Database Info

Just got a Droid 2 Global, unlocked, can't update, custom ROM help would be aprciatd.

Hello all
I purchased a Droid 2 Gloabal unlocked on eBay, got it today, thankfully everything works (well atleast for now).
Currently it's running 2.2 Froyo.
I was prompted to download the OTA software (GB), and I did. The phone then asked me to reboot, and install it, I hit okay.
The next thing is the update progress bar, all goes well, and then all of the sudden, I get a little exclamation mark on the screen, and it reboots.
Now, for some reason I have CW Recovery Mod alway running at startup, never encountered this before om another phone (non Droid, this is my first 'verizon' droid).
Oh, I live in Canada and use Virgin mobile.
Anyway, I select "reboot phone", and then it goes back into 2.2 Froyo, tells me that "Update failed".
I was looking at different roms, just can't figure out which one is the best for my setup - Canada.
The phone looks like it's rooted, I also have the Droid 2 Bootstrapper on it, however the tool gives me an error no matter what button I press in it.
Can someone point me in the right direction please
I am somewhat of a noob.
Also, does nandroid backup the whole system, kernel and all, if things go belly up, will it always fix my issue?
Thanks!
----------------EDIT----------------
So, I found out that the phone is actually not rooted, so I rooted it, using Z4root.
Now, I am at a loss. The phone that I flashed before was quite straightforward to do, this one is stragne.
As mentioned above, I can't upgrade to 2.3 since the phone is rooted (also, I renamed blurupdater.apk so now I don't get the pesky warning message to update).
What do I do to go to 2.3.x?
Since, from what I read on the forums, you can't go 2.2 -> custom rom 2.3, you have to go 2.2 -> 2.3 official rom -> 2.3 custom rom?
Any ideas?

Gingerbread Full SBF 4.5.608
http://forum.xda-developers.com/showthread.php?goto=newpost&t=1437177

Thanks for that link.
So, I can flash that over my current install of Foryo + root + Clockwork?
Also, what about the unlocked status of the phone?
I have no idea how it is unlocked (perhapps a rom that does not honor provider locks?), is there any way I can tell if the phone has been truly unlocked?
If I go to the menu to enter the unlock code (I forget what menu it is, but you get to it by dialing some number), the "Enter unlock code" still pops up?
What could this mean?
I don't want to brick my phone xD
Thanks again!

vlambrecht said:
Thanks for that link.
So, I can flash that over my current install of Foryo + root + Clockwork?
Also, what about the unlocked status of the phone?
I have no idea how it is unlocked (perhapps a rom that does not honor provider locks?), is there any way I can tell if the phone has been truly unlocked?
If I go to the menu to enter the unlock code (I forget what menu it is, but you get to it by dialing some number), the "Enter unlock code" still pops up?
What could this mean?
I don't want to brick my phone xD
Thanks again!
Click to expand...
Click to collapse
Yes you can flash it with what ever you have or don't have
You will have to reroot after with petes root tools
Once unlocked the phone is always unlocked can't be locked again
Sbfs and roms don't touch that part of phone
Sent from my DROID2 GLOBAL using xda premium

Thanks, and lastly, about Clockwork Recovery, will it need to be reinstalled as well?

Consider reading this: http://droid.koumakan.jp/wiki/SBF
The intro part should probably provide the answer to your question.

vlambrecht said:
Thanks, and lastly, about Clockwork Recovery, will it need to be reinstalled as well?
Click to expand...
Click to collapse
As I'm sure it was covered in the link from the post above mine, I'll just say this to make sure.
Yes, you will need to reroot and then flash CWM.

Hello again all!
Finally got the time to try to SBF the D2G to Gingerbread.
One question still lingers in my mind.
The phone was sold to me as unlocked, and for all intents and purposes, it is. I use my Virgin mobile SIM, and it works.
However, here is my concern. Is there only 1 way to unlock the phone? A code unlock?
Why I am wondering, it's because if you enter "#073887*" the code entry dialog still appears. Is that supposed to happen?
My fear is, that once I SBF from Froyo to GB, my phone will be locked (unless it was really code unlocked).
So, my question is twofold:
a) would entering "#073887*" ALWAYS show the code entry dialog, even if the phone has been unlocked?
b) Is there a way to determine if the phone has been code-unlocked, v.s. some sort of custom/moded rom that does not honour the provider lock?
Thanks!

Yes, the code input dialogue is displayed no matter what state the phone is in in terms of SIM lock.
There is no ROM or software tool that can avoid the SIM lock on a DROID2 GLOBAL device.
If the phone is unlocked, it stays that way. With a locked phone, all you can do to use it on GSM (besides unlocking normally) is use a TurboSIM. If you can use non-VZW/VodafoneNL SIM cards, your phone is unlocked.
You cannot enter unlock codes while on custom firmware; only stock ROM supports unlocking.
Flashing does not reset the SIM lock status. An unlocked phone stays unlocked even after flashing an SBF image.

you should add that to your wiki, good info

Thanks, that's great info!
I will SBF the phone later and let you guys know

[Q] CM9! > VKL1! > IMEI found! > Unlock?????

Hi. I had an Evo 4G and CM9 mastered. My first mistake was getting an iPhone.
I now have an i717. It was rooted but I didnt recognize it so I immediately put in clockwork and CM9. I lost imei but it reappeared after putting in the radio vkl1 a second time.
I have some db's in the signal meter in settings so its getting something. The number isnt showing from the tmo sim though. The phone was never unlocked.
I do not get a prompt to unlock when I reboot. Did I need to unlock first? I thnk I know the answer.
What should I do? I can pay $10 or whatever but I shouldnt have to. Im not sure if I need to use this odin thing to get to a stock ATT rom or something before I can unlock? Please help. thanks in advance.

I say u should go to odin and unroot then reroot it just to be on the safe side. Then u could unlock it if u want but unrooting it should work. It always works for me
Sent from my SAMSUNG-SGH-I727 using XDA

neko_tensai said:
Hi. I had an Evo 4G and CM9 mastered. My first mistake was getting an iPhone.
I now have an i717. It was rooted but I didnt recognize it so I immediately put in clockwork and CM9. I lost imei but it reappeared after putting in the radio vkl1 a second time.
I have some db's in the signal meter in settings so its getting something. The number isnt showing from the tmo sim though. The phone was never unlocked.
I do not get a prompt to unlock when I reboot. Did I need to unlock first? I thnk I know the answer.
What should I do? I can pay $10 or whatever but I shouldnt have to. Im not sure if I need to use this odin thing to get to a stock ATT rom or something before I can unlock? Please help. thanks in advance.
Click to expand...
Click to collapse
The i717 is the Galaxy Note, not the Skyrocket. Did you put a Skyrocket rom on the Note or was that just a typo?

.........
At this point I have paid cellunlock dot net to give me an unlock code.
Probably a common problem was that my USB cable was not in good status, using a usb extension, so I had failed flashing of firmware til late last night.
This morning I was able to install a stock ATT firmware. Now I receive a prompt for the unlock code. I cannot put CM9 back on it or do anything with it until I unlock it, so I am waiting.
**devpro**. you said no need to unlock? Im not sure. It certainly didnt ask for an unlock code when I was on cm9, but I could not make calls.
Could anyone clarify? Do I need to unlock if I am rooted, using tmo on att note?
I dont care much for odin or that kies crap. I prefer reboot to recovery, clockwork, rom manager and put cm9 on it. In critical situations its a life saver.
So im waiting on the unlock code or to find out i dont need it but i bet I do, especially since i travel overseas a lot.
???

If you're on T-Mobile, and using an AT&T phone you will need to unlock it.

neko_tensai said:
This morning I was able to install a stock ATT firmware. Now I receive a prompt for the unlock code. I cannot put CM9 back on it or do anything with it until I unlock it, so I am waiting.
Click to expand...
Click to collapse
I am doing the same thing with my Skyrocket. I got impatient waiting for the unlock code and rooted it, flashed CWM, custom radio, and CM9 on it. Then realized that after putting in non-AT&T SIM I wasn't getting unlock prompt. Keypad codes to bring up prompt don't work either. Hoping return to stock fixes it and I can just restore the CM9 from backup.
neko_tensai said:
**devpro**. you said no need to unlock? Im not sure. It certainly didnt ask for an unlock code when I was on cm9, but I could not make calls.
Click to expand...
Click to collapse
You absolutely have to unlock whether you're prompted or not. Rooting and installing non-stock software on it appears to result in lack of access to the unlock prompt (guessing UCLE2 radio but it may have just been CM9 in general).
I'll let you all know how it goes.

Success
Returned to stock using k0nane's method and Odin here: http://forum.xda-developers.com/showthread.php?t=1342348, shut down, removed battery, inserted non-AT&T ROM, booted up, and was prompted for the unlock code.
Note: Those that are planning on using k0nane's method above should use the file he links to (SGH-I727-UCKJ2-k0nane.tar), another archive I grabbed via a different thread boot-looped my phone and I ended up having to do some extra work.

[Q] question about firmware,root and unlock device

hi
JUst want to understand, when you root a phone ,do i need the carrier firmware (i think you call it roms)
Cause my phone was under telus and i just did the unlock by a web site and they me send a code...
My phone is under vigin now (unlock)
What do i need to root it , the stock firmware ,or the one from bell(since it the same as virgin)
I saw that link for the carrier firmware http://forum.xda-developers.com/showthread.php?t=1739426
after i root it, can i flash it to jelly bean
Thanks

nobody?

Your question is very confusing because of the English you use and mixed up terminologies, plus you don't even say what kind of phone it is. To root it, you'll need ADB or Odin. When you root, you will load new software on the phone, typically a ROM.
A Telus ROM is basically the same as ATT, GSM. You should start there and search for the right APN for your carrier.
Get CM10 for ATT. Then look up the virgin APN info. There are app store apps to fix/set APN info.
YouTube has video to show you how. Google for your answers.
Sent from my SAMSUNG-SGH-I747 using xda premium

sorry im french
but if im unlock why do i have to use a rom from virgin

Unlock and root are 2 different things. Unlock (or SIM unlock) means you can use your phone with any carrier. Root means you have access to all files on your phone (this is like being "administrator" in a Windows computer, as opposed to being a "limited user" or "standard user"). To use the iPhone analogy, rooting your
Android phone is like jailbreaking your iPhone.
So, what do you really want to do with your device? I'm guessing you want to put JellyBean on it. If that's true, you must:
Root your device
Install a custom recovery
Download a custom ROM which was designed to run on your device
Use the custom recovery to install the ROM onto your phone

thanks
But if i dont want that triangle ,i gonna use that method http://forum.xda-developers.com/showthread.php?t=1739426
And my phone was under telus and i have unlock it to use it under virgin.
I gess i have the rom from telus!!??
So i root it with the rom from telus or bell(virgin)????
And after that i can put jelly bean without tripping the counter.
Thanks

OP, not sure what you are trying to accomplish by your title in your post, but seem you have the answer/method you are looking for..
Thank You & Thread Closed

[Q] Band Unlock for D2G

Hello.I'm sure this has been posted a 1000 times because I've seen tons of threads on it in my searches...
I've got a Droid 2 A956 that I need to use with At&t.I've already got the SIM unlock code,just need some guidance
unlocking the radio for use with GSM carriers in America.
The phone is running Android version 2.3.4.
I'm confused because the tutorial on Rootwiki talks about bricking the phone but does not explain how.
If someone could please post the most up to date and full tutorial,I would greatly appreciate that.Thanks.

Quoting http://rootzwiki.com/topic/25828-in...-and-band-unlock-droid-2-global-with-629-rom/
1. Flash 608 SBF using RSDLite (VRZ_A956_4.5.608_1FF_01.sbf) (press up arrow on keyboard while power up to enter flash mode)
Click to expand...
Click to collapse
This bricks the phone.
Some other steps also brick it.

PassingThruLife said:
I'm confused because the tutorial on Rootwiki talks about bricking the phone but does not explain how.
Click to expand...
Click to collapse
It just means that some of the steps in the band-unlocking procedure will temporarily brick the phone. If you follow all the steps, in the order listed, you should end up with a rooted, band-unlocked, fully functional phone.
Note: If I were you, I'd apply the SIM unlock code first and make sure it works (can read your AT&T SIM, even though it won't connect to the network) before I put in the time and effort to modify the radio baseband.

jabberwockish said:
It just means that some of the steps in the band-unlocking procedure will temporarily brick the phone. If you follow all the steps, in the order listed, you should end up with a rooted, band-unlocked, fully functional phone.
Note: If I were you, I'd apply the SIM unlock code first and make sure it works (can read your AT&T SIM, even though it won't connect to the network) before I put in the time and effort to modify the radio baseband.
Click to expand...
Click to collapse
how do i do this exactly,no screen pops up when i stick my att sim card in?
I tried the" Enter 74663# [Menu] [Menu] " , nothing happens.
Thanks for the help,much appreciated,.

Try switching the device to GSM mode.
If the Network Unlock PIN dialog doesn't show up, your device might be already unlocked.

New S5 user looking for root support

Hello all I recently got a sprint S5 activated on boost mobile and so far I am really enjoying it and I was wondering what it takes to unlock this device for root capabilities. Such as how to unlock the bootloader and S-Off and how to install TWRP.

Go here:
http://forum.xda-developers.com/showthread.php?t=2737724

wc4r said:
Go here:
http://forum.xda-developers.com/showthread.php?t=2737724
Click to expand...
Click to collapse
Sweet thanks for the link now is there an RUU method or in other words, returning the phone to complete factory stock?

Familiarize yourself with Odin. It's a PC program used to flash things like the stock tar file, which is similar to HTC's ruu.

metalfan78 said:
Familiarize yourself with Odin. It's a PC program used to flash things like the stock tar file, which is similar to HTC's ruu.
Click to expand...
Click to collapse
Alright thanks you I should have enough information now to root my phone and restore it back in case I want to restore it back to normal. Now does the bootloader need to be unlocked and do Galaxys have the S-Off option. (I came from an HTC phone which is why I am using HTC terms lol. This is also my first Galaxy Phone)

I've had HTC phones before as well, so I totally understand. There is no s-off needed. The only locked bootloaders are on Verizon and AT&T. The only concern on samsung phones is tripping the Knox counter, which only affects warranty claims (and not always).

metalfan78 said:
I've had HTC phones before as well, so I totally understand. There is no s-off needed. The only locked bootloaders are on Verizon and AT&T. The only concern on samsung phones is tripping the Knox counter, which only affects warranty claims (and not always).
Click to expand...
Click to collapse
Oh alright thank you i just wish every android phone had the same way of rooting so i don't have to learn new terms and install new drivers lol. Well ok time to go root and install cyanogenmod on this phone ?