nexus s cant connect to usb (android 4) - Nexus S Q&A, Help & Troubleshooting

hi!
I have a nexus s , i9023 . i have never tried to connect it to my pc, last week i updated it to 4.0.4 (OTA). now i want to connect my phone to my computer but wenn i connect it , nothing happens!!! really nothing!! and i cant find any related setting on my phone!
I have a lots of thing to transfer to my PC but i cant connect it!
please help me!

Have you install USB Driver?
I suggest PDANet, you can find it here LINK

using nexusshacks.com to download your adb interface.
Just scan around it is there.
After that, when you plug in your phone. It should say do you want to turn on USB storage. Just click on the big green tab and your SD card should be mounted and connected to the computer

Related

[Q] USB connection related problems

hello,i have several problems that are making me very angry.i use updated windows 7 32 bit.
1.i have samsung kies and my device was working normaly,but then today when i connected my phone to pc i got code 43 error device not recognized.i tryed reinstalling kies uninstalling drivers re installing nothing helps i cant even connect when i am in download mode same error.I NEED SOME ANSWERS ASAP COZ IT IS DRIVING ME CRAZY.
2.this one is bit smaller but also annoying,it was happening while usb connection was still working,when i connect my phone(any mode kies or mass storage),then when i copy files from pc to phone it working fine,but when i try to copy something from phone to pc i get random disconnects (connection loss) there is no logical explenation coz its totally random,lets say i copy 100 pics i get dc after 10 then i reconnect phone and click retry he copy 15 more and dc again.
Any1 will any solution plz help coz my phone is at mess atm and cant flash anything.
the source of the usb issue may be your computer.
1) did you always use the same usb port for your phone?
2) how old is your computer?
3) do you live in a humid environment?
I live on guam, and on my older laptop (only two years old!!!), running winxp, 3 of 4 usb ports are no longer usable due to corrosion. they give errors and even when working, sometimes I could lose the connection by moving the cable slightly. also, the last usb port is now getting difficult to use because it's hard to plug in anything
so, if you answered yes to #1, try another port and be prepared to install the drivers again.
if you answered yes to #3, be prepared to replace your usb if they are indeed corroded
well thnx for answer,but my pc is new like 7 months old,usb ports are working just switched mouse and phone mouse working phone not.its driver relater before i had that error and some1 from xda told me to delete everything(kies drivers) related to phone and his drivers and it worked i also see that error(code 43 is common) but fix with uninstalling driver(worked before now doesnt).thing is that something at that moment didnt work well on phone(last time it was my external sd card had to format it)and now pc keeps repeating same error.simply even tho all drivers are installed i get device not recognized,and under device manager it unknown device,also when i tick option to see hidden devices i see omap 3630 but state is unconnected.
xGiox said:
1.i have samsung kies and my device was working normaly,but then today when i conne.............
2.this one is bit smaller but also annoying,it was happening while usb connection was still working,....................
Click to expand...
Click to collapse
When transferring files to and from pc, do you use the original USB cable that came with the phone? Because when i use other cables, i have this issue, when i use the original cable, no probs at all.
if that also doesnt work, try formatting internal and external SD cards
xGiox said:
well thnx for answer,but my pc is new like 7 months old,usb ports are working just switched mouse and phone mouse working phone not.its driver relater before i had that error and some1 from xda told me to delete everything(kies drivers) related to phone and his drivers and it worked i also see that error(code 43 is common) but fix with uninstalling driver(worked before now doesnt).thing is that something at that moment didnt work well on phone(last time it was my external sd card had to format it)and now pc keeps repeating same error.simply even tho all drivers are installed i get device not recognized,and under device manager it unknown device,also when i tick option to see hidden devices i see omap 3630 but state is unconnected.
Click to expand...
Click to collapse
Jack_Random said:
When transferring files to and from pc, do you use the original USB cable that came with the phone? Because when i use other cables, i have this issue, when i use the original cable, no probs at all.
if that also doesnt work, try formatting internal and external SD cards
Click to expand...
Click to collapse
i use original cable and also i did format both external and internal cards several times my first problem is kinda more important atm.
ok i tried connecting my phone to secondary pc running xp gave me same error but simple uninstall of driver and reinstall made it work cant fix it on win 7.
Edit: damn phone wont connect when in download mode cant flash anything -.-.
Connect the phone and go to device manager
If you see the i9003 driver uninstall it then connect the phone to pc again
now windows 7 will download the driver automatically
that's how I fixed my problem

[Q] Problem connecting through USB

Hey guys, I have a galaxy 3 with CM7 (kyrillos release) and I'm having a problem when using the phone to transfer files...
When I connect it to any PC without Kies, windows start searching for drivers, but it doesn't find anything, so the phone isn't recognized, and I can't transfer files...
In my pc, with Kies installed, I connected the phone and windows started searching for drivers and found, installed them and it's working fine...
So, what could be done to connect the phone sucessfully in other PCs without Kies?
Thanks
just install kies , it contains some drivers for your sd so the pc can see the sd..otherwise you could use a card reader and connect you sd straight to your pc/laptop
or else got to this thread and download the driver directly
There is no way to get USB storage working without downloading any files?
So I would need to carry with me a pendrive with the driver?!
yes if you don't have internet connection. All usb devices need a driver...
but when I put a pendrive, windows find the driver... but, when I put the phone, windows does not find
there are a few thousand drivers preloaded in windows to increase support out of the box for many devices, it's impossible to include every driver though
i think pendrives use a generic driver anyways
reflash the phone
install adb drivers for samsung in your pc
connect your phone to pc
u can find a small driver pack from google with only 10+m
Sent from my GT-I5800 using XDA App
I think there is no way to conect the phone to pc using cable without installing the drivers. But there is an app that can help you on your purpose, it's the AirDroid, you can find it in the market. With this app you just need to conect to the same wireless network as the computer you want to transfer files, and you're able to transfer files using the internet browser, and others stuff like manage contacts, messages, ringtones, apps...

how to use usb mass storage

im using samsung galaxy wonder with cyanogenmod9 build 6. i want to know how to transfer file from pc to my phone. when i plug my phone to the pc using usb cable and set my phone to MTP mode i can detect it but when i start to copy files from my pc to my device it is not working.
i heard about the fast charge option and i think i have to disable it, but where can i find the enu to do it. please help me. thank you
have you istalled the samsung driver on your pc?

[Q] Clone Korean Galaxy S4 i9500 Fail to identify chipset and usb drivers

Hi,
Have bought a clone Galaxy s4 i9500 phone. Korean Made
Can connect to pc as usb storage device but not as a phone.I am not able to see the operating system files via usb storage just ordinary files. The phone has not any app buttons just a few games preloaded. When connecting to the internet the Baidu page comes up (Chinese)
The phone has limited settings ie Phone settings, Display, Security, Call settings and Connections
Due to this I am unable to check phone components in order to load drivers to connect or to enable usb debugging mode.
Did reset phone and tried many drivers and connection managers.
Phone memory apparently 1.2M? Memory file use presently 884.01k/1.2M
The phone does not have a file manager.
When connecting to a pc the following settings come up, Charging, U Disk and PC Connecting. PC Connecting under under other devices show as Two Usb Devices when connected. I use xp sp3 on the pc.
Downloaded apk programs to pc then to sd card on phone but unable to open them.
The phone built is as below
Can anybody on the forum identify the phone by the pictures.
Thank you
my gfs has the same phone, the korean version, the correct usb driver is an HTC one... i don't know what i did, but windows auto update downloaded that for me and it worked!!! this is just a first step for me.... now i need to root it, and still not getting it .. and no much ppl can help :| anyway for the driver, i hope it works for you! cheers!

Cannot connect OPO to PC

Hi there!
I used to be able to connect my OPO to my W7 PC. Now I cannot. My OPO original cable is out of service so I have been using a samsung charger and it has worked fine before. Plug in, popup shows, and I can access MTP files. I am aware charge is default and when connect you have to select MTP. But now it isn't even charging.
Ever since I updated to Lineage Marshmallow, I cannot do it. I was able to do it on my work laptop (W10) but on my home PC (W7), cannot anymore. So not sure what I am missing. The same cable is used for both.
-Have Root with usb debug on
-google universal driver installed
-pic of device manager below but cannot browse my phone to install (not recognized)
https://i.imgur.com/DHmV11F.png
Any help would be greatly appreciated
Leeoku said:
Hi there!
I used to be able to connect my OPO to my W7 PC. Now I cannot. My OPO original cable is out of service so I have been using a samsung charger and it has worked fine before. Plug in, popup shows, and I can access MTP files. I am aware charge is default and when connect you have to select MTP. But now it isn't even charging.
Ever since I updated to Lineage Marshmallow, I cannot do it. I was able to do it on my work laptop (W10) but on my home PC (W7), cannot anymore. So not sure what I am missing. The same cable is used for both.
-Have Root with usb debug on
-google universal driver installed
-pic of device manager below but cannot browse my phone to install (not recognized)
https://i.imgur.com/DHmV11F.png
Any help would be greatly appreciated
Click to expand...
Click to collapse
Install mtp drivers(http://www.driverscape.com/download/android-mtp) and update the unknown device with those drivers.
You should always use original cable btw.
https://m.ebay.in/itm/100-Brand-New...us-1-1-One-Plus-One-X-/172481279192?hash=Ng==

Categories

Resources