Hey guys,
Im currently using a i727r on ICS and i seem to have a really weird problem. I seem to be able to call when I flash a rom, but then out of the blue, it just stops working and i cannot make any calls. I can still send texts and stuff but just no calling. I have tried both UCLD and UCLC modems and roms but I still get the same problem. However, this problem doesnt happen on GB with the UCLA modem.
Is anyone else experiencing this problem, and if so did you solve it? Thanks for the feedback
I bet if you posted your question here http://forum.xda-developers.com/forumdisplay.php?f=1401
You would recieve some answers.
silver03wrx said:
I bet if you posted your question here http://forum.xda-developers.com/forumdisplay.php?f=1401
You would recieve some answers.
Click to expand...
Click to collapse
goin hard on the newbies today aintcha?
Woops!
Well i meant for this to be mostly stating a problem i realized with ICS rather then a question thats why I thought I would post here.
Rogers
I see you're on Rogers, like me.
Turns out the modem settings default to ATT so the GSM band is limited to ATT.
You have to go *#2263# in the phone dialer
- Select GSM Band Preference
- Select GSM ALL
- hit the left haptic button and select END
I hope this helps.
EDIT: Doh! I just realized this turns off data. Must be something wrong with the LTE APN setting.
fly32 said:
I see you're on Rogers, like me.
Turns out the modem settings default to ATT so the GSM band is limited to ATT.
You have to go *#2263# in the phone dialer
- Select GSM Band Preference
- Select GSM ALL
- hit the left haptic button and select END
I hope this helps.
EDIT: Doh! I just realized this turns off data. Must be something wrong with the LTE APN setting.
Click to expand...
Click to collapse
Ya I just realized that too. Thanks for the help anyways, guess im sticking to GB
OK so I was able to narrow the problem down.
So, I flashed ICS, calls worked.
Changed APNs still worked no LTE though.
Finally, did the *#2263# and set the LTE band as prefered. Then I rebooted, and I got LTE but lost calling.
So its definitly the band or the apn thats causing this problem. So now its just choose between LTE or calling which sucks.
Hope that helps.
Going to try the UCLD2 roms now, ill report back in a few
tehee said:
OK so I was able to narrow the problem down.
So, I flashed ICS, calls worked.
Changed APNs still worked no LTE though.
Finally, did the *#2263# and set the LTE band as prefered. Then I rebooted, and I got LTE but lost calling.
So its definitly the band or the apn thats causing this problem. So now its just choose between LTE or calling which sucks.
Hope that helps.
Going to try the UCLD2 roms now, ill report back in a few
Click to expand...
Click to collapse
uhh bud, the problem could be u only half did this right. After u enable all lte bands u have to menu > exit, dial back in using *#2263#* and then select automatic and then reboot.
There is no such thing as voice over LTE, its data only. When in call ur phone automatically switches to 4g, but u have auto turned off right now
icenight89 said:
uhh bud, the problem could be u only half did this right. After u enable all lte bands u have to menu > exit, dial back in using *#2263#* and then select automatic and then reboot.
There is no such thing as voice over LTE, its data only. When in call ur phone automatically switches to 4g, but u have auto turned off right now
Click to expand...
Click to collapse
Oh alright, well Im not gunna try that right now as i got it to work on UCLD2 modem and dont want to mess it up.
But ya thanks for the help everyone
I solved it by adding these 3 APNs. You also need to go back into *#2263# and select LTE, let it establish connection, then go back and change it to Automatic. Note that LTE isn't everywhere so just because you don't get LTE doesn't mean it doesn't work.
Name: Rogers LTE Internet
APN: ltemobile.apn
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS port: 80
MMC: 302
MNC: 702
APN type: internet + mms
Note: Bearer is set to "Unspecified" -- this is the real culprit since AT&T instructions say to set to LTE.
However, I set up these 2 just in case:
Name: Rogers
APN: internet.com
User name: wapuser1
Password: wap
MMC: 302
MNC: 720
APN type: internet + mms
Name: Rogers MMS
APN: media.com
Username: media
Password: mda01
Server: 172.25.0.107
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
APN Type: mms
Related
Has anyone unlocked their captivate? how did you do so, buy an unlock code? and has any one attempted to use it with tmobile tzones hack. since it is quad band, technically it should work with tmobile 3g and since tmobile doesnt have the imei's the tzones hack should theoretically work. i am just looking for conformation before i give up my nexus for this device.
any one have any insights?
No unlock yet. Check around the forums. It's being discussed here:
hxxp://forum.xda-developers.com/showthread.php?t=729284
Sorry to bust your bubble, but the AT&T Samsung Captivate handles these 3G bands [3G UMTS/HSDPA (850/900/1900/2100 MHz)].
Notice that there is no 1700 (AWS) band, which is Tmobile's 3G band. So at most even if you successfully get it unlocked you'll be limited to 2.5G EDGE only on Tmobile, no 3G.
LordLugard said:
Sorry to bust your bubble, but the AT&T Samsung Captivate handles these 3G bands [3G UMTS/HSDPA (850/900/1900/2100 MHz)].
Notice that there is no 1700 (AWS) band, which is Tmobile's 3G band. So at most even if you successfully get it unlocked you'll be limited to 2.5G EDGE only on Tmobile, no 3G.
Click to expand...
Click to collapse
true, I have unlocked Captivate with my T-Mobile SIM from work and it shows only Edge anywhere, even next to cell tower at work where I was getting full bars 3G on MyTouch.
Is there any way around it?
So does this phone work with Tzone or Web2Go including GPS and push email? Thanks
I have my Captivate unlocked and its working on T-Mobile, except for data
Anyone know what the APN settings might be that work? The T-Mobile SIM I have in the phone has a data plan attached to it. Ive tried all the APN's I could find on the web (at least 4 variations) and none seem to give me EDGE. I know the 3G wont work, but Im just curious about getting at least the EDGE to work.
Thanks in advance!
~T.J.
EDIT: It seems one of the APNs worked for me, I just had to restart the phone after entering it.
i have an un-captivate.. everything seems to work fine but yes.. only 2g's
incredible phone.. im on wifi most of the time.
what do you mean by your data doesnt work?
hfd3189 said:
i have an un-captivate.. everything seems to work fine but yes.. only 2g's
incredible phone.. im on wifi most of the time.
what do you mean by your data doesnt work?
Click to expand...
Click to collapse
Do you have tzone and does GPS work?
hfd3189 said:
i have an un-captivate.. everything seems to work fine but yes.. only 2g's
incredible phone.. im on wifi most of the time.
what do you mean by your data doesnt work?
Click to expand...
Click to collapse
Thanks for the reply. I edited my post, it started working after I restarted the phone. Originally it was showing full service but no Edge icon, thus nothing data related was working (almost everything, haha). Voice calls in and out were fine, but nothing else. Once I restarted the phone it fired up and was on Edge just fine. I have since swapped back to my AT&T sim because Im evaluation their service in my area, but I wanted to know it would work on T-Mobile in case I cancel AT&T so I can keep the phone
~T.J.
02CWRX said:
I have my Captivate unlocked and its working on T-Mobile, except for data
Anyone know what the APN settings might be that work? The T-Mobile SIM I have in the phone has a data plan attached to it. Ive tried all the APN's I could find on the web (at least 4 variations) and none seem to give me EDGE. I know the 3G wont work, but Im just curious about getting at least the EDGE to work.
Thanks in advance!
~T.J.
EDIT: It seems one of the APNs worked for me, I just had to restart the phone after entering it.
Click to expand...
Click to collapse
Is there anyway you can post the settings?
I've try everything but can't get to work.
I also have a default data setting (T-Mobile US 310 310)
That don't work but I can create a new APN, just need to know the settings.
Seems like no data or MMS ability right now (I have the $10 plan with internet2.voicestream.com working on nokia N95 before this).
Name: T-mobile
APN: internet2.voicestream.com
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MCC:310
MNC:310 (by default and can't seem to change it to 260)
Authentication type:
APN type: internet & mms
If anyone can fill in the blanks much appreciates
got data working, now need to fix MMS
baseballfanz said:
Is there anyway you can post the settings?
I've try everything but can't get to work.
I also have a default data setting (T-Mobile US 310 310)
That don't work but I can create a new APN, just need to know the settings.
Seems like no data or MMS ability right now (I have the $10 plan with internet2.voicestream.com working on nokia N95 before this).
Name: T-mobile
APN: internet2.voicestream.com
Proxy:
Port:
Username:
Password:
Server:
MMSC:
MMS proxy:
MCC:310
MNC:310 (by default and can't seem to change it to 260)
Authentication type:
APN type: internet & mms
If anyone can fill in the blanks much appreciates
Click to expand...
Click to collapse
I found this with a quick google search.
http://modmyi.com/wiki/index.php/Carrier_APN_Settings#T-Mobile
APN: wap.voicestream.com or internet2.voicestream.com
User Name And Password: guest (for the 2nd APN only) leave in blank
NEW APN: epc.tmobile.com no username or password
hiptop.t-mobile.com
User Name: blank
Password: blank
Timeout: 15 minutes
Primary gateway IP: 216.155.165.50
Port: 8080
Secondary gateway IP: 216.155.165.50
Port: 8080
MMS Mmsc Server: http://216.155.174.84/servlets/mms
Proxy: 216.155.165.050:8080
baseballfanz said:
got data working, now need to fix MMS
Click to expand...
Click to collapse
The link I posted above your quote has a MMS/MMSC address in it.
This was all formatted for use on an iPhone so I'm not sure how the fields differ on the Captivate. But good luck to you all trying to get it working.
Thank you for your time but still a no go.
I think I'll call Tmobile
baseballfanz said:
Thank you for your time but still a no go.
I think I'll call Tmobile
Click to expand...
Click to collapse
Will you post the data settings you got working?
I don't need texting, just the data settings you said you had working before calling T-mobile.
BL4zD said:
Will you post the data settings you got working?
I don't need texting, just the data settings you said you had working before calling T-mobile.
Click to expand...
Click to collapse
This is what I have.
I created a new APN
Name: T-mobile (or anything you want)
APN: internet2.voicestream.com (could also try epc.tmobile.com)
Proxy: not set
Port: not set
Username: not set
Password: Not set
Server: not set
MMSC: http://216.155.165.50
MMS proxy: 216.155.165.50
MMS port: 8080
MCC:310
MNC: 310
Authentication type: none
APN type: internet+mms
Mine is just working with the preset epc.tmobile.com built into the phone. I have Tzones. Data+MMS appear to be working great. I'm running cognition 2.4, however it worked fine when i ran stock 2.1.
michael.seltzer said:
Mine is just working with the preset epc.tmobile.com built into the phone. I have Tzones. Data+MMS appear to be working great. I'm running cognition 2.4, however it worked fine when i ran stock 2.1.
Click to expand...
Click to collapse
Does your incoming MMS get resized?
Hi there, i've got a Captivate, you say on your post it has 900 on 3g? is that right? i need my captivate working on 900 3g too. if you know what modem - kernel is needed please reply . Thank You.
900?? I need iT!
LordLugard said:
Sorry to bust your bubble, but the AT&T Samsung Captivate handles these 3G bands [3G UMTS/HSDPA (850/900/1900/2100 MHz)].
Notice that there is no 1700 (AWS) band, which is Tmobile's 3G band. So at most even if you successfully get it unlocked you'll be limited to 2.5G EDGE only on Tmobile, no 3G.
Click to expand...
Click to collapse
Hi there, i've got a Captivate, you say on your post it has 900 on 3g? is that right? i need my captivate working on 900 3g too. if you know what modem - kernel is needed please reply . Thank You.
Hi, last night I installed that odin ICS leak, and my phone does not get data connection. I have a good amount of bars, and it says network type HSPA, but I dont get the 4g / lte icons. There is no IP address, and no data coming in at all.
I checked the APN settings, and its empty.
What APN should I add to make my data work?
Same, we may just need to try a reflash though..
geoldr said:
Hi, last night I installed that odin ICS leak, and my phone does not get data connection. I have a good amount of bars, and it says network type HSPA, but I dont get the 4g / lte icons. There is no IP address, and no data coming in at all.
I checked the APN settings, and its empty.
What APN should I add to make my data work?
Click to expand...
Click to collapse
I would use this:
http://forum.xda-developers.com/showthread.php?t=1474136
To answer my own post I found this online
Name: attwap (name it whatever you want)
APN: wap.cingular
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Seems to work.
I dont have LTE at my house, but at work tonight I get LTE so ill check if it works.
So far works great for regular HSPA though
EDIT: Posted right before that burgeswe post that link. Ill try that also.
Derp. I should have tried that in the first place.
You might just try going into the APN's screen, and hitting menu - reset to default.
Not sure about the ICS settings because I've been on call since the leak, but in theory it should work
After switching to SKYICS, my data has sucked. At first I was barely getting 90kbps on the speedtest, after a wipe and a reflash of everything, barely 1mbps. Any suggestions? I've wiped, cleared caches and reflashed the update, reflashed the modem, and no luck.
aceownstheworld said:
After switching to SKYICS, my data has sucked. At first I was barely getting 90kbps on the speedtest, after a wipe and a reflash of everything, barely 1mbps. Any suggestions? I've wiped, cleared caches and reflashed the update, reflashed the modem, and no luck.
Click to expand...
Click to collapse
Which version of SKYICS are you on? (ICS or GB?) You should check your apn settings
This procedure is taken from http://forum.xda-developers.com/showthread.php?t=1653022
.go to settings/more/mobile networks/access point names
then click bottom left haptic button and say reset to default
Att users should have ATT PTA
Now click bottom left haptic button followed by Add apn
now either copy exactly what comes up in your apn Again and hit save
or for ATT
type
Name - ATT LTE
APN - PTA
proxy - notset
port - not set
user name -not set
server - not set
MMSC - http://mmsc.mobile.att.net
mmsproxy -proxy.mobile.att.net
mms port - 80
mcc - 310
mnc - 410
Auth Type - None
Apn Type - internet +mms
Bearer - LTE(OR Unspecified if you dont live in LTE AREA)
Click bottom left haptic button and click save
and select it
Alternate ATT
me: AT&T
APN: phone (just "phone" nothing else)
Proxy: Not set
Port: Not set
User name: Not set
Password: Not set
MMSC: Not set
MMS proxy: Not set
MMS port: 80
MCC: 310
MNC: 410
Authentication type: Not set
APN type: Not set
APN protocol: IPV4
Enable/disable APN: APN enabled
Bearer: Not set
then power off phone and remove sim card
then reboot phone (no sim card)
and when up go to phone and dial *#2263#
Select Lte Settings
All bands
then bottom left haptic button / end
Open dialer again.
Dial *#2263#
select automatic
Right bottom feedback button/end
power down
now place sim back in phone
reboot
make sure apn is selected you created
Rodgers APN
APN: rogers-core-appl1.apn
Proxy:
Port:
Username:
Password:
Server:
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302 (retrieved from SIM)
MNC: 720 (retrieved from SIM).
Authentication type:
APN type:
I'm on ICS. I switched ROMS to CM9 to see if SKYICS was the problem, and same thing. The APN settings are correct. I pulled the sim, and dialed, and it said the mobile network wasn't able. Put the sim back in and dialed, and it says MMI is invalid. :/
*EDIT*
I did try the Alternate APN and its doing the same thing. What I've noticed though is it keeps switching the little network icon from an H, to 3g, to H, to nothing.
Same
OK, I was having those EXACT problems on my GB build. I did a complete tear down to stock (yech) and suddenly I could see AT&T LTE again, and it wasn't switching from H+ to nothing and Edge..
So, I got sick of stock in about three minutes and decided to try ICS for a first time. Got the UCLD2 stuff and followed instructions (I know... booooring... LOL) and it actually worked. I am now on ICS with Smooth Ice and my transfer rates in Dallas are around 30-35mb (ok by me)...
QUESTION: Where can I find the CM9 rom for this setup? I was out of the loop for about two months and everything I knew is now wrong.. LOL
Thanks!
The alpha build is over in the dev forums. I'd go with SKYICS though.
Sent from my SAMSUNG-SGH-I727 using xda premium
aceownstheworld said:
After switching to SKYICS, my data has sucked. At first I was barely getting 90kbps on the speedtest, after a wipe and a reflash of everything, barely 1mbps. Any suggestions? I've wiped, cleared caches and reflashed the update, reflashed the modem, and no luck.
Click to expand...
Click to collapse
Is this on HSPA+ or LTE? Maybe you got throttled.
I didn't get throttled. My Billing cycle had just started. It fixed itself when I went back to GB for a day. I read somewhere else to do the oneclick before flashing roms. So I did that, went back to skyics, and it worked again.
Sent from my SAMSUNG-SGH-I727 using xda premium
Is there a specific APN I need to use? I have a LTE microSIM as well, so nothing has changed aside from the ROM change.
I am unsure why I cannot connect to LTE, I know this phone was able to do it before on the stock rom...
I am currently on the Rogers network.
an_xda said:
Is there a specific APN I need to use? I have a LTE microSIM as well, so nothing has changed aside from the ROM change.
I am unsure why I cannot connect to LTE, I know this phone was able to do it before on the stock rom...
Click to expand...
Click to collapse
Make sure you are using the correct apn for the carrier you are on, and also check to see if LTE is toggled off.
bimmernut318 said:
Make sure you are using the correct apn for the carrier you are on, and also check to see if LTE is toggled off.
Click to expand...
Click to collapse
I tried searching but could not find the 'right' APN as I am unsure what is right and wrong. All I know is that I am able to get HSPA+ but no LTE... Could you please advise? Also, in the network settings it is currently GSM/HSPA/LTE (to that variant).
Currently on the Rogers network.
Checked for LTE APN and currently used this, no luck:
Name: Rogers LTE
APN: ltemobile.apn
Proxy: Not set
Port: Not set
User Name: not set
Password: Not Set
Server: Not Set
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
Authentication Type Not Set
APN Type: *
Problem resolved, I guess I just had to reset + let Rogers register my SIM or something.
Can you tell me which "baseband" you have installed? It is in the Settings, About, Software Information, More screen. I'm having the exact same issue (no LTE) on Rogers and have that exact same APN. I'm wondering if I flash a certain radio if it will fix it. It would be greatly appreciated. Thanks!
denversc said:
Can you tell me which "baseband" you have installed? It is in the Settings, About, Software Information, More screen. I'm having the exact same issue (no LTE) on Rogers and have that exact same APN. I'm wondering if I flash a certain radio if it will fix it. It would be greatly appreciated. Thanks!
Click to expand...
Click to collapse
It might just be your area in KW.
I have the latest 2.41 radio from O2 but that should not matter as I previously had 1.94 (Rogers) radio as well.
an_xda said:
It might just be your area in KW.
I have the latest 2.41 radio from O2 but that should not matter as I previously had 1.94 (Rogers) radio as well.
Click to expand...
Click to collapse
Thanks for the info. We definitely do have LTE coverage here in the KW area. I ran the RUU to test it out and I indeed got LTE coverage. So far I'm stuck on HSPA if I run any custom ROM, but it is really not all that bad. Thanks again. Some day I will figure out how to unlock LRE on my phone!
denversc said:
Thanks for the info. We definitely do have LTE coverage here in the KW area. I ran the RUU to test it out and I indeed got LTE coverage. So far I'm stuck on HSPA if I run any custom ROM, but it is really not all that bad. Thanks again. Some day I will figure out how to unlock LRE on my phone!
Click to expand...
Click to collapse
Good luck, if that did not work I would say make sure you have an LTE microSIM as my knowledge in this matter is limited.
an_xda said:
Good luck, if that did not work I would say make sure you have an LTE microSIM as my knowledge in this matter is limited.
Click to expand...
Click to collapse
Thanks for the idea. I definitely have an LTE microSIM as I get LTE if I RUU. As soon as I unlock the bootloader and load a custom ROM I can't get past HSPA.
denversc said:
Thanks for the idea. I definitely have an LTE microSIM as I get LTE if I RUU. As soon as I unlock the bootloader and load a custom ROM I can't get past HSPA.
Click to expand...
Click to collapse
Update: I installed CM10 last week and got LTE. It has worked perfectly since then. I'm now running Calkulins 1.0b ROM and am still getting lte. I can't explain it, but it is fixed!
noob
any one help?? please.. i took my phone to someone who rooted my phone and updated to the lates 4.0.4 im on Rogers wirless and filled the APN settings and im only getting H or 3G and not getting LTE anymore.. can anyone help?? im running clean rom
You need to get the rogers APN for lte and put it in on your settings. I'm on fido and sometimes it takes a few minutes for it to connect to LTE. Here's the settings you can try
APN - ltemobile.apn
Proxy - <not set>
Port - <not set>
Username- <Not set>
Passwors - <not set>
Server < not set>
MMSC - http://mms.gprs.rogers.com
MMS - proxy 10.128.1.69
MMS - Port 80
MMS protocol - Wap 2.0
MCC - 302
MNC - 720
Aythentication type - < not set>
APN type - either "*" or "internet + mms" Should work
Sent from my One X using xda app-developers app
If the above doesn't work try this:
Go into system tuner or ROM manager, backup then edit this build.prop:
ro.telephony.default_network
Change the number to 10 or 11 (that's what worked for me)
Save it and reboot.
Let me know if this works. I'm trying to get some momentum going on this as it seems to be a common problem in my area
I recently got the XT925 fido version and I am using it on AT&T, everything is working beautifully, hsdpa, LTE works perfect as well. The only issue I'm having is that mms messages or picture messages come in where it asks me to download, I tap download but it does not download the image, it just sits there. One issue is that everyone who is sending to me is sending from an iPhone so that may have something to do with it. If anyone knows a way to get around this issue with mms I'd appreciate the help, thank you.
sleepyal said:
I recently got the XT925 fido version and I am using it on AT&T, everything is working beautifully, hsdpa, LTE works perfect as well. The only issue I'm having is that mms messages or picture messages come in where it asks me to download, I tap download but it does not download the image, it just sits there. One issue is that everyone who is sending to me is sending from an iPhone so that may have something to do with it. If anyone knows a way to get around this issue with mms I'd appreciate the help, thank you.
Click to expand...
Click to collapse
Check your APN. Are you using something that is automatically selected by the phone or did you enter one in manually?
TRF-Inferno said:
Check your APN. Are you using something that is automatically selected by the phone or did you enter one in manually?
Click to expand...
Click to collapse
I am using something that was in the phone automatically the at&t hsdpa apn , i donno what the settings in there are for mms.
sleepyal said:
I am using something that was in the phone automatically the at&t hsdpa apn , i donno what the settings in there are for mms.
Click to expand...
Click to collapse
Create another APN and use this:
Name: ATT PTA
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth: none
APN type: default,mms,supl,hipri
Click to expand...
Click to collapse
Don't forget to make sure you select it after saving it, because the OS will not do that automatically. Reboot the phone, go back to the APN list and make sure it's still there and selected. Try sending or receiving MMS to it. The automatically selected entry is an older APN and this new one might actually give you a small LTE speed boost. Give it a shot with SpeedTest.
TRF-Inferno said:
Create another APN and use this:
Don't forget to make sure you select it after saving it, because the OS will not do that automatically. Reboot the phone, go back to the APN list and make sure it's still there and selected. Try sending or receiving MMS to it. The automatically selected entry is an older APN and this new one might actually give you a small LTE speed boost. Give it a shot with SpeedTest.
Click to expand...
Click to collapse
pta does not seem to be working on my phone. the hsdpa apn is working and i get lte from it. mms does not work with the hsdpa the settings you provided i actually attempted to create new apn with them but i don't get data connectivity with the pta apn, i don't know what the problem is, i'm wondering if it has something to do with the way att has my account setup since i'm coming from an iphone 5 and i never notified them that i got a new phone. Could this be possible?
just to let everyone here know, I am coming for an at&t iphone 5 lte, and i bought a fido xt925 from ebay. by default when i go into the apn settings there are 5 apns available, out of those 5, 2 of them are pta and hsdpa, I am not able to use the pta at all, it will not get data connectivity at all for me. Also lets take into account that i am using my sim card from my iphone 5 which is a nano sim so i am using an adapter to size that sim to a micro sim to get it into the razr hd. the only apn with which i get data is the hsdpa apn, when using that apn i am able to get hspa+ and LTE because i see the symbol changes from H+ to 4G and i have tested and I do get lte speeds. The mms problem i noticed is only when i am using LTE, when i am using the hspa+ i am able to send and receive mms messages. basically when the phone has H+ i can get and send mms but when the phone goes to 4G I am not able to send or receive mms. Very strange I will be contacting at&t about this.
sleepyal said:
just to let everyone here know, I am coming for an at&t iphone 5 lte, and i bought a fido xt925 from ebay. by default when i go into the apn settings there are 5 apns available, out of those 5, 2 of them are pta and hsdpa, I am not able to use the pta at all, it will not get data connectivity at all for me. Also lets take into account that i am using my sim card from my iphone 5 which is a nano sim so i am using an adapter to size that sim to a micro sim to get it into the razr hd. the only apn with which i get data is the hsdpa apn, when using that apn i am able to get hspa+ and LTE because i see the symbol changes from H+ to 4G and i have tested and I do get lte speeds. The mms problem i noticed is only when i am using LTE, when i am using the hspa+ i am able to send and receive mms messages. basically when the phone has H+ i can get and send mms but when the phone goes to 4G I am not able to send or receive mms. Very strange I will be contacting at&t about this.
Click to expand...
Click to collapse
I'm sorry to hear you're still having issues with MMS. I just did a firmware restore on my phone and was able to select PTA and use MMS in WiFi, H+ and LTE. I'm not sure how much of an assistance AT&T will be willing to offer though, since you are using a phone that is not normally provisioned by them. I've ran into cases where they just shrugged and told me it's not their problem when I had data issues with the International Note.