially.
Nuff said, I shall list the features of this ROM, as amended and then inside:
PERFECT ROM V1:
1) Based on the latest version of the stock firmware (31/12/2015);
2) Root included;
3) BusyBox included;
4) Recovery TWRP included;
5) BOOT.IMG unlocked;
6) Firmware fully translated into Italian (some applications had not the Italian language);
7) Customizing the boot logo;
8) Customization of the animation in the opening;
9) Make changes to build.prop;
PERFECT ROM V2:
1) Based on the latest version of the stock firmware (28/01/2016);
2) Root included;
3) BusyBox included;
4) Recovery TWRP included;
5) BOOT.IMG unlocked;
6) Firmware fully translated into Italian (some applications had not the Italian language);
7) Customizing the boot logo;
8) Customization of the boot animation;
9) Make changes to build.prop;
10) Removed applications "CallerId Search", "JIAJINAgingTest" and Launcher iBingo (potential sources of malware);
11) Added launcher "Smart Launcher" to replace iBingo (optional and uninstallable);
12) Added Chronos widget (in system);
13) Added notification tones.
IMPORTANT!!!
The V2 version was released in 2 versions:
1) FULL VERSION FIRMWARE - full Firmware of all its parts, ideal for those who want to flash the complete firmware and especially for those who do not possess the V1 version of " Perfect ROM ";
2) VERSION UPDATE - The same firmware, but which inside contains ONLY UPDATES from version 1 to version 2. Designed for those who already have the V1 version and wants to upgrade to the new firmware version, without losing anything.
Whatever version of the firmware you chose to put, the ROM is flashed as if it were in effect an official firmware, then using SP Flash Tool.
Council staff, it is a ROM-based firmware official, who wanted to avoid losing your personal data (applications, etc.), can make advance the backup of your existing firmware and, after you install and configure this, restore its back-up created ONLY PART OF USERDATA !!!! You will have the new firmware, but with your personal data. On how to back up, I refer you to post already abundantly treated on site.
I avoid putting screenshoot, would not make sense as a question of changing the official firmware that we all know.
Since this is a first version, I think it goes without saying that all users are welcome tips, questions, clarifications, report problems and mistakes and all you can relate to this ROM ONLY.
NEW!!!
Menu Reboot original
I have created the file "Reboot original" in order to don't have anymore the reboot menu in italian language. This file you can use ONLY ON "PERFECT ROM V2". I'm not sure that will work if you use it on V1 version.
This is the file to flash with TWRP: Reboot original
THANKS:
- Bovirus (for teaching me a lot about mediatek and supported)
- Complicazio (for supporting me and especially born as BETA-TESTER)
- All those who in any way make you an active part to improve this little project
DOWNLOAD:
FIRMWARE:
- Perfect-ROM V 1.0
- Perfect-ROM V 2.0 (FULL FIRMWARE)
- Perfect-ROM V 2.0 (UPDATE)
BUGFIX:
- STAGEFRIGHT2.0 FIX
....reserved for future use.....
Hi,
Can you say what changes/tweaks you have made to the build.prop?
Hi
I just installed your rom, I will give you my feedback.
Thanks in advance..
---------- Post added at 01:48 AM ---------- Previous post was at 01:40 AM ----------
What do you mean by "Unfortunately we are not yet able to have control on the terminal" what is is you cannot do?
Rooting my Ulefone Paris
I want to get root access on my Ulefone Paris and Ulefone Be X too but the Paris first so i have downloaded from one drive the original Firmware or in case things go wrong, But in my search i came across your ROM MOD PERFECT ROM V 1.0 so now as i do not properly understand the root process with the TWRP thing i am wondering if it might be easier for me to just install your ROM MOD, in the description it says root included and it is also based on the original software supplied with the phone,that is if i understand correctly. So i'm just after the easiest most foolproof way to get ROOT there is nothing on the phone i can't replace i have only had it a few weeks, it is KERNEL VERSION
3.10.65
minjiawei rcbuildsrv6-PowerEdge-R720 #3
Fri Oct 16 15:10:11 CST 2015
Build Number
S511_E1_GQ3025AH2_PARIS_20151016 Lollipop 5.1 so i'm asking if you think it might be just as good for me to download you ROM and use that, if so can you explain how
I have 2 other Android devices with ROOT But i done them with Kingo Root and that just fails on the Paris
Thanks for any help you can offer,
Stever39 ah i can't post i have an outside link somewhere, i will try delete it ,i deleted an AT e-mail after minjiawei i will try post again,that was not it so i deleted all of you ROM Information
Stever39 said:
I want to get root access on my Ulefone Paris and Ulefone Be X too but the Paris first so i have downloaded from one drive the original Firmware or in case things go wrong, But in my search i came across your ROM MOD PERFECT ROM V 1.0 so now as i do not properly understand the root process with the TWRP thing i am wondering if it might be easier for me to just install your ROM MOD, in the description it says root included and it is also based on the original software supplied with the phone,that is if i understand correctly. So i'm just after the easiest most foolproof way to get ROOT there is nothing on the phone i can't replace i have only had it a few weeks, it is KERNEL VERSION
3.10.65
minjiawei rcbuildsrv6-PowerEdge-R720 #3
Fri Oct 16 15:10:11 CST 2015
Build Number
S511_E1_GQ3025AH2_PARIS_20151016 Lollipop 5.1 so i'm asking if you think it might be just as good for me to download you ROM and use that, if so can you explain how
I have 2 other Android devices with ROOT But i done them with Kingo Root and that just fails on the Paris
Thanks for any help you can offer,
Stever39 ah i can't post i have an outside link somewhere, i will try delete it ,i deleted an AT e-mail after minjiawei i will try post again,that was not it so i deleted all of you ROM Information
Click to expand...
Click to collapse
Yes, is correct....if you flash this "PERFECT ROM" you'll never need to improve others mod, because all the mods (root, recovery, busybox, etc) are integrated in my ROM.
I called the ROM in this mode, because you non need to do anithing after the installation!!!
P.S. I'm sorry for my poor english
Thank you
cuvetto said:
Yes, is correct....if you flash this "PERFECT ROM" you'll never need to improve others mod, because all the mods (root, recovery, busybox, etc) are integrated in my ROM.
I called the ROM in this mode, because you non need to do anithing after the installation!!!
P.S. I'm sorry for my poor english
Click to expand...
Click to collapse
Thank you for your reply, I have not tried it yet,but i think i will. I will read about it and get familiar with the installation process and when i have gained the confidence i will install it. it might be a while i might practice on an older cheaper phone first but when it is done i will let you know how things are. Thank you again for your reply, i am very grateful
Steve :fingers-crossed:
Keeping my data
Dear, I would like to ask is tthere a way to keep my data after installing yourrom!!?
can add some screenshots
Nour-Fes said:
Dear, I would like to ask is tthere a way to keep my data after installing yourrom!!?
can add some screenshots
Click to expand...
Click to collapse
Yes is possible.... Is all wrote on first post, no need any screenshot!!!
Inviato dal mio Paris con Tapatalk 2
@cuvetto
I'm trying to install your ROM with the official Flashing Tool_v3.1504 but I am running into problems (comports and checksums).
Can I install your Perfect ROM with the other SP_Flash_Tool_5.1532? If yes, where can I find the instructions to install the full ROM as a firmware upgrade? Are they the same as for installing just TWRP as you describe in your other post?
Thank you in advance
SolGarlic said:
@cuvetto
I'm trying to install your ROM with the official Flashing Tool_v3.1504 but I am running into problems (comports and checksums).
Can I install your Perfect ROM with the other SP_Flash_Tool_5.1532? If yes, where can I find the instructions to install the full ROM as a firmware upgrade? Are they the same as for installing just TWRP as you describe in your other post?
Thank you in advance
Click to expand...
Click to collapse
Yes, use SP Flash Tool and follow the guide that you can find in my post, like as TWRP
Inviato dal mio Paris con Tapatalk 2
cuvetto said:
Yes, use SP Flash Tool and follow the guide that you can find in my post, like as TWRP
Inviato dal mio Paris con Tapatalk 2
Click to expand...
Click to collapse
@cuvetto
Using firmware-upgrade, and all boxes ticked?)
Like this (see attachment)
--------------
Did that and went OK.
Your translating efforts went a bit too far: even when I choose Portuguese language there are some things in Italian!
SolGarlic said:
@cuvetto
Using firmware-upgrade, and all boxes ticked?)
Like this (see attachment)
--------------
Did that and went OK.
Your translating efforts went a bit too far: even when I choose Portuguese language there are some things in Italian!
Click to expand...
Click to collapse
The lonly thing in italian is reboot menu, the other part of firmware is multilanguage....
Inviato dal mio Paris con Tapatalk 2
cuvetto said:
The lonly thing in italian is reboot menu, the other part of firmware is multilanguage....
Inviato dal mio Paris con Tapatalk 2
Click to expand...
Click to collapse
The notifications when connected through USB to the PC are also in italian, but it's OK, np.
When will it again be an update
how to format the stock rom
hi...i want to format the stock rom because i installed accidentally a malware from playstore that i cant delete with any malware software and the only thing i can do now is to deactivate the file that is infected.
1)i know hot to root the phone but i must first delete the virus...can i format the stock rom with SP Flash Tool?
2)to install perfect rom i just have to download it with sp tool and thats it?
2)if i root the phone ulefone says that we cant receive any updates....so if i choose to install the official updated rom how can i get any future updates? i read somewhere that i can have updates if i reinstall the official flashing Tool v3.1504 , is it true or must i do something else to have updates?
3)can you suggest me any good malware software to avoid future infections.
thanks for your time.
"Perfect ROM V 2.0"
Available on the first page, version "FULL FIRMWARE", designed for people who want to flash the full firmware.
For those who already have the 1.0 version, I'm uploading an "UPDATE" version where there is the opportunity to flash only the changes between the two versions.
Both have to be flashed with SP Flash Tool and you can not flash through recovery. Obviously those who make the UPDATE, do not lose anything, the only changes will be the improvements of the last released firmware (28.01.2016).
IMEI issue
Hi, I downloaded and installed the V2 full rom without any problem... when the phone booted the first time I noticed that there was no signal for either sim cards. I dialed #*06* and saw there was no imei on either. I search on the web for a solution and found a program called "Maui META 3G" and with it I could write the two imei numbers on the phone again... I thought that with this procedure the problem would be solved, but only the first sim card is working, the second one is recognized by the phone and it ask me wich sim card i want to use for calling, data connection and sms, but no signal for the second one... then thinking that the second sim was broken I swapped them and the same happend, the second one was not working and the first one was working. both imei are good now but the sim card I put on the second slot does not works.
Can you help me please?
Hi Cuvetto,
great work creating a custom rom, intend to install this weekend, but i don't want to get into trouble like intolko.
Shoud IMEI also be backed up with MtkDroidTool and should after flashing your rom also be restored like userdata ?
And what about mac address, need that also user attention or should that be no problem ?
Thanks for any clearance,
Shotfac
intolko said:
Hi, I downloaded and installed the V2 full rom without any problem... when the phone booted the first time I noticed that there was no signal for either sim cards. I dialed #*06* and saw there was no imei on either. I search on the web for a solution and found a program called "Maui META 3G" and with it I could write the two imei numbers on the phone again... I thought that with this procedure the problem would be solved, but only the first sim card is working, the second one is recognized by the phone and it ask me wich sim card i want to use for calling, data connection and sms, but no signal for the second one... then thinking that the second sim was broken I swapped them and the same happend, the second one was not working and the first one was working. both imei are good now but the sim card I put on the second slot does not works.
Can you help me please?
Click to expand...
Click to collapse
I think that you flashed the rom using "Format all+download" and in this mode, you lose your IMEI.
To restore your IMEI, you can also use other procedure (MobileUncle is an App for this, but don't take it from Playstore, Take it from internet or blackmarket).
I'm sorry for your problem, but noone installed my rom had IMEI problem.
shotfac said:
Hi Cuvetto,
great work creating a custom rom, intend to install this weekend, but i don't want to get into trouble like intolko.
Shoud IMEI also be backed up with MtkDroidTool and should after flashing your rom also be restored like userdata ?
And what about mac address, need that also user attention or should that be no problem ?
Thanks for any clearance,
Shotfac
Click to expand...
Click to collapse
If you want, you can create a bak-up of your IMEI with MobileUncle, (I suggest to do everybody, is a safety procedure)
MTKdroid, doesn't work with our smartphone, you can manage our smartphone, with MobileUncle (take it from blackmarket or internet, not on playstore).
Many people ahve installed my rom, and never noone have lost the IMEI, maybe intolko has made confusion during the flashing procedure.
Hi all. My dad bought a Huawei Enjoy 7 from China, but we can't figure out how to install Google Apps on it.
Any help is appreciated!
finkploydz said:
Hi all. My dad bought a Huawei Enjoy 7 from China, but we can't figure out how to install Google Apps on it.
Any help is appreciated!
Click to expand...
Click to collapse
Able to elaborate on that? Do you have the Google Playstore but the apps are not getting installed or you do not have the Google Playstore?
As I know, general GMS Core doesn't support Enjoy 7. But I found a post about GMS for it as below. FYI.
https://forum.xda-developers.com/general/help/how-to-install-google-play-store-huawei-t3699190
Bought the same phone in china and I'm also not able to install google play in it. As James_Watson said, looks like there's no support for the required GMS core packages on it.
This theard he pointed out however, points to solutions for the enjoy 7 plus, that despite the similar name, seems to be a completely different phone. In another thread a user named XiaoMigue was able to use the room of a indian equivalent phone to extract the system files and thru a complicated process, flash it in his phone and was able to make it work.
The Enjoy 7 (sla-al00) on the other hand, doesn't seem to even have a twrp recovery that works untill now. I was able to unlock the bootloader and use adb to make a few tests, but not much further. Discovered that there's a phone called Y6 Pro 2017 (sla-l22) being sold in Europe, that looks the same as ours. When there's a twrp, thing i'll try to load it's stock rom on mine.
Hi I have the same issue. Could not find any ROM for sla-al00 for enjoy 7. U can't start up tarp but can connect via adb to issue command. Flash enjoy7 plus Rom but can't work when restart. Have to reset back to factory. Do u have the link to Rom sla-i22?
anyone any luck to instal gapps? snapchat and you tube needs google play services to work....
Has anyone seen custom rom for chinese huawei sla-tl10 Enjoy 7
I finally found a twrp that work with the sla-al00, take ou the spaces and use google translator to find the download link in the bottom of this page:
www huaweirom com /rom/changxiang7/5718.html
Couldn"t use to install anything yet, but it work and it"s a start
Easy way in install Google Services for Huawei Enjoy 7 Plus
After searching for many weeks,I found this apk works good for Enjoy 7 Plus.
Btw,my version is end with B220,but I think it could works for any Enjoy 7.
Hope you like it.
I shared my file in my onedrive. It not allows to post an url outside this site,so you need to delete the plus.
https: + //1drv.ms/f/s!AsTT0kfjDG2bgSDicG-zMQHILvud
lucasresende said:
I finally found a twrp that work with the sla-al00, take ou the spaces and use google translator to find the download link in the bottom of this page:
www huaweirom com /rom/changxiang7/5718.html
Couldn"t use to install anything yet, but it work and it"s a start
Click to expand...
Click to collapse
As shown in screenshots, the user interface of this TWRP seems to be in Chinese language.
Does it also include English language?
---------- Post added at 06:27 PM ---------- Previous post was at 06:19 PM ----------
Is there someone who compiled/developed/"ported" a build/release of TWRP for SLA series?
A solution working here
HEY
if you still got that huawei without play store, check this sub here:
https://forum.xda-developers.com/ge...tall-gapps-huawei-enjoy-7-plus-t3656711/page5
enjoy
If this issue hasnt bee resolved for you, here is what you need to do.
You have to install correct version of GMS installer and then correct version of Google Installer in order to get play store on this phone. I have done an extensive guide on this.
You can find it here: https://www.oscrunch.com/2018/12/11/play-store-huawei-honor-chinese/
If anybody still needs help with this, I managed to install Google Play Store on SLA-AL00.
The solution in this video worked, no need for root, https://www.youtube.com/watch?v=i0Q7n_q879k
But I had to use a different Google Installer downloaded from here: https://techbeasts.com/play-store-huawei-honor-chinese/