Database Info

problems with flashing PG58IMG.zip

I just used htcdev.com to get s-off on my HTC Sensation then if i try to flash PG58IMG.zip I get "Model ID incorrect"

You weren't supposed to unlock that way u should have used revolutionary
Anyways u did go into bootloader to do this right?
Sent from my HTC Sensation Z710e using XDA Premium App

I'm having the same problem here. Model ID is incorrect error. I used HTCdev as well to unlock. But mine also still says S-on.
Sent from my HTC Sensation 4G using xda premium

If I'm correct htcdev won't actually give you full s-off. It's only a partial unlock. If possible try to unlock with revolutionary. I don't see why people use the htcdev when we've already done it.

What PG58IMG are you flashing? Full ROM or something else? More information required!!

use revolutionary to get s-off then flash PG58IMG in hboot

EddyOS said:
What PG58IMG are you flashing? Full ROM or something else? More information required!!
Click to expand...
Click to collapse
I used this PG58IMG provided here http://forum.xda-developers.com/showthread.php?t=1192300
Now when i try to use the revolutionary S-off method it says wrong device with my drivers and such. I'm lost.

Shall we try.... if you install the latest stock ruu and then try to use revolutionary, that might help as you'd flash the hboot which is in the ruu, thus revert back to the original condition of the phone for which the revolutionary tool is designed.
Give it a shot and post back
and install the relevant ruu for your device (unbranded/branded) and if it doesn't work try to flash it trough fastboot

freakzone said:
Shall we try.... if you install the latest stock ruu and then try to use revolutionary, that might help as you'd flash the hboot which is in the ruu, thus revert back to the original condition of the phone for which the revolutionary tool is designed.
Give it a shot and post back
and install the relevant ruu for your device (unbranded/branded) and if it doesn't work try to flash it trough fastboot
Click to expand...
Click to collapse
Tried doing SUPERCID. And i get his error and will not change my CID:
C:\adb>fastboot oem writecid 11111111
... INFOvreg_set: request is duplicated id 14
INFO pyramid_init_sd, SD card power on ok
INFOsdcc_init_memory_device done
INFO[FAT_ERROR] fat_open_file: can not find SMART_IO.CRD
INFO[JAVACARD_ERR] SMART_IO.CRD cann't find
OKAY [ 1.094s]
finished. total time: 1.094s

Put the zip on ur sd card -go into fastboot... wanna update-yes. U want to update ur radio... right ?

chiligamba said:
Put the zip on ur sd card -go into fastboot... wanna update-yes. U want to update ur radio... right ?
Click to expand...
Click to collapse
Yup. Done that but it gives me a Model ID incorrect error once i try to update it.

Same problem with HTC S-off.

illuminarias said:
If I'm correct htcdev won't actually give you full s-off. It's only a partial unlock. If possible try to unlock with revolutionary. I don't see why people use the htcdev when we've already done it.
Click to expand...
Click to collapse
Perhaps because we don't want to send phone identifier information to revolutionary to get a beta key.

S-off after htcdev-bootloader-unlock?

First of all: I tried to find some useful info on the web to solve the problem... But if u guys got some useful links -» give it to me
Okay. My Ds is on hboot 2... Bootloader is unlocked with htcdev... And s-on...
I am sick of always flashing boot.IMG after flashing a Rom with 4ext... So my question is: is there a way to get s-off to "easily" install Roms without downgrading hboot..?
Sent from my HTC Desire S using XDA

Check this out:
forum.xda-developers.com/newreply.php?do=newreply&p=23771478

Saipro said:
Check this out:
forum.xda-developers.com/newreply.php?do=newreply&p=23771478
Click to expand...
Click to collapse
doesn't really help me, sry...

@rizmdee
Your only option is to downgrade to a older hboot, here a two threads
http://forum.xda-developers.com/showthread.php?t=1399331
http://forum.xda-developers.com/showthread.php?t=1443636
Once downgraded you can s-off with revolutionary, have a look here in section 1.

foX2delta said:
@rizmdee
Your only option is to downgrade to a older hboot, here a two threads
http://forum.xda-developers.com/showthread.php?t=1399331
http://forum.xda-developers.com/showthread.php?t=1443636
Once downgraded you can s-off with revolutionary, have a look here in section 1.
Click to expand...
Click to collapse
how to >without< unlocking with htc dev.... my device is allready unlocked, so i don't really think it will work...?

It will work too. You've got same hboot 2.xxx and are ever s-on with the same firmware . Don't forget to relock your bootloader using fastboot before flashing RUU.
fastboot oem lock
The only difference is that HTC now know you've unlocked your bootloader and can void your warranty if something goes wrong.
Sent from my Desire S using xda

@rizmdee
Just do it already and stop shooting things down. I understand that you are already unlocked, but if you took the time you would see that people that have unlocked have used it, you will only need to "fastboot oem lock" to install the RUU, READ and it will all be clear.
Also if you want to get into the details, then yeah if you are unlocked and have rooted or have a rooted rom, I assume you are, then just jump to changing your misc version cause you already have root #, no need for temp root, but for you I suggest you just follow it cause you will confuse yourself, .
Also just make a goldcard for the hell of it, casue I am unsure if you have a unbraded phone.

@foX2delta:
I tried it before I unlocked with htc-dev and it didn't work... so I#m not really sure
and does it work, if I got allrdy flashed custom rom (primo-s 1.3)? And if not: can i re-unlock with "fastboot oem unlock" ?
EDIT: my device ain't branded... deviceinfo-app says htc-europe...
Thanks a lot pplz... ill try and post again...

foX2delta said:
@rizmdee
Just do it already and stop shooting things down. I understand that you are already unlocked, but if you took the time you would see that people that have unlocked have used it, you will only need to "fastboot oem lock" to install the RUU, READ and it will all be clear.
Also if you want to get into the details, then yeah if you are unlocked and have rooted or have a rooted rom, I assume you are, then just jump to changing your misc version cause you already have root #, no need for temp root, but for you I suggest you just follow it cause you will confuse yourself, .
Also just make a goldcard for the hell of it, casue I am unsure if you have a unbraded phone.
Click to expand...
Click to collapse
misc_version worked...
oem lock worked...
BUT: now im in my bootloader and can't "oem unlock" -> command error!
*** RELOCKED ***
*** SECURITY WARNING ***
my device doesn't boot... PLZ HELP

@rizmdee
Run the 0.98 RUU now.

0.98 ruu? not 1.28 or 1.47?
EDIT: ah sry... doesnt work... error 131

@rizmdee
Yes 1.28 or 1.47
Yip, I told you, MAKE goldcard, remember?
Run the fastboot command "fastboot getvar all" remove yout imei from your post.
You will now have to make a coldcard on your PC (not sure if you can use another phone)
Check here, kashoulis post 11 and you can also check here

but the device is not branded... crappy...
ok ill take a look...
what does getvar all do?
crap: -> cidnum: O2___102

so i cant unlock my bootloader again?

@rizmdee
Yip, see the CID O2__102, means your phone is O2 branded.
I think, not sure though, you can try this RUU. I think, judging by its size/data its a 0.98 hboot (O2_UK_1.31.206.1), but I am pretty sure.
SO give that one a try, if that fails you WILL have to make a goldcard.

foX2delta said:
@rizmdee
Yip, see the CID O2__102, means your phone is O2 branded.
I think, not sure though, you can try this RUU. I think, judging by its size/data its a 0.98 hboot (O2_UK_1.31.206.1), but I am pretty sure.
SO give that one a try, if that fails you WILL have to make a goldcard.
Click to expand...
Click to collapse
Okay i used to "fastboot flash unlocktoken Unlock_code.bin again and now my device is *** UNLOCKED *** again... holy crap i thought i won't get it !
okay... the next time ill try it -> GOLDCARD FIRST!!! thanks a lot foX2delta...
it's just like: holy crap I wanna be s-off xD

I am still sure the above mentioned RUU will downgrade you.

first i need to calm down, my friend
but I still want an s-off-device so I'll try it out next time and post the results

I tried the RUU mentioned above several months ago, and it indeed works for O2-branded DS, which the OP obviously has.

Jack_R1 said:
I tried the RUU mentioned above several months ago, and it indeed works for O2-branded DS, which the OP obviously has.
Click to expand...
Click to collapse
so now u got s-off with that ruu?

Need help finding my RUU

baseband: 0.17.31501S.10_2_10.27.31501S.10L
CID: HTC_K18
Image Version: 1.84.461.11
I can't find my ruu and i was searching here:
http://forum.xda-developers.com/showthread.php?t=1543588 (i have the s4 version)
the closest one found was with my baseband version but had a different image version.

Try this one
http://www.filefactory.com/file/zfv..._2_10.27.31501S.10L_release_265369_signed.exe
Sent from my HTC One S using xda app-developers app

mirror
blackcell1 said:
Try this one
http://www.filefactory.com/file/zfv..._2_10.27.31501S.10L_release_265369_signed.exe
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
thats the one i was talking about but as you can see the image version is different from mine
i have 1.84.461.11 and the download have 1.84.666.9.
my question is if it will be compatible?

Hi you, why you not change CID to supper CID 1111111?, you can flash any RUU file if you want.

thanhthao2002 said:
Hi you, why you not change CID to supper CID 1111111?, you can flash any RUU file if you want.
Click to expand...
Click to collapse
cause someone told me that i need to have s-off to supercid and i can't s-off one s.
i don't know if i need s-off or just unlocked bootloader?

LSGio said:
cause someone told me that i need to have s-off to supercid and i can't s-off one s.
i don't know if i need s-off or just unlocked bootloader?
Click to expand...
Click to collapse
You need S-OFF if you have an S3. If you have an S4, just an unlocked bootloader is fine.
Sent from my HTC One S using Tapatalk 2

usaff22 said:
You need S-OFF if you have an S3. If you have an S4, just an unlocked bootloader is fine.
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
i have s4 but can you please give me a link on how to supercid?
thank you!

LSGio said:
i have s4 but can you please give me a link on how to supercid?
thank you!
Click to expand...
Click to collapse
Reboot phone into fastboot mode, open cmd window on your computer linking to the adb path.
fastboot oem writecid 11111111. Being SuperCID you can flash whatever RUU, but not receive OTA updates.
Sent from my HTC One S using Tapatalk 2

usaff22 said:
Reboot phone into fastboot mode, open cmd window on your computer linking to the adb path.
fastboot oem writecid 11111111. Being SuperCID you can flash whatever RUU, but not receive OTA updates.
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
first i have to say that i have a S4 version that i checked with cpu spy and you told me that i only need unlocked bootloader so its unlocked and when i try to supercid it says: FAILED (status read failed (Too many links)) and then i get stuck in bootloader mode and i have to get it out of bootloader mode manually (command fastboot reboot-bootloader didn't help cause i got a respond of waiting for device)
and then when i boot again into fastboot usb and type fastboot getvar cid it says HTC__K18 like the old one.
what do i have to do?
is there any way to s-off htc one s?

LSGio said:
first i have to say that i have a S4 version that i checked with cpu spy and you told me that i only need unlocked bootloader so its unlocked and when i try to supercid it says: FAILED (status read failed (Too many links)) and then i get stuck in bootloader mode and i have to get it out of bootloader mode manually (command fastboot reboot-bootloader didn't help cause i got a respond of waiting for device)
and then when i boot again into fastboot usb and type fastboot getvar cid it says HTC__K18 like the old one.
what do i have to do?
is there any way to s-off htc one s?
Click to expand...
Click to collapse
There is a link to Super CID instructions in the dev forum at http://forum.xda-developers.com/showthread.php?t=1671643
Also, there is no s-off yet for HTC One S.
Third, what carrier do you have? I did not recognize your CID. If there is a RUU that you think exists that Football has not posted in his thread, than I suggest PM ing him. Thats how I was able to get the three Bell Mobility RUUs onto FileFactory. But I am curious about your carrier as it may already be in his list.
Cheers,
AKToronto

AKToronto said:
There is a link to Super CID instructions in the dev forum at http://forum.xda-developers.com/showthread.php?t=1671643
Also, there is no s-off yet for HTC One S.
Third, what carrier do you have? I did not recognize your CID. If there is a RUU that you think exists that Football has not posted in his thread, than I suggest PM ing him. Thats how I was able to get the three Bell Mobility RUUs onto FileFactory. But I am curious about your carrier as it may already be in his list.
Cheers,
AKToronto
Click to expand...
Click to collapse
My carrier is cellcom, israel.

[Q] Phone stuck in a boot loop, plus other problems

My phone, HTC Sensation XE, is S-ON, on default ROM, and has HBOOT 1.29.000. Needless to say, my phone is not rooted.
The phone is on a boot loop ever since I last took off the battery and placed it back. I sometimes get a message that my Android system is getting upgraded, terminating with an error "System UI has stopped working" before the phone restarts itself again.
I don't know if this is a hardware issue or software.
How do I get my phone to a normal state? I don't mind rooting the phone if I need to for the purpose of installing default/custom ROM. But I don't know if this would be possible because I only have access to boot screen at present.
Please suggest me suitable solutions. Thank you

jiteshgawali said:
My phone, HTC Sensation XE, is S-ON, on default ROM, and has HBOOT 1.29.000. Needless to say, my phone is not rooted.
The phone is on a boot loop ever since I last took off the battery and placed it back. I sometimes get a message that my Android system is getting upgraded, terminating with an error "System UI has stopped working" before the phone restarts itself again.
I don't know if this is a hardware issue or software.
How do I get my phone to a normal state? I don't mind rooting the phone if I need to for the purpose of installing default/custom ROM. But I don't know if this would be possible because I only have access to boot screen at present.
Please suggest me suitable solutions. Thank you
Click to expand...
Click to collapse
if you are completely stock then i think you only option is to use a ruu.exe
http://forum.xda-developers.com/showthread.php?t=1672425
find the one which corresponds with your region and cid

rzr86 said:
if you are completely stock then i think you only option is to use a ruu.exe
http://forum.xda-developers.com/showthread.php?t=1672425
find the one which corresponds with your region and cid
Click to expand...
Click to collapse
Thanks rzr86
I looked into the thread you suggested. For my region and CID, I was not able to get the RUU from the thread. What I could get was this - an OTA zip file that matches my software version exactly (3.33.720.106) from this thread: http://forum.xda-developers.com/showthread.php?t=1764025
How do I proceed further with this zip file, since I don't have an executable RUU file?
I am hoping you can be of help -)
(The zip file contains -- META-INF, patch, system, firmware.zip, fotaBoot, version.txt)

Get s off
Install custom recovery(4ext)
and flash any ics / jelly bean custom Rom

Itsakash said:
Get s off
Install custom recovery(4ext)
and flash any ics / jelly bean custom Rom
Click to expand...
Click to collapse
I was of the same opinion itsakash, but I am not sure if I can SOFF from the bootloader screen because I have only that option available with me. Can you please refer to me a good guide on this forum where I can SOFF from bootloader?

jiteshgawali said:
I was of the same opinion itsakash, but I am not sure if I can SOFF from the bootloader screen because I have only that option available with me. Can you please refer to me a good guide on this forum where I can SOFF from bootloader?
Click to expand...
Click to collapse
Yes u can s off from bootloader
Use KGS utility or ganeshp one click root. ,s off method Check general section in sensation forum
Connect mobile to pc on bootloader screen( mobile should say fastboot USB )
And follow instruction carefully
:thumbup:

Itsakash said:
Yes u can s off from bootloader
Use KGS utility or ganeshp one click root. ,s off method Check general section in sensation forum
Connect mobile to pc on bootloader screen( mobile should say fastboot USB )
And follow instruction carefully
:thumbup:
Click to expand...
Click to collapse
When I try and do SOFF using KGS utility, it restarts my phone because my phone is not HTC dev unlocked. (My phone's motherboard was replaced some time ago, and so I cannot unlock my phone.)
ganeshp's one click root requires SOFF. I can't SOFF using his technique because temp_root.bat doesn't work in bootloader screen.
I am in trouble, and don't look like getting out of it

jiteshgawali said:
When I try and do SOFF using KGS utility, it restarts my phone because my phone is not HTC dev unlocked. (My phone's motherboard was replaced some time ago, and so I cannot unlock my phone.)
ganeshp's one click root requires SOFF. I can't SOFF using his technique because temp_root.bat doesn't work in bootloader screen.
I am in trouble, and don't look like getting out of it
Click to expand...
Click to collapse
@ganeshp's one click root doesn't require htc dev unlock (meaning no prequisite permanent root; the guide has steps for temproot).
You just need one boot.
Do this: get the boot.img of your current (stock rom) and type fastboot boot boot.img.

jiteshgawali said:
My phone, HTC Sensation XE, is S-ON, on default ROM, and has HBOOT 1.29.000. Needless to say, my phone is not rooted.
The phone is on a boot loop ever since I last took off the battery and placed it back. I sometimes get a message that my Android system is getting upgraded, terminating with an error "System UI has stopped working" before the phone restarts itself again.
I don't know if this is a hardware issue or software.
How do I get my phone to a normal state? I don't mind rooting the phone if I need to for the purpose of installing default/custom ROM. But I don't know if this would be possible because I only have access to boot screen at present.
Please suggest me suitable solutions. Thank you
Click to expand...
Click to collapse
I know its a long shot, but you should try doing a factory-reset from the bootloader, just in case it works.
Otherwise run an RUU from the bootloader.

firstly Itsakash he can't S-OFF because the device must be booted to the OS
secondly Far_SighT the command is fastboot flash boot boot.img
thirdly as raz0rf1sh suggested factory reset is a good idea and
fourthly jiteshgawali can you post your bootloader details?

It really is great to see your input guys.
@Far_SighT: I have tried doing the temp_root method, but it doesn't work for me. I could successfully run temp_root.bat just once (luckily, even in boot loop), but next when I tried doing the Juopunutbear SOFF it missed detecting my phone (again, because of the bootloop)
I don''t know where I can get a boot.img file from; for what it's worth, I could only get an OTA zip file for my region/CID from this thread: http://forum.xda-developers.com/showthread.php?t=1764025
@raz0rf1sh: I have done factory reset several times from bootloader, doesn't help friend. I don't have an RUU for my region/CID, all I have is an OTA zip file for my phone from the link I have specified right above this. Can't seem to get an RUU for firmware base 3.33, and CID HTC__038.
@rzr86: Posting all the details I am aware of currently:
PYRAMID PVT SHIP S-ON RL
HBOOT - 1.29.0000
eMMC-boot
Mar 2 2012, 18:14:34
CID - HTC__038
Software version - 3.33.720.106

rzr86 said:
firstly Itsakash he can't S-OFF because the device must be booted to the OS
secondly Far_SighT the command is fastboot flash boot boot.img
thirdly as raz0rf1sh suggested factory reset is a good idea and
fourthly jiteshgawali can you post your bootloader details?
Click to expand...
Click to collapse
Nope
Not necessary to boot into os for s off

Itsakash said:
Nope
Not necessary to boot into os for s off
Click to expand...
Click to collapse
It would help if you can tell me how to do this or direct me to any specific guide

jiteshgawali said:
I have tried doing the temp_root method, but it doesn't work for me. I could successfully run temp_root.bat just once (luckily, even in boot loop), but next when I tried doing the Juopunutbear SOFF it missed detecting my phone (again, because of the bootloop)
Click to expand...
Click to collapse
Did u connected mobile to pc from bootloader??
If yes then I'm helpless may b rzr was right
But in s off section I read somewhere that it doesn't require boot into android
Anyway do PM to Ganeshp he is good guy. I'm damn sure he will help u

jiteshgawali said:
I don''t know where I can get a boot.img file from; for what it's worth, I could only get an OTA zip file for my region/CID from this thread: http://forum.xda-developers.com/showthread.php?t=1764025
Click to expand...
Click to collapse
For stock rom go http://forum.xda-developers.com/showthread.php?t=1923629.
Get the rom and extract boot.img.
Then use the earlier command I posted.

Yes I haven't seen Indian version ruu until now ..so ruu is out of question AFAIK
Now the factory reset over boot loader should help if you have software problems but as per your replies it didn't work it seems
Tried HTC Dev unlock ? Even if the motherboard is replaced its worth a try
If htcdev unlock failed
Then try to go to recovery first ..from boot loader and if you went to recovery properly let me know
The other solution I propose is try to do change the cid ..even on locked bootloader sometimes it works
Try these commands one by one
fastboot oem writecid HTC__001
Then
fastboot reboot-bootloader
Then check cid using this command
fastboot getvar cid
If cid changed that's a good sign
Sent from my Nexus 7 using XDA Premium 4 mobile app

rzr86 said:
secondly Far_SighT the command is fastboot flash boot boot.img
Click to expand...
Click to collapse
I said fastboot boot boot.im instead of fastboot flash boot booti.img as the previous one boots the rom with with the new image but doesn't attempt to write that to the boot partition. Hence it might get him a much needed boot to s-off.

jiteshgawali said:
It really is great to see your input guys.
@Far_SighT: I have tried doing the temp_root method, but it doesn't work for me. I could successfully run temp_root.bat just once (luckily, even in boot loop), but next when I tried doing the Juopunutbear SOFF it missed detecting my phone (again, because of the bootloop)
I don''t know where I can get a boot.img file from; for what it's worth, I could only get an OTA zip file for my region/CID from this thread: http://forum.xda-developers.com/showthread.php?t=1764025
@raz0rf1sh: I have done factory reset several times from bootloader, doesn't help friend. I don't have an RUU for my region/CID, all I have is an OTA zip file for my phone from the link I have specified right above this. Can't seem to get an RUU for firmware base 3.33, and CID HTC__038.
@rzr86: Posting all the details I am aware of currently:
PYRAMID PVT SHIP S-ON RL
HBOOT - 1.29.0000
eMMC-boot
Mar 2 2012, 18:14:34
CID - HTC__038
Software version - 3.33.720.106
Click to expand...
Click to collapse
as you stated your current is 3.33.720.106 so the OTA update is unnecessary
do as ganeshp suggested
Itsakash said:
Did u connected mobile to pc from bootloader??
If yes then I'm helpless may b rzr was right
But in s off section I read somewhere that it doesn't require boot into android
Anyway do PM to Ganeshp he is good guy. I'm damn sure he will help u
Click to expand...
Click to collapse
both S-OFF guides say that stock rom is required in order to follow the S-OFF procedure

ganeshp said:
Yes I haven't seen Indian version ruu until now ..so ruu is out of question AFAIK
Now the factory reset over boot loader should help if you have software problems but as per your replies it didn't work it seems
Tried HTC Dev unlock ? Even if the motherboard is replaced its worth a try
If htcdev unlock failed
Then try to go to recovery first ..from boot loader and if you went to recovery properly let me know
The other solution I propose is try to do change the cid ..even on locked bootloader sometimes it works
Try these commands one by one
fastboot oem writecid HTC__001
Then
fastboot reboot-bootloader
Then check cid using this command
fastboot getvar cid
If cid changed that's a good sign
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for responding Ganesh. HTC Dev Unlock never worked for me post change of motherboard, but thanks for the suggestion.
I am able to browse the recovery option from bootloader properly.
And it gives me a little satisfaction to let you know that I was able to change the CID to HTC__001 following your steps. Can you suggest what I should be doing next?

jiteshgawali said:
Thanks for responding Ganesh. HTC Dev Unlock never worked for me post change of motherboard, but thanks for the suggestion.
I am able to browse the recovery option from bootloader properly.
And it gives me a little satisfaction to let you know that I was able to change the CID to HTC__001 following your steps. Can you suggest what I should be doing next?
Click to expand...
Click to collapse
Great now just download the HTC wwe ruu and install it... I'll link it up in a second.. Watch this space
Here is the link
http://htc.vi8.info/Sensation-XE/RU...0U-11.24A.3504.31-M-release-281004-signed.exe
Sent from my HTC Sensation 4G using XDA Premium 4 mobile app

[Q] Set Telstra HTC One XL to s-off

Hi guys, first time poster - I want to install the following custom rom...
http://forum.xda-developers.com/showthread.php?t=2442946
... and being new to android modding, do not want to brick it by doing something wrong.
I gather i need to set up superCID and then set to s-off - would anyone be able to point me in the right direction on how to do these correctly for a Telstra phone?
My phone is rooted with CWM, from whati gather (it says "ClockworkMod recovery" in recovery mode).
Thanks

jacen72 said:
Hi guys, first time poster - I want to install the following custom rom...
http://forum.xda-developers.com/showthread.php?t=2442946
... and being new to android modding, do not want to brick it by doing something wrong.
I gather i need to set up superCID and then set to s-off - would anyone be able to point me in the right direction on how to do these correctly for a Telstra phone?
My phone is rooted with CWM, from whati gather (it says "ClockworkMod recovery" in recovery mode).
Thanks
Click to expand...
Click to collapse
You might already have SuperCID, you can use a fastboot command to check. The command is:
Code:
fastboot oem readcid
If it comes back as anything other than 11111111 you can use this method to get SuperCID.
Once you have SuperCID you can use this method to get s-off.
Sent from my Evita

timmaaa said:
You might already have SuperCID, you can use a fastboot command to check. The command is:
Code:
fastboot oem readcid
If it comes back as anything other than 11111111 you can use this method to get SuperCID.
Once you have SuperCID you can use this method to get s-off.
Sent from my Evita
Click to expand...
Click to collapse
Thanks, i will take a closer look soon. Is it true that for Telstra phones the CID needs to be 22222222, or is 11111111 okay as well?

jacen72 said:
Thanks, i will take a closer look soon. Is it true that for Telstra phones the CID needs to be 22222222, or is 11111111 okay as well?
Click to expand...
Click to collapse
The 22222222 CID only applies to at&t phones trying to unlock their bootloader via htcdev, this is because at&t stock CID (cws__001) plus 11111111 CID have been blocked at htcdev. For your purposes 11111111 will be fine.
Sent from my Evita

timmaaa said:
The 22222222 CID only applies to at&t phones trying to unlock their bootloader via htcdev, this is because at&t stock CID (cws__001) plus 11111111 CID have been blocked at htcdev. For your purposes 11111111 will be fine.
Sent from my Evita
Click to expand...
Click to collapse
Thanks for the info - i know i need to superCID as i checked last night and CID was TELST001 (from memory). Will use 11111111.

No problems, did you use the fastboot command the check your CID? I only ask because there are apps available which claim to display your CID but they show the original CID, not the current one.
Sent from my Evita

timmaaa said:
No problems, did you use the fastboot command the check your CID? I only ask because there are apps available which claim to display your CID but they show the original CID, not the current one.
Sent from my Evita
Click to expand...
Click to collapse
I tried so many things last night i couldn't tell you exactly what i did, haha! Will try your way and see what it says.
A quick question - in regard to the facepalm link, it says "Download patcher and unzip it in your working directory" - can this be any folder on my phone (eg: Downloads)? I'm also guessing the other file (OneX.zip) goes in the same directory?

No you place the extracted patcher files and the PJ8312000-OneX.zip into your fastboot folder on your pc.
You need to have adb/fastboot and HTC drivers installed on your pc to do the s-off process.
Sent from my Evita

jacen72 said:
I tried so many things last night i couldn't tell you exactly what i did, haha
Click to expand...
Click to collapse
You should keep better track of things you are doing or you will end like NASA on Apollo 1 and not knowing what went wrong.
To repair something you need to know what you did to break it.

Big thanks timmaaa, have upgraded successfully!
twistedddx, you're not wrong - i should have kept an eye on what i was doing. Luckily for me, all went well!
Thanks again.

Glad to see you got it all sorted mate.
Sent from my Evita

Hi guys, since updating Android, i seem to find my service connection (no service) is being lost fairly easily - is there something i need to do in regard to this, or is it just me?!
Cheers

Which ROM are you on?
Sent from my Evita

timmaaa said:
Which ROM are you on?
Sent from my Evita
Click to expand...
Click to collapse
the one from the following link:
http://forum.xda-developers.com/showthread.php?t=2442946

You either need to update your firmware to 2.15 or just flash the Beastmode kernel.
Sent from my Evita

timmaaa said:
You either need to update your firmware to 2.15 or just flash the Beastmode kernel.
Sent from my Evita
Click to expand...
Click to collapse
Thanks, when you talk about beastmode, is the following link what you are referring to?
http://forum.xda-developers.com/showthread.php?t=1797251
Also, with firmware 2.15 - i would actually like to keep it as stock as possible, so perhaps the firmware upgrade would be the better option? I have found a link that looks like it goes to the correct download:
http://forum.xda-developers.com/showthread.php?p=45646878 - (see last post)
Would i be right in saying the instructions for updating the kernel would be the same as at the following link:
http://forum.xda-developers.com/showthread.php?t=2423735 - (OPTIONAL: Installing the Firmware)
Thanks again for your help.

The first link is incorrect, you can find the Beastmode kernel in our development section. The kernel you just install in recovery.
The last link you quoted is where you'll find the 2.15 firmware, and the install instructions see in the first post on that thread (it's a manual install using fastboot).
Sent from my Evita

timmaaa said:
The first link is incorrect, you can find the Beastmode kernel in our development section. The kernel you just install in recovery.
The last link you quoted is where you'll find the 2.15 firmware, and the install instructions see in the first post on that thread (it's a manual install using fastboot).
Sent from my Evita
Click to expand...
Click to collapse
Thanks - looks easy enough. Can i ask what why i would install Beastmode instead of the firmware upgrade? From what i gather, it is to overclock the CPU?

You can leave the Beastmode settings stock, it's just an easier and safer fix rather than upgrading firmware. You can OC if you wish to of course. There's always a small risk involved with anything that touches your hboot.
Sent from my Evita

timmaaa said:
You can leave the Beastmode settings stock, it's just an easier and safer fix rather than upgrading firmware. You can OC if you wish to of course. There's always a small risk involved with anything that touches your hboot.
Sent from my Evita
Click to expand...
Click to collapse
Thanks, maybe i will install beastmode instead then if it will help fix my connection issues. Sorry, but would you be able to point in the direction of where it is in the development section, i cannot seem to find it.
I promise if this works you wont have to hear my noob questions anymore!!